Skip to content

K
kicad-source-mirror
Commit 25d1ab40 authored by Dick Hollenbeck's avatar Dick Hollenbeck
Browse files
Options

Modular-Kicad milestone B), major portions: 

*) Rework the set language support, simplify it by using KIWAY.  Now any major
   frame with a "change language" menu can change the language for all KIWAY_PLAYERs
   in the whole KIWAY.  Multiple KIWAYs are not supported yet.

*) Simplify "modal wxFrame" support, and add that support exclusively to
   KIWAY_PLAYER where it is inherited by all derivatives.  The function
   KIWAY_PLAYER::ShowModal() is in the vtable and so is cross module capable.

*) Remove the requirements and assumptions that the wxFrame hierarchy always
   had PCB_EDIT_FRAME and SCH_EDIT_FRAME as immediate parents of their viewers
   and editors. This is no longer the case, nor required.

*) Use KIWAY::Player() everywhere to make KIWAY_PLAYERs, this registers the
   KIWAY_PLAYER within the KIWAY and makes it very easy to find an open frame
   quickly.  It also gives control to the KIWAY as to frame hierarchical
   relationships.

*) Change single_top to use the KIWAY for loading a KIFACE and instantiating
   the single KIWAY_PLAYER, see bullet immediately above.

*) Add KIWAY::OnKiwayEnd() and call it from PGM_BASE at program termination, this
   gives the KIFACEs a chance to save their final configuration dope to disk.

*) Add dedicated FRAME_T's for the modal frames, so m_Ident can be tested and
   these modal frames are distinctly different than their non-modal equivalents.
   KIWAY_PLAYER::IsModal() is !not! a valid test during the wxFrame's constructor,
   so this is another important reason for having a dedicated FRAME_T for each
   modal wxFrame.

On balance, more lines were deleted than were added to achieve all this.
parent c698a1da
Hide whitespace changes
Inline Side-by-side
Showing with 767 additions and 846 deletions
bitmap2component/CMakeLists.txt
View file @ 25d1ab40
......@@ -14,7 +14,7 @@ set( BITMAP2COMPONENT_SRCS
)
set_source_files_properties( ../common/single_top.cpp PROPERTIES
COMPILE_DEFINITIONS "TOP_FRAME=0"
COMPILE_DEFINITIONS "TOP_FRAME=FRAME_BM2CMP"
)
set_source_files_properties( bitmap2cmp_gui.cpp PROPERTIES
COMPILE_DEFINITIONS "COMPILING_DLL"
......
common/basicframe.cpp
View file @ 25d1ab40
......@@ -169,12 +169,8 @@ void EDA_BASE_FRAME::ReCreateMenuBar()
}
void EDA_BASE_FRAME::SetLanguage( wxCommandEvent& event )
void EDA_BASE_FRAME::ShowChangedLanguage()
{
int id = event.GetId();
Pgm().SetLanguageIdentifier( id );
Pgm().SetLanguage();
ReCreateMenuBar();
GetMenuBar()->Refresh();
}
......@@ -717,27 +713,3 @@ void EDA_BASE_FRAME::CheckForAutoSaveFile( const wxFileName& aFileName,
}
}
void EDA_BASE_FRAME::SetModalMode( bool aModal )
{
// Disable all other windows
#if wxCHECK_VERSION(2, 9, 4)
if( IsTopLevel() )
{
wxWindowList::compatibility_iterator node = wxTopLevelWindows.GetFirst();
while( node )
{
wxWindow* win = node->GetData();
if( win != this )
win->Enable( !aModal );
node = node->GetNext();
}
}
#else
// Deprecated since wxWidgets 2.9.4
MakeModal( aModal );
#endif
}
common/colors.cpp
View file @ 25d1ab40
......@@ -122,6 +122,7 @@ EDA_COLOR_T ColorMix( EDA_COLOR_T aColor1, EDA_COLOR_T aColor2 )
// First easy thing: a black gives always the other colour
if( aColor1 == BLACK )
return aColor2;
if( aColor2 == BLACK)
return aColor1;
......
common/draw_frame.cpp
View file @ 25d1ab40
......@@ -556,12 +556,6 @@ bool EDA_DRAW_FRAME::HandleBlockEnd( wxDC* DC )
}
void EDA_DRAW_FRAME::SetLanguage( wxCommandEvent& event )
{
EDA_BASE_FRAME::SetLanguage( event );
}
void EDA_DRAW_FRAME::UpdateStatusBar()
{
wxString Line;
......
common/fpid.cpp
View file @ 25d1ab40
......@@ -62,6 +62,7 @@ const char* EndsWithRev( const char* start, const char* tail, char separator )
}
#if 0 // Not used
int RevCmp( const char* s1, const char* s2 )
{
int r = strncmp( s1, s2, 3 );
......@@ -76,6 +77,7 @@ int RevCmp( const char* s1, const char* s2 )
return -(rnum1 - rnum2); // swap the sign, higher revs first
}
#endif
//----<Policy and field test functions>-------------------------------------
......@@ -116,7 +118,7 @@ void FPID::clear()
}
int FPID::Parse( const std::string& aId )
int FPID::Parse( const UTF8& aId )
{
clear();
......@@ -171,12 +173,6 @@ int FPID::Parse( const std::string& aId )
}
int FPID::Parse( const wxString& aId )
{
return Parse( std::string( TO_UTF8( aId ) ) );
}
FPID::FPID( const std::string& aId ) throw( PARSE_ERROR )
{
int offset = Parse( aId );
......@@ -194,14 +190,14 @@ FPID::FPID( const std::string& aId ) throw( PARSE_ERROR )
FPID::FPID( const wxString& aId ) throw( PARSE_ERROR )
{
std::string id = TO_UTF8( aId );
UTF8 id = aId;
int offset = Parse( id );
if( offset != -1 )
{
THROW_PARSE_ERROR( _( "Illegal character found in FPID string" ),
wxString::FromUTF8( id.c_str() ),
aId,
id.c_str(),
0,
offset );
......@@ -209,7 +205,7 @@ FPID::FPID( const wxString& aId ) throw( PARSE_ERROR )
}
int FPID::SetLibNickname( const std::string& aLogical )
int FPID::SetLibNickname( const UTF8& aLogical )
{
int offset = okLogical( aLogical );
......@@ -222,15 +218,9 @@ int FPID::SetLibNickname( const std::string& aLogical )
}
int FPID::SetLibNickname( const wxString& aLogical )
int FPID::SetFootprintName( const UTF8& aFootprintName )
{
return SetLibNickname( std::string( TO_UTF8( aLogical ) ) );
}
int FPID::SetFootprintName( const std::string& aFootprintName )
{
int separation = int( aFootprintName.find_first_of( "/" ) );
int separation = int( aFootprintName.find_first_of( "/" ) );
if( separation != -1 )
{
......@@ -246,13 +236,7 @@ int FPID::SetFootprintName( const std::string& aFootprintName )
}
int FPID::SetFootprintName( const wxString& aFootprintName )
{
return SetFootprintName( std::string( TO_UTF8( aFootprintName ) ) );
}
int FPID::SetRevision( const std::string& aRevision )
int FPID::SetRevision( const UTF8& aRevision )
{
int offset = okRevision( aRevision );
......@@ -301,8 +285,10 @@ UTF8 FPID::GetFootprintNameAndRev() const
}
UTF8 FPID::Format( const std::string& aLogicalLib, const std::string& aFootprintName,
const std::string& aRevision )
#if 0 // this is broken, it does not output aFootprintName for some reason
UTF8 FPID::Format( const UTF8& aLogicalLib, const UTF8& aFootprintName,
const UTF8& aRevision )
throw( PARSE_ERROR )
{
UTF8 ret;
......@@ -344,6 +330,7 @@ UTF8 FPID::Format( const std::string& aLogicalLib, const std::string& aFootprint
return ret;
}
#endif
int FPID::compare( const FPID& aFPID ) const
......
common/kiway.cpp
View file @ 25d1ab40
......@@ -23,14 +23,16 @@
*/
#include <string.h>
#include <wx/debug.h>
#include <wx/stdpaths.h>
#include <macros.h>
#include <kiway.h>
#include <kiway_player.h>
#include <kiway_express.h>
#include <pgm_base.h>
#include <config.h>
#include <wx/debug.h>
#include <wx/stdpaths.h>
#include <id.h>
KIFACE* KIWAY::m_kiface[KIWAY_FACE_COUNT];
......@@ -38,22 +40,24 @@ int KIWAY::m_kiface_version[KIWAY_FACE_COUNT];
KIWAY::KIWAY( PGM_BASE* aProgram, wxFrame* aTop ):
KIWAY::KIWAY( PGM_BASE* aProgram, int aCtlBits, wxFrame* aTop ):
m_program( aProgram ),
m_ctl( aCtlBits ),
m_top( 0 )
{
SetTop( aTop ); // hook playerDestroyHandler() into aTop.
SetTop( aTop ); // hook player_destroy_handler() into aTop.
memset( m_player, 0, sizeof( m_player ) );
}
// Any event types derived from wxCommandEvt, like wxWindowDestroyEvent, are
// propogated upwards to parent windows if not handled below. Therefor the
// m_top window should receive all wxWindowDestroyEvents originating from
// KIWAY_PLAYERs. It does anyways, but now playerDestroyHandler eavesdrops
// KIWAY_PLAYERs. It does anyways, but now player_destroy_handler eavesdrops
// on that event stream looking for KIWAY_PLAYERs being closed.
void KIWAY::playerDestroyHandler( wxWindowDestroyEvent& event )
void KIWAY::player_destroy_handler( wxWindowDestroyEvent& event )
{
wxWindow* w = event.GetWindow();
......@@ -62,7 +66,7 @@ void KIWAY::playerDestroyHandler( wxWindowDestroyEvent& event )
// if destroying one of our flock, then mark it as deceased.
if( (wxWindow*) m_player[i] == w )
{
// DBG(printf( "%s: marking m_player[%d] as destroyed\n", __func__, i );)
DBG(printf( "%s: marking m_player[%d] as destroyed\n", __func__, i );)
m_player[i] = 0;
}
}
......@@ -73,12 +77,12 @@ void KIWAY::SetTop( wxFrame* aTop )
{
if( m_top )
{
m_top->Disconnect( wxEVT_DESTROY, wxWindowDestroyEventHandler( KIWAY::playerDestroyHandler ), NULL, this );
m_top->Disconnect( wxEVT_DESTROY, wxWindowDestroyEventHandler( KIWAY::player_destroy_handler ), NULL, this );
}
if( aTop )
{
aTop->Connect( wxEVT_DESTROY, wxWindowDestroyEventHandler( KIWAY::playerDestroyHandler ), NULL, this );
aTop->Connect( wxEVT_DESTROY, wxWindowDestroyEventHandler( KIWAY::player_destroy_handler ), NULL, this );
}
m_top = aTop;
......@@ -91,13 +95,13 @@ const wxString KIWAY::dso_full_path( FACE_T aFaceId )
switch( aFaceId )
{
case FACE_SCH: name = KIFACE_PREFIX wxT( "eeschema" ); break;
case FACE_PCB: name = KIFACE_PREFIX wxT( "pcbnew" ); break;
case FACE_CVPCB: name = KIFACE_PREFIX wxT( "cvpcb" ); break;
case FACE_GERBVIEW: name = KIFACE_PREFIX wxT( "gerbview" ); break;
case FACE_PL_EDITOR: name = KIFACE_PREFIX wxT( "pl_editor" ); break;
// case FACE_PCB_CALCULATOR: who knows.
case FACE_SCH: name = KIFACE_PREFIX wxT( "eeschema" ); break;
case FACE_PCB: name = KIFACE_PREFIX wxT( "pcbnew" ); break;
case FACE_CVPCB: name = KIFACE_PREFIX wxT( "cvpcb" ); break;
case FACE_GERBVIEW: name = KIFACE_PREFIX wxT( "gerbview" ); break;
case FACE_PL_EDITOR: name = KIFACE_PREFIX wxT( "pl_editor" ); break;
case FACE_PCB_CALCULATOR: name = KIFACE_PREFIX wxT( "pcb_calculator" ); break;
case FACE_BMP2CMP: name = KIFACE_PREFIX wxT( "bitmap2component" ); break;
default:
wxASSERT_MSG( 0, wxT( "caller has a bug, passed a bad aFaceId" ) );
......@@ -172,7 +176,7 @@ KIFACE* KIWAY::KiFACE( FACE_T aFaceId, bool doLoad )
// Give the DSO a single chance to do its "process level" initialization.
// "Process level" specifically means stay away from any projects in there.
if( kiface->OnKifaceStart( m_program, KFCTL_PROJECT_SUITE ) )
if( kiface->OnKifaceStart( m_program, m_ctl ) )
{
// Tell dso's wxDynamicLibrary destructor not to Unload() the program image.
(void) dso.Detach();
......@@ -214,12 +218,14 @@ KIWAY::FACE_T KIWAY::KifaceType( FRAME_T aFrameType )
case FRAME_SCH:
case FRAME_SCH_LIB_EDITOR:
case FRAME_SCH_VIEWER:
case FRAME_SCH_VIEWER_MODAL:
return FACE_SCH;
case FRAME_PCB:
case FRAME_PCB_MODULE_EDITOR:
case FRAME_PCB_MODULE_VIEWER:
case FRAME_PCB_FOOTPRINT_WIZARD:
case FRAME_PCB_MODULE_VIEWER_MODAL:
case FRAME_PCB_FOOTPRINT_WIZARD_MODAL:
case FRAME_PCB_DISPLAY3D:
return FACE_PCB;
......@@ -233,6 +239,12 @@ KIWAY::FACE_T KIWAY::KifaceType( FRAME_T aFrameType )
case FRAME_PL_EDITOR:
return FACE_PL_EDITOR;
case FRAME_CALC:
return FACE_PCB_CALCULATOR;
case FRAME_BM2CMP:
return FACE_BMP2CMP;
default:
return FACE_T( -1 );
}
......@@ -266,7 +278,12 @@ KIWAY_PLAYER* KIWAY::Player( FRAME_T aFrameType, bool doCreate )
if( kiface )
{
KIWAY_PLAYER* frame = (KIWAY_PLAYER*) kiface->CreateWindow( m_top, aFrameType, this, KFCTL_PROJECT_SUITE );
KIWAY_PLAYER* frame = (KIWAY_PLAYER*) kiface->CreateWindow(
m_top,
aFrameType,
this,
m_ctl // questionable need, these same flags where passed to the KIFACE::OnKifaceStart()
);
wxASSERT( frame );
return m_player[aFrameType] = frame;
......@@ -327,6 +344,39 @@ void KIWAY::ExpressMail( FRAME_T aDestination,
}
void KIWAY::SetLanguage( int aLanguage )
{
Pgm().SetLanguageIdentifier( aLanguage );
Pgm().SetLanguage();
#if 1
// This is a risky hack that goes away if we allow the language to be
// set only from the top most frame if !Kiface.IsSingle()
// Only for the C++ project manager, and not for the python one and not for
// single_top do we look for the EDA_BASE_FRAME as the top level window.
// For single_top this is not needed because that window is registered in
// the array below.
if( m_ctl & KFCTL_CPP_PROJECT_SUITE )
{
EDA_BASE_FRAME* top = (EDA_BASE_FRAME*) m_top;
if( top )
top->ShowChangedLanguage();
}
#endif
for( unsigned i=0; i < DIM( m_player ); ++i )
{
KIWAY_PLAYER* frame = m_player[i];
if( frame )
{
frame->ShowChangedLanguage();
}
}
}
bool KIWAY::ProcessEvent( wxEvent& aEvent )
{
KIWAY_EXPRESS* mail = dynamic_cast<KIWAY_EXPRESS*>( &aEvent );
......@@ -351,3 +401,14 @@ bool KIWAY::ProcessEvent( wxEvent& aEvent )
return false;
}
void KIWAY::OnKiwayEnd()
{
for( unsigned i=0; i < DIM( m_kiface ); ++i )
{
if( m_kiface[i] )
m_kiface[i]->OnKifaceEnd();
}
}
common/kiway_player.cpp
View file @ 25d1ab40
......@@ -2,28 +2,26 @@
#include <kiway_player.h>
#include <kiway_express.h>
#include <kiway.h>
#include <id.h>
#include <typeinfo>
BEGIN_EVENT_TABLE( KIWAY_PLAYER, EDA_BASE_FRAME )
/* have not been able to get this to work yet:
EVT_KIWAY_EXPRESS( KIWAY_PLAYER::kiway_express )
Use Connect() in constructor until this can be sorted out.
OK the problem is KIWAY_PLAYER::wxEVENT_ID not being unique accross all link images.
*/
EVT_MENU_RANGE( ID_LANGUAGE_CHOICE, ID_LANGUAGE_CHOICE_END, KIWAY_PLAYER::language_change )
END_EVENT_TABLE()
KIWAY_PLAYER::KIWAY_PLAYER( KIWAY* aKiway, wxWindow* aParent, FRAME_T aFrameType,
const wxString& aTitle, const wxPoint& aPos, const wxSize& aSize,
long aStyle, const wxString& aWdoName ) :
EDA_BASE_FRAME( aParent, aFrameType, aTitle, aPos, aSize, aStyle, aWdoName ),
KIWAY_HOLDER( aKiway )
KIWAY_HOLDER( aKiway ),
m_modal_dismissed( 0 )
{
DBG( printf("KIWAY_EXPRESS::wxEVENT_ID:%d\n", KIWAY_EXPRESS::wxEVENT_ID );)
Connect( KIWAY_EXPRESS::wxEVENT_ID, wxKiwayExressHandler( KIWAY_PLAYER::kiway_express ) );
//Connect( KIWAY_EXPRESS::wxEVENT_ID, wxKiwayExressHandler( KIWAY_PLAYER::kiway_express ) );
}
......@@ -31,10 +29,125 @@ KIWAY_PLAYER::KIWAY_PLAYER( wxWindow* aParent, wxWindowID aId, const wxString& a
const wxPoint& aPos, const wxSize& aSize, long aStyle,
const wxString& aWdoName ) :
EDA_BASE_FRAME( aParent, (FRAME_T) aId, aTitle, aPos, aSize, aStyle, aWdoName ),
KIWAY_HOLDER( 0 )
KIWAY_HOLDER( 0 ),
m_modal_dismissed( 0 )
{
DBG( printf("KIWAY_EXPRESS::wxEVENT_ID:%d\n", KIWAY_EXPRESS::wxEVENT_ID );)
Connect( KIWAY_EXPRESS::wxEVENT_ID, wxKiwayExressHandler( KIWAY_PLAYER::kiway_express ) );
//Connect( KIWAY_EXPRESS::wxEVENT_ID, wxKiwayExressHandler( KIWAY_PLAYER::kiway_express ) );
}
KIWAY_PLAYER::~KIWAY_PLAYER(){}
void KIWAY_PLAYER::KiwayMailIn( KIWAY_EXPRESS& aEvent )
{
// override this in derived classes.
}
static void makeModal( wxFrame* aFrame, bool IsModal )
{
// disable or enable all other top level windows
#if wxCHECK_VERSION(2, 9, 4)
wxWindowList::compatibility_iterator node = wxTopLevelWindows.GetFirst();
while( node )
{
wxWindow* win = node->GetData();
if( win != aFrame )
win->Enable( !IsModal );
node = node->GetNext();
}
#else
// Deprecated since wxWidgets 2.9.4
aFrame->MakeModal( IsModal );
#endif
}
/**
* toggle global wxFrame enable/disable state, does the re-enable part even
* if an exception is thrown.
*/
struct ENABLE_DISABLE
{
wxFrame* m_frame;
ENABLE_DISABLE( wxFrame* aFrame ) :
m_frame( aFrame )
{
makeModal( aFrame, true );
}
~ENABLE_DISABLE()
{
// Re-enable all frames, (oops, even if they were previously inactive).
// This is probably why this function was deprecated in wx.
makeModal( m_frame, false );
}
};
bool KIWAY_PLAYER::ShowModal( wxString* aResult )
{
/*
This function has a nice interface but an unsightly implementation.
Now it is encapsulated, making it easier to improve. I am not sure
a wxSemaphore was needed, especially since no blocking happens. It seems
like a volatile bool is sufficient.
It works in tandem with DismissModal(). But only ShowModal() is in the
vtable and therefore cross-module capable.
*/
volatile bool dismissed = false;
// disable all frames except the modal one, re-enable on exit, exception safe.
ENABLE_DISABLE toggle( this );
m_modal_dismissed = &dismissed;
Show( true );
Raise();
// Wait for the one and only active frame to call DismissModal() from
// some concluding event.
while( !dismissed )
{
wxYield();
wxMilliSleep( 50 );
}
// no longer modal, not to mention that the pointer would be invalid outside this scope.
m_modal_dismissed = NULL;
if( aResult )
*aResult = m_modal_string;
return m_modal_ret_val;
}
bool KIWAY_PLAYER::IsDismissed()
{
// if already dismissed, then m_modal_dismissed may be NULL, and if not,
// it can still be dismissed if the bool is true.
bool ret = !m_modal_dismissed || *m_modal_dismissed;
return ret;
}
void KIWAY_PLAYER::DismissModal( bool aRetVal, const wxString& aResult )
{
m_modal_ret_val = aRetVal;
m_modal_string = aResult;
if( m_modal_dismissed )
*m_modal_dismissed = true;
}
......@@ -42,17 +155,20 @@ void KIWAY_PLAYER::kiway_express( KIWAY_EXPRESS& aEvent )
{
// logging support
#if defined(DEBUG)
const char* class_name = typeid(this).name();
const char* class_name = typeid( this ).name();
printf( "%s: cmd:%d pay:'%s'\n", class_name,
aEvent.GetEventType(), aEvent.GetPayload().c_str() );
printf( "%s: received cmd:%d pay:'%s'\n", class_name,
aEvent.Command(), aEvent.GetPayload().c_str() );
#endif
KiwayMailIn( aEvent ); // call the virtual, overload in derived.
KiwayMailIn( aEvent ); // call the virtual, override in derived.
}
void KIWAY_PLAYER::KiwayMailIn( KIWAY_EXPRESS& aEvent )
void KIWAY_PLAYER::language_change( wxCommandEvent& event )
{
// overload this.
int id = event.GetId();
// tell all the KIWAY_PLAYERs about the language change.
Kiway().SetLanguage( id );
}
common/pgm_base.cpp
View file @ 25d1ab40
......@@ -622,7 +622,7 @@ bool PGM_BASE::SetLanguage( bool first_time )
void PGM_BASE::SetLanguageIdentifier( int menu_id )
{
wxLogDebug( wxT( "Select language ID %d from %zd possible languages." ),
wxLogDebug( wxT( "Select language ID %d from %d possible languages." ),
menu_id, DIM( s_Languages ) );
for( unsigned ii = 0; ii < DIM( s_Languages ); ii++ )
......
common/single_top.cpp
View file @ 25d1ab40
......@@ -121,7 +121,7 @@ static const wxString dso_full_path( const wxString& aAbsoluteArgv0 )
// Only a single KIWAY is supported in this single_top top level component,
// which is dedicated to loading only a single DSO.
KIWAY Kiway( &Pgm() );
KIWAY Kiway( &Pgm(), KFCTL_STANDALONE );
// implement a PGM_BASE and a wxApp side by side:
......@@ -225,82 +225,6 @@ struct APP_SINGLE_TOP : public wxApp
IMPLEMENT_APP( APP_SINGLE_TOP );
/**
* Function get_kiface_getter
* returns a KIFACE_GETTER_FUNC for the current process's main implementation
* link image.
*
* @param aDSOName is an absolute full path to the DSO to load and find
* KIFACE_GETTER_FUNC within.
*
* @return KIFACE_GETTER_FUNC* - a pointer to a function which can be called to
* get the KIFACE or NULL if the getter func was not found. If not found,
* it is possibly not version compatible since the lookup is done by name and
* the name contains the API version.
*/
static KIFACE_GETTER_FUNC* get_kiface_getter( const wxString& aDSOName )
{
#if defined(BUILD_KIWAY_DLL)
// Remember single_top only knows about a single DSO. Using an automatic
// with a defeated destructor, see Detach() below, so that the DSO program
// image stays in RAM until process termination, and specifically
// beyond the point in time at which static destructors are run. Otherwise
// a static wxDynamicLibrary's destructor might create an out of sequence
// problem. This was never detected, so it's only a preventative strategy.
wxDynamicLibrary dso;
void* addr = NULL;
if( !dso.Load( aDSOName, wxDL_VERBATIM | wxDL_NOW ) )
{
// Failure: error reporting UI was done via wxLogSysError().
// No further reporting required here.
}
else if( ( addr = dso.GetSymbol( wxT( KIFACE_INSTANCE_NAME_AND_VERSION ) ) ) == NULL )
{
// Failure: error reporting UI was done via wxLogSysError().
// No further reporting required here.
}
else
{
// Tell dso's wxDynamicLibrary destructor not to Unload() the program image.
(void) dso.Detach();
return (KIFACE_GETTER_FUNC*) addr;
}
// There is a file installation bug. We only look for KIFACE_I's which we know
// to exist, and we did not find one. If we do not find one, this is an
// installation bug.
wxString msg = wxString::Format( wxT(
"Fatal Installation Bug\nmissing file:\n'%s'\n\nargv[0]:\n'%s'" ),
GetChars( aDSOName ),
GetChars( wxStandardPaths::Get().GetExecutablePath() )
);
// This is a fatal error, one from which we cannot recover, nor do we want
// to protect against in client code which would require numerous noisy
// tests in numerous places. So we inform the user that the installation
// is bad. This exception will likely not get caught until way up in the
// wxApp derivative, at which point the process will exit gracefully.
THROW_IO_ERROR( msg );
#else
return &KIFACE_GETTER;
#endif
}
static KIFACE* kiface;
static int kiface_version;
bool PGM_SINGLE_TOP::OnPgmInit( wxApp* aWxApp )
{
// first thing: set m_wx_app
......@@ -321,43 +245,26 @@ bool PGM_SINGLE_TOP::OnPgmInit( wxApp* aWxApp )
if( !initPgm() )
return false;
wxString dname = dso_full_path( absoluteArgv0 );
// Get the getter.
KIFACE_GETTER_FUNC* getter = get_kiface_getter( dname );
#if !defined(BUILD_KIWAY_DLL)
// Get the getter, it is statically linked into this binary image.
KIFACE_GETTER_FUNC* getter = &KIFACE_GETTER;
if( !getter )
{
// get_kiface_getter() failed & already showed the UI message.
// Return failure without any further UI.
return false;
}
int kiface_version;
// Get the KIFACE.
kiface = getter( &kiface_version, KIFACE_VERSION, this );
KIFACE* kiface = getter( &kiface_version, KIFACE_VERSION, this );
// KIFACE_GETTER_FUNC function comment (API) says the non-NULL is unconditional.
wxASSERT_MSG( kiface, wxT( "attempted DSO has a bug, failed to return a KIFACE*" ) );
// Trick the KIWAY into thinking it loaded a KIFACE, by recording the KIFACE
// in the KIWAY. It needs to be there for KIWAY::OnKiwayEnd() anyways.
Kiway.set_kiface( KIWAY::KifaceType( TOP_FRAME ), kiface );
#endif
// Give the DSO a single chance to do its "process level" initialization.
// "Process level" specifically means stay away from any projects in there.
if( !kiface->OnKifaceStart( this, KFCTL_STANDALONE ) )
return false;
// Use KIWAY to create a top window, which registers its existence also.
// "TOP_FRAME" is a macro that is passed on compiler command line from CMake,
// and is one of the types in FRAME_T.
KIWAY_PLAYER* frame = Kiway.Player( TOP_FRAME, true );
// Use KIFACE to create a top window that the KIFACE knows about.
// TOP_FRAME is passed on compiler command line from CMake, and is one of
// the types in FRAME_T.
// KIFACE::CreateWindow() is a virtual so we don't need to link to it.
// Remember its in the *.kiface DSO.
#if 0
// this pulls in EDA_DRAW_FRAME type info, which we don't want in
// the single_top link image.
KIWAY_PLAYER* frame = dynamic_cast<KIWAY_PLAYER*>( kiface->CreateWindow(
NULL, TOP_FRAME, &Kiway, KFCTL_STANDALONE ) );
#else
KIWAY_PLAYER* frame = (KIWAY_PLAYER*) kiface->CreateWindow(
NULL, TOP_FRAME, &Kiway, KFCTL_STANDALONE );
#endif
Kiway.SetTop( frame );
App().SetTopWindow( frame ); // wxApp gets a face.
......@@ -454,8 +361,7 @@ bool PGM_SINGLE_TOP::OnPgmInit( wxApp* aWxApp )
void PGM_SINGLE_TOP::OnPgmExit()
{
if( kiface )
kiface->OnKifaceEnd();
Kiway.OnKiwayEnd();
saveCommonSettings();
......
cvpcb/cvframe.cpp
View file @ 25d1ab40
......@@ -76,8 +76,6 @@ BEGIN_EVENT_TABLE( CVPCB_MAINFRAME, EDA_BASE_FRAME )
EVT_MENU( ID_CVPCB_LIB_TABLE_EDIT, CVPCB_MAINFRAME::OnEditFootprintLibraryTable )
EVT_MENU_RANGE( ID_LANGUAGE_CHOICE, ID_LANGUAGE_CHOICE_END, CVPCB_MAINFRAME::SetLanguage )
// Toolbar events
EVT_TOOL( ID_CVPCB_QUIT, CVPCB_MAINFRAME::OnQuit )
EVT_TOOL( ID_CVPCB_READ_INPUT_NETLIST, CVPCB_MAINFRAME::LoadNetList )
......@@ -558,12 +556,6 @@ void CVPCB_MAINFRAME::DisplayModule( wxCommandEvent& event )
}
void CVPCB_MAINFRAME::SetLanguage( wxCommandEvent& event )
{
EDA_BASE_FRAME::SetLanguage( event );
}
void CVPCB_MAINFRAME::DisplayDocFile( wxCommandEvent& event )
{
GetAssociatedDocument( this, m_DocModulesFileName, &Kiface().KifaceSearch() );
......
cvpcb/cvpcb_mainframe.h
View file @ 25d1ab40
......@@ -123,12 +123,6 @@ public:
void ChangeFocus( bool aMoveRight );
/**
* Function SetLanguage
* is called on a language menu selection.
*/
void SetLanguage( wxCommandEvent& event );
void ToFirstNA( wxCommandEvent& event );
void ToPreviousNA( wxCommandEvent& event );
......
eeschema/block_libedit.cpp
View file @ 25d1ab40
......@@ -321,7 +321,7 @@ void DrawMovingBlockOutlines( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint&
wxPoint move_offset;
block = &screen->m_BlockLocate;
LIB_EDIT_FRAME* parent = ( LIB_EDIT_FRAME* ) aPanel->GetParent();
LIB_EDIT_FRAME* parent = (LIB_EDIT_FRAME*) aPanel->GetParent();
wxASSERT( parent != NULL );
LIB_COMPONENT* component = parent->GetComponent();
......
eeschema/eeschema.cpp
View file @ 25d1ab40
......@@ -36,6 +36,7 @@
#include <eda_dde.h>
#include <wxEeschemaStruct.h>
#include <libeditframe.h>
#include <viewlib_frame.h>
#include <eda_text.h>
#include <general.h>
......@@ -104,6 +105,15 @@ static struct IFACE : public KIFACE_I
}
break;
case FRAME_SCH_VIEWER:
case FRAME_SCH_VIEWER_MODAL:
{
LIB_VIEW_FRAME* frame = new LIB_VIEW_FRAME( aKiway, aParent, FRAME_T( aClassId ) );
return frame;
}
break;
default:
return NULL;
}
......
eeschema/eeschema_config.cpp
View file @ 25d1ab40
......@@ -118,7 +118,10 @@ EDA_COLOR_T GetInvisibleItemColor()
void LIB_EDIT_FRAME::InstallConfigFrame( wxCommandEvent& event )
{
InvokeEeschemaConfig( (SCH_EDIT_FRAME *)GetParent(), this );
SCH_EDIT_FRAME* frame = (SCH_EDIT_FRAME*) Kiway().Player( FRAME_SCH, false );
wxASSERT( frame );
InvokeEeschemaConfig( frame, this );
}
......@@ -134,7 +137,9 @@ void LIB_EDIT_FRAME::Process_Config( wxCommandEvent& event )
{
int id = event.GetId();
wxFileName fn;
SCH_EDIT_FRAME* schFrame = ( SCH_EDIT_FRAME* ) GetParent();
SCH_EDIT_FRAME* schFrame = (SCH_EDIT_FRAME*) Kiway().Player( FRAME_SCH, false );
wxASSERT( schFrame );
switch( id )
{
......@@ -143,20 +148,20 @@ void LIB_EDIT_FRAME::Process_Config( wxCommandEvent& event )
break;
case ID_CONFIG_READ:
{
fn = g_RootSheet->GetScreen()->GetFileName();
fn.SetExt( ProjectFileExtension );
{
fn = g_RootSheet->GetScreen()->GetFileName();
fn.SetExt( ProjectFileExtension );
wxFileDialog dlg( this, _( "Read Project File" ), fn.GetPath(),
fn.GetFullName(), ProjectFileWildcard,
wxFD_OPEN | wxFD_FILE_MUST_EXIST );
wxFileDialog dlg( this, _( "Read Project File" ), fn.GetPath(),
fn.GetFullName(), ProjectFileWildcard,
wxFD_OPEN | wxFD_FILE_MUST_EXIST );
if( dlg.ShowModal() == wxID_CANCEL )
break;
if( dlg.ShowModal() == wxID_CANCEL )
break;
schFrame->LoadProjectFile( dlg.GetPath(), true );
}
break;
schFrame->LoadProjectFile( dlg.GetPath(), true );
}
break;
// Hotkey IDs
......
eeschema/getpart.cpp
View file @ 25d1ab40
......@@ -30,6 +30,7 @@
#include <fctsys.h>
#include <pgm_base.h>
#include <kiway.h>
#include <gr_basic.h>
#include <class_drawpanel.h>
#include <confirm.h>
......@@ -55,18 +56,14 @@
wxString SCH_BASE_FRAME::SelectComponentFromLibBrowser( LIB_ALIAS* aPreselectedAlias,
int* aUnit, int* aConvert )
{
wxSemaphore semaphore( 0, 1 );
wxString cmpname;
// Close the current Lib browser, if open, and open a new one, in "modal" mode:
LIB_VIEW_FRAME* viewlibFrame = LIB_VIEW_FRAME::GetActiveLibraryViewer( this );
// Close the any current non-modal Lib browser if open, and open a new one, in "modal" mode:
LIB_VIEW_FRAME* viewlibFrame = (LIB_VIEW_FRAME*) Kiway().Player( FRAME_SCH_VIEWER, false );
if( viewlibFrame )
viewlibFrame->Destroy();
viewlibFrame = new LIB_VIEW_FRAME( &Kiway(), this, NULL, &semaphore,
KICAD_DEFAULT_DRAWFRAME_STYLE | wxFRAME_FLOAT_ON_PARENT );
viewlibFrame = (LIB_VIEW_FRAME*) Kiway().Player( FRAME_SCH_VIEWER_MODAL, true );
if ( aPreselectedAlias )
if( aPreselectedAlias )
{
viewlibFrame->SetSelectedLibrary( aPreselectedAlias->GetLibraryName() );
viewlibFrame->SetSelectedComponent( aPreselectedAlias->GetName() );
......@@ -80,15 +77,9 @@ wxString SCH_BASE_FRAME::SelectComponentFromLibBrowser( LIB_ALIAS* aPreselectedA
viewlibFrame->Refresh();
// Show the library viewer frame until it is closed
// Wait for viewer closing event:
while( semaphore.TryWait() == wxSEMA_BUSY )
{
wxYield();
wxMilliSleep( 50 );
}
wxString cmpname;
cmpname = viewlibFrame->GetSelectedComponent();
viewlibFrame->ShowModal( &cmpname );
if( aUnit )
*aUnit = viewlibFrame->GetUnit();
......@@ -101,6 +92,7 @@ wxString SCH_BASE_FRAME::SelectComponentFromLibBrowser( LIB_ALIAS* aPreselectedA
return cmpname;
}
wxString SCH_BASE_FRAME::SelectComponentFromLibrary( const wxString& aLibname,
wxArrayString& aHistoryList,
int& aHistoryLastUnit,
......
eeschema/libeditframe.cpp
View file @ 25d1ab40
......@@ -99,7 +99,7 @@ BEGIN_EVENT_TABLE( LIB_EDIT_FRAME, EDA_DRAW_FRAME )
EVT_SIZE( LIB_EDIT_FRAME::OnSize )
EVT_ACTIVATE( LIB_EDIT_FRAME::OnActivate )
/* Main horizontal toolbar. */
// Main horizontal toolbar.
EVT_TOOL( ID_LIBEDIT_SAVE_CURRENT_LIB, LIB_EDIT_FRAME::OnSaveActiveLibrary )
EVT_TOOL( ID_LIBEDIT_SELECT_CURRENT_LIB, LIB_EDIT_FRAME::Process_Special_Functions )
EVT_TOOL( ID_LIBEDIT_DELETE_PART, LIB_EDIT_FRAME::DeleteOnePart )
......@@ -125,12 +125,12 @@ BEGIN_EVENT_TABLE( LIB_EDIT_FRAME, EDA_DRAW_FRAME )
EVT_COMBOBOX( ID_LIBEDIT_SELECT_PART_NUMBER, LIB_EDIT_FRAME::OnSelectPart )
EVT_COMBOBOX( ID_LIBEDIT_SELECT_ALIAS, LIB_EDIT_FRAME::OnSelectAlias )
/* Right vertical toolbar. */
// Right vertical toolbar.
EVT_TOOL( ID_NO_TOOL_SELECTED, LIB_EDIT_FRAME::OnSelectTool )
EVT_TOOL_RANGE( ID_LIBEDIT_PIN_BUTT, ID_LIBEDIT_DELETE_ITEM_BUTT,
LIB_EDIT_FRAME::OnSelectTool )
/* menubar commands */
// menubar commands
EVT_MENU( wxID_EXIT, LIB_EDIT_FRAME::CloseWindow )
EVT_MENU( ID_LIBEDIT_SAVE_CURRENT_LIB_AS, LIB_EDIT_FRAME::OnSaveActiveLibrary )
EVT_MENU( ID_LIBEDIT_GEN_PNG_FILE, LIB_EDIT_FRAME::OnPlotCurrentComponent )
......@@ -152,9 +152,7 @@ BEGIN_EVENT_TABLE( LIB_EDIT_FRAME, EDA_DRAW_FRAME )
EVT_MENU_RANGE( ID_PREFERENCES_HOTKEY_START, ID_PREFERENCES_HOTKEY_END,
LIB_EDIT_FRAME::Process_Config )
EVT_MENU_RANGE( ID_LANGUAGE_CHOICE, ID_LANGUAGE_CHOICE_END, LIB_EDIT_FRAME::SetLanguage )
/* Context menu events and commands. */
// Context menu events and commands.
EVT_MENU( ID_LIBEDIT_EDIT_PIN, LIB_EDIT_FRAME::OnEditPin )
EVT_MENU( ID_LIBEDIT_ROTATE_ITEM, LIB_EDIT_FRAME::OnRotateItem )
......@@ -165,7 +163,7 @@ BEGIN_EVENT_TABLE( LIB_EDIT_FRAME, EDA_DRAW_FRAME )
EVT_MENU_RANGE( ID_POPUP_GENERAL_START_RANGE, ID_POPUP_GENERAL_END_RANGE,
LIB_EDIT_FRAME::Process_Special_Functions )
/* Update user interface elements. */
// Update user interface elements.
EVT_UPDATE_UI( ExportPartId, LIB_EDIT_FRAME::OnUpdateEditingPart )
EVT_UPDATE_UI( CreateNewLibAndSavePartId, LIB_EDIT_FRAME::OnUpdateEditingPart )
EVT_UPDATE_UI( ID_LIBEDIT_SAVE_CURRENT_PART, LIB_EDIT_FRAME::OnUpdateEditingPart )
......@@ -193,7 +191,7 @@ LIB_EDIT_FRAME::LIB_EDIT_FRAME( KIWAY* aKiway, SCH_EDIT_FRAME* aParent ) :
SCH_BASE_FRAME( aKiway, aParent, FRAME_SCH_LIB_EDITOR, _( "Library Editor" ),
wxDefaultPosition, wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, GetLibEditFrameName() )
{
wxASSERT( aParent ); // LIB_EDIT_FRAME needs a parent, since it peeks up there.
wxASSERT( aParent );
m_FrameName = GetLibEditFrameName();
m_showAxis = true; // true to draw axis
......@@ -204,6 +202,7 @@ LIB_EDIT_FRAME::LIB_EDIT_FRAME( KIWAY* aKiway, SCH_EDIT_FRAME* aParent ) :
m_tempCopyComponent = NULL;
m_HotkeysZoomAndGridList = s_Libedit_Hokeys_Descr;
m_editPinsPerPartOrConvert = false;
// Initialize grid id to the default value 50 mils:
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000;
......@@ -293,12 +292,6 @@ const wxChar* LIB_EDIT_FRAME::GetLibEditFrameName()
}
LIB_EDIT_FRAME* LIB_EDIT_FRAME::GetActiveLibraryEditor()
{
return (LIB_EDIT_FRAME*) wxWindow::FindWindowByName(GetLibEditFrameName());
}
void LIB_EDIT_FRAME::LoadSettings( wxConfigBase* aCfg )
{
#if 0 // original
......@@ -389,12 +382,12 @@ void LIB_EDIT_FRAME::OnCloseWindow( wxCloseEvent& Event )
double LIB_EDIT_FRAME::BestZoom()
{
/* Please, note: wxMSW before version 2.9 seems have
* problems with zoom values < 1 ( i.e. userscale > 1) and needs to be patched:
* edit file <wxWidgets>/src/msw/dc.cpp
* search for line static const int VIEWPORT_EXTENT = 1000;
* and replace by static const int VIEWPORT_EXTENT = 10000;
*/
/* Please, note: wxMSW before version 2.9 seems have
* problems with zoom values < 1 ( i.e. userscale > 1) and needs to be patched:
* edit file <wxWidgets>/src/msw/dc.cpp
* search for line static const int VIEWPORT_EXTENT = 1000;
* and replace by static const int VIEWPORT_EXTENT = 10000;
*/
int dx, dy;
wxSize size;
EDA_RECT BoundaryBox;
......@@ -750,23 +743,23 @@ void LIB_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
break;
case ID_POPUP_LIBEDIT_DELETE_CURRENT_POLY_SEGMENT:
{
// Delete the last created segment, while creating a polyline draw item
if( m_drawItem == NULL )
break;
{
// Delete the last created segment, while creating a polyline draw item
if( m_drawItem == NULL )
break;
m_canvas->MoveCursorToCrossHair();
STATUS_FLAGS oldFlags = m_drawItem->GetFlags();
m_drawItem->ClearFlags();
m_drawItem->Draw( m_canvas, &dc, wxPoint( 0, 0 ), UNSPECIFIED_COLOR, g_XorMode, NULL,
DefaultTransform );
( (LIB_POLYLINE*) m_drawItem )->DeleteSegment( GetCrossHairPosition( true ) );
m_drawItem->Draw( m_canvas, &dc, wxPoint( 0, 0 ), UNSPECIFIED_COLOR, g_XorMode, NULL,
DefaultTransform );
m_drawItem->SetFlags( oldFlags );
m_lastDrawItem = NULL;
m_canvas->MoveCursorToCrossHair();
STATUS_FLAGS oldFlags = m_drawItem->GetFlags();
m_drawItem->ClearFlags();
m_drawItem->Draw( m_canvas, &dc, wxPoint( 0, 0 ), UNSPECIFIED_COLOR, g_XorMode, NULL,
DefaultTransform );
( (LIB_POLYLINE*) m_drawItem )->DeleteSegment( GetCrossHairPosition( true ) );
m_drawItem->Draw( m_canvas, &dc, wxPoint( 0, 0 ), UNSPECIFIED_COLOR, g_XorMode, NULL,
DefaultTransform );
m_drawItem->SetFlags( oldFlags );
m_lastDrawItem = NULL;
}
break;
}
case ID_POPUP_LIBEDIT_DELETE_ITEM:
if( m_drawItem )
......@@ -918,17 +911,6 @@ void LIB_EDIT_FRAME::EnsureActiveLibExists()
}
void LIB_EDIT_FRAME::SetLanguage( wxCommandEvent& event )
{
EDA_BASE_FRAME::SetLanguage( event );
SCH_EDIT_FRAME *parent = (SCH_EDIT_FRAME *)GetParent();
// Call parent->EDA_BASE_FRAME::SetLanguage and NOT
// parent->SetLanguage because parent->SetLanguage call
// LIB_EDIT_FRAME::SetLanguage
parent->EDA_BASE_FRAME::SetLanguage( event );
}
void LIB_EDIT_FRAME::TempCopyComponent()
{
if( m_tempCopyComponent )
......
eeschema/libeditframe.h
View file @ 25d1ab40
......@@ -133,13 +133,6 @@ public:
*/
static const wxChar* GetLibEditFrameName();
/**
* Function GetActiveLibraryEditor (static)
* @return a reference to the current opened Library editor
* or NULL if no Library editor currently opened
*/
static LIB_EDIT_FRAME* GetActiveLibraryEditor();
void ReCreateMenuBar();
/**
......@@ -149,12 +142,6 @@ public:
*/
static void EnsureActiveLibExists();
/**
* Function SetLanguage
* is called on a language menu selection
*/
void SetLanguage( wxCommandEvent& event );
void InstallConfigFrame( wxCommandEvent& event );
void InstallDimensionsDialog( wxCommandEvent& event );
void OnColorConfig( wxCommandEvent& aEvent );
......
eeschema/sch_base_frame.cpp
View file @ 25d1ab40
......@@ -26,6 +26,7 @@
#include <viewlib_frame.h>
#include <libeditframe.h>
#include <base_units.h>
#include <kiway.h>
SCH_BASE_FRAME::SCH_BASE_FRAME( KIWAY* aKiway, wxWindow* aParent,
......@@ -40,12 +41,10 @@ SCH_BASE_FRAME::SCH_BASE_FRAME( KIWAY* aKiway, wxWindow* aParent,
void SCH_BASE_FRAME::OnOpenLibraryViewer( wxCommandEvent& event )
{
LIB_VIEW_FRAME* viewlibFrame = LIB_VIEW_FRAME::GetActiveLibraryViewer( this );
LIB_VIEW_FRAME* viewlibFrame = (LIB_VIEW_FRAME*) Kiway().Player( FRAME_SCH_VIEWER, true );
if( viewlibFrame )
viewlibFrame->Show( true );
else
new LIB_VIEW_FRAME( &Kiway(), this );
viewlibFrame->Show( true );
viewlibFrame->Raise();
}
......
eeschema/schedit.cpp
View file @ 25d1ab40
......@@ -664,7 +664,7 @@ static void abortMoveItem( EDA_DRAW_PANEL* aPanel, wxDC* aDC )
{
SCH_SCREEN* screen = (SCH_SCREEN*) aPanel->GetScreen();
SCH_ITEM* item = screen->GetCurItem();
SCH_EDIT_FRAME* parent = ( SCH_EDIT_FRAME* ) aPanel->GetParent();
SCH_EDIT_FRAME* parent = (SCH_EDIT_FRAME*) aPanel->GetParent();
parent->SetRepeatItem( NULL );
screen->SetCurItem( NULL );
......
eeschema/schframe.cpp
View file @ 25d1ab40
......@@ -96,8 +96,6 @@ BEGIN_EVENT_TABLE( SCH_EDIT_FRAME, EDA_DRAW_FRAME )
EVT_MENU( ID_COLORS_SETUP, SCH_EDIT_FRAME::OnColorConfig )
EVT_TOOL( wxID_PREFERENCES, SCH_EDIT_FRAME::OnSetOptions )
EVT_MENU_RANGE( ID_LANGUAGE_CHOICE, ID_LANGUAGE_CHOICE_END, SCH_EDIT_FRAME::SetLanguage )
EVT_TOOL( ID_TO_LIBRARY, SCH_EDIT_FRAME::OnOpenLibraryEditor )
EVT_TOOL( ID_POPUP_SCH_CALL_LIBEDIT_AND_LOAD_CMP, SCH_EDIT_FRAME::OnOpenLibraryEditor )
EVT_TOOL( ID_TO_LIBVIEW, SCH_EDIT_FRAME::OnOpenLibraryViewer )
......@@ -442,13 +440,20 @@ void SCH_EDIT_FRAME::SaveUndoItemInUndoList( SCH_ITEM* aItem )
void SCH_EDIT_FRAME::OnCloseWindow( wxCloseEvent& aEvent )
{
LIB_EDIT_FRAME * libeditFrame = LIB_EDIT_FRAME::GetActiveLibraryEditor();;
if( libeditFrame && !libeditFrame->Close() ) // Can close component editor?
return;
if( Kiface().IsSingle() )
{
LIB_EDIT_FRAME* libeditFrame = (LIB_EDIT_FRAME*) Kiway().Player( FRAME_SCH_LIB_EDITOR, false );
if( libeditFrame && !libeditFrame->Close() ) // Can close component editor?
return;
LIB_VIEW_FRAME* viewlibFrame = (LIB_VIEW_FRAME*) Kiway().Player( FRAME_SCH_VIEWER, false );
if( viewlibFrame && !viewlibFrame->Close() ) // Can close component viewer?
return;
LIB_VIEW_FRAME* viewlibFrame = LIB_VIEW_FRAME::GetActiveLibraryViewer( this );
if( viewlibFrame && !viewlibFrame->Close() ) // Can close component viewer?
return;
viewlibFrame = (LIB_VIEW_FRAME*) Kiway().Player( FRAME_SCH_VIEWER_MODAL, false );
if( viewlibFrame && !viewlibFrame->Close() ) // Can close modal component viewer?
return;
}
SCH_SHEET_LIST SheetList;
......@@ -829,7 +834,7 @@ void SCH_EDIT_FRAME::OnOpenLibraryEditor( wxCommandEvent& event )
{
SCH_ITEM* item = GetScreen()->GetCurItem();
if( (item == NULL) || (item->GetFlags() != 0) || ( item->Type() != SCH_COMPONENT_T ) )
if( !item || (item->GetFlags() != 0) || ( item->Type() != SCH_COMPONENT_T ) )
{
wxMessageBox( _( "Error: not a component or no component" ) );
return;
......@@ -838,9 +843,21 @@ void SCH_EDIT_FRAME::OnOpenLibraryEditor( wxCommandEvent& event )
component = (SCH_COMPONENT*) item;
}
// @todo: should be changed to use Kiway().Player()?
LIB_EDIT_FRAME* libeditFrame = (LIB_EDIT_FRAME*) Kiway().Player( FRAME_SCH_LIB_EDITOR, false );
if( !libeditFrame )
{
libeditFrame = (LIB_EDIT_FRAME*) Kiway().Player( FRAME_SCH_LIB_EDITOR, true );
libeditFrame->Show( true );
}
else
{
// if( libeditFrame->IsIconized() )
// libeditFrame->Iconize( false );
}
libeditFrame->Raise();
LIB_EDIT_FRAME* libeditFrame = LIB_EDIT_FRAME::GetActiveLibraryEditor();;
#if 0
if( libeditFrame )
{
if( libeditFrame->IsIconized() )
......@@ -855,6 +872,8 @@ void SCH_EDIT_FRAME::OnOpenLibraryEditor( wxCommandEvent& event )
wxWindow* w = kf.CreateWindow( this, FRAME_SCH_LIB_EDITOR, &Kiway(), kf.StartFlags() );
libeditFrame = dynamic_cast<LIB_EDIT_FRAME*>( w );
}
#endif
if( component )
{
......@@ -875,16 +894,6 @@ void SCH_EDIT_FRAME::OnExit( wxCommandEvent& event )
}
void SCH_EDIT_FRAME::SetLanguage( wxCommandEvent& event )
{
EDA_BASE_FRAME::SetLanguage( event );
LIB_EDIT_FRAME * libeditFrame = LIB_EDIT_FRAME::GetActiveLibraryEditor();;
if( libeditFrame )
libeditFrame->EDA_BASE_FRAME::SetLanguage( event );
}
void SCH_EDIT_FRAME::OnPrint( wxCommandEvent& event )
{
wxFileName fn;
......
eeschema/sheet.cpp
View file @ 25d1ab40
......@@ -283,7 +283,7 @@ static void ExitSheet( EDA_DRAW_PANEL* aPanel, wxDC* aDC )
SCH_SCREEN* screen = (SCH_SCREEN*) aPanel->GetScreen();
SCH_ITEM* item = screen->GetCurItem();
SCH_EDIT_FRAME* parent = ( SCH_EDIT_FRAME* ) aPanel->GetParent();
SCH_EDIT_FRAME* parent = (SCH_EDIT_FRAME*) aPanel->GetParent();
if( (item == NULL) || (item->Type() != SCH_SHEET_T) || (parent == NULL) )
return;
......
eeschema/tool_viewlib.cpp
View file @ 25d1ab40
......@@ -116,9 +116,9 @@ void LIB_VIEW_FRAME::ReCreateHToolbar()
_( "View component documents" ) );
m_mainToolBar->EnableTool( ID_LIBVIEW_VIEWDOC, false );
if( m_semaphore )
// if library browser is modal
if( m_Ident == FRAME_SCH_VIEWER_MODAL )
{
// The library browser is called from a "load component" command
m_mainToolBar->AddSeparator();
m_mainToolBar->AddTool( ID_LIBVIEW_CMP_EXPORT_TO_SCHEMATIC,
wxEmptyString, KiBitmap( export_xpm ),
......
eeschema/viewlib_frame.cpp
View file @ 25d1ab40
......@@ -47,28 +47,25 @@
*/
wxString LIB_VIEW_FRAME::m_libraryName;
wxString LIB_VIEW_FRAME::m_entryName;
int LIB_VIEW_FRAME::m_unit = 1;
int LIB_VIEW_FRAME::m_convert = 1;
/// When the viewer is used to select a component in schematic, the selected component is here.
wxString LIB_VIEW_FRAME::m_exportToEeschemaCmpName;
BEGIN_EVENT_TABLE( LIB_VIEW_FRAME, EDA_DRAW_FRAME )
/* Window events */
// Window events
EVT_CLOSE( LIB_VIEW_FRAME::OnCloseWindow )
EVT_SIZE( LIB_VIEW_FRAME::OnSize )
EVT_ACTIVATE( LIB_VIEW_FRAME::OnActivate )
/* Toolbar events */
// Toolbar events
EVT_TOOL_RANGE( ID_LIBVIEW_NEXT, ID_LIBVIEW_DE_MORGAN_CONVERT_BUTT,
LIB_VIEW_FRAME::Process_Special_Functions )
EVT_TOOL( ID_LIBVIEW_CMP_EXPORT_TO_SCHEMATIC, LIB_VIEW_FRAME::ExportToSchematicLibraryPart )
EVT_COMBOBOX( ID_LIBVIEW_SELECT_PART_NUMBER, LIB_VIEW_FRAME::Process_Special_Functions )
/* listbox events */
// listbox events
EVT_LISTBOX( ID_LIBVIEW_LIB_LIST, LIB_VIEW_FRAME::ClickOnLibList )
EVT_LISTBOX( ID_LIBVIEW_CMP_LIST, LIB_VIEW_FRAME::ClickOnCmpList )
EVT_LISTBOX_DCLICK( ID_LIBVIEW_CMP_LIST, LIB_VIEW_FRAME::DClickOnCmpList )
......@@ -95,11 +92,17 @@ static wxAcceleratorEntry accels[] =
#define ACCEL_TABLE_CNT ( sizeof( accels ) / sizeof( wxAcceleratorEntry ) )
#define LIB_VIEW_FRAME_NAME wxT( "ViewlibFrame" )
LIB_VIEW_FRAME::LIB_VIEW_FRAME( KIWAY* aKiway, SCH_BASE_FRAME* aParent,
CMP_LIBRARY* aLibrary, wxSemaphore* aSemaphore, long aStyle ) :
SCH_BASE_FRAME( aKiway, aParent, FRAME_SCH_VIEWER, _( "Library Browser" ),
wxDefaultPosition, wxDefaultSize, aStyle, GetLibViewerFrameName() )
LIB_VIEW_FRAME::LIB_VIEW_FRAME( KIWAY* aKiway, wxWindow* aParent, FRAME_T aFrameType,
CMP_LIBRARY* aLibrary ) :
SCH_BASE_FRAME( aKiway, aParent, aFrameType, _( "Library Browser" ),
wxDefaultPosition, wxDefaultSize,
aFrameType==FRAME_SCH_VIEWER ?
KICAD_DEFAULT_DRAWFRAME_STYLE :
KICAD_DEFAULT_DRAWFRAME_STYLE | wxFRAME_FLOAT_ON_PARENT,
GetLibViewerFrameName() )
{
wxASSERT( aFrameType==FRAME_SCH_VIEWER || aFrameType==FRAME_SCH_VIEWER_MODAL );
wxAcceleratorTable table( ACCEL_TABLE_CNT, accels );
m_FrameName = GetLibViewerFrameName();
......@@ -114,12 +117,6 @@ LIB_VIEW_FRAME::LIB_VIEW_FRAME( KIWAY* aKiway, SCH_BASE_FRAME* aParent,
m_HotkeysZoomAndGridList = s_Viewlib_Hokeys_Descr;
m_cmpList = NULL;
m_libList = NULL;
m_semaphore = aSemaphore;
if( m_semaphore )
SetModalMode( true );
m_exportToEeschemaCmpName.Empty();
SetScreen( new SCH_SCREEN() );
GetScreen()->m_Center = true; // Axis origin centered on screen.
......@@ -139,10 +136,10 @@ LIB_VIEW_FRAME::LIB_VIEW_FRAME( KIWAY* aKiway, SCH_BASE_FRAME* aParent,
wxPoint win_pos( 0, 0 );
if( aLibrary == NULL )
if( !aLibrary )
{
// Creates the libraries window display
m_libList = new wxListBox( this, ID_LIBVIEW_LIB_LIST,
m_libList = new wxListBox( this, ID_LIBVIEW_LIB_LIST,
wxPoint( 0, 0 ), wxSize(m_libListWidth, -1),
0, NULL, wxLB_HSCROLL );
}
......@@ -243,24 +240,18 @@ const wxChar* LIB_VIEW_FRAME::GetLibViewerFrameName()
}
LIB_VIEW_FRAME* LIB_VIEW_FRAME::GetActiveLibraryViewer( const wxWindow* aParent )
{
return (LIB_VIEW_FRAME*) wxWindow::FindWindowByName( GetLibViewerFrameName(), aParent );
}
void LIB_VIEW_FRAME::OnCloseWindow( wxCloseEvent& Event )
{
if( m_semaphore )
if( !IsModal() )
{
m_semaphore->Post();
// This window will be destroyed by the calling function,
// if needed
SetModalMode( false );
Destroy();
}
else
else if( !IsDismissed() )
{
Destroy();
// only dismiss modal frame if not already dismissed.
DismissModal( false );
// Modal frame will be destroyed by the calling function.
}
}
......@@ -283,12 +274,13 @@ void LIB_VIEW_FRAME::OnSetRelativeOffset( wxCommandEvent& event )
double LIB_VIEW_FRAME::BestZoom()
{
/* Please, note: wxMSW before version 2.9 seems have
* problems with zoom values < 1 ( i.e. userscale > 1) and needs to be patched:
* edit file <wxWidgets>/src/msw/dc.cpp
* search for line static const int VIEWPORT_EXTENT = 1000;
* and replace by static const int VIEWPORT_EXTENT = 10000;
*/
/* Please, note: wxMSW before version 2.9 seems have
* problems with zoom values < 1 ( i.e. userscale > 1) and needs to be patched:
* edit file <wxWidgets>/src/msw/dc.cpp
* search for line static const int VIEWPORT_EXTENT = 1000;
* and replace by static const int VIEWPORT_EXTENT = 10000;
*/
LIB_COMPONENT* component = NULL;
double bestzoom = 16.0; // default value for bestzoom
CMP_LIBRARY* lib = CMP_LIBRARY::FindLibrary( m_libraryName );
......@@ -344,8 +336,8 @@ void LIB_VIEW_FRAME::ReCreateListLib()
}
else
{
/* If not found, clear current library selection because it can be
* deleted after a config change. */
// If not found, clear current library selection because it can be
// deleted after a config change.
m_libraryName = wxEmptyString;
m_entryName = wxEmptyString;
m_unit = 1;
......@@ -417,6 +409,7 @@ void LIB_VIEW_FRAME::SetSelectedLibrary( const wxString& aLibraryName )
m_canvas->Refresh();
DisplayLibInfos();
ReCreateHToolbar();
// Ensure the corresponding line in m_libList is selected
// (which is not necessary the case if SetSelectedLibrary is called
// by an other caller than ClickOnLibList.
......@@ -440,9 +433,10 @@ void LIB_VIEW_FRAME::SetSelectedComponent( const wxString& aComponentName )
if( m_entryName.CmpNoCase( aComponentName ) != 0 )
{
m_entryName = aComponentName;
// Ensure the corresponding line in m_cmpList is selected
// (which is not necessary the case if SetSelectedComponent is called
// by an other caller than ClickOnCmpList.
// (which is not necessarily the case if SetSelectedComponent is called
// by another caller than ClickOnCmpList.
m_cmpList->SetStringSelection( aComponentName, true );
DisplayLibInfos();
m_unit = 1;
......@@ -456,14 +450,21 @@ void LIB_VIEW_FRAME::SetSelectedComponent( const wxString& aComponentName )
void LIB_VIEW_FRAME::DClickOnCmpList( wxCommandEvent& event )
{
if( m_semaphore )
if( IsModal() )
{
ExportToSchematicLibraryPart( event );
// Prevent the double click from being as a single click in the parent
// window which would cause the part to be parked rather than staying
// in drag mode.
((SCH_BASE_FRAME*) GetParent())->SkipNextLeftButtonReleaseEvent();
// The schematic editor might not be the parent of the library viewer.
// It could be a python window.
SCH_EDIT_FRAME* schframe = dynamic_cast<SCH_EDIT_FRAME*>( GetParent() );
if( schframe )
{
// Prevent the double click from being as a single click in the parent
// window which would cause the part to be parked rather than staying
// in drag mode.
schframe->SkipNextLeftButtonReleaseEvent();
}
}
}
......@@ -473,9 +474,17 @@ void LIB_VIEW_FRAME::ExportToSchematicLibraryPart( wxCommandEvent& event )
int ii = m_cmpList->GetSelection();
if( ii >= 0 )
m_exportToEeschemaCmpName = m_cmpList->GetString( ii );
{
wxString part_name = m_cmpList->GetString( ii );
// a selection was made, pass true
DismissModal( true, part_name );
}
else
m_exportToEeschemaCmpName.Empty();
{
// no selection was made, pass false
DismissModal( false );
}
Close( true );
}
......@@ -524,10 +533,6 @@ void LIB_VIEW_FRAME::OnActivate( wxActivateEvent& event )
{
EDA_DRAW_FRAME::OnActivate( event );
// Ensure we do not have old selection:
if( m_FrameIsActive )
m_exportToEeschemaCmpName.Empty();
if( m_libList )
ReCreateListLib();
......
eeschema/viewlib_frame.h
View file @ 25d1ab40
......@@ -38,7 +38,6 @@
class wxSashLayoutWindow;
class wxListBox;
class wxSemaphore;
class CMP_LIBRARY;
......@@ -48,9 +47,14 @@ class CMP_LIBRARY;
class LIB_VIEW_FRAME : public SCH_BASE_FRAME
{
public:
LIB_VIEW_FRAME( KIWAY* aKiway, SCH_BASE_FRAME* aParent,
CMP_LIBRARY* aLibrary = NULL, wxSemaphore* aSemaphore = NULL,
long aStyle = KICAD_DEFAULT_DRAWFRAME_STYLE );
/**
* Constructor
* @param aFrameType must be given either FRAME_SCH_LIB_VIEWER or
* FRAME_SCH_LIB_VIEWER_MODAL
*/
LIB_VIEW_FRAME( KIWAY* aKiway, wxWindow* aParent,
FRAME_T aFrameType, CMP_LIBRARY* aLibrary = NULL );
~LIB_VIEW_FRAME();
......@@ -61,13 +65,6 @@ public:
*/
static const wxChar* GetLibViewerFrameName();
/**
* Function GetActiveLibraryViewer (static)
* @return a reference to the current opened Library viewer
* or NULL if no Library viewer currently opened
*/
static LIB_VIEW_FRAME* GetActiveLibraryViewer( const wxWindow* aParent );
void OnSize( wxSizeEvent& event );
/**
......@@ -109,7 +106,6 @@ public:
* @param the alias name of the component to be selected.
*/
void SetSelectedComponent( const wxString& aComponentName );
const wxString& GetSelectedComponent( void ) const { return m_exportToEeschemaCmpName; }
void SetUnit( int aUnit ) { m_unit = aUnit; }
int GetUnit( void ) { return m_unit; }
......@@ -147,8 +143,6 @@ private:
wxListBox* m_cmpList; // The list of components
int m_cmpListWidth; // Last width of the window
// Flags
wxSemaphore* m_semaphore; // != NULL if the frame must emulate a modal dialog
wxString m_configPath; // subpath for configuration
// TODO(hzeller): looks like these members were chosen to be static to survive different
......@@ -156,11 +150,8 @@ private:
// ugly hack, and should be solved differently.
static wxString m_libraryName;
// TODO(hzeller): figure out what the difference between these is and the motivation to
// have this distinction. Shouldn't these essentially be the same ?
static wxString m_entryName;
static wxString m_exportToEeschemaCmpName; // When the viewer is used to select a component
// in schematic, the selected component is here
static int m_unit;
static int m_convert;
......
gerbview/events_called_functions.cpp
View file @ 25d1ab40
......@@ -52,8 +52,6 @@ BEGIN_EVENT_TABLE( GERBVIEW_FRAME, EDA_DRAW_FRAME )
GERBVIEW_FRAME::OnSelectOptionToolbar )
EVT_MENU( wxID_PREFERENCES, GERBVIEW_FRAME::InstallGerberOptionsDialog )
EVT_MENU_RANGE( ID_LANGUAGE_CHOICE, ID_LANGUAGE_CHOICE_END, EDA_DRAW_FRAME::SetLanguage )
// menu Postprocess
EVT_MENU( ID_GERBVIEW_SHOW_LIST_DCODES, GERBVIEW_FRAME::Process_Special_Functions )
EVT_MENU( ID_GERBVIEW_SHOW_SOURCE, GERBVIEW_FRAME::OnShowGerberSourceFile )
......@@ -209,9 +207,6 @@ void GERBVIEW_FRAME::Process_Special_Functions( wxCommandEvent& event )
}
/* Selects the active DCode for the current active layer.
* Items using this DCode are hightlighted
*/
void GERBVIEW_FRAME::OnSelectActiveDCode( wxCommandEvent& event )
{
GERBER_IMAGE* gerber_image = g_GERBER_List[getActiveLayer()];
......@@ -228,10 +223,7 @@ void GERBVIEW_FRAME::OnSelectActiveDCode( wxCommandEvent& event )
}
}
/* Selects the active layer:
* - if a file is loaded, it is loaded in this layer
* _ this layer is displayed on top of other layers
*/
void GERBVIEW_FRAME::OnSelectActiveLayer( wxCommandEvent& event )
{
LAYER_NUM layer = getActiveLayer();
......@@ -246,9 +238,6 @@ void GERBVIEW_FRAME::OnSelectActiveLayer( wxCommandEvent& event )
}
/* Call preferred editor to show (and edit) the gerber source file
* loaded in the active layer
*/
void GERBVIEW_FRAME::OnShowGerberSourceFile( wxCommandEvent& event )
{
LAYER_NUM layer = getActiveLayer();
......@@ -275,9 +264,6 @@ void GERBVIEW_FRAME::OnShowGerberSourceFile( wxCommandEvent& event )
}
/* Function OnSelectDisplayMode: called to select display mode
* (fast display, or exact mode with stacked images or with transparency
*/
void GERBVIEW_FRAME::OnSelectDisplayMode( wxCommandEvent& event )
{
int oldMode = GetDisplayMode();
......@@ -301,20 +287,20 @@ void GERBVIEW_FRAME::OnSelectDisplayMode( wxCommandEvent& event )
m_canvas->Refresh();
}
void GERBVIEW_FRAME::OnQuit( wxCommandEvent& event )
{
Close( true );
}
/**
* Function SetLanguage
* called on a language menu selection
* Update Layer manager title and tabs texts
*/
void GERBVIEW_FRAME::SetLanguage( wxCommandEvent& event )
void GERBVIEW_FRAME::ShowChangedLanguage()
{
EDA_DRAW_FRAME::SetLanguage( event );
// call my base class
EDA_DRAW_FRAME::ShowChangedLanguage();
m_LayersManager->SetLayersManagerTabsText();
wxAuiPaneInfo& pane_info = m_auimgr.GetPane( m_LayersManager );
pane_info.Caption( _( "Visibles" ) );
m_auimgr.Update();
......@@ -322,14 +308,12 @@ void GERBVIEW_FRAME::SetLanguage( wxCommandEvent& event )
ReFillLayerWidget();
}
/**
* Function OnSelectOptionToolbar
* called to validate current choices
*/
void GERBVIEW_FRAME::OnSelectOptionToolbar( wxCommandEvent& event )
{
int id = event.GetId();
bool state;
int id = event.GetId();
bool state;
switch( id )
{
case ID_MENU_GERBVIEW_SHOW_HIDE_LAYERS_MANAGER_DIALOG:
......@@ -374,6 +358,7 @@ void GERBVIEW_FRAME::OnSelectOptionToolbar( wxCommandEvent& event )
break;
case ID_TB_OPTIONS_SHOW_LAYERS_MANAGER_VERTICAL_TOOLBAR:
// show/hide auxiliary Vertical layers and visibility manager toolbar
m_show_layer_manager_tools = state;
m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).Show( m_show_layer_manager_tools );
......
gerbview/gerbview_frame.h
View file @ 25d1ab40
......@@ -462,11 +462,7 @@ public:
void SaveSettings( wxConfigBase* aCfg ); // override virtual
/**
* Function SetLanguage
* called on a language menu selection
*/
virtual void SetLanguage( wxCommandEvent& event );
void ShowChangedLanguage(); // override EDA_BASE_FRAME virtual
void Process_Special_Functions( wxCommandEvent& event );
void OnSelectOptionToolbar( wxCommandEvent& event );
......
include/draw_frame.h
View file @ 25d1ab40
......@@ -281,13 +281,6 @@ public:
void EraseMsgBox();
void Process_PageSettings( wxCommandEvent& event );
/**
* Function SetLanguage
* called on a language menu selection
* when using a derived function, do not forget to call this one
*/
virtual void SetLanguage( wxCommandEvent& event );
virtual void ReCreateHToolbar() = 0;
virtual void ReCreateVToolbar() = 0;
virtual void ReCreateMenuBar();
......
include/fpid.h
View file @ 25d1ab40
......@@ -80,9 +80,7 @@ public:
* @return int - minus 1 (i.e. -1) means success, >= 0 indicates the character offset into
* aId at which an error was detected.
*/
int Parse( const std::string& aId );
int Parse( const wxString& aId );
int Parse( const UTF8& aId );
/**
* Function GetLibNickname
......@@ -100,9 +98,7 @@ public:
* into the parameter at which an error was detected, usually because it
* contained '/' or ':'.
*/
int SetLibNickname( const std::string& aNickname );
int SetLibNickname( const wxString& aNickname );
int SetLibNickname( const UTF8& aNickname );
/**
* Function GetFootprintName
......@@ -114,11 +110,9 @@ public:
* Function SetFootprintName
* overrides the footprint name portion of the FPID to @a aFootprintName
*/
int SetFootprintName( const std::string& aFootprintName );
int SetFootprintName( const wxString& aFootprintName );
int SetFootprintName( const UTF8& aFootprintName );
int SetRevision( const std::string& aRevision );
int SetRevision( const UTF8& aRevision );
const UTF8& GetRevision() const { return revision; }
......@@ -136,10 +130,10 @@ public:
* aLibNickname, aFootprintName, and aRevision.
*
* @throw PARSE_ERROR if any of the pieces are illegal.
*/
static UTF8 Format( const std::string& aLibNickname, const std::string& aFootprintName,
const std::string& aRevision )
static UTF8 Format( const UTF8& aLibNickname, const UTF8& aFootprintName,
const UTF8& aRevision = "" )
throw( PARSE_ERROR );
*/
/**
* Function IsValid
......
include/frame_type.h
View file @ 25d1ab40
......@@ -11,22 +11,35 @@ enum FRAME_T
FRAME_SCH,
FRAME_SCH_LIB_EDITOR,
FRAME_SCH_VIEWER,
FRAME_SCH_VIEWER_MODAL,
FRAME_PCB,
FRAME_PCB_MODULE_EDITOR,
FRAME_PCB_MODULE_VIEWER,
FRAME_PCB_FOOTPRINT_WIZARD,
FRAME_PCB_MODULE_VIEWER_MODAL,
FRAME_PCB_FOOTPRINT_WIZARD_MODAL,
FRAME_PCB_DISPLAY3D,
FRAME_CVPCB,
FRAME_CVPCB_DISPLAY,
FRAME_GERBER,
KIWAY_PLAYER_COUNT, // counts subset of FRAME_T's tracked in class KIWAY
FRAME_PL_EDITOR,
FRAME_BM2CMP,
FRAME_CALC,
KIWAY_PLAYER_COUNT, // counts subset of FRAME_T's which are KIWAY_PLAYER derivatives
// C++ project manager is not a KIWAY_PLAYER
KICAD_MAIN_FRAME_T = KIWAY_PLAYER_COUNT,
FRAME_PL_EDITOR,
//TEXT_EDITOR_FRAME_T,
FRAME_T_COUNT
};
//TEXT_EDITOR_FRAME_T,
#endif // FRAME_T_H_
include/kiface_i.h
View file @ 25d1ab40
......@@ -58,7 +58,7 @@ public:
}
VTBL_ENTRY wxWindow* CreateWindow( wxWindow* aParent,
int aClassId, KIWAY* aKIWAY, int aCtlBits ) = 0;
int aClassId, KIWAY* aKIWAY, int aCtlBits = 0 ) = 0;
VTBL_ENTRY void* IfaceOrAddress( int aDataId ) = 0;
......
include/kiway.h
View file @ 25d1ab40
......@@ -150,7 +150,8 @@ struct KIFACE
// this interface.
#define KFCTL_STANDALONE (1<<0) ///< Am running as a standalone Top.
#define KFCTL_PROJECT_SUITE (1<<1) ///< Am running under a project mgr, possibly with others
#define KFCTL_CPP_PROJECT_SUITE (1<<1) ///< Am running under C++ project mgr, possibly with others
#define KFCTL_PY_PROJECT_SUITE (1<<2) ///< Am running under python project mgr, possibly with others
/**
......@@ -201,7 +202,7 @@ struct KIFACE
* not contained in the caller's link image.
*/
VTBL_ENTRY wxWindow* CreateWindow( wxWindow* aParent, int aClassId,
KIWAY* aKIWAY, int aCtlBits ) = 0;
KIWAY* aKIWAY, int aCtlBits = 0 ) = 0;
/**
* Function IfaceOrAddress
......@@ -249,6 +250,7 @@ struct KIFACE
*/
class KIWAY : public wxEvtHandler
{
friend class PGM_SINGLE_TOP; // can use set_kiface()
public:
/// Known KIFACE implementations
......@@ -257,16 +259,12 @@ public:
FACE_SCH, ///< eeschema DSO
FACE_PCB, ///< pcbnew DSO
FACE_CVPCB,
/// count of those above here, which is the subset managed in a KIWAY.
KIWAY_FACE_COUNT,
FACE_BMP2CMP = KIWAY_FACE_COUNT,
FACE_GERBVIEW,
FACE_PL_EDITOR,
FACE_PCB_CALCULATOR,
FACE_BMP2CMP,
FACE_COUNT
KIWAY_FACE_COUNT
};
/**
......@@ -302,7 +300,7 @@ public:
* @return KIWAY_PLAYER* - a valid opened KIWAY_PLAYER or NULL if there
* is something wrong or doCreate was false and the player has yet to be created.
*/
VTBL_ENTRY KIWAY_PLAYER* Player( FRAME_T aFrameType, bool doCreate = true );
VTBL_ENTRY KIWAY_PLAYER* Player( FRAME_T aFrameType, bool doCreate = true );
/**
* Function PlayerClose
......@@ -312,7 +310,7 @@ public:
*
* @return bool - true the window is closed and not vetoed, else false.
*/
VTBL_ENTRY bool PlayerClose( FRAME_T aFrameType, bool doForce );
VTBL_ENTRY bool PlayerClose( FRAME_T aFrameType, bool doForce );
/**
* Function PlayersClose
......@@ -325,7 +323,14 @@ public:
*/
VTBL_ENTRY bool PlayersClose( bool doForce );
VTBL_ENTRY void ExpressMail( FRAME_T aDestination, MAIL_T aCommand, const std::string& aPayload, wxWindow* aSource=NULL );
/**
* Function ExpressMail
* send aPayload to aDestination from aSource. Recipient receives this in its
* KIWAY_PLAYER::KiwayMailIn() function and can efficiently switch() based on
* aCommand in there.
*/
VTBL_ENTRY void ExpressMail( FRAME_T aDestination, MAIL_T aCommand,
const std::string& aPayload, wxWindow* aSource = NULL );
/**
* Function Prj
......@@ -335,11 +340,26 @@ public:
*/
VTBL_ENTRY PROJECT& Prj() const;
KIWAY( PGM_BASE* aProgram, wxFrame* aTop = NULL );
/**
* Function SetLanguage
* changes the language and then calls ShowChangedLanguage() on all KIWAY_PLAYERs.
*/
VTBL_ENTRY void SetLanguage( int aLanguage );
KIWAY( PGM_BASE* aProgram, int aCtlBits, wxFrame* aTop = NULL );
/// In case aTop may not be known at time of KIWAY construction:
/**
* Function SetTop
* tells this KIWAY about the top most frame in the program and optionally
* allows it to play the role of one of the KIWAY_PLAYERs if launched from
* single_top.cpp.
*
* @param aTop is the top most wxFrame in the entire program.
*/
void SetTop( wxFrame* aTop );
void OnKiwayEnd();
bool ProcessEvent( wxEvent& aEvent ); // overload virtual
private:
......@@ -348,12 +368,23 @@ private:
static const wxString dso_full_path( FACE_T aFaceId );
/// hooked into m_top in SetTop(), marks child frame as closed.
void playerDestroyHandler( wxWindowDestroyEvent& event );
void player_destroy_handler( wxWindowDestroyEvent& event );
bool set_kiface( FACE_T aFaceType, KIFACE* aKiface )
{
if( unsigned( aFaceType ) < unsigned( KIWAY_FACE_COUNT ) )
{
m_kiface[aFaceType] = aKiface;
return true;
}
return false;
}
static KIFACE* m_kiface[KIWAY_FACE_COUNT];
static int m_kiface_version[KIWAY_FACE_COUNT];
PGM_BASE* m_program;
int m_ctl;
wxFrame* m_top;
KIWAY_PLAYER* m_player[KIWAY_PLAYER_COUNT]; // from frame_type.h
......
include/kiway_player.h
View file @ 25d1ab40
......@@ -35,6 +35,8 @@ class PROJECT;
struct KIFACE;
class KIFACE_I;
#define VTBL_ENTRY virtual
/**
* Class KIWAY_HOLDER
......@@ -80,7 +82,7 @@ public:
private:
// private, all setting is done through SetKiway().
KIWAY* m_kiway; // no ownership.
KIWAY* m_kiway; // no ownership.
};
......@@ -110,6 +112,9 @@ public:
const wxPoint& aPos, const wxSize& aSize, long aStyle,
const wxString& aWdoName = wxFrameNameStr );
~KIWAY_PLAYER();
//----<Cross Module API>-----------------------------------------------------
// For the aCtl argument of OpenProjectFiles()
#define KICTL_OPEN_APPEND (1<<0) ///< append the data file, rather than replace
......@@ -149,7 +154,7 @@ public:
*
* @return bool - true if all requested files were opened OK, else false.
*/
virtual bool OpenProjectFiles( const std::vector<wxString>& aFileList, int aCtl = 0 )
VTBL_ENTRY bool OpenProjectFiles( const std::vector<wxString>& aFileList, int aCtl = 0 )
{
// overload me for your wxFrame type.
......@@ -161,6 +166,25 @@ public:
return false;
}
/**
* Function ShowModal
* puts up this wxFrame as if it were a modal dialog, with all other instantiated
* wxFrames disabled until this KIWAY_PLAYER derivative calls DismissModal().
* That is, behavior is similar to a modal dialog window. Not all KIWAY_PLAYERs
* use this interface, so don't call this unless the implementation knows how
* to call DismissModal() on a button click or double click or some special
* event which ends the modal behavior.
*
* @param aResult if not NULL, indicates a place to put a resultant string.
*
* @return bool - true if frame implementation called KIWAY_PLAYER::DismissModal()
* with aRetVal of true.
*/
VTBL_ENTRY bool ShowModal( wxString* aResult );
//----</Cross Module API>----------------------------------------------------
/**
* Function KiwayMailIn
* receives KIWAY_EXPRESS messages from other players. Merely override it
......@@ -168,12 +192,35 @@ public:
*/
virtual void KiwayMailIn( KIWAY_EXPRESS& aEvent );
DECLARE_EVENT_TABLE()
protected:
//private:
bool IsModal() { return m_modal_dismissed; }
/// event handler, routes to virtual KiwayMailIn()
/**
* Function IsDismissed
* returns false only if both the frame is acting in modal mode and it has not been
* dismissed yet with DismissModal(). IOW, it will return true if the dialog is
* not modal or if it is modal and has been dismissed.
*/
bool IsDismissed();
void DismissModal( bool aRetVal, const wxString& aResult = wxEmptyString );
/// event handler, routes to derivative specific virtual KiwayMailIn()
void kiway_express( KIWAY_EXPRESS& aEvent );
/**
* Function language_change
* is an event handler called on a language menu selection.
*/
void language_change( wxCommandEvent& event );
// variables for modal behavior support, only used by a few derivatives.
volatile bool* m_modal_dismissed; // points to "dismissed state", NULL means not modal
wxString m_modal_string;
bool m_modal_ret_val; // true if a selection was made
DECLARE_EVENT_TABLE()
};
......
include/wxEeschemaStruct.h
View file @ 25d1ab40
......@@ -813,12 +813,6 @@ private:
void OnUpdateBusOrientation( wxUpdateUIEvent& event );
void OnUpdateSelectTool( wxUpdateUIEvent& aEvent );
/**
* Function SetLanguage
* called on a language menu selection
*/
void SetLanguage( wxCommandEvent& event );
/**
* Function UpdateTitle
* sets the main window title bar text.
......
include/wxPcbStruct.h
View file @ 25d1ab40
......@@ -1666,11 +1666,7 @@ public:
*/
MODULE* Genere_Self( wxDC* DC );
/**
* Function SetLanguage
* called on a language menu selection
*/
virtual void SetLanguage( wxCommandEvent& event );
void ShowChangedLanguage(); // override EDA_BASE_FRAME virtual
/**
* Function UpdateTitle
......
include/wxstruct.h
View file @ 25d1ab40
......@@ -113,7 +113,7 @@ class EDA_BASE_FRAME : public wxFrame
void windowClosing( wxCloseEvent& event );
protected:
FRAME_T m_Ident; ///< Id Type (pcb, schematic, library..)
FRAME_T m_Ident; ///< Id Type (pcb, schematic, library..)
wxPoint m_FramePos;
wxSize m_FrameSize;
......@@ -302,13 +302,6 @@ public:
*/
void ExportHotkeyConfigToFile( struct EDA_HOTKEY_CONFIG* aDescList );
/**
* Function SetLanguage
* called on a language menu selection
* when using a derived function, do not forget to call this one
*/
virtual void SetLanguage( wxCommandEvent& event );
/**
* Function GetFileFromHistory
* fetches the file name from the file history list.
......@@ -380,17 +373,10 @@ public:
void CheckForAutoSaveFile( const wxFileName& aFileName, const wxString& aBackupFileExtension );
/**
* Function SetModalMode
* Disable or enable all other windows, to emulate a dialog behavior
* Useful when the frame is used to show and selec items
* (see FOOTPRINT_VIEWER_FRAME and LIB_VIEW_FRAME)
*
* @param aModal = true to disable all other opened windows (i.e.
* this windows is in dialog mode
* = false to enable other windows
* This function is analog to MakeModal( aModal ), deprecated since wxWidgets 2.9.4
* Function ShowChangedLanguage
* redraws the menus and what not in current language.
*/
void SetModalMode( bool aModal );
virtual void ShowChangedLanguage();
};
......@@ -415,7 +401,6 @@ public:
* then after a //==// break has additional calls to anchor toolbars in a way that matches
* present functionality.
*/
class EDA_PANEINFO : public wxAuiPaneInfo
{
......
kicad/kicad.cpp
View file @ 25d1ab40
......@@ -197,6 +197,8 @@ bool PGM_KICAD::OnPgmInit( wxApp* aWxApp )
void PGM_KICAD::OnPgmExit()
{
Kiway.OnKiwayEnd();
saveCommonSettings();
// write common settings to disk, and destroy everything in PGM_KICAD,
......@@ -253,7 +255,7 @@ void PGM_KICAD::destroy()
}
KIWAY Kiway( &Pgm() );
KIWAY Kiway( &Pgm(), KFCTL_CPP_PROJECT_SUITE );
/**
......
kicad/kicad.h
View file @ 25d1ab40
......@@ -140,6 +140,8 @@ public:
private:
int m_leftWinWidth;
void language_change( wxCommandEvent& event );
public:
KICAD_MANAGER_FRAME( wxWindow* parent, const wxString& title,
const wxPoint& pos, const wxSize& size );
......@@ -202,7 +204,6 @@ public:
*/
void ClearMsg();
void SetLanguage( wxCommandEvent& event );
void OnRefresh( wxCommandEvent& event );
void OnSelectDefaultPdfBrowser( wxCommandEvent& event );
void OnSelectPreferredPdfBrowser( wxCommandEvent& event );
......
kicad/mainframe.cpp
View file @ 25d1ab40
......@@ -361,6 +361,14 @@ void KICAD_MANAGER_FRAME::OnRefresh( wxCommandEvent& event )
}
void KICAD_MANAGER_FRAME::language_change( wxCommandEvent& event )
{
int id = event.GetId();
Kiway.SetLanguage( id );
}
void KICAD_MANAGER_FRAME::ClearMsg()
{
m_MessagesBox->Clear();
......
kicad/menubar.cpp
View file @ 25d1ab40
......@@ -33,20 +33,20 @@
#include <menus_helpers.h>
#include <tree_project_frame.h>
/* Menubar and toolbar event table */
// Menubar and toolbar event table
BEGIN_EVENT_TABLE( KICAD_MANAGER_FRAME, EDA_BASE_FRAME )
/* Window events */
// Window events
EVT_SIZE( KICAD_MANAGER_FRAME::OnSize )
EVT_CLOSE( KICAD_MANAGER_FRAME::OnCloseWindow )
/* Toolbar events */
// Toolbar events
EVT_TOOL( ID_NEW_PROJECT, KICAD_MANAGER_FRAME::OnLoadProject )
EVT_TOOL( ID_NEW_PROJECT_FROM_TEMPLATE, KICAD_MANAGER_FRAME::OnLoadProject )
EVT_TOOL( ID_LOAD_PROJECT, KICAD_MANAGER_FRAME::OnLoadProject )
EVT_TOOL( ID_SAVE_PROJECT, KICAD_MANAGER_FRAME::OnSaveProject )
EVT_TOOL( ID_SAVE_AND_ZIP_FILES, KICAD_MANAGER_FRAME::OnArchiveFiles )
/* Menu events */
// Menu events
EVT_MENU( ID_SAVE_PROJECT, KICAD_MANAGER_FRAME::OnSaveProject )
EVT_MENU( wxID_EXIT, KICAD_MANAGER_FRAME::OnExit )
EVT_MENU( ID_TO_EDITOR, KICAD_MANAGER_FRAME::OnOpenTextEditor )
......@@ -63,16 +63,17 @@ BEGIN_EVENT_TABLE( KICAD_MANAGER_FRAME, EDA_BASE_FRAME )
EVT_MENU( wxID_INDEX, KICAD_MANAGER_FRAME::GetKicadHelp )
EVT_MENU( wxID_ABOUT, KICAD_MANAGER_FRAME::GetKicadAbout )
/* Range menu events */
EVT_MENU_RANGE( ID_LANGUAGE_CHOICE, ID_LANGUAGE_CHOICE_END, KICAD_MANAGER_FRAME::SetLanguage )
// Range menu events
EVT_MENU_RANGE( ID_LANGUAGE_CHOICE, ID_LANGUAGE_CHOICE_END, KICAD_MANAGER_FRAME::language_change )
EVT_MENU_RANGE( wxID_FILE1, wxID_FILE9, KICAD_MANAGER_FRAME::OnFileHistory )
// Special functions
#ifdef KICAD_USE_FILES_WATCHER
#ifdef KICAD_USE_FILES_WATCHER
EVT_MENU( ID_INIT_WATCHED_PATHS, KICAD_MANAGER_FRAME::OnChangeWatchedPaths )
#endif
#endif
/* Button events */
// Button events
EVT_BUTTON( ID_TO_PCB, KICAD_MANAGER_FRAME::OnRunPcbNew )
EVT_BUTTON( ID_TO_CVPCB, KICAD_MANAGER_FRAME::OnRunCvpcb )
EVT_BUTTON( ID_TO_EESCHEMA, KICAD_MANAGER_FRAME::OnRunEeschema )
......
kicad/preferences.cpp
View file @ 25d1ab40
......@@ -88,8 +88,3 @@ void KICAD_MANAGER_FRAME::OnSelectPreferredPdfBrowser( wxCommandEvent& event )
Pgm().WritePdfBrowserInfos();
}
void KICAD_MANAGER_FRAME::SetLanguage( wxCommandEvent& event )
{
EDA_BASE_FRAME::SetLanguage( event );
}
pagelayout_editor/events_functions.cpp
View file @ 25d1ab40
......@@ -70,12 +70,8 @@ BEGIN_EVENT_TABLE( PL_EDITOR_FRAME, EDA_DRAW_FRAME )
EVT_MENU( wxID_EXIT, PL_EDITOR_FRAME::OnQuit )
// menu Preferences
EVT_MENU_RANGE( ID_PREFERENCES_HOTKEY_START, ID_PREFERENCES_HOTKEY_END,
PL_EDITOR_FRAME::Process_Config )
EVT_MENU_RANGE( ID_LANGUAGE_CHOICE, ID_LANGUAGE_CHOICE_END,
EDA_DRAW_FRAME::SetLanguage )
EVT_MENU( ID_MENU_PL_EDITOR_SELECT_PREFERED_EDITOR,
EDA_BASE_FRAME::OnSelectPreferredEditor )
EVT_MENU_RANGE( ID_PREFERENCES_HOTKEY_START, ID_PREFERENCES_HOTKEY_END, PL_EDITOR_FRAME::Process_Config )
EVT_MENU( ID_MENU_PL_EDITOR_SELECT_PREFERED_EDITOR, EDA_BASE_FRAME::OnSelectPreferredEditor )
EVT_MENU( wxID_PREFERENCES, PL_EDITOR_FRAME::Process_Config )
EVT_MENU( ID_MENU_SWITCH_BGCOLOR, PL_EDITOR_FRAME::Process_Config )
EVT_MENU( ID_MENU_GRID_ONOFF, PL_EDITOR_FRAME::Process_Config )
......@@ -473,15 +469,6 @@ void PL_EDITOR_FRAME::OnQuit( wxCommandEvent& event )
Close( true );
}
/**
* Function SetLanguage
* called on a language menu selection
* Update Layer manager title and tabs texts
*/
void PL_EDITOR_FRAME::SetLanguage( wxCommandEvent& event )
{
EDA_DRAW_FRAME::SetLanguage( event );
}
void PL_EDITOR_FRAME::ToPlotter(wxCommandEvent& event)
{
......
pagelayout_editor/pl_editor_frame.h
View file @ 25d1ab40
......@@ -198,12 +198,6 @@ public:
void SaveSettings( wxConfigBase* aCfg ); // override virtual
/**
* Function SetLanguage
* called on a language menu selection
*/
virtual void SetLanguage( wxCommandEvent& event );
void Process_Special_Functions( wxCommandEvent& event );
void OnSelectOptionToolbar( wxCommandEvent& event );
......
pcb_calculator/CMakeLists.txt
View file @ 25d1ab40
......@@ -75,7 +75,7 @@ if( USE_KIWAY_DLLS )
${PCB_CALCULATOR_RESOURCES}
)
set_source_files_properties( ../common/single_top.cpp PROPERTIES
COMPILE_DEFINITIONS "TOP_FRAME=0;BUILD_KIWAY_DLL"
COMPILE_DEFINITIONS "TOP_FRAME=FRAME_CALC;BUILD_KIWAY_DLL"
)
target_link_libraries( pcb_calculator
#singletop # replaces common, giving us restrictive control and link warnings.
......@@ -93,7 +93,6 @@ if( USE_KIWAY_DLLS )
add_library( pcb_calculator_kiface MODULE
pcb_calculator.cpp
${PCB_CALCULATOR_SRCS}
# ${PCB_CALCULATOR_RESOURCES}
)
set_target_properties( pcb_calculator_kiface PROPERTIES
OUTPUT_NAME pcb_calculator
......
pcb_calculator/pcb_calculator_frame.cpp
View file @ 25d1ab40
......@@ -134,6 +134,7 @@ PCB_CALCULATOR_FRAME::~PCB_CALCULATOR_FRAME()
this->Freeze();
}
void PCB_CALCULATOR_FRAME::OnClosePcbCalc( wxCloseEvent& event )
{
if( m_RegulatorListChanged )
......
pcbnew/block_module_editor.cpp
View file @ 25d1ab40
......@@ -306,7 +306,7 @@ static void DrawMovingBlockOutlines( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wx
bool aErase )
{
BASE_SCREEN* screen = aPanel->GetScreen();
FOOTPRINT_EDIT_FRAME* moduleEditFrame = FOOTPRINT_EDIT_FRAME::GetActiveFootprintEditor( aPanel->GetParent() );
FOOTPRINT_EDIT_FRAME* moduleEditFrame = dynamic_cast<FOOTPRINT_EDIT_FRAME*>( aPanel->GetParent() );
wxASSERT( moduleEditFrame );
MODULE* currentModule = moduleEditFrame->GetBoard()->m_Modules;
......
pcbnew/edit.cpp
View file @ 25d1ab40
......@@ -190,21 +190,21 @@ void PCB_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
case ID_OPEN_MODULE_EDITOR:
{
FOOTPRINT_EDIT_FRAME* editor = FOOTPRINT_EDIT_FRAME::GetActiveFootprintEditor( this );
FOOTPRINT_EDIT_FRAME* editor = (FOOTPRINT_EDIT_FRAME*) Kiway().Player( FRAME_PCB_MODULE_EDITOR, false );
if( !editor )
{
KIFACE_I& kf = Kiface();
editor = (FOOTPRINT_EDIT_FRAME*) kf.CreateWindow( this, FRAME_PCB_MODULE_EDITOR, &Kiway(), kf.StartFlags() );
editor = (FOOTPRINT_EDIT_FRAME*) Kiway().Player( FRAME_PCB_MODULE_EDITOR, true );
editor->Show( true );
editor->Zoom_Automatique( false );
}
else
{
/* not needed on linux, other platforms need this?
if( editor->IsIconized() )
editor->Iconize( false );
*/
editor->Raise();
......@@ -218,21 +218,21 @@ void PCB_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
case ID_OPEN_MODULE_VIEWER:
{
FOOTPRINT_VIEWER_FRAME* viewer = FOOTPRINT_VIEWER_FRAME::GetActiveFootprintViewer( this );
FOOTPRINT_VIEWER_FRAME* viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, false );
if( !viewer )
{
KIFACE_I& kf = Kiface();
viewer = (FOOTPRINT_VIEWER_FRAME*) kf.CreateWindow( this, FRAME_PCB_MODULE_VIEWER, &Kiway(), kf.StartFlags() );
viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, true );
viewer->Show( true );
viewer->Zoom_Automatique( false );
}
else
{
/* not needed on linux, other platforms need this?
if( viewer->IsIconized() )
viewer->Iconize( false );
*/
viewer->Raise();
......@@ -848,20 +848,14 @@ void PCB_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
}
{
FOOTPRINT_EDIT_FRAME* editor = FOOTPRINT_EDIT_FRAME::GetActiveFootprintEditor( this );
if( !editor )
{
KIFACE_I& kf = Kiface();
editor = (FOOTPRINT_EDIT_FRAME*) kf.CreateWindow( this, FRAME_PCB_MODULE_EDITOR, &Kiway(), kf.StartFlags() );
}
FOOTPRINT_EDIT_FRAME* editor = (FOOTPRINT_EDIT_FRAME*) Kiway().Player( FRAME_PCB_MODULE_EDITOR, true );
editor->Load_Module_From_BOARD( (MODULE*)GetCurItem() );
SetCurItem( NULL ); // the current module could be deleted by
editor->Show( true );
editor->Iconize( false );
editor->Raise(); // Iconize( false );
}
m_canvas->MoveCursorToCrossHair();
break;
......
pcbnew/editmod.cpp
View file @ 25d1ab40
......@@ -28,6 +28,7 @@
#include <fctsys.h>
#include <kiface_i.h>
#include <kiway.h>
#include <confirm.h>
#include <class_drawpanel.h>
#include <pcbnew.h>
......@@ -74,20 +75,13 @@ void PCB_EDIT_FRAME::InstallModuleOptionsFrame( MODULE* Module, wxDC* DC )
if( retvalue == 2 )
{
FOOTPRINT_EDIT_FRAME* editor = FOOTPRINT_EDIT_FRAME::GetActiveFootprintEditor( this );
if( !editor )
{
KIFACE_I& kf = Kiface();
editor = (FOOTPRINT_EDIT_FRAME*) kf.CreateWindow( this, FRAME_PCB_MODULE_EDITOR, &Kiway(), kf.StartFlags() );
}
FOOTPRINT_EDIT_FRAME* editor = (FOOTPRINT_EDIT_FRAME*) Kiway().Player( FRAME_PCB_MODULE_EDITOR, true );
editor->Load_Module_From_BOARD( Module );
SetCurItem( NULL );
editor->Show( true );
editor->Iconize( false );
editor->Raise(); // Iconize( false );
}
}
......
pcbnew/footprint_wizard.cpp
View file @ 25d1ab40
......@@ -145,7 +145,7 @@ MODULE* FOOTPRINT_WIZARD_FRAME::GetBuiltFootprint()
{
FOOTPRINT_WIZARD* footprintWizard = FOOTPRINT_WIZARDS::GetWizard( m_wizardName );
if( footprintWizard && m_exportRequest )
if( footprintWizard && m_modal_ret_val )
{
return footprintWizard->GetModule();
}
......
pcbnew/footprint_wizard_frame.cpp
View file @ 25d1ab40
......@@ -113,18 +113,18 @@ static wxAcceleratorEntry accels[] =
#define EXTRA_BORDER_SIZE 2
/* Function FOOTPRINT_WIZARD_FRAME
* it's the constructor for the footprint wizard frame, it creates everything inside
*/
#define FOOTPRINT_WIZARD_FRAME_NAME wxT( "FootprintWizard" )
FOOTPRINT_WIZARD_FRAME::FOOTPRINT_WIZARD_FRAME( KIWAY* aKiway, FOOTPRINT_EDIT_FRAME* aParent,
wxSemaphore* semaphore, long style ) :
PCB_BASE_FRAME( aKiway, aParent, FRAME_PCB_FOOTPRINT_WIZARD,
_( "Footprint Wizard" ),
wxDefaultPosition, wxDefaultSize, style, FOOTPRINT_WIZARD_FRAME_NAME )
FOOTPRINT_WIZARD_FRAME::FOOTPRINT_WIZARD_FRAME( KIWAY* aKiway,
wxWindow* aParent, FRAME_T aFrameType ) :
PCB_BASE_FRAME( aKiway, aParent, aFrameType, _( "Footprint Wizard" ),
wxDefaultPosition, wxDefaultSize,
KICAD_DEFAULT_DRAWFRAME_STYLE | wxFRAME_FLOAT_ON_PARENT,
FOOTPRINT_WIZARD_FRAME_NAME )
{
wxASSERT( aFrameType==FRAME_PCB_FOOTPRINT_WIZARD_MODAL );
wxAcceleratorTable table( ACCEL_TABLE_CNT, accels );
m_FrameName = FOOTPRINT_WIZARD_FRAME_NAME;
......@@ -137,14 +137,10 @@ FOOTPRINT_WIZARD_FRAME::FOOTPRINT_WIZARD_FRAME( KIWAY* aKiway, FOOTPRINT_EDIT_FR
SetIcon( icon );
m_HotkeysZoomAndGridList = g_Module_Viewer_Hokeys_Descr;
m_semaphore = semaphore;
m_wizardName.Empty();
m_exportRequest = false;
if( m_semaphore )
SetModalMode( true );
SetBoard( new BOARD() );
// Ensure all layers and items are visible:
GetBoard()->SetVisibleAlls();
SetScreen( new PCB_SCREEN( GetPageSizeIU() ) );
......@@ -244,17 +240,14 @@ FOOTPRINT_WIZARD_FRAME::~FOOTPRINT_WIZARD_FRAME()
}
/* Function OnCloseWindow
* Handles the close event, saving settings an destroying or releasing a semaphore from caller
*/
void FOOTPRINT_WIZARD_FRAME::OnCloseWindow( wxCloseEvent& Event )
{
if( m_semaphore )
if( IsModal() )
{
m_semaphore->Post();
SetModalMode( false );
// This window will be destroyed by the calling function,
// to avoid side effects
// Only dismiss a modal frame once, so that the return values set by
// the prior DismissModal() are not bashed for ShowModal().
if( !IsDismissed() )
DismissModal( false );
}
else
{
......@@ -265,15 +258,11 @@ void FOOTPRINT_WIZARD_FRAME::OnCloseWindow( wxCloseEvent& Event )
void FOOTPRINT_WIZARD_FRAME::ExportSelectedFootprint( wxCommandEvent& aEvent )
{
m_exportRequest = true;
DismissModal( true );
Close();
}
/* Function OnSize
* It handles a dialog resize event, asking for an update
*
*/
void FOOTPRINT_WIZARD_FRAME::OnSize( wxSizeEvent& SizeEv )
{
if( m_auimgr.GetManagedWindow() )
......@@ -283,10 +272,6 @@ void FOOTPRINT_WIZARD_FRAME::OnSize( wxSizeEvent& SizeEv )
}
/* Function OnSetRelativeOffset
* Updates the cursor position and the status bar
*
*/
void FOOTPRINT_WIZARD_FRAME::OnSetRelativeOffset( wxCommandEvent& event )
{
GetScreen()->m_O_Curseur = GetCrossHairPosition();
......@@ -294,10 +279,6 @@ void FOOTPRINT_WIZARD_FRAME::OnSetRelativeOffset( wxCommandEvent& event )
}
/* Function ReCreatePageList
* It recreates the list of pages for a new loaded wizard
*
*/
void FOOTPRINT_WIZARD_FRAME::ReCreatePageList()
{
if( m_pageList == NULL )
......@@ -326,11 +307,6 @@ void FOOTPRINT_WIZARD_FRAME::ReCreatePageList()
}
/* Function ReCreateParameterList
* It creates the parameter grid for a certain wizard page of the current wizard
*
*/
void FOOTPRINT_WIZARD_FRAME::ReCreateParameterList()
{
if( m_parameterGrid == NULL )
......@@ -620,7 +596,7 @@ void FOOTPRINT_WIZARD_FRAME::ReCreateHToolbar()
{
wxString msg;
if( m_mainToolBar == NULL )
if( !m_mainToolBar )
{
m_mainToolBar = new wxAuiToolBar( this, wxID_ANY, wxDefaultPosition, wxDefaultSize,
wxAUI_TB_DEFAULT_STYLE | wxAUI_TB_HORZ_LAYOUT );
......@@ -665,7 +641,7 @@ void FOOTPRINT_WIZARD_FRAME::ReCreateHToolbar()
m_mainToolBar->AddTool( ID_ZOOM_PAGE, wxEmptyString,
KiBitmap( zoom_fit_in_page_xpm ), msg );
if( m_semaphore )
if( m_Ident == FRAME_PCB_FOOTPRINT_WIZARD_MODAL )
{
// The library browser is called from a "load component" command
m_mainToolBar->AddSeparator();
......
pcbnew/footprint_wizard_frame.h
View file @ 25d1ab40
......@@ -35,41 +35,37 @@
#include <class_footprint_wizard.h>
class wxSashLayoutWindow;
class wxListBox;
class wxSemaphore;
class wxGrid;
class wxGridEvent;
class FOOTPRINT_EDIT_FRAME;
/**
* Component library viewer main window.
* Class FOOTPRINT_WIZARD_FRAME
*/
class FOOTPRINT_WIZARD_FRAME : public PCB_BASE_FRAME
{
private:
wxListBox* m_pageList; // < The list of pages
int m_pageListWidth; // < width of the window
wxGrid* m_parameterGrid; // < The list of parameters
int m_parameterGridWidth; // < size of the grid
wxListBox* m_pageList; ///< The list of pages
int m_pageListWidth; ///< width of the window
wxGrid* m_parameterGrid; ///< The list of parameters
int m_parameterGridWidth; ///< size of the grid
// Flags
wxSemaphore* m_semaphore; // < != NULL if the frame must emulate a modal dialog
wxString m_configPath; // < subpath for configuration
bool m_exportRequest; // < true if the current footprint should be exported
wxString m_configPath; ///< subpath for configuration
protected:
wxString m_wizardName; // < name of the current wizard
wxString m_wizardDescription; // < description of the wizard
wxString m_wizardStatus; // < current wizard status
wxString m_wizardName; ///< name of the current wizard
wxString m_wizardDescription; ///< description of the wizard
wxString m_wizardStatus; ///< current wizard status
public:
FOOTPRINT_WIZARD_FRAME( KIWAY* aKiway,
FOOTPRINT_EDIT_FRAME* parent, wxSemaphore* semaphore = NULL,
long style = KICAD_DEFAULT_DRAWFRAME_STYLE );
FOOTPRINT_WIZARD_FRAME( KIWAY* aKiway, wxWindow* parent, FRAME_T aFrameType );
~FOOTPRINT_WIZARD_FRAME();
MODULE* GetBuiltFootprint( void );
MODULE* GetBuiltFootprint();
private:
......
pcbnew/gpcb_plugin.cpp
View file @ 25d1ab40
......@@ -285,7 +285,7 @@ void GPCB_FPL_CACHE::Load()
MODULE* footprint = parseMODULE( &reader );
// The footprint name is the file name without the extension.
footprint->SetFPID( fn.GetName() );
footprint->SetFPID( FPID( fn.GetName() ) );
m_modules.insert( name, new GPCB_FPL_CACHE_ITEM( footprint, fn.GetName() ) );
} while( dir.GetNext( &fpFileName ) );
......@@ -299,7 +299,6 @@ void GPCB_FPL_CACHE::Load()
void GPCB_FPL_CACHE::Remove( const wxString& aFootprintName )
{
std::string footprintName = TO_UTF8( aFootprintName );
MODULE_CITER it = m_modules.find( footprintName );
......
pcbnew/kicad_plugin.cpp
View file @ 25d1ab40
......@@ -279,7 +279,7 @@ void FP_CACHE::Load()
MODULE* footprint = (MODULE*) m_owner->m_parser->Parse();
// The footprint name is the file name without the extension.
footprint->SetFPID( fullPath.GetName() );
footprint->SetFPID( FPID( fullPath.GetName() ) );
m_modules.insert( name, new FP_CACHE_ITEM( footprint, fullPath ) );
} while( dir.GetNext( &fpFileName ) );
......@@ -657,14 +657,14 @@ void PCB_IO::format( BOARD* aBoard, int aNestLevel ) const
m_out->Print( aNestLevel, ")\n\n" );
// Save net codes and names
// Save net codes and names
for( NETINFO_MAPPING::iterator net = m_mapping->begin(), netEnd = m_mapping->end();
net != netEnd; ++net )
{
m_out->Print( aNestLevel, "(net %d %s)\n",
m_mapping->Translate( net->GetNet() ),
m_out->Quotew( net->GetNetname() ).c_str() );
}
}
m_out->Print( 0, "\n" );
......
pcbnew/librairi.cpp
View file @ 25d1ab40
......@@ -620,7 +620,7 @@ bool PCB_BASE_FRAME::Save_Module_In_Library( const wxString& aLibrary,
if( footprintName.IsEmpty() )
{
footprintName = wxT("noname");
aModule->SetFPID( footprintName );
aModule->SetFPID( FPID( footprintName ) );
}
bool module_exists = false;
......
pcbnew/loadcmp.cpp
View file @ 25d1ab40
......@@ -34,6 +34,8 @@
#include <eda_doc.h>
#include <kicad_string.h>
#include <pgm_base.h>
#include <kiway.h>
//#include <frame_type.h>
#include <wxPcbStruct.h>
#include <dialog_helpers.h>
#include <filter_reader.h>
......@@ -118,32 +120,21 @@ bool FOOTPRINT_EDIT_FRAME::Load_Module_From_BOARD( MODULE* aModule )
wxString PCB_BASE_FRAME::SelectFootprintFromLibBrowser()
{
wxString fpname;
wxString fpid;
wxSemaphore semaphore( 0, 1 );
// Close the current non-modal Lib browser if opened, and open a new one, in "modal" mode:
FOOTPRINT_VIEWER_FRAME* viewer;
// Close the current Lib browser, if opened, and open a new one, in "modal" mode:
FOOTPRINT_VIEWER_FRAME* viewer = FOOTPRINT_VIEWER_FRAME::GetActiveFootprintViewer( this );
viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, false );
if( viewer )
viewer->Destroy();
viewer = new FOOTPRINT_VIEWER_FRAME( &Kiway(), this, &semaphore );
viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER_MODAL, true );
// Show the library viewer frame until it is closed
while( semaphore.TryWait() == wxSEMA_BUSY ) // Wait for viewer closing event
{
wxYield();
wxMilliSleep( 50 );
}
wxString fpid;
fpname = viewer->GetSelectedFootprint();
viewer->ShowModal( &fpid );
if( !!fpname )
{
fpid = viewer->GetSelectedLibrary() + wxT( ":" ) + fpname;
}
//DBG(printf("%s: fpid:'%s'\n", __func__, TO_UTF8( fpid ) );)
viewer->Destroy();
......
pcbnew/modedit.cpp
View file @ 25d1ab40
......@@ -27,6 +27,7 @@
#include <fctsys.h>
#include <kiface_i.h>
#include <kiway.h>
#include <class_drawpanel.h>
#include <confirm.h>
#include <gestfich.h>
......@@ -262,25 +263,19 @@ void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
case ID_OPEN_MODULE_VIEWER:
{
// Make a _project specific_ PCB_EDIT_FRAME be the start of the search in
// FOOTPRINT_VIEWER_FRAME::GetActiveFootprintViewer();
PCB_EDIT_FRAME* top_project = dynamic_cast<PCB_EDIT_FRAME*>( GetParent() );
wxASSERT( top_project ); // dynamic_cast returns NULL if class mismatch.
FOOTPRINT_VIEWER_FRAME* viewer = FOOTPRINT_VIEWER_FRAME::GetActiveFootprintViewer( top_project );
FOOTPRINT_VIEWER_FRAME* viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, false );
if( !viewer )
{
KIFACE_I& kf = Kiface();
viewer = (FOOTPRINT_VIEWER_FRAME*) kf.CreateWindow( this, FRAME_PCB_MODULE_VIEWER, &Kiway(), kf.StartFlags() );
viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, true );
viewer->Show( true );
viewer->Zoom_Automatique( false );
}
else
{
/*
if( viewer->IsIconized() )
viewer->Iconize( false );
*/
viewer->Raise();
......@@ -324,41 +319,37 @@ void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
case ID_MODEDIT_NEW_MODULE_FROM_WIZARD:
{
wxSemaphore semaphore( 0, 1 );
FOOTPRINT_WIZARD_FRAME* wizard = (FOOTPRINT_WIZARD_FRAME*) Kiway().Player(
FRAME_PCB_FOOTPRINT_WIZARD_MODAL, true );
FOOTPRINT_WIZARD_FRAME* wizard = new FOOTPRINT_WIZARD_FRAME( &Kiway(), this, &semaphore,
KICAD_DEFAULT_DRAWFRAME_STYLE | wxFRAME_FLOAT_ON_PARENT );
wizard->Show( true );
wizard->Zoom_Automatique( false );
while( semaphore.TryWait() == wxSEMA_BUSY ) // Wait for viewer closing event
{
wxYield();
wxMilliSleep( 50 );
}
// Creates the new footprint from python script wizard
MODULE* module = wizard->GetBuiltFootprint();
wxString not_used;
if( module ) // i.e. if create module command not aborted
if( wizard->ShowModal( &not_used ) )
{
Clear_Pcb( true );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
SetCrossHairPosition( wxPoint( 0, 0 ) );
// Add the new object to board
module->SetParent( (EDA_ITEM*)GetBoard() );
GetBoard()->m_Modules.Append( module );
// Creates the new footprint from python script wizard
MODULE* module = wizard->GetBuiltFootprint();
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
redraw = true;
module->SetPosition( wxPoint( 0, 0 ) );
module->ClearFlags();
if( module ) // i.e. if create module command not aborted
{
Clear_Pcb( true );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
SetCrossHairPosition( wxPoint( 0, 0 ) );
// Add the new object to board
module->SetParent( (EDA_ITEM*)GetBoard() );
GetBoard()->m_Modules.Append( module );
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
redraw = true;
module->SetPosition( wxPoint( 0, 0 ) );
module->ClearFlags();
}
}
wizard->Destroy();
......@@ -378,7 +369,8 @@ void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
// update module in the current board,
// not just add it to the board with total disregard for the netlist...
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) GetParent();
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) Kiway().Player( FRAME_PCB, true );
BOARD* mainpcb = pcbframe->GetBoard();
MODULE* source_module = NULL;
MODULE* module_in_edit = GetBoard()->m_Modules;
......
pcbnew/module_editor_frame.h
View file @ 25d1ab40
......@@ -53,17 +53,6 @@ public:
*/
static const wxChar* GetFootprintEditorFrameName();
/**
* Function GetActiveFootprintEditor (static)
*
* @param aTopOfProject is a PCB_EDIT_FRAME* window which anchors the search in
* a project specific way.
*
* @return a reference to the current opened Footprint editor
* or NULL if no Footprint editor currently opened
*/
static FOOTPRINT_EDIT_FRAME* GetActiveFootprintEditor( const wxWindow* aTopOfProject );
BOARD_DESIGN_SETTINGS& GetDesignSettings() const; // overload PCB_BASE_FRAME, get parent's
void SetDesignSettings( const BOARD_DESIGN_SETTINGS& aSettings ); // overload
......@@ -415,7 +404,7 @@ public:
protected:
/// protected so only friend PCB::IFACE::CreateWindow() can act as sole factory.
FOOTPRINT_EDIT_FRAME( KIWAY* aKiway, PCB_EDIT_FRAME* aParent );
FOOTPRINT_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent );
static BOARD* s_Pcb; ///< retain board across invocations of module editor
......
pcbnew/moduleframe.cpp
View file @ 25d1ab40
......@@ -151,7 +151,7 @@ END_EVENT_TABLE()
#define FOOTPRINT_EDIT_FRAME_NAME wxT( "ModEditFrame" )
FOOTPRINT_EDIT_FRAME::FOOTPRINT_EDIT_FRAME( KIWAY* aKiway, PCB_EDIT_FRAME* aParent ) :
FOOTPRINT_EDIT_FRAME::FOOTPRINT_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ) :
PCB_BASE_FRAME( aKiway, aParent, FRAME_PCB_MODULE_EDITOR, wxEmptyString,
wxDefaultPosition, wxDefaultSize,
KICAD_DEFAULT_DRAWFRAME_STYLE, GetFootprintEditorFrameName() )
......@@ -291,19 +291,6 @@ const wxChar* FOOTPRINT_EDIT_FRAME::GetFootprintEditorFrameName()
}
/* return a reference to the current opened Footprint editor
* or NULL if no Footprint editor currently opened
*/
FOOTPRINT_EDIT_FRAME* FOOTPRINT_EDIT_FRAME::GetActiveFootprintEditor( const wxWindow* aParent )
{
// top_of_project!
wxASSERT( dynamic_cast<const PCB_EDIT_FRAME*>( aParent ) );
wxWindow* ret = wxWindow::FindWindowByName( GetFootprintEditorFrameName(), aParent );
return (FOOTPRINT_EDIT_FRAME*) ret;
}
BOARD_DESIGN_SETTINGS& FOOTPRINT_EDIT_FRAME::GetDesignSettings() const
{
// get the BOARD_DESIGN_SETTINGS from the parent editor, not our BOARD.
......
pcbnew/modview_frame.cpp
View file @ 25d1ab40
......@@ -29,6 +29,7 @@
#include <fctsys.h>
#include <pgm_base.h>
#include <kiway.h>
#include <gr_basic.h>
#include <class_drawpanel.h>
#include <wxPcbStruct.h>
......@@ -70,12 +71,12 @@ wxString FOOTPRINT_VIEWER_FRAME::m_selectedFootprintName;
BEGIN_EVENT_TABLE( FOOTPRINT_VIEWER_FRAME, EDA_DRAW_FRAME )
/* Window events */
// Window events
EVT_CLOSE( FOOTPRINT_VIEWER_FRAME::OnCloseWindow )
EVT_SIZE( FOOTPRINT_VIEWER_FRAME::OnSize )
EVT_ACTIVATE( FOOTPRINT_VIEWER_FRAME::OnActivate )
/* Toolbar events */
// Toolbar events
EVT_TOOL( ID_MODVIEW_SELECT_LIB,
FOOTPRINT_VIEWER_FRAME::SelectCurrentLibrary )
EVT_TOOL( ID_MODVIEW_SELECT_PART,
......@@ -88,7 +89,7 @@ BEGIN_EVENT_TABLE( FOOTPRINT_VIEWER_FRAME, EDA_DRAW_FRAME )
FOOTPRINT_VIEWER_FRAME::ExportSelectedFootprint )
EVT_TOOL( ID_MODVIEW_SHOW_3D_VIEW, FOOTPRINT_VIEWER_FRAME::Show3D_Frame )
/* listbox events */
// listbox events
EVT_LISTBOX( ID_MODVIEW_LIB_LIST, FOOTPRINT_VIEWER_FRAME::ClickOnLibList )
EVT_LISTBOX( ID_MODVIEW_FOOTPRINT_LIST, FOOTPRINT_VIEWER_FRAME::ClickOnFootprintList )
EVT_LISTBOX_DCLICK( ID_MODVIEW_FOOTPRINT_LIST, FOOTPRINT_VIEWER_FRAME::DClickOnFootprintList )
......@@ -118,14 +119,16 @@ static wxAcceleratorEntry accels[] =
#define FOOTPRINT_VIEWER_FRAME_NAME wxT( "ModViewFrame" )
FOOTPRINT_VIEWER_FRAME::FOOTPRINT_VIEWER_FRAME( KIWAY* aKiway, PCB_BASE_FRAME* aParent, wxSemaphore* aSemaphore ) :
PCB_BASE_FRAME( aKiway, aParent, FRAME_PCB_MODULE_VIEWER, _( "Footprint Library Browser" ),
FOOTPRINT_VIEWER_FRAME::FOOTPRINT_VIEWER_FRAME( KIWAY* aKiway, wxWindow* aParent, FRAME_T aFrameType ) :
PCB_BASE_FRAME( aKiway, aParent, aFrameType, _( "Footprint Library Browser" ),
wxDefaultPosition, wxDefaultSize,
!aSemaphore ?
KICAD_DEFAULT_DRAWFRAME_STYLE :
KICAD_DEFAULT_DRAWFRAME_STYLE | wxFRAME_FLOAT_ON_PARENT,
aFrameType == FRAME_PCB_MODULE_VIEWER_MODAL ?
KICAD_DEFAULT_DRAWFRAME_STYLE | wxFRAME_FLOAT_ON_PARENT :
KICAD_DEFAULT_DRAWFRAME_STYLE,
GetFootprintViewerFrameName() )
{
wxASSERT( aFrameType==FRAME_PCB_MODULE_VIEWER || aFrameType==FRAME_PCB_MODULE_VIEWER_MODAL );
wxAcceleratorTable table( DIM( accels ), accels );
m_FrameName = GetFootprintViewerFrameName();
......@@ -145,12 +148,8 @@ FOOTPRINT_VIEWER_FRAME::FOOTPRINT_VIEWER_FRAME( KIWAY* aKiway, PCB_BASE_FRAME* a
m_footprintList = new wxListBox( this, ID_MODVIEW_FOOTPRINT_LIST,
wxDefaultPosition, wxDefaultSize, 0, NULL, wxLB_HSCROLL );
m_semaphore = aSemaphore;
m_selectedFootprintName.Empty();
if( m_semaphore )
SetModalMode( true );
SetBoard( new BOARD() );
// Ensure all layers and items are visible:
......@@ -237,7 +236,6 @@ FOOTPRINT_VIEWER_FRAME::FOOTPRINT_VIEWER_FRAME( KIWAY* aKiway, PCB_BASE_FRAME* a
}
#if 0 // no.
// Set min size (overwrite params read in LoadPerspective(), if any)
m_auimgr.GetPane( m_libList ).MinSize( minsize );
m_auimgr.GetPane( m_footprintList ).MinSize( minsize );
......@@ -271,45 +269,16 @@ const wxChar* FOOTPRINT_VIEWER_FRAME::GetFootprintViewerFrameName()
}
FOOTPRINT_VIEWER_FRAME* FOOTPRINT_VIEWER_FRAME::GetActiveFootprintViewer( const KIWAY_PLAYER* aParent )
{
wxASSERT( aParent );
// We search only within the current project, and do so by limiting
// the search scope to a wxWindow hierarchy subset. Find the top most
// KIWAY_PLAYER which is part of this PROJECT by matching its KIWAY* to the
// most immediate parent's.
// NOTE: an open FOOTPRINT_VIEWER_FRAME may have either the PCB_EDIT_FRAME
// or the FOOTPRINT_EDIT_FRAME as parent.
KIWAY* kiway = &aParent->Kiway();
wxWindow* frame;
while( (frame = aParent->GetParent()) != NULL )
{
// will go NULL when we reach a non-KIWAY_PLAYER
KIWAY_PLAYER* kwp = dynamic_cast<KIWAY_PLAYER*>( frame );
if( kwp && &kwp->Kiway() == kiway )
aParent = kwp;
else
break;
}
return (FOOTPRINT_VIEWER_FRAME*) wxWindow::FindWindowByName(
GetFootprintViewerFrameName(), aParent );
}
void FOOTPRINT_VIEWER_FRAME::OnCloseWindow( wxCloseEvent& Event )
{
if( m_semaphore )
if( IsModal() )
{
m_semaphore->Post();
SetModalMode( false );
// This window will be destroyed by the calling function,
// to avoid side effects
// Only dismiss a modal frame once, so that the return values set by
// the prior DismissModal() are not bashed for ShowModal().
if( !IsDismissed() )
DismissModal( false );
// window will be destroyed by the calling function.
}
else
Destroy();
......@@ -464,15 +433,23 @@ void FOOTPRINT_VIEWER_FRAME::ClickOnFootprintList( wxCommandEvent& event )
void FOOTPRINT_VIEWER_FRAME::DClickOnFootprintList( wxCommandEvent& event )
{
if( m_semaphore )
if( IsModal() )
{
// @todo(DICK)
ExportSelectedFootprint( event );
// Prevent the double click from being as a single mouse button release
// event in the parent window which would cause the part to be parked
// rather than staying in mode mode.
// rather than staying in move mode.
// Remember the mouse button will be released in the parent window
// thus creating a mouse button release event which should be ignored
((PCB_BASE_FRAME*)GetParent())->SkipNextLeftButtonReleaseEvent();
PCB_EDIT_FRAME* pcbframe = dynamic_cast<PCB_EDIT_FRAME*>( GetParent() );
// The parent may not be the board editor:
if( pcbframe )
{
pcbframe->SkipNextLeftButtonReleaseEvent();
}
}
}
......@@ -482,9 +459,24 @@ void FOOTPRINT_VIEWER_FRAME::ExportSelectedFootprint( wxCommandEvent& event )
int ii = m_footprintList->GetSelection();
if( ii >= 0 )
m_selectedFootprintName = m_footprintList->GetString( ii );
{
wxString fp_name = m_footprintList->GetString( ii );
// @todo(DICK) assign to static now, later PROJECT retained string.
m_selectedFootprintName = fp_name;
FPID fpid;
fpid.SetLibNickname( GetSelectedLibrary() );
fpid.SetFootprintName( fp_name );
DismissModal( true, fpid.Format() );
}
else
{
m_selectedFootprintName.Empty();
DismissModal( false );
}
Close( true );
}
......@@ -580,25 +572,25 @@ void FOOTPRINT_VIEWER_FRAME::GeneralControl( wxDC* aDC, const wxPoint& aPosition
screen->m_O_Curseur = GetCrossHairPosition();
break;
case WXK_NUMPAD8: /* cursor moved up */
case WXK_NUMPAD8: // cursor moved up
case WXK_UP:
pos.y -= KiROUND( gridSize.y );
m_canvas->MoveCursor( pos );
break;
case WXK_NUMPAD2: /* cursor moved down */
case WXK_NUMPAD2: // cursor moved down
case WXK_DOWN:
pos.y += KiROUND( gridSize.y );
m_canvas->MoveCursor( pos );
break;
case WXK_NUMPAD4: /* cursor moved left */
case WXK_NUMPAD4: // cursor moved left
case WXK_LEFT:
pos.x -= KiROUND( gridSize.x );
m_canvas->MoveCursor( pos );
break;
case WXK_NUMPAD6: /* cursor moved right */
case WXK_NUMPAD6: // cursor moved right
case WXK_RIGHT:
pos.x += KiROUND( gridSize.x );
m_canvas->MoveCursor( pos );
......@@ -621,7 +613,7 @@ void FOOTPRINT_VIEWER_FRAME::GeneralControl( wxDC* aDC, const wxPoint& aPosition
}
}
UpdateStatusBar(); /* Display new cursor coordinates */
UpdateStatusBar(); // Display new cursor coordinates
}
......@@ -746,11 +738,13 @@ void FOOTPRINT_VIEWER_FRAME::SelectCurrentLibrary( wxCommandEvent& event )
void FOOTPRINT_VIEWER_FRAME::SelectCurrentFootprint( wxCommandEvent& event )
{
PCB_EDIT_FRAME* parent = (PCB_EDIT_FRAME*) GetParent();
// The PCB_EDIT_FRAME may not be the FOOTPRINT_VIEW_FRAME's parent,
// so use Kiway().Player() to fetch.
PCB_EDIT_FRAME* parent = (PCB_EDIT_FRAME*) Kiway().Player( FRAME_PCB, true );
wxString libname = m_libraryName + wxT( "." ) + LegacyFootprintLibPathExtension;
MODULE* oldmodule = GetBoard()->m_Modules;
MODULE* module = LoadModuleFromLibrary( libname, parent->FootprintLibs(),
false );
MODULE* module = LoadModuleFromLibrary( libname, parent->FootprintLibs(), false );
if( module )
{
......
pcbnew/modview_frame.h
View file @ 25d1ab40
......@@ -34,7 +34,6 @@
class wxSashLayoutWindow;
class wxListBox;
class wxSemaphore;
class FP_LIB_TABLE;
namespace PCB { struct IFACE; }
......@@ -44,25 +43,13 @@ namespace PCB { struct IFACE; }
*/
class FOOTPRINT_VIEWER_FRAME : public PCB_BASE_FRAME
{
friend struct PCB::IFACE;
private:
wxListBox* m_libList; // The list of libs names
wxListBox* m_footprintList; // The list of footprint names
// Flags
wxSemaphore* m_semaphore; // != NULL if the frame emulates a modal dialog
wxString m_configPath; // subpath for configuration
friend struct PCB::IFACE; // constructor called from here only
protected:
static wxString m_libraryName; // Current selected library
static wxString m_footprintName; // Current selected footprint
static wxString m_selectedFootprintName; // When the viewer is used to select a footprint
// the selected footprint is here
FOOTPRINT_VIEWER_FRAME( KIWAY* aKiway, wxWindow* aParent, FRAME_T aFrameType );
public:
FOOTPRINT_VIEWER_FRAME( KIWAY* aKiway, PCB_BASE_FRAME* aParent, wxSemaphore* aSemaphore = NULL );
public:
~FOOTPRINT_VIEWER_FRAME();
/**
......@@ -72,17 +59,6 @@ public:
*/
static const wxChar* GetFootprintViewerFrameName();
/**
* Function GetActiveFootprintViewer (static)
*
* @param aParent the KIWAY_PLAYER which is the parent of the calling wxWindow.
* This is used to traverse the window hierarchy upwards to the topmost
* KIWAY_PLAYER which is still part of the same project.
*
* @return Any currently opened Footprint viewer or NULL if none.
*/
static FOOTPRINT_VIEWER_FRAME* GetActiveFootprintViewer( const KIWAY_PLAYER* aParent );
wxString& GetSelectedFootprint( void ) const { return m_selectedFootprintName; }
const wxString GetSelectedLibraryFullName();
......@@ -102,8 +78,19 @@ public:
*/
void ReCreateLibraryList();
private:
wxListBox* m_libList; // The list of libs names
wxListBox* m_footprintList; // The list of footprint names
wxString m_configPath; // subpath for configuration
static wxString m_libraryName; // Current selected library
static wxString m_footprintName; // Current selected footprint
static wxString m_selectedFootprintName; // When the viewer is used to select a footprint
void OnSize( wxSizeEvent& event );
void ReCreateFootprintList();
......@@ -193,7 +180,6 @@ private:
void SaveCopyInUndoList( BOARD_ITEM*, UNDO_REDO_T, const wxPoint& ) {}
void SaveCopyInUndoList( const PICKED_ITEMS_LIST&, UNDO_REDO_T, const wxPoint &) {}
DECLARE_EVENT_TABLE()
};
......
pcbnew/pcbframe.cpp
View file @ 25d1ab40
......@@ -152,8 +152,6 @@ BEGIN_EVENT_TABLE( PCB_EDIT_FRAME, PCB_BASE_FRAME )
EVT_MENU( ID_PCB_DISPLAY_OPTIONS_SETUP, PCB_EDIT_FRAME::InstallDisplayOptionsDialog )
EVT_MENU( ID_PCB_USER_GRID_SETUP, PCB_EDIT_FRAME::Process_Special_Functions )
EVT_MENU_RANGE( ID_LANGUAGE_CHOICE, ID_LANGUAGE_CHOICE_END, PCB_EDIT_FRAME::SetLanguage )
// menu Postprocess
EVT_MENU( ID_PCB_GEN_POS_MODULES_FILE, PCB_EDIT_FRAME::GenFootprintsPositionFile )
EVT_MENU( ID_PCB_GEN_DRILL_FILE, PCB_EDIT_FRAME::InstallDrillFrame )
......@@ -1024,9 +1022,11 @@ void PCB_EDIT_FRAME::SetVisibleAlls()
}
void PCB_EDIT_FRAME::SetLanguage( wxCommandEvent& event )
void PCB_EDIT_FRAME::ShowChangedLanguage()
{
EDA_DRAW_FRAME::SetLanguage( event );
// call my base class
PCB_BASE_FRAME::ShowChangedLanguage();
m_Layers->SetLayersManagerTabsText();
wxAuiPaneInfo& pane_info = m_auimgr.GetPane( m_Layers );
......@@ -1034,10 +1034,6 @@ void PCB_EDIT_FRAME::SetLanguage( wxCommandEvent& event )
pane_info.Caption( _( "Visibles" ) );
m_auimgr.Update();
ReFillLayerWidget();
FOOTPRINT_EDIT_FRAME* moduleEditFrame = FOOTPRINT_EDIT_FRAME::GetActiveFootprintEditor( this );
if( moduleEditFrame )
moduleEditFrame->EDA_DRAW_FRAME::SetLanguage( event );
}
......
pcbnew/pcbnew.cpp
View file @ 25d1ab40
......@@ -60,6 +60,7 @@
#include <fp_lib_table.h>
#include <module_editor_frame.h>
#include <modview_frame.h>
#include <footprint_wizard_frame.h>
// Colors for layers and items
......@@ -109,7 +110,6 @@ static struct IFACE : public KIFACE_I
{
switch( aClassId )
{
case FRAME_PCB:
{
PCB_EDIT_FRAME* frame = new PCB_EDIT_FRAME( aKiway, aParent );
......@@ -132,11 +132,7 @@ static struct IFACE : public KIFACE_I
case FRAME_PCB_MODULE_EDITOR:
{
// yuck:
PCB_EDIT_FRAME* editor = dynamic_cast<PCB_EDIT_FRAME*>( aParent );
wxASSERT( editor );
FOOTPRINT_EDIT_FRAME* frame = new FOOTPRINT_EDIT_FRAME( aKiway, editor );
FOOTPRINT_EDIT_FRAME* frame = new FOOTPRINT_EDIT_FRAME( aKiway, aParent );
frame->Zoom_Automatique( true );
......@@ -148,12 +144,10 @@ static struct IFACE : public KIFACE_I
break;
case FRAME_PCB_MODULE_VIEWER:
case FRAME_PCB_MODULE_VIEWER_MODAL:
{
// yuck:
PCB_BASE_FRAME* editor = dynamic_cast<PCB_BASE_FRAME*>( aParent );
wxASSERT( editor );
FOOTPRINT_VIEWER_FRAME* frame = new FOOTPRINT_VIEWER_FRAME( aKiway, editor );
FOOTPRINT_VIEWER_FRAME* frame = new FOOTPRINT_VIEWER_FRAME(
aKiway, aParent, FRAME_T( aClassId ) );
frame->Zoom_Automatique( true );
......@@ -164,6 +158,15 @@ static struct IFACE : public KIFACE_I
}
break;
case FRAME_PCB_FOOTPRINT_WIZARD_MODAL:
{
FOOTPRINT_WIZARD_FRAME* frame = new FOOTPRINT_WIZARD_FRAME(
aKiway, aParent, FRAME_T( aClassId ) );
return frame;
}
break;
default:
;
}
......
pcbnew/pcbnew_config.cpp
View file @ 25d1ab40
......@@ -142,7 +142,7 @@ void PCB_EDIT_FRAME::Process_Config( wxCommandEvent& event )
FOOTPRINT_VIEWER_FRAME* viewer;
if( tableChanged && (viewer = FOOTPRINT_VIEWER_FRAME::GetActiveFootprintViewer( this )) != NULL )
if( tableChanged && (viewer = (FOOTPRINT_VIEWER_FRAME*)Kiway().Player( FRAME_PCB_MODULE_VIEWER, false )) != NULL )
{
viewer->ReCreateLibraryList();
}
......
pcbnew/tool_modview.cpp
View file @ 25d1ab40
......@@ -95,9 +95,8 @@ void FOOTPRINT_VIEWER_FRAME::ReCreateHToolbar()
m_mainToolBar->AddTool( ID_ZOOM_PAGE, wxEmptyString,
KiBitmap( zoom_fit_in_page_xpm ), msg );
// Enable this tool only if the library browser is called from
// a "load component" command
if( m_semaphore )
// Enable this tool only if the library browser is intended for modal use.
if( m_Ident == FRAME_PCB_MODULE_VIEWER_MODAL )
{
m_mainToolBar->AddSeparator();
m_mainToolBar->AddTool( ID_MODVIEW_FOOTPRINT_EXPORT_TO_BOARD, wxEmptyString,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment