Skip to content

X
x393
Commit 4340db45 authored by Andrey Filippov's avatar Andrey Filippov
Browse files
Options

more modules from x393_sata

parent 952b1c1a
Hide whitespace changes
Inline Side-by-side
Showing with 292 additions and 0 deletions
util_modules/fifo_sameclock_control.v 0 → 100644
View file @ 4340db45
/*******************************************************************************
* Module: fifo_sameclock_control
* Date:2016-01-20
* Author: andrey
* Description: BRAM-based fifo control, uses BARM output registers
*
* Copyright (c) 2016 Elphel, Inc .
* fifo_sameclock_control.v is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* fifo_sameclock_control.v is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
`timescale 1ns/1ps
module fifo_sameclock_control#(
parameter WIDTH = 9
)(
input clk,
input rst, // clock-sync reset
input wr, // write to FIFO (also applied directly to memory)
input rd, // read from FIFO, internally masked by nempty
output nempty, // at read side
output [WIDTH:0] fill_in, // valid at write side, latency 1 for read
output reg [WIDTH-1:0] mem_wa,
output reg [WIDTH-1:0] mem_ra,
output mem_re,
output mem_regen,
output reg over,
output reg under
);
reg [WIDTH:0] fill_ram;
reg ramo_full;
reg rreg_full;
assign mem_regen = mem_regen;
assign mem_re = (|fill_ram) && (!ramo_full || !rreg_full || rd);
assign mem_regen = ramo_full && (!rreg_full || rd);
assign nempty = rreg_full;
assign fill_in = fill_ram;
always @ (posedge clk) begin
if (rst) mem_wa <= 0;
else if (wr) mem_wa <= mem_wa + 1;
if (rst) mem_ra <= 0;
else if (mem_re) mem_ra <= mem_ra + 1;
if (rst) fill_ram <= 0;
else if (wr ^ mem_re) fill_ram <= mem_regen ? (fill_ram +1) : (fill_ram - 1);
if (rst) ramo_full <= 0;
else if (mem_re ^ mem_regen) ramo_full <= mem_re;
if (rst) rreg_full <= 0;
else if (mem_regen ^ (rd && rreg_full)) rreg_full <= mem_regen;
if (rst) under <= 0;
else under <= rd && ! rreg_full;
if (rst) over <= 0;
else over <= wr && fill_ram[WIDTH] && !fill_ram[WIDTH-1];
end
endmodule
wrap/ramt_var_wb_var_r.v 0 → 100644
View file @ 4340db45
/*******************************************************************************
* Module: ramt_var_wb_var_r
* Date:2015-05-29
* Author: Andrey Filippov
* Description: Dual port memory wrapper, with variable width write (with mask) and variable
* width read, using "TDP" mode of RAMB36E1. Same R/W widths in each port.
* Does not use parity bits to increase total data width, width down to 1 are valid.
*
* Copyright (c) 2015 Elphel, Inc.
* ramt_var_wb_var_r.v is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* ramt_var_wb_var_r.v is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*
* Additional permission under GNU GPL version 3 section 7:
* If you modify this Program, or any covered work, by linking or combining it
* with independent modules provided by the FPGA vendor only (this permission
* does not extend to any 3-rd party modules, "soft cores" or macros) under
* different license terms solely for the purpose of generating binary "bitstream"
* files and/or simulating the code, the copyright holders of this Program give
* you the right to distribute the covered work without those independent modules
* as long as the source code for them is available from the FPGA vendor free of
* charge, and there is no dependence on any encrypted modules for simulating of
* the combined code. This permission applies to you if the distributed code
* contains all the components and scripts required to completely simulate it
* with at least one of the Free Software programs.
*******************************************************************************/
`timescale 1ns/1ps
`include "system_defines.vh"
/*
Address/data widths
Connect unused data to 1b0, unused addresses - to 1'b1
RAMB18E1 in True Dual Port (TDP) Mode - each port individually
+-----------+---------+---------+---------+
|Data Width | Address | Data | Parity |
+-----------+---------+---------+---------+
| 1 | A[13:0] | D[0] | --- |
| 2 | A[13:1] | D[1:0] | --- |
| 4 | A[13:2] | D[3:0[ | --- |
| 9 | A[13:3] | D[7:0] | DP[0] |
| 18 | A[13:4] | D[15:0] | DP[1:0] |
+-----------+---------+---------+---------+
RAMB18E1 in Simple Dual Port (SDP) Mode
one of the ports (r or w) - 32/36 bits, other - variable
+------------+---------+---------+---------+
|Data Widths | Address | Data | Parity |
+------------+---------+---------+---------+
| 32/ 1 | A[13:0] | D[0] | --- |
| 32/ 2 | A[13:1] | D[1:0] | --- |
| 32/ 4 | A[13:2] | D[3:0[ | --- |
| 36/ 9 | A[13:3] | D[7:0] | DP[0] |
| 36/ 18 | A[13:4] | D[15:0] | DP[1:0] |
| 36/ 36 | A[13:5] | D[31:0] | DP[3:0] |
+------------+---------+---------+---------+
RAMB36E1 in True Dual Port (TDP) Mode - each port individually
+-----------+---------+---------+---------+
|Data Width | Address | Data | Parity |
+-----------+---------+---------+---------+
| 1 | A[14:0] | D[0] | --- |
| 2 | A[14:1] | D[1:0] | --- |
| 4 | A[14:2] | D[3:0[ | --- |
| 9 | A[14:3] | D[7:0] | DP[0] |
| 18 | A[14:4] | D[15:0] | DP[1:0] |
| 36 | A[14:5] | D[31:0] | DP[3:0] |
|1(Cascade) | A[15:0] | D[0] | --- |
+-----------+---------+---------+---------+
RAMB36E1 in Simple Dual Port (SDP) Mode
one of the ports (r or w) - 64/72 bits, other - variable
+------------+---------+---------+---------+
|Data Widths | Address | Data | Parity |
+------------+---------+---------+---------+
| 64/ 1 | A[14:0] | D[0] | --- |
| 64/ 2 | A[14:1] | D[1:0] | --- |
| 64/ 4 | A[14:2] | D[3:0[ | --- |
| 64/ 9 | A[14:3] | D[7:0] | DP[0] |
| 64/ 18 | A[14:4] | D[15:0] | DP[1:0] |
| 64/ 36 | A[14:5] | D[31:0] | DP[3:0] |
| 64/ 72 | A[14:6] | D[63:0] | DP[7:0] |
+------------+---------+---------+---------+
*/
module ramt_var_wb_var_r
#(
parameter integer REGISTERS_A = 0, // 1 - registered output
parameter integer REGISTERS_B = 0, // 1 - registered output
parameter integer LOG2WIDTH_A = 5, // WIDTH= 9 << (LOG2WIDTH - 3)
parameter integer LOG2WIDTH_B = 5, // WIDTH= 9 << (LOG2WIDTH - 3)
parameter WRITE_MODE_A = "NO_CHANGE", //Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE"
parameter WRITE_MODE_B = "NO_CHANGE" //Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE"
`ifdef PRELOAD_BRAMS
,
`include "includes/ram36_declare_init.vh"
`endif
)(
input clk_a, // clock for port A
input [14-LOG2WIDTH_A:0] addr_a, // address port A
input en_a, // enable port A (read and write)
input regen_a, // output register enable port A
// input [((LOG2WIDTH_A > 3)? (LOG2WIDTH_A-3):0):0] we_a, // write port enable port A
input [((LOG2WIDTH_A > 3)? ((LOG2WIDTH_A > 4)?3:1):0):0] we_a, // write port enable port A
output [(1 << LOG2WIDTH_A)-1:0] data_out_a,// data out port A
input [(1 << LOG2WIDTH_A)-1:0] data_in_a, // data in port A
input clk_b, // clock for port BA
input [14-LOG2WIDTH_B:0] addr_b, // address port B
input en_b, // read enable port B
input regen_b, // output register enable port B
// input [((LOG2WIDTH_B > 3)? (LOG2WIDTH_B-3):0):0] we_b, // write port enable port B
input [((LOG2WIDTH_B > 3)? ((LOG2WIDTH_B > 4)?3:1):0):0] we_b, // write port enable port B
output [(1 << LOG2WIDTH_B)-1:0] data_out_b,// data out port B
input [(1 << LOG2WIDTH_B)-1:0] data_in_b // data in port B
);
localparam PWIDTH_A = (LOG2WIDTH_A > 2)? (9 << (LOG2WIDTH_A - 3)): (1 << LOG2WIDTH_A);
localparam PWIDTH_B = (LOG2WIDTH_B > 2)? (9 << (LOG2WIDTH_B - 3)): (1 << LOG2WIDTH_B);
localparam WIDTH_A = 1 << LOG2WIDTH_A;
localparam WIDTH_B = 1 << LOG2WIDTH_B;
wire [31:0] data_out32_a;
assign data_out_a=data_out32_a[WIDTH_A-1:0];
wire [31:0] data_out32_b;
assign data_out_b=data_out32_b[WIDTH_B-1:0];
wire [WIDTH_A+31:0] data_in_ext_a = {32'b0,data_in_a[WIDTH_A-1:0]};
wire [31:0] data_in32_a = data_in_ext_a[31:0];
wire [WIDTH_B+31:0] data_in_ext_b = {32'b0,data_in_b[WIDTH_B-1:0]};
wire [31:0] data_in32_b = data_in_ext_b[31:0];
wire [3:0] we_a4= (LOG2WIDTH_A > 3)? ((LOG2WIDTH_A > 4)? we_a : {2{we_a}} ):{4{we_a}};
wire [3:0] we_b4= (LOG2WIDTH_B > 3)? ((LOG2WIDTH_B > 4)? we_a : {2{we_b}} ):{4{we_b}};
RAMB36E1
#(
.RSTREG_PRIORITY_A ("RSTREG"), // Valid: "RSTREG" or "REGCE"
.RSTREG_PRIORITY_B ("RSTREG"), // Valid: "RSTREG" or "REGCE"
.DOA_REG (REGISTERS_A), // Valid: 0 (no output registers) and 1 - one output register (in SDP - to lower 36)
.DOB_REG (REGISTERS_B), // Valid: 0 (no output registers) and 1 - one output register (in SDP - to lower 36)
.RAM_EXTENSION_A ("NONE"), // Cascading, valid: "NONE","UPPER", LOWER"
.RAM_EXTENSION_B ("NONE"), // Cascading, valid: "NONE","UPPER", LOWER"
.READ_WIDTH_A (PWIDTH_A), // Valid: 0,1,2,4,9,18,36 and in SDP mode - 72 (should be 0 if port is not used)
.READ_WIDTH_B (PWIDTH_B), // Valid: 0,1,2,4,9,18,36 and in SDP mode - 72 (should be 0 if port is not used)
.WRITE_WIDTH_A (PWIDTH_A), // Valid: 0,1,2,4,9,18,36 and in SDP mode - 72 (should be 0 if port is not used)
.WRITE_WIDTH_B (PWIDTH_B), // Valid: 0,1,2,4,9,18,36 and in SDP mode - 72 (should be 0 if port is not used)
.RAM_MODE ("TDP"), // Valid "TDP" (true dual-port) and "SDP" - simple dual-port
.WRITE_MODE_A (WRITE_MODE_A), // Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE"
.WRITE_MODE_B (WRITE_MODE_B), // Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE"
.RDADDR_COLLISION_HWCONFIG ("DELAYED_WRITE"),// Valid: "DELAYED_WRITE","PERFORMANCE" (no access to the same page)
.SIM_COLLISION_CHECK ("ALL"), // Valid: "ALL", "GENERATE_X_ONLY", "NONE", and "WARNING_ONLY"
.INIT_FILE ("NONE"), // "NONE" or filename with initialization data
.SIM_DEVICE ("7SERIES"), // Simulation device family - "VIRTEX6", "VIRTEX5" and "7_SERIES" // "7SERIES"
.EN_ECC_READ ("FALSE"), // Valid:"FALSE","TRUE" (ECC decoder circuitry)
.EN_ECC_WRITE ("FALSE") // Valid:"FALSE","TRUE" (ECC decoder circuitry)
`ifdef PRELOAD_BRAMS
`include "includes/ram36_pass_init.vh"
`endif
) RAMB36E1_i
(
// Port A (Read port in SDP mode):
.DOADO (data_out32_a), // Port A data/LSB data[31:0], output
.DOPADOP (), // Port A parity/LSB parity[3:0], output
.DIADI (data_in32_a), // Port A data/LSB data[31:0], input
.DIPADIP (4'b0), // Port A parity/LSB parity[3:0], input
.ADDRARDADDR ({1'b1,addr_a,{LOG2WIDTH_A{1'b1}}}), // Port A (read port in SDP) address [15:0]. used from [14] down, unused should be high, input
.CLKARDCLK (clk_a), // Port A (read port in SDP) clock, input
.ENARDEN (en_a), // Port A (read port in SDP) Enable, input
.REGCEAREGCE (regen_a), // Port A (read port in SDP) register enable, input
.RSTRAMARSTRAM (1'b0), // Port A (read port in SDP) set/reset, input
.RSTREGARSTREG (1'b0), // Port A (read port in SDP) register set/reset, input
.WEA (we_a4), // Port A (read port in SDP) Write Enable[3:0], input
// Port B
.DOBDO (data_out32_b), // Port B data/MSB data[31:0], output
.DOPBDOP (), // Port B parity/MSB parity[3:0], output
.DIBDI (data_in32_b), // Port B data/MSB data[31:0], input
.DIPBDIP (4'b0), // Port B parity/MSB parity[3:0], input
.ADDRBWRADDR ({1'b1,addr_b,{LOG2WIDTH_B{1'b1}}}), // Port B (write port in SDP) address [15:0]. used from [14] down, unused should be high, input
.CLKBWRCLK (clk_b), // Port B (write port in SDP) clock, input
.ENBWREN (en_b), // Port B (write port in SDP) Enable, input
.REGCEB (regen_b), // Port B (write port in SDP) register enable, input
.RSTRAMB (1'b0), // Port B (write port in SDP) set/reset, input
.RSTREGB (1'b0), // Port B (write port in SDP) register set/reset, input
.WEBWE ({4'b0,we_b4}),// Port B (write port in SDP) Write Enable[7:0], input
// Error correction circuitry
.SBITERR (), // Single bit error status, output
.DBITERR (), // Double bit error status, output
.ECCPARITY (), // Genearted error correction parity [7:0], output
.RDADDRECC (), // ECC read address[8:0], output
.INJECTSBITERR (1'b0), // inject a single-bit error, input
.INJECTDBITERR (1'b0), // inject a double-bit error, input
// Cascade signals to create 64Kx1
.CASCADEOUTA (), // A-port cascade, output
.CASCADEOUTB (), // B-port cascade, output
.CASCADEINA (1'b0), // A-port cascade, input
.CASCADEINB (1'b0) // B-port cascade, input
);
endmodule
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment