Skip to content

X
x393_sata
Commit e4816b14 authored by Alexey Grebenkin's avatar Alexey Grebenkin
Browse files
Options

Few more changes to make the project synth in vdt enviroment

parent ec00bd28
Expand all Show whitespace changes
Inline Side-by-side
Showing with 4317 additions and 26 deletions
ddr3/1024Mb_ddr3_parameters.vh 0 → 120000
View file @ e4816b14
/home/alexey/tmp/sata2/x393/ddr3/1024Mb_ddr3_parameters.vh
\ No newline at end of file
ddr3/2048Mb_ddr3_parameters.vh 0 → 120000
View file @ e4816b14
/home/alexey/tmp/sata2/x393/ddr3/2048Mb_ddr3_parameters.vh
\ No newline at end of file
ddr3/4096Mb_ddr3_parameters.vh 0 → 120000
View file @ e4816b14
/home/alexey/tmp/sata2/x393/ddr3/4096Mb_ddr3_parameters.vh
\ No newline at end of file
dma/sata_top.v
View file @ e4816b14
......@@ -84,7 +84,7 @@
output wire [3:0] afi_awcache,
output wire [2:0] afi_awprot,
output wire [3:0] afi_awlen,
output wire [2:0] afi_awsize,
output wire [1:0] afi_awsize,
output wire [1:0] afi_awburst,
output wire [3:0] afi_awqos,
// write data
......@@ -113,7 +113,7 @@
output wire [3:0] afi_arcache,
output wire [2:0] afi_arprot,
output wire [3:0] afi_arlen,
output wire [2:0] afi_arsize,
output wire [1:0] afi_arsize,
output wire [1:0] afi_arburst,
output wire [3:0] afi_arqos,
// read data
......
dma/top.v
View file @ e4816b14
......@@ -90,7 +90,7 @@ wire [ 1:0] afi0_awlock; // output[1:0]
wire [ 3:0] afi0_awcache; // output[3:0]
wire [ 2:0] afi0_awprot; // output[2:0]
wire [ 3:0] afi0_awlen; // output[3:0]
wire [ 2:0] afi0_awsize; // output[2:0]
wire [ 1:0] afi0_awsize; // output[2:0]
wire [ 1:0] afi0_awburst; // output[1:0]
wire [ 3:0] afi0_awqos; // output[3:0]
wire [63:0] afi0_wdata; // output[63:0]
......@@ -114,7 +114,7 @@ wire [ 1:0] afi0_arlock; // output[1:0]
wire [ 3:0] afi0_arcache; // output[3:0]
wire [ 2:0] afi0_arprot; // output[2:0]
wire [ 3:0] afi0_arlen; // output[3:0]
wire [ 2:0] afi0_arsize; // output[2:0]
wire [ 1:0] afi0_arsize; // output[2:0]
wire [ 1:0] afi0_arburst; // output[1:0]
wire [ 3:0] afi0_arqos; // output[3:0]
wire [63:0] afi0_rdata; // input[63:0]
......
includes/coring.dat.vh 0 → 100644
View file @ e4816b14
, .INIT_00 (256'h4444444433333333333333332222222222222222111111111111111100000000)
, .INIT_01 (256'h8888888877777777777777776666666666666666555555555555555544444444)
, .INIT_02 (256'hCCCCCCCCBBBBBBBBBBBBBBBBAAAAAAAAAAAAAAAA999999999999999988888888)
, .INIT_03 (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCC)
, .INIT_04 (256'h4444444433333333333333332222222222222222111111111111111100000000)
, .INIT_05 (256'h8888888877777777777777776666666666666666555555555555555544444444)
, .INIT_06 (256'hCCCCCCCCBBBBBBBBBBBBBBBBAAAAAAAAAAAAAAAA999999999999999988888888)
, .INIT_07 (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCC)
, .INIT_08 (256'h4444444433333333333333322222222222222221111111111111100000000000)
, .INIT_09 (256'h8888888877777777777777776666666666666666555555555555555544444444)
, .INIT_0A (256'hCCCCCCCCBBBBBBBBBBBBBBBBAAAAAAAAAAAAAAAA999999999999999988888888)
, .INIT_0B (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCC)
, .INIT_0C (256'h4444444433333333333333322222222222222221111111111111100000000000)
, .INIT_0D (256'h8888888877777777777777776666666666666666555555555555555544444444)
, .INIT_0E (256'hCCCCCCCCBBBBBBBBBBBBBBBBAAAAAAAAAAAAAAAA999999999999999988888888)
, .INIT_0F (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCC)
, .INIT_10 (256'h4444444333333333333333322222222222222211111111111000000000000000)
, .INIT_11 (256'h8888888877777777777777776666666666666666555555555555555444444444)
, .INIT_12 (256'hCCCCCCCCBBBBBBBBBBBBBBBBAAAAAAAAAAAAAAAA999999999999999988888888)
, .INIT_13 (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCC)
, .INIT_14 (256'h4444444333333333333333322222222222222211111111111000000000000000)
, .INIT_15 (256'h8888888877777777777777776666666666666666555555555555555444444444)
, .INIT_16 (256'hCCCCCCCCBBBBBBBBBBBBBBBBAAAAAAAAAAAAAAAA999999999999999988888888)
, .INIT_17 (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCC)
, .INIT_18 (256'h4444443333333333333222222222211111111111100000000000000000000000)
, .INIT_19 (256'h8888888877777777777777766666666666666665555555555555555444444444)
, .INIT_1A (256'hCCCCCCCCBBBBBBBBBBBBBBBBAAAAAAAAAAAAAAAA999999999999999988888888)
, .INIT_1B (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCC)
, .INIT_1C (256'h4444443333333333333222222222211111111111100000000000000000000000)
, .INIT_1D (256'h8888888877777777777777766666666666666665555555555555555444444444)
, .INIT_1E (256'hCCCCCCCCBBBBBBBBBBBBBBBBAAAAAAAAAAAAAAAA999999999999999988888888)
, .INIT_1F (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCC)
, .INIT_20 (256'h3333333332222222222211111111111111000000000000000000000000000000)
, .INIT_21 (256'h8888888777777777777777766666666666666665555555555555544444444444)
, .INIT_22 (256'hCCCCCCCCBBBBBBBBBBBBBBBBAAAAAAAAAAAAAAAA999999999999999888888888)
, .INIT_23 (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCC)
, .INIT_24 (256'h3333333332222222222211111111111111000000000000000000000000000000)
, .INIT_25 (256'h8888888777777777777777766666666666666665555555555555544444444444)
, .INIT_26 (256'hCCCCCCCCBBBBBBBBBBBBBBBBAAAAAAAAAAAAAAAA999999999999999888888888)
, .INIT_27 (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCC)
, .INIT_28 (256'h2222222222211111111111111110000000000000000000000000000000000000)
, .INIT_29 (256'h8888888777777777777777666666666666655555555554444444443333333333)
, .INIT_2A (256'hCCCCCCCCBBBBBBBBBBBBBBBAAAAAAAAAAAAAAAA9999999999999999888888888)
, .INIT_2B (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCC)
, .INIT_2C (256'h2222222222211111111111111110000000000000000000000000000000000000)
, .INIT_2D (256'h8888888777777777777777666666666666655555555554444444443333333333)
, .INIT_2E (256'hCCCCCCCCBBBBBBBBBBBBBBBAAAAAAAAAAAAAAAA9999999999999999888888888)
, .INIT_2F (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCC)
, .INIT_31 (256'h5555444444443333333333322222222222221111111111111111111111110000)
, .INIT_32 (256'hCCCCCCCBBBBBBBBBBBBBBAAAAAAAAA9999999998888888777777766666665555)
, .INIT_33 (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCCC)
, .INIT_35 (256'h5555444444443333333333322222222222221111111111111111111111110000)
, .INIT_36 (256'hCCCCCCCBBBBBBBBBBBBBBAAAAAAAAA9999999998888888777777766666665555)
, .INIT_37 (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCCC)
, .INIT_3B (256'hFFFFFFFFFEEDCBA9987766555444333332222222211111111111111111111100)
, .INIT_3F (256'hFFFFFFFFFEEDCBA9987766555444333332222222211111111111111111111100)
includes/focus_filt.dat.vh 0 → 100644
View file @ e4816b14
, .INIT_00 (256'h000008880FFF0FFF0888044401110111000008880FFF0FFF0888044401110000)
, .INIT_01 (256'h00000222044408880FFF0FFF088808880000044408880FFF0FFF088804440444)
, .INIT_02 (256'h0000000001110222044408880FFF0FFF000001110222044408880FFF0FFF0FFF)
, .INIT_03 (256'h0000000000000000000000000000000000000000000001110222044408880888)
, .INIT_04 (256'h00008888FFFFFFFF888844441111111100008888FFFFFFFF8888444411110000)
, .INIT_05 (256'h0000222244448888FFFFFFFF88888888000044448888FFFFFFFF888844444444)
, .INIT_06 (256'h000000001111222244448888FFFFFFFF00001111222244448888FFFFFFFFFFFF)
, .INIT_07 (256'h0000000000000000000000000000000000000000000011112222444488888888)
includes/huffman.dat.vh 0 → 100644
View file @ e4816b14
, .INIT_00 (256'h000800F8000700780005001A0004000B0003000400020001000200000004000A)
, .INIT_01 (256'h00020000000000000000000000000000000000000010FF830010FF82000A03F6)
, .INIT_02 (256'h0010FF850010FF84000B07F6000901F6000700790005001B0004000C00000000)
, .INIT_03 (256'h00030002000000000000000000000000000000000010FF880010FF870010FF86)
, .INIT_04 (256'h0010FF8B0010FF8A0010FF89000C0FF4000A03F7000800F90005001C00000000)
, .INIT_05 (256'h00030003000000000000000000000000000000000010FF8E0010FF8D0010FF8C)
, .INIT_06 (256'h0010FF920010FF910010FF900010FF8F000C0FF5000901F70006003A00000000)
, .INIT_07 (256'h00030004000000000000000000000000000000000010FF950010FF940010FF93)
, .INIT_08 (256'h0010FF9A0010FF990010FF980010FF970010FF96000A03F80006003B00000000)
, .INIT_09 (256'h00030005000000000000000000000000000000000010FF9D0010FF9C0010FF9B)
, .INIT_0A (256'h0010FFA20010FFA10010FFA00010FF9F0010FF9E000B07F70007007A00000000)
, .INIT_0B (256'h00030006000000000000000000000000000000000010FFA50010FFA40010FFA3)
, .INIT_0C (256'h0010FFAA0010FFA90010FFA80010FFA70010FFA6000C0FF60007007B00000000)
, .INIT_0D (256'h0004000E000000000000000000000000000000000010FFAD0010FFAC0010FFAB)
, .INIT_0E (256'h0010FFB20010FFB10010FFB00010FFAF0010FFAE000C0FF7000800FA00000000)
, .INIT_0F (256'h0005001E000000000000000000000000000000000010FFB50010FFB40010FFB3)
, .INIT_10 (256'h0010FFBA0010FFB90010FFB80010FFB70010FFB6000F7FC0000901F800000000)
, .INIT_11 (256'h0006003E000000000000000000000000000000000010FFBD0010FFBC0010FFBB)
, .INIT_12 (256'h0010FFC30010FFC20010FFC10010FFC00010FFBF0010FFBE000901F900000000)
, .INIT_13 (256'h0007007E000000000000000000000000000000000010FFC60010FFC50010FFC4)
, .INIT_14 (256'h0010FFCC0010FFCB0010FFCA0010FFC90010FFC80010FFC7000901FA00000000)
, .INIT_15 (256'h000800FE000000000000000000000000000000000010FFCF0010FFCE0010FFCD)
, .INIT_16 (256'h0010FFD50010FFD40010FFD30010FFD20010FFD10010FFD0000A03F900000000)
, .INIT_17 (256'h000901FE000000000000000000000000000000000010FFD80010FFD70010FFD6)
, .INIT_18 (256'h0010FFDE0010FFDD0010FFDC0010FFDB0010FFDA0010FFD9000A03FA00000000)
, .INIT_19 (256'h00000000000000000000000000000000000000000010FFE10010FFE00010FFDF)
, .INIT_1A (256'h0010FFE70010FFE60010FFE50010FFE40010FFE30010FFE2000B07F800000000)
, .INIT_1B (256'h00000000000000000000000000000000000000000010FFEA0010FFE90010FFE8)
, .INIT_1C (256'h0010FFF10010FFF00010FFEF0010FFEE0010FFED0010FFEC0010FFEB00000000)
, .INIT_1D (256'h00000000000000000000000000000000000000000010FFF40010FFF30010FFF2)
, .INIT_1E (256'h0010FFFB0010FFFA0010FFF90010FFF80010FFF70010FFF60010FFF5000B07F9)
