working on memory channels synchronization

51d9d5ad · Andrey Filippov · 95bcaf82 · 51d9d5ad · 51d9d5ad · 51d9d5ad
Commit 51d9d5ad authored Sep 04, 2016 by Andrey Filippov
15 changed files
--- a/cocotb/x393_cocotb_02.sav
+++ b/cocotb/x393_cocotb_02.sav
 [*]
 [*] GTKWave Analyzer v3.3.66 (w)1999-2015 BSI
-[*] Thu Sep  1 21:10:54 2016
+[*] Sun Sep  4 16:43:07 2016
 [*]
-[dumpfile] "/home/eyesis/git/x393-neon/simulation/x393_dut-20160901133543970.fst"
-[dumpfile_mtime] "Thu Sep  1 20:31:46 2016"
-[dumpfile_size] 118208746
+[dumpfile] "/home/eyesis/git/x393-neon/simulation/x393_dut-20160903141950280.fst"
+[dumpfile_mtime] "Sat Sep  3 20:58:57 2016"
+[dumpfile_size] 219266337
 [savefile] "/home/eyesis/git/x393-neon/cocotb/x393_cocotb_02.sav"
-[timestart] 115264800
+[timestart] 0
 [size] 1836 1171
 [pos] 1920 23
-*-15.820814 115547388 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
+*-25.534578 177517388 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
 [treeopen] x393_dut.
 [treeopen] x393_dut.ddr3_i.ddr3_i.
 [treeopen] x393_dut.simul_axi_master_wdata_i.
 [treeopen] x393_dut.x393_i.
 [treeopen] x393_dut.x393_i.cmd_mux_i.
+[treeopen] x393_dut.x393_i.compressor393_i.
 [treeopen] x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].
 [treeopen] x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.
+[treeopen] x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.
+[treeopen] x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.
 [treeopen] x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_pixel_buf_iface_i.
 [treeopen] x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_status_i.
 [treeopen] x393_dut.x393_i.compressor393_i.cmprs_channel_block[1].
@@ -31,6 +34,7 @@
 [treeopen] x393_dut.x393_i.compressor393_i.genblk3.cmprs_afi0_mux_i.
 [treeopen] x393_dut.x393_i.frame_sequencer_block[0].
 [treeopen] x393_dut.x393_i.frame_sequencer_block[0].cmd_frame_sequencer_i.
+[treeopen] x393_dut.x393_i.mcntrl393_i.
 [treeopen] x393_dut.x393_i.mcntrl393_i.memctrl16_i.mcontr_sequencer_i.
 [treeopen] x393_dut.x393_i.mcntrl393_i.memctrl16_i.mcontr_sequencer_i.phy_cmd_i.
 [treeopen] x393_dut.x393_i.mcntrl393_i.memctrl16_i.mcontr_sequencer_i.phy_cmd_i.phy_top_i.
@@ -38,6 +42,8 @@
 [treeopen] x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].
 [treeopen] x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.
 [treeopen] x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.
+[treeopen] x393_dut.x393_i.sensors393_i.
+[treeopen] x393_dut.x393_i.sensors393_i.sensor_channel_block[0].
 [treeopen] x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_channel_i.
 [treeopen] x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_channel_i.sens_sync_i.
 [treeopen] x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_membuf_i.
@@ -45,10 +51,10 @@
 [treeopen] x393_dut.x393_i.sensors393_i.sensor_channel_block[2].
 [treeopen] x393_dut.x393_i.sensors393_i.sensor_channel_block[3].
 [treeopen] x393_dut.x393_i.timing393_i.
-[sst_width] 266
+[sst_width] 251
 [signals_width] 293
 [sst_expanded] 1
-[sst_vpaned_height] 540
+[sst_vpaned_height] 641
 @820
 x393_dut.TEST_TITLE[639:0]
 @800200
@@ -150,7 +156,7 @@ x393_dut.dutm0_xtra_blag[3:0]
 x393_dut.dutm0_xtra_rdlag[3:0]
 @1401200
 -maxi0
-@800200
+@c00200
 -SENSOR1
 @28
 x393_dut.simul_sensor12bits_i.ARO
@@ -166,7 +172,7 @@ x393_dut.simul_sensor12bits_i.stopped
 x393_dut.simul_sensor12bits_i.DCLK
 x393_dut.simul_sensor12bits_i.MCLK
 x393_dut.PX1_MCLK
-@1000200
+@1401200
 -SENSOR1
 @c00200
 -memory_timing
@@ -406,7 +412,7 @@ x393_dut.x393_i.sensors393_i.sensor_channel_block[2].sensor_channel_i.pxd[11:0]
 #{x393_dut.x393_i.sensors393_i.sensor_channel_block[3].sensor_channel_i.pxd[11:0]} (0)x393_dut.x393_i.sensors393_i.sensor_channel_block[3].sensor_channel_i.pxd[11:0] (1)x393_dut.x393_i.sensors393_i.sensor_channel_block[3].sensor_channel_i.pxd[11:0] (2)x393_dut.x393_i.sensors393_i.sensor_channel_block[3].sensor_channel_i.pxd[11:0] (3)x393_dut.x393_i.sensors393_i.sensor_channel_block[3].sensor_channel_i.pxd[11:0] (4)x393_dut.x393_i.sensors393_i.sensor_channel_block[3].sensor_channel_i.pxd[11:0] (5)x393_dut.x393_i.sensors393_i.sensor_channel_block[3].sensor_channel_i.pxd[11:0] (6)x393_dut.x393_i.sensors393_i.sensor_channel_block[3].sensor_channel_i.pxd[11:0] (7)x393_dut.x393_i.sensors393_i.sensor_channel_block[3].sensor_channel_i.pxd[11:0] (8)x393_dut.x393_i.sensors393_i.sensor_channel_block[3].sensor_channel_i.pxd[11:0] (9)x393_dut.x393_i.sensors393_i.sensor_channel_block[3].sensor_channel_i.pxd[11:0] (10)x393_dut.x393_i.sensors393_i.sensor_channel_block[3].sensor_channel_i.pxd[11:0] (11)x393_dut.x393_i.sensors393_i.sensor_channel_block[3].sensor_channel_i.pxd[11:0]
 @1001200
 -group_end
-@800200
+@c00200
 -scanline0
 @28
 x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.frame_start
@@ -415,9 +421,9 @@ x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.frame_s
 @22
 x393_dut.x393_i.sens_frame_run[3:0]
 x393_dut.x393_i.cmprs_frame_start_dst[3:0]
-@1000200
+@1401200
 -scanline0
-@800200
+@c00200
 -memory
 @28
 x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_membuf_i.mclk
@@ -429,7 +435,7 @@ x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.cmd_we
 @22
 x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.cmd_a[3:0]
 x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.cmd_data[31:0]
-@1000200
+@1401200
 -memory
 @c00200
 -debug_mmcm_clk
@@ -451,6 +457,38 @@ x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_channel_i.sens_paral
 x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_channel_i.sens_parallel12_i.trigger_mode
 @1401200
 -debug_mmcm_clk
+@28
+x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_channel_i.sens_sync_i.pre_sof_out
+x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_channel_i.sens_sync_i.pre_sof_late
+x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_channel_i.sens_sync_i.sof_late
+x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_channel_i.sens_sync_i.sof_dly
+x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_channel_i.sens_sync_i.eof_in
+x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_channel_i.sens_sync_i.hact_single
+x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_channel_i.sens_sync_i.last_line
+x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_channel_i.gamma_bayer[1:0]
+@800200
+-compressor0
+@800022
+x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.bayer_phase[1:0]
+@28
+(0)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.bayer_phase[1:0]
+(1)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.bayer_phase[1:0]
+@1001200
+-group_end
+@28
+x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_cmd_decode_i.frame_start_xclk
+@22
+x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_cmd_decode_i.bayer_shift_xclk[1:0]
+@28
+x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_cmd_decode_i.ctrl_we_xclk
+@22
+x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_cmd_decode_i.bayer_shift_mclk[1:0]
+x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_cmd_decode_i.ctrl_we_r
+@1000200
+-compressor0
+@200
+-
+@1401200
 -sensor_channel0
 @c00200
 -par12_hispi_psp4l1
@@ -491,17 +529,45 @@ x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_membuf_i.waddr[8:0]
 x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_membuf_i.wpage[1:0]
 @1401200
 -all_par_hispi
-@c00200
+@800200
 -compressor_0
+@22
+x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.frame_number_src[15:0]
+x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.frame_number_dst[15:0]
 @28
 x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.mclk
 x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.frame_start_dst
+x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.cmprs_en
 x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.cmprs_run
+x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_cmd_decode_i.cmprs_run_mclk
+x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_cmd_decode_i.ctrl_we_r
+@22
+x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_cmd_decode_i.di_r[30:0]
+@28
 x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.cmprs_standalone
+x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.reading_frame
+x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.reading_frame_r
+x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.frame_started
+x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.frame_started_mclk
+x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.first_mb
+x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.mb_pre_start
+x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.buf_ready_w
+@c00022
+x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.buf_diff[2:0]
+@28
+(0)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.buf_diff[2:0]
+(1)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.buf_diff[2:0]
+(2)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.buf_diff[2:0]
+@1401200
+-group_end
+@22
+x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.needed_page[2:0]
+x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.next_valid[2:0]
+@28
+x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.reset_page_rd
+x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.frame_done_dst
 x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.vsync_late
 x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.reading_frame_r
-@200
-
 @c00022
 x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.frame_start_r[4:0]
 @28
@@ -529,7 +595,11 @@ x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.frame_number
 x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.line_unfinished_src[15:0]
 x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.frame_number_dst[15:0]
 x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.line_unfinished_dst[15:0]
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.curr_y[15:0]
 @28
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.xfer_grant
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.xfer_need
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.xfer_want
 x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.suspend
 x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.frame_done_dst
 x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.frame_start_xclk
@@ -539,16 +609,8 @@ x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macrob
 x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.frame_pre_start_r
 x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.starting
 x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.last_mb
-@200
-
 @22
 x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_membuf_i.wpage[1:0]
-@28
-x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.xfer_need
-x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.xfer_want
-x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.xfer_grant
-@22
-x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.curr_y[15:0]
 @200
 -SAXI
 @28
@@ -570,8 +632,80 @@ x393_dut.simul_axi_hp1_wr_i.sim_wr_address[31:0]
 x393_dut.simul_axi_hp1_wr_i.sim_wr_data[63:0]
 @28
 x393_dut.simul_axi_hp1_wr_i.sim_wr_valid
-@1401200
+@1000200
 -compressor_0
+@800200
+-follow_master
+-scanline_linear
+@28
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.xfer_page_rst_wr
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.buf_reset_pend
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.frame_start
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.frame_start_late
+(1)x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.frame_start_r[4:0]
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.frame_start_delayed
+@22
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.frame_number_cntr[15:0]
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.frame_number[15:0]
+@200
+-
+@1000200
+-scanline_linear
+@800200
+-mcntrl_tiled
+@28
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.xfer_page_rst_rd
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.buf_reset_pend
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.frame_master_pend
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.frame_start
+@22
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.frame_start_r[4:0]
+@28
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.rst_frame_num_w
+@c00028
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.rst_frame_num_r[1:0]
+@28
+(0)x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.rst_frame_num_r[1:0]
+(1)x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.rst_frame_num_r[1:0]
+@22
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.frame_number_cntr[15:0]
+@1401200
+-group_end
+@22
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.frame_number_cntr[15:0]
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.frame_number[15:0]
+@28
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.cmd_we
+@22
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.master_frame[15:0]
+@28
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.master_set
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.frame_en
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.frame_finished
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.xfer_page_rst_r
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.chn_rst
+@c00022
+x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.mode_reg[11:0]
+@28
+(0)x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.mode_reg[11:0]
+(1)x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.mode_reg[11:0]
+(2)x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.mode_reg[11:0]
+(3)x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.mode_reg[11:0]
+(4)x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.mode_reg[11:0]
+(5)x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.mode_reg[11:0]
+(6)x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.mode_reg[11:0]
+(7)x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.mode_reg[11:0]
+(8)x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.mode_reg[11:0]
+(9)x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.mode_reg[11:0]
+(10)x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.mode_reg[11:0]
+(11)x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.mode_reg[11:0]
+@1401200
+-group_end
+@200
+-
+@1000200
+-mcntrl_tiled
+-follow_master
 @c00200
 -compressors_all
 @28
@@ -824,10 +958,12 @@ x393_dut.x393_i.compressor393_i.cmprs_channel_block[2].jp_channel_i.buf_pxd[7:0]
 x393_dut.x393_i.compressor393_i.cmprs_channel_block[3].jp_channel_i.buf_pxd[7:0]
 @1401200
 -compressors_all
-@800200
+@c00200
 -cmdseq_0
 @28
 x393_dut.x393_i.frame_sequencer_block[0].cmd_frame_sequencer_i.frame_sync
+@800200
+-command_write
 @c00022
 x393_dut.x393_i.frame_sequencer_block[0].cmd_frame_sequencer_i.cmdseq_di[63:0]
 @28
@@ -988,8 +1124,10 @@ x393_dut.x393_i.frame_sequencer_block[0].cmd_frame_sequencer_i.wpage_inc[1:0]
 x393_dut.x393_i.frame_sequencer_block[0].cmd_frame_sequencer_i.cmd_we_ctl_w
 @1001200
 -group_end
-@200
-
+@1000200
+-command_write
+@800200
+-command_read
 @28
 x393_dut.x393_i.frame_sequencer_block[0].cmd_frame_sequencer_i.seq_enrun
 @22
@@ -1019,16 +1157,16 @@ x393_dut.x393_i.frame_sequencer_block[0].cmd_frame_sequencer_i.read_busy[1:0]
 @28
 (0)x393_dut.x393_i.frame_sequencer_block[0].cmd_frame_sequencer_i.read_busy[1:0]
 (1)x393_dut.x393_i.frame_sequencer_block[0].cmd_frame_sequencer_i.read_busy[1:0]
-x393_dut.x393_i.frame_sequencer_block[0].cmd_frame_sequencer_i.conf_send
 x393_dut.x393_i.frame_sequencer_block[0].cmd_frame_sequencer_i.valid
 x393_dut.x393_i.frame_sequencer_block[0].cmd_frame_sequencer_i.ackn
-@29
 x393_dut.x393_i.frame_sequencer_block[0].cmd_frame_sequencer_i.mclk
 @1001200
 -group_end
 @1000200
+-command_read
+@1401200
 -cmdseq_0
-@800200
+@c00200
 -cmdseq_mux
 @22
 x393_dut.x393_i.cmd_seq_mux_i.frame_num0[3:0]
@@ -1076,9 +1214,9 @@ x393_dut.x393_i.cmd_seq_mux_i.pri_enc_w[1:0]
 x393_dut.x393_i.cmd_seq_mux_i.pri_one[3:0]
 @28
 x393_dut.x393_i.cmd_seq_mux_i.chn_r[1:0]
-@1000200
+@1401200
 -cmdseq_mux
-@800200
+@c00200
 -cmd_mux
 @22
 x393_dut.x393_i.cmd_mux_i.pre_waddr[13:0]
@@ -1125,7 +1263,7 @@ x393_dut.x393_i.cmd_mux_i.seq_busy_r[4:0]
 @28
 x393_dut.x393_i.cmd_mux_i.start_axi_w
 x393_dut.x393_i.cmd_mux_i.start_wburst
-@1000200
+@1401200
 -cmd_mux
 @800200
 -readback
@@ -1136,7 +1274,7 @@ x393_dut.x393_i.cmd_readback_i.waddr[10:0]
 x393_dut.x393_i.cmd_readback_i.wdata[31:0]
 @1000200
 -readback
-@800200
+@c00200
 -gpio
 @28
 x393_dut.x393_i.gpio393_i.set_mode_w
@@ -1232,7 +1370,7 @@ x393_dut.x393_i.gpio393_i.io_pins[9:0]
 (9)x393_dut.x393_i.gpio393_i.io_pins[9:0]
 @1001200
 -group_end
-@1000200
+@1401200
 -gpio
 @c00200
 -sensor_channel1

--- a/compressor_jp/jp_channel.v
+++ b/compressor_jp/jp_channel.v
@@ -166,6 +166,8 @@ module  jp_channel#(
    input                         frame_done_dst,     // single-cycle pulse when the full frame (window) was transferred to/from DDR3 memory
                                                      // use as 'eot_real' in 353 
    output                        suspend,            // suspend reading data for this channel - waiting for the source data
+//    output                        master_follow,      // compressor is following sensor, copy sesnor frame number instead of reset. 
+    
    output reg [LAST_FRAME_BITS-1:0] frame_number_finished,   // valid after stuffer done
    

@@ -788,7 +790,7 @@ module  jp_channel#(
        .sigle_frame_buf    (sigle_frame_buf),     // input - memory controller uses a single frame buffer (frame_number_* == 0), use other sync
        .vsync_late         (vsync_late),          // input - @mclk delayed start of frame, @xclk. In 353 it was 16 lines after VACT active
                                                   // source channel should already start, some delay give time for sequencer commands
-                                                   // that should arrive before it
+                                                   // that should arrive before it, in NC393 it is programmable
        .frame_started      (first_mb && mb_pre_start), // @xclk started first macroblock (checking for broken frames)
        .frame_start_dst    (frame_start_dst),     // output reg @mclk - trigger receive (tiled) memory channel (it will take care of
                                                   // single/repetitive modes itself this output either follows vsync_late (reclocks it)

--- a/fpga_version.vh
+++ b/fpga_version.vh
@@ -35,7 +35,8 @@
 * contains all the components and scripts required to completely simulate it
 * with at least one of the Free Software programs.
 */
-          parameter FPGA_VERSION =          32'h039300a8;      // parallel, fixing BUG in command sequencer that was missing some commands 79.25%, all met
+          parameter FPGA_VERSION =          32'h039300a9;      // parallel, added copying maste-t-slave frame number -0.169(8 paths), 80.28%
+//        parameter FPGA_VERSION =          32'h039300a8;      // parallel, fixing BUG in command sequencer that was missing some commands 79.25%, all met
 //        parameter FPGA_VERSION =          32'h039300a7;      // parallel, changing parameter to reset buffer pages at each frame start. 79.4%, -0.022 (2 paths)
 //        parameter FPGA_VERSION =          32'h039300a6;      // parallel, adding frame sync delays to mcntrl_linear 79.26, mclk and xclk violated
 //        parameter FPGA_VERSION =          32'h039300a5;      // parallel, fixing command sequencer and ARO 80.21%, -0.068

--- a/includes/x393_parameters.vh
+++ b/includes/x393_parameters.vh
@@ -297,6 +297,8 @@
    parameter MCONTR_LINTILE_REPEAT =             10,  // read/write pages until disabled
    parameter MCONTR_LINTILE_DIS_NEED =           11,   // disable 'need' request
    parameter MCONTR_LINTILE_SKIP_LATE =          12,  // skip actual R/W operation when it is too late, advance pointers
+    parameter MCONTR_LINTILE_COPY_FRAME =         13,  // copy frame number from the master channel (single event, not a persistent mode)
+    
    parameter MCNTRL_SCANLINE_DLY_WIDTH =          7,  // delay start pulse by 1..64 mclk
    parameter MCNTRL_SCANLINE_DLY_DEFAULT =       63,  // initial delay value for start pulse


--- a/memctrl/mcntrl393.v
+++ b/memctrl/mcntrl393.v
@@ -261,6 +261,7 @@ module  mcntrl393 #(
    parameter MCONTR_LINTILE_REPEAT =       10,  // read/write pages until disabled 
    parameter MCONTR_LINTILE_DIS_NEED =     11,   // disable 'need' request 
    parameter MCONTR_LINTILE_SKIP_LATE =    12,  // skip actual R/W operation when it is too late, advance pointers
+    parameter MCONTR_LINTILE_COPY_FRAME =   13,  // copy frame number from the master channel (single event, not a persistent mode)
    parameter MCNTRL_SCANLINE_DLY_WIDTH =    7,  // delay start pulse by 1..64 mclk
    parameter MCNTRL_SCANLINE_DLY_DEFAULT = 63  // initial delay value for start pulse
    
@@ -352,7 +353,7 @@ module  mcntrl393 #(
    output                     [3:0] cmprs_frame_done_dst,     // single-cycle pulse when the full frame (window) was transferred to/from DDR3 memory
                                                               // use as 'eot_real' in 353 
    input                      [3:0] cmprs_suspend,            // suspend reading data for this channel - waiting for the source data
-
+//    input                      [3:0] master_follow,            // compressor memory frame should follow that of the sensor channel, instead of reset
 // TODO: move line_unfinished and suspend to internals of this module (and control comparator modes)
    // Channel 1 - AFI read/write to system memory with scanline linear mode
    input                          frame_start_chn1,   // resets page, x,y, and initiates transfer requests (in write mode will wait for next_page)
@@ -564,6 +565,7 @@ module  mcntrl393 #(
    wire                  [3:0] status_cmprs_start;

 // Sensor and compressor signals
+    wire                   [3:0] sens_frame_set; // sensor memory controller has just set frame number (slave can use to sync)
    wire                   [3:0] sens_want;
    wire                   [3:0] sens_need;
    wire                   [3:0] cmprs_want;
@@ -1129,7 +1131,8 @@ module  mcntrl393 #(
                .frame_finished       (), // output
                .line_unfinished  (cmprs_line_unfinished_src[i * FRAME_HEIGHT_BITS +: FRAME_HEIGHT_BITS]), // output[15:0] 
                .suspend          (1'b0), // input
-                .frame_number     (cmprs_frame_number_src[i * LAST_FRAME_BITS +: LAST_FRAME_BITS]),
+                .frame_number     (cmprs_frame_number_src[i * LAST_FRAME_BITS +: LAST_FRAME_BITS]), //output[15:0]
+                .frame_set        (sens_frame_set[i]),          // output
                .xfer_want        (sens_want[i]),               // output
                .xfer_need        (sens_need[i]),               // output
                .xfer_grant       (sens_channel_pgm_en[i]),     // input
@@ -1185,7 +1188,8 @@ module  mcntrl393 #(
                .MCONTR_LINTILE_RST_FRAME      (MCONTR_LINTILE_RST_FRAME),
                .MCONTR_LINTILE_SINGLE         (MCONTR_LINTILE_SINGLE),
                .MCONTR_LINTILE_REPEAT         (MCONTR_LINTILE_REPEAT),
-                .MCONTR_LINTILE_DIS_NEED       (MCONTR_LINTILE_DIS_NEED)
+                .MCONTR_LINTILE_DIS_NEED       (MCONTR_LINTILE_DIS_NEED),
+                .MCONTR_LINTILE_COPY_FRAME     (MCONTR_LINTILE_COPY_FRAME)
            ) mcntrl_tiled_rd_compressor_i ( 
                .mrst                 (mrst),                         // input
                .mclk                 (mclk),                        // input
@@ -1200,7 +1204,10 @@ module  mcntrl393 #(
                .frame_finished       (),                            // output
                .line_unfinished      (cmprs_line_unfinished_dst[i * FRAME_HEIGHT_BITS +: FRAME_HEIGHT_BITS]), // output[15:0] 
                .suspend              (cmprs_suspend[i]),            // input
-                .frame_number         (cmprs_frame_number_dst[i * LAST_FRAME_BITS +: LAST_FRAME_BITS]),
+                .frame_number         (cmprs_frame_number_dst[i * LAST_FRAME_BITS +: LAST_FRAME_BITS]), // output[15:0]
+                .master_frame         (cmprs_frame_number_src[i * LAST_FRAME_BITS +: LAST_FRAME_BITS]), // input[15:0] 
+                .master_set           (sens_frame_set[i]),           // input
+//                .master_follow        (master_follow[i]),            // input
                .xfer_want            (cmprs_want[i]),               // output
                .xfer_need            (cmprs_need[i]),               // output
                .xfer_grant           (cmprs_channel_pgm_en[i]),     // input
@@ -1279,6 +1286,7 @@ module  mcntrl393 #(
        .line_unfinished  (line_unfinished_chn1), // output[15:0] 
        .suspend          (suspend_chn1), // input
        .frame_number     (), // output[15:0] - not used for this channel
+        .frame_set        (),          // output
        .xfer_want        (want_rq1), // output
        .xfer_need        (need_rq1), // output
        .xfer_grant       (channel_pgm_en1), // input
@@ -1352,6 +1360,7 @@ module  mcntrl393 #(
        .line_unfinished  (line_unfinished_chn3), // output[15:0] 
        .suspend          (suspend_chn3), // input
        .frame_number     (frame_number_chn3),
+        .frame_set        (),          // output
        .xfer_want        (want_rq3), // output
        .xfer_need        (need_rq3), // output
        .xfer_grant       (channel_pgm_en3), // input
@@ -1422,6 +1431,9 @@ module  mcntrl393 #(
        .line_unfinished      (line_unfinished_chn2),       // output[15:0] 
        .suspend              (suspend_chn2),               // input
        .frame_number         (frame_number_chn2),
+        .master_frame         (16'b0),                      // input[15:0] 
+        .master_set           (1'b0),                       // input
+//        .master_follow        (1'b0),                       // input
        .xfer_want            (want_rq2),                   // output
        .xfer_need            (need_rq2),                   // output
        .xfer_grant           (channel_pgm_en2),            // input
@@ -1490,6 +1502,9 @@ module  mcntrl393 #(
        .line_unfinished      (line_unfinished_chn4),       // output[15:0] 
        .suspend              (suspend_chn4),               // input
        .frame_number         (frame_number_chn4),          // output  [15:0]
+        .master_frame         (16'b0),                      // input[15:0] 
+        .master_set           (1'b0),                       // input
+//        .master_follow        (1'b0),                       // input
        .xfer_want            (want_rq4),                   // output
        .xfer_need            (need_rq4),                   // output
        .xfer_grant           (channel_pgm_en4),            // input

--- a/memctrl/mcntrl_linear_rw.v
+++ b/memctrl/mcntrl_linear_rw.v
@@ -106,6 +106,7 @@ module  mcntrl_linear_rw #(
    output [FRAME_HEIGHT_BITS-1:0] line_unfinished, // number of the current (unfinished ) line, RELATIVE TO FRAME, NOT WINDOW?. 
    input                          suspend,       // suspend transfers (from external line number comparator)
    output   [LAST_FRAME_BITS-1:0] frame_number,  // current frame number (for multi-frame ranges)
+    output                         frame_set,     // frame number is just set to a new value (can be used by slave to sync)
    output                         xfer_want,     // "want" data transfer
    output                         xfer_need,     // "need" - really need a transfer (only 1 page/ room for 1 page left in a buffer), want should still be set.
    input                          xfer_grant,    // sequencer programming access granted, deassert wait/need 
@@ -258,6 +259,8 @@ module  mcntrl_linear_rw #(
    reg [MCNTRL_SCANLINE_DLY_WIDTH-1:0] start_delay; // how much to delay frame start
    wire                          frame_start_late;
    wire                          set_start_delay_w; 
+    reg                           buf_reset_pend;  // reset buffer page at next (late)frame sync (compressor should be disabled
+                                                   // if total  number of pages in a frame is not multiple of 4 
    
    
    assign frame_number =       frame_number_current;
@@ -277,7 +280,7 @@ module  mcntrl_linear_rw #(
    assign rst_frame_num_w = cmd_we && (cmd_a== MCNTRL_SCANLINE_MODE) && cmd_data[MCONTR_LINTILE_RST_FRAME];
    
    assign frame_run = busy_r;
-    
+    assign frame_set = frame_start_r[3];
    // Set parameter registers
    always @(posedge mclk) begin
        if      (mrst)               mode_reg <= 0;
@@ -316,6 +319,10 @@ module  mcntrl_linear_rw #(
        else if (single_frame_r || repeat_frames) frame_en <= 1;
        else if (frame_start_late)                frame_en <= 0;
        
+        // will reset buffer page at next frame start
+        if      (mrst ||frame_start_r[0])         buf_reset_pend <= 0;
+        else if (rst_frame_num_r)                 buf_reset_pend <= 1;
+        
        if      (mrst)               frame_number_cntr <= 0;
        else if (rst_frame_num_r[0]) frame_number_cntr <= 0;
        else if (frame_start_r[2])   frame_number_cntr <= is_last_frame?{LAST_FRAME_BITS{1'b0}}:(frame_number_cntr+1);
@@ -578,10 +585,10 @@ wire    start_not_partial= xfer_start_r[0] && !xfer_limited_by_mem_page_r;
        else if (!start_not_partial &&  next_page) page_cntr <= page_cntr + 1;
        
        if (mrst) xfer_page_rst_r <= 1;
-        else      xfer_page_rst_r <= chn_rst || (MCNTRL_SCANLINE_FRAME_PAGE_RESET ? (frame_start_r[0] & cmd_wrmem):1'b0);
+        else      xfer_page_rst_r <= chn_rst || (buf_reset_pend && (MCNTRL_SCANLINE_FRAME_PAGE_RESET ? (frame_start_r[0] & cmd_wrmem):1'b0));

        if (mrst) xfer_page_rst_pos <= 1;
-        else      xfer_page_rst_pos <= chn_rst || (MCNTRL_SCANLINE_FRAME_PAGE_RESET ? (frame_start_r[0] & ~cmd_wrmem):1'b0);
+        else      xfer_page_rst_pos <= chn_rst || (buf_reset_pend && (MCNTRL_SCANLINE_FRAME_PAGE_RESET ? (frame_start_r[0] & ~cmd_wrmem):1'b0));

        
 // increment x,y (two cycles)

--- a/memctrl/mcntrl_tiled_rw.v
+++ b/memctrl/mcntrl_tiled_rw.v
@@ -82,8 +82,8 @@ module  mcntrl_tiled_rw#(
    parameter MCONTR_LINTILE_RST_FRAME =     8, // reset frame number 
    parameter MCONTR_LINTILE_SINGLE =        9, // read/write a single page 
    parameter MCONTR_LINTILE_REPEAT =       10, // read/write pages until disabled
-    parameter MCONTR_LINTILE_DIS_NEED =     11   // disable 'need' request 
-     
+    parameter MCONTR_LINTILE_DIS_NEED =     11, // disable 'need' request
+    parameter MCONTR_LINTILE_COPY_FRAME =   13  // copy frame number from the master channel (single event, not a persistent mode)
 )(
    input                          mrst,
    input                          mclk,
@@ -105,6 +105,9 @@ module  mcntrl_tiled_rw#(
    output [FRAME_HEIGHT_BITS-1:0] line_unfinished, // number of the current (unfinished ) line, RELATIVE TO FRAME, NOT WINDOW. 
    input                          suspend,       // suspend transfers (from external line number comparator)
    output   [LAST_FRAME_BITS-1:0] frame_number,  // current frame number (for multi-frame ranges)
+    input    [LAST_FRAME_BITS-1:0] master_frame,  // current frame number of a master channel
+    input                          master_set,    // master frame number set (1-st cycle when new value is valid)
+//    input                          master_follow, // copy master frame number instead of reset @master_set, 0 - ignore master_set 
    output                         xfer_want,     // "want" data transfer
    output                         xfer_need,     // "need" - really need a transfer (only 1 page/ room for 1 page left in a buffer), want should still be set.
    input                          xfer_grant,    // sequencer programming access granted, deassert wait/need 
@@ -185,6 +188,7 @@ module  mcntrl_tiled_rw#(
    wire                          repeat_frames; // mode bit
    wire                          single_frame_w; // pulse
    wire                          rst_frame_num_w;
+    wire                          set_copy_frame_num_w;
    reg                           single_frame_r;  // pulse
    reg                     [1:0] rst_frame_num_r; // reset frame number/next start address
    reg                           frame_en;       // enable next frame
@@ -264,6 +268,10 @@ module  mcntrl_tiled_rw#(
    reg    [FRAME_WIDTH_BITS-1:0] start_x;        // (programmed) normally 0, copied to curr_x on frame_start  
    reg   [FRAME_HEIGHT_BITS-1:0] start_y;        // (programmed) normally 0, copied to curr_y on frame_start 
    reg                           xfer_page_done_d;   // next cycle after xfer_page_done
+    reg                           frame_master_pend;  // set frame counter from the master frame number at  next master_set
+    reg                           set_frame_from_master; // single-clock copy frame counter from the master channel
+    reg                           buf_reset_pend;  // reset buffer page at next (late)frame sync (compressor should be disabled
+                                                   // if total  number of pages in a frame is not multiple of 4 
    
    assign frame_number =       frame_number_current;
    
@@ -280,7 +288,7 @@ module  mcntrl_tiled_rw#(
    
    assign single_frame_w =       cmd_we && (cmd_a== MCNTRL_TILED_MODE) && cmd_data[MCONTR_LINTILE_SINGLE];
    assign rst_frame_num_w =      cmd_we && (cmd_a== MCNTRL_TILED_MODE) && cmd_data[MCONTR_LINTILE_RST_FRAME];
-
+    assign set_copy_frame_num_w = cmd_we && (cmd_a== MCNTRL_TILED_MODE) && cmd_data[MCONTR_LINTILE_COPY_FRAME];
    
    //
    // Set parameter registers
@@ -321,8 +329,18 @@ module  mcntrl_tiled_rw#(
        else if (single_frame_r || repeat_frames) frame_en <= 1;
        else if (frame_start)                     frame_en <= 0;
        
+        if      (mrst ||master_set)     frame_master_pend <= 0;
+        else if (set_copy_frame_num_w)  frame_master_pend <= 1;
+        
+        // will reset buffer page at next frame start
+        if      (mrst ||frame_start_r[0])   buf_reset_pend <= 0;
+        else if (rst_frame_num_r)           buf_reset_pend <= 1;
+        
+        set_frame_from_master <= master_set && frame_master_pend;
+        
        if      (mrst)                  frame_number_cntr <= 0;
        else if (rst_frame_num_r[0])    frame_number_cntr <= 0;
+        else if (set_frame_from_master) frame_number_cntr <= master_frame;
        else if (frame_start_r[2])      frame_number_cntr <= is_last_frame?{LAST_FRAME_BITS{1'b0}}:(frame_number_cntr+1);
        
        if      (mrst)               frame_number_current <= 0;
@@ -526,10 +544,10 @@ wire    start_not_partial= xfer_start_r[0] && !xfer_limited_by_mem_page_r;
        else if (!start_not_partial &&  next_page) page_cntr <= page_cntr + 1;
        
        if (mrst) xfer_page_rst_r <= 1;
-        else     xfer_page_rst_r <= chn_rst || (MCNTRL_TILED_FRAME_PAGE_RESET ? (frame_start_r[0] & cmd_wrmem):1'b0);
+        else      xfer_page_rst_r <= chn_rst || (buf_reset_pend && (MCNTRL_TILED_FRAME_PAGE_RESET ? (frame_start_r[0] & cmd_wrmem):1'b0));

        if (mrst) xfer_page_rst_pos <= 1;
-        else     xfer_page_rst_pos <= chn_rst || (MCNTRL_TILED_FRAME_PAGE_RESET ? (frame_start_r[0] & ~cmd_wrmem):1'b0);
+        else     xfer_page_rst_pos <= chn_rst || (buf_reset_pend && (MCNTRL_TILED_FRAME_PAGE_RESET ? (frame_start_r[0] & ~cmd_wrmem):1'b0));
        
 // increment x,y (two cycles)
        if (mrst)                                 curr_x <= 0;

--- a/py393/hargs
+++ b/py393/hargs
@@ -7,4 +7,4 @@
 -c setupSensorsPower  "PAR12"  all  0  0.0
 -c measure_all "*DI"
 -c setSensorClock 24.0 "2V5_LVDS"
-c set_rtc # maybe not needed as it can be set differently
+-c set_rtc
--- a/py393/vrlg.py
+++ b/py393/vrlg.py
@@ -325,7 +325,7 @@ CMPRS_CBIT_CMODE_JP4DIFF__RAW = str
 CMPRS_AFIMUX_MASK__TYPE = str
 MCONTR_SENS_INC = int
 CAMSYNC_TRIG_PERIOD__TYPE = str
-CMPRS_STATUS_REG_BASE__RAW = str
+SENSIO_STATUS = int
 DFLT_DQS_PATTERN = int
 SENS_GAMMA_ADDR_DATA__RAW = str
 DLY_LANE1_IDELAY__RAW = str
@@ -386,7 +386,6 @@ CMD_PAUSE_BITS__RAW = str
 SENSI2C_TBL_DLY_BITS = int
 IDELAY_VALUE__RAW = str
 MULTICLK_PHASE_SYNC__TYPE = str
-MCONTR_CMPRS_STATUS_BASE = int
 BUFFER_DEPTH32 = int
 SENS_CTRL_QUADRANTS__TYPE = str
 SENS_LENS_BY_MASK__RAW = str
@@ -428,6 +427,7 @@ MULTICLK_BUF_DLYREF__RAW = str
 FCLK0_PERIOD = float
 CMDFRAMESEQ_REL__TYPE = str
 HISPI_DELAY_CLK0 = str
+MCNTRL_SCANLINE_DLY_WIDTH = int
 MAX_TILE_WIDTH__RAW = str
 PICKLE = str
 AFI_SIZE64__TYPE = str
@@ -517,6 +517,7 @@ MCNTRL_TILED_FRAME_FULL_WIDTH = int
 CMDFRAMESEQ_DEPTH = int
 SENS_LENS_POST_SCALE__TYPE = str
 RTC_MHZ__RAW = str
+MCONTR_LINTILE_COPY_FRAME = int
 SENSOR_PRIORITY__RAW = str
 HIST_SAXI_ADDR_MASK__TYPE = str
 SENS_CTRL_LD_DLY = int
@@ -530,9 +531,11 @@ CMPRS_TABLES__TYPE = str
 MCNTRL_PS_STATUS_CNTRL__TYPE = str
 MCONTR_PHY_16BIT_ADDR = int
 REF_JITTER1__TYPE = str
+MCNTRL_TEST01_MASK = int
 FFCLK1_DIFF_TERM = str
 MULTICLK_PHASE_AXIHP__TYPE = str
 FFCLK0_IOSTANDARD__TYPE = str
+MCNTRL_SCANLINE_DLY_DEFAULT__TYPE = str
 WOI_WIDTH__RAW = str
 STATUS_MSB_RSHFT = int
 CMPRS_CONTROL_REG__RAW = str
@@ -546,7 +549,7 @@ MCONTR_BUF4_RD_ADDR__TYPE = str
 NUM_CYCLES_16__RAW = str
 LD_DLY_LANE0_ODELAY__TYPE = str
 MCONTR_TOP_16BIT_ADDR__RAW = str
-SENSIO_STATUS = int
+MCNTRL_SCANLINE_DLY_WIDTH__RAW = str
 HIST_SAXI_MODE_ADDR_REL = int
 MCONTR_PHY_0BIT_SDRST_ACT__TYPE = str
 BUFFER_DEPTH32__TYPE = str
@@ -608,9 +611,10 @@ MCNTRL_TILED_MODE = int
 MCNTRL_TILED_WINDOW_STARTXY__TYPE = str
 CMPRS_COLOR20__TYPE = str
 MCNTRL_TEST01_CHN2_STATUS_CNTRL__RAW = str
+MCNTRL_SCANLINE_START_DELAY__TYPE = str
 LOGGER_CONF_SYN = int
 MCNTRL_TILED_CHN4_ADDR__RAW = str
-CLK_DIV_PHASE__RAW = str
+MCONTR_CMPRS_STATUS_BASE = int
 MCONTR_PHY_16BIT_PATTERNS__TYPE = str
 MCONTR_PHY_0BIT_CKE_EN__RAW = str
 NUM_CYCLES_26__TYPE = str
@@ -653,6 +657,7 @@ HISTOGRAM_TOP__TYPE = str
 SENS_GAMMA_MODE_EN__RAW = str
 SENSI2C_TBL_SA_BITS__TYPE = str
 DEBUG_ADDR = int
+MCNTRL_SCANLINE_START_DELAY__RAW = str
 SIMULATE_CMPRS_CMODE2__TYPE = str
 MULT_SAXI_ADV_WR__RAW = str
 LOGGER_PAGE_GPS = int
@@ -704,7 +709,7 @@ SENS_GAMMA_HEIGHT2 = int
 DLY_LD_MASK__TYPE = str
 STATUS_MSB_RSHFT__TYPE = str
 MCONTR_BUF0_RD_ADDR = int
-MCONTR_LINTILE_RST_FRAME__RAW = str
+HIST_SAXI_ADDR_REL__TYPE = str
 CMPRS_CBIT_CMODE_JPEG20 = int
 CMPRS_TIMEOUT_BITS = int
 CAMSYNC_PRE_MAGIC = int
@@ -1066,6 +1071,7 @@ SENSI2C_STATUS_REG_INC__RAW = str
 SDCLK_PHASE = float
 SLEW_CMDA = str
 SENSOR_IMAGE_TYPE0__RAW = str
+CMPRS_STATUS_REG_BASE__RAW = str
 MCNTRL_SCANLINE_MODE__TYPE = str
 GPIO_N__RAW = str
 TEST01_NEXT_PAGE__TYPE = str
@@ -1510,12 +1516,14 @@ MEMCLK_IBUF_LOW_PWR__RAW = str
 SENS_LENS_FAT0_OUT_MASK__RAW = str
 SENSI2C_CMD_FIFO_RD__RAW = str
 RTC_ADDR__TYPE = str
+MCONTR_LINTILE_COPY_FRAME__RAW = str
 SENSI2C_ABS_RADDR = int
 PXD_IOSTANDARD__RAW = str
 CMPRS_CBIT_FRAMES = int
 SENS_GAMMA_HEIGHT01__RAW = str
 CONTROL_RBACK_DEPTH__TYPE = str
 CMPRS_CBIT_CMODE_MONO1__RAW = str
+MCNTRL_SCANLINE_DLY_DEFAULT__RAW = str
 GPIO_PORTEN__TYPE = str
 CMDSEQMUX_ADDR__RAW = str
 DLY_DM_ODELAY__TYPE = str
@@ -1556,6 +1564,7 @@ CLK_ADDR__RAW = str
 SENSIO_CTRL__RAW = str
 HISTOGRAM_WIDTH__TYPE = str
 MCNTRL_TILED_TILE_WHS = int
+MCONTR_LINTILE_COPY_FRAME__TYPE = str
 NUM_CYCLES_03__RAW = str
 MULT_SAXI_HALF_BRAM = int
 DLY_LANE1_DQS_WLV_IDELAY = long
@@ -1682,9 +1691,9 @@ MCONTR_CMD_WR_ADDR__TYPE = str
 SENSI2C_CMD_SOFT_SCL__TYPE = str
 CLKFBOUT_MULT_SENSOR__RAW = str
 CMPRS_CSAT_CR_BITS = int
-HIST_SAXI_ADDR_REL__TYPE = str
+MCONTR_LINTILE_RST_FRAME__RAW = str
 LOGGER_CONFIG__TYPE = str
-MCNTRL_TEST01_MASK = int
+MCNTRL_SCANLINE_DLY_DEFAULT = int
 TEST01_NEXT_PAGE__RAW = str
 HIST_SAXI_MODE_ADDR_MASK__RAW = str
 FFCLK1_IBUF_LOW_PWR__TYPE = str
@@ -1774,6 +1783,7 @@ IPCLK_PHASE = float
 SENSI2C_CTRL_RADDR = int
 HIST_SAXI_MODE_ADDR_REL__RAW = str
 AXI_WRDATA_LATENCY = int
+MCNTRL_SCANLINE_START_DELAY = int
 SENS_CTRL_QUADRANTS_EN = int
 MCNTRL_SCANLINE_WINDOW_WH__RAW = str
 MULTICLK_PHASE_FB__TYPE = str
@@ -1935,6 +1945,7 @@ WOI_HEIGHT__RAW = str
 SENS_LENS_COEFF = int
 MULTICLK_PHASE_XCLK__RAW = str
 LOGGER_BIT_DURATION__RAW = str
+MCNTRL_SCANLINE_DLY_WIDTH__TYPE = str
 MCONTR_WR_MASK__TYPE = str
 SENS_LENS_C__RAW = str
 CMDFRAMESEQ_ADDR_BASE__TYPE = str
@@ -2135,6 +2146,7 @@ MCNTRL_PS_CMD = int
 DEBUG_SHIFT_DATA__TYPE = str
 MCNTRL_SCANLINE_CHN3_ADDR__TYPE = str
 STATUS_2LSB_SHFT__RAW = str
+CLK_DIV_PHASE__RAW = str
 STATUS_MSB_RSHFT__RAW = str
 SLEW_CMDA__RAW = str
 HISPI_MMCM0__RAW = str

--- a/py393/x393_cmprs.py
+++ b/py393/x393_cmprs.py
@@ -350,6 +350,7 @@ class X393Cmprs(object):
                              num_sensor,
                              command,
                              reset_frame = False,
+                              copy_frame = False,
                              verbose = 1):
        """
        Control memory access (write) of a sensor channel
@@ -360,6 +361,7 @@ class X393Cmprs(object):
               single      - acquire single frame ,
               repetitive  - repetitive mode
        @param reset_frame - reset frame number
+        @param copy_frame  copy frame number from the master channel (non-persistent)
        @param vebose -      verbose level       
        """
        try:
@@ -369,6 +371,7 @@ class X393Cmprs(object):
                    self.control_compressor_memory(num_sensor = num_sensor,
                                                   command =    command,
                                                   reset_frame = reset_frame,
+                                                   copy_frame = copy_frame,
                                                   verbose =    verbose)
                return
        except:
@@ -406,7 +409,8 @@ class X393Cmprs(object):
                                   extra_pages =  0,
                                   write_mem =    False,
                                   enable =       en,
-                                   chn_reset =    rst)
+                                   chn_reset =    rst,
+                                   copy_frame = copy_frame)
        
        self.x393_axi_tasks.write_control_register(base_addr + vrlg.MCNTRL_TILED_MODE,  mode) 
        if verbose > 0 :

--- a/py393/x393_export_c.py
+++ b/py393/x393_export_c.py
@@ -277,6 +277,11 @@ class X393ExportC(object):
                                 data =      self._enc_window_frame_sa(),
                                 name =      "x393_mcntrl_window_frame_sa",  typ="wo",
                                 frmt_spcs = frmt_spcs)
+        stypedefs += self.get_typedef32(comment =   "Delay start of the channel from sensor frame sync (to allow frame sequencer issue commands)",
+                                 data =      self._enc_frame_start_dly(),
+                                 name =      "x393_mcntrl_frame_start_dly",  typ="wo",
+                                 frmt_spcs = frmt_spcs)
+        
        stypedefs += self.get_typedef32(comment =   "PS PIO (software-programmed DDR3) access sequences enable and reset",
                                 data =      self._enc_ps_pio_en_rst(),
                                 name =      "x393_ps_pio_en_rst",  typ="wo",
@@ -702,7 +707,8 @@ class X393ExportC(object):
            (("X393_SENS_MCNTRL_SCANLINE_FRAME_FULL_WIDTH",c, vrlg.MCNTRL_SCANLINE_FRAME_FULL_WIDTH + ba, ia, z3, "x393_mcntrl_window_full_width", "wo",     "Set frame full(padded) width")),
            (("X393_SENS_MCNTRL_SCANLINE_WINDOW_WH",       c, vrlg.MCNTRL_SCANLINE_WINDOW_WH +        ba, ia, z3, "x393_mcntrl_window_width_height", "wo",   "Set frame window size")),
            (("X393_SENS_MCNTRL_SCANLINE_WINDOW_X0Y0",     c, vrlg.MCNTRL_SCANLINE_WINDOW_X0Y0 +      ba, ia, z3, "x393_mcntrl_window_left_top", "wo",       "Set frame position")),
-            (("X393_SENS_MCNTRL_SCANLINE_STARTXY",         c, vrlg.MCNTRL_SCANLINE_WINDOW_STARTXY +   ba, ia, z3, "x393_mcntrl_window_startx_starty", "wo",  "Set startXY register"))]
+            (("X393_SENS_MCNTRL_SCANLINE_STARTXY",         c, vrlg.MCNTRL_SCANLINE_WINDOW_STARTXY +   ba, ia, z3, "x393_mcntrl_window_startx_starty", "wo",  "Set startXY register")),
+            (("X393_SENS_MCNTRL_SCANLINE_START_DELAY",     c, vrlg.MCNTRL_SCANLINE_START_DELAY +      ba, ia, z3, "x393_mcntrl_frame_start_dly", "wo",       "Set dDelay start of the channel from sensor frame sync"))]
        ba = vrlg.MCONTR_CMPRS_BASE
        ia = vrlg.MCONTR_CMPRS_INC
        sdefines +=[
@@ -1642,17 +1648,18 @@ class X393ExportC(object):
             
    def _enc_func_encode_mode_scan_tiled(self):
        dw=[]
-        dw.append(("chn_nreset",   vrlg.MCONTR_LINTILE_EN,1,1,        "0: immediately reset all the internal circuitry"))
-        dw.append(("enable",       vrlg.MCONTR_LINTILE_NRESET,1,1,    "enable requests from this channel ( 0 will let current to finish, but not raise want/need)"))
+        dw.append(("enable",       vrlg.MCONTR_LINTILE_EN,1,1,        "enable requests from this channel ( 0 will let current to finish, but not raise want/need)"))
+        dw.append(("chn_nreset",   vrlg.MCONTR_LINTILE_NRESET,1,1,    "0: immediately reset all the internal circuitry"))
        dw.append(("write_mem",    vrlg.MCONTR_LINTILE_WRITE,1,0,     "0 - read from memory, 1 - write to memory"))
        dw.append(("extra_pages",  vrlg.MCONTR_LINTILE_EXTRAPG, vrlg.MCONTR_LINTILE_EXTRAPG_BITS,0, "2-bit number of extra pages that need to stay (not to be overwritten) in the buffer"))
        dw.append(("keep_open",    vrlg.MCONTR_LINTILE_KEEP_OPEN,1,0, "for 8 or less rows - do not close page between accesses (not used in scanline mode)"))
        dw.append(("byte32",       vrlg.MCONTR_LINTILE_BYTE32,1,1,    "32-byte columns (0 - 16-byte), not used in scanline mode"))
-        dw.append(("reset_frame",  vrlg.MCONTR_LINTILE_RST_FRAME,1,0, "reset frame number"))
+        dw.append(("reset_frame",  vrlg.MCONTR_LINTILE_RST_FRAME,1,0, "reset frame number (also resets buffer at next frame start)"))
        dw.append(("single",       vrlg.MCONTR_LINTILE_SINGLE,1,0,    "run single frame"))
        dw.append(("repetitive",   vrlg.MCONTR_LINTILE_REPEAT,1,1,    "run repetitive frames"))
        dw.append(("disable_need", vrlg.MCONTR_LINTILE_DIS_NEED,1,0,  "disable 'need' generation, only 'want' (compressor channels)"))
        dw.append(("skip_too_late",vrlg.MCONTR_LINTILE_SKIP_LATE,1,0, "Skip over missed blocks to preserve frame structure (increment pointers)"))
+        dw.append(("copy_frame",   vrlg.MCONTR_LINTILE_COPY_FRAME,1,0, "Copy frame number from the master (sensor) channel. Combine with reset_frame to reset bjuffer"))
        return dw
    """
        self.x393_axi_tasks.write_control_register(
@@ -1704,6 +1711,12 @@ class X393ExportC(object):
        dw.append(("frame_sa",      0,22,0,        "22-bit frame start address (3 CA LSBs==0. BA==0)"))
        return dw

+    def _enc_frame_start_dly(self):
+        dw=[]
+        dw.append(("start_dly",      0,vrlg.MCNTRL_SCANLINE_DLY_WIDTH,vrlg.MCNTRL_SCANLINE_DLY_DEFAULT, "delay start pulse by mclk"))
+        return dw
+    
+    
    def _enc_status_control(self):
        dw=[]
        dw.append(("seq_num",      0,6,0,        "6-bit sequence number to be used with the next status response"))
@@ -1909,7 +1922,7 @@ class X393ExportC(object):

    def _enc_sens_sync_late(self):
        dw=[]
-        dw.append(("mult_frames",      0, vrlg.SENS_SYNC_LBITS,   0,  "Number of lines to delay late frame sync"))
+        dw.append(("delay_fsync",      0, vrlg.SENS_SYNC_LBITS,   0,  "Number of lines to delay late frame sync"))
        return dw

    def _enc_mcntrl_priorities(self):

--- a/py393/x393_jpeg.py
+++ b/py393/x393_jpeg.py
@@ -1343,6 +1343,11 @@ write_cmd_frame_sequencer  0  1  1  0x700  0xa0
 write_cmd_frame_sequencer  0  1  1  0x700  0x50
 write_cmd_frame_sequencer  0  0  3  0x700  0xa000
 write_cmd_frame_sequencer  0  1  0  0x700  0x90
+write_cmd_frame_sequencer  0  0  2  0x438  0x5 # set gamma_bayer = 1
+write_cmd_frame_sequencer  0  0  2  0x600  0x14c000 # set bayer =  1
+write_cmd_frame_sequencer  0  0  3  0x438  0x4 # set gamma_bayer = 0
+write_cmd_frame_sequencer  0  0  3  0x600  0x1cc000 # set bayer =  3
+
 write_cmd_frame_sequencer  0  0  2  0x700  0xe00
 write_cmd_frame_sequencer  0  0  3  0x700  0xa
 write_cmd_frame_sequencer  0  0  2  0x700  0x6
@@ -1352,6 +1357,13 @@ write_cmd_frame_sequencer  0  0  2  0x700  0x90
 write_cmd_frame_sequencer  0  0  2  0x700  0x600
 write_cmd_frame_sequencer  0  0  2  0x700  0x900

+#stop compressor memory @2, restart @3 and copy frame number # Better to turn off compressor before resetting memory channel
+write_cmd_frame_sequencer  0  0  2  0x600  0x5 # stop compressor 
+write_cmd_frame_sequencer  0  0  2  0x6c0  0x1c49 # enable off
+#write_cmd_frame_sequencer  0  0  3  0x6c0  0x3c4b # enable on, copy frame
+write_cmd_frame_sequencer  0  0  3  0x6c0  0x3d4b # enable on, copy frame, reset buffer
+write_cmd_frame_sequencer  0  0  3  0x600  0x7 # run compressor (after memory?) 
+
 #set_sensor_io_dly_hispi all 0x48 0x68 0x68 0x68 0x68
 #set_sensor_io_ctl all None None None None None 1 None # load all delays?
 compressor_control  all  None  None  None None None  2
@@ -1360,6 +1372,9 @@ compressor_interrupt_control all en
 compressor_control  all  3
 jpeg_sim_multi 4
 jpeg_sim_multi 8
+
+
+
 jpeg_sim_multi 8

 ctrl_cmd_frame_sequencer  0  0  1 0
@@ -1387,6 +1402,48 @@ x393 (localhost:7777) +0.147s--> compressor_interrupt_control 2 en
 x393 (localhost:7777) +0.150s--> compressor_interrupt_control 3 en
 x393 (localhost:7777) +0.162s--> compressor_control  all  3

+################## Simulate Parallel 2 ####################
+./py393/test_mcntrl.py @py393/cocoargs  --simulated=localhost:7777
+measure_all "*DI"
+setup_all_sensors True None 0xf
+set_sensor_io_ctl  all None None 1 # Set ARO low - check if it is still needed?
+#just testing
+set_gpio_ports  1 # enable software gpio pins - just for testing. Also needed for legacy i2c!
+set_gpio_pins 0 1 # pin 0 low, pin 1 - high
+#sequencer test
+#ctrl_cmd_frame_sequencer  <num_sensor>  <reset=False>  <start=False>  <stop=False>
+ctrl_cmd_frame_sequencer   0  0  1  0
+write_cmd_frame_sequencer  0  1  1  0x700  0x6
+write_cmd_frame_sequencer  0  1  1  0x700  0x9
+write_cmd_frame_sequencer  0  1  1  0x700  0xa0
+write_cmd_frame_sequencer  0  1  1  0x700  0x50
+write_cmd_frame_sequencer  0  0  3  0x700  0xa000
+write_cmd_frame_sequencer  0  1  0  0x700  0x90
+write_cmd_frame_sequencer  0  0  2  0x700  0xe00
+write_cmd_frame_sequencer  0  0  3  0x700  0xa
+write_cmd_frame_sequencer  0  0  2  0x700  0x6
+write_cmd_frame_sequencer  0  0  2  0x700  0x9
+write_cmd_frame_sequencer  0  0  2  0x700  0x60
+write_cmd_frame_sequencer  0  0  2  0x700  0x90
+write_cmd_frame_sequencer  0  0  2  0x700  0x600
+write_cmd_frame_sequencer  0  0  2  0x700  0x900
+
+#stop compressor memory @2, restart @3 and copy frame number # Better to turn off compressor before resetting memory channel
+write_cmd_frame_sequencer  0  1  2  0x600  0x5 # stop compressor 
+#write_cmd_frame_sequencer  0  1  2  0x6c0  0x1c49 # enable off
+#write_cmd_frame_sequencer  0  1  3  0x6c0  0x3c4b # enable on, copy frame
+#write_cmd_frame_sequencer  0  1  3  0x6c0  0x3d4b # enable on, copy frame, reset buffer
+write_cmd_frame_sequencer  0  1  3  0x600  0x7 # run compressor (after memory?) 
+
+#set_sensor_io_dly_hispi all 0x48 0x68 0x68 0x68 0x68
+#set_sensor_io_ctl all None None None None None 1 None # load all delays?
+compressor_control  all  None  None  None None None  2
+compressor_interrupt_control all clr
+compressor_interrupt_control all en
+compressor_control  all  3
+jpeg_sim_multi 4
+jpeg_sim_multi 8
+


 ################## Serial ####################

--- a/py393/x393_mcntrl.py
+++ b/py393/x393_mcntrl.py
@@ -50,7 +50,8 @@ def func_encode_mode_scan_tiled   (skip_too_late = False,
                                   extra_pages =  0,
                                   write_mem =    False,
                                   enable =       True,
-                                   chn_reset =    False):
+                                   chn_reset =    False,
+                                   copy_frame =   False):
    """
    Combines arguments to create a 12-bit encoded data for scanline mode memory R/W
    @param skip_too_late - Skip over missed blocks to preserve frame structure (increment pointers),
@@ -64,7 +65,8 @@ def func_encode_mode_scan_tiled   (skip_too_late = False,
                    This argument can be used for  read access with horizontal overlapping tiles
    @param write_mem,    write to memory mode (0 - read from memory)
    @param enable,       enable requests from this channel ( 0 will let current to finish, but not raise want/need)
-    @param chn_reset):   immediately reset all the internal circuitry
+    @param chn_reset   immediately reset all the internal circuitry
+    @param copy_frame  copy frame number from the master channel (non-persistent)
    
    """
    rslt = 0;
@@ -80,6 +82,7 @@ def func_encode_mode_scan_tiled   (skip_too_late = False,
    rslt |= (0,1)[repetitive] <<    vrlg.MCONTR_LINTILE_REPEAT
    rslt |= (0,1)[disable_need] <<  vrlg.MCONTR_LINTILE_DIS_NEED
    rslt |= (0,1)[skip_too_late] << vrlg.MCONTR_LINTILE_SKIP_LATE
+    rslt |= (0,1)[copy_frame] <<    vrlg.MCONTR_LINTILE_COPY_FRAME
    return rslt

 '''

--- a/x393.v
+++ b/x393.v
@@ -532,6 +532,7 @@ module  x393 #(
    wire                     [3:0] cmprs_frame_done_dst;   // input single-cycle pulse when the full frame (window) was transferred to/from DDR3 memory
                                                           // use as 'eot_real' in 353 
    wire                     [3:0] cmprs_suspend;          // output suspend reading data for this channel - waiting for the source data
+//    wire                     [3:0] cmprs_master_follow;    // compressor memory is in dependent mode, frame number should be copied from sesnor, not reset to 0
    wire   [4*LAST_FRAME_BITS-1:0] cmprs_frame_number_finished;  // frame numbers compressed
    

@@ -1355,6 +1356,7 @@ assign axi_grst = axi_rst_pre;
        .cmprs_frame_number_dst    (cmprs_frame_number_dst),     // output[63:0] 
        .cmprs_frame_done_dst      (cmprs_frame_done_dst),       // output[3:0] 
        .cmprs_suspend             (cmprs_suspend),              // input[3:0] 
+//        .master_follow             (cmprs_master_follow),        // input[3:0] 
        
 // Originally implemented channels, some are just for testing and may be replaced        
        .frame_start_chn1          (frame_start_chn1),           // input

--- a/x393_parallel.bit
+++ b/x393_parallel.bit