testing and simulating, improving timing

.gitignore

@@ -10,6 +10,8 @@ x393.prj
 *DEBUG_VDT*
 *.kate-swp
 *.old
+*.new
+*.bad
 *.pyc
 *.pickle
 py393/dbg*

.project

@@ -62,42 +62,42 @@
 		<link>
 			<name>vivado_logs/VivadoBitstream.log</name>
 			<type>1</type>
-			<location>/home/andrey/git/x393/vivado_logs/VivadoBitstream-20151031232832558.log</location>
+			<location>/home/andrey/git/x393/vivado_logs/VivadoBitstream-20151103114104932.log</location>
 		</link>
 		<link>
 			<name>vivado_logs/VivadoOpt.log</name>
 			<type>1</type>
-			<location>/home/andrey/git/x393/vivado_logs/VivadoOpt-20151031232832558.log</location>
+			<location>/home/andrey/git/x393/vivado_logs/VivadoOpt-20151103114104932.log</location>
 		</link>
 		<link>
 			<name>vivado_logs/VivadoOptPhys.log</name>
 			<type>1</type>
-			<location>/home/andrey/git/x393/vivado_logs/VivadoOptPhys-20151031232832558.log</location>
+			<location>/home/andrey/git/x393/vivado_logs/VivadoOptPhys-20151103114104932.log</location>
 		</link>
 		<link>
 			<name>vivado_logs/VivadoOptPower.log</name>
 			<type>1</type>
-			<location>/home/andrey/git/x393/vivado_logs/VivadoOptPower-20151031232832558.log</location>
+			<location>/home/andrey/git/x393/vivado_logs/VivadoOptPower-20151103114104932.log</location>
 		</link>
 		<link>
 			<name>vivado_logs/VivadoPlace.log</name>
 			<type>1</type>
-			<location>/home/andrey/git/x393/vivado_logs/VivadoPlace-20151031232832558.log</location>
+			<location>/home/andrey/git/x393/vivado_logs/VivadoPlace-20151103114104932.log</location>
 		</link>
 		<link>
 			<name>vivado_logs/VivadoRoute.log</name>
 			<type>1</type>
-			<location>/home/andrey/git/x393/vivado_logs/VivadoRoute-20151031232832558.log</location>
+			<location>/home/andrey/git/x393/vivado_logs/VivadoRoute-20151103114104932.log</location>
 		</link>
 		<link>
 			<name>vivado_logs/VivadoSynthesis.log</name>
 			<type>1</type>
-			<location>/home/andrey/git/x393/vivado_logs/VivadoSynthesis-20151031232335810.log</location>
+			<location>/home/andrey/git/x393/vivado_logs/VivadoSynthesis-20151103114104932.log</location>
 		</link>
 		<link>
 			<name>vivado_logs/VivadoTimimgSummaryReportImplemented.log</name>
 			<type>1</type>
-			<location>/home/andrey/git/x393/vivado_logs/VivadoTimimgSummaryReportImplemented-20151031232832558.log</location>
+			<location>/home/andrey/git/x393/vivado_logs/VivadoTimimgSummaryReportImplemented-20151103114104932.log</location>
 		</link>
 		<link>
 			<name>vivado_logs/VivadoTimimgSummaryReportSynthesis.log</name>
@@ -107,7 +107,7 @@
 		<link>
 			<name>vivado_logs/VivadoTimingReportImplemented.log</name>
 			<type>1</type>
-			<location>/home/andrey/git/x393/vivado_logs/VivadoTimingReportImplemented-20150904164653967.log</location>
+			<location>/home/andrey/git/x393/vivado_logs/VivadoTimingReportImplemented-20151101221627109.log</location>
 		</link>
 		<link>
 			<name>vivado_logs/VivadoTimingReportSynthesis.log</name>

.settings/com.elphel.vdt.VivadoRoute.prefs

 VivadoRoute_122_SkipSnapshotRoute=true
 VivadoRoute_123_SkipSnapshotRoute=true
-com.elphel.store.context.VivadoRoute=VivadoRoute_122_SkipSnapshotRoute<-@\#\#@->VivadoRoute_123_SkipSnapshotRoute<-@\#\#@->
+VivadoRoute_125_directive_route=MoreGlobalIterations
+com.elphel.store.context.VivadoRoute=VivadoRoute_122_SkipSnapshotRoute<-@\#\#@->VivadoRoute_123_SkipSnapshotRoute<-@\#\#@->VivadoRoute_125_directive_route<-@\#\#@->
 eclipse.preferences.version=1

compressor_jp/csconvert18a.v

@@ -249,7 +249,7 @@ module csconvert18a(
 
   wire        ystrt,nxtline;
   reg	[7:0] yaddr_r; // address for the external buffer memory to write 16x16x8bit Y data
-  reg         ywe_r;	 // wrire enable of Y data
+  reg         ywe_r;	 // write enable of Y data
   reg   [6:0] caddr_r; // address for the external buffer memory 2x8x8x8bit Cb+Cr data (MSB=0 - Cb, 1 - Cr)
   reg         cwe_r;	 // write enable for CbCr data 
   reg         odd_pix;  // odd pixel (assumes even number of pixels in a line
@@ -267,10 +267,10 @@ module csconvert18a(
   assign n000 =     n000_r;
   assign n255 =     n255_r;
   assign signed_y = signed_y_r;     //  - now signed char, -128(black) to +127 (white)
-  assign yaddr =    yaddr_r;
-  assign ywe =      ywe_r;
-  assign caddr =    caddr_r;
-  assign cwe =      cwe_r;
+  assign yaddr =    yaddr_r2;
+  assign ywe =      ywe_r2;
+  assign caddr =    caddr_r2;
+  assign cwe =      cwe_r2;
   
     dly_16 #(.WIDTH(1)) i_strt_dly0 (.clk(CLK),.rst(1'b0), .dly(4'd15), .din(pre_first_in), .dout(strt_dly[0]));
     dly_16 #(.WIDTH(1)) i_strt_dly1 (.clk(CLK),.rst(1'b0), .dly(4'd15), .din(strt_dly[0]),  .dout(strt_dly[1]));
@@ -532,20 +532,28 @@ Y[1,1]=(0x96*P[1,1]+   0x1d*((P[1,0]+P[1,2])/2 +                 0x4d*((P[0,1] +
 
   reg   [7:0] y;
 //  reg   [7:0] y0;	// bypass in monochrome mode
-  wire  [7:0] y0 = pdc;
+//  wire  [7:0] y0 = pdc;
+  reg  [7:0] y0_r;
 //  wire   [7:0] y0;	// bypass in monochrome mode
   reg   [15:0] y1,y2,y3;
-  wire	[15:0] y_sum =y1+y2+y3;
+  
+// TODO: insert register to ease mm1..3 -> y (OK to delay all outputs). Or is it not using DSP at all?   
+//  wire	[15:0] y_sum =y1+y2+y3;
+  reg   [15:0] y_sum_r;
 //  always @ (posedge CLK) y0 <= pd1_dly; // m1; // equivalent
-  always @ (posedge CLK) y1 <= mm1;
-  always @ (posedge CLK) y2 <= mm2;
-  always @ (posedge CLK) y3 <= mm3;
+//  wire   [7:0] pre_y= mono ? y0 : (y_sum[15:8]+y_sum[7]);
+  wire   [7:0] pre_y= mono ? y0_r : (y_sum_r[15:8]+y_sum_r[7]);
 // making y output signed -128..+127
-  wire   [7:0] pre_y= mono ? y0 : (y_sum[15:8]+y_sum[7]);
-
-  always @ (posedge CLK) y[7:0] <= pre_y[7:0];
 
-  always @ (posedge CLK) signed_y_r[7:0] <= {~pre_y[7], pre_y[6:0]};
+  always @ (posedge CLK) begin
+      y1 <= mm1;
+      y2 <= mm2;
+      y3 <= mm3;
+      y0_r <= pdc;
+      y_sum_r <= y1+y2+y3;
+      y[7:0] <= pre_y[7:0];
+      signed_y_r[7:0] <= {~pre_y[7], pre_y[6:0]};
+  end
 
 
 // Try easier and hope better algorithm of color extractions that should perform better on gradients.
@@ -575,12 +583,21 @@ reg         sub_y;         // output accumulator/subtractor. 0 - load new data,
 wire        cwe0;          // preliminary cwe_r (to be modulated by odd/even pixels)
 reg         cstrt;         //ystrt dealyed by 1
 reg         cnxt;          // nxtline delayed by 1
+reg         pre_sel_cbcrmult1;
+// delaying, for now uing "old" ywe,cwe, yaddr,caddr - registering them on the output
+ 
 always @ (posedge CLK) begin
-  if (~(ywe_r || ystrt || nxtline)) sel_cbcrmult1 <= ~(bayer_phase[1] ^ bayer_phase[0] ^ odd_line);
-  else      sel_cbcrmult1 <= ~sel_cbcrmult1;
+//  if (~(ywe_r || ystrt || nxtline)) sel_cbcrmult1 <= ~(bayer_phase[1] ^ bayer_phase[0] ^ odd_line);
+//  else      sel_cbcrmult1 <= ~sel_cbcrmult1;
+  if (~(ywe_r || ystrt || nxtline)) pre_sel_cbcrmult1 <= ~(bayer_phase[1] ^ bayer_phase[0] ^ odd_line);
+  else      pre_sel_cbcrmult1 <= ~pre_sel_cbcrmult1;
+  
+  sel_cbcrmult1 <=pre_sel_cbcrmult1;
+  
   sub_y <= ~sel_cbcrmult1;
-  cbcrmult1 <= sel_cbcrmult1?y[7:0]:pdc[7:0];
-  cbcrmult1 <= sel_cbcrmult1?y[7:0]:pdc[7:0];
+//  cbcrmult1 <= sel_cbcrmult1?y[7:0]:pdc[7:0];
+  cbcrmult1 <= sel_cbcrmult1?y[7:0]:y0_r[7:0]; // delayed by 1 clock
+  
   if (~ywe_r) use_cr <= ~(bayer_phase[1] ^ odd_line);
 end
 assign      cbcrmult2 = use_cr?m_cr:m_cb;  // maybe will need a register? (use_cr will still be good as it is valid early)
@@ -601,23 +618,38 @@ end
 dly_16 #(.WIDTH(1)) i_cwe0 (.clk(CLK),.rst(1'b0), .dly(4'd1), .din(ywe_r), .dout(cwe0));
 //SRL16 i_cwe0    (.D(ywe_r ),  .Q(cwe0), .A0(1'b1), .A1(1'b0), .A2(1'b0), .A3(1'b0), .CLK(CLK)); // dly=2=1+1
 
-always @ (posedge CLK) begin
+
+
+    always @ (posedge CLK) begin
         cstrt <= ystrt;
         cnxt  <= nxtline;
-      cwe_r <= cwe0 && sub_y; 
+//        cwe_r <= cwe0 && sub_y;
+        cwe_r <= cwe0 && !sel_cbcrmult1;
         caddr_r[2:0]<= cwe0?(caddr_r[2:0]+cwe_r):3'b0;
         if (cstrt)     caddr_r[6] <= ~bayer_phase[1];
         else if (cnxt) caddr_r[6] <= ~caddr_r[6];
         if (cstrt)     caddr_r[5:3] <=3'b0;
         else if (cnxt) caddr_r[5:3] <=(bayer_phase[1]^caddr_r[6])? caddr_r[5:3]:(caddr_r[5:3]+1);
-end
+    end
+// extra signals delayed by 1 clock
+    reg ywe_r2, cwe_r2;
+    reg [6:0] caddr_r2;
+    reg [7:0] yaddr_r2;
+    always @ (posedge CLK) begin
+        ywe_r2 <= ywe_r;
+        cwe_r2 <= cwe_r;
+        yaddr_r2 <= yaddr_r;
+        caddr_r2 <= caddr_r;
+    end
+
+
   always @ (posedge CLK) begin
-    y_eq_0   <= (y0[7:0] == 8'h0);
-    y_eq_255 <= (y0[7:0] == 8'hff);
+    y_eq_0   <= (y0_r[7:0] == 8'h0);
+    y_eq_255 <= (y0_r[7:0] == 8'hff);
     if (strt) n000_r[7:0] <= 8'h0;
-    else if ((n000_r[7:0]!=8'hff) && y_eq_0 && ywe_r) n000_r[7:0] <= n000_r[7:0]+1;
+    else if ((n000_r[7:0]!=8'hff) && y_eq_0 && ywe_r2) n000_r[7:0] <= n000_r[7:0]+1;
     if (strt) n255_r[7:0] <= 8'h0;
-    else if ((n255_r[7:0]!=8'hff) && y_eq_255 && ywe_r) n255_r[7:0] <= n255_r[7:0]+1;
+    else if ((n255_r[7:0]!=8'hff) && y_eq_255 && ywe_r2) n255_r[7:0] <= n255_r[7:0]+1;
   end
 
 

ddr3/ddr3.v

@@ -85,7 +85,7 @@
 * 1.69  SPH      03/19/13    Update tZQCS, tZQinit, tZQoper timing parameters
 * 1.70  SPH      04/08/14    Update tRFC to PRECARGE check
 *****************************************************************************************/
-`define den4096Mb 1
+`include "system_defines.vh" 
 // DO NOT CHANGE THE TIMESCALE
 // MAKE SURE YOUR SIMULATOR USES "PS" RESOLUTION
 `timescale 1ps / 1ps
@@ -121,6 +121,19 @@ module ddr3 (
     //       to select the correct component density before continuing
     ERROR: You must specify component density with +define+den____Mb.
 `endif
+    initial begin
+        $display ("TCK_MIN = %d", TCK_MIN);
+`ifdef sg15E
+        $display ("sg15E = `sg15E");
+`endif  
+    
+`ifdef sg093                              // sg093  is equivalent to the JEDEC DDR3-2133 (14-14-14) speed bin
+        $display ("sg093");
+`elsif sg15E
+        $display ("sg15E");
+`endif          
+    end
+    
     parameter check_strict_mrbits = 1;
     parameter check_strict_timing = 1;
     parameter feature_pasr = 1;

fpga_version.vh

-      parameter FPGA_VERSION =          32'h0393005c; // 250MHz ???
+      parameter FPGA_VERSION =          32'h03930065; // (same rev) all met,  using "old" (non-inverted) phase - OK (full phase range)
+//      parameter FPGA_VERSION =          32'h03930065; // switch phy_top.v (all met) - OK with inverted phase control (reduced phase range)
+//      parameter FPGA_VERSION =          32'h03930064; // switch mcomtr_sequencer.v  (xclk not met) - wrong!
+//      parameter FPGA_VERSION =          32'h03930063; // switch mcntrl_linear_rw.v (met) good, worse mem valid phases 
+//      parameter FPGA_VERSION =          32'h03930062; // (met)debugging - what was broken (using older versions of some files) - mostly OK (some glitches)
+//      parameter FPGA_VERSION =          32'h03930061; // restored bufr instead of bufio for memory high speed clock
+//      parameter FPGA_VERSION =          32'h03930060; // moving CLK1..3 in memory controller MMCM, keeping CLK0 and FB. Stuck at memory calib 
+//      parameter FPGA_VERSION =          32'h0393005f; // restored mclk back to 200KHz, registers added to csconvert18a
+//      parameter FPGA_VERSION =          32'h0393005e; // trying mclk = 225 MHz (was 200MHz) define MCLK_VCO_MULT 18
+//      parameter FPGA_VERSION =          32'h0393005d; // trying mclk = 250 MHz (was 200MHz) define MCLK_VCO_MULT 20
+//      parameter FPGA_VERSION =          32'h0393005c; // 250MHz OK, no timing violations
 //    parameter FPGA_VERSION =          32'h0393005b; // 250MHz Not tested, timing violation in bit_stuffer_escape: xclk -0.808 -142.047 515
 //    parameter FPGA_VERSION =          32'h0393005a; // Trying xclk = 250MHz - timing viloations in xdct393, but particular hardware works
 //    parameter FPGA_VERSION =          32'h03930059; // 'new' (no pclk2x, no xclk2x  clocks) sensor/converter w/o debug - OK

includes/x393_parameters.vh

@@ -138,7 +138,11 @@
     parameter real REFCLK_FREQUENCY = 200.0, // 300.0,
     parameter HIGH_PERFORMANCE_MODE = "FALSE",
     parameter CLKIN_PERIOD =        20, // 10, //ns >1.25, 600<Fvco<1200 // Hardware 150MHz , change to             | 6.667
+`ifdef MCLK_VCO_MULT    
+    parameter CLKFBOUT_MULT =       `MCLK_VCO_MULT ,
+`else    
     parameter CLKFBOUT_MULT =       16,   // 8, // Fvco=Fclkin*CLKFBOUT_MULT_F/DIVCLK_DIVIDE, Fout=Fvco/CLKOUT#_DIVIDE  | 16
+`endif    
     parameter CLKFBOUT_MULT_REF =   16,   // 18,   // 9, // Fvco=Fclkin*CLKFBOUT_MULT_F/DIVCLK_DIVIDE, Fout=Fvco/CLKOUT#_DIVIDE  | 6
     parameter CLKFBOUT_DIV_REF =    4, // 200Mhz 3, // To get 300MHz for the reference clock
 `else
@@ -150,11 +154,12 @@
     parameter CLKFBOUT_DIV_REF =    3, // To get 300MHz for the reference clock
 `endif    
     parameter DIVCLK_DIVIDE=        1,
+    parameter CLKFBOUT_USE_FINE_PS= 0, //1, // 0 - old, 1 - new 
     parameter CLKFBOUT_PHASE =      0.000,
     parameter SDCLK_PHASE =         0.000,
-    parameter CLK_PHASE =           0.000,
+    parameter CLK_PHASE =           0.000, //11.25, /// 0.000,
     parameter CLK_DIV_PHASE =       0.000,
-    parameter MCLK_PHASE =          90.000,
+    parameter MCLK_PHASE =          90.000, //78.75, // 90.000,
     parameter REF_JITTER1 =         0.010,
     parameter SS_EN =              "FALSE",
     parameter SS_MODE =      "CENTER_HIGH",

includes/x393_tasks_mcntrl_timing.vh

@@ -193,12 +193,20 @@
 
     task axi_set_phase;
         input [PHASE_WIDTH-1:0] phase;
-        begin
+        reg   [PHASE_WIDTH-1:0] inverted_phase;
+        begin
+            if (CLKFBOUT_USE_FINE_PS) begin
+                inverted_phase = -phase;
+                $display("SET CLOCK INVERTED PHASE (0x%x) to 0x%x @ %t",phase,inverted_phase,$time);
+                write_contol_register(LD_DLY_PHASE, {{(32-PHASE_WIDTH){1'b0}},inverted_phase}); // control regiter address
+                target_phase <= inverted_phase;
+            end else begin
                 $display("SET CLOCK PHASE to 0x%x @ %t",phase,$time);
                 write_contol_register(LD_DLY_PHASE, {{(32-PHASE_WIDTH){1'b0}},phase}); // control regiter address
-            write_contol_register(DLY_SET,0);
                 target_phase <= phase;
             end
+            write_contol_register(DLY_SET,0);
+        end
     endtask
  
      task axi_set_wbuf_delay;

memctrl/mcntrl393.v

@@ -153,6 +153,7 @@ module  mcntrl393 #(
     parameter CLKFBOUT_DIV_REF =    3, // To get 300MHz for the reference clock
 `endif    
     parameter DIVCLK_DIVIDE=        1,
+    parameter CLKFBOUT_USE_FINE_PS= 1, // 0 - old, 1 - new 
     parameter CLKFBOUT_PHASE =      0.000,
     parameter SDCLK_PHASE =         0.000,
     parameter CLK_PHASE =           0.000,
@@ -1816,6 +1817,7 @@ module  mcntrl393 #(
         .CLKFBOUT_MULT_REF     (CLKFBOUT_MULT_REF),
         .CLKFBOUT_DIV_REF      (CLKFBOUT_DIV_REF),
         .DIVCLK_DIVIDE         (DIVCLK_DIVIDE),
+        .CLKFBOUT_USE_FINE_PS  (CLKFBOUT_USE_FINE_PS),
         .CLKFBOUT_PHASE        (CLKFBOUT_PHASE),
         .SDCLK_PHASE           (SDCLK_PHASE),
         .CLK_PHASE             (CLK_PHASE),

memctrl/mcntrl_linear_rw.v

@@ -177,6 +177,7 @@ module  mcntrl_linear_rw #(
     reg   [FRAME_HEIGHT_BITS-1:0] line_unfinished_r;
     
     wire                          pre_want;
+    reg                           pre_want_r1;
     wire                    [1:0] status_data;
     wire                    [3:0] cmd_a; 
     wire                   [31:0] cmd_data; 
@@ -324,8 +325,9 @@ module  mcntrl_linear_rw #(
     assign frame_done=  frame_done_r;
     assign frame_finished=  frame_finished_r;
     
-//    assign pre_want=    chn_en && busy_r && !want_r && !xfer_start_r[0] && calc_valid && !last_block && !suspend && !frame_start_r[0];
-    assign pre_want=    chn_en && busy_r && !want_r && !xfer_start_r[0] && calc_valid && !last_block && !suspend && !(|frame_start_r);
+//    assign pre_want=    chn_en && busy_r && !want_r && !xfer_start_r[0] && calc_valid && !last_block && !suspend && !(|frame_start_r);
+    // accelerating pre_want:
+    assign pre_want= pre_want_r1 && !want_r && !xfer_start_r[0] && !suspend ;
 
     assign last_in_row_w=(row_left=={{(FRAME_WIDTH_BITS-NUM_XFER_BITS){1'b0}},xfer_num128_r});
     assign last_row_w=  next_y==window_height;
@@ -409,7 +411,7 @@ module  mcntrl_linear_rw #(
 
         if (mrst)                                                  want_r <= 0;
         else if (chn_rst || xfer_grant || start_skip_r)            want_r <= 0;
-        else if (pre_want && (page_cntr>{1'b0,cmd_extra_pages})) want_r <= 1;
+        else if (pre_want && (page_cntr > {1'b0,cmd_extra_pages})) want_r <= 1;
         
     end    
     
@@ -469,6 +471,9 @@ wire    start_not_partial= xfer_start_r[0] && !xfer_limited_by_mem_page_r;
 // now have row start address, bank and row_left ;
 // calculate number to read (min of row_left, maximal xfer and what is left in the DDR3 page    
     always @(posedge mclk) begin
+        // acceletaring pre_want
+        pre_want_r1 <= chn_en &&  !frame_done_r && busy_r && par_mod_r[PAR_MOD_LATENCY-2] && !(|frame_start_r[4:1]) && !last_block;
+    
         if      (mrst)                par_mod_r<=0;
         else if (pgm_param_w ||
                  xfer_start_r[0] ||

memctrl/memctrl16.v

@@ -126,6 +126,7 @@ module  memctrl16 #(
     parameter CLKFBOUT_DIV_REF =    3, // To get 300MHz for the reference clock
 `endif    
     parameter DIVCLK_DIVIDE=        1,
+    parameter CLKFBOUT_USE_FINE_PS= 1, // 0 - old, 1 - new 
     parameter CLKFBOUT_PHASE =      0.000,
     parameter SDCLK_PHASE =         0.000,
     parameter CLK_PHASE =           0.000,
@@ -905,6 +906,7 @@ end
         .CLKFBOUT_MULT_REF             (CLKFBOUT_MULT_REF),
         .CLKFBOUT_DIV_REF              (CLKFBOUT_DIV_REF),
         .DIVCLK_DIVIDE                 (DIVCLK_DIVIDE),
+        .CLKFBOUT_USE_FINE_PS          (CLKFBOUT_USE_FINE_PS),
         .CLKFBOUT_PHASE                (CLKFBOUT_PHASE),
         .SDCLK_PHASE                   (SDCLK_PHASE),
         .CLK_PHASE                     (CLK_PHASE),

memctrl/phy/byte_lane.v

@@ -78,7 +78,27 @@ reg        set_r=0;
 reg  dci_disable_dqs_r, dci_disable_dq_r;
 reg  [7:0] ld_odly=8'b0, ld_idly=8'b0;
 reg        ld_odly_dqs,ld_idly_dqs,ld_odly_dm;
+
 BUFR  iclk_i    (.O(iclk),.I(dqs_read), .CLR(1'b0),.CE(1'b1)); // OK, works with constraint? Seems now work w/o
+/*
+wire iclk_int;
+//BUFR     iclk_int_i (.O(iclk_int), .I(dqs_read), .CLR(1'b0),.CE(1'b1));
+    assign iclk_int = dqs_read && !rst;
+BUFIO    iclk_i     (.O(iclk),     .I(iclk_int));
+CRITICAL WARNING: [Vivado 12-1411] Cannot set LOC property of ports, Could not legally place instance
+mcntrl393_i/memctrl16_i/mcontr_sequencer_i/phy_cmd_i/phy_top_i/byte_lane0_i/dqs_i/iobufs_dqs_i/IBUFDS/IBUFDS_M at N7 (IOB_X1Y120
+since it belongs to a shape containing instance mcntrl393_i/memctrl16_i/mcontr_sequencer_i/phy_cmd_i/phy_top_i/byte_lane0_i/iclk_i.
+The shape requires relative placement between 
+mcntrl393_i/memctrl16_i/mcontr_sequencer_i/phy_cmd_i/phy_top_i/byte_lane0_i/dqs_i/iobufs_dqs_i/IBUFDS/IBUFDS_M and
+mcntrl393_i/memctrl16_i/mcontr_sequencer_i/phy_cmd_i/phy_top_i/byte_lane0_i/iclk_i that cannnot be honored because it would result in
+an invalid location for mcntrl393_i/memctrl16_i/mcontr_sequencer_i/phy_cmd_i/phy_top_i/byte_lane0_i/iclk_i. [x393.xdc:193]
+----------
+ERROR: [DRC 23-20] Rule violation (RTSTAT-1) Unrouted net - 2 net(s) are unrouted. The problem bus(es) and/or net(s) are 
+mcntrl393_i/memctrl16_i/mcontr_sequencer_i/phy_cmd_i/phy_top_i/byte_lane1_i/iclk_int,
+mcntrl393_i/memctrl16_i/mcontr_sequencer_i/phy_cmd_i/phy_top_i/byte_lane0_i/iclk_int.
+
+
+*/
 wire [9:0] decode_sel={
     (dly_addr[3:0]==9)?1'b1:1'b0,
     (dly_addr[3:0]==8)?1'b1:1'b0,

memctrl/phy/mcontr_sequencer.v

@@ -80,6 +80,7 @@ module  mcontr_sequencer   #(
     parameter CLKFBOUT_MULT_REF =   9, // Fvco=Fclkin*CLKFBOUT_MULT_F/DIVCLK_DIVIDE, Fout=Fvco/CLKOUT#_DIVIDE
     parameter CLKFBOUT_DIV_REF =    3, // To get 300MHz for the reference clock
     parameter DIVCLK_DIVIDE=        1,
+    parameter CLKFBOUT_USE_FINE_PS= 1, // 0 - old, 1 - new 
     parameter CLKFBOUT_PHASE =      0.000,
     parameter SDCLK_PHASE =         0.000,
     parameter CLK_PHASE =           0.000,
@@ -551,9 +552,9 @@ module  mcontr_sequencer   #(
         .CLKFBOUT_MULT_REF     (CLKFBOUT_MULT_REF),
         .CLKFBOUT_DIV_REF      (CLKFBOUT_DIV_REF),
         .DIVCLK_DIVIDE         (DIVCLK_DIVIDE),
+        .CLKFBOUT_USE_FINE_PS (CLKFBOUT_USE_FINE_PS),
         .CLKFBOUT_PHASE        (CLKFBOUT_PHASE),
         .SDCLK_PHASE           (SDCLK_PHASE), /// debugging
-        
         .CLK_PHASE             (CLK_PHASE),
         .CLK_DIV_PHASE         (CLK_DIV_PHASE),
         .MCLK_PHASE            (MCLK_PHASE),

memctrl/phy/phy_cmd.v

@@ -36,6 +36,7 @@ module  phy_cmd#(
     parameter CLKFBOUT_MULT_REF =   9, // Fvco=Fclkin*CLKFBOUT_MULT_F/DIVCLK_DIVIDE, Fout=Fvco/CLKOUT#_DIVIDE
     parameter CLKFBOUT_DIV_REF =    3, // To get 300MHz for the reference clock
     parameter DIVCLK_DIVIDE=        1,
+    parameter CLKFBOUT_USE_FINE_PS= 1, // 0 - old, 1 - new 
     parameter CLKFBOUT_PHASE =      0.000,
     parameter SDCLK_PHASE =         0.000,
     parameter CLK_PHASE =           0.000,
@@ -379,6 +380,7 @@ module  phy_cmd#(
         .CLKFBOUT_MULT_REF(CLKFBOUT_MULT_REF),
         .CLKFBOUT_DIV_REF (CLKFBOUT_DIV_REF),
         .DIVCLK_DIVIDE    (DIVCLK_DIVIDE),
+        .CLKFBOUT_USE_FINE_PS (CLKFBOUT_USE_FINE_PS),
         .CLKFBOUT_PHASE   (CLKFBOUT_PHASE),
         .SDCLK_PHASE      (SDCLK_PHASE),
         .CLK_PHASE        (CLK_PHASE),

memctrl/phy/phy_top.v

@@ -43,6 +43,7 @@ module  phy_top #(
     parameter CLKFBOUT_MULT_REF =   9, // Fvco=Fclkin*CLKFBOUT_MULT_F/DIVCLK_DIVIDE, Fout=Fvco/CLKOUT#_DIVIDE
     parameter CLKFBOUT_DIV_REF =    3, // To get 300MHz for the reference clock
     parameter DIVCLK_DIVIDE=        1,
+    parameter CLKFBOUT_USE_FINE_PS =1, // if 1 move CLKFBOUT_PHASE and SDCLK_PHASE, if 0 - other outputs (moved phases should be 0/same)
     parameter CLKFBOUT_PHASE =      0.000,
     parameter SDCLK_PHASE =         0.000,
     parameter CLK_PHASE =           0.000,
@@ -312,6 +313,7 @@ wire sdclk; // BUFIO
 // So shifting phase dynamically by plus/- 113 moves SDCLK by a full period (2.5ns) forward and backward (113= 0x71)
 wire clk_pre, clk_div_pre, sdclk_pre, mclk_pre, clk_fb;
 BUFR clk_bufr_i (.O(clk), .CE(), .CLR(), .I(clk_pre));
+//BUFIO clk_buf_i (.O(clk), .I(clk_pre));
 BUFR clk_div_bufr_i (.O(clk_div), .CE(), .CLR(), .I(clk_div_pre));
 BUFIO iclk_bufio_i (.O(sdclk), .I(sdclk_pre) );
 //BUFIO clk_ref_i (.O(ref_clk), .I(clk_ref_pre));
@@ -325,19 +327,21 @@ BUFG mclk_i (.O(mclk),.I(mclk_pre) );
         .BANDWIDTH           (BANDWIDTH),
         .CLKFBOUT_MULT_F     (CLKFBOUT_MULT),
         .DIVCLK_DIVIDE       (DIVCLK_DIVIDE),
-        .CLKFBOUT_PHASE      (CLKFBOUT_PHASE),
-        .CLKOUT0_PHASE       (SDCLK_PHASE),
-        .CLKOUT1_PHASE       (CLK_PHASE),
-        .CLKOUT2_PHASE       (CLK_DIV_PHASE),
-        .CLKOUT3_PHASE       (MCLK_PHASE),
+        .CLKFBOUT_PHASE      (CLKFBOUT_USE_FINE_PS? 0.0 :           CLKFBOUT_PHASE),
+        .CLKOUT0_PHASE       (CLKFBOUT_USE_FINE_PS? 0.0 :           SDCLK_PHASE),
+        .CLKOUT1_PHASE       (CLKFBOUT_USE_FINE_PS? CLK_PHASE :     0.0),
+        .CLKOUT2_PHASE       (CLKFBOUT_USE_FINE_PS? CLK_DIV_PHASE : 0.0),
+        .CLKOUT3_PHASE       (CLKFBOUT_USE_FINE_PS? MCLK_PHASE :   90.000), // (78.75), // (MCLK_PHASE), // should be multiple of 11.25 (90.000/8)
+//ERROR: [DRC 23-20] Rule violation (AVAL-139) Phase shift check - The MMCME2_ADV cell mcntrl393_i/memctrl16_i/mcontr_sequencer_i/phy_cmd_i/phy_top_i/mmcm_phase_cntr_i/MMCME2_ADV_i has a fractional CLKOUT3_PHASE value (75.000)  with CLKOUT3_USE_FINE_PS set to FALSE. It should be a multiple of [45 / CLKOUT3_DIVIDE] = [45 / 4] = 11.250.
+        
 //        .CLKOUT4_PHASE          (0.000),
 //        .CLKOUT5_PHASE          (0.000),
 //        .CLKOUT6_PHASE          (0.000),
-        .CLKFBOUT_USE_FINE_PS     ("FALSE"),
-        .CLKOUT0_USE_FINE_PS      ("FALSE"),
-        .CLKOUT1_USE_FINE_PS ("TRUE"),
-        .CLKOUT2_USE_FINE_PS ("TRUE"),
-        .CLKOUT3_USE_FINE_PS ("TRUE"),
+        .CLKFBOUT_USE_FINE_PS (CLKFBOUT_USE_FINE_PS? "TRUE" : "FALSE"),
+        .CLKOUT0_USE_FINE_PS  (CLKFBOUT_USE_FINE_PS? "TRUE" : "FALSE"),
+        .CLKOUT1_USE_FINE_PS  (CLKFBOUT_USE_FINE_PS? "FALSE" : "TRUE"),
+        .CLKOUT2_USE_FINE_PS  (CLKFBOUT_USE_FINE_PS? "FALSE" : "TRUE"),
+        .CLKOUT3_USE_FINE_PS  (CLKFBOUT_USE_FINE_PS? "FALSE" : "TRUE"),
 //        .CLKOUT4_USE_FINE_PS("FALSE"),
 //        .CLKOUT5_USE_FINE_PS("FALSE"),
 //        .CLKOUT6_USE_FINE_PS("FALSE"),

py393/import_verilog_parameters.py

@@ -393,6 +393,11 @@ class ImportVerilogParameters(object):
         # Try binary operation 
         # repeat until end of line or ')'
             while True:
+                try:
+                    opStart=skipWS(operand1[2])
+                except:
+                    print("line=\n",line)
+                    print("defines=\n",self.defines)
                 opStart=skipWS(operand1[2])
                 if (opStart == len(line)) : # or (line[opStart] == ')'): # just primary
                     return operand1
@@ -485,7 +490,7 @@ class ImportVerilogParameters(object):
 # Macro substitution excluding the very first character
             if "`" in line [1:]:
                 for define in self.defines:
-                    line.replace("`"+define,self.defines[define])
+                    line = line.replace("`"+define,self.defines[define])
             if line[0]== "`":
                 tokens=line[1:].replace("\t"," ").split(" ",1) #second tokens
                 for i in (1,2): 

py393/x393_mcntrl_adjust.py

@@ -1361,6 +1361,8 @@ class X393McntrlAdjust(object):
             y=a*phase+b
             y0=y
             #find the lowest approximate solution to consider
+            if (quiet <2):
+                print("phase= %d, y=%f, variantStep=%f"%(phase,y,variantStep))
             if y0 > (-max_dly_err):
                 while (y0 >= (variantStep-max_dly_err)):
                     y0 -= variantStep
@@ -1369,6 +1371,8 @@ class X393McntrlAdjust(object):
                 while (y0<(-max_dly_err)):
                     y0 += variantStep
                     periods += 1
+            if (quiet <2):
+                print("y0=%f"%(y0))
             dly_min= max(0,int(y0-4.5))
             dly_max= min(max_lin_dly,int(y0+5.5))
             dly_to_try=[]

py393/x393_mcntrl_timing.py

@@ -88,6 +88,12 @@ class X393McntrlTiming(object):
         if phase is None:
             phase= vrlg.get_default("DLY_PHASE") 
         vrlg.DLY_PHASE=phase & ((1<<vrlg.PHASE_WIDTH)-1)
+        if vrlg.CLKFBOUT_USE_FINE_PS:
+            phase_value = (-vrlg.DLY_PHASE) & ((1<<vrlg.PHASE_WIDTH)-1)
+            if quiet<2:
+                print("SET INVERTED CLOCK PHASE=0x%x (actual value is 0x%x)"%(vrlg.DLY_PHASE, phase_value))
+            self.x393_axi_tasks.write_control_register(vrlg.LD_DLY_PHASE, phase_value) # {{(32-PHASE_WIDTH){1'b0}},phase}); // control register address
+        else:    
             if quiet<2:
                 print("SET CLOCK PHASE=0x%x"%(vrlg.DLY_PHASE))
             self.x393_axi_tasks.write_control_register(vrlg.LD_DLY_PHASE,vrlg.DLY_PHASE) # {{(32-PHASE_WIDTH){1'b0}},phase}); // control register address
@@ -106,6 +112,9 @@ class X393McntrlTiming(object):
         <wait_seq> read and re-send status request to make sure status reflects new data (just for testing, too fast for Python)
         Returns 1 if success, 0 if timeout
         """
+        if vrlg.CLKFBOUT_USE_FINE_PS:
+            patt = 0x3000000 | ((-vrlg.DLY_PHASE) & 0xff)
+        else:    
             patt = 0x3000000 | vrlg.DLY_PHASE
         mask = 0x3000100
         if check_phase_value:
@@ -452,6 +461,9 @@ class X393McntrlTiming(object):
         Wait until clock phase shifter is ready
         """
         data=self.x393_axi_tasks.read_status(vrlg.MCONTR_PHY_STATUS_REG_ADDR)
+        expected_phase = vrlg.DLY_PHASE
+        if (vrlg.CLKFBOUT_USE_FINE_PS):
+            expected_phase = (-expected_phase) & 0xff;
         while (((data & vrlg.STATUS_PSHIFTER_RDY_MASK) == 0) or (((data ^ vrlg.DLY_PHASE) & 0xff) != 0)):
             data=self.x393_axi_tasks.read_status(vrlg.MCONTR_PHY_STATUS_REG_ADDR)
             if self.DRY_MODE: break

system_defines.vh

@@ -9,6 +9,16 @@
 //  `define USE_PCLK2X
 //  `define USE_XCLK2X
 //  `define DEBUG_RING 1
+//  `define MCLK_VCO_MULT 16
+// DDR3 memory speed grade and density
+    `define sg25 1
+//  `define sg15E  1
+//  `define sg187E  1
+  `define den4096Mb 1  
+  
+  `define MCLK_VCO_MULT 16
+//  `define MCLK_VCO_MULT 18
+//  `define MCLK_VCO_MULT 20
     
   `define MEMBRIDGE_DEBUG_WRITE 1
 // Enviroment-dependent options

util_modules/fifo_1cycle.v

@@ -30,7 +30,7 @@ module fifo_1cycle
     (
   input                   rst,      // reset, active high
   input                   clk,      // clock - positive edge
-  input                   srst,     // sync reset
+  input                   sync_rst, // sync reset
   input                   we,       // write enable
   input                   re,       // read enable
   input  [DATA_WIDTH-1:0] data_in,  // input data
@@ -61,20 +61,20 @@ module fifo_1cycle
     
     always @ (posedge  clk or posedge  rst) begin
       if      (rst)      fill <= 0;
-      else if (srst) fill <= 0;
+      else if (sync_rst) fill <= 0;
       else               fill <= next_fill;
       
       if      (rst)      wa <= 0;
-      else if (srst) wa <= 0;
+      else if (sync_rst) wa <= 0;
       else if (we)       wa <= wa+1;
       
       if      (rst)      ra <=  0;
-      else if (srst) ra <=  0;
+      else if (sync_rst) ra <=  0;
       else if (re)       ra <= ra+1;
       else if (fill==0)  ra <= wa; // Just recover from bit errors
       
       if      (rst)      nempty <= 0;
-      else if (srst) nempty <= 0;
+      else if (sync_rst) nempty <= 0;
       else               nempty <= (next_fill!=0);
 
 

util_modules/fifo_same_clock.v

@@ -55,7 +55,7 @@ module fifo_same_clock
     reg  [DATA_WIDTH-1:0] outreg;
     reg  [DATA_DEPTH-1:0] ra;
     reg  [DATA_DEPTH-1:0] wa;
-    wire [DATA_DEPTH-1:0] next_fill;
+//    wire [DATA_DEPTH-1:0] next_fill;
     reg  wem;
     wire rem;
     reg  out_full=0; //output register full
@@ -63,7 +63,7 @@ module fifo_same_clock
     
     reg  ram_nempty;
     
-    assign next_fill = fill[DATA_DEPTH-1:0]+((wem && ~rem)?1:((~wem && rem && ram_nempty)?-1:0));
+//    assign next_fill = fill[DATA_DEPTH-1:0]+((wem && ~rem)?1:((~wem && rem && ram_nempty)?-1:0));
     assign rem= ram_nempty && (re || !out_full); 
     assign data_out=outreg;
     assign nempty=out_full;
@@ -75,7 +75,9 @@ module fifo_same_clock
     always @ (posedge  clk or posedge  rst) begin
       if      (rst)          fill <= 0;
       else if (sync_rst)     fill <= 0;
-      else               fill <= next_fill;
+//      else               fill <= next_fill;
+      else if ( wem && ~rem) fill <= fill + 1;
+      else if (~wem &&  rem) fill <= fill - 1;
       
       if (rst)           wem <= 0;
       else if (sync_rst) wem <= 0;
@@ -83,7 +85,9 @@ module fifo_same_clock
       
       if   (rst)         ram_nempty <= 0;
       else if (sync_rst) ram_nempty <= 0;
-      else               ram_nempty <= (next_fill != 0);
+//      else               ram_nempty <= (next_fill != 0);
+//      else               ram_nempty <= wem || (|fill[DATA_DEPTH-1:1]) || (fill[0] && !rem);
+      else               ram_nempty <= (|fill[DATA_DEPTH-1:1]) || (fill[0] && wem) || ((fill[0] || wem) && !rem) ;
      
       if (rst)           wa <= 0;
       else if (sync_rst) wa <= 0;

util_modules/status_router16.v

@@ -84,7 +84,9 @@ module  status_router16(
     wire   [1:0] rq_int;
     wire   [1:0] start_int;  // only for the first cycle, combinatorial
 
-    status_router2 status_router2_top_i (
+    status_router2 #(
+        .FIFO_TYPE ("TWO_CYCLE") //= "ONE_CYCLE" // higher latency, but easier timing - use on some levels (others - default "ONE_CYCLE")
+    ) status_router2_top_i (
         .rst       (rst), // input
         .clk       (clk), // input
         .srst      (srst), // input

util_modules/status_router2.v

@@ -22,7 +22,9 @@
 `timescale 1ns/1ps
 `include "system_defines.vh" 
 //`define DEBUG_FIFO 1
-module  status_router2 (
+module  status_router2 #(
+    parameter FIFO_TYPE = "ONE_CYCLE" // "TWO_CYCLE"
+)(
     input        rst,
     input        clk,
     input        srst,      // sync reset
@@ -99,26 +101,28 @@ module  status_router2 (
     end
     
 /* fifo_same_clock has currently latency of 2 cycles, use smth. faster here? - fifo_1cycle (but it has unregistered data output) */
+    generate
+        if (FIFO_TYPE == "ONE_CYCLE") begin
             fifo_1cycle #(
                 .DATA_WIDTH(9),
                 .DATA_DEPTH(4) // 16
             ) fifo_in0_i (
                 .rst       (1'b0),                                // rst), // input
                 .clk       (clk),                                 // input
-        .srst      (srst), // input
+                .sync_rst  (srst),                                // input
                 .we        (start_rcv[0] || rcv_rest_r[0]),       // input
                 .re        (fifo_re[0]),                          // input
                 .data_in   ({rcv_rest_r[0] & ~rq_in[0], db_in0}), // input[8:0] MSB marks last byte
                 .data_out  ({fifo_last_byte[0],fifo0_out}),       // output[8:0]
-        .nempty    (fifo_nempty_pre[0]), // output
+                .nempty    (fifo_nempty_pre[0]),                  // output reg
                 .half_full (fifo_half_full[0])                    // output reg 
-`ifdef DEBUG_FIFO
+        `ifdef DEBUG_FIFO
                 ,.under(),     // output reg 
                 .over(),       // output reg 
                 .wcount(),     // output[3:0] reg 
                 .rcount(),     // output[3:0] reg 
                 .num_in_fifo() // output[3:0]
-`endif         
+        `endif         
             );
         
             fifo_1cycle #(
@@ -127,21 +131,67 @@ module  status_router2 (
             ) fifo_in1_i (
                 .rst       (1'b0),                                // rst), // input
                 .clk       (clk),                                 // input
-        .srst      (srst), // input
+                .sync_rst  (srst),                                // input
                 .we        (start_rcv[1] || rcv_rest_r[1]),       // input
                 .re        (fifo_re[1]),                          // input
                 .data_in   ({rcv_rest_r[1] & ~rq_in[1], db_in1}), // input[8:0] MSB marks last byte
                 .data_out  ({fifo_last_byte[1],fifo1_out}),       // output[8:0]
-        .nempty    (fifo_nempty_pre[1]), // output
+                .nempty    (fifo_nempty_pre[1]),                  // output reg
                 .half_full (fifo_half_full[1])                    // output reg 
-`ifdef DEBUG_FIFO
+        `ifdef DEBUG_FIFO
                 ,.under(),     // output reg 
                 .over(),       // output reg 
                 .wcount(),     // output[3:0] reg 
                 .rcount(),     // output[3:0] reg 
                 .num_in_fifo() // output[3:0]
-`endif         
+        `endif         
             );
+        end else begin
+            fifo_same_clock #(
+                .DATA_WIDTH(9),
+                .DATA_DEPTH(4) // 16
+            ) fifo_in0_i (
+                .rst       (1'b0),                                // rst), // input
+                .clk       (clk),                                 // input
+                .sync_rst  (srst),                                // input
+                .we        (start_rcv[0] || rcv_rest_r[0]),       // input
+                .re        (fifo_re[0]),                          // input
+                .data_in   ({rcv_rest_r[0] & ~rq_in[0], db_in0}), // input[8:0] MSB marks last byte
+                .data_out  ({fifo_last_byte[0],fifo0_out}),       // output[8:0]
+                .nempty    (fifo_nempty_pre[0]),                  // output reg
+                .half_full (fifo_half_full[0])                    // output reg 
+        `ifdef DEBUG_FIFO
+                ,.under(),     // output reg 
+                .over(),       // output reg 
+                .wcount(),     // output[3:0] reg 
+                .rcount(),     // output[3:0] reg 
+                .num_in_fifo() // output[3:0]
+        `endif         
+            );
+        
+            fifo_same_clock #(
+                .DATA_WIDTH(9),
+                .DATA_DEPTH(4) // 16
+            ) fifo_in1_i (
+                .rst       (1'b0),                                // rst), // input
+                .clk       (clk),                                 // input
+                .sync_rst  (srst),                                // input
+                .we        (start_rcv[1] || rcv_rest_r[1]),       // input
+                .re        (fifo_re[1]),                          // input
+                .data_in   ({rcv_rest_r[1] & ~rq_in[1], db_in1}), // input[8:0] MSB marks last byte
+                .data_out  ({fifo_last_byte[1],fifo1_out}),       // output[8:0]
+                .nempty    (fifo_nempty_pre[1]),                  // output reg
+                .half_full (fifo_half_full[1])                    // output reg 
+        `ifdef DEBUG_FIFO
+                ,.under(),     // output reg 
+                .over(),       // output reg 
+                .wcount(),     // output[3:0] reg 
+                .rcount(),     // output[3:0] reg 
+                .num_in_fifo() // output[3:0]
+        `endif         
+            );
+        end
+    endgenerate
     
 // one car per green (round robin priority)
 // start sending out with  with one cycle latency - now 2 cycles because of the FIFO

util_modules/status_router4.v

@@ -47,7 +47,9 @@ module  status_router4(
     wire   [1:0] rq_int;
     wire   [1:0] start_int;  // only for the first cycle, combinatorial
 
-    status_router2 status_router2_top_i (
+    status_router2  #(
+        .FIFO_TYPE ("TWO_CYCLE") //= "ONE_CYCLE" // higher latency, but easier timing - use on some levels (others - default "ONE_CYCLE")
+    ) status_router2_top_i (
         .rst       (rst), // input
         .clk       (clk), // input
         .srst      (srst), // input

util_modules/status_router8.v

@@ -59,7 +59,9 @@ module  status_router8(
     wire   [1:0] rq_int;
     wire   [1:0] start_int;  // only for the first cycle, combinatorial
 
-    status_router2 status_router2_top_i (
+    status_router2 #(
+        .FIFO_TYPE ("ONE_CYCLE") //= "ONE_CYCLE" // higher latency, but easier timing - use on some levels (others - default "ONE_CYCLE")
+    ) status_router2_top_i  (
         .rst       (rst), // input
         .clk       (clk), // input
         .srst      (srst), // input

util_modules/sync_resets.v

@@ -32,7 +32,8 @@ module  sync_resets#(
 );
     reg                 en_locked=0; // mostly for simulation, locked[0] is 1'bx until the first clock[0] pulse
     wire    [WIDTH-1:0] rst_w;  // resets matching input clocks
-    wire                rst_early_master;
+    wire                rst_early_master_w;
+    reg                 rst_early_master;
     assign rst = rst_w;
     reg                mrst = 1;
     always @ (posedge arst or posedge clk[0]) begin
@@ -43,13 +44,16 @@ module  sync_resets#(
         if (arst) mrst <= 1;
         else      mrst <=  ~(locked[0] && en_locked);
     end
+    always @(posedge clk[0]) begin
+        rst_early_master <= rst_early_master_w;
+    end
     level_cross_clocks #(
         .WIDTH      (1),
         .REGISTER   (REGISTER)
     ) level_cross_clocks_mrst_i (
         .clk   (clk[0]),  // input
         .d_in  (mrst),    // input[0:0] 
-        .d_out (rst_early_master) // output[0:0] 
+        .d_out (rst_early_master_w) // output[0:0] 
     );
     
     generate
@@ -57,7 +61,7 @@ module  sync_resets#(
         for (i = 1; i < WIDTH; i = i + 1) begin: rst_block
             level_cross_clocks #(
                 .WIDTH      (1),
-                .REGISTER   (REGISTER)
+                .REGISTER   ((i==5) ? 1: REGISTER) // disable for aclk
             ) level_cross_clocks_rst_i (
                 .clk   (clk[i]),                                  // input
                 .d_in  (mrst || rst_early_master || ~locked[i] ), // input[0:0] 

wrap/ddr3_wrap.v

@@ -276,7 +276,8 @@ module  ddr3_wrap#(
     assign #(DQS_IN_DELAY_H) DQSU =  en_dqs_in[1]? DQSU_DH3:  1'bz;
     assign #(DQS_IN_DELAY_H) NDQSU = en_dqs_in[1]? NDQSU_DH3: 1'bz;
 
-    ddr3 #(
+    ddr3
+     /*#(
         .TCK_MIN             (2500), 
         .TJIT_PER            (100),
         .TJIT_CC             (200),
@@ -444,7 +445,8 @@ module  ddr3_wrap#(
         .DIFF_GROUP          (2'd2),
         .SIMUL_500US         (5),
         .SIMUL_200US         (2)
-    ) ddr3_i (
+    ) */        
+    ddr3_i (
         .rst_n   (SDRST_D),         // input 
         .ck      (SDCLK_D),         // input 
         .ck_n    (SDNCLK_D),        // input 

x393.v

@@ -1026,6 +1026,7 @@ assign axi_grst = axi_rst_pre;
         .CLKFBOUT_MULT_REF                 (CLKFBOUT_MULT_REF),
         .CLKFBOUT_DIV_REF                  (CLKFBOUT_DIV_REF),
         .DIVCLK_DIVIDE                     (DIVCLK_DIVIDE),
+        .CLKFBOUT_USE_FINE_PS              (CLKFBOUT_USE_FINE_PS),
         .CLKFBOUT_PHASE                    (CLKFBOUT_PHASE),
         .SDCLK_PHASE                       (SDCLK_PHASE),
         .CLK_PHASE                         (CLK_PHASE),

x393_testbench02.tf

@@ -1296,6 +1296,7 @@ assign bresp=                              x393_i.ps7_i.MAXIGP0BRESP;
         .CLKFBOUT_DIV_REF                  (CLKFBOUT_DIV_REF),
         .DIVCLK_DIVIDE                     (DIVCLK_DIVIDE),
         .CLKFBOUT_PHASE                    (CLKFBOUT_PHASE),
+        .CLKFBOUT_USE_FINE_PS              (CLKFBOUT_USE_FINE_PS),
         .SDCLK_PHASE                       (SDCLK_PHASE),
         .CLK_PHASE                         (CLK_PHASE),
         .CLK_DIV_PHASE                     (CLK_DIV_PHASE),

x393_testbench03.tf

@@ -1423,6 +1423,7 @@ assign bresp=                              x393_i.ps7_i.MAXIGP0BRESP;
         .CLKFBOUT_MULT_REF                 (CLKFBOUT_MULT_REF),
         .CLKFBOUT_DIV_REF                  (CLKFBOUT_DIV_REF),
         .DIVCLK_DIVIDE                     (DIVCLK_DIVIDE),
+        .CLKFBOUT_USE_FINE_PS              (CLKFBOUT_USE_FINE_PS),
         .CLKFBOUT_PHASE                    (CLKFBOUT_PHASE),
         .SDCLK_PHASE                       (SDCLK_PHASE),
         .CLK_PHASE                         (CLK_PHASE),