Commit ad7ab50d authored by Oleg Dzhimiev's avatar Oleg Dzhimiev

Update README.md

parent 22cdf528
Pipeline #1076 canceled with stages
...@@ -4,6 +4,12 @@ Simple custom firmware for KTNNKG wifi 30A module. ...@@ -4,6 +4,12 @@ Simple custom firmware for KTNNKG wifi 30A module.
Connects as client to the provided wifi hotspot (must be IEEE802.11 b/g/n (2.4MHz)) with a hardcoded ip address. Connects as client to the provided wifi hotspot (must be IEEE802.11 b/g/n (2.4MHz)) with a hardcoded ip address.
Simple - does not need extra servers or smartphone app.
Not secure.
Code pieces are taken from here and there while looking through ESP8266 programming guides and tutorias.
## hardware setup ## hardware setup
* WIFI module is marked as PSF-B01 * WIFI module is marked as PSF-B01
...@@ -12,7 +18,7 @@ Connects as client to the provided wifi hotspot (must be IEEE802.11 b/g/n (2.4MH ...@@ -12,7 +18,7 @@ Connects as client to the provided wifi hotspot (must be IEEE802.11 b/g/n (2.4MH
* Programming cable - [this one](https://www.amazon.com/gp/product/B07784SHF7/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1) with 3.3V used for VCC * Programming cable - [this one](https://www.amazon.com/gp/product/B07784SHF7/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1) with 3.3V used for VCC
## build and upload ## build and upload
Arduino 1.8.9: Arduino 1.8.9 (download libs for ESP32):
* Board: **Generic ESP8285 Module** * Board: **Generic ESP8285 Module**
* Upload speed: **921600** * Upload speed: **921600**
* CPU frequency: **80 MHz** * CPU frequency: **80 MHz**
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment