more modules from x393_sata

util_modules/fifo_sameclock_control.v

+/*******************************************************************************
+ * Module: fifo_sameclock_control
+ * Date:2016-01-20  
+ * Author: andrey     
+ * Description: BRAM-based fifo control, uses BARM output registers
+ *
+ * Copyright (c) 2016 Elphel, Inc .
+ * fifo_sameclock_control.v is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ *  fifo_sameclock_control.v is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/> .
+ *******************************************************************************/
+`timescale 1ns/1ps
+
+module  fifo_sameclock_control#(
+    parameter WIDTH = 9
+)(
+    input                  clk,
+    input                  rst,  // clock-sync reset
+    input                  wr,  // write to FIFO (also applied directly to memory)
+    input                  rd,  // read from FIFO, internally masked by nempty
+    output                 nempty,    // at read side 
+    output       [WIDTH:0] fill_in,   // valid at write side, latency 1 for read 
+    output reg [WIDTH-1:0] mem_wa,
+    output reg [WIDTH-1:0] mem_ra,
+    output                 mem_re,
+    output                 mem_regen,
+    output reg             over,
+    output reg             under
+    
+);
+    reg       [WIDTH:0] fill_ram;
+    
+    reg                 ramo_full;
+    reg                 rreg_full;
+    
+    assign mem_regen = mem_regen;
+    
+    assign mem_re = (|fill_ram) && (!ramo_full || !rreg_full || rd);
+    assign mem_regen =   ramo_full && (!rreg_full || rd);
+    assign nempty =    rreg_full;
+    assign fill_in =   fill_ram;
+    
+    always @ (posedge clk) begin
+        if     (rst) mem_wa <= 0;
+        else if (wr) mem_wa <= mem_wa + 1;
+
+        if      (rst)    mem_ra <= 0;
+        else if (mem_re) mem_ra <= mem_ra + 1;
+
+        if      (rst)                fill_ram <= 0;
+        else if (wr ^ mem_re)        fill_ram <= mem_regen ? (fill_ram +1) : (fill_ram - 1);
+
+        if      (rst)                ramo_full <= 0;
+        else if (mem_re ^ mem_regen) ramo_full <= mem_re;
+
+        if      (rst)                           rreg_full <= 0;
+        else if (mem_regen ^ (rd && rreg_full)) rreg_full <= mem_regen;
+        
+        if (rst)                     under <= 0;
+        else                         under <= rd && ! rreg_full;
+        
+        if (rst)                     over <= 0;
+        else                         over <= wr && fill_ram[WIDTH] && !fill_ram[WIDTH-1];
+        
+    end
+
+endmodule
+