, .INIT_1F (256'h00000000000000000000000000000000000000000010FFFE0010FFFD0010FFFC)
, .INIT_20 (256'h000700780006003800050019000500180004000A000300040002000100020000)
, .INIT_21 (256'h0002000000000000000000000000000000000000000C0FF4000A03F6000901F4)
, .INIT_22 (256'h0010FF88000C0FF5000B07F6000901F5000800F6000600390004000B00000000)
, .INIT_23 (256'h00020001000000000000000000000000000000000010FF8B0010FF8A0010FF89)
, .INIT_24 (256'h0010FF8D0010FF8C000F7FC2000C0FF6000A03F7000800F70005001A00000000)
, .INIT_25 (256'h00020002000000000000000000000000000000000010FF900010FF8F0010FF8E)
, .INIT_26 (256'h0010FF930010FF920010FF91000C0FF7000A03F8000800F80005001B00000000)
, .INIT_27 (256'h00030006000000000000000000000000000000000010FF960010FF950010FF94)
, .INIT_28 (256'h0010FF9B0010FF9A0010FF990010FF980010FF97000901F60006003A00000000)
, .INIT_29 (256'h0004000E000000000000000000000000000000000010FF9E0010FF9D0010FF9C)
, .INIT_2A (256'h0010FFA30010FFA20010FFA10010FFA00010FF9F000A03F90006003B00000000)
, .INIT_2B (256'h0005001E000000000000000000000000000000000010FFA60010FFA50010FFA4)
, .INIT_2C (256'h0010FFAB0010FFAA0010FFA90010FFA80010FFA7000B07F70007007900000000)
, .INIT_2D (256'h0006003E000000000000000000000000000000000010FFAE0010FFAD0010FFAC)
, .INIT_2E (256'h0010FFB30010FFB20010FFB10010FFB00010FFAF000B07F80007007A00000000)
, .INIT_2F (256'h0007007E000000000000000000000000000000000010FFB60010FFB50010FFB4)
, .INIT_30 (256'h0010FFBC0010FFBB0010FFBA0010FFB90010FFB80010FFB7000800F900000000)
, .INIT_31 (256'h000800FE000000000000000000000000000000000010FFBF0010FFBE0010FFBD)
, .INIT_32 (256'h0010FFC50010FFC40010FFC30010FFC20010FFC10010FFC0000901F700000000)
, .INIT_33 (256'h000901FE000000000000000000000000000000000010FFC80010FFC70010FFC6)
, .INIT_34 (256'h0010FFCE0010FFCD0010FFCC0010FFCB0010FFCA0010FFC9000901F800000000)
, .INIT_35 (256'h000A03FE000000000000000000000000000000000010FFD10010FFD00010FFCF)
, .INIT_36 (256'h0010FFD70010FFD60010FFD50010FFD40010FFD30010FFD2000901F900000000)
, .INIT_37 (256'h000B07FE000000000000000000000000000000000010FFDA0010FFD90010FFD8)
, .INIT_38 (256'h0010FFE00010FFDF0010FFDE0010FFDD0010FFDC0010FFDB000901FA00000000)
, .INIT_39 (256'h00000000000000000000000000000000000000000010FFE30010FFE20010FFE1)
, .INIT_3A (256'h0010FFE90010FFE80010FFE70010FFE60010FFE50010FFE4000B07F900000000)
, .INIT_3B (256'h00000000000000000000000000000000000000000010FFEC0010FFEB0010FFEA)
, .INIT_3C (256'h0010FFF20010FFF10010FFF00010FFEF0010FFEE0010FFED000E3FE000000000)
, .INIT_3D (256'h00000000000000000000000000000000000000000010FFF50010FFF40010FFF3)
, .INIT_3E (256'h0010FFFB0010FFFA0010FFF90010FFF80010FFF70010FFF6000F7FC3000A03FA)
, .INIT_3F (256'h00000000000000000000000000000000000000000010FFFE0010FFFD0010FFFC)
includes/linear1028rgb.dat.vh 0 → 100644
View file @ e4816b14
This diff is collapsed.
includes/quantization_100.dat.vh 0 → 100644
View file @ e4816b14
, .INIT_00 (256'hFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
, .INIT_01 (256'hFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
, .INIT_02 (256'hFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
, .INIT_03 (256'hFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
, .INIT_04 (256'hFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
, .INIT_05 (256'hFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
, .INIT_06 (256'hFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
, .INIT_07 (256'hFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
, .INIT_08 (256'h2000333040005550555040005550555055505550800080005550800080005550)
, .INIT_09 (256'h19A017401550155019A0155020002AB02490249019A033304000400033303330)
, .INIT_0A (256'h0F1010000BA010001740174012500F10125013B010000E40125013B017401740)
, .INIT_0B (256'h0CD00C300CD00E400AB00CD00BA00AB00B20111015500C300C300C300CD00D80)
, .INIT_0C (256'h0CD00CD013B0174013B00CD01C70333033301C70333040003330400040005550)
, .INIT_0D (256'h0CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD0)
, .INIT_0E (256'h0CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD0)
, .INIT_0F (256'h0CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD0)
includes/ram18_declare_init.vh 0 → 100644
View file @ e4816b14
parameter INITP_00 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_01 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_02 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_03 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_04 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_05 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_06 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_07 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_00 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_01 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_02 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_03 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_04 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_05 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_06 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_07 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_08 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_09 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_0A = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_0B = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_0C = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_0D = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_0E = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_0F = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_10 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_11 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_12 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_13 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_14 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_15 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_16 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_17 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_18 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_19 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_1A = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_1B = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_1C = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_1D = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_1E = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_1F = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_20 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_21 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_22 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_23 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_24 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_25 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_26 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_27 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_28 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_29 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_2A = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_2B = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_2C = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_2D = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_2E = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_2F = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_30 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_31 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_32 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_33 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_34 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_35 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_36 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_37 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_38 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_39 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_3A = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_3B = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_3C = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_3D = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_3E = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_3F = 256'h0000000000000000000000000000000000000000000000000000000000000000
includes/ram18_pass_init.vh 0 → 100644
View file @ e4816b14
, .INITP_00 (INITP_00)
, .INITP_01 (INITP_01)
, .INITP_02 (INITP_02)
, .INITP_03 (INITP_03)
, .INITP_04 (INITP_04)
, .INITP_05 (INITP_05)
, .INITP_06 (INITP_06)
, .INITP_07 (INITP_07)
, .INIT_00 (INIT_00)
, .INIT_01 (INIT_01)
, .INIT_02 (INIT_02)
, .INIT_03 (INIT_03)
, .INIT_04 (INIT_04)
, .INIT_05 (INIT_05)
, .INIT_06 (INIT_06)
, .INIT_07 (INIT_07)
, .INIT_08 (INIT_08)
, .INIT_09 (INIT_09)
, .INIT_0A (INIT_0A)
, .INIT_0B (INIT_0B)
, .INIT_0C (INIT_0C)
, .INIT_0D (INIT_0D)
, .INIT_0E (INIT_0E)
, .INIT_0F (INIT_0F)
, .INIT_10 (INIT_10)
, .INIT_11 (INIT_11)
, .INIT_12 (INIT_12)
, .INIT_13 (INIT_13)
, .INIT_14 (INIT_14)
, .INIT_15 (INIT_15)
, .INIT_16 (INIT_16)
, .INIT_17 (INIT_17)
, .INIT_18 (INIT_18)
, .INIT_19 (INIT_19)
, .INIT_1A (INIT_1A)
, .INIT_1B (INIT_1B)
, .INIT_1C (INIT_1C)
, .INIT_1D (INIT_1D)
, .INIT_1E (INIT_1E)
, .INIT_1F (INIT_1F)
, .INIT_20 (INIT_20)
, .INIT_21 (INIT_21)
, .INIT_22 (INIT_22)
, .INIT_23 (INIT_23)
, .INIT_24 (INIT_24)
, .INIT_25 (INIT_25)
, .INIT_26 (INIT_26)
, .INIT_27 (INIT_27)
, .INIT_28 (INIT_28)
, .INIT_29 (INIT_29)
, .INIT_2A (INIT_2A)
, .INIT_2B (INIT_2B)
, .INIT_2C (INIT_2C)
, .INIT_2D (INIT_2D)
, .INIT_2E (INIT_2E)
, .INIT_2F (INIT_2F)
, .INIT_30 (INIT_30)
, .INIT_31 (INIT_31)
, .INIT_32 (INIT_32)
, .INIT_33 (INIT_33)
, .INIT_34 (INIT_34)
, .INIT_35 (INIT_35)
, .INIT_36 (INIT_36)
, .INIT_37 (INIT_37)
, .INIT_38 (INIT_38)
, .INIT_39 (INIT_39)
, .INIT_3A (INIT_3A)
, .INIT_3B (INIT_3B)
, .INIT_3C (INIT_3C)
, .INIT_3D (INIT_3D)
, .INIT_3E (INIT_3E)
, .INIT_3F (INIT_3F)
includes/ram36_declare_init.vh 0 → 100644
View file @ e4816b14
This diff is collapsed.
includes/ram36_pass_init.vh 0 → 100644
View file @ e4816b14
, .INITP_00 (INITP_00)
, .INITP_01 (INITP_01)
, .INITP_02 (INITP_02)
, .INITP_03 (INITP_03)
, .INITP_04 (INITP_04)
, .INITP_05 (INITP_05)
, .INITP_06 (INITP_06)
, .INITP_07 (INITP_07)
, .INITP_08 (INITP_08)
, .INITP_09 (INITP_09)
, .INITP_0A (INITP_0A)
, .INITP_0B (INITP_0B)
, .INITP_0C (INITP_0C)
, .INITP_0D (INITP_0D)
, .INITP_0E (INITP_0E)
, .INITP_0F (INITP_0F)
, .INIT_00 (INIT_00)
, .INIT_01 (INIT_01)
, .INIT_02 (INIT_02)
, .INIT_03 (INIT_03)
, .INIT_04 (INIT_04)
, .INIT_05 (INIT_05)
, .INIT_06 (INIT_06)
, .INIT_07 (INIT_07)
, .INIT_08 (INIT_08)
, .INIT_09 (INIT_09)
, .INIT_0A (INIT_0A)
, .INIT_0B (INIT_0B)
, .INIT_0C (INIT_0C)
, .INIT_0D (INIT_0D)
, .INIT_0E (INIT_0E)
, .INIT_0F (INIT_0F)
, .INIT_10 (INIT_10)
, .INIT_11 (INIT_11)
, .INIT_12 (INIT_12)
, .INIT_13 (INIT_13)
, .INIT_14 (INIT_14)
, .INIT_15 (INIT_15)
, .INIT_16 (INIT_16)
, .INIT_17 (INIT_17)
, .INIT_18 (INIT_18)
, .INIT_19 (INIT_19)
, .INIT_1A (INIT_1A)
, .INIT_1B (INIT_1B)
, .INIT_1C (INIT_1C)
, .INIT_1D (INIT_1D)
, .INIT_1E (INIT_1E)
, .INIT_1F (INIT_1F)
, .INIT_20 (INIT_20)
, .INIT_21 (INIT_21)
, .INIT_22 (INIT_22)
, .INIT_23 (INIT_23)
, .INIT_24 (INIT_24)
, .INIT_25 (INIT_25)
, .INIT_26 (INIT_26)
, .INIT_27 (INIT_27)
, .INIT_28 (INIT_28)
, .INIT_29 (INIT_29)
, .INIT_2A (INIT_2A)
, .INIT_2B (INIT_2B)
, .INIT_2C (INIT_2C)
, .INIT_2D (INIT_2D)
, .INIT_2E (INIT_2E)
, .INIT_2F (INIT_2F)
, .INIT_30 (INIT_30)
, .INIT_31 (INIT_31)
, .INIT_32 (INIT_32)
, .INIT_33 (INIT_33)
, .INIT_34 (INIT_34)
, .INIT_35 (INIT_35)
, .INIT_36 (INIT_36)
, .INIT_37 (INIT_37)
, .INIT_38 (INIT_38)
, .INIT_39 (INIT_39)
, .INIT_3A (INIT_3A)
, .INIT_3B (INIT_3B)
, .INIT_3C (INIT_3C)
, .INIT_3D (INIT_3D)
, .INIT_3E (INIT_3E)
, .INIT_3F (INIT_3F)
, .INIT_40 (INIT_40)
, .INIT_41 (INIT_41)
, .INIT_42 (INIT_42)
, .INIT_43 (INIT_43)
, .INIT_44 (INIT_44)
, .INIT_45 (INIT_45)
, .INIT_46 (INIT_46)
, .INIT_47 (INIT_47)
, .INIT_48 (INIT_48)
, .INIT_49 (INIT_49)
, .INIT_4A (INIT_4A)
, .INIT_4B (INIT_4B)
, .INIT_4C (INIT_4C)
, .INIT_4D (INIT_4D)
, .INIT_4E (INIT_4E)
, .INIT_4F (INIT_4F)
, .INIT_50 (INIT_50)
, .INIT_51 (INIT_51)
, .INIT_52 (INIT_52)
, .INIT_53 (INIT_53)
, .INIT_54 (INIT_54)
, .INIT_55 (INIT_55)
, .INIT_56 (INIT_56)
, .INIT_57 (INIT_57)
, .INIT_58 (INIT_58)
, .INIT_59 (INIT_59)
, .INIT_5A (INIT_5A)
, .INIT_5B (INIT_5B)
, .INIT_5C (INIT_5C)
, .INIT_5D (INIT_5D)
, .INIT_5E (INIT_5E)
, .INIT_5F (INIT_5F)
, .INIT_60 (INIT_60)
, .INIT_61 (INIT_61)
, .INIT_62 (INIT_62)
, .INIT_63 (INIT_63)
, .INIT_64 (INIT_64)
, .INIT_65 (INIT_65)
, .INIT_66 (INIT_66)
, .INIT_67 (INIT_67)
, .INIT_68 (INIT_68)
, .INIT_69 (INIT_69)
, .INIT_6A (INIT_6A)
, .INIT_6B (INIT_6B)
, .INIT_6C (INIT_6C)
, .INIT_6D (INIT_6D)
, .INIT_6E (INIT_6E)
, .INIT_6F (INIT_6F)
, .INIT_70 (INIT_70)
, .INIT_71 (INIT_71)
, .INIT_72 (INIT_72)
, .INIT_73 (INIT_73)
, .INIT_74 (INIT_74)
, .INIT_75 (INIT_75)
, .INIT_76 (INIT_76)
, .INIT_77 (INIT_77)
, .INIT_78 (INIT_78)
, .INIT_79 (INIT_79)
, .INIT_7A (INIT_7A)
, .INIT_7B (INIT_7B)
, .INIT_7C (INIT_7C)
, .INIT_7D (INIT_7D)
, .INIT_7E (INIT_7E)
, .INIT_7F (INIT_7F)
includes/tasks_tests_memory.vh 0 → 100644
View file @ e4816b14
This diff is collapsed.
includes/x393_cur_params_target.vh 0 → 100644
View file @ e4816b14
/*******************************************************************************
* File: x393_cur_params_target.vh
* Date:2015-02-07
* Author: Andrey Filippov
* Description: Memory controller parameters that need adjustment during training
* Target ,pde
* Copyright (c) 2015 Elphel, Inc.
* x393_cur_params_target.vh is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* x393_cur_params_target.vh is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
localparam DLY_LANE0_ODELAY = 80'hd85c1014141814181218;
localparam DLY_LANE0_IDELAY = 72'h2c7a8380897c807b88;
localparam DLY_LANE1_ODELAY = 80'hd8581812181418181814;
localparam DLY_LANE1_IDELAY = 72'h108078807a887c8280;
localparam DLY_CMDA = 256'hd3d3d3d4dcd1d8cc494949494949494949d4d3ccd3d3dbd4ccd4d2d3d1d2d8cc;
localparam DLY_PHASE = 8'h33;
// localparam DFLT_WBUF_DELAY = 4'h9;
\ No newline at end of file
includes/x393_localparams.vh 0 → 100644
View file @ e4816b14
This diff is collapsed.
includes/x393_mcontr_encode_cmd.vh 0 → 100644
View file @ e4816b14
/*******************************************************************************
* File: x393_mcontr_encode_cmd.vh
* Date:2015-02-09
* Author: Andrey Filippov
* Description: Functions used to encode memory controller sequences
*
* Copyright (c) 2015 Elphel, Inc.
* x393_mcontr_encode_cmd.vh is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* x393_mcontr_encode_cmd.vh is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
function [31:0] func_encode_skip;
input [CMD_PAUSE_BITS-1:0] skip; // number of extra cycles to skip (and keep all the other outputs)
input done; // end of sequence
input [2:0] bank; // bank (here OK to be any)
input odt_en; // enable ODT
input cke; // disable CKE
input sel; // first/second half-cycle, other will be nop (cke+odt applicable to both)
input dq_en; // enable (not tristate) DQ lines (internal timing sequencer for 0->1 and 1->0)
input dqs_en; // enable (not tristate) DQS lines (internal timing sequencer for 0->1 and 1->0)
input dqs_toggle; // enable toggle DQS according to the pattern
input dci; // DCI disable, both DQ and DQS lines (internal logic and timing sequencer for 0->1 and 1->0)
input buf_wr; // connect to external buffer (but only if not paused)
input buf_rd; // connect to external buffer (but only if not paused)
input buf_rst; // connect to external buffer (but only if not paused)
begin
func_encode_skip= func_encode_cmd (
{{14-CMD_DONE_BIT{1'b0}}, done, skip[CMD_PAUSE_BITS-1:0]}, // 15-bit row/column address
bank[2:0], // bank (here OK to be any)
3'b0, // RAS/CAS/WE, positive logic
odt_en, // enable ODT
cke, // disable CKE
sel, // first/second half-cycle, other will be nop (cke+odt applicable to both)
dq_en, // enable (not tristate) DQ lines (internal timing sequencer for 0->1 and 1->0)
dqs_en, // enable (not tristate) DQS lines (internal timing sequencer for 0->1 and 1->0)
dqs_toggle, // enable toggle DQS according to the pattern
dci, // DCI disable, both DQ and DQS lines (internal logic and timing sequencer for 0->1 and 1->0)
buf_wr, // connect to external buffer (but only if not paused)
buf_rd, // connect to external buffer (but only if not paused)
1'b0, // nop
buf_rst);
end
endfunction
function [31:0] func_encode_cmd;
input [14:0] addr; // 15-bit row/column address
input [2:0] bank; // bank (here OK to be any)
input [2:0] rcw; // RAS/CAS/WE, positive logic
input odt_en; // enable ODT
input cke; // disable CKE
input sel; // first/second half-cycle, other will be nop (cke+odt applicable to both)
input dq_en; // enable (not tristate) DQ lines (internal timing sequencer for 0->1 and 1->0)
input dqs_en; // enable (not tristate) DQS lines (internal timing sequencer for 0->1 and 1->0)
input dqs_toggle; // enable toggle DQS according to the pattern
input dci; // DCI disable, both DQ and DQS lines (internal logic and timing sequencer for 0->1 and 1->0)
input buf_wr; // connect to external buffer (but only if not paused)
input buf_rd; // connect to external buffer (but only if not paused)
input nop; // add NOP after the current command, keep other data
input buf_rst; // connect to external buffer (but only if not paused)
begin
func_encode_cmd={
addr[14:0], // 15-bit row/column address
bank [2:0], // bank
rcw[2:0], // RAS/CAS/WE
odt_en, // enable ODT
cke, // may be optimized (removed from here)?
sel, // first/second half-cycle, other will be nop (cke+odt applicable to both)
dq_en, // enable (not tristate) DQ lines (internal timing sequencer for 0->1 and 1->0)
dqs_en, // enable (not tristate) DQS lines (internal timing sequencer for 0->1 and 1->0)
dqs_toggle, // enable toggle DQS according to the pattern
dci, // DCI disable, both DQ and DQS lines (internal logic and timing sequencer for 0->1 and 1->0)
buf_wr, // phy_buf_wr, // connect to external buffer (but only if not paused)
buf_rd, // phy_buf_rd, // connect to external buffer (but only if not paused)
nop, // add NOP after the current command, keep other data
buf_rst // Reserved for future use
};
end
endfunction
includes/x393_parameters.vh 0 → 100644
View file @ e4816b14
This diff is collapsed.
includes/x393_simulation_parameters.vh 0 → 100644
View file @ e4816b14
/*******************************************************************************
* File: x393_simulation_parameters.vh
* Date:2015-02-07
* Author: Andrey Filippov
* Description: Simulation-specific parameters for the x393
*
* Copyright (c) 2015 Elphel, Inc.
* x393_simulation_parameters.vh is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* x393_simulation_parameters.vh is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
, // to continue previous parameter list
parameter integer AXI_RDADDR_LATENCY= 2, // 2, //2, //2,
parameter integer AXI_WRADDR_LATENCY= 1, // 1, //2, //4,
parameter integer AXI_WRDATA_LATENCY= 2, // 1, //1, //1
parameter integer AXI_TASK_HOLD=1.0,
// parameter [1:0] DEFAULT_STATUS_MODE=3,
parameter SIMUL_AXI_READ_WIDTH=16,
parameter MEMCLK_PERIOD = 5.0,
parameter FCLK0_PERIOD = 41.667, // 10.417, 24MHz
parameter FCLK1_PERIOD = 0.0,
// parameter SENSOR12BITS_LLINE = 192, // 1664;// line duration in clocks
// parameter SENSOR12BITS_NCOLS = 66, //58; //56; // 129; //128; //1288;
// parameter SENSOR12BITS_NROWS = 18, // 16; // 1032;
// parameter SENSOR12BITS_NROWB = 1, // number of "blank rows" from vact to 1-st hact
// parameter SENSOR12BITS_NROWA = 1, // number of "blank rows" from last hact to end of vact
// parameter nAV = 24, //240; // clocks from ARO to VACT (actually from en_dclkd)
// parameter SENSOR12BITS_NBPF = 20, //16; // bpf length
parameter SENSOR12BITS_NGPL = 8, // bpf to hact
parameter SENSOR12BITS_NVLO = 1, // VACT=0 in video mode (clocks)
//parameter tMD = 14; //
//parameter tDDO = 10; // some confusion here - let's assume that it is from DCLK to Data out
parameter SENSOR12BITS_TMD = 4, //
parameter SENSOR12BITS_TDDO = 2, // some confusion here - let's assume that it is from DCLK to Data out
parameter SENSOR12BITS_TDDO1 = 5, //
// parameter SENSOR12BITS_TRIGDLY = 8, // delay between trigger input and start of output (VACT) in lines
// parameter SENSOR12BITS_RAMP = 1, // 1 - ramp, 0 - random (now - sensor.dat)
// parameter SENSOR12BITS_NEW_BAYER = 0, // 0 - "old" tiles (16x16, 1 - new - (18x18)
parameter HISTOGRAM_LEFT = 0, // 2; // left
parameter HISTOGRAM_TOP = 8, // 2, // top
parameter HISTOGRAM_WIDTH = 6, // width
parameter HISTOGRAM_HEIGHT = 6, // height
parameter HISTOGRAM_STRAT_PAGE = 20'h12345,
parameter FRAME_WIDTH_ROUND_BITS = 9, // multiple of 512 pixels (32 16-byte bursts) (11 - ful SDRAM page)
parameter WOI_WIDTH= 64,
parameter QUADRANTS_PXD_HACT_VACT = 6'h01 // 2 bits each: data-0, hact - 1, vact - 2
// 90-degree shifts for data [1:0], hact [3:2] and vact [5:4]
\ No newline at end of file
includes/x393_tasks01.vh 0 → 100644
View file @ e4816b14
/*******************************************************************************
* File: x393_tasks01.vh
* Date:2015-02-07
* Author: Andrey Filippov
* Description: Simulation tasks for the x393 (low level)
*
* Copyright (c) 2015 Elphel, Inc.
* x393_tasks01.vh is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* x393_tasks01.vh is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
// Low-level tasks
// alternative way to check for empty read queue (without a separate counter)
task write_contol_register;
input [29:0] reg_addr;
// input integer reg_addr;
input [31:0] data;
begin
axi_write_single_w(CONTROL_ADDR+reg_addr, data);
end
endtask
task read_contol_register;
input [29:0] reg_addr;
begin
read_and_wait_w(CONTROL_RBACK_ADDR+reg_addr);
end
endtask
task wait_read_queue_empty;
begin
wait (~rvalid && rready && (rid==LAST_ARID)); // nothing left in read queue?
SIMUL_AXI_FULL<=1'b0;
end
endtask
task axi_set_rd_lag;
input [3:0] lag;
begin
@(posedge CLK);
RD_LAG <= lag;
end
endtask
task axi_set_b_lag;
input [3:0] lag;
begin
@(posedge CLK);
B_LAG <= lag;
end
endtask
task read_and_wait_w;
input [29:0] address;
begin
read_and_wait ({address,2'b0});
end
endtask
task read_and_wait;
input [31:0] address;
begin
axi_read_addr(
GLOBAL_READ_ID, // id
address & 32'hfffffffc, // addr
4'h0, // len - single
1 // burst type - increment
);
GLOBAL_READ_ID <= GLOBAL_READ_ID+1;
wait (!CLK && rvalid && rready);
wait (CLK);
registered_rdata <= rdata;
wait (!CLK); // registered_rdata should be valid on exit
end
endtask
task axi_write_single_w; // address in bytes, not words
input [29:0] address;
input [31:0] data;
begin
`ifdef DEBUG_WR_SINGLE
$display("axi_write_single_w %h:%h @ %t",address,data,$time);
`endif
axi_write_single ({address,2'b0},data);
end
endtask
task axi_write_single; // address in bytes, not words
input [31:0] address;
input [31:0] data;
begin
axi_write_addr_data(
GLOBAL_WRITE_ID, // id
// address << 2, // addr
address & 32'hfffffffc, // addr
data,
4'h0, // len - single
1, // burst type - increment
1'b1, // data_en
4'hf, // wstrb
1'b1 // last
);
GLOBAL_WRITE_ID <= GLOBAL_WRITE_ID+1;
#0.1; // without this delay axi_write_addr_data() used old value of GLOBAL_WRITE_ID
end
endtask
task axi_write_addr_data;
input [11:0] id;
input [31:0] addr;
input [31:0] data;
input [ 3:0] len;
input [ 1:0] burst;
input data_en; // if 0 - do not send data, only address
input [ 3:0] wstrb;
input last;
reg data_sent;
// wire data_sent_d;
// assign #(.1) data_sent_d= data_sent;
begin
wait (!CLK && AW_READY);
AWID_IN_r <= id;
AWADDR_IN_r <= addr;
AWLEN_IN_r <= len;
AWSIZE_IN_r <= 3'b010;
AWBURST_IN_r <= burst;
AW_SET_CMD_r <= 1'b1;
if (data_en && W_READY) begin
WID_IN_r <= id;
WDATA_IN_r <= data;
WSTRB_IN_r <= wstrb;
WLAST_IN_r <= last;
W_SET_CMD_r <= 1'b1;
data_sent <= 1'b1;
end else begin
data_sent <= 1'b0;
end
DEBUG1 <=1'b1;
wait (CLK);
DEBUG1 <=1'b0;
AWID_IN_r <= 'hz;
AWADDR_IN_r <= 'hz;
AWLEN_IN_r <= 'hz;
AWSIZE_IN_r <= 'hz;
AWBURST_IN_r <= 'hz;
AW_SET_CMD_r <= 1'b0;
DEBUG2 <=1'b1;
if (data_sent) begin
WID_IN_r <= 'hz;
WDATA_IN_r <= 'hz;
WSTRB_IN_r <= 'hz;
WLAST_IN_r <= 'hz;
W_SET_CMD_r <= 1'b0;
end
// Now sent data if it was not sent simultaneously with the address
if (data_en && !data_sent) begin
DEBUG3 <=1'b1;
wait (!CLK && W_READY);
DEBUG3 <=1'b0;
WID_IN_r <= id;
WDATA_IN_r <= data;
WSTRB_IN_r <= wstrb;
WLAST_IN_r <= last;
W_SET_CMD_r <= 1'b1;
wait (CLK);
DEBUG3 <=1'bx;
WID_IN_r <= 'hz;
WDATA_IN_r <= 'hz;
WSTRB_IN_r <= 'hz;
WLAST_IN_r <= 'hz;
W_SET_CMD_r <= 1'b0;
end
DEBUG2 <=1'b0;
#0.1;
data_sent <= 1'b0;
#0.1;
end
endtask
task axi_write_data;
input [11:0] id;
input [31:0] data;
input [ 3:0] wstrb;
input last;
begin
wait (!CLK && W_READY);
WID_IN_r <= id;
WDATA_IN_r <= data;
WSTRB_IN_r <= wstrb;
WLAST_IN_r <= last;
W_SET_CMD_r <= 1'b1;
wait (CLK);
WID_IN_r <= 12'hz;
WDATA_IN_r <= 'hz;
WSTRB_IN_r <= 4'hz;
WLAST_IN_r <= 1'bz;
W_SET_CMD_r <= 1'b0;
#0.1;
end
endtask
task axi_read_addr;
input [11:0] id;
input [31:0] addr;
input [ 3:0] len;
input [ 1:0] burst;
begin
wait (!CLK && AR_READY);
ARID_IN_r <= id;
ARADDR_IN_r <= addr;
ARLEN_IN_r <= len;
ARSIZE_IN_r <= 3'b010;
ARBURST_IN_r <= burst;
AR_SET_CMD_r <= 1'b1;
wait (CLK);
ARID_IN_r <= 12'hz;
ARADDR_IN_r <= 'hz;
ARLEN_IN_r <= 4'hz;
ARSIZE_IN_r <= 3'hz;
ARBURST_IN_r <= 2'hz;
AR_SET_CMD_r <= 1'b0;
LAST_ARID <= id;
NUM_WORDS_EXPECTED <= NUM_WORDS_EXPECTED+len+1;
end
endtask
includes/x393_tasks_afi.vh 0 → 100644
View file @ e4816b14
/*******************************************************************************
* File: x393_tasks_afi.vh
* Date:2015-02-07
* Author: Andrey Filippov
* Description: Simulation tasks for the AXI_HP (AFI)
*
* Copyright (c) 2015 Elphel, Inc.
* x393_tasks_afi.vh is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* x393_tasks_afi.vh is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
task membridge_setup;
input [28:0] len64; // number of 64-bit words to transfer
input [28:0] width64; // frame width in 64-bit words
input [28:0] start64; // relative start address of the transfer (set to 0 when writing lo_addr64)
input [28:0] lo_addr64; // low address of the system memory range, in 64-bit words
input [28:0] size64; // size of the system memory range in 64-bit words
begin
write_contol_register(MEMBRIDGE_ADDR + MEMBRIDGE_LO_ADDR64, {3'b0,lo_addr64});
write_contol_register(MEMBRIDGE_ADDR + MEMBRIDGE_SIZE64, {3'b0,size64});
write_contol_register(MEMBRIDGE_ADDR + MEMBRIDGE_START64, {3'b0,start64});
write_contol_register(MEMBRIDGE_ADDR + MEMBRIDGE_LEN64, {3'b0,len64});
write_contol_register(MEMBRIDGE_ADDR + MEMBRIDGE_WIDTH64, {3'b0,width64});
end
endtask
task membridge_start;
input continue; // 0 start from start64, 1 - continue from where it was
begin
write_contol_register(MEMBRIDGE_ADDR + MEMBRIDGE_CTRL, {29'b0,continue,2'b11});
end
endtask
task membridge_en; // SuppressThisWarning VEditor - may be unused
input en; // not needed to start, pauses axi if set to 0 whil running, resets "done" status bit
begin
write_contol_register(MEMBRIDGE_ADDR + MEMBRIDGE_CTRL, {31'b0,en});
end
endtask
task afi_setup;
input [1:0] port_num;
begin
afi_write_reg(port_num, 'h0, 0); // AFI_RDCHAN_CTRL
afi_write_reg(port_num, 'h4, 7); // AFI_RDCHAN_ISSUINGCAP
afi_write_reg(port_num, 'h8, 0); // AFI_RDQOS
//afi_write_reg(port_num, 'hc, 0); // AFI_RDDATAFIFO_LEVEL
//afi_write_reg(port_num, 'h10, 0); // AFI_RDDEBUG
afi_write_reg(port_num, 'h14, 'hf00); // AFI_WRCHAN_CTRL
afi_write_reg(port_num, 'h18, 7); // AFI_WRCHAN_ISSUINGCAP
afi_write_reg(port_num, 'h1c, 0); // AFI_WRQOS
//afi_write_reg(port_num, 'h20, 0); // AFI_WRDATAFIFO_LEVEL
//afi_write_reg(port_num, 'h24, 0); // AFI_WRDEBUG
end
endtask
task afi_write_reg;
input [1:0] port_num;
input integer rel_baddr; // relative byte address
input [31:0] data;
begin
ps_write_reg(32'hf8008000+ (port_num << 12) + (rel_baddr & 'hfffffffc), data);
end
endtask
task afi_read_reg; // SuppressThisWarning VEditor - may be unused
input [1:0] port_num;
input integer rel_baddr; // relative byte address
input verbose;
begin
ps_read_reg(32'hf8008000+ (port_num << 12) + (rel_baddr & 'hfffffffc), verbose);
end
endtask
task ps_write_reg;
input [31:0] ps_reg_addr;
input [31:0] ps_reg_data;
begin
@(posedge HCLK);
PS_REG_ADDR <= ps_reg_addr;
PS_REG_DIN <= ps_reg_data;
PS_REG_WR <= 1'b1;
@(posedge HCLK);
PS_REG_ADDR <= 'bx;
PS_REG_DIN <= 'bx;
PS_REG_WR <= 1'b0;
end
endtask
task ps_read_reg;
input [31:0] ps_reg_addr;
input verbose;
begin
@(posedge HCLK);
PS_REG_ADDR <= ps_reg_addr;
PS_REG_RD <= 1'b1;
@(posedge HCLK);
PS_REG_ADDR <= 'bx;
PS_REG_DIN <= 'bx;
PS_REG_WR <= 1'b0;
@(negedge HCLK);
if (verbose) begin
$display("ps_read_reg(%x) -> %x @%t",ps_reg_addr,PS_RDATA,$time);
end
end
endtask
\ No newline at end of file
includes/x393_tasks_mcntrl_buffers.vh 0 → 100644
View file @ e4816b14
/*******************************************************************************
* File: x393_tasks_mcntrl_buffers.vh
* Date:2015-02-07
* Author: Andrey Filippov
* Description: Simulation tasks for software reading/writing (with test patterns)
* of the block buffers.
*
* Copyright (c) 2015 Elphel, Inc.
* x393_tasks_mcntrl_buffers.vh is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* x393_tasks_mcntrl_buffers.vh is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
/*
task write_block_scanline_chn; // S uppressThisWarning VEditor : may be unused
input integer chn; // buffer channel
input [1:0] page;
// input integer num_words; // number of words to write (will be rounded up to multiple of 16)
input [NUM_XFER_BITS:0] num_bursts; // number of 8-bursts to write (will be rounded up to multiple of 16)
input integer startX;
input integer startY;
reg [29:0] start_addr;
begin
$display("====== write_block_scanline_chn:%d page: %x X=0x%x Y=0x%x num=%d @%t", chn, page, startX, startY,num_words, $time);
case (chn)
1: start_addr=MCONTR_BUF0_WR_ADDR + (page << 8);
3: start_addr=MCONTR_BUF3_WR_ADDR + (page << 8);
default: begin
$display("**** ERROR: Invalid channel for write_block_scanline_chn = %d @%t", chn, $time);
start_addr = MCONTR_BUF0_WR_ADDR+ (page << 8);
end
endcase
// write_block_incremtal (start_addr, num_words, (startX<<2) + (startY<<16)); // 1 of startX is 8x16 bit, 16 bytes or 4 32-bit words
write_block_incremtal (start_addr, num_bursts << 2, (startX<<2) + (startY<<16)); // 1 of startX is 8x16 bit, 16 bytes or 4 32-bit words
end
endtask
*/
task write_block_incremtal;
input [29:0] start_word_address;
input integer num_words; // number of words to write (will be rounded up to multiple of 16)
input integer start_value;
integer i, j;
begin
$display("**** write_block_buf @%t", $time);
for (i = 0; i < num_words; i = i + 16) begin
axi_write_addr_data(
i, // id
{start_word_address,2'b0}+( i << 2),
start_value+i,
4'hf, // len
1, // burst type - increment
1'b1, // data_en
4'hf, // wstrb
1'b0 // last
);
// $display("+Write block data (addr:data): 0x%x:0x%08x @%t", i, i | (((i + 7) & 'hff) << 8) | (((i + 23) & 'hff) << 16) | (((i + 31) & 'hff) << 24), $time);
$display("+Write block incremental (addr:data): 0x%x:0x%08x @%t", i, start_value+i, $time);
for (j = 1; j < 16; j = j + 1) begin
axi_write_data(
i, // id
start_value+i+j,
4'hf, // wstrb
(j == 15) ? 1'b1 : 1'b0 // last
);
$display(" Write block incremental (addr:data): 0x%08x:0x%x @%t", (i + j), start_value+i+j, $time);
end
end
end
endtask
task write_block_buf_chn; // S uppressThisWarning VEditor : may be unused
input integer chn; // buffer channel
input [1:0] page;
input integer num_words; // number of words to write (will be rounded up to multiple of 16)
reg [29:0] start_addr;
begin
case (chn)
0: start_addr=MCONTR_BUF0_WR_ADDR + (page << 8);
// 1: start_addr=MCONTR_BUF1_WR_ADDR + (page << 8);
2: start_addr=MCONTR_BUF2_WR_ADDR + (page << 8);
3: start_addr=MCONTR_BUF3_WR_ADDR + (page << 8);
4: start_addr=MCONTR_BUF4_WR_ADDR + (page << 8);
default: begin
$display("**** ERROR: Invalid channel (not 0,2,3,4) for write buffer = %d @%t", chn, $time);
start_addr = MCONTR_BUF0_WR_ADDR+ (page << 8);
end
endcase
write_block_buf (start_addr, num_words);
end
endtask
task write_block_buf;
input [29:0] start_word_address;
input integer num_words; // number of words to write (will be rounded up to multiple of 16)
integer i, j;
begin
$display("**** write_block_buf @%t", $time);
for (i = 0; i < num_words; i = i + 16) begin
axi_write_addr_data(
i, // id
{start_word_address,2'b0}+( i << 2),
// (MCONTR_BUF0_WR_ADDR + (page <<8)+ i) << 2, // addr
i | (((i + 7) & 'hff) << 8) | (((i + 23) & 'hff) << 16) | (((i + 31) & 'hff) << 24),
4'hf, // len
1, // burst type - increment
1'b1, // data_en
4'hf, // wstrb
1'b0 // last
);
$display("+Write block data (addr:data): 0x%x:0x%08x @%t", i, i | (((i + 7) & 'hff) << 8) | (((i + 23) & 'hff) << 16) | (((i + 31) & 'hff) << 24), $time);
for (j = 1; j < 16; j = j + 1) begin
axi_write_data(
i, // id
(i + j) | ((((i + j) + 7) & 'hff) << 8) | ((((i + j) + 23) & 'hff) << 16) | ((((i + j) + 31) & 'hff) << 24),
4'hf, // wstrb
(j == 15) ? 1'b1 : 1'b0 // last
);
$display(" Write block data (addr:data): 0x%08x:0x%x @%t", (i + j),
(i + j) | ((((i + j) + 7) & 'hff) << 8) | ((((i + j) + 23) & 'hff) << 16) | ((((i + j) + 31) & 'hff) << 24), $time);
end
end
end
endtask
// read memory
task read_block_buf_chn; // S uppressThisWarning VEditor : may be unused
// input integer chn; // buffer channel
input [3:0] chn; // buffer channel
input [1:0] page;
input integer num_read; // number of words to read (will be rounded up to multiple of 16)
input wait_done;
reg [29:0] start_addr;
begin
case (chn)
0: start_addr=MCONTR_BUF0_RD_ADDR + (page << 8);
2: start_addr=MCONTR_BUF2_RD_ADDR + (page << 8);
3: start_addr=MCONTR_BUF3_RD_ADDR + (page << 8);
4: start_addr=MCONTR_BUF4_RD_ADDR + (page << 8);
default: begin
$display("**** ERROR: Invalid channel (not 0,2,3,4) for read buffer = %d @%t", chn, $time);
start_addr = 30'b0+ (page << 8);
end
endcase
read_block_buf (start_addr, num_read, wait_done);
end
endtask
task read_block_buf;
input [29:0] start_word_address;
input integer num_read; // number of words to read (will be rounded up to multiple of 16)
input wait_done;
integer i; //,j;
begin
wait (~rstb);
SIMUL_AXI_FULL<=1'b0;
$display("**** read_block_buf @%t", $time);
axi_set_rd_lag(0);
for (i = 0; i < num_read; i = i + 16) begin
wait(arready);
// $display ("read_block_buf (0x%x) @%t",i,$time);
axi_read_addr(
i, // id
{start_word_address,2'b0}+( i << 2), // addr
4'hf, // len
1 // burst type - increment
);
end
if (wait_done) begin
// wait (AXI_RD_EMPTY);
wait_read_queue_empty;
end
end
endtask
includes/x393_tasks_mcntrl_en_dis_priority.vh 0 → 100644
View file @ e4816b14
/*******************************************************************************
* File: x393_tasks_mcntrl_en_dis_priority.vh
* Date:2015-02-07
* Author: Andrey Filippov
* Description: Simulation tasks for software reading/writing (with test patterns)
* of the block buffers.
*
* Copyright (c) 2015 Elphel, Inc.
* x393_tasks_mcntrl_en_dis_priority.vh is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* x393_tasks_mcntrl_en_dis_priority.vh is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
task enable_cmda;
input en;
begin
write_contol_register(MCONTR_PHY_0BIT_ADDR + MCONTR_PHY_0BIT_CMDA_EN + en, 0);
end
endtask
task enable_cke;
input en;
begin
write_contol_register(MCONTR_PHY_0BIT_ADDR + MCONTR_PHY_0BIT_CKE_EN + en, 0);
end
endtask
task activate_sdrst;
input en;
begin
write_contol_register(MCONTR_PHY_0BIT_ADDR + MCONTR_PHY_0BIT_SDRST_ACT + en, 0);
end
endtask
task enable_refresh;
input en;
begin
write_contol_register(MCONTR_TOP_0BIT_ADDR + MCONTR_TOP_0BIT_REFRESH_EN + en, 0);
end
endtask
task enable_memcntrl;
input en;
begin
write_contol_register(MCONTR_TOP_0BIT_ADDR + MCONTR_TOP_0BIT_MCONTR_EN + en, 0);
end
endtask
task enable_memcntrl_channels;
input [15:0] chnen; // bit-per-channel, 1 - enable;
begin
ENABLED_CHANNELS = chnen; // currently enabled memory channels
write_contol_register(MCONTR_TOP_16BIT_ADDR + MCONTR_TOP_16BIT_CHN_EN, {16'b0,chnen});
end
endtask
task enable_memcntrl_en_dis;
input [3:0] chn;
input en;
begin
if (en) begin
ENABLED_CHANNELS = ENABLED_CHANNELS | (1<<chn);
end else begin
ENABLED_CHANNELS = ENABLED_CHANNELS & ~(1<<chn);
end
write_contol_register(MCONTR_TOP_16BIT_ADDR + MCONTR_TOP_16BIT_CHN_EN, {16'b0,ENABLED_CHANNELS});
end
endtask
task configure_channel_priority;
input [ 3:0] chn;
input [15:0] priority; // (higher is more important)
begin
write_contol_register(MCONTR_ARBIT_ADDR + chn, {16'b0,priority});
end
endtask
includes/x393_tasks_mcntrl_timing.vh 0 → 100644
View file @ e4816b14
/*******************************************************************************
* File: x393_tasks_mcntrl_timing.vh
* Date:2015-02-07
* Author: Andrey Filippov
* Description: Simulation tasks for programming I/O delays and other timing
* parameters in the memory controller
*
* Copyright (c) 2015 Elphel, Inc.
* x393_tasks_mcntrl_timing.vh is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* x393_tasks_mcntrl_timing.vh is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
task axi_set_same_delays; //SuppressThisWarning VEditor : may be unused
input [7:0] dq_idelay;
input [7:0] dq_odelay;
input [7:0] dqs_idelay;
input [7:0] dqs_odelay;
input [7:0] dm_odelay;
input [7:0] cmda_odelay;
begin
$display("SET DELAYS(0x%x,0x%x,0x%x,0x%x,0x%x,0x%x) @ %t",
dq_idelay,dq_odelay,dqs_idelay,dqs_odelay,dm_odelay,cmda_odelay,$time);
axi_set_dq_idelay(dq_idelay);
axi_set_dq_odelay(dq_odelay);
axi_set_dqs_idelay(dqs_idelay);
axi_set_dqs_odelay(dqs_odelay);
axi_set_dm_odelay(dm_odelay);
axi_set_cmda_odelay(cmda_odelay);
end
endtask
task axi_set_dqs_odelay_nominal; //SuppressThisWarning VEditor : may be unused
begin
$display("axi_set_dqs_odelay_nominal(0x%x,0x%x) @ %t",
(DLY_LANE0_ODELAY >> (8<<3)) & 32'hff,
(DLY_LANE1_ODELAY >> (8<<3)) & 32'hff,
$time);
// axi_set_dqs_idelay(
write_contol_register(LD_DLY_LANE0_ODELAY + 8, (DLY_LANE0_ODELAY >> (8<<3)) & 32'hff);
write_contol_register(LD_DLY_LANE1_ODELAY + 8, (DLY_LANE1_ODELAY >> (8<<3)) & 32'hff);
write_contol_register(DLY_SET,0);
end
endtask
task axi_set_dqs_idelay_nominal; //SuppressThisWarning VEditor : may be unused
begin
// axi_set_dqs_idelay(
write_contol_register(LD_DLY_LANE0_IDELAY + 8, (DLY_LANE0_IDELAY >> (8<<3)) & 32'hff);
write_contol_register(LD_DLY_LANE1_IDELAY + 8, (DLY_LANE1_IDELAY >> (8<<3)) & 32'hff);
write_contol_register(DLY_SET,0);
end
endtask
task axi_set_dqs_idelay_wlv; //SuppressThisWarning VEditor : may be unused
begin
write_contol_register(LD_DLY_LANE0_IDELAY + 8, DLY_LANE0_DQS_WLV_IDELAY);
write_contol_register(LD_DLY_LANE1_IDELAY + 8, DLY_LANE1_DQS_WLV_IDELAY);
write_contol_register(DLY_SET,0);
end
endtask
task axi_set_delays; // set all individual delays
integer i;
begin
$display("axi_set_delays @ %t",$time);
for (i=0;i<10;i=i+1) begin
write_contol_register(LD_DLY_LANE0_ODELAY + i, (DLY_LANE0_ODELAY >> (i<<3)) & 32'hff);
end
for (i=0;i<9;i=i+1) begin
write_contol_register(LD_DLY_LANE0_IDELAY + i, (DLY_LANE0_IDELAY >> (i<<3)) & 32'hff);
end
for (i=0;i<10;i=i+1) begin
write_contol_register(LD_DLY_LANE1_ODELAY + i, (DLY_LANE1_ODELAY >> (i<<3)) & 32'hff);
end
for (i=0;i<9;i=i+1) begin
write_contol_register(LD_DLY_LANE1_IDELAY + i, (DLY_LANE1_IDELAY >> (i<<3)) & 32'hff);
end
for (i=0;i<32;i=i+1) begin
write_contol_register(LD_DLY_CMDA + i, (DLY_CMDA >> (i<<3)) & 32'hff);
end
// write_contol_register(DLY_SET,0);
axi_set_phase(DLY_PHASE); // also sets all delays
end
endtask
task axi_get_delays; // set all individual delays
integer i;
begin
$display("axi_get_delays @ %t",$time);
for (i=0;i<10;i=i+1) begin
read_contol_register(LD_DLY_LANE0_ODELAY + i);
end
for (i=0;i<9;i=i+1) begin
read_contol_register(LD_DLY_LANE0_IDELAY + i);
end
for (i=0;i<10;i=i+1) begin
read_contol_register(LD_DLY_LANE1_ODELAY + i);
end
for (i=0;i<9;i=i+1) begin
read_contol_register(LD_DLY_LANE1_IDELAY + i);
end
for (i=0;i<32;i=i+1) begin
read_contol_register(LD_DLY_CMDA + i);
end
read_contol_register(LD_DLY_PHASE);
end
endtask
task axi_set_dq_idelay; // sets same delay to all dq idelay
input [7:0] delay;
begin
$display("SET DQ IDELAY=0x%x @ %t",delay,$time);
axi_set_multiple_delays(LD_DLY_LANE0_IDELAY, 8, delay);
axi_set_multiple_delays(LD_DLY_LANE1_IDELAY, 8, delay);
write_contol_register(DLY_SET,0); // set all delays
end
endtask
task axi_set_dq_odelay;
input [7:0] delay;
begin
$display("SET DQ ODELAY=0x%x @ %t",delay,$time);
axi_set_multiple_delays(LD_DLY_LANE0_ODELAY, 8, delay);
axi_set_multiple_delays(LD_DLY_LANE1_ODELAY, 8, delay);
write_contol_register(DLY_SET,0); // set all delays
end
endtask
task axi_set_dqs_idelay;
input [7:0] delay;
begin
$display("SET DQS IDELAY=0x%x @ %t",delay,$time);
axi_set_multiple_delays(LD_DLY_LANE0_IDELAY + 8, 1, delay);
axi_set_multiple_delays(LD_DLY_LANE1_IDELAY + 8, 1, delay);
write_contol_register(DLY_SET,0); // set all delays
end
endtask
task axi_set_dqs_odelay;
input [7:0] delay;
begin
$display("SET DQS ODELAY=0x%x @ %t",delay,$time);
axi_set_multiple_delays(LD_DLY_LANE0_ODELAY + 8, 1, delay);
axi_set_multiple_delays(LD_DLY_LANE1_ODELAY + 8, 1, delay);
write_contol_register(DLY_SET,0); // set all delays
end
endtask
task axi_set_dm_odelay;
input [7:0] delay;
begin
$display("SET DQM IDELAY=0x%x @ %t",delay,$time);
axi_set_multiple_delays(LD_DLY_LANE0_ODELAY + 9, 1, delay);
axi_set_multiple_delays(LD_DLY_LANE1_ODELAY + 9, 1, delay);
write_contol_register(DLY_SET,0); // set all delays
end
endtask
task axi_set_cmda_odelay;
input [7:0] delay;
begin
$display("SET COMMAND and ADDRESS ODELAY=0x%x @ %t",delay,$time);
axi_set_multiple_delays(LD_DLY_CMDA, 32, delay);
write_contol_register(DLY_SET,0); // set all delays
end
endtask
task axi_set_multiple_delays;
input [29:0] reg_addr;
input integer number;
input [7:0] delay;
integer i;
begin
for (i=0;i<number;i=i+1) begin
write_contol_register(reg_addr + i, {24'b0,delay}); // control regiter address
end
end
endtask
task axi_set_phase;
input [PHASE_WIDTH-1:0] phase;
begin
$display("SET CLOCK PHASE to 0x%x @ %t",phase,$time);
write_contol_register(LD_DLY_PHASE, {{(32-PHASE_WIDTH){1'b0}},phase}); // control regiter address
write_contol_register(DLY_SET,0);
target_phase <= phase;
end
endtask
task axi_set_wbuf_delay;
input [3:0] delay;
begin
$display("SET WBUF DELAY to 0x%x @ %t",delay,$time);
write_contol_register(MCONTR_PHY_16BIT_ADDR+MCONTR_PHY_16BIT_WBUF_DELAY, {28'h0, delay});
end
endtask
// set dq /dqs tristate on/off patterns
task axi_set_tristate_patterns;
begin
$display("SET TRISTATE PATTERNS @ %t",$time);
write_contol_register(MCONTR_PHY_16BIT_ADDR +MCONTR_PHY_16BIT_PATTERNS_TRI,
{16'h0, DQSTRI_LAST, DQSTRI_FIRST, DQTRI_LAST, DQTRI_FIRST});
end
endtask
task axi_set_dqs_dqm_patterns;
begin
$display("SET DQS+DQM PATTERNS @ %t",$time);
// set patterns for DM (always 0) and DQS - always the same (may try different for write lev.)
write_contol_register(MCONTR_PHY_16BIT_ADDR + MCONTR_PHY_16BIT_PATTERNS,
32'h0055);
end
endtask
includes/x393_tasks_pio_sequences.vh 0 → 100644
View file @ e4816b14
This diff is collapsed.
includes/x393_tasks_ps_pio.vh 0 → 100644
View file @ e4816b14
/*******************************************************************************
* File: x393_tasks_ps_pio.vh
* Date:2015-02-07
* Author: Andrey Filippov
* Description: Simulation tasks for mcntrl_ps_pio module (launching software
* - programmed memory transaction sequences)
*
* Copyright (c) 2015 Elphel, Inc.
* x393_tasks_ps_pio.vh is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* x393_tasks_ps_pio.vh is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
task schedule_ps_pio; // schedule software-control memory operation (may need to check FIFO status first)
input [9:0] seq_addr; // sequence start address
input [1:0] page; // buffer page number
input urgent; // high priority request (only for competion wityh other channels, wiil not pass in this FIFO)
input chn; // channel buffer to use: 0 - memory read, 1 - memory write
input wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
begin
// wait_ps_pio_ready(DEFAULT_STATUS_MODE); // wait FIFO not half full
write_contol_register(MCNTRL_PS_ADDR + MCNTRL_PS_CMD, {17'b0,wait_complete,chn,urgent,page,seq_addr});
end
endtask
task wait_ps_pio_ready; // wait PS PIO module can accept comamnds (fifo half empty)
input [1:0] mode;
input sync_seq; // synchronize sequences
begin
wait_status_condition (
MCNTRL_PS_STATUS_REG_ADDR,
MCNTRL_PS_ADDR+MCNTRL_PS_STATUS_CNTRL,
mode,
0,
2 << STATUS_2LSB_SHFT,
0,
sync_seq);
end
endtask
task wait_ps_pio_done; // wait PS PIO module has no pending/running memory transaction
input [1:0] mode;
input sync_seq; // synchronize sequences
begin
wait_status_condition (
MCNTRL_PS_STATUS_REG_ADDR,
MCNTRL_PS_ADDR+MCNTRL_PS_STATUS_CNTRL,
mode,
0,
3 << STATUS_2LSB_SHFT,
0,
sync_seq);
end
endtask
includes/x393_tasks_status.vh 0 → 100644
View file @ e4816b14
/*******************************************************************************
* File: x393_status.vh
* Date:2015-02-07
* Author: Andrey Filippov
* Description: Simulation tasks for the x393 related to status
*
* Copyright (c) 2015 Elphel, Inc.
* x393_status.vh is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* x393_status.vh is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
// CVC bug that is supposed to be already fixed
`ifdef CVC
task wait_status_condition;
input [STATUS_DEPTH-1:0] status_address;
input [29:0] status_control_address;
input [1:0] status_mode;
input [25:0] pattern; // bits as in read registers
input [25:0] mask; // which bits to compare
input invert_match; // 0 - wait until match to pattern (all bits), 1 - wait until no match (any of bits differ)
input wait_seq;
reg match;
reg [5:0] seq_num;
reg [31:0] pattern1;
reg [31:0] mask1;
begin
WAITING_STATUS = 1;
pattern1 = {6'h0,pattern};
mask1 = {6'h0,mask};
for (match=0; !match; match = invert_match ^ (((registered_rdata ^ pattern1) & mask1)==0)) begin
read_status(status_address);
if (wait_seq) begin
seq_num = (registered_rdata[STATUS_SEQ_SHFT+:6] ^ 6'h20)&'h30;
write_contol_register(status_control_address, {24'b0,status_mode,seq_num});
read_status(status_address);
while (((registered_rdata[STATUS_SEQ_SHFT+:6] ^ seq_num) & 6'h30)!=0) begin // match just 2 MSBs
read_status(status_address);
end
end
pattern1 = {6'h0,pattern};
mask1 = {6'h0,mask};
end
WAITING_STATUS = 0;
end
endtask
`else
task wait_status_condition;
input [STATUS_DEPTH-1:0] status_address;
input [29:0] status_control_address;
input [1:0] status_mode;
input [25:0] pattern; // bits as in read registers
input [25:0] mask; // which bits to compare
input invert_match; // 0 - wait until match to pattern (all bits), 1 - wait until no match (any of bits differ)
input wait_seq;
reg match;
reg [5:0] seq_num;
begin
WAITING_STATUS = 1;
for (match=0; !match; match = invert_match ^ (((registered_rdata ^ {6'h0,pattern}) & {6'h0,mask})==0)) begin
read_status(status_address);
if (wait_seq) begin
seq_num = (registered_rdata[STATUS_SEQ_SHFT+:6] ^ 6'h20)&'h30;
write_contol_register(status_control_address, {24'b0,status_mode,seq_num});
read_status(status_address);
while (((registered_rdata[STATUS_SEQ_SHFT+:6] ^ seq_num) & 6'h30)!=0) begin // match just 2 MSBs
read_status(status_address);
end
end
end
WAITING_STATUS = 0;
end
endtask
`endif
/*
task wait_status_condition_auto; // assumes status is already updating
input [STATUS_DEPTH-1:0] status_address;
input [29:0] status_control_address;
input [1:0] status_mode;
input [25:0] pattern; // bits as in read registers
input [25:0] mask; // which bits to compare
input invert_match; // 0 - wait until match to pattern (all bits), 1 - wait until no match (any of bits differ)
reg match;
begin
WAITING_STATUS = 1;
for (match=0; !match; match = invert_match ^ (((registered_rdata ^ {6'h0,pattern}) & {6'h0,mask})==0)) begin
read_status(status_address);
end
WAITING_STATUS = 0;
end
endtask
*/
task wait_phase_shifter_ready;
begin
WAITING_STATUS = 1;
read_status(MCONTR_PHY_STATUS_REG_ADDR);
while (((registered_rdata & STATUS_PSHIFTER_RDY_MASK) == 0) || (((registered_rdata ^ {24'h0,target_phase}) & 'hff) != 0)) begin
read_status(MCONTR_PHY_STATUS_REG_ADDR); // exits after negedge CLK
end
WAITING_STATUS = 0;
end
endtask
task read_all_status;
begin
$display (" read_all_status @%t",$time);
read_status (MCONTR_PHY_STATUS_REG_ADDR);
read_status (MCONTR_TOP_STATUS_REG_ADDR);
read_status (MCNTRL_PS_STATUS_REG_ADDR);
read_status (MCNTRL_SCANLINE_STATUS_REG_CHN1_ADDR);
read_status (MCNTRL_SCANLINE_STATUS_REG_CHN3_ADDR);
read_status (MCNTRL_TILED_STATUS_REG_CHN2_ADDR);
read_status (MCNTRL_TILED_STATUS_REG_CHN4_ADDR);
// read_status (MCNTRL_TEST01_STATUS_REG_CHN1_ADDR);
read_status (MCNTRL_TEST01_STATUS_REG_CHN2_ADDR);
read_status (MCNTRL_TEST01_STATUS_REG_CHN3_ADDR);
read_status (MCNTRL_TEST01_STATUS_REG_CHN4_ADDR);
read_status (MEMBRIDGE_STATUS_REG);
end
endtask
task read_status;
input [STATUS_DEPTH-1:0] address;
begin
read_and_wait_w(STATUS_ADDR + address ); // Will set: registered_rdata <= rdata;
end
endtask
task program_status_all;
input [1:0] mode;
input [5:0] seq_num;
begin
program_status (MCONTR_PHY_16BIT_ADDR, MCONTR_PHY_STATUS_CNTRL, mode,seq_num); //MCONTR_PHY_STATUS_REG_ADDR= 'h0,
program_status (MCONTR_TOP_16BIT_ADDR, MCONTR_TOP_16BIT_STATUS_CNTRL, mode,seq_num); //MCONTR_TOP_STATUS_REG_ADDR= 'h1,
program_status (MCNTRL_PS_ADDR, MCNTRL_PS_STATUS_CNTRL, mode,seq_num); //MCNTRL_PS_STATUS_REG_ADDR= 'h2,
program_status (MCNTRL_SCANLINE_CHN1_ADDR, MCNTRL_SCANLINE_STATUS_CNTRL, mode,seq_num); //MCNTRL_SCANLINE_STATUS_REG_CHN2_ADDR='h4,
program_status (MCNTRL_SCANLINE_CHN3_ADDR, MCNTRL_SCANLINE_STATUS_CNTRL, mode,seq_num); //MCNTRL_SCANLINE_STATUS_REG_CHN3_ADDR='h5,
program_status (MCNTRL_TILED_CHN2_ADDR, MCNTRL_TILED_STATUS_CNTRL, mode,seq_num); //MCNTRL_TILED_STATUS_REG_CHN4_ADDR= 'h6,
program_status (MCNTRL_TILED_CHN4_ADDR, MCNTRL_TILED_STATUS_CNTRL, mode,seq_num); //MCNTRL_TILED_STATUS_REG_CHN4_ADDR= 'h6,
// program_status (MCNTRL_TEST01_ADDR, MCNTRL_TEST01_CHN1_STATUS_CNTRL,mode,seq_num); //MCNTRL_TEST01_STATUS_REG_CHN2_ADDR= 'h3c,
program_status (MCNTRL_TEST01_ADDR, MCNTRL_TEST01_CHN2_STATUS_CNTRL,mode,seq_num); //MCNTRL_TEST01_STATUS_REG_CHN2_ADDR= 'h3c,
program_status (MCNTRL_TEST01_ADDR, MCNTRL_TEST01_CHN3_STATUS_CNTRL,mode,seq_num); //MCNTRL_TEST01_STATUS_REG_CHN3_ADDR= 'h3d,
program_status (MCNTRL_TEST01_ADDR, MCNTRL_TEST01_CHN4_STATUS_CNTRL,mode,seq_num); //MCNTRL_TEST01_STATUS_REG_CHN4_ADDR= 'h3e,
program_status (MEMBRIDGE_ADDR , MEMBRIDGE_STATUS_CNTRL, mode,seq_num); //MCNTRL_TEST01_STATUS_REG_CHN4_ADDR= 'h3e,
end
endtask
task program_status;
input [29:0] base_addr;
input [7:0] reg_addr;
input [1:0] mode;
// mode bits:
// 0 disable status generation,
// 1 single status request,
// 2 - auto status, keep specified seq number,
// 3 - auto, inc sequence number
input [5:0] seq_number;
begin
// axi_write_single_w(CONTROL_ADDR+base_addr+reg_addr, {24'b0,mode,seq_number});
write_contol_register(base_addr + reg_addr, {24'b0,mode,seq_number});
end
endtask
system_defines.vh 0 → 100644
View file @ e4816b14
// This file may be used to define same pre-processor macros to be included into each parsed file
`ifndef SYSTEM_DEFINES
`define SYSTEM_DEFINES
`define PRELOAD_BRAMS
// Enviroment-dependent options
`ifdef IVERILOG
`define SIMULATION
`define OPEN_SOURCE_ONLY
`else
`ifdef CVC
`define SIMULATION
`define OPEN_SOURCE_ONLY
`endif // CVC
`endif // IVERILOG
// will not use simultaneous reset in shift registers, just and input data with ~rst
`define SHREG_SEQUENTIAL_RESET 1
// synthesis does to recognize global clock as G input of the primitive latch
`undef INFER_LATCHES
// define when using CDC - it does not support them
`undef IGNORE_ATTR
//`define MEMBRIDGE_DEBUG_READ 1
`define use200Mhz 1
`define USE_CMD_ENCOD_TILED_32_RD 1
// It can be used to check different `ifdef branches
//`define XIL_TIMING //Simprim
`define den4096Mb 1
// `define IVERILOG
// defines for memory channels
// chn 0 is read from memory and write to memory
`define def_enable_mem_chn0
`define def_read_mem_chn0
`define def_write_mem_chn0
`undef def_scanline_chn0
`undef def_tiled_chn0
// chn 1 is scanline r+w
`define def_enable_mem_chn1
`define def_read_mem_chn1
`define def_write_mem_chn1
`define def_scanline_chn1
`undef def_tiled_chn1
// chn 2 is tiled r+w
`define def_enable_mem_chn2
`define def_read_mem_chn2
`define def_write_mem_chn2
`undef def_scanline_chn2
`define def_tiled_chn2
// chn 3 is scanline r+w (reuse later)
`define def_enable_mem_chn3
`define def_read_mem_chn3
`define def_write_mem_chn3
`define def_scanline_chn3
`undef def_tiled_chn3
// chn 4 is tiled r+w (reuse later)
`define def_enable_mem_chn4
`define def_read_mem_chn4
`define def_write_mem_chn4
`undef def_scanline_chn4
`define def_tiled_chn4
// chn 5 is disabled
`undef def_enable_mem_chn5
// chn 6 is disabled
`undef def_enable_mem_chn6
// chn 7 is disabled
`undef def_enable_mem_chn7
// chn 8 is scanline w (sensor channel 0)
`define def_enable_mem_chn8
`undef def_read_mem_chn8
`define def_write_mem_chn8
`define def_scanline_chn8
`undef def_tiled_chn8
// chn 9 is scanline w (sensor channel 1)
`define def_enable_mem_chn9
`undef def_read_mem_chn9
`define def_write_mem_chn9
`define def_scanline_chn9
`undef def_tiled_chn9
// chn 10 is scanline w (sensor channel 2)
`define def_enable_mem_chn10
`undef def_read_mem_chn10
`define def_write_mem_chn10
`define def_scanline_chn10
`undef def_tiled_chn10
// chn 11 is scanline w (sensor channel 3)
`define def_enable_mem_chn11
`undef def_read_mem_chn11
`define def_write_mem_chn11
`define def_scanline_chn11
`undef def_tiled_chn11
// chn 12 is tiled read (compressor channel 0)
`define def_enable_mem_chn12
`define def_read_mem_chn12
`undef def_write_mem_chn12
`undef def_scanline_chn12
`define def_tiled_chn12
// chn 12 is tiled read (compressor channel 1)
`define def_enable_mem_chn13
`define def_read_mem_chn13
`undef def_write_mem_chn13
`undef def_scanline_chn13
`define def_tiled_chn13
// chn 12 is tiled read (compressor channel 2)
`define def_enable_mem_chn14
`define def_read_mem_chn14
`undef def_write_mem_chn14
`undef def_scanline_chn14
`define def_tiled_chn14
// chn 12 is tiled read (compressor channel 3)
`define def_enable_mem_chn15
`define def_read_mem_chn15
`undef def_write_mem_chn15
`undef def_scanline_chn15
`define def_tiled_chn15
`endif
\ No newline at end of file
wrapper/GTXE2_GPL.v
View file @ e4816b14
......@@ -88,7 +88,7 @@ module gtxe2_chnl_cpll(
input wire [4:0] PMARSVDIN,
input wire [4:0] PMARSVDIN2,
input wire [19:0] TSTIN,
output wire TSTOUT,
output wire [9:0] TSTOUT,
// internal
input wire ref_clk,
......@@ -287,7 +287,7 @@ module gtxe2_chnl_clocking(
output wire rx_sipo_clk,
// additional ports to cpll
output TSTOUT,
output [9:0] TSTOUT,
input [15:0] GTRSVD,
input [15:0] PCSRSVDIN,
input [4:0] PCSRSVDIN2,
......@@ -2208,7 +2208,7 @@ module gtxe2_chnl(
output wire rx_serial_clk,
// additional ports to pll
output TSTOUT,
output [9:0] TSTOUT,
input [15:0] GTRSVD,
input [15:0] PCSRSVDIN,
input [4:0] PCSRSVDIN2,
......@@ -2428,7 +2428,7 @@ module GTXE2_GPL(
output CPLLFBCLKLOST,
output CPLLLOCK,
output CPLLREFCLKLOST,
output TSTOUT,
output [9:0] TSTOUT,
input [15:0] GTRSVD,
input [15:0] PCSRSVDIN,
input [4:0] PCSRSVDIN2,
......@@ -2445,7 +2445,7 @@ module GTXE2_GPL(
input TXPMARESET,
output TXRESETDONE,
input TXUSERRDY,
output PCSRSVDOUT,
output [15:0] PCSRSVDOUT,
// RX Reset ports, UG476 p.73
input GTRXRESET,
input RXPMARESET,
......@@ -2651,8 +2651,8 @@ module GTXE2_GPL(
input RXDLYOVRDEN,
input RXDDIEN,
output RXPHALIGNDONE,
output RXPHMONITOR,
output RXPHSLIPMONITOR,
output [4:0] RXPHMONITOR,
output [4:0] RXPHSLIPMONITOR,
output RXDLYSRESETDONE,
// RX Buffer Ports, ug476 p.259
output [2:0] RXBUFSTATUS,
......
wrapper/gtxe2_channel_wrapper.v
View file @ e4816b14
......@@ -18,7 +18,6 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
`define OPEN_SOURCE_ONLY
module gtxe2_channel_wrapper(
// clocking ports, UG476 p.37
input [2:0] CPLLREFCLKSEL,
......@@ -40,7 +39,7 @@ module gtxe2_channel_wrapper(
output CPLLFBCLKLOST,
output CPLLLOCK,
output CPLLREFCLKLOST,
output TSTOUT,
output [9:0] TSTOUT,
input [15:0] GTRSVD,
input [15:0] PCSRSVDIN,
input [4:0] PCSRSVDIN2,
......@@ -57,7 +56,7 @@ module gtxe2_channel_wrapper(
input TXPMARESET,
output TXRESETDONE,
input TXUSERRDY,
output PCSRSVDOUT,
output [15:0] PCSRSVDOUT,
// RX Reset ports, UG476 p.73
input GTRXRESET,
input RXPMARESET,
......@@ -263,8 +262,8 @@ module gtxe2_channel_wrapper(
input RXDLYOVRDEN,
input RXDDIEN,
output RXPHALIGNDONE,
output RXPHMONITOR,
output RXPHSLIPMONITOR,
output [4:0] RXPHMONITOR,
output [4:0] RXPHSLIPMONITOR,
output RXDLYSRESETDONE,
// RX Buffer Ports, ug476 p.259
output [2:0] RXBUFSTATUS,
......@@ -358,10 +357,10 @@ parameter TXPHDLY_CFG = 24'h0;
parameter TXDLY_CFG = 16'h0;
parameter TXDLY_LCFG = 9'h0;
parameter TXDLY_TAP_CFG = 16'h0;
parameter TXSYNC_MULTILANE = 1'b0;
parameter TXSYNC_SKIP_DA = 1'b0;
parameter TXSYNC_OVRD = 1'b1;
parameter LOOPBACK_CFG = 1'b0;
//parameter TXSYNC_MULTILANE = 1'b0;
//parameter TXSYNC_SKIP_DA = 1'b0;
//parameter TXSYNC_OVRD = 1'b1;
//parameter LOOPBACK_CFG = 1'b0;
// TX Pattern Generator, ug476 p.147
parameter RXPRBS_ERR_LOOPBACK = 1'b0;
// TX Fabric Clock Output Control Attributes, ug476 p. 153
......@@ -459,7 +458,7 @@ parameter RX_DATA_WIDTH = 20;
parameter RX_INT_DATAWIDTH = 0;
parameter ES_PMA_CFG = 10'h0;
// Pattern Checker Attributes, ug476 p.226
parameter RX_PRBS_ERR_CNT = 16'h15c;
//parameter RX_PRBS_ERR_CNT = 16'h15c;
// RX Byte and Word Alignment Attributes, ug476 p.235
parameter ALIGN_COMMA_WORD = 1;
parameter ALIGN_COMMA_ENABLE = 10'b1111111111;
......@@ -472,7 +471,7 @@ parameter SHOW_REALIGN_COMMA = "TRUE";
parameter RXSLIDE_MODE = "OFF";
parameter RXSLIDE_AUTO_WAIT = 7;
parameter RX_SIG_VALID_DLY = 10;
parameter COMMA_ALIGN_LATENCY = 9'h14e;
//parameter COMMA_ALIGN_LATENCY = 9'h14e;
// RX 8B/10B Decoder Attributes, ug476 p.242
parameter RX_DISPERR_SEQ_MATCH = "TRUE";
parameter DEC_MCOMMA_DETECT = "TRUE";
......@@ -608,10 +607,10 @@ GTXE2_CHANNEL #(
.TXDLY_CFG (TXDLY_CFG),
.TXDLY_LCFG (TXDLY_LCFG),
.TXDLY_TAP_CFG (TXDLY_TAP_CFG),
.TXSYNC_MULTILANE (TXSYNC_MULTILANE),
/* .TXSYNC_MULTILANE (TXSYNC_MULTILANE),
.TXSYNC_SKIP_DA (TXSYNC_SKIP_DA),
.TXSYNC_OVRD (TXSYNC_OVRD),
.LOOPBACK_CFG (LOOPBACK_CFG),
.LOOPBACK_CFG (LOOPBACK_CFG),*/
// TX Pattern Generator, ug476 p.147
.RXPRBS_ERR_LOOPBACK (RXPRBS_ERR_LOOPBACK),
// TX Fabric Clock Output Control Attributes, ug476 p. 153
......@@ -714,7 +713,7 @@ GTXE2_CHANNEL #(
.RX_INT_DATAWIDTH (RX_INT_DATAWIDTH),
.ES_PMA_CFG (ES_PMA_CFG),
// Pattern Checker Attributes, ug476 p.226
.RX_PRBS_ERR_CNT (RX_PRBS_ERR_CNT),
//.RX_PRBS_ERR_CNT (RX_PRBS_ERR_CNT),
// RX Byte and Word Alignment Attributes, ug476 p.235
.ALIGN_COMMA_WORD (ALIGN_COMMA_WORD),
.ALIGN_COMMA_ENABLE (ALIGN_COMMA_ENABLE),
......@@ -727,7 +726,7 @@ GTXE2_CHANNEL #(
.RXSLIDE_MODE (RXSLIDE_MODE),
.RXSLIDE_AUTO_WAIT (RXSLIDE_AUTO_WAIT),
.RX_SIG_VALID_DLY (RX_SIG_VALID_DLY),
.COMMA_ALIGN_LATENCY (COMMA_ALIGN_LATENCY),
//.COMMA_ALIGN_LATENCY (COMMA_ALIGN_LATENCY),
// RX 8B/10B Decoder Attributes, ug476 p.242
.RX_DISPERR_SEQ_MATCH (RX_DISPERR_SEQ_MATCH),
.DEC_MCOMMA_DETECT (DEC_MCOMMA_DETECT),
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment