1. 09 May, 2014 1 commit
  2. 04 May, 2014 1 commit
  3. 03 May, 2014 1 commit
    • Dick Hollenbeck's avatar
      Modular-Kicad milestone B), major portions: · 25d1ab40
      Dick Hollenbeck authored
      *) Rework the set language support, simplify it by using KIWAY.  Now any major
         frame with a "change language" menu can change the language for all KIWAY_PLAYERs
         in the whole KIWAY.  Multiple KIWAYs are not supported yet.
      
      *) Simplify "modal wxFrame" support, and add that support exclusively to
         KIWAY_PLAYER where it is inherited by all derivatives.  The function
         KIWAY_PLAYER::ShowModal() is in the vtable and so is cross module capable.
      
      *) Remove the requirements and assumptions that the wxFrame hierarchy always
         had PCB_EDIT_FRAME and SCH_EDIT_FRAME as immediate parents of their viewers
         and editors. This is no longer the case, nor required.
      
      *) Use KIWAY::Player() everywhere to make KIWAY_PLAYERs, this registers the
         KIWAY_PLAYER within the KIWAY and makes it very easy to find an open frame
         quickly.  It also gives control to the KIWAY as to frame hierarchical
         relationships.
      
      *) Change single_top to use the KIWAY for loading a KIFACE and instantiating
         the single KIWAY_PLAYER, see bullet immediately above.
      
      *) Add KIWAY::OnKiwayEnd() and call it from PGM_BASE at program termination, this
         gives the KIFACEs a chance to save their final configuration dope to disk.
      
      *) Add dedicated FRAME_T's for the modal frames, so m_Ident can be tested and
         these modal frames are distinctly different than their non-modal equivalents.
         KIWAY_PLAYER::IsModal() is !not! a valid test during the wxFrame's constructor,
         so this is another important reason for having a dedicated FRAME_T for each
         modal wxFrame.
      
      On balance, more lines were deleted than were added to achieve all this.
      25d1ab40
  4. 30 Apr, 2014 1 commit
  5. 19 Apr, 2014 1 commit
    • Dick Hollenbeck's avatar
      *) Switch kicad.exe to using KIFACE modules for all major top level windows. · 0d6560a2
      Dick Hollenbeck authored
          Eeschema, Pcbnew, and Cvpcb all run under the same process now,
          FOR THE VERY FIRST TIME!
      
      *)  Added KIWAY::PlayerCreate(), PlayerClose(), and PlayersClose().
      
      *)  Factored FRAME_T into <frame_type.h> from ID_DRAWFRAME_TYPE.
      
      *)  Found that the following command line is helpful for collecting all the *.kiface
          files into the <build>/kicad/ directory so that kicad can find them.
      
            $ cp `find . -name '*.kiface'` kicad/
      
          Maybe somebody will want to rework how the CMake files are organized so all
          the binaries can go into the same place.  See python-a-mingw-us.
      
      *)  This might fix the problem on the Mac where child process windows were not
          coming to the front.  See ->Raise() in kicad/mainframe.cpp.
      
      *)  You can set USE_KIFACE to 0 in kicad/mainframe.cpp to chain load child exes
          instead of using the KIFACE modules directly, i.e. revert.
      0d6560a2
  6. 18 Apr, 2014 1 commit
    • Dick Hollenbeck's avatar
      *) Add KIFACE_I::StartFlags() and IsSingle() so a KIFACE implementation can know · 5f65d0da
      Dick Hollenbeck authored
          if it is running under single_top.cpp or under a project manager.
      
      *)  Test Kiface().IsSingle() when adding menus, some operations are not permitted
          when running under a project manager and the KIWAY_PLAYER is pegged to a
          specific project.
      
      *)  Implemented KIWAY::KiFACE() so it loads *.kiface files.  They still have to be
          in the same directory as the main *.exe launcher, so this presents some difficulty
          when the binaries are not yet installed but rather the *.kiface files are still
          in their original build directories.  For today, I simply copied _pcbnew.kiface
          to build/kicad/.
      
      *)  Add a test case to kicad/mainframe.cpp just to get an early peek at loading
          _pcbnew.kiface under the C++ project manager.  Got that working for one
          specific invocation just for proof of concept.  Surprise, it works.
      5f65d0da
  7. 03 Apr, 2014 1 commit
  8. 22 Mar, 2014 2 commits
  9. 20 Mar, 2014 1 commit
    • Dick Hollenbeck's avatar
      * KIWAY Milestone A): Make major modules into DLL/DSOs. · 2c67c3ff
      Dick Hollenbeck authored
      !   The initial testing of this commit should be done using a Debug build so that
          all the wxASSERT()s are enabled.  Also, be sure and keep enabled the
          USE_KIWAY_DLLs option.  The tree won't likely build without it.  Turning it
          off is senseless anyways.  If you want stable code, go back to a prior version,
          the one tagged with "stable".
      
      *   Relocate all functionality out of the wxApp derivative into more finely
          targeted purposes:
          a) DLL/DSO specific
          b) PROJECT specific
          c) EXE or process specific
          d) configuration file specific data
          e) configuration file manipulations functions.
      
          All of this functionality was blended into an extremely large wxApp derivative
          and that was incompatible with the desire to support multiple concurrently
          loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
          An amazing amount of organization come from simply sorting each bit of
          functionality into the proper box.
      
      *   Switch to wxConfigBase from wxConfig everywhere except instantiation.
      *   Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
          PGM_SINGLE_TOP,
      *   Remove "Return" prefix on many function names.
      *   Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
      *   Fix building boost for use in a DSO on linux.
      *   Remove some of the assumptions in the CMakeLists.txt files that windows had
          to be the host platform when building windows binaries.
      *   Reduce the number of wxStrings being constructed at program load time via
          static construction.
      *   Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
          these functions are useful even when the wxConfigBase comes from another
          source, as is the case in the KICAD_MANAGER_FRAME.
      *   Move the setting of the KIPRJMOD environment variable into class PROJECT,
          so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
      *   Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
          its child wxFrames and wxDialogs now have a Kiway() member function which
          returns a KIWAY& that that window tree branch is in support of.  This is like
          wxWindows DNA in that child windows get this member with proper value at time
          of construction.
      *   Anticipate some of the needs for milestones B) and C) and make code
          adjustments now in an effort to reduce work in those milestones.
      *   No testing has been done for python scripting, since milestone C) has that
          being largely reworked and re-thought-out.
      2c67c3ff
  10. 07 Feb, 2014 1 commit
  11. 03 Feb, 2014 1 commit
  12. 02 Feb, 2014 1 commit
  13. 29 Jan, 2014 1 commit
  14. 28 Jan, 2014 1 commit
  15. 08 Jan, 2014 1 commit
  16. 31 Dec, 2013 1 commit
  17. 29 Dec, 2013 1 commit
  18. 18 Dec, 2013 1 commit
  19. 24 Nov, 2013 1 commit
  20. 15 Nov, 2013 1 commit
  21. 04 Oct, 2013 1 commit
  22. 29 Sep, 2013 1 commit
  23. 10 Sep, 2013 1 commit
  24. 03 Aug, 2013 1 commit
  25. 29 Jun, 2013 1 commit
  26. 28 Jun, 2013 1 commit
  27. 27 Jun, 2013 1 commit
  28. 26 May, 2013 1 commit
  29. 22 May, 2013 1 commit
  30. 18 May, 2013 1 commit
  31. 13 May, 2013 1 commit
  32. 07 May, 2013 1 commit
    • Lorenzo Marcantonio's avatar
      Removed some spurious float casts · 69b7c2a1
      Lorenzo Marcantonio authored
      (explanation: float is implicitly promoted to double anyway, it's only useful
      for storage; also a fp variable forces conversion of other int in the expression
      without needing a cast)
      Typo fixes in some comments 'floatting' -> 'floating' :D
      69b7c2a1
  33. 05 May, 2013 1 commit
    • Lorenzo Marcantonio's avatar
      Migrated the interfaces accepting angles to the double type · d00c83cd
      Lorenzo Marcantonio authored
      The plan goes like this:
      - eeschema still uses int in decidegrees
      - all the other things internally use double in decidegrees (or radians
        in temporaries)
      - in pcbnew UI the unit is *still* int in decidegrees
      
      The idea is to have better precision everywhere while keeping the user with int i
      angles. Hopefully, if a fractional angle doesn't come in from the outside, everything
      should *look* like an integer angle (unless I forgot something and it broke)
      
      When the time comes, simply updating the UI for allowing doubles from the user should
      be enough to get arbitrary angles in pcbnew.
      d00c83cd
  34. 04 May, 2013 1 commit
  35. 02 May, 2013 1 commit
  36. 01 May, 2013 1 commit
    • Lorenzo Marcantonio's avatar
      Angle and distances cleanup (preparing for angles in doubles) · 0e903dba
      Lorenzo Marcantonio authored
      - Removed spurious int casts (these are truncated anyway and will break
        doubles)
      
      - Applied the Distance, GetLineLength, EuclideanNorm, DEG2RAD, RAD2DEG
        ArcTangente and NORMALIZE* functions where possible
      
      - ArcTangente now returns double and handles the 0,0 case like atan2, so
        it's no longer necessary to check for it before calling
      
      - Small functions in trigo moved as inline
      0e903dba
  37. 18 Apr, 2013 1 commit
  38. 10 Apr, 2013 1 commit
  39. 09 Apr, 2013 1 commit