Skip to content

E
eddr3
Commit 3d67d687 authored by Andrey Filippov's avatar Andrey Filippov
Browse files
Options

debugging, next snapshot

parent 8b1e18d4
Show whitespace changes
Inline Side-by-side
Showing with 981 additions and 121 deletions
.project
View file @ 3d67d687
......@@ -51,7 +51,7 @@
<link>
<name>vivado_logs/VivadoOpt.log</name>
<type>1</type>
<location>/data/vdt/vdt-projects/eddr3/vivado_logs/VivadoOpt-20140522152648076.log</location>
<location>/data/vdt/vdt-projects/eddr3/vivado_logs/VivadoOpt-20140522174846453.log</location>
</link>
<link>
<name>vivado_logs/VivadoOptPhys.log</name>
......@@ -61,12 +61,12 @@
<link>
<name>vivado_logs/VivadoOptPower.log</name>
<type>1</type>
<location>/data/vdt/vdt-projects/eddr3/vivado_logs/VivadoOptPower-20140522152648076.log</location>
<location>/data/vdt/vdt-projects/eddr3/vivado_logs/VivadoOptPower-20140522174846453.log</location>
</link>
<link>
<name>vivado_logs/VivadoPlace.log</name>
<type>1</type>
<location>/data/vdt/vdt-projects/eddr3/vivado_logs/VivadoPlace-20140522152648076.log</location>
<location>/data/vdt/vdt-projects/eddr3/vivado_logs/VivadoPlace-20140522174846453.log</location>
</link>
<link>
<name>vivado_logs/VivadoRoute.log</name>
......@@ -76,7 +76,7 @@
<link>
<name>vivado_logs/VivadoSynthesis.log</name>
<type>1</type>
<location>/data/vdt/vdt-projects/eddr3/vivado_logs/VivadoSynthesis-20140522152648076.log</location>
<location>/data/vdt/vdt-projects/eddr3/vivado_logs/VivadoSynthesis-20140522174846453.log</location>
</link>
<link>
<name>vivado_logs/VivadoTimimgSummaryReportImplemented.log</name>
......@@ -86,7 +86,7 @@
<link>
<name>vivado_logs/VivadoTimimgSummaryReportSynthesis.log</name>
<type>1</type>
<location>/data/vdt/vdt-projects/eddr3/vivado_logs/VivadoTimimgSummaryReportSynthesis-20140522152648076.log</location>
<location>/data/vdt/vdt-projects/eddr3/vivado_logs/VivadoTimimgSummaryReportSynthesis-20140522174846453.log</location>
</link>
<link>
<name>vivado_logs/VivadoTimingReportImplemented.log</name>
......@@ -96,7 +96,7 @@
<link>
<name>vivado_logs/VivadoTimingReportSynthesis.log</name>
<type>1</type>
<location>/data/vdt/vdt-projects/eddr3/vivado_logs/VivadoTimingReportSynthesis-20140522152648076.log</location>
<location>/data/vdt/vdt-projects/eddr3/vivado_logs/VivadoTimingReportSynthesis-20140522174846453.log</location>
</link>
<link>
<name>vivado_state/eddr3-opt-phys.dcp</name>
......@@ -106,7 +106,7 @@
<link>
<name>vivado_state/eddr3-place.dcp</name>
<type>1</type>
<location>/data/vdt/vdt-projects/eddr3/vivado_state/eddr3-place-20140522152648076.dcp</location>
<location>/data/vdt/vdt-projects/eddr3/vivado_state/eddr3-place-20140522174846453.dcp</location>
</link>
<link>
<name>vivado_state/eddr3-route.dcp</name>
......@@ -116,7 +116,7 @@
<link>
<name>vivado_state/eddr3-synth.dcp</name>
<type>1</type>
<location>/data/vdt/vdt-projects/eddr3/vivado_state/eddr3-synth-20140522152648076.dcp</location>
<location>/data/vdt/vdt-projects/eddr3/vivado_state/eddr3-synth-20140522174846453.dcp</location>
</link>
</linkedResources>
</projectDescription>
ddrc_control.v
View file @ 3d67d687
......@@ -61,7 +61,11 @@ module ddrc_control #(
parameter PAGES_REL_MASK = 'h3ff, // address mask to set DQM and DQS patterns
parameter CMDA_EN_REL = 'h022, // address to enable('h823)/disable('h822) command/address outputs
parameter CMDA_EN_REL_MASK = 'h3fe, // address mask for command/address outputs
parameter EXTRA_REL = 'h024, // address to set extra parameters (currently just inv_clk_div)
parameter SDRST_ACT_REL = 'h024, // address to activate('h825)/deactivate('h8242) active-low reset signal to DDR3 memory
parameter SDRST_ACT_REL_MASK ='h3fe, // address mask for reset DDR3
parameter CKE_EN_REL = 'h026, // address to enable('h827)/disable('h826) CKE signal to memory
parameter CKE_EN_REL_MASK = 'h3fe, // address mask for command/address outputs
parameter EXTRA_REL = 'h028, // address to set extra parameters (currently just inv_clk_div)
parameter EXTRA_REL_MASK = 'h3ff // address mask for extra parameters
)(
input clk,
......@@ -85,7 +89,10 @@ module ddrc_control #(
output ld_delay, // write dly_data to dly_address, one mclk active pulse
output dly_set, // transfer (activate) all delays simultaneosly, 1 mclk pulse
// control: additional signals
output cmda_tri, // tri-state all command and address lines to DDR chip
output cmda_en, // tri-state all command and address lines to DDR chip
output ddr_rst, // generate DDR3 memory reset signal
output ddr_cke, // control DDR3 memory CKE signal
output inv_clk_div, // invert clk_div to ISERDES
output [ 7:0] dqs_pattern, // DQS pattern during write (normally 8'h55)
output [ 7:0] dqm_pattern, // DQM pattern (just for testing, should be 8'h0)
......@@ -108,6 +115,12 @@ module ddrc_control #(
localparam PAGES_ADDR_MASK = CONTROL_ADDR_MASK | PAGES_REL_MASK; // address mask to set DQM and DQS patterns
localparam CMDA_EN_ADDR = CONTROL_ADDR | CMDA_EN_REL; // address to enable('h823)/disable('h822) command/address outputs
localparam CMDA_EN_ADDR_MASK = CONTROL_ADDR_MASK | CMDA_EN_REL_MASK; // address mask for command/address outputs
localparam SDRST_ACT_ADDR = CONTROL_ADDR | SDRST_ACT_REL; // address to activate('h825)/deactivate('h8242) active-low reset signal to DDR3 memory
localparam SDRST_ACT_ADDR_MASK =CONTROL_ADDR_MASK | SDRST_ACT_REL_MASK; // address mask for reset DDR3
localparam CKE_EN_ADDR = CONTROL_ADDR | CKE_EN_REL; // address to enable('h827)/disable('h826) CKE signal to memory
localparam CKE_EN_ADDR_MASK = CONTROL_ADDR_MASK | CKE_EN_REL_MASK; // address mask for CKE
localparam EXTRA_ADDR = CONTROL_ADDR | EXTRA_REL; // address to set extra parameters (currently just inv_clk_div)
localparam EXTRA_ADDR_MASK = CONTROL_ADDR_MASK | EXTRA_REL_MASK; // address mask for extra parameters
......@@ -133,6 +146,9 @@ module ddrc_control #(
reg [ 1:0] port1_page_r; // port 1 buffer write page (to be controlled by arbiter later, set to 2'b0)
reg [ 1:0] port1_int_page_r; // port 1 PHY-side buffer read page (to be controlled by arbiter later, set to 2'b0)
reg cmda_en_r; // enable (tri-state off) all command and address lines to DDR chip
reg ddr_rst_r; // generate DDR3 memory reset
reg ddr_cke_r; // enable CKE to memory
reg inv_clk_div_r; // invert clk_div to ISERDES
assign ld_delay = dly_ld_r;
......@@ -141,7 +157,7 @@ module ddrc_control #(
assign dly_addr = waddr_fifo_out_r[ 6:0]; //WARNING: [Synth 8-3936] Found unconnected internal register 'waddr_fifo_out_r_reg' and it is trimmed from '12' to '7' bits. [ddrc_control.v:101]
assign run_addr = wdata_fifo_out_r[10:0];
assign run_chn = waddr_fifo_out_r[3:0];
assign run_seq = run_seq_r;
assign run_seq = run_seq_r && !ddr_rst;
assign busy=busy_r && (start_wburst?(((pre_waddr ^ BUSY_WR_ADDR) & BUSY_WR_ADDR_MASK)==0): selected_busy);
......@@ -151,7 +167,9 @@ module ddrc_control #(
assign port0_int_page = port0_int_page_r[1:0];
assign port1_page = port1_page_r[1:0];
assign port1_int_page = port1_int_page_r[1:0];
assign cmda_tri = ~cmda_en_r;
assign cmda_en = cmda_en_r;
assign ddr_rst= ddr_rst_r;
assign ddr_cke= ddr_cke_r;
assign inv_clk_div = inv_clk_div_r;
always @ (posedge clk or posedge rst) begin
......@@ -202,6 +220,14 @@ module ddrc_control #(
else if (fifo_re && (((waddr_fifo_out ^ CMDA_EN_ADDR) & CMDA_EN_ADDR_MASK)==0))
cmda_en_r <= waddr_fifo_out[0];
if (rst) ddr_rst_r <= 1'b1; // enable DDR3 reset at system reset
else if (fifo_re && (((waddr_fifo_out ^ SDRST_ACT_ADDR) & SDRST_ACT_ADDR_MASK)==0))
ddr_rst_r <= waddr_fifo_out[0];
if (rst) ddr_cke_r <= 1'b0;
else if (fifo_re && (((waddr_fifo_out ^ CKE_EN_ADDR) & CKE_EN_ADDR_MASK)==0))
ddr_cke_r <= waddr_fifo_out[0];
if (rst) inv_clk_div_r <= 1'b0;
else if (fifo_re && (((waddr_fifo_out ^ EXTRA_ADDR) & EXTRA_ADDR_MASK)==0))
inv_clk_div_r <= wdata_fifo_out[0];
......
ddrc_test01.v
View file @ 3d67d687
......@@ -72,12 +72,15 @@ module ddrc_test01 #(
parameter PAGES_REL_MASK = 'h3ff, // address mask to set DQM and DQS patterns
parameter CMDA_EN_REL = 'h022, // address to enable('h823)/disable('h822) command/address outputs
parameter CMDA_EN_REL_MASK = 'h3fe, // address mask for command/address outputs
parameter EXTRA_REL = 'h024, // address to set extra parameters (currently just inv_clk_div)
parameter SDRST_ACT_REL = 'h024, // address to activate('h825)/deactivate('h824) active-low reset signal to DDR3 memory
parameter SDRST_ACT_REL_MASK = 'h3fe, // address mask for reset DDR3
parameter CKE_EN_REL = 'h026, // address to enable('h827)/disable('h826) CKE signal to memory
parameter CKE_EN_REL_MASK = 'h3fe, // address mask for command/address outputs
parameter EXTRA_REL = 'h028, // address to set extra parameters (currently just inv_clk_div)
parameter EXTRA_REL_MASK = 'h3ff // address mask for extra parameters
)(
// DDR3 interface
output SDRST, // DDR3 reset (active low)
output SDCLK, // DDR3 clock differential output, positive
output SDNCLK,// DDR3 clock differential output, negative
output [ADDRESS_NUMBER-1:0] SDA, // output address ports (14:0) for 4Gb device
......@@ -99,9 +102,7 @@ module ddrc_test01 #(
);
localparam ADDRESS_NUMBER=15;
// Source for reset and clock
(* keep = "true" *)
wire [3:0] fclk; // PL Clocks [3:0], output
(* keep = "true" *)
wire [3:0] frst; // PL Clocks [3:0], output
......@@ -110,7 +111,7 @@ module ddrc_test01 #(
(* keep = "true" *)
wire axi_aclk; // clock - should be buffered
// wire axi_aresetn; // reset, active low
(* keep = "true" *)
(* dont_touch = "true" *)
wire axi_rst; // reset, active high
// AXI Write Address
wire [31:0] axi_awaddr; // AWADDR[31:0], input
......@@ -209,7 +210,10 @@ module ddrc_test01 #(
wire [ 1:0] port1_int_page;// input[1:0]
// additional control signals
wire cmda_tri; // input
wire cmda_en; // enable DDR3 memory control and addreee outputs
wire ddr_rst; // generate DDR3 memory reset (active hight)
wire ddr_cke; // control of the DDR3 memory CKE signal
wire inv_clk_div; // input
wire [ 7:0] dqs_pattern; // input[7:0] 8'h55
wire [ 7:0] dqm_pattern; // input[7:0] 8'h00
......@@ -236,13 +240,26 @@ module ddrc_test01 #(
always @ (posedge axi_rst or posedge axi_aclk) begin
if (axi_rst) select_port0 <= 1'b0;
else if (axird_start_burst) select_port0 <= (((axird_pre_araddr[11:10]^ PORT0_RD_ADDR) & PORT0_RD_ADDR_MASK)==0);
else if (axird_start_burst) select_port0 <= (((axird_pre_araddr^ PORT0_RD_ADDR) & PORT0_RD_ADDR_MASK)==0);
if (axi_rst) select_status <= 1'b0;
else if (axird_start_burst) select_status <= (((axird_pre_araddr[11:10]^ STATUS_ADDR) & STATUS_ADDR_MASK)==0);
else if (axird_start_burst) select_status <= (((axird_pre_araddr^ STATUS_ADDR) & STATUS_ADDR_MASK)==0);
end
/*
// Clock and reset from PS
BUFG bufg_axi_rst_i (.O(axi_rst),.I(~frst[0]));
reg frst_inv;
always @ (negedge frst[0] or posedge axi_aclk) begin
if (!frst[0]) frst_inv <= 1'b1;
else frst_inv <= 1'b0;
end
*/
`ifndef IVERILOG
(* dont_touch = "true" *)
`endif
wire frst_inv= ~frst[0];
//BUFG bufg_axi_rst_i (.O(axi_rst),.I(~frst[0]));
BUFG bufg_axi_rst_i (.O(axi_rst),.I(frst_inv));
BUFG bufg_axi_aclk_i (.O(axi_aclk),.I(fclk[0]));
axibram_write #(
......@@ -325,6 +342,10 @@ BUFG bufg_axi_aclk_i (.O(axi_aclk),.I(fclk[0]));
.PAGES_REL_MASK (PAGES_REL_MASK),
.CMDA_EN_REL (CMDA_EN_REL),
.CMDA_EN_REL_MASK (CMDA_EN_REL_MASK),
.SDRST_ACT_REL (SDRST_ACT_REL),
.SDRST_ACT_REL_MASK(SDRST_ACT_REL_MASK),
.CKE_EN_REL (CKE_EN_REL),
.CKE_EN_REL_MASK (CKE_EN_REL_MASK),
.EXTRA_REL (EXTRA_REL),
.EXTRA_REL_MASK (EXTRA_REL_MASK)
) ddrc_control_i (
......@@ -344,7 +365,9 @@ BUFG bufg_axi_aclk_i (.O(axi_aclk),.I(fclk[0]));
.dly_addr (dly_addr[6:0]), // output[6:0]
.ld_delay (ld_delay), // output
.dly_set (set), // output
.cmda_tri (cmda_tri), // output
.cmda_en (cmda_en), // output
.ddr_rst (ddr_rst), // output
.ddr_cke (ddr_cke), // output
.inv_clk_div (inv_clk_div), // output
.dqs_pattern (dqs_pattern[7:0]), // output[7:0]
.dqm_pattern (dqm_pattern[7:0]), // output[7:0]
......@@ -406,6 +429,7 @@ BUFG bufg_axi_aclk_i (.O(axi_aclk),.I(fclk[0]));
.CMD_PAUSE_BITS (CMD_PAUSE_BITS),
.CMD_DONE_BIT (CMD_DONE_BIT)
) ddrc_sequencer_i (
.SDRST (SDRST), // output
.SDCLK (SDCLK), // output
.SDNCLK (SDNCLK), // output
.SDA (SDA[14:0]), // output[14:0] // BUG with localparam - fixed
......@@ -437,7 +461,8 @@ BUFG bufg_axi_aclk_i (.O(axi_aclk),.I(fclk[0]));
.run_addr (run_addr[10:0]), // input[10:0]
.run_chn (run_chn[3:0]), // input[3:0]
.run_seq (run_seq), // input
.run_seq (run_seq), // input #################### DISABLED ####################
// .run_seq (1'b0 && run_seq), // input #################### DISABLED ####################
// .run_done (run_done), // output
.run_done (), // output
.run_busy (run_busy), // output
......@@ -462,7 +487,9 @@ BUFG bufg_axi_aclk_i (.O(axi_aclk),.I(fclk[0]));
.port1_int_page (port1_int_page[1:0]), // input[1:0]
.port1_addr (axiwr_bram_waddr[7:0]), // input[7:0]
.port1_data (axiwr_bram_wdata[31:0]), // input[31:0]
.cmda_tri (cmda_tri), // input
.cmda_en (cmda_en), // input
.ddr_rst (ddr_rst), // input
.ddr_cke (ddr_cke), // input
.inv_clk_div (inv_clk_div), // input
.dqs_pattern (dqs_pattern), // input[7:0]
.dqm_pattern (dqm_pattern) // input[7:0]
......
ddrc_test01.xdc
View file @ 3d67d687
......@@ -19,6 +19,10 @@
# along with this program. If not, see <http://www.gnu.org/licenses/> .
#################################################################################
# output SDRST, // output SDRST, active low
set_property IOSTANDARD SSTL15 [get_ports {SDRST}]
set_property PACKAGE_PIN J4 [get_ports {SDRST}]
# output SDCLK, // DDR3 clock differential output, positive
set_property IOSTANDARD DIFF_SSTL15 [get_ports {SDCLK}]
set_property PACKAGE_PIN K3 [get_ports {SDCLK}]
......
ddrc_test01_testbench.sav
View file @ 3d67d687
[*]
[*] GTKWave Analyzer v3.3.49 (w)1999-2013 BSI
[*] Thu May 22 08:13:51 2014
[*] Wed May 28 04:28:28 2014
[*]
[dumpfile] "/data/vdt/vdt-projects/eddr3/simulation/ddrc_test01_testbench-20140522015451433.lxt"
[dumpfile_mtime] "Thu May 22 07:55:55 2014"
[dumpfile_size] 62511235
[dumpfile] "/data/vdt/vdt-projects/eddr3/simulation/ddrc_test01_testbench-20140527222157916.lxt"
[dumpfile_mtime] "Wed May 28 04:22:46 2014"
[dumpfile_size] 27032362
[savefile] "/data/vdt/vdt-projects/eddr3/ddrc_test01_testbench.sav"
[timestart] 103533370
[size] 1830 1145
[pos] -1 -1
*-11.053656 103539375 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
[timestart] 104472690
[size] 1920 1180
[pos] -1920 108
*-13.962209 104565000 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
[treeopen] ddrc_test01_testbench.
[treeopen] ddrc_test01_testbench.ddrc_test01_i.
[treeopen] ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.
[treeopen] ddrc_test01_testbench.ddrc_test01_i.axibram_write_i.
[treeopen] ddrc_test01_testbench.ddrc_test01_i.ddrc_control_i.
[treeopen] ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.
......@@ -21,10 +22,10 @@
[treeopen] ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.pll_base_i.PLLE2_BASE_i.
[treeopen] ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.pll_base_i.PLLE2_BASE_i.plle2_adv_1.
[treeopen] ddrc_test01_testbench.simul_axi_master_wdata_i.
[sst_width] 305
[signals_width] 348
[sst_width] 210
[signals_width] 368
[sst_expanded] 1
[sst_vpaned_height] 646
[sst_vpaned_height] 820
@28
ddrc_test01_testbench.RST[0]
ddrc_test01_testbench.CLK[0]
......@@ -698,8 +699,6 @@ ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.dq[15:0
@28
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.dqsl[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.dqsu[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.iclk[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.iclk_pre[0]
@22
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.in_a[29:0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.in_ba[5:0]
......@@ -735,16 +734,14 @@ ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.tin_dq[
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.tin_dqs[7:0]
@1401200
-phy_top_i
@800200
@c00200
-mmcm_phase_cntr
@28
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.mmcm_phase_cntr_i.clkfbin[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.mmcm_phase_cntr_i.clkfbout[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.mmcm_phase_cntr_i.clkfboutb[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.mmcm_phase_cntr_i.clkin[0]
@29
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.mmcm_phase_cntr_i.clkout0[0]
@28
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.mmcm_phase_cntr_i.clkout0b[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.mmcm_phase_cntr_i.clkout1[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.mmcm_phase_cntr_i.clkout1b[0]
......@@ -778,7 +775,7 @@ ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.mmcm_ph
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.mmcm_phase_cntr_i.psincdec[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.mmcm_phase_cntr_i.pwrdwn[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.mmcm_phase_cntr_i.rst[0]
@1000200
@1401200
-mmcm_phase_cntr
@c00200
-idelay_ctrl_i
......@@ -794,8 +791,8 @@ ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_top_i.idelay_
ddrc_test01_testbench.ddrc_test01_i.ddrc_control_i.busy[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_control_i.busy_r[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_control_i.clk[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_control_i.cmda_en[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_control_i.cmda_en_r[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_control_i.cmda_tri[0]
@22
ddrc_test01_testbench.ddrc_test01_i.ddrc_control_i.dly_addr[6:0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_control_i.dly_data[7:0]
......@@ -884,6 +881,7 @@ ddrc_test01_testbench.ddrc_test01_i.ddrc_control_i.fifo_cross_clocks_i.we[0]
@c00200
-phy_cmd_i
@28
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.SDRST[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.DQSL[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.DQSU[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.NDQSL[0]
......@@ -912,6 +910,7 @@ ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.buf_wdata[63:0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.buf_wr[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.clk_div[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.clk_in[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.cmda_en[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.cmda_tri[0]
@22
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.dly_addr[6:0]
......@@ -969,6 +968,7 @@ ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_ps_rdy[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_rcw[5:0]
@28
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_rcw_in[2:0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_rcw_pos[2:0]
@22
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_rdata[63:0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_i.phy_rdata_r[63:0]
......@@ -1011,6 +1011,7 @@ ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.SDD[15:0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.SDNCLK[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.SDODT[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.SDRAS[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.SDRST[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.SDWE[0]
@22
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.buf1_rdata[63:0]
......@@ -1048,11 +1049,17 @@ ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd1_data[31:0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd1_we[0]
@22
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd_addr[9:0]
@28
@800028
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd_busy[2:0]
@28
(0)ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd_busy[2:0]
(1)ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd_busy[2:0]
(2)ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd_busy[2:0]
@1001200
-group_end
@28
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd_fetch[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd_sel[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmda_tri[0]
@22
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.dly_addr[6:0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.dly_data[7:0]
......@@ -1097,6 +1104,10 @@ ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.port1_we[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.ps_out[7:0]
@28
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.ps_rdy[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.ren0[0]
@22
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.ren1[0]
@28
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.rst[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.rst_in[0]
@22
......@@ -1114,6 +1125,71 @@ ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.sequence_done[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.set[0]
@1401200
-ddrc_sequencer
@800200
-ddr_sequencer_i_selected
@29
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.SDCLK[0]
@28
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.SDCKE[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.SDBA[2:0]
@22
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.SDA[14:0]
@28
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.SDRAS[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.SDCAS[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.SDWE[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.DQSL[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.DQSU[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.NDQSL[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.NDQSU[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.SDDML[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.SDDMU[0]
@22
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.SDD[15:0]
@28
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.SDODT[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.SDRST[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.mclk[0]
@22
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd0_addr[9:0]
@28
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd0_clk[0]
@22
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd0_data[31:0]
@28
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd0_we[0]
@22
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd_addr[9:0]
@800028
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd_busy[2:0]
@28
(0)ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd_busy[2:0]
(1)ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd_busy[2:0]
(2)ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd_busy[2:0]
@1001200
-group_end
@28
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd_fetch[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.pause[0]
@22
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.pause_cntr[5:0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.pause_len[5:0]
@28
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_nop[0]
@22
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.phy_cmd_word[31:0]
@28
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.ren0[0]
@22
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.run_addr[10:0]
@28
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.run_busy[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.run_done[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.run_seq[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.run_seq_d[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.sequence_done[0]
@1000200
-ddr_sequencer_i_selected
@c00200
-ddrc_test01
@28
......@@ -1205,7 +1281,6 @@ ddrc_test01_testbench.ddrc_test01_i.axiwr_bram_wstb[3:0]
ddrc_test01_testbench.ddrc_test01_i.axiwr_dev_busy[0]
ddrc_test01_testbench.ddrc_test01_i.axiwr_dev_ready[0]
ddrc_test01_testbench.ddrc_test01_i.axiwr_start_burst[0]
ddrc_test01_testbench.ddrc_test01_i.cmda_tri[0]
@22
ddrc_test01_testbench.ddrc_test01_i.dly_addr[6:0]
ddrc_test01_testbench.ddrc_test01_i.dly_data[7:0]
......@@ -1348,7 +1423,7 @@ ddrc_test01_testbench.ddrc_test01_i.axibram_write_i.wresp_i.data_out[13:0]
ddrc_test01_testbench.ddrc_test01_i.axibram_write_i.wresp_i.rst[0]
@1401200
-wresp_i
@800200
@c00200
-waddr_i
@28
ddrc_test01_testbench.ddrc_test01_i.axibram_write_i.waddr_i.clk[0]
......@@ -1374,7 +1449,7 @@ ddrc_test01_testbench.ddrc_test01_i.axibram_write_i.waddr_i.wa[3:0]
@28
ddrc_test01_testbench.ddrc_test01_i.axibram_write_i.waddr_i.we[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_write_i.waddr_i.wem[0]
@1000200
@1401200
-waddr_i
@c00200
-wdata_i
......@@ -1410,5 +1485,132 @@ ddrc_test01_testbench.ddrc_test01_i.axibram_write_i.wdata_i.we[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_write_i.wdata_i.wem[0]
@1401200
-wdata_i
@c00200
-axibram_read_i
@28
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.aclk[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.ar_half_full[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.ar_nempty[0]
@22
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.araddr[31:0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.araddr_out[12:0]
@28
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.arburst[1:0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.arburst_out[1:0]
@22
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.arid[11:0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.arid_out[11:0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.arlen[3:0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.arlen_out[3:0]
@28
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.arready[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.arsize[1:0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.arsize_out[1:0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.arvalid[0]
@22
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.bram_raddr[12:0]
@28
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.bram_rclk[0]
@22
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.bram_rdata[31:0]
@28
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.bram_reg_re_0[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.bram_reg_re_w[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.bram_regen[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.bram_ren[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.dev_ready[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.last_in_burst_0[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.last_in_burst_1[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.last_in_burst_d_w[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.last_in_burst_w[0]
@22
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.next_rd_address_w[12:0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.pre_araddr[12:0]
@28
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.pre_last_in_burst_r[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.pre_left_zero_w[0]
@22
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.pre_rid0[11:0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.pre_rid[11:0]
@28
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.pre_rvalid_w[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.rburst[1:0]
@22
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.rdata[31:0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.read_address[12:0]
@28
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.read_in_progress[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.read_in_progress_d[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.read_in_progress_d_w[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.read_in_progress_or[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.read_in_progress_w[0]
@22
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.read_left[3:0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.rid[11:0]
@28
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.rlast[0]
@22
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.rlen[3:0]
@28
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.rready[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.rresp[1:0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.rst[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.rvalid[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.start_burst[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.start_read_burst_0[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.start_read_burst_1[0]
ddrc_test01_testbench.ddrc_test01_i.axibram_read_i.start_read_burst_w[0]
@1401200
-axibram_read_i
@22
ddrc_test01_testbench.registered_rdata[31:0]
@28
ddrc_test01_testbench.ddrc_test01_i.ddrc_status_i.busy[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_status_i.locked[0]
@22
ddrc_test01_testbench.ddrc_test01_i.ddrc_status_i.ps_out[7:0]
@28
ddrc_test01_testbench.ddrc_test01_i.ddrc_status_i.ps_rdy[0]
@22
ddrc_test01_testbench.ddrc_test01_i.ddrc_status_i.rdata[31:0]
@28
ddrc_test01_testbench.ddrc_test01_i.ddrc_status_i.run_busy[0]
ddrc_test01_testbench.ddrc_test01_i.select_port0[0]
ddrc_test01_testbench.ddrc_test01_i.select_status[0]
@22
ddrc_test01_testbench.ddrc_test01_i.axird_pre_araddr[12:0]
@28
ddrc_test01_testbench.ddrc_test01_i.axird_start_burst[0]
@22
ddrc_test01_testbench.GLOBAL_WRITE_ID[11:0]
@c00200
-cmd0_buf_i
@22
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd0_buf_i.data_in[31:0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd0_buf_i.data_out[31:0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd0_buf_i.raddr[9:0]
@28
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd0_buf_i.rclk[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd0_buf_i.regen[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd0_buf_i.ren[0]
@22
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd0_buf_i.waddr[9:0]
@28
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd0_buf_i.wclk[0]
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd0_buf_i.we[0]
@22
ddrc_test01_testbench.ddrc_test01_i.ddrc_sequencer_i.cmd0_buf_i.web[3:0]
@1401200
-cmd0_buf_i
@22
ddrc_test01_testbench.set_mrs.data[31:0]
ddrc_test01_testbench.set_mrs.cmd_addr[31:0]
ddrc_test01_testbench.set_mrs.data[31:0]
ddrc_test01_testbench.set_mrs.mr0[17:0]
ddrc_test01_testbench.set_mrs.mr1[17:0]
ddrc_test01_testbench.set_mrs.mr2[17:0]
ddrc_test01_testbench.set_mrs.mr3[17:0]
@28
ddrc_test01_testbench.set_mrs.reset_dll[0]
[pattern_trace] 1
[pattern_trace] 0
ddrc_test01_testbench.tf
View file @ 3d67d687
......@@ -72,14 +72,19 @@ module ddrc_test01_testbench #(
parameter PAGES_REL_MASK = 'h3ff, // address mask to set DQM and DQS patterns
parameter CMDA_EN_REL = 'h022, // address to enable('h823)/disable('h822) command/address outputs
parameter CMDA_EN_REL_MASK = 'h3fe, // address mask for command/address outputs
parameter EXTRA_REL = 'h024, // address to set extra parameters (currently just inv_clk_div)
parameter SDRST_ACT_REL = 'h024, // address to activate('h825)/deactivate('h8242) active-low reset signal to DDR3 memory
parameter SDRST_ACT_REL_MASK = 'h3fe, // address mask for reset DDR3
parameter CKE_EN_REL = 'h026, // address to enable('h827)/disable('h826) CKE signal to memory
parameter CKE_EN_REL_MASK = 'h3fe, // address mask for command/address outputs
parameter EXTRA_REL = 'h028, // address to set extra parameters (currently just inv_clk_div)
parameter EXTRA_REL_MASK = 'h3ff, // address mask for extra parameters
// simulation-specific parameters
parameter integer AXI_RDADDR_LATENCY=2,
parameter integer AXI_WRADDR_LATENCY=4,
parameter integer AXI_WRDATA_LATENCY=1,
parameter integer AXI_TASK_HOLD=1.0
parameter integer AXI_TASK_HOLD=1.0,
parameter integer ADDRESS_NUMBER=15
)();
`ifdef IVERILOG
// $display("IVERILOG is defined");
......@@ -90,14 +95,25 @@ module ddrc_test01_testbench #(
`endif
`define DEBUG_WR_SINGLE 1
// DDR3 signals
// SuppressWarnings VEditor
wire SDRST;
// SuppressWarnings VEditor
wire SDCLK; // output
// SuppressWarnings VEditor
wire SDNCLK; // output
wire [14:0] SDA; // output[14:0]
// SuppressWarnings VEditor
wire [ADDRESS_NUMBER-1:0] SDA; // output[14:0]
// SuppressWarnings VEditor
wire [ 2:0] SDBA; // output[2:0]
// SuppressWarnings VEditor
wire SDWE; // output
// SuppressWarnings VEditor
wire SDRAS; // output
// SuppressWarnings VEditor
wire SDCAS; // output
// SuppressWarnings VEditor
wire SDCKE; // output
// SuppressWarnings VEditor
wire SDODT; // output
wire [15:0] SDD; // inout[15:0]
wire SDDML; // inout
......@@ -125,14 +141,18 @@ module ddrc_test01_testbench #(
reg [ 3:0] WSTRB_IN_r;
reg WLAST_IN_r;
wire [ 9:0] SIMUL_AXI_ADDR_W;
// SuppressWarnings VEditor : assigned in $readmem() system task
wire [ 9:0] SIMUL_AXI_ADDR_W;
// SuppressWarnings VEditor
wire SIMUL_AXI_MISMATCH;
// SuppressWarnings VEditor
reg [31:0] SIMUL_AXI_READ;
// SuppressWarnings VEditor
reg [ 9:0] SIMUL_AXI_ADDR;
// SuppressWarnings VEditor
reg SIMUL_AXI_FULL; // some data available
reg [31:0] registered_rdata;
reg CLK;
reg RST;
......@@ -172,7 +192,7 @@ module ddrc_test01_testbench #(
wire [3:0] arlen;
wire [2:0] arsize;
wire [1:0] arburst;
// SuppressWarnings VEditor : assigned in $readmem() system task
// SuppressWarnings VEditor : assigned in $readmem(14) system task
wire [3:0] arcache;
// SuppressWarnings VEditor : assigned in $readmem() system task
wire [2:0] arprot;
......@@ -216,7 +236,6 @@ module ddrc_test01_testbench #(
wire bready;
always #(CLKIN_PERIOD/2) CLK <= ~CLK;
initial begin
`ifdef IVERILOG
$display("IVERILOG is defined");
......@@ -248,6 +267,26 @@ always #(CLKIN_PERIOD/2) CLK <= ~CLK;
// test_axi_1;
// read memory
// test_axi_2;
read_status; // ps ready goes false with some delay
// read_status;
wait_phase_shifter_ready;
// repeat (40) begin
// read_status;
// end
enable_cmda(1);
repeat (16) @(posedge CLK) ;
activate_sdrst(0); // was enabled at system reset
repeat (16) @(posedge CLK) ;
enable_cke(1);
repeat (16) @(posedge CLK) ;
set_mrs(1);
#100;
// $finish;
run_sequence(0);
//#100;
$display("finish testbench 0");
$finish;
repeat (512) @(posedge CLK) ;
#100;
......@@ -368,12 +407,17 @@ assign bresp= ddrc_test01_i.ps7_i.MAXIGP0BRESP;
.PAGES_REL_MASK (PAGES_REL_MASK),
.CMDA_EN_REL (CMDA_EN_REL),
.CMDA_EN_REL_MASK (CMDA_EN_REL_MASK),
.SDRST_ACT_REL (SDRST_ACT_REL),
.SDRST_ACT_REL_MASK (SDRST_ACT_REL_MASK),
.CKE_EN_REL (CKE_EN_REL),
.CKE_EN_REL_MASK (CKE_EN_REL_MASK),
.EXTRA_REL (EXTRA_REL),
.EXTRA_REL_MASK (EXTRA_REL_MASK)
) ddrc_test01_i (
.SDRST (SDRST), // DDR3 reset (active low)
.SDCLK (SDCLK), // output
.SDNCLK (SDNCLK), // output
.SDNCLK (SDNCLK), // outputread_and_wait(BASEADDR_STATUS)
.SDA (SDA[14:0]), // output[14:0]
.SDBA (SDBA[2:0]), // output[2:0]
.SDWE (SDWE), // output
......@@ -492,7 +536,7 @@ simul_axi_slow_ready simul_axi_slow_ready_write_resp_i(
.clk(CLK),
.reset(RST), //input reset,
.delay(B_LAG), //input [3:0] delay,
.valid(bvalid), // input valid,
.valid(bvalid), // input ADDRESS_NUMBER+2:0 valid,
.ready(bready) //output ready
);
......@@ -516,7 +560,10 @@ simul_axi_read simul_axi_read_i(
// Tasks
// top simulation tasks
// base addresses
// SuppressWarnings VEditor
localparam BASEADDR_PORT0_RD = PORT0_RD_ADDR << 2; // 'h0000 << 2
// SuppressWarnings VEditor
localparam BASEADDR_PORT1_WR = PORT1_WR_ADDR << 2; // 'h0000 << 2 = 'h000
localparam BASEADDR_CMD0 = CMD0_ADDR << 2; // 'h0800 << 2 = 'h2000
// localparam BASEADDR_CTRL = CONTROL_ADDR << 2;
......@@ -525,14 +572,21 @@ simul_axi_read simul_axi_read_i(
localparam BASEADDR_DLY_LD = BASEADDR_CTRL | (DLY_LD_REL <<2); // 'h080, address to generate delay load
localparam BASEADDR_DLY_SET = BASEADDR_CTRL | (DLY_SET_REL<<2); // 'h070, address to generate delay set
localparam BASEADDR_RUN_CHN = BASEADDR_CTRL | (RUN_CHN_REL<<2); // 'h000, address to set sequnecer channel and run (4 LSB-s - channel)
// SuppressWarnings VEditor
localparam BASEADDR_PATTERNS =BASEADDR_CTRL | (PATTERNS_REL<<2); // 'h020, address to set DQM and DQS patterns (16'h0055)
// SuppressWarnings VEditor
localparam BASEADDR_PAGES = BASEADDR_CTRL | (PAGES_REL<<2); // 'h021, address to set buffer pages {port1_page[1:0],port1_int_page[1:0],port0_page[1:0],port0_int_page[1:0]}
localparam BASEADDR_CMDA_EN = BASEADDR_CTRL | (CMDA_EN_REL<<2); // 'h022, address to enable('h823)/disable('h822) command/address outputs
localparam BASEADDR_EXTRA = BASEADDR_CTRL | (EXTRA_REL<<2); // 'h024, address to set extra parameters (currently just inv_clk_div)
localparam BASEADDR_SDRST_ACT = BASEADDR_CTRL | (SDRST_ACT_REL<<2); // address to activate('h825)/deactivate('h824) active-low reset signal to DDR3 memory
localparam BASEADDR_CKE_EN = BASEADDR_CTRL | (CKE_EN_REL<<2); //
// SuppressWarnings VEditor
localparam BASEADDR_EXTRA = BASEADDR_CTRL | (EXTRA_REL<<2); // 'h028, address to set extra parameters (currently just inv_clk_div)
localparam BASEADDRESS_LANE0 = BASEADDR_DLY_LD;
localparam BASEADDRESS_LANE1 = BASEADDR_DLY_LD+('h20<<2);
localparam BASEADDRESS_CMDA = BASEADDR_DLY_LD+('h40<<2);
localparam BASEADDRESS_PHASE = BASEADDR_DLY_LD+('h60<<2);
localparam PSHIFTER_RDY_MASK = 'h100;
localparam DLY_LANE0= 152'h74737271706f6e6d6c7574737271706f6e6d6c; // idelay dqs, idelay dq[7:0, odelay dqm, odelay ddqs, odelay dq[7:0]
......@@ -541,6 +595,390 @@ simul_axi_read simul_axi_read_i(
// localparam DLY_PHASE= 8'h25; // mmcm fine phase shift
localparam DLY_PHASE= 8'hdb; // mmcm fine phase shift
task run_sequence;
input [7:0] start_addr; // word
// BASEADDR_RUN_CHN
begin
$display("run_sequence 0 @ %t",$time);
axi_write_single(BASEADDR_RUN_CHN, {24'h0,start_addr});
$display("run_sequence 1 @ %t",$time);
#1000; // 90; // 92 - does not work ?
$display("run_sequence 2 @ %t",$time);
end
endtask
task enable_cmda;
input en;
begin
if (en)
axi_write_single(BASEADDR_CMDA_EN+4, 0);
else
axi_write_single(BASEADDR_CMDA_EN, 0);
end
endtask
task enable_cke;
input en;
begin
if (en)
axi_write_single(BASEADDR_CKE_EN+4, 0);
else
axi_write_single(BASEADDR_CKE_EN, 0);
//BASEADDR_CMDA_EN
end
endtask
task activate_sdrst;
input en;
begin
if (en)
axi_write_single(BASEADDR_SDRST_ACT+4, 0);
else
axi_write_single(BASEADDR_SDRST_ACT, 0);
//BASEADDR_CMDA_EN
end
endtask
task set_mrs;
input reset_dll;
// reg [ADDRESS_NUMBER+2:0] mr0;
// reg [ADDRESS_NUMBER+2:0] mr1;
// reg [ADDRESS_NUMBER+2:0] mr2;
// reg [ADDRESS_NUMBER+2:0] mr3;
reg [17:0] mr0;
reg [17:0] mr1;
reg [17:0] mr2;
reg [17:0] mr3;
reg [31:0] cmd_addr;
reg [31:0] data;
begin
mr0 <= ddr3_mr0 (
1'h0, // pd; // precharge power down 0 - dll off (slow exit), 1 - dll on (fast exit)
3'h2, // [2:0] wr; // write recovery (encode ceil(tWR/tCK)) // 3'b010: 6
reset_dll, // dll_rst; // 1 - dll reset (self clearing bit)
4'h2, // [3:0] cl; // CAS latency: // 0010: 5
1'h0, // bt; // read burst type: 0 sequential (nibble), 1 - interleaverun_seqd
2'h0); // [1:0] bl; // burst length: // 2'b00 - fixed BL8
mr1 <= ddr3_mr1 (
1'h0, // qoff; // output enable: 0 - DQ, DQS operate in normal mode, 1 - DQ, DQS are disabled
1'h0, // tdqs; // termination data strobe (for x8 devices) 0 - disabled, 1 - enabled
3'h2, // [2:0] rtt; // on-die termination resistance: // 3'b010 - RZQ/2 (120 Ohm)
1'h0, // wlev; // write leveling
2'h0, // ods; // output drive strength: // 2'b00 - RZQ/6 - 40 Ohm
2'h0, // [1:0] al; // additive latency: 2'b00 - disabled (AL=0)
1'b0); // dll; // 0 - DLL enabled (normal), 1 - DLL disabled
mr2 <= ddr3_mr2 (
2'h0, // [1:0] rtt_wr; // Dynamic ODT : // 2'b00 - disabled, 2'b01 - RZQ/4 = 60 Ohm, 2'b10 - RZQ/2 = 120 Ohm
1'h0, // srt; // Self-refresh temperature 0 - normal (0-85C), 1 - extended (<=95C)
1'h0, // asr; // Auto self-refresh 0 - disabled (manual), 1 - enabled (auto)
3'h0); // [2:0] cwl; // CAS write latency:3'b000 5CK (tCK >= 2.5ns), 3'b001 6CK (1.875ns <= tCK < 2.5ns)
mr3 <= ddr3_mr3 (
1'h0, // mpr; // MPR mode: 0 - normal, 1 - dataflow from MPR
2'h0); // [1:0] mpr_rf; // MPR read function: 2'b00: predefined pattern 0101...
cmd_addr <= BASEADDR_CMD0;
wait (~CLK);
data <= encode_seq_word(
mr2[14:0], // [14:0] phy_addr_in;
mr2[17:15], // [ 2:0] phy_bank_in; //TODO: debug!
3'b111, // [ 2:0] phy_rcw_in; // {ras,cas,we}, positive
1'b0, // phy_odt_in; // may be optimized?
1'b1, // phy_cke_in; // may be optimized?
1'b0, // phy_sel_in; // first/second half-cycle, oter will be nop (cke+odt applicable to both)
1'b0, // phy_dq_en_in;
1'b0, // phy_dqs_ddrc_sequenceren_in;
1'b0, // phy_dci_en_in; // DCI disable, both DQ and DQS lines (internal logic and timing sequencer for 0->1 and 1->0)
1'b0, // phy_buf_wr; // connect to external buffer
1'b0); // phy_buf_rd; // connect to external buffer
wait (CLK);
axi_write_single(cmd_addr, data);
cmd_addr <= cmd_addr + 4;
wait (~CLK);
// data <= encode_seq_skip(2,0);
data <= encode_seq_skip(1,0); // 6 cycles between mrs commands
wait (CLK);
axi_write_single(cmd_addr, data);
cmd_addr <= cmd_addr + 4;
wait (~CLK);
data <= encode_seq_word(
mr3[14:0], // [14:0] phy_addr_in;
mr3[17:15], // [ 2:0] phy_bank_in; //TODO: debug!
3'b111, // [ 2:0] phy_rcw_in; // {ras,cas,we}, positive
1'b0, // phy_odt_in; // may be optimized?
1'b1, // phy_cke_in; // may be optimized?
1'b0, // phy_sel_in; // first/second half-cycle, other will be nop (cke+odt applicable to both)
1'b0, // phy_dq_eddrc_sequencern_in;
1'b0, // phy_dqs_en_in;
1'b0, // phy_dci_en_in; // DCI disable, both DQ and DQS lines (internal logic and timing sequencer for 0->1 and 1->0)
1'b0, // phy_buf_wr; // connect to external buffer
1'b0); // phy_buf_rd; // connect to external buffer
wait (CLK);
axi_write_single(cmd_addr, data);
cmd_addr <= cmd_addr + 4;
wait (~CLK);
// data <= encode_seq_skip(2,0); // TODO: function - does not check arguments number
data <= encode_seq_skip(0,0); // 5 cycles between mrs commands (next command has phy_sel_in == 1)
wait (CLK);
axi_write_single(cmd_addr, data);
cmd_addr <= cmd_addr + 4;
wait (~CLK);
data <= encode_seq_word(
mr1[14:0], // [14:0] phy_addr_in;
mr1[17:15], // [ 2:0] phy_bank_in; //TODO: debug!
3'b111, // [ 2:0] phy_rcw_in; // {ras,cas,we}, positive
1'b0, // phy_odt_in; // may be optimized?
1'b1, // phy_cke_in; // may be optimized?
1'b1, // phy_sel_in == 1 (test); // first/second half-cycle,
1'b0, // phy_dq_en_in;
1'b0, // phy_dqs_en_in;
1'b0, // phy_dci_en_in; // DCI disable, both DQ and DQS lines (internal logic and timing sequencer for 0->1 and 1->0)
1'b0, // phy_buf_wr; // connect to external buffer
1'b0); // phy_buf_rd; // connect to external buffer
wait (CLK);
axi_write_single(cmd_addr, data);
cmd_addr <= cmd_addr + 4;
wait (~CLK);
data <= encode_seq_skip(2,0); // 7 cycles between mrs commands ( prev. command had phy_sel_in == 1)
wait (CLK);
axi_write_single(cmd_addr, data);
cmd_addr <= cmd_addr + 4;
wait (~CLK);
data <= encode_seq_word(
mr0[14:0], // [14:0] phy_addr_in;
mr0[17:15], // [ 2:0] phy_bank_in; //TODO: debug!
3'b111, // [ 2:0] phy_rcw_in; // {ras,cas,we}, positive
1'b0, // phy_odt_in; // may be optimized?
1'b1, // phy_cke_in; // may be optimized?
1'b0, // phy_sel_in; // first/second half-cycle, other will be nop (cke+odt applicable to both)
1'b0, // phy_dq_en_in;
1'b0, // phy_dqs_en_in;
1'b0, // phy_dci_en_in; // DCI disable, both DQ and DQS lines (internal logic and timing sequencer for 0->1 and 1->0)
1'b0, // phy_buf_wr; // connect to external buffer
1'b0); // phy_buf_rd; // connect to external buffer
wait (CLK);
axi_write_single(cmd_addr, data);
cmd_addr <= cmd_addr + 4;
wait (~CLK);
data <= encode_seq_skip(10,1);
wait (CLK);
axi_write_single(cmd_addr, data);
cmd_addr <= cmd_addr + 4;
// TODO: Function of function does not work - debug
/*
axi_write_single(cmd_addr,
encode_seq_word(
mr2[14:0], // [14:0] phy_addr_in;
mr2[17:15], // [ 2:0] phy_bank_in; //TODO: debug!
3'b111, // [ 2:0] phy_rcw_in; // {ras,cas,we}, positive
1'b0, // phy_odt_in; // may be optimized?
1'b1, // phy_cke_in; // may be optimized?
1'b0, // phy_sel_in; // first/second half-cycle, other will be nop (cke+odt applicable to both)
1'b0, // phy_dq_en_in;
1'b0, // phy_dqs_en_in;
1'b0, // phy_dci_en_in; // DCI disable, both DQ and DQS lines (internal logic and timing sequencer for 0->1 and 1->0)
1'b0, // phy_buf_wr; // connect to external buffer
1'b0)); // phy_buf_rd; // connect to external buffer
*/
end
endtask
function [31:0] encode_seq_word;
input [14:0] phy_addr_in; // also provides pause length when the command is NOP
input [ 2:0] phy_bank_in;
input [ 2:0] phy_rcw_in; // {ras,cas,we}
input phy_odt_in; // may be optimized?
input phy_cke_inv; // invert CKE
input phy_sel_in; // fitst/second half-cycle, oter will be nop (cke+odt applicable to both)
input phy_dq_en_in;
input phy_dqs_en_in;
input phy_dci_en_in; // DCI disable, both DQ and DQS lines (internal logic and timing sequencer for 0->1 and 1->0)
input phy_buf_wr; // connect to external buffer
input phy_buf_rd; // connect to external buffer
begin
encode_seq_word={
phy_addr_in[14:0],
phy_bank_in[2:0],
phy_rcw_in[2:0], // {ras,cas,we}, positive logic (3'b0 - NOP)
phy_odt_in, // may be optimized?
phy_cke_inv, // invert CKE
phy_sel_in, // first/second half-cycle, other will be nop (cke+odt applicable to both)
phy_dq_en_in, //phy_dq_tri_in, // tristate DQ lines (internal timing sequencer for 0->1 and 1->0)
phy_dqs_en_in, //phy_dqs_tri_in, // tristate DQS lines (internal timing sequencer for 0->1 and 1->0)
phy_dci_en_in, //phy_dci_in, // DCI disable, both DQ and DQS lines (internal logic and timing sequencer for 0->1 and 1->0)
phy_buf_wr, // connect to external buffer (but only if not paused)
phy_buf_rd, // connect to external buffer (but only if not paused)
3'h0 // Reserved for future use
};
end
endfunction
// parameter CMD_PAUSE_BITS= 6, // numer of (address) bits to encode pause
// parameter CMD_DONE_BIT= 6 // bit number (address) to signal sequence done
function [31:0] encode_seq_skip;
input [CMD_PAUSE_BITS-1:0] skip;
input done;
begin
encode_seq_skip={
{14-CMD_DONE_BIT{1'b0}},
done,
skip[CMD_PAUSE_BITS-1:0],
3'b0, //phy_bank_in[2:0],
3'b0, // phy_rcw_in[2:0], // {ras,cas,we}
1'b0, // phy_odt_in, // may be optimized?
1'b0, // phy_cke_in, // may be optimized?
1'b0, // phy_sel_in, // fitst/second half-cycle, oter will be nop (cke+odt applicable to both)
1'b0, // phy_dq_en_in, //phy_dq_tri_in, // tristate DQ lines (internal timing sequencer for 0->1 and 1->0)
1'b0, // phy_dqs_en_in, //phy_dqs_tri_in, // tristate DQS lines (internal timing sequencer for 0->1 and 1->0)
1'b0, // phy_dci_en_in, //phy_dci_in, // DCI disable, both DQ and DQS lines (internal logic and timing sequencer for 0->1 and 1->0)
1'b0, // phy_buf_wr, // connect to external buffer (but only if not paused)
1'b0, // phy_buf_rd, // connect to external buffer (but only if not paused)
3'h0 // Reserved for future use
};
end
endfunction
function [ADDRESS_NUMBER+2:0] ddr3_mr0;
input pd; // precharge power down 0 - dll off (slow exit), 1 - dll on (fast exit)
input [2:0] wr; // write recovery:
// 3'b000: 16
// 3'b001: 5
// 3'b010: 6
// 3'b011: 7
// 3'b100: 8
// 3'b101: 10
// 3'b110: 12
// 3'b111: 14
input dll_rst; // 1 - dll reset (self clearing bit)
input [3:0] cl; // CAS latency:
// 0000: reserved
// 0010: 5
// 0100: 6
// 0110: 7
// 1000: 8
// 1010: 9
// 1100: 10
// 1110: 11
// 0001: 12
// 0011: 13
// 0101: 14
input bt; // read burst type: 0 sequential (nibble), 1 - interleaved
input [1:0] bl; // burst length:
// 2'b00 - fixed BL8
// 2'b01 - 4 or 8 on-the-fly by A12
// 2'b10 - fixed BL4 (chop)
// 2'b11 - reserved
begin
ddr3_mr0 = {
3'b0,
{ADDRESS_NUMBER-13{1'b0}},
pd, // MR0.12
wr, // MR0.11_9
dll_rst, // MR0.8
1'b0, // MR0.7
cl[3:1], // MR0.6_4
bt, // MR0.3
cl[0], // MR0.2
bl[1:0]}; // MR0.1_0
end
endfunction
function [ADDRESS_NUMBER+2:0] ddr3_mr1;
input qoff; // output enable: 0 - DQ, DQS operate in normal mode, 1 - DQ, DQS are disabled
input tdqs; // termination data strobe (for x8 devices) 0 - disabled, 1 - enabled
input [2:0] rtt; // on-die termination resistance:
// 3'b000 - disabled
// 3'b001 - RZQ/4 (60 Ohm)
// 3'b010 - RZQ/2 (120 Ohm)
// 3'b011 - RZQ/6 (40 Ohm)
// 3'b100 - RZQ/12(20 Ohm)
// 3'b101 - RZQ/8 (30 Ohm)
// 3'b11x - reserved
input wlev; // write leveling
input [1:0] ods; // output drive strength:
// 2'b00 - RZQ/6 - 40 Ohm
// 2'b01 - RZQ/7 - 34 Ohm
// 2'b1x - reserved
input [1:0] al; // additive latency:
// 2'b00 - disabled (AL=0)
// 2'b01 - AL=CL-1;
// 2'b10 - AL=CL-2
// 2'b11 - reserved
input dll; // 0 - DLL enabled (normal), 1 - DLL disabled
begin
ddr3_mr1 = {
3'h1,
{ADDRESS_NUMBER-13{1'b0}},
qoff, // MR1.12
tdqs, // MR1.11
1'b0, // MR1.10
rtt[2], // MR1.9
1'b0, // MR1.8
wlev, // MR1.7
rtt[1], // MR1.6
ods[1], // MR1.5
al[1:0], // MR1.4_3
rtt[0], // MR1.2
ods[0], // MR1.1
dll}; // MR1.0
end
endfunction
function [ADDRESS_NUMBER+2:0] ddr3_mr2;
input [1:0] rtt_wr; // Dynamic ODT :
// 2'b00 - disabled
// 2'b01 - RZQ/4 = 60 Ohm
// 2'b10 - RZQ/2 = 120 Ohm
// 2'b11 - reserved
input srt; // Self-refresh temperature 0 - normal (0-85C), 1 - extended (<=95C)
input asr; // Auto self-refresh 0 - disabled (manual), 1 - enabled (auto)
input [2:0] cwl; // CAS write latency:
// 3'b000 5CK ( tCK >= 2.5ns)
// 3'b001 6CK (1.875ns <= tCK < 2.5ns)
// 3'b010 7CK (1.5ns <= tCK < 1.875ns)
// 3'b011 8CK (1.25ns <= tCK < 1.5ns)
// 3'b100 9CK (1.071ns <= tCK < 1.25ns)
// 3'b101 10CK (0.938ns <= tCK < 1.071ns)
// 3'b11x reserved
begin
ddr3_mr2 = {
3'h2,
{ADDRESS_NUMBER-11{1'b0}},
rtt_wr[1:0], // MR2.10_9
1'b0, // MR2.8
srt, // MR2.7
asr, // MR2.6
cwl[2:0], // MR2.5_3
3'b0}; // MR2.2_0
end
endfunction
function [ADDRESS_NUMBER+2:0] ddr3_mr3;
input mpr; // MPR mode: 0 - normal, 1 - dataflow from MPR
input [1:0] mpr_rf; // MPR read function:
// 2'b00: predefined pattern 0101...
// 2'b1x, 2'bx1 - reserved
begin
ddr3_mr3 = {
3'h3,
{ADDRESS_NUMBER-3{1'b0}},
mpr, // MR3.2
mpr_rf[1:0]}; // MR3.1_0
end
endfunction
reg [7:0] target_phase=0;
// initialize delays
task axi_set_delays;
......@@ -565,11 +1003,60 @@ simul_axi_read simul_axi_read_i(
input [PHASE_WIDTH-1:0] phase;
begin
axi_write_single(BASEADDRESS_PHASE, {{(32-PHASE_WIDTH){1'b0}},phase});
target_phase <= phase;
end
endtask
/*
assign rdata={21'b0,run_busy,locked,ps_rdy,ps_out[7:0]};
*/
task wait_phase_shifter_ready;
begin
read_status;
while (((registered_rdata & PSHIFTER_RDY_MASK) == 0) || (((registered_rdata ^ {24'h0,target_phase}) & 'hff) != 0)) read_status;
end
endtask
task read_status;
begin
read_and_wait(BASEADDR_STATUS);
end
endtask
/*
// read memory
task test_axi_2;
integer i; //,j;
begin
axi_set_rd_lag(0);
for (i=0;i<1024;i=i+16) begin
axi_read_addr(
i, // id
i<<2, // addr
4'hf, // len
1 // burst type - increment
);
if ((i==256) || (i==384)) begin
repeat (512) @(posedge CLK) ;
end
if (( i & 'h7f)==0) begin
if (( i & 'h80)==0) axi_set_rd_lag(1);
else axi_set_rd_lag(0);
end
end
// assign aaa=bbb; // task internals were not parsed
end
endtask task read_status;
begin
read_and_wait(BASEADDR_STATUS);
end
endtask
*/
// Low-level tasks
task axi_set_rd_lag;
input [3:0] lag;
begin
......@@ -587,6 +1074,23 @@ simul_axi_read simul_axi_read_i(
endtask
reg [11:0] GLOBAL_WRITE_ID=0;
reg [11:0] GLOBAL_READ_ID=0;
task read_and_wait;
input [31:0] address;
begin
axi_read_addr(
GLOBAL_READ_ID, // id
address & 32'hfffffffc, // addr
4'h0, // len - single
1 // burst type - increment
);
GLOBAL_READ_ID <= GLOBAL_READ_ID+1;
wait (!CLK && rvalid && rready);
wait (CLK);
registered_rdata <= rdata;
end
endtask
task axi_write_single; // address in bytes, not words
input [31:0] address;
......@@ -681,7 +1185,7 @@ simul_axi_read simul_axi_read_i(
#0.1;
end
endtask
// SuppressWarnings VEditor - not yet used
task axi_write_data;
input [11:0] id;
input [31:0] data;
......@@ -704,7 +1208,10 @@ simul_axi_read simul_axi_read_i(
end
endtask
task axi_read_addr;
task axi_read_addr;`ifndef IVERILOG
(* dont_touch = "true" *)
`endif
input [11:0] id;
input [31:0] addr;
input [ 3:0] len;
......
phy/cmd_addr.v
View file @ 3d67d687
......@@ -56,7 +56,7 @@ reg [2*ADDRESS_NUMBER-1:0] in_a_r=0;
reg [5:0] in_ba_r=0;
reg [1:0] in_we_r=2'h3, in_ras_r=2'h3, in_cas_r=2'h3, in_cke_r=2'h3, in_odt_r=2'h0;
//reg [1:0] in_tri_r=2'h0; // or tri-state on reset?
reg in_tri_r=1'b0; // or tri-state on reset?
reg in_tri_r=1'b1; // or tri-state on reset?
// Preventing register duplication
(* keep = "true" *) reg [7:0] dly_data_r=0;
(* keep = "true" *) reg set_r=0;
......@@ -78,7 +78,7 @@ always @ (posedge clk_div or posedge rst) begin
in_a_r <= 0; in_ba_r <= 6'b0;
in_we_r <= 2'h3; in_ras_r <= 2'h3; in_cas_r <= 2'h3; in_cke_r <= 2'h3; in_odt_r <= 2'h0;
// in_tri_r <= 2'h0; // or tri-state on reset?
in_tri_r <= 1'b0; // or tri-state on reset?
in_tri_r <= 1'b1; // or tri-state on reset?
dly_data_r<=8'b0;set_r<=1'b0;
ld_dly_cmd <= 8'b0; ld_dly_addr <= 0;
end else begin
......
phy/ddrc_sequencer.v
View file @ 3d67d687
......@@ -47,6 +47,7 @@ module ddrc_sequencer #(
parameter CMD_DONE_BIT= 6
)(
// DDR3 interface
output SDRST, // DDR3 reset (active low)
output SDCLK, // DDR3 clock differential output, positive
output SDNCLK,// DDR3 clock differential output, negative
output [ADDRESS_NUMBER-1:0] SDA, // output address ports (14:0) for 4Gb device
......@@ -81,7 +82,7 @@ module ddrc_sequencer #(
// Controller run interface, posedge mclk
input [10:0] run_addr, // controller sequencer start address (0..11'h3ff - cmd0, 11'h400..11'h7ff - cmd1)
input [3:0] run_chn, // data channel to use
input run_seq, // start controller sequence
input run_seq, // start controller sequence (will and with !ddr_rst for stable mclk)
output run_done, // controller sequence finished
output run_busy, // controller sequence in progress
// inteface to control I/O delays and mmcm
......@@ -108,7 +109,9 @@ module ddrc_sequencer #(
input [7:0] port1_addr,
input [31:0] port1_data,
// extras
input cmda_tri, // tristate command and address lines // not likely to be used
input cmda_en, // enable (!tristate) command and address lines // not likely to be used
input ddr_rst, // generate reset to DDR3 memory (active high)
input ddr_cke, // DDR clock enable , XOR-ed with command bit
input inv_clk_div,
input [7:0] dqs_pattern, // 8'h55
input [7:0] dqm_pattern // 8'h00
......@@ -153,14 +156,16 @@ module ddrc_sequencer #(
assign run_done=sequence_done;
assign run_busy=cmd_busy[0]; //earliest
assign pause=cmd_fetch? (phy_cmd_nop && (pause_len != 0)): (cmd_busy[2] && (pause_cntr[CMD_PAUSE_BITS-1:1]!=0));
assign phy_cmd_word = phy_cmd_word?phy_cmd1_word:phy_cmd0_word;
/// debugging
assign phy_cmd_word = cmd_sel?phy_cmd1_word:phy_cmd0_word; // TODO: hangs even with 0-s in phy_cmd
/// assign phy_cmd_word = phy_cmd_word?0:0;
assign buf_rdata[63:0] = ({64{buf_sel_1hot[1]}} & buf1_rdata[63:0]); // ORR with other read channels terms
assign buf_rdata[63:0] = ({64{buf_sel_1hot[1]}} & buf1_rdata[63:0]); // ORed with other read channels terms
always @ (posedge mclk or posedge rst) begin
if (rst) cmd_busy <= 0;
else if (sequence_done) cmd_busy <= 0;
else cmd_busy <= {cmd_busy[1:0],run_seq};
else cmd_busy <= {cmd_busy[1:0],run_seq | cmd_busy[0]};
// Pause counter
if (rst) pause_cntr <= 0;
else if (!cmd_busy[1]) pause_cntr <= 0; // not needed?
......@@ -169,7 +174,7 @@ module ddrc_sequencer #(
// Fetch - command data valid
if (rst) cmd_fetch <= 0;
else cmd_fetch <= cmd_busy[0] && !pause;
// Command read adderss
// Command read address
if (rst) cmd_addr <= 0;
else if (run_seq) cmd_addr <= run_addr[9:0];
else if (cmd_busy[0] && !pause) cmd_addr <= cmd_addr + 1;
......@@ -181,7 +186,7 @@ module ddrc_sequencer #(
else if (run_seq) case (run_chn)
4'h0: buf_page <= port0_int_page;
4'h1: buf_page <= port1_int_page;
// Add other channles later
// Add other channels later
default: buf_page <= 2'bxx;
endcase
......@@ -206,6 +211,12 @@ module ddrc_sequencer #(
if (rst) buf_raddr <= 9'h0;
else if (run_seq_d) buf_raddr <= {buf_page,7'h0};
else if (buf_wr || buf_rd) buf_raddr <= buf_raddr +1; // Separate read/write address? read address re-registered @ negedge
if (rst) run_chn_d <= 0;
else run_chn_d <= run_chn;
if (rst) run_seq_d <= 0;
else run_seq_d <= run_seq;
end
// re-register buffer write address to match DDR3 data
always @ (negedge mclk) begin
......@@ -213,21 +224,19 @@ module ddrc_sequencer #(
buf_wr_negedge <= buf_wr;
buf_wdata_negedge <= buf_wdata;
end
always @ (posedge mclk) begin
run_chn_d <= run_chn;
run_seq_d <= run_seq;
end
// Command sequence memories:
// Command sequence memory 0 ("manual"):
wire ren0=!cmd_sel && cmd_busy[0] && !pause; // cmd_busy - multibit
wire ren1= cmd_sel && cmd_busy[0] && !pause;
ram_1kx32_1kx32 #(
.REGISTERS(1) // register output
.REGISTERS(1) // (0) // register output
) cmd0_buf_i (
.rclk (mclk), // input
.raddr (cmd_addr), // input[9:0]
.ren (!cmd_sel && cmd_busy && !pause), // input
.regen (!cmd_sel && cmd_busy && !pause), // input
/// .ren (!cmd_sel && cmd_busy && !pause), // input
/// .regen (!cmd_sel && cmd_busy && !pause), // input
.ren (ren0), // input TODO: verify cmd_busy[0] is correct (was cmd_busy )
.regen (ren0), // input
.data_out (phy_cmd0_word), // output[31:0]
.wclk (cmd0_clk), // input
.waddr (cmd0_addr), // input[9:0]
......@@ -238,12 +247,14 @@ module ddrc_sequencer #(
// Command sequence memory 0 ("manual"):
ram_1kx32_1kx32 #(
.REGISTERS(1) // register output
.REGISTERS(1) // (0) // register output
) cmd1_buf_i (
.rclk (mclk), // input
.raddr (cmd_addr), // input[9:0]
.ren ( cmd_sel && cmd_busy && !pause), // input
.regen ( cmd_sel && cmd_busy && !pause), // input
/// .ren ( cmd_sel && cmd_busy && !pause), // input
/// .regen ( cmd_sel && cmd_busy && !pause), // input
.ren ( ren1), // input
.regen ( ren1), // input
.data_out (phy_cmd1_word), // output[31:0]
.wclk (cmd1_clk), // input
.waddr (cmd1_addr), // input[9:0]
......@@ -302,7 +313,8 @@ module ddrc_sequencer #(
.CLKFBOUT_DIV_REF (CLKFBOUT_DIV_REF),
.DIVCLK_DIVIDE (DIVCLK_DIVIDE),
.CLKFBOUT_PHASE (CLKFBOUT_PHASE),
.SDCLK_PHASE (SDCLK_PHASE),
.SDCLK_PHASE (SDCLK_PHASE),/// debugging
.CLK_PHASE (CLK_PHASE),
.CLK_DIV_PHASE (CLK_DIV_PHASE),
.MCLK_PHASE (MCLK_PHASE),
......@@ -314,6 +326,7 @@ module ddrc_sequencer #(
.CMD_DONE_BIT (CMD_DONE_BIT) // bit number (address) to signal sequence done
) phy_cmd_i (
.SDRST (SDRST), // output ****************
.SDCLK (SDCLK), // output
.SDNCLK (SDNCLK), // output
.SDA (SDA[ADDRESS_NUMBER-1:0]), // output[14:0]
......@@ -340,7 +353,9 @@ module ddrc_sequencer #(
.locked (locked), // output
.ps_rdy (ps_rdy), // output
.ps_out (ps_out[7:0]), // output[7:0]
.phy_cmd_word (phy_cmd_word[31:0]), // input[35:0]
/// debugging
// .phy_cmd_word (32'h0), //phy_cmd_word[31:0]), // input[31:0]
.phy_cmd_word (phy_cmd_word[31:0]), // input[31:0]
.phy_cmd_nop (phy_cmd_nop), // output
.pause_len (pause_len), // output [CMD_PAUSE_BITS-1:0]
.sequence_done (sequence_done), // output
......@@ -349,7 +364,9 @@ module ddrc_sequencer #(
.buf_rdata (buf_rdata[63:0]), // input[63:0]
.buf_wr (buf_wr), // output
.buf_rd (buf_rd), // output
.cmda_tri (cmda_tri), // input
.cmda_en (cmda_en), // input
.ddr_rst (ddr_rst), // input ***************
.ddr_cke (ddr_cke), // input ***************
.inv_clk_div (inv_clk_div), // input
.dqs_pattern (dqs_pattern), // input[7:0]
.dqm_pattern (dqm_pattern) // input[7:0]
......
phy/phy_cmd.v
View file @ 3d67d687
......@@ -49,9 +49,10 @@ module phy_cmd#(
parameter CMD_DONE_BIT= 6 // bit number (address) to signal sequence done
)(
// DDR3 interface
output SDRST, // DDR3 reset (active low)
output SDCLK, // DDR3 clock differential output, positive
output SDNCLK,// DDR3 clock differential output, negative
output [ADDRESS_NUMBER-1:0] SDA, // output address ports (14:0) for 4Gb device
output [ADDRESS_NUMBER-1:0] SDA, // output address ports (14:0) for 4Gb deviceencode_seq_word
output [2:0] SDBA, // output bank address ports
output SDWE, // output WE port
output SDRAS, // output RAS port
......@@ -91,7 +92,10 @@ module phy_cmd#(
output buf_wr, // write buffer (next cycle!)
output buf_rd, // read buffer (ready next cycle)
// extras
input cmda_tri, // tristate command and address lines // not likely to be used
// input cmda_tri, // tristate command and address lines // not likely to be used
input cmda_en, // tristate command and address lines // not likely to be used
input ddr_rst, // generate reset to DDR3 memory (active high)
input ddr_cke, // DDR clock enable , XOR-ed with command bit
input inv_clk_div,
input [7:0] dqs_pattern, // 8'h55
input [7:0] dqm_pattern // 8'h00
......@@ -104,16 +108,22 @@ module phy_cmd#(
// Decoding phy_cmd[35:0] into individual fields;
wire [ADDRESS_NUMBER-1:0] phy_addr_in; // also provides pause length when the command is NOP
wire [ 2:0] phy_bank_in;
wire [ 2:0] phy_rcw_pos; // positive lof=gic for RAS, CAS, WE (0 - NOP)
wire [ 2:0] phy_rcw_in; // {ras,cas,we}
wire phy_odt_in; // may be optimized?
wire phy_cke_dis; // command bit 0: enable CKE, 1 - disable CKE
wire phy_cke_in; // may be optimized?
wire phy_sel_in; // fitst/second half-cycle, oter will be nop (cke+odt applicable to both)
wire phy_sel_in; // first/second half-cycle, oter will be nop (cke+odt applicable to both)
wire phy_dq_en_in;
wire phy_dqs_en_in;
wire phy_dq_tri_in; // tristate DQ lines (internal timing sequencer for 0->1 and 1->0)
wire phy_dqs_tri_in; // tristate DQS lines (internal timing sequencer for 0->1 and 1->0)
wire phy_dci_en_in; // DCI disable, both DQ and DQS lines (internal logic and timing sequencer for 0->1 and 1->0)
wire phy_dci_in; // DCI disable, both DQ and DQS lines (internal logic and timing sequencer for 0->1 and 1->0)
// wire [ 6:0] phy_buf_addr; // connect to extrenal buffer
wire phy_buf_wr; // connect to extrenal buffer
wire phy_buf_rd; // connect to extrenal buffer
wire cmda_tri;
// wire clk;
wire clk_div;
......@@ -127,7 +137,7 @@ module phy_cmd#(
wire [ 5:0] phy_bank;
wire [ 5:0] phy_rcw; // {ras,cas,we}
wire [1:0] phy_odt; // may be optimized?
wire [1:0] phy_cke; // may be optimized?
wire [1:0] phy_cke; // may be optphy_dqs_tri_inimized?
wire [7:0] phy_dq_tri; // tristate DQ lines (internal timing sequencer for 0->1 and 1->0)
wire [7:0] phy_dqs_tri; // tristate DQS lines (internal timing sequencer for 0->1 and 1->0)
wire phy_dci_dis_dq;
......@@ -148,20 +158,25 @@ module phy_cmd#(
assign {
phy_addr_in,
phy_bank_in,
phy_rcw_in, // {ras,cas,we}
phy_rcw_pos, // {ras,cas,we}
phy_odt_in, // may be optimized?
phy_cke_in, // may be optimized?
phy_cke_dis, // disable cke (0 - enable), also controlled by a command bit ddr_cke (XOR-ed)
phy_sel_in, // fitst/second half-cycle, oter will be nop (cke+odt applicable to both)
phy_dq_tri_in, // tristate DQ lines (internal timing sequencer for 0->1 and 1->0)
phy_dqs_tri_in, // tristate DQS lines (internal timing sequencer for 0->1 and 1->0)
phy_dci_in, // DCI disable, both DQ and DQS lines (internal logic and timing sequencer for 0->1 and 1->0)
phy_dq_en_in, //phy_dq_tri_in, // tristate DQ lines (internal timing sequencer for 0->1 and 1->0)
phy_dqs_en_in, //phy_dqs_tri_in, // tristate DQS lines (internal timing sequencer for 0->1 and 1->0)
phy_dci_en_in, //phy_dci_in, // DCI disable, both DQ and DQS lines (internal logic and timing sequencer for 0->1 and 1->0)
// phy_buf_addr, // connect to external buffer (is it needed? maybe just autoincrement?)
phy_buf_wr, // connect to external buffer (but only if not paused)
phy_buf_rd, // connect to external buffer (but only if not paused)
phy_spare // Reserved for future use
} = phy_cmd_word;
assign phy_cmd_nop= (phy_rcw_in==0);
assign sequence_done= (phy_rcw_in==0) && phy_addr_in[CMD_DONE_BIT];
assign phy_cke_in= phy_cke_dis ^ ddr_cke;
assign phy_dq_tri_in= ~phy_dq_en_in;
assign phy_dqs_tri_in=~phy_dqs_en_in;
assign phy_dci_in= ~phy_dci_en_in;
assign phy_rcw_in= ~phy_rcw_pos;
assign phy_cmd_nop= (phy_rcw_pos==0);
assign sequence_done= phy_cmd_nop && phy_addr_in[CMD_DONE_BIT];
assign pause_len= phy_addr_in[CMD_PAUSE_BITS-1:0];
// assign buf_addr = phy_buf_addr;
......@@ -170,7 +185,7 @@ module phy_cmd#(
assign phy_addr= {phy_addr_in,phy_addr_in}; // also provides pause length when the command is NOP
assign phy_bank= {phy_bank_in,phy_bank_in};
assign phy_rcw= {phy_sel_in?phy_rcw_in:3'h0, phy_sel_in?3'h0:phy_rcw_in}; // {ras,cas,we}
assign phy_rcw= {phy_sel_in?phy_rcw_in:3'h7, phy_sel_in?3'h7:phy_rcw_in}; // {ras,cas,we}
assign phy_odt= {phy_odt_in,phy_odt_in}; // may be optimized?
assign phy_cke= {phy_cke_in,phy_cke_in}; // may be optimized?
......@@ -189,6 +204,8 @@ module phy_cmd#(
assign buf_wdata[63:0] = phy_rdata_r[63:0];
assign cmda_tri=!cmda_en;
always @ (posedge mclk) begin
dqs_tri_prev <= phy_dqs_tri_in;
dq_tri_prev <= phy_dq_tri_in;
......@@ -274,6 +291,7 @@ phy_rdata
.SS_MODE (SS_MODE),
.SS_MOD_PERIOD (SS_MOD_PERIOD)
) phy_top_i (
.ddr3_nrst (SDRST), // output
.ddr3_clk (SDCLK), // output
.ddr3_nclk (SDNCLK), // output
.ddr3_a (SDA[ADDRESS_NUMBER-1:0]), // output[14:0]
......@@ -295,7 +313,9 @@ phy_rdata
.clk (), // output
.clk_div (clk_div), // output
.mclk (mclk), // output
.rst_in (rst_in), // input
.ddr_rst (ddr_rst), // input
.in_a (phy_addr[2*ADDRESS_NUMBER-1:0]), // input[29:0]
.in_ba (phy_bank[5:0]), // input[5:0]
.in_we ({phy_rcw[3],phy_rcw[0]}), // input[1:0]
......
phy/phy_top.v
View file @ 3d67d687
......@@ -52,6 +52,7 @@ module phy_top #(
parameter SS_MODE = "CENTER_HIGH",
parameter SS_MOD_PERIOD = 10000
)(
output ddr3_nrst, // output NRST port
output ddr3_clk, // DDR3 clock differential output, positive
output ddr3_nclk,// DDR3 clock differential output, negative
output [ADDRESS_NUMBER-1:0] ddr3_a, // output address ports (14:0) for 4Gb device
......@@ -75,7 +76,7 @@ module phy_top #(
output clk_div, // free-running half clk frequency, front aligned to clk (shared for R/W), BUFR output
output mclk, // same as clk_div, through separate BUFG and static phase adjust
input rst_in, // reset delays/serdes
input ddr_rst, // active high - generate NRST to memory
input [2*ADDRESS_NUMBER-1:0] in_a, // input address, 2 bits per signal (first, second) (29:0) for 4Gb device
input [5:0] in_ba, // input bank address, 2 bits per signal (first, second)
input [1:0] in_we, // input WE, 2 bits (first, second)
......@@ -119,6 +120,19 @@ module phy_top #(
wire clk_ref; // 200MHz/300Mhz to calibrate I/O delays
wire locked_mmcm,locked_pll, dly_ready;
assign locked=locked_mmcm && locked_pll && dly_ready; // both PLL ready, I/O delay calibrated
/* memory reset */
obuf #(
.CAPACITANCE("DONT_CARE"),
.DRIVE(12),
.IOSTANDARD(IOSTANDARD_CMDA),
.SLEW("SLOW")
) obuf_i (
.O(ddr3_nrst), // output
.I(~ddr_rst) // input
);
cmd_addr #(
.IODELAY_GRP(IODELAY_GRP),
.IOSTANDARD(IOSTANDARD_CMDA),
......
util_modules/fifo_cross_clocks.v
View file @ 3d67d687
......@@ -65,9 +65,10 @@ module fifo_cross_clocks
// False positive in nempty can only happen if
// a) it is transitioning from empty to non-empty due to we pulse
// b) it is transitioning to overrun - too bad already
// false negative - OK, just wait fro the next rclk
// false negative - OK, just wait for the next rclk
// assign nempty=waddr_gray_rclk != raddr_gray;
assign nempty=waddr_gray_rclk[3:0] != raddr_gray[3:0];
// assign nempty=waddr_gray_rclk[3:0] != raddr_gray[3:0];
assign nempty= (waddr_gray_rclk[3:0] ^ raddr_gray[3:0]) != 4'b0;
assign data_out=ram[raddr];
always @ (posedge wclk or posedge rst) begin
if (rst) waddr <= 0;
......
wrap/obuf.v 0 → 100644
View file @ 3d67d687
/*******************************************************************************
* Module: obuf
* Date:2014-05-27
* Author: Andrey Filippov
* Description: Wrapper for OBUF primitive
*
* Copyright (c) 2014 Elphel, Inc.
* obuf.v is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* obuf.v is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
`timescale 1ns/1ps
module obuf # (
parameter CAPACITANCE="DONT_CARE",
parameter DRIVE = 12,
parameter IOSTANDARD = "DEFAULT",
parameter SLEW = "SLOW"
) (
output O,
input I
);
OBUF #(
.CAPACITANCE(CAPACITANCE),
.DRIVE(DRIVE),
.IOSTANDARD(IOSTANDARD),
.SLEW(SLEW)
) OBUF_i (
.O(O), // output
.I(I) // input
);
endmodule
wrap/oddr_ds.v
View file @ 3d67d687
......@@ -21,7 +21,7 @@
`timescale 1ns/1ps
module oddr_ds # (
parameter CAPACITANCE ="DONT_CARE",
parameter CAPACITANCE = "DONT_CARE",
parameter IOSTANDARD = "DIFF_SSTL15",
parameter SLEW = "SLOW",
parameter DDR_CLK_EDGE = "OPPOSITE_EDGE",
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment