Added i2c sequencer almost full status bit

fpga_version.vh

@@ -35,7 +35,8 @@
  * contains all the components and scripts required to completely simulate it
  * with at least one of the Free Software programs.
  */
-        parameter FPGA_VERSION =          32'h039300ba;      //parallel, fixing introduced by debug bug in sens_parallel12.v: met, 80.03%
+        parameter FPGA_VERSION =          32'h039300bb;      //parallel, adding i2c almost full. -0.101/8, 79.37%
+//        parameter FPGA_VERSION =          32'h039300ba;      //parallel, fixing introduced by debug bug in sens_parallel12.v: met, 80.03%
 //        parameter FPGA_VERSION =          32'h039300b9;      //parallel, correcting RTC (it was 25/24 faster) -0.038/29, 79.64%
 //      parameter FPGA_VERSION =          32'h039300b8;      //parallel, working on camsync -0.330/99, 80.52% -> -0.143 /40, 79.88% 
 //      parameter FPGA_VERSION =          32'h039300b7;      //parallel, matching histograms Bayer to gamma bayer -0.011/9, 79.92%

py393/x393_export_c.py

@@ -1826,7 +1826,7 @@ class X393ExportC(object):
         dw.append(("i2c_fifo_nempty",        8, 1,0,  "I2C read FIFO has data"))
         dw.append(("i2c_fifo_lsb",           9, 1,0,  "I2C FIFO byte counter (odd/even bytes)"))
         dw.append(("busy",                  10, 1,0,  "I2C sequencer busy"))
-        dw.append(("alive_fs",              11, 1,0,  "Sensor generated frame sync since last status update"))
+        dw.append(("wr_full",               11, 1,0,  "Write buffer almost full (14..3/4 in ASAP mode)"))
         dw.append(("frame_num",             12, 4,0,  "I2C sequencer frame number"))
         dw.append(("req_clr",               16, 1,0,  "Request for clearing fifo_wp (delay frame sync if previous is not yet sent out)"))
         dw.append(("reset_on",              17, 1,0,  "Reset in progress"))

py393/x393_jpeg.py

@@ -1903,8 +1903,8 @@ set_gpio_ports  1   1 # enable software gpio pins and porta (camsync)
 set_gpio_pins 0 1 # pin 0 low, pin 1 - high
 
 set_camsync_period 31 # set bit duration
-set_camsync_period 7500 # 75 usec
-set_camsync_delay 0 0
+set_camsync_period  8000 # 80 usec
+set_camsync_delay 0 400
 set_camsync_delay 1 100
 set_camsync_delay 2 200
 set_camsync_delay 3 300
@@ -2014,7 +2014,7 @@ jpeg_sim_multi 4
 #set_camsync_mode  <en=None>  <en_snd=None>  <en_ts_external=None>  <triggered_mode=None>  <master_chn=None>  <chn_en=None> 
 set_camsync_mode     None        None            None                      0
 jpeg_sim_multi 4
-jpeg_sim_multi 4
+jpeg_sim_multi 8
 
 
 

py393/x393_sensor.py

@@ -240,7 +240,7 @@ class X393Sensor(object):
         print ("   reset_on =               %d"%((status>>17) & 1))
         print ("   req_clr =                %d"%((status>>16) & 1))
         print ("   frame_num =              %d"%((status>>12) & 0xf))
-        print ("   alive_fs =               %d"%((status>>11) & 1))
+        print ("   wr_full =                %d"%((status>>11) & 1))
         print ("   busy =                   %d"%((status>>10) & 1))
         print ("   i2c_fifo_lsb =           %d"%((status>> 9) & 1))
         print ("   i2c_fifo_nempty =        %d"%((status>> 8) & 1))
@@ -1326,7 +1326,7 @@ class X393Sensor(object):
         print ("print_status_sensor_i2c(%d):"%(num_sensor))
         print ("   reset_on =               %d"%((status>> 7) & 1))
         print ("   req_clr =                %d"%((status>> 6) & 1))
-        print ("   alive_fs =               %d"%((status>> 5) & 1))
+        print ("   wr_full =               %d"%((status>> 5) & 1))
         
         print ("   busy =                   %d"%((status>> 4) & 1))
         print ("   frame_num =              %d"%((status>> 0)  & 0xf))

sensor/sensor_i2c.v

@@ -198,6 +198,14 @@ module  sensor_i2c#(
      reg     [5:0] fifo_fill;  // number of words written to the other (not current) page, or difference wp-rp for the current
      wire    [5:0] fifo_wr_pointers_next; // pointer value to be written to  fifo_wr_pointers_ram[wpage_wr]
      
+     // Preventing overflow when many i2c commands are written in ASAP mode (stopped compressor) 
+     wire    [1:0] send_diff= fifo_wr_pointers_outr[5:4] - rpointer[5:4]; // to determine buffer full in ASAP mode
+     wire          wr_full_w = (wpage0==wpage_wr)? // is it ASAP mode (i.e. sequencer is stopped, progr. 10359)
+                                send_diff[1]: // 1/4..3/4 full in ASAP mode
+                                (&fifo_wr_pointers_outw_r[5:2]); // current page almost full
+     reg           wr_full_r;                             
+// fifo_wr_pointers_outw_r         
+     
      assign set_ctrl_w = we_cmd && ((wa & ~SENSI2C_CTRL_MASK) == SENSI2C_CTRL );// ==0
      assign set_status_w = we_cmd && ((wa & ~SENSI2C_CTRL_MASK) == SENSI2C_STATUS );// ==0
      assign  pre_wpage0_inc = (!wen && !(|wen_r) && !wpage0_inc[0]) && (req_clr || reset_on) ;
@@ -217,13 +225,13 @@ module  sensor_i2c#(
      assign fifo_wr_pointers_next = wpage0_inc[1]? 6'h0:(fifo_wr_pointers_outw_r[5:0]+1);
 
 
-     
+/*    
     reg alive_fs;
     always @ (posedge mclk) begin
         if    (set_status_w) alive_fs <= 0;
         else if (frame_sync) alive_fs <= 1;
     end
-    
+*/    
 
     cmd_deser #(
         .ADDR        (SENSI2C_ABS_ADDR),
@@ -258,7 +266,10 @@ module  sensor_i2c#(
         .status     ({reset_on, req_clr,
                       fifo_fill[5:0],
                       frame_num[3:0],
-                      alive_fs,busy, i2c_fifo_cntrl, i2c_fifo_nempty,
+                      wr_full_r, // alive_fs,
+                      busy,
+                      i2c_fifo_cntrl,
+                      i2c_fifo_nempty,
                       i2c_fifo_dout[7:0],
                       sda_in, scl_in}), // input[25:0] 
         .ad         (status_ad), // output[7:0] 
@@ -281,6 +292,8 @@ module  sensor_i2c#(
     );
      
     always @ (posedge mclk) begin
+        wr_full_r <= wr_full_w;  // write buffer is almost full
+    
         if (wen) di_r <= di; // 32 bit command takes 6 cycles, so di_r can hold data for up to this long
         wen_r    <= {wen_r[0],wen}; // is it needed?      
 //        wen_fifo <= {wen_fifo[0],we_rel || we_abs};      
@@ -387,7 +400,7 @@ module  sensor_i2c#(
       else if (page_r_inc[0]) page_r <= page_r+1;
 `endif
 
-//############ rpointer should start not from 0, but form value in another RAM???
+//############ rpointer should start not from 0, but from the value in another RAM???
       if      (reset_cmd || page_r_inc[0])  rpointer[5:0] <= 6'h0;
       else if (i2c_run_d && ! i2c_run)      rpointer[5:0] <= rpointer[5:0] + 1;