Skip to content

X
x393
Commit 74db68c1 authored by Andrey Filippov's avatar Andrey Filippov
Browse files
Options

more on sensor i2c

parent 2a260f5a
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 290 additions and 292 deletions
includes/x393_parameters.vh
View file @ 74db68c1
...@@ -346,18 +346,16 @@ ...@@ -346,18 +346,16 @@
// sensor_i2c_io relative control register addresses // sensor_i2c_io relative control register addresses
parameter SENSI2C_CTRL = 'h0, parameter SENSI2C_CTRL = 'h0,
// Control register bits // Control register bits
parameter SENSI2C_CMD_TABLE = 29, // [29]: 1 - write to translation table (ignore any other fields), 0 - write other fields
parameter SENSI2C_CMD_TAND = 28, // [28]: 1 - write table address (8 bits), 0 - write table data (28 bits)
parameter SENSI2C_CMD_RESET = 14, // [14] reset all FIFO (takes 16 clock pulses), also - stops i2c until run command parameter SENSI2C_CMD_RESET = 14, // [14] reset all FIFO (takes 16 clock pulses), also - stops i2c until run command
parameter SENSI2C_CMD_RUN = 13, // [13:12]3 - run i2c, 2 - stop i2c (needed before software i2c), 1,0 - no change to run state parameter SENSI2C_CMD_RUN = 13, // [13:12]3 - run i2c, 2 - stop i2c (needed before software i2c), 1,0 - no change to run state
parameter SENSI2C_CMD_RUN_PBITS = 1, parameter SENSI2C_CMD_RUN_PBITS = 1,
parameter SENSI2C_CMD_BYTES = 11, // if 1, use [10:9] to set command bytes to send after slave address (0..3) parameter SENSI2C_CMD_FIFO_RD = 3, // advane I2C read data FIFO by 1
parameter SENSI2C_CMD_BYTES_PBITS = 2, parameter SENSI2C_CMD_ACIVE = 2, // [2] - SENSI2C_CMD_ACIVE_EARLY0, SENSI2C_CMD_ACIVE_SDA
parameter SENSI2C_CMD_DLY = 8, // [7:0] - duration of quater i2c cycle (if 0, [3:0] control SCL+SDA) parameter SENSI2C_CMD_ACIVE_EARLY0 = 1, // release SDA==0 early if next bit ==1
parameter SENSI2C_CMD_DLY_PBITS = 8, parameter SENSI2C_CMD_ACIVE_SDA = 0, // drive SDA=1 during the second half of SCL=1
// direct control of SDA/SCL mutually exclusive with DLY control, disabled by running i2c
parameter SENSI2C_CMD_SCL = 16, // [17:16] : 0: NOP, 1: 1'b0->SCL, 2: 1'b1->SCL, 3: 1'bz -> SCL
parameter SENSI2C_CMD_SCL_WIDTH = 2,
parameter SENSI2C_CMD_SDA = 18, // [19:18] : 0: NOP, 1: 1'b0->SDA, 2: 1'b1->SDA, 3: 1'bz -> SDA,
parameter SENSI2C_CMD_SDA_WIDTH = 2,
parameter SENSI2C_STATUS = 'h1, parameter SENSI2C_STATUS = 'h1,
......
sensor/sensor_channel.v
View file @ 74db68c1
...@@ -62,18 +62,16 @@ module sensor_channel#( ...@@ -62,18 +62,16 @@ module sensor_channel#(
// sensor_i2c_io relative control register addresses // sensor_i2c_io relative control register addresses
parameter SENSI2C_CTRL = 'h0, parameter SENSI2C_CTRL = 'h0,
// Control register bits // Control register bits
parameter SENSI2C_CMD_TABLE = 29, // [29]: 1 - write to translation table (ignore any other fields), 0 - write other fields
parameter SENSI2C_CMD_TAND = 28, // [28]: 1 - write table address (8 bits), 0 - write table data (28 bits)
parameter SENSI2C_CMD_RESET = 14, // [14] reset all FIFO (takes 16 clock pulses), also - stops i2c until run command parameter SENSI2C_CMD_RESET = 14, // [14] reset all FIFO (takes 16 clock pulses), also - stops i2c until run command
parameter SENSI2C_CMD_RUN = 13, // [13:12]3 - run i2c, 2 - stop i2c (needed before software i2c), 1,0 - no change to run state parameter SENSI2C_CMD_RUN = 13, // [13:12]3 - run i2c, 2 - stop i2c (needed before software i2c), 1,0 - no change to run state
parameter SENSI2C_CMD_RUN_PBITS = 1, parameter SENSI2C_CMD_RUN_PBITS = 1,
parameter SENSI2C_CMD_BYTES = 11, // if 1, use [10:9] to set command bytes to send after slave address (0..3) parameter SENSI2C_CMD_FIFO_RD = 3, // advane I2C read data FIFO by 1
parameter SENSI2C_CMD_BYTES_PBITS = 2, parameter SENSI2C_CMD_ACIVE = 2, // [2] - SENSI2C_CMD_ACIVE_EARLY0, SENSI2C_CMD_ACIVE_SDA
parameter SENSI2C_CMD_DLY = 8, // [7:0] - duration of quater i2c cycle (if 0, [3:0] control SCL+SDA) parameter SENSI2C_CMD_ACIVE_EARLY0 = 1, // release SDA==0 early if next bit ==1
parameter SENSI2C_CMD_DLY_PBITS = 8, parameter SENSI2C_CMD_ACIVE_SDA = 0, // drive SDA=1 during the second half of SCL=1
// direct control of SDA/SCL mutually exclusive with DLY control, disabled by running i2c
parameter SENSI2C_CMD_SCL = 16, // [17:16] : 0: NOP, 1: 1'b0->SCL, 2: 1'b1->SCL, 3: 1'bz -> SCL
parameter SENSI2C_CMD_SCL_WIDTH = 2,
parameter SENSI2C_CMD_SDA = 18, // [19:18] : 0: NOP, 1: 1'b0->SDA, 2: 1'b1->SDA, 3: 1'bz -> SDA,
parameter SENSI2C_CMD_SDA_WIDTH = 2,
parameter SENSI2C_STATUS = 'h1, parameter SENSI2C_STATUS = 'h1,
...@@ -486,23 +484,21 @@ module sensor_channel#( ...@@ -486,23 +484,21 @@ module sensor_channel#(
.SENSI2C_CTRL (SENSI2C_CTRL), .SENSI2C_CTRL (SENSI2C_CTRL),
.SENSI2C_STATUS (SENSI2C_STATUS), .SENSI2C_STATUS (SENSI2C_STATUS),
.SENSI2C_STATUS_REG (SENSI2C_STATUS_REG), .SENSI2C_STATUS_REG (SENSI2C_STATUS_REG),
.SENSI2C_CMD_TABLE (SENSI2C_CMD_TABLE),
.SENSI2C_CMD_TAND (SENSI2C_CMD_TAND),
.SENSI2C_CMD_RESET (SENSI2C_CMD_RESET), .SENSI2C_CMD_RESET (SENSI2C_CMD_RESET),
.SENSI2C_CMD_RUN (SENSI2C_CMD_RUN), .SENSI2C_CMD_RUN (SENSI2C_CMD_RUN),
.SENSI2C_CMD_RUN_PBITS (SENSI2C_CMD_RUN_PBITS), .SENSI2C_CMD_RUN_PBITS (SENSI2C_CMD_RUN_PBITS),
.SENSI2C_CMD_BYTES (SENSI2C_CMD_BYTES), .SENSI2C_CMD_FIFO_RD (SENSI2C_CMD_FIFO_RD),
.SENSI2C_CMD_BYTES_PBITS (SENSI2C_CMD_BYTES_PBITS), .SENSI2C_CMD_ACIVE (SENSI2C_CMD_ACIVE),
.SENSI2C_CMD_DLY (SENSI2C_CMD_DLY), .SENSI2C_CMD_ACIVE_EARLY0(SENSI2C_CMD_ACIVE_EARLY0),
.SENSI2C_CMD_DLY_PBITS (SENSI2C_CMD_DLY_PBITS), .SENSI2C_CMD_ACIVE_SDA (SENSI2C_CMD_ACIVE_SDA),
.SENSI2C_CMD_SCL (SENSI2C_CMD_SCL),
.SENSI2C_CMD_SCL_WIDTH (SENSI2C_CMD_SCL_WIDTH),
.SENSI2C_CMD_SDA (SENSI2C_CMD_SDA),
.SENSI2C_CMD_SDA_WIDTH (SENSI2C_CMD_SDA_WIDTH),
.SENSI2C_DRIVE (SENSI2C_DRIVE), .SENSI2C_DRIVE (SENSI2C_DRIVE),
.SENSI2C_IBUF_LOW_PWR (SENSI2C_IBUF_LOW_PWR), .SENSI2C_IBUF_LOW_PWR (SENSI2C_IBUF_LOW_PWR),
.SENSI2C_IOSTANDARD (SENSI2C_IOSTANDARD), .SENSI2C_IOSTANDARD (SENSI2C_IOSTANDARD),
.SENSI2C_SLEW (SENSI2C_SLEW) .SENSI2C_SLEW (SENSI2C_SLEW)
) sensor_i2c_io_i ( ) sensor_i2c_io_i (
.mrst (mrst), // input .mrst (mrst), // input
.mclk (mclk), // input .mclk (mclk), // input
.cmd_ad (cmd_ad), // input[7:0] .cmd_ad (cmd_ad), // input[7:0]
.cmd_stb (cmd_stb), // input .cmd_stb (cmd_stb), // input
......
sensor/sensor_i2c.v
View file @ 74db68c1
This diff is collapsed.
sensor/sensor_i2c_io.v
View file @ 74db68c1
...@@ -30,18 +30,16 @@ module sensor_i2c_io#( ...@@ -30,18 +30,16 @@ module sensor_i2c_io#(
parameter SENSI2C_STATUS = 'h1, parameter SENSI2C_STATUS = 'h1,
parameter SENSI2C_STATUS_REG = 'h20, parameter SENSI2C_STATUS_REG = 'h20,
// Control register bits // Control register bits
parameter SENSI2C_CMD_TABLE = 29, // [29]: 1 - write to translation table (ignore any other fields), 0 - write other fields
parameter SENSI2C_CMD_TAND = 28, // [28]: 1 - write table address (8 bits), 0 - write table data (28 bits)
parameter SENSI2C_CMD_RESET = 14, // [14] reset all FIFO (takes 16 clock pulses), also - stops i2c until run command parameter SENSI2C_CMD_RESET = 14, // [14] reset all FIFO (takes 16 clock pulses), also - stops i2c until run command
parameter SENSI2C_CMD_RUN = 13, // [13:12]3 - run i2c, 2 - stop i2c (needed before software i2c), 1,0 - no change to run state parameter SENSI2C_CMD_RUN = 13, // [13:12]3 - run i2c, 2 - stop i2c (needed before software i2c), 1,0 - no change to run state
parameter SENSI2C_CMD_RUN_PBITS = 1, parameter SENSI2C_CMD_RUN_PBITS = 1,
parameter SENSI2C_CMD_BYTES = 11, // if 1, use [10:9] to set command bytes to send after slave address (0..3)
parameter SENSI2C_CMD_BYTES_PBITS = 2, parameter SENSI2C_CMD_FIFO_RD = 3, // advane I2C read data FIFO by 1
parameter SENSI2C_CMD_DLY = 8, // [7:0] - duration of quater i2c cycle (if 0, [3:0] control SCL+SDA) parameter SENSI2C_CMD_ACIVE = 2, // [2] - SENSI2C_CMD_ACIVE_EARLY0, SENSI2C_CMD_ACIVE_SDA
parameter SENSI2C_CMD_DLY_PBITS = 8, parameter SENSI2C_CMD_ACIVE_EARLY0 = 1, // release SDA==0 early if next bit ==1
// direct control of SDA/SCL mutually exclusive with DLY control, disabled by running i2c parameter SENSI2C_CMD_ACIVE_SDA = 0, // drive SDA=1 during the second half of SCL=1
parameter SENSI2C_CMD_SCL = 16, // [17:16] : 0: NOP, 1: 1'b0->SCL, 2: 1'b1->SCL, 3: 1'bz -> SCL
parameter SENSI2C_CMD_SCL_WIDTH = 2,
parameter SENSI2C_CMD_SDA = 18, // [19:18] : 0: NOP, 1: 1'b0->SDA, 2: 1'b1->SDA, 3: 1'bz -> SDA,
parameter SENSI2C_CMD_SDA_WIDTH = 2,
// I/O parameters // I/O parameters
parameter integer SENSI2C_DRIVE = 12, parameter integer SENSI2C_DRIVE = 12,
parameter SENSI2C_IBUF_LOW_PWR = "TRUE", parameter SENSI2C_IBUF_LOW_PWR = "TRUE",
...@@ -75,17 +73,15 @@ module sensor_i2c_io#( ...@@ -75,17 +73,15 @@ module sensor_i2c_io#(
.SENSI2C_CTRL (SENSI2C_CTRL), .SENSI2C_CTRL (SENSI2C_CTRL),
.SENSI2C_STATUS (SENSI2C_STATUS), .SENSI2C_STATUS (SENSI2C_STATUS),
.SENSI2C_STATUS_REG (SENSI2C_STATUS_REG), .SENSI2C_STATUS_REG (SENSI2C_STATUS_REG),
.SENSI2C_CMD_TABLE (SENSI2C_CMD_TABLE),
.SENSI2C_CMD_TAND (SENSI2C_CMD_TAND),
.SENSI2C_CMD_RESET (SENSI2C_CMD_RESET), .SENSI2C_CMD_RESET (SENSI2C_CMD_RESET),
.SENSI2C_CMD_RUN (SENSI2C_CMD_RUN), .SENSI2C_CMD_RUN (SENSI2C_CMD_RUN),
.SENSI2C_CMD_RUN_PBITS (SENSI2C_CMD_RUN_PBITS), .SENSI2C_CMD_RUN_PBITS (SENSI2C_CMD_RUN_PBITS),
.SENSI2C_CMD_BYTES (SENSI2C_CMD_BYTES), .SENSI2C_CMD_FIFO_RD (SENSI2C_CMD_FIFO_RD),
.SENSI2C_CMD_BYTES_PBITS (SENSI2C_CMD_BYTES_PBITS), .SENSI2C_CMD_ACIVE (SENSI2C_CMD_ACIVE),
.SENSI2C_CMD_DLY (SENSI2C_CMD_DLY), .SENSI2C_CMD_ACIVE_EARLY0(SENSI2C_CMD_ACIVE_EARLY0),
.SENSI2C_CMD_DLY_PBITS (SENSI2C_CMD_DLY_PBITS), .SENSI2C_CMD_ACIVE_SDA (SENSI2C_CMD_ACIVE_SDA)
.SENSI2C_CMD_SCL (SENSI2C_CMD_SCL),
.SENSI2C_CMD_SCL_WIDTH (SENSI2C_CMD_SCL_WIDTH),
.SENSI2C_CMD_SDA (SENSI2C_CMD_SDA),
.SENSI2C_CMD_SDA_WIDTH (SENSI2C_CMD_SDA_WIDTH)
) sensor_i2c_i ( ) sensor_i2c_i (
.mrst (mrst), // input .mrst (mrst), // input
......
sensor/sensor_i2c_prot.v
View file @ 74db68c1
This diff is collapsed.
sensor/sensor_i2c_scl_sda.v
View file @ 74db68c1
...@@ -21,19 +21,23 @@ ...@@ -21,19 +21,23 @@
`timescale 1ns/1ps `timescale 1ns/1ps
module sensor_i2c_scl_sda( module sensor_i2c_scl_sda(
input mrst, // @ posedge mclk input mrst, // @ posedge mclk
input mclk, // global clock input mclk, // global clock
input i2c_rst, input i2c_rst,
input [ 7:0] i2c_dly, // bit duration-1 (>=2?), 1 unit - 4 mclk periods input [ 7:0] i2c_dly, // bit duration-1 (>=2?), 1 unit - 4 mclk periods
input active_sda, // active pull SDA
input early_release_0,// release SDA immediately after end of SCL if next bit is 1 (for ACKN). Data hold time by slow 0->1
input snd_start, input snd_start,
input snd_stop, input snd_stop,
input snd9, input snd9,
// input rcv, // recieve mode (valid with snd9) - master receives, slave - sends
input [ 8:0] din, input [ 8:0] din,
output [ 8:0] dout, // output [ 8:0] dout, //
output reg dout_stb, // dout contains valid data output reg dout_stb, // dout contains valid data
output reg scl, // i2c SCL signal output reg scl, // i2c SCL signal
input sda_in, // i2c SDA signal form I/O pad input sda_in, // i2c SDA signal form I/O pad
output reg sda, // i2c SDA signal output reg sda, // i2c SDA signal
output reg sda_en, // drive SDA when SDA=0 and during second half of SCL = 0 interval (also during stop)
output ready, // ready to accept commands output ready, // ready to accept commands
output reg bus_busy, // i2c bus busy (1 cycle behind !ready) output reg bus_busy, // i2c bus busy (1 cycle behind !ready)
output is_open // i2c channel is open (started, no stop yet) output is_open // i2c channel is open (started, no stop yet)
...@@ -119,6 +123,14 @@ module sensor_i2c_scl_sda( ...@@ -119,6 +123,14 @@ module sensor_i2c_scl_sda(
seq_start_restart[3] || seq_start_restart[2] || seq_start_restart[3] || seq_start_restart[2] ||
seq_stop[0] || seq_stop[0] ||
(sr[8] && (|seq_bit)); (sr[8] && (|seq_bit));
if (rst) sda_en <= 1;
else if (first_cyc) sda_en <= busy_r && (
(active_sda && (seq_start_restart[3] || seq_stop[0] || (sr[8] && seq_bit[3]))) ||
(|seq_start_restart[1:0]) ||
(|seq_stop[2:1]) ||
(!sr[8] && (|seq_bit[3:1])) ||
(!sr[8] && seq_bit[0] && (!early_release_0 || !sr[7])));
bus_busy <= busy_r; bus_busy <= busy_r;
end end
......
sensor/sensors393.v
View file @ 74db68c1
...@@ -54,18 +54,16 @@ module sensors393 #( ...@@ -54,18 +54,16 @@ module sensors393 #(
// sensor_i2c_io relative control register addresses // sensor_i2c_io relative control register addresses
parameter SENSI2C_CTRL = 'h0, parameter SENSI2C_CTRL = 'h0,
// Control register bits // Control register bits
parameter SENSI2C_CMD_TABLE = 29, // [29]: 1 - write to translation table (ignore any other fields), 0 - write other fields
parameter SENSI2C_CMD_TAND = 28, // [28]: 1 - write table address (8 bits), 0 - write table data (28 bits)
parameter SENSI2C_CMD_RESET = 14, // [14] reset all FIFO (takes 16 clock pulses), also - stops i2c until run command parameter SENSI2C_CMD_RESET = 14, // [14] reset all FIFO (takes 16 clock pulses), also - stops i2c until run command
parameter SENSI2C_CMD_RUN = 13, // [13:12]3 - run i2c, 2 - stop i2c (needed before software i2c), 1,0 - no change to run state parameter SENSI2C_CMD_RUN = 13, // [13:12]3 - run i2c, 2 - stop i2c (needed before software i2c), 1,0 - no change to run state
parameter SENSI2C_CMD_RUN_PBITS = 1, parameter SENSI2C_CMD_RUN_PBITS = 1,
parameter SENSI2C_CMD_BYTES = 11, // if 1, use [10:9] to set command bytes to send after slave address (0..3) parameter SENSI2C_CMD_FIFO_RD = 3, // advane I2C read data FIFO by 1
parameter SENSI2C_CMD_BYTES_PBITS = 2, parameter SENSI2C_CMD_ACIVE = 2, // [2] - SENSI2C_CMD_ACIVE_EARLY0, SENSI2C_CMD_ACIVE_SDA
parameter SENSI2C_CMD_DLY = 8, // [7:0] - duration of quater i2c cycle (if 0, [3:0] control SCL+SDA) parameter SENSI2C_CMD_ACIVE_EARLY0 = 1, // release SDA==0 early if next bit ==1
parameter SENSI2C_CMD_DLY_PBITS = 8, parameter SENSI2C_CMD_ACIVE_SDA = 0, // drive SDA=1 during the second half of SCL=1
parameter SENSI2C_CMD_SCL = 16, // [17:16] : 0: NOP, 1: 1'b0->SCL, 2: 1'b1->SCL, 3: 1'bz -> SCL
parameter SENSI2C_CMD_SCL_WIDTH = 2,
parameter SENSI2C_CMD_SDA = 18, // [19:18] : 0: NOP, 1: 1'b0->SDA, 2: 1'b1->SDA, 3: 1'bz -> SDA,
parameter SENSI2C_CMD_SDA_WIDTH = 2,
parameter SENSI2C_STATUS = 'h1, parameter SENSI2C_STATUS = 'h1,
parameter SENS_SYNC_RADDR = 'h4, parameter SENS_SYNC_RADDR = 'h4,
...@@ -367,7 +365,7 @@ module sensors393 #( ...@@ -367,7 +365,7 @@ module sensors393 #(
.SENS_SYNC_MINPER (SENS_SYNC_MINPER), .SENS_SYNC_MINPER (SENS_SYNC_MINPER),
.SENSOR_NUM_HISTOGRAM (SENSOR_NUM_HISTOGRAM), .SENSOR_NUM_HISTOGRAM (SENSOR_NUM_HISTOGRAM),
.HISTOGRAM_RAM_MODE (HISTOGRAM_RAM_MODE), .HISTOGRAM_RAM_MODE (HISTOGRAM_RAM_MODE),
.SENS_NUM_SUBCHN (SENS_NUM_SUBCHN), .SENS_NUM_SUBCHN (SENS_NUM_SUBCHN),
.SENS_GAMMA_BUFFER (SENS_GAMMA_BUFFER), .SENS_GAMMA_BUFFER (SENS_GAMMA_BUFFER),
.SENSOR_CTRL_RADDR (SENSOR_CTRL_RADDR), .SENSOR_CTRL_RADDR (SENSOR_CTRL_RADDR),
.SENSOR_CTRL_ADDR_MASK (SENSOR_CTRL_ADDR_MASK), .SENSOR_CTRL_ADDR_MASK (SENSOR_CTRL_ADDR_MASK),
...@@ -379,17 +377,15 @@ module sensors393 #( ...@@ -379,17 +377,15 @@ module sensors393 #(
.SENSI2C_CTRL_RADDR (SENSI2C_CTRL_RADDR), .SENSI2C_CTRL_RADDR (SENSI2C_CTRL_RADDR),
.SENSI2C_CTRL_MASK (SENSI2C_CTRL_MASK), .SENSI2C_CTRL_MASK (SENSI2C_CTRL_MASK),
.SENSI2C_CTRL (SENSI2C_CTRL), .SENSI2C_CTRL (SENSI2C_CTRL),
.SENSI2C_CMD_TABLE (SENSI2C_CMD_TABLE),
.SENSI2C_CMD_TAND (SENSI2C_CMD_TAND),
.SENSI2C_CMD_RESET (SENSI2C_CMD_RESET), .SENSI2C_CMD_RESET (SENSI2C_CMD_RESET),
.SENSI2C_CMD_RUN (SENSI2C_CMD_RUN), .SENSI2C_CMD_RUN (SENSI2C_CMD_RUN),
.SENSI2C_CMD_RUN_PBITS (SENSI2C_CMD_RUN_PBITS), .SENSI2C_CMD_RUN_PBITS (SENSI2C_CMD_RUN_PBITS),
.SENSI2C_CMD_BYTES (SENSI2C_CMD_BYTES), .SENSI2C_CMD_FIFO_RD (SENSI2C_CMD_FIFO_RD),
.SENSI2C_CMD_BYTES_PBITS (SENSI2C_CMD_BYTES_PBITS), .SENSI2C_CMD_ACIVE (SENSI2C_CMD_ACIVE),
.SENSI2C_CMD_DLY (SENSI2C_CMD_DLY), .SENSI2C_CMD_ACIVE_EARLY0 (SENSI2C_CMD_ACIVE_EARLY0),
.SENSI2C_CMD_DLY_PBITS (SENSI2C_CMD_DLY_PBITS), .SENSI2C_CMD_ACIVE_SDA (SENSI2C_CMD_ACIVE_SDA),
.SENSI2C_CMD_SCL (SENSI2C_CMD_SCL),
.SENSI2C_CMD_SCL_WIDTH (SENSI2C_CMD_SCL_WIDTH),
.SENSI2C_CMD_SDA (SENSI2C_CMD_SDA),
.SENSI2C_CMD_SDA_WIDTH (SENSI2C_CMD_SDA_WIDTH),
.SENSI2C_STATUS (SENSI2C_STATUS), .SENSI2C_STATUS (SENSI2C_STATUS),
.SENS_GAMMA_RADDR (SENS_GAMMA_RADDR), .SENS_GAMMA_RADDR (SENS_GAMMA_RADDR),
.SENS_GAMMA_ADDR_MASK (SENS_GAMMA_ADDR_MASK), .SENS_GAMMA_ADDR_MASK (SENS_GAMMA_ADDR_MASK),
......
x393.v
View file @ 74db68c1
...@@ -1422,17 +1422,15 @@ assign axi_grst = axi_rst_pre; ...@@ -1422,17 +1422,15 @@ assign axi_grst = axi_rst_pre;
.SENSI2C_CTRL_RADDR (SENSI2C_CTRL_RADDR), .SENSI2C_CTRL_RADDR (SENSI2C_CTRL_RADDR),
.SENSI2C_CTRL_MASK (SENSI2C_CTRL_MASK), .SENSI2C_CTRL_MASK (SENSI2C_CTRL_MASK),
.SENSI2C_CTRL (SENSI2C_CTRL), .SENSI2C_CTRL (SENSI2C_CTRL),
.SENSI2C_CMD_TABLE (SENSI2C_CMD_TABLE),
.SENSI2C_CMD_TAND (SENSI2C_CMD_TAND),
.SENSI2C_CMD_RESET (SENSI2C_CMD_RESET), .SENSI2C_CMD_RESET (SENSI2C_CMD_RESET),
.SENSI2C_CMD_RUN (SENSI2C_CMD_RUN), .SENSI2C_CMD_RUN (SENSI2C_CMD_RUN),
.SENSI2C_CMD_RUN_PBITS (SENSI2C_CMD_RUN_PBITS), .SENSI2C_CMD_RUN_PBITS (SENSI2C_CMD_RUN_PBITS),
.SENSI2C_CMD_BYTES (SENSI2C_CMD_BYTES), .SENSI2C_CMD_FIFO_RD (SENSI2C_CMD_FIFO_RD),
.SENSI2C_CMD_BYTES_PBITS (SENSI2C_CMD_BYTES_PBITS), .SENSI2C_CMD_ACIVE (SENSI2C_CMD_ACIVE),
.SENSI2C_CMD_DLY (SENSI2C_CMD_DLY), .SENSI2C_CMD_ACIVE_EARLY0 (SENSI2C_CMD_ACIVE_EARLY0),
.SENSI2C_CMD_DLY_PBITS (SENSI2C_CMD_DLY_PBITS), .SENSI2C_CMD_ACIVE_SDA (SENSI2C_CMD_ACIVE_SDA),
.SENSI2C_CMD_SCL (SENSI2C_CMD_SCL),
.SENSI2C_CMD_SCL_WIDTH (SENSI2C_CMD_SCL_WIDTH),
.SENSI2C_CMD_SDA (SENSI2C_CMD_SDA),
.SENSI2C_CMD_SDA_WIDTH (SENSI2C_CMD_SDA_WIDTH),
.SENSI2C_STATUS (SENSI2C_STATUS), .SENSI2C_STATUS (SENSI2C_STATUS),
.SENS_SYNC_RADDR (SENS_SYNC_RADDR), .SENS_SYNC_RADDR (SENS_SYNC_RADDR),
.SENS_SYNC_MASK (SENS_SYNC_MASK), .SENS_SYNC_MASK (SENS_SYNC_MASK),
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment