Skip to content

X
x393_sata
Commit e4816b14 authored by Alexey Grebenkin's avatar Alexey Grebenkin
Browse files
Options

Few more changes to make the project synth in vdt enviroment

parent ec00bd28
Show whitespace changes
Inline Side-by-side
Showing with 4317 additions and 26 deletions
ddr3/1024Mb_ddr3_parameters.vh 0 → 120000
View file @ e4816b14
/home/alexey/tmp/sata2/x393/ddr3/1024Mb_ddr3_parameters.vh
\ No newline at end of file
ddr3/2048Mb_ddr3_parameters.vh 0 → 120000
View file @ e4816b14
/home/alexey/tmp/sata2/x393/ddr3/2048Mb_ddr3_parameters.vh
\ No newline at end of file
ddr3/4096Mb_ddr3_parameters.vh 0 → 120000
View file @ e4816b14
/home/alexey/tmp/sata2/x393/ddr3/4096Mb_ddr3_parameters.vh
\ No newline at end of file
dma/sata_top.v
View file @ e4816b14
......@@ -84,7 +84,7 @@
output wire [3:0] afi_awcache,
output wire [2:0] afi_awprot,
output wire [3:0] afi_awlen,
output wire [2:0] afi_awsize,
output wire [1:0] afi_awsize,
output wire [1:0] afi_awburst,
output wire [3:0] afi_awqos,
// write data
......@@ -113,7 +113,7 @@
output wire [3:0] afi_arcache,
output wire [2:0] afi_arprot,
output wire [3:0] afi_arlen,
output wire [2:0] afi_arsize,
output wire [1:0] afi_arsize,
output wire [1:0] afi_arburst,
output wire [3:0] afi_arqos,
// read data
......
dma/top.v
View file @ e4816b14
......@@ -90,7 +90,7 @@ wire [ 1:0] afi0_awlock; // output[1:0]
wire [ 3:0] afi0_awcache; // output[3:0]
wire [ 2:0] afi0_awprot; // output[2:0]
wire [ 3:0] afi0_awlen; // output[3:0]
wire [ 2:0] afi0_awsize; // output[2:0]
wire [ 1:0] afi0_awsize; // output[2:0]
wire [ 1:0] afi0_awburst; // output[1:0]
wire [ 3:0] afi0_awqos; // output[3:0]
wire [63:0] afi0_wdata; // output[63:0]
......@@ -114,7 +114,7 @@ wire [ 1:0] afi0_arlock; // output[1:0]
wire [ 3:0] afi0_arcache; // output[3:0]
wire [ 2:0] afi0_arprot; // output[2:0]
wire [ 3:0] afi0_arlen; // output[3:0]
wire [ 2:0] afi0_arsize; // output[2:0]
wire [ 1:0] afi0_arsize; // output[2:0]
wire [ 1:0] afi0_arburst; // output[1:0]
wire [ 3:0] afi0_arqos; // output[3:0]
wire [63:0] afi0_rdata; // input[63:0]
......
includes/coring.dat.vh 0 → 100644
View file @ e4816b14
, .INIT_00 (256'h4444444433333333333333332222222222222222111111111111111100000000)
, .INIT_01 (256'h8888888877777777777777776666666666666666555555555555555544444444)
, .INIT_02 (256'hCCCCCCCCBBBBBBBBBBBBBBBBAAAAAAAAAAAAAAAA999999999999999988888888)
, .INIT_03 (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCC)
, .INIT_04 (256'h4444444433333333333333332222222222222222111111111111111100000000)
, .INIT_05 (256'h8888888877777777777777776666666666666666555555555555555544444444)
, .INIT_06 (256'hCCCCCCCCBBBBBBBBBBBBBBBBAAAAAAAAAAAAAAAA999999999999999988888888)
, .INIT_07 (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCC)
, .INIT_08 (256'h4444444433333333333333322222222222222221111111111111100000000000)
, .INIT_09 (256'h8888888877777777777777776666666666666666555555555555555544444444)
, .INIT_0A (256'hCCCCCCCCBBBBBBBBBBBBBBBBAAAAAAAAAAAAAAAA999999999999999988888888)
, .INIT_0B (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCC)
, .INIT_0C (256'h4444444433333333333333322222222222222221111111111111100000000000)
, .INIT_0D (256'h8888888877777777777777776666666666666666555555555555555544444444)
, .INIT_0E (256'hCCCCCCCCBBBBBBBBBBBBBBBBAAAAAAAAAAAAAAAA999999999999999988888888)
, .INIT_0F (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCC)
, .INIT_10 (256'h4444444333333333333333322222222222222211111111111000000000000000)
, .INIT_11 (256'h8888888877777777777777776666666666666666555555555555555444444444)
, .INIT_12 (256'hCCCCCCCCBBBBBBBBBBBBBBBBAAAAAAAAAAAAAAAA999999999999999988888888)
, .INIT_13 (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCC)
, .INIT_14 (256'h4444444333333333333333322222222222222211111111111000000000000000)
, .INIT_15 (256'h8888888877777777777777776666666666666666555555555555555444444444)
, .INIT_16 (256'hCCCCCCCCBBBBBBBBBBBBBBBBAAAAAAAAAAAAAAAA999999999999999988888888)
, .INIT_17 (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCC)
, .INIT_18 (256'h4444443333333333333222222222211111111111100000000000000000000000)
, .INIT_19 (256'h8888888877777777777777766666666666666665555555555555555444444444)
, .INIT_1A (256'hCCCCCCCCBBBBBBBBBBBBBBBBAAAAAAAAAAAAAAAA999999999999999988888888)
, .INIT_1B (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCC)
, .INIT_1C (256'h4444443333333333333222222222211111111111100000000000000000000000)
, .INIT_1D (256'h8888888877777777777777766666666666666665555555555555555444444444)
, .INIT_1E (256'hCCCCCCCCBBBBBBBBBBBBBBBBAAAAAAAAAAAAAAAA999999999999999988888888)
, .INIT_1F (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCC)
, .INIT_20 (256'h3333333332222222222211111111111111000000000000000000000000000000)
, .INIT_21 (256'h8888888777777777777777766666666666666665555555555555544444444444)
, .INIT_22 (256'hCCCCCCCCBBBBBBBBBBBBBBBBAAAAAAAAAAAAAAAA999999999999999888888888)
, .INIT_23 (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCC)
, .INIT_24 (256'h3333333332222222222211111111111111000000000000000000000000000000)
, .INIT_25 (256'h8888888777777777777777766666666666666665555555555555544444444444)
, .INIT_26 (256'hCCCCCCCCBBBBBBBBBBBBBBBBAAAAAAAAAAAAAAAA999999999999999888888888)
, .INIT_27 (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCC)
, .INIT_28 (256'h2222222222211111111111111110000000000000000000000000000000000000)
, .INIT_29 (256'h8888888777777777777777666666666666655555555554444444443333333333)
, .INIT_2A (256'hCCCCCCCCBBBBBBBBBBBBBBBAAAAAAAAAAAAAAAA9999999999999999888888888)
, .INIT_2B (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCC)
, .INIT_2C (256'h2222222222211111111111111110000000000000000000000000000000000000)
, .INIT_2D (256'h8888888777777777777777666666666666655555555554444444443333333333)
, .INIT_2E (256'hCCCCCCCCBBBBBBBBBBBBBBBAAAAAAAAAAAAAAAA9999999999999999888888888)
, .INIT_2F (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCC)
, .INIT_31 (256'h5555444444443333333333322222222222221111111111111111111111110000)
, .INIT_32 (256'hCCCCCCCBBBBBBBBBBBBBBAAAAAAAAA9999999998888888777777766666665555)
, .INIT_33 (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCCC)
, .INIT_35 (256'h5555444444443333333333322222222222221111111111111111111111110000)
, .INIT_36 (256'hCCCCCCCBBBBBBBBBBBBBBAAAAAAAAA9999999998888888777777766666665555)
, .INIT_37 (256'hFFFFFFFFFFFFFFFFFFFFFFFFEEEEEEEEEEEEEEEDDDDDDDDDDDDDDDDCCCCCCCCC)
, .INIT_3B (256'hFFFFFFFFFEEDCBA9987766555444333332222222211111111111111111111100)
, .INIT_3F (256'hFFFFFFFFFEEDCBA9987766555444333332222222211111111111111111111100)
includes/focus_filt.dat.vh 0 → 100644
View file @ e4816b14
, .INIT_00 (256'h000008880FFF0FFF0888044401110111000008880FFF0FFF0888044401110000)
, .INIT_01 (256'h00000222044408880FFF0FFF088808880000044408880FFF0FFF088804440444)
, .INIT_02 (256'h0000000001110222044408880FFF0FFF000001110222044408880FFF0FFF0FFF)
, .INIT_03 (256'h0000000000000000000000000000000000000000000001110222044408880888)
, .INIT_04 (256'h00008888FFFFFFFF888844441111111100008888FFFFFFFF8888444411110000)
, .INIT_05 (256'h0000222244448888FFFFFFFF88888888000044448888FFFFFFFF888844444444)
, .INIT_06 (256'h000000001111222244448888FFFFFFFF00001111222244448888FFFFFFFFFFFF)
, .INIT_07 (256'h0000000000000000000000000000000000000000000011112222444488888888)
includes/huffman.dat.vh 0 → 100644
View file @ e4816b14
, .INIT_00 (256'h000800F8000700780005001A0004000B0003000400020001000200000004000A)
, .INIT_01 (256'h00020000000000000000000000000000000000000010FF830010FF82000A03F6)
, .INIT_02 (256'h0010FF850010FF84000B07F6000901F6000700790005001B0004000C00000000)
, .INIT_03 (256'h00030002000000000000000000000000000000000010FF880010FF870010FF86)
, .INIT_04 (256'h0010FF8B0010FF8A0010FF89000C0FF4000A03F7000800F90005001C00000000)
, .INIT_05 (256'h00030003000000000000000000000000000000000010FF8E0010FF8D0010FF8C)
, .INIT_06 (256'h0010FF920010FF910010FF900010FF8F000C0FF5000901F70006003A00000000)
, .INIT_07 (256'h00030004000000000000000000000000000000000010FF950010FF940010FF93)
, .INIT_08 (256'h0010FF9A0010FF990010FF980010FF970010FF96000A03F80006003B00000000)
, .INIT_09 (256'h00030005000000000000000000000000000000000010FF9D0010FF9C0010FF9B)
, .INIT_0A (256'h0010FFA20010FFA10010FFA00010FF9F0010FF9E000B07F70007007A00000000)
, .INIT_0B (256'h00030006000000000000000000000000000000000010FFA50010FFA40010FFA3)
, .INIT_0C (256'h0010FFAA0010FFA90010FFA80010FFA70010FFA6000C0FF60007007B00000000)
, .INIT_0D (256'h0004000E000000000000000000000000000000000010FFAD0010FFAC0010FFAB)
, .INIT_0E (256'h0010FFB20010FFB10010FFB00010FFAF0010FFAE000C0FF7000800FA00000000)
, .INIT_0F (256'h0005001E000000000000000000000000000000000010FFB50010FFB40010FFB3)
, .INIT_10 (256'h0010FFBA0010FFB90010FFB80010FFB70010FFB6000F7FC0000901F800000000)
, .INIT_11 (256'h0006003E000000000000000000000000000000000010FFBD0010FFBC0010FFBB)
, .INIT_12 (256'h0010FFC30010FFC20010FFC10010FFC00010FFBF0010FFBE000901F900000000)
, .INIT_13 (256'h0007007E000000000000000000000000000000000010FFC60010FFC50010FFC4)
, .INIT_14 (256'h0010FFCC0010FFCB0010FFCA0010FFC90010FFC80010FFC7000901FA00000000)
, .INIT_15 (256'h000800FE000000000000000000000000000000000010FFCF0010FFCE0010FFCD)
, .INIT_16 (256'h0010FFD50010FFD40010FFD30010FFD20010FFD10010FFD0000A03F900000000)
, .INIT_17 (256'h000901FE000000000000000000000000000000000010FFD80010FFD70010FFD6)
, .INIT_18 (256'h0010FFDE0010FFDD0010FFDC0010FFDB0010FFDA0010FFD9000A03FA00000000)
, .INIT_19 (256'h00000000000000000000000000000000000000000010FFE10010FFE00010FFDF)
, .INIT_1A (256'h0010FFE70010FFE60010FFE50010FFE40010FFE30010FFE2000B07F800000000)
, .INIT_1B (256'h00000000000000000000000000000000000000000010FFEA0010FFE90010FFE8)
, .INIT_1C (256'h0010FFF10010FFF00010FFEF0010FFEE0010FFED0010FFEC0010FFEB00000000)
, .INIT_1D (256'h00000000000000000000000000000000000000000010FFF40010FFF30010FFF2)
, .INIT_1E (256'h0010FFFB0010FFFA0010FFF90010FFF80010FFF70010FFF60010FFF5000B07F9)
, .INIT_1F (256'h00000000000000000000000000000000000000000010FFFE0010FFFD0010FFFC)
, .INIT_20 (256'h000700780006003800050019000500180004000A000300040002000100020000)
, .INIT_21 (256'h0002000000000000000000000000000000000000000C0FF4000A03F6000901F4)
, .INIT_22 (256'h0010FF88000C0FF5000B07F6000901F5000800F6000600390004000B00000000)
, .INIT_23 (256'h00020001000000000000000000000000000000000010FF8B0010FF8A0010FF89)
, .INIT_24 (256'h0010FF8D0010FF8C000F7FC2000C0FF6000A03F7000800F70005001A00000000)
, .INIT_25 (256'h00020002000000000000000000000000000000000010FF900010FF8F0010FF8E)
, .INIT_26 (256'h0010FF930010FF920010FF91000C0FF7000A03F8000800F80005001B00000000)
, .INIT_27 (256'h00030006000000000000000000000000000000000010FF960010FF950010FF94)
, .INIT_28 (256'h0010FF9B0010FF9A0010FF990010FF980010FF97000901F60006003A00000000)
, .INIT_29 (256'h0004000E000000000000000000000000000000000010FF9E0010FF9D0010FF9C)
, .INIT_2A (256'h0010FFA30010FFA20010FFA10010FFA00010FF9F000A03F90006003B00000000)
, .INIT_2B (256'h0005001E000000000000000000000000000000000010FFA60010FFA50010FFA4)
, .INIT_2C (256'h0010FFAB0010FFAA0010FFA90010FFA80010FFA7000B07F70007007900000000)
, .INIT_2D (256'h0006003E000000000000000000000000000000000010FFAE0010FFAD0010FFAC)
, .INIT_2E (256'h0010FFB30010FFB20010FFB10010FFB00010FFAF000B07F80007007A00000000)
, .INIT_2F (256'h0007007E000000000000000000000000000000000010FFB60010FFB50010FFB4)
, .INIT_30 (256'h0010FFBC0010FFBB0010FFBA0010FFB90010FFB80010FFB7000800F900000000)
, .INIT_31 (256'h000800FE000000000000000000000000000000000010FFBF0010FFBE0010FFBD)
, .INIT_32 (256'h0010FFC50010FFC40010FFC30010FFC20010FFC10010FFC0000901F700000000)
, .INIT_33 (256'h000901FE000000000000000000000000000000000010FFC80010FFC70010FFC6)
, .INIT_34 (256'h0010FFCE0010FFCD0010FFCC0010FFCB0010FFCA0010FFC9000901F800000000)
, .INIT_35 (256'h000A03FE000000000000000000000000000000000010FFD10010FFD00010FFCF)
, .INIT_36 (256'h0010FFD70010FFD60010FFD50010FFD40010FFD30010FFD2000901F900000000)
, .INIT_37 (256'h000B07FE000000000000000000000000000000000010FFDA0010FFD90010FFD8)
, .INIT_38 (256'h0010FFE00010FFDF0010FFDE0010FFDD0010FFDC0010FFDB000901FA00000000)
, .INIT_39 (256'h00000000000000000000000000000000000000000010FFE30010FFE20010FFE1)
, .INIT_3A (256'h0010FFE90010FFE80010FFE70010FFE60010FFE50010FFE4000B07F900000000)
, .INIT_3B (256'h00000000000000000000000000000000000000000010FFEC0010FFEB0010FFEA)
, .INIT_3C (256'h0010FFF20010FFF10010FFF00010FFEF0010FFEE0010FFED000E3FE000000000)
, .INIT_3D (256'h00000000000000000000000000000000000000000010FFF50010FFF40010FFF3)
, .INIT_3E (256'h0010FFFB0010FFFA0010FFF90010FFF80010FFF70010FFF6000F7FC3000A03FA)
, .INIT_3F (256'h00000000000000000000000000000000000000000010FFFE0010FFFD0010FFFC)
includes/linear1028rgb.dat.vh 0 → 100644
View file @ e4816b14
, .INIT_00 (256'h103C103810341030102C102810241020101C101810141010100C100810041000)
, .INIT_01 (256'h107C107810741070106C106810641060105C105810541050104C104810441040)
, .INIT_02 (256'h10BC10B810B410B010AC10A810A410A0109C109810941090108C108810841080)
, .INIT_03 (256'h10FC10F810F410F010EC10E810E410E010DC10D810D410D010CC10C810C410C0)
, .INIT_04 (256'h113C113811341130112C112811241120111C111811141110110C110811041100)
, .INIT_05 (256'h117C117811741170116C116811641160115C115811541150114C114811441140)
, .INIT_06 (256'h11BC11B811B411B011AC11A811A411A0119C119811941190118C118811841180)
, .INIT_07 (256'h11FC11F811F411F011EC11E811E411E011DC11D811D411D011CC11C811C411C0)
, .INIT_08 (256'h123C123812341230122C122812241220121C121812141210120C120812041200)
, .INIT_09 (256'h127C127812741270126C126812641260125C125812541250124C124812441240)
, .INIT_0A (256'h12BC12B812B412B012AC12A812A412A0129C129812941290128C128812841280)
, .INIT_0B (256'h12FC12F812F412F012EC12E812E412E012DC12D812D412D012CC12C812C412C0)
, .INIT_0C (256'h133C133813341330132C132813241320131C131813141310130C130813041300)
, .INIT_0D (256'h137C137813741370136C136813641360135C135813541350134C134813441340)
, .INIT_0E (256'h13BC13B813B413B013AC13A813A413A0139C139813941390138C138813841380)
, .INIT_0F (256'h0FFC13F813F413F013EC13E813E413E013DC13D813D413D013CC13C813C413C0)
, .INIT_10 (256'h103C103810341030102C102810241020101C101810141010100C100810041000)
, .INIT_11 (256'h107C107810741070106C106810641060105C105810541050104C104810441040)
, .INIT_12 (256'h10BC10B810B410B010AC10A810A410A0109C109810941090108C108810841080)
, .INIT_13 (256'h10FC10F810F410F010EC10E810E410E010DC10D810D410D010CC10C810C410C0)
, .INIT_14 (256'h113C113811341130112C112811241120111C111811141110110C110811041100)
, .INIT_15 (256'h117C117811741170116C116811641160115C115811541150114C114811441140)
, .INIT_16 (256'h11BC11B811B411B011AC11A811A411A0119C119811941190118C118811841180)
, .INIT_17 (256'h11FC11F811F411F011EC11E811E411E011DC11D811D411D011CC11C811C411C0)
, .INIT_18 (256'h123C123812341230122C122812241220121C121812141210120C120812041200)
, .INIT_19 (256'h127C127812741270126C126812641260125C125812541250124C124812441240)
, .INIT_1A (256'h12BC12B812B412B012AC12A812A412A0129C129812941290128C128812841280)
, .INIT_1B (256'h12FC12F812F412F012EC12E812E412E012DC12D812D412D012CC12C812C412C0)
, .INIT_1C (256'h133C133813341330132C132813241320131C131813141310130C130813041300)
, .INIT_1D (256'h137C137813741370136C136813641360135C135813541350134C134813441340)
, .INIT_1E (256'h13BC13B813B413B013AC13A813A413A0139C139813941390138C138813841380)
, .INIT_1F (256'h0FFC13F813F413F013EC13E813E413E013DC13D813D413D013CC13C813C413C0)
, .INIT_20 (256'h103C103810341030102C102810241020101C101810141010100C100810041000)
, .INIT_21 (256'h107C107810741070106C106810641060105C105810541050104C104810441040)
, .INIT_22 (256'h10BC10B810B410B010AC10A810A410A0109C109810941090108C108810841080)
, .INIT_23 (256'h10FC10F810F410F010EC10E810E410E010DC10D810D410D010CC10C810C410C0)
, .INIT_24 (256'h113C113811341130112C112811241120111C111811141110110C110811041100)
, .INIT_25 (256'h117C117811741170116C116811641160115C115811541150114C114811441140)
, .INIT_26 (256'h11BC11B811B411B011AC11A811A411A0119C119811941190118C118811841180)
, .INIT_27 (256'h11FC11F811F411F011EC11E811E411E011DC11D811D411D011CC11C811C411C0)
, .INIT_28 (256'h123C123812341230122C122812241220121C121812141210120C120812041200)
, .INIT_29 (256'h127C127812741270126C126812641260125C125812541250124C124812441240)
, .INIT_2A (256'h12BC12B812B412B012AC12A812A412A0129C129812941290128C128812841280)
, .INIT_2B (256'h12FC12F812F412F012EC12E812E412E012DC12D812D412D012CC12C812C412C0)
, .INIT_2C (256'h133C133813341330132C132813241320131C131813141310130C130813041300)
, .INIT_2D (256'h137C137813741370136C136813641360135C135813541350134C134813441340)
, .INIT_2E (256'h13BC13B813B413B013AC13A813A413A0139C139813941390138C138813841380)
, .INIT_2F (256'h0FFC13F813F413F013EC13E813E413E013DC13D813D413D013CC13C813C413C0)
, .INIT_30 (256'h103C103810341030102C102810241020101C101810141010100C100810041000)
, .INIT_31 (256'h107C107810741070106C106810641060105C105810541050104C104810441040)
, .INIT_32 (256'h10BC10B810B410B010AC10A810A410A0109C109810941090108C108810841080)
, .INIT_33 (256'h10FC10F810F410F010EC10E810E410E010DC10D810D410D010CC10C810C410C0)
, .INIT_34 (256'h113C113811341130112C112811241120111C111811141110110C110811041100)
, .INIT_35 (256'h117C117811741170116C116811641160115C115811541150114C114811441140)
, .INIT_36 (256'h11BC11B811B411B011AC11A811A411A0119C119811941190118C118811841180)
, .INIT_37 (256'h11FC11F811F411F011EC11E811E411E011DC11D811D411D011CC11C811C411C0)
, .INIT_38 (256'h123C123812341230122C122812241220121C121812141210120C120812041200)
, .INIT_39 (256'h127C127812741270126C126812641260125C125812541250124C124812441240)
, .INIT_3A (256'h12BC12B812B412B012AC12A812A412A0129C129812941290128C128812841280)
, .INIT_3B (256'h12FC12F812F412F012EC12E812E412E012DC12D812D412D012CC12C812C412C0)
, .INIT_3C (256'h133C133813341330132C132813241320131C131813141310130C130813041300)
, .INIT_3D (256'h137C137813741370136C136813641360135C135813541350134C134813441340)
, .INIT_3E (256'h13BC13B813B413B013AC13A813A413A0139C139813941390138C138813841380)
, .INIT_3F (256'h0FFC13F813F413F013EC13E813E413E013DC13D813D413D013CC13C813C413C0)
, .INIT_40 (256'h103C103810341030102C102810241020101C101810141010100C100810041000)
, .INIT_41 (256'h107C107810741070106C106810641060105C105810541050104C104810441040)
, .INIT_42 (256'h10BC10B810B410B010AC10A810A410A0109C109810941090108C108810841080)
, .INIT_43 (256'h10FC10F810F410F010EC10E810E410E010DC10D810D410D010CC10C810C410C0)
, .INIT_44 (256'h113C113811341130112C112811241120111C111811141110110C110811041100)
, .INIT_45 (256'h117C117811741170116C116811641160115C115811541150114C114811441140)
, .INIT_46 (256'h11BC11B811B411B011AC11A811A411A0119C119811941190118C118811841180)
, .INIT_47 (256'h11FC11F811F411F011EC11E811E411E011DC11D811D411D011CC11C811C411C0)
, .INIT_48 (256'h123C123812341230122C122812241220121C121812141210120C120812041200)
, .INIT_49 (256'h127C127812741270126C126812641260125C125812541250124C124812441240)
, .INIT_4A (256'h12BC12B812B412B012AC12A812A412A0129C129812941290128C128812841280)
, .INIT_4B (256'h12FC12F812F412F012EC12E812E412E012DC12D812D412D012CC12C812C412C0)
, .INIT_4C (256'h133C133813341330132C132813241320131C131813141310130C130813041300)
, .INIT_4D (256'h137C137813741370136C136813641360135C135813541350134C134813441340)
, .INIT_4E (256'h13BC13B813B413B013AC13A813A413A0139C139813941390138C138813841380)
, .INIT_4F (256'h0FFC13F813F413F013EC13E813E413E013DC13D813D413D013CC13C813C413C0)
, .INIT_50 (256'h103C103810341030102C102810241020101C101810141010100C100810041000)
, .INIT_51 (256'h107C107810741070106C106810641060105C105810541050104C104810441040)
, .INIT_52 (256'h10BC10B810B410B010AC10A810A410A0109C109810941090108C108810841080)
, .INIT_53 (256'h10FC10F810F410F010EC10E810E410E010DC10D810D410D010CC10C810C410C0)
, .INIT_54 (256'h113C113811341130112C112811241120111C111811141110110C110811041100)
, .INIT_55 (256'h117C117811741170116C116811641160115C115811541150114C114811441140)
, .INIT_56 (256'h11BC11B811B411B011AC11A811A411A0119C119811941190118C118811841180)
, .INIT_57 (256'h11FC11F811F411F011EC11E811E411E011DC11D811D411D011CC11C811C411C0)
, .INIT_58 (256'h123C123812341230122C122812241220121C121812141210120C120812041200)
, .INIT_59 (256'h127C127812741270126C126812641260125C125812541250124C124812441240)
, .INIT_5A (256'h12BC12B812B412B012AC12A812A412A0129C129812941290128C128812841280)
, .INIT_5B (256'h12FC12F812F412F012EC12E812E412E012DC12D812D412D012CC12C812C412C0)
, .INIT_5C (256'h133C133813341330132C132813241320131C131813141310130C130813041300)
, .INIT_5D (256'h137C137813741370136C136813641360135C135813541350134C134813441340)
, .INIT_5E (256'h13BC13B813B413B013AC13A813A413A0139C139813941390138C138813841380)
, .INIT_5F (256'h0FFC13F813F413F013EC13E813E413E013DC13D813D413D013CC13C813C413C0)
, .INIT_60 (256'h103C103810341030102C102810241020101C101810141010100C100810041000)
, .INIT_61 (256'h107C107810741070106C106810641060105C105810541050104C104810441040)
, .INIT_62 (256'h10BC10B810B410B010AC10A810A410A0109C109810941090108C108810841080)
, .INIT_63 (256'h10FC10F810F410F010EC10E810E410E010DC10D810D410D010CC10C810C410C0)
, .INIT_64 (256'h113C113811341130112C112811241120111C111811141110110C110811041100)
, .INIT_65 (256'h117C117811741170116C116811641160115C115811541150114C114811441140)
, .INIT_66 (256'h11BC11B811B411B011AC11A811A411A0119C119811941190118C118811841180)
, .INIT_67 (256'h11FC11F811F411F011EC11E811E411E011DC11D811D411D011CC11C811C411C0)
, .INIT_68 (256'h123C123812341230122C122812241220121C121812141210120C120812041200)
, .INIT_69 (256'h127C127812741270126C126812641260125C125812541250124C124812441240)
, .INIT_6A (256'h12BC12B812B412B012AC12A812A412A0129C129812941290128C128812841280)
, .INIT_6B (256'h12FC12F812F412F012EC12E812E412E012DC12D812D412D012CC12C812C412C0)
, .INIT_6C (256'h133C133813341330132C132813241320131C131813141310130C130813041300)
, .INIT_6D (256'h137C137813741370136C136813641360135C135813541350134C134813441340)
, .INIT_6E (256'h13BC13B813B413B013AC13A813A413A0139C139813941390138C138813841380)
, .INIT_6F (256'h0FFC13F813F413F013EC13E813E413E013DC13D813D413D013CC13C813C413C0)
, .INIT_70 (256'h103C103810341030102C102810241020101C101810141010100C100810041000)
, .INIT_71 (256'h107C107810741070106C106810641060105C105810541050104C104810441040)
, .INIT_72 (256'h10BC10B810B410B010AC10A810A410A0109C109810941090108C108810841080)
, .INIT_73 (256'h10FC10F810F410F010EC10E810E410E010DC10D810D410D010CC10C810C410C0)
, .INIT_74 (256'h113C113811341130112C112811241120111C111811141110110C110811041100)
, .INIT_75 (256'h117C117811741170116C116811641160115C115811541150114C114811441140)
, .INIT_76 (256'h11BC11B811B411B011AC11A811A411A0119C119811941190118C118811841180)
, .INIT_77 (256'h11FC11F811F411F011EC11E811E411E011DC11D811D411D011CC11C811C411C0)
, .INIT_78 (256'h123C123812341230122C122812241220121C121812141210120C120812041200)
, .INIT_79 (256'h127C127812741270126C126812641260125C125812541250124C124812441240)
, .INIT_7A (256'h12BC12B812B412B012AC12A812A412A0129C129812941290128C128812841280)
, .INIT_7B (256'h12FC12F812F412F012EC12E812E412E012DC12D812D412D012CC12C812C412C0)
, .INIT_7C (256'h133C133813341330132C132813241320131C131813141310130C130813041300)
, .INIT_7D (256'h137C137813741370136C136813641360135C135813541350134C134813441340)
, .INIT_7E (256'h13BC13B813B413B013AC13A813A413A0139C139813941390138C138813841380)
, .INIT_7F (256'h0FFC13F813F413F013EC13E813E413E013DC13D813D413D013CC13C813C413C0)
includes/quantization_100.dat.vh 0 → 100644
View file @ e4816b14
, .INIT_00 (256'hFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
, .INIT_01 (256'hFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
, .INIT_02 (256'hFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
, .INIT_03 (256'hFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
, .INIT_04 (256'hFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
, .INIT_05 (256'hFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
, .INIT_06 (256'hFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
, .INIT_07 (256'hFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
, .INIT_08 (256'h2000333040005550555040005550555055505550800080005550800080005550)
, .INIT_09 (256'h19A017401550155019A0155020002AB02490249019A033304000400033303330)
, .INIT_0A (256'h0F1010000BA010001740174012500F10125013B010000E40125013B017401740)
, .INIT_0B (256'h0CD00C300CD00E400AB00CD00BA00AB00B20111015500C300C300C300CD00D80)
, .INIT_0C (256'h0CD00CD013B0174013B00CD01C70333033301C70333040003330400040005550)
, .INIT_0D (256'h0CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD0)
, .INIT_0E (256'h0CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD0)
, .INIT_0F (256'h0CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD00CD0)
includes/ram18_declare_init.vh 0 → 100644
View file @ e4816b14
parameter INITP_00 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_01 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_02 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_03 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_04 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_05 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_06 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_07 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_00 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_01 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_02 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_03 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_04 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_05 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_06 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_07 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_08 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_09 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_0A = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_0B = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_0C = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_0D = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_0E = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_0F = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_10 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_11 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_12 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_13 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_14 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_15 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_16 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_17 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_18 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_19 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_1A = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_1B = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_1C = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_1D = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_1E = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_1F = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_20 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_21 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_22 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_23 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_24 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_25 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_26 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_27 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_28 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_29 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_2A = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_2B = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_2C = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_2D = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_2E = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_2F = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_30 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_31 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_32 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_33 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_34 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_35 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_36 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_37 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_38 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_39 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_3A = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_3B = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_3C = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_3D = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_3E = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_3F = 256'h0000000000000000000000000000000000000000000000000000000000000000
includes/ram18_pass_init.vh 0 → 100644
View file @ e4816b14
, .INITP_00 (INITP_00)
, .INITP_01 (INITP_01)
, .INITP_02 (INITP_02)
, .INITP_03 (INITP_03)
, .INITP_04 (INITP_04)
, .INITP_05 (INITP_05)
, .INITP_06 (INITP_06)
, .INITP_07 (INITP_07)
, .INIT_00 (INIT_00)
, .INIT_01 (INIT_01)
, .INIT_02 (INIT_02)
, .INIT_03 (INIT_03)
, .INIT_04 (INIT_04)
, .INIT_05 (INIT_05)
, .INIT_06 (INIT_06)
, .INIT_07 (INIT_07)
, .INIT_08 (INIT_08)
, .INIT_09 (INIT_09)
, .INIT_0A (INIT_0A)
, .INIT_0B (INIT_0B)
, .INIT_0C (INIT_0C)
, .INIT_0D (INIT_0D)
, .INIT_0E (INIT_0E)
, .INIT_0F (INIT_0F)
, .INIT_10 (INIT_10)
, .INIT_11 (INIT_11)
, .INIT_12 (INIT_12)
, .INIT_13 (INIT_13)
, .INIT_14 (INIT_14)
, .INIT_15 (INIT_15)
, .INIT_16 (INIT_16)
, .INIT_17 (INIT_17)
, .INIT_18 (INIT_18)
, .INIT_19 (INIT_19)
, .INIT_1A (INIT_1A)
, .INIT_1B (INIT_1B)
, .INIT_1C (INIT_1C)
, .INIT_1D (INIT_1D)
, .INIT_1E (INIT_1E)
, .INIT_1F (INIT_1F)
, .INIT_20 (INIT_20)
, .INIT_21 (INIT_21)
, .INIT_22 (INIT_22)
, .INIT_23 (INIT_23)
, .INIT_24 (INIT_24)
, .INIT_25 (INIT_25)
, .INIT_26 (INIT_26)
, .INIT_27 (INIT_27)
, .INIT_28 (INIT_28)
, .INIT_29 (INIT_29)
, .INIT_2A (INIT_2A)
, .INIT_2B (INIT_2B)
, .INIT_2C (INIT_2C)
, .INIT_2D (INIT_2D)
, .INIT_2E (INIT_2E)
, .INIT_2F (INIT_2F)
, .INIT_30 (INIT_30)
, .INIT_31 (INIT_31)
, .INIT_32 (INIT_32)
, .INIT_33 (INIT_33)
, .INIT_34 (INIT_34)
, .INIT_35 (INIT_35)
, .INIT_36 (INIT_36)
, .INIT_37 (INIT_37)
, .INIT_38 (INIT_38)
, .INIT_39 (INIT_39)
, .INIT_3A (INIT_3A)
, .INIT_3B (INIT_3B)
, .INIT_3C (INIT_3C)
, .INIT_3D (INIT_3D)
, .INIT_3E (INIT_3E)
, .INIT_3F (INIT_3F)
includes/ram36_declare_init.vh 0 → 100644
View file @ e4816b14
parameter INITP_00 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_01 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_02 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_03 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_04 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_05 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_06 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_07 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_08 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_09 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_0A = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_0B = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_0C = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_0D = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_0E = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INITP_0F = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_00 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_01 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_02 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_03 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_04 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_05 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_06 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_07 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_08 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_09 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_0A = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_0B = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_0C = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_0D = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_0E = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_0F = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_10 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_11 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_12 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_13 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_14 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_15 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_16 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_17 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_18 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_19 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_1A = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_1B = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_1C = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_1D = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_1E = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_1F = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_20 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_21 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_22 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_23 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_24 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_25 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_26 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_27 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_28 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_29 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_2A = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_2B = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_2C = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_2D = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_2E = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_2F = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_30 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_31 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_32 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_33 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_34 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_35 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_36 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_37 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_38 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_39 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_3A = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_3B = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_3C = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_3D = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_3E = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_3F = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_40 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_41 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_42 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_43 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_44 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_45 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_46 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_47 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_48 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_49 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_4A = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_4B = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_4C = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_4D = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_4E = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_4F = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_50 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_51 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_52 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_53 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_54 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_55 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_56 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_57 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_58 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_59 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_5A = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_5B = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_5C = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_5D = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_5E = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_5F = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_60 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_61 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_62 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_63 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_64 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_65 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_66 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_67 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_68 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_69 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_6A = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_6B = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_6C = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_6D = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_6E = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_6F = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_70 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_71 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_72 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_73 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_74 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_75 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_76 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_77 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_78 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_79 = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_7A = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_7B = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_7C = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_7D = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_7E = 256'h0000000000000000000000000000000000000000000000000000000000000000,
parameter INIT_7F = 256'h0000000000000000000000000000000000000000000000000000000000000000
includes/ram36_pass_init.vh 0 → 100644
View file @ e4816b14
, .INITP_00 (INITP_00)
, .INITP_01 (INITP_01)
, .INITP_02 (INITP_02)
, .INITP_03 (INITP_03)
, .INITP_04 (INITP_04)
, .INITP_05 (INITP_05)
, .INITP_06 (INITP_06)
, .INITP_07 (INITP_07)
, .INITP_08 (INITP_08)
, .INITP_09 (INITP_09)
, .INITP_0A (INITP_0A)
, .INITP_0B (INITP_0B)
, .INITP_0C (INITP_0C)
, .INITP_0D (INITP_0D)
, .INITP_0E (INITP_0E)
, .INITP_0F (INITP_0F)
, .INIT_00 (INIT_00)
, .INIT_01 (INIT_01)
, .INIT_02 (INIT_02)
, .INIT_03 (INIT_03)
, .INIT_04 (INIT_04)
, .INIT_05 (INIT_05)
, .INIT_06 (INIT_06)
, .INIT_07 (INIT_07)
, .INIT_08 (INIT_08)
, .INIT_09 (INIT_09)
, .INIT_0A (INIT_0A)
, .INIT_0B (INIT_0B)
, .INIT_0C (INIT_0C)
, .INIT_0D (INIT_0D)
, .INIT_0E (INIT_0E)
, .INIT_0F (INIT_0F)
, .INIT_10 (INIT_10)
, .INIT_11 (INIT_11)
, .INIT_12 (INIT_12)
, .INIT_13 (INIT_13)
, .INIT_14 (INIT_14)
, .INIT_15 (INIT_15)
, .INIT_16 (INIT_16)
, .INIT_17 (INIT_17)
, .INIT_18 (INIT_18)
, .INIT_19 (INIT_19)
, .INIT_1A (INIT_1A)
, .INIT_1B (INIT_1B)
, .INIT_1C (INIT_1C)
, .INIT_1D (INIT_1D)
, .INIT_1E (INIT_1E)
, .INIT_1F (INIT_1F)
, .INIT_20 (INIT_20)
, .INIT_21 (INIT_21)
, .INIT_22 (INIT_22)
, .INIT_23 (INIT_23)
, .INIT_24 (INIT_24)
, .INIT_25 (INIT_25)
, .INIT_26 (INIT_26)
, .INIT_27 (INIT_27)
, .INIT_28 (INIT_28)
, .INIT_29 (INIT_29)
, .INIT_2A (INIT_2A)
, .INIT_2B (INIT_2B)
, .INIT_2C (INIT_2C)
, .INIT_2D (INIT_2D)
, .INIT_2E (INIT_2E)
, .INIT_2F (INIT_2F)
, .INIT_30 (INIT_30)
, .INIT_31 (INIT_31)
, .INIT_32 (INIT_32)
, .INIT_33 (INIT_33)
, .INIT_34 (INIT_34)
, .INIT_35 (INIT_35)
, .INIT_36 (INIT_36)
, .INIT_37 (INIT_37)
, .INIT_38 (INIT_38)
, .INIT_39 (INIT_39)
, .INIT_3A (INIT_3A)
, .INIT_3B (INIT_3B)
, .INIT_3C (INIT_3C)
, .INIT_3D (INIT_3D)
, .INIT_3E (INIT_3E)
, .INIT_3F (INIT_3F)
, .INIT_40 (INIT_40)
, .INIT_41 (INIT_41)
, .INIT_42 (INIT_42)
, .INIT_43 (INIT_43)
, .INIT_44 (INIT_44)
, .INIT_45 (INIT_45)
, .INIT_46 (INIT_46)
, .INIT_47 (INIT_47)
, .INIT_48 (INIT_48)
, .INIT_49 (INIT_49)
, .INIT_4A (INIT_4A)
, .INIT_4B (INIT_4B)
, .INIT_4C (INIT_4C)
, .INIT_4D (INIT_4D)
, .INIT_4E (INIT_4E)
, .INIT_4F (INIT_4F)
, .INIT_50 (INIT_50)
, .INIT_51 (INIT_51)
, .INIT_52 (INIT_52)
, .INIT_53 (INIT_53)
, .INIT_54 (INIT_54)
, .INIT_55 (INIT_55)
, .INIT_56 (INIT_56)
, .INIT_57 (INIT_57)
, .INIT_58 (INIT_58)
, .INIT_59 (INIT_59)
, .INIT_5A (INIT_5A)
, .INIT_5B (INIT_5B)
, .INIT_5C (INIT_5C)
, .INIT_5D (INIT_5D)
, .INIT_5E (INIT_5E)
, .INIT_5F (INIT_5F)
, .INIT_60 (INIT_60)
, .INIT_61 (INIT_61)
, .INIT_62 (INIT_62)
, .INIT_63 (INIT_63)
, .INIT_64 (INIT_64)
, .INIT_65 (INIT_65)
, .INIT_66 (INIT_66)
, .INIT_67 (INIT_67)
, .INIT_68 (INIT_68)
, .INIT_69 (INIT_69)
, .INIT_6A (INIT_6A)
, .INIT_6B (INIT_6B)
, .INIT_6C (INIT_6C)
, .INIT_6D (INIT_6D)
, .INIT_6E (INIT_6E)
, .INIT_6F (INIT_6F)
, .INIT_70 (INIT_70)
, .INIT_71 (INIT_71)
, .INIT_72 (INIT_72)
, .INIT_73 (INIT_73)
, .INIT_74 (INIT_74)
, .INIT_75 (INIT_75)
, .INIT_76 (INIT_76)
, .INIT_77 (INIT_77)
, .INIT_78 (INIT_78)
, .INIT_79 (INIT_79)
, .INIT_7A (INIT_7A)
, .INIT_7B (INIT_7B)
, .INIT_7C (INIT_7C)
, .INIT_7D (INIT_7D)
, .INIT_7E (INIT_7E)
, .INIT_7F (INIT_7F)
includes/tasks_tests_memory.vh 0 → 100644
View file @ e4816b14
/*******************************************************************************
* Module: tasks_tests_memory
* Date:2015-08-01
* Author: andrey
* Description: Top-level tasks for testing memory subsystem functionality
*
* Copyright (c) 2015 Elphel, Inc .
* tasks_tests_memory.vh is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* tasks_tests_memory.vh is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
task test_write_levelling; // SuppressThisWarning VEditor - may be unused
begin
// Set special values for DQS idelay for write leveling
wait_ps_pio_done(DEFAULT_STATUS_MODE,1); // not no interrupt running cycle - delays are changed immediately
axi_set_dqs_idelay_wlv;
// Set write buffer (from DDR3) WE signal delay for write leveling mode
axi_set_wbuf_delay(WBUF_DLY_WLV);
axi_set_dqs_odelay('h80); // 'h80 - inverted, 'h60 - not - 'h80 will cause warnings during simulation
schedule_ps_pio ( // schedule software-control memory operation (may need to check FIFO status first)
WRITELEV_OFFSET, // input [9:0] seq_addr; // sequence start address
0, // input [1:0] page; // buffer page number
0, // input urgent; // high priority request (only for competion with other channels, wiil not pass in this FIFO)
0, // input chn; // channel buffer to use: 0 - memory read, 1 - memory write
`PS_PIO_WAIT_COMPLETE );// wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
wait_ps_pio_done(DEFAULT_STATUS_MODE,1); // wait previous memory transaction finished before changing delays (effective immediately)
read_block_buf_chn (0, 0, 32, 1 ); // chn=0, page=0, number of 32-bit words=32, wait_done
// @ (negedge rstb);
axi_set_dqs_odelay(DLY_DQS_ODELAY);
schedule_ps_pio ( // schedule software-control memory operation (may need to check FIFO status first)
WRITELEV_OFFSET, // input [9:0] seq_addr; // sequence start address
1, // input [1:0] page; // buffer page number
0, // input urgent; // high priority request (only for competion with other channels, wiil not pass in this FIFO)
0, // input chn; // channel buffer to use: 0 - memory read, 1 - memory write
`PS_PIO_WAIT_COMPLETE );// wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
wait_ps_pio_done(DEFAULT_STATUS_MODE,1); // wait previous memory transaction finished before changing delays (effective immediately)
read_block_buf_chn (0, 1, 32, 1 ); // chn=0, page=1, number of 32-bit words=32, wait_done
// task wait_read_queue_empty; - alternative way to check fo empty read queue
// @ (negedge rstb);
axi_set_dqs_idelay_nominal;
axi_set_dqs_odelay_nominal;
// axi_set_dqs_odelay('h78);
axi_set_wbuf_delay(WBUF_DLY_DFLT); //DFLT_WBUF_DELAY
end
endtask
task test_read_pattern; // SuppressThisWarning VEditor - may be unused
begin
schedule_ps_pio ( // schedule software-control memory operation (may need to check FIFO status first)
READ_PATTERN_OFFSET, // input [9:0] seq_addr; // sequence start address
2, // input [1:0] page; // buffer page number
0, // input urgent; // high priority request (only for competion with other channels, wiil not pass in this FIFO)
0, // input chn; // channel buffer to use: 0 - memory read, 1 - memory write
`PS_PIO_WAIT_COMPLETE );// wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
wait_ps_pio_done(DEFAULT_STATUS_MODE,1); // wait previous memory transaction finished before changing delays (effective immediately)
read_block_buf_chn (0, 2, 32, 1 ); // chn=0, page=2, number of 32-bit words=32, wait_done
end
endtask
task test_write_block; // SuppressThisWarning VEditor - may be unused
begin
// write_block_buf_chn; // fill block memory - already set in set_up task
schedule_ps_pio ( // schedule software-control memory operation (may need to check FIFO status first)
WRITE_BLOCK_OFFSET, // input [9:0] seq_addr; // sequence start address
0, // input [1:0] page; // buffer page number
0, // input urgent; // high priority request (only for competion with other channels, wiil not pass in this FIFO)
1, // input chn; // channel buffer to use: 0 - memory read, 1 - memory write
`PS_PIO_WAIT_COMPLETE );// wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
// tempoary - for debugging:
// wait_ps_pio_done(DEFAULT_STATUS_MODE,1); // wait previous memory transaction finished before changing delays (effective immediately)
end
endtask
task test_read_block; // SuppressThisWarning VEditor - may be unused
begin
schedule_ps_pio ( // schedule software-control memory operation (may need to check FIFO status first)
READ_BLOCK_OFFSET, // input [9:0] seq_addr; // sequence start address
3, // input [1:0] page; // buffer page number
0, // input urgent; // high priority request (only for competion with other channels, wiil not pass in this FIFO)
0, // input chn; // channel buffer to use: 0 - memory read, 1 - memory write
`PS_PIO_WAIT_COMPLETE );// wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
schedule_ps_pio ( // schedule software-control memory operation (may need to check FIFO status first)
READ_BLOCK_OFFSET, // input [9:0] seq_addr; // sequence start address
2, // input [1:0] page; // buffer page number
0, // input urgent; // high priority request (only for competion with other channels, wiil not pass in this FIFO)
0, // input chn; // channel buffer to use: 0 - memory read, 1 - memory write
`PS_PIO_WAIT_COMPLETE );// wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
schedule_ps_pio ( // schedule software-control memory operation (may need to check FIFO status first)
READ_BLOCK_OFFSET, // input [9:0] seq_addr; // sequence start address
1, // input [1:0] page; // buffer page number
0, // input urgent; // high priority request (only for competion with other channels, wiil not pass in this FIFO)
0, // input chn; // channel buffer to use: 0 - memory read, 1 - memory write
`PS_PIO_WAIT_COMPLETE );// wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
wait_ps_pio_done(DEFAULT_STATUS_MODE,1); // wait previous memory transaction finished before changing delays (effective immediately)
read_block_buf_chn (0, 3, 256, 1 ); // chn=0, page=3, number of 32-bit words=256, wait_done
end
endtask
// above - move to include
task test_afi_rw; // SuppressThisWarning VEditor - may be unused
input write_ddr3;
input [1:0] extra_pages;
input [21:0] frame_start_addr;
input [15:0] window_full_width; // 13 bit - in 8*16=128 bit bursts
input [15:0] window_width; // 13 bit - in 8*16=128 bit bursts
input [15:0] window_height; // 16 bit (only 14 are used here)
input [15:0] window_left;
input [15:0] window_top;
input [28:0] start64; // relative start address of the transfer (set to 0 when writing lo_addr64)
input [28:0] lo_addr64; // low address of the system memory range, in 64-bit words
input [28:0] size64; // size of the system memory range in 64-bit words
input continue; // 0 start from start64, 1 - continue from where it was
// -----------------------------------------
integer mode;
`ifdef MEMBRIDGE_DEBUG_READ
integer ii;
`endif
reg repetitive;
reg single;
reg reset_frame;
reg disable_need;
begin
disable_need = 1'b0;
repetitive = 1'b1;
single = 1'b0;
reset_frame = 1'b0;
$display("====== test_afi_rw: write=%d, extra_pages=%d, frame_start= %x, window_full_width=%d, window_width=%d, window_height=%d, window_left=%d, window_top=%d,@%t",
write_ddr3, extra_pages, frame_start_addr, window_full_width, window_width, window_height, window_left, window_top, $time);
$display("len64=%x, width64=%x, start64=%x, lo_addr64=%x, size64=%x,@%t",
((window_width[12:0]==0)? 15'h4000 : {1'b0,window_width[12:0],1'b0})*window_height[13:0],
(window_width[12:0]==0)? 29'h4000 : {15'b0,window_width[12:0],1'b0},
start64, lo_addr64, size64, $time);
mode= func_encode_mode_scanline(
disable_need,
repetitive,
single,
reset_frame,
extra_pages,
write_ddr3, // write_mem,
1, // enable
0); // chn_reset
write_contol_register(MCNTRL_SCANLINE_CHN1_ADDR + MCNTRL_SCANLINE_STARTADDR, {10'b0,frame_start_addr}); // RA=80, CA=0, BA=0 22-bit frame start address (3 CA LSBs==0. BA==0)
write_contol_register(MCNTRL_SCANLINE_CHN1_ADDR + MCNTRL_SCANLINE_FRAME_FULL_WIDTH, {16'h0, window_full_width});
write_contol_register(MCNTRL_SCANLINE_CHN1_ADDR + MCNTRL_SCANLINE_WINDOW_WH, {window_height,window_width}); //WINDOW_WIDTH + (WINDOW_HEIGHT<<16));
write_contol_register(MCNTRL_SCANLINE_CHN1_ADDR + MCNTRL_SCANLINE_WINDOW_X0Y0, {window_top,window_left}); //WINDOW_X0+ (WINDOW_Y0<<16));
write_contol_register(MCNTRL_SCANLINE_CHN1_ADDR + MCNTRL_SCANLINE_WINDOW_STARTXY, 0);
write_contol_register(MCNTRL_SCANLINE_CHN1_ADDR + MCNTRL_SCANLINE_MODE, mode);
configure_channel_priority(1,0); // lowest priority channel 3
enable_memcntrl_en_dis(1,1);
// write_contol_register(test_mode_address, TEST01_START_FRAME);
afi_setup(0);
membridge_setup(
((window_width[12:0]==0)? 15'h4000 : {1'b0,window_width[12:0],1'b0})*window_height[13:0], //len64,
(window_width[12:0]==0)? 29'h4000 : {15'b0,window_width[12:0],1'b0}, // width64,
start64,
lo_addr64,
size64);
membridge_start (continue);
`ifdef MEMBRIDGE_DEBUG_READ
// debugging
for (ii=0; ii < 10; ii=ii +1) begin
#200; //#50;
write_contol_register(MEMBRIDGE_ADDR + MEMBRIDGE_CTRL, {27'b0,continue,4'b1101}); // enable both address and data
end
#500;
write_contol_register(MEMBRIDGE_ADDR + MEMBRIDGE_CTRL, {26'b0,continue,5'b10001}); // disable debug (enable remaining xfers)
`endif
// just wait done
wait_status_condition ( // may also be read directly from the same bit of mctrl_linear_rw (address=5) status
MEMBRIDGE_STATUS_REG, // MCNTRL_TEST01_STATUS_REG_CHN3_ADDR,
MEMBRIDGE_ADDR + MEMBRIDGE_STATUS_CNTRL, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_STATUS_CNTRL,
DEFAULT_STATUS_MODE,
2 << STATUS_2LSB_SHFT, // bit 24 - busy, bit 25 - frame done
2 << STATUS_2LSB_SHFT, // mask for the 4-bit page number
0, // equal to
1); // do synchronize sequence number
end
endtask
task test_scanline_write; // SuppressThisWarning VEditor - may be unused
input [3:0] channel;
input [1:0] extra_pages;
input wait_done;
input [15:0] window_width; // 13 bit - in 8*16=128 bit bursts
input [15:0] window_height; // 16 bit
input [15:0] window_left;
input [15:0] window_top;
reg [29:0] start_addr;
integer mode;
reg [STATUS_DEPTH-1:0] status_address;
reg [29:0] status_control_address;
reg [29:0] test_mode_address;
integer ii;
integer xfer_size;
integer pages_per_row;
integer startx,starty; // temporary - because of the vdt bug with integer ports
reg repetitive;
reg single;
reg reset_frame;
reg disable_need;
begin
disable_need = 1'b0;
repetitive = 1'b1;
single = 1'b0;
reset_frame = 1'b0;
pages_per_row= (window_width>>NUM_XFER_BITS)+((window_width[NUM_XFER_BITS-1:0]==0)?0:1);
$display("====== test_scanline_write: channel=%d, extra_pages=%d, wait_done=%d @%t",
channel, extra_pages, wait_done, $time);
case (channel)
// 1: begin
// start_addr= MCNTRL_SCANLINE_CHN1_ADDR;
// status_address= MCNTRL_TEST01_STATUS_REG_CHN1_ADDR;
// status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_STATUS_CNTRL;
// test_mode_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_MODE;
// end
3: begin
start_addr= MCNTRL_SCANLINE_CHN3_ADDR;
status_address= MCNTRL_TEST01_STATUS_REG_CHN3_ADDR;
status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_STATUS_CNTRL;
test_mode_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_MODE;
end
default: begin
$display("**** ERROR: Invalid channel, only 3 is valid");
start_addr= MCNTRL_SCANLINE_CHN3_ADDR;
status_address= MCNTRL_TEST01_STATUS_REG_CHN1_ADDR;
status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_STATUS_CNTRL;
test_mode_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_MODE;
end
endcase
mode= func_encode_mode_scanline(
disable_need,
repetitive,
single,
reset_frame,
extra_pages,
1, // write_mem,
1, // enable
0); // chn_reset
write_contol_register(start_addr + MCNTRL_SCANLINE_STARTADDR, FRAME_START_ADDRESS); // RA=80, CA=0, BA=0 22-bit frame start address (3 CA LSBs==0. BA==0)
write_contol_register(start_addr + MCNTRL_SCANLINE_FRAME_FULL_WIDTH, FRAME_FULL_WIDTH);
write_contol_register(start_addr + MCNTRL_SCANLINE_WINDOW_WH, {window_height,window_width}); //WINDOW_WIDTH + (WINDOW_HEIGHT<<16));
write_contol_register(start_addr + MCNTRL_SCANLINE_WINDOW_X0Y0, {window_top,window_left}); //WINDOW_X0+ (WINDOW_Y0<<16));
write_contol_register(start_addr + MCNTRL_SCANLINE_WINDOW_STARTXY, SCANLINE_STARTX+(SCANLINE_STARTY<<16));
write_contol_register(start_addr + MCNTRL_SCANLINE_MODE, mode);
configure_channel_priority(channel,0); // lowest priority channel 3
// enable_memcntrl_channels(16'h000b); // channels 0,1,3 are enabled
enable_memcntrl_en_dis(channel,1);
write_contol_register(test_mode_address, TEST01_START_FRAME);
for (ii=0;ii<TEST_INITIAL_BURST;ii=ii+1) begin
// VDT bugs: 1:does not propagate undefined width through ?:, 2: - does not allow to connect it to task integer input, 3: shows integer input width as 1
xfer_size= ((pages_per_row>1)?
(
(
((ii % pages_per_row) < (pages_per_row-1))?
(1<<NUM_XFER_BITS):
(window_width % (1<<NUM_XFER_BITS))
)
):
({16'b0,window_width}));
$display("########### test_scanline_write block %d: channel=%d, @%t", ii, channel, $time);
startx=window_left + ((ii % pages_per_row)<<NUM_XFER_BITS);
starty=window_top + (ii / pages_per_row);
write_block_scanline_chn(
channel,
(ii & 3),
xfer_size,
startx, //window_left + ((ii % pages_per_row)<<NUM_XFER_BITS), // SCANLINE_CUR_X,
starty); // window_top + (ii / pages_per_row)); // SCANLINE_CUR_Y);\
end
for (ii=0;ii< (window_height * pages_per_row) ;ii = ii+1) begin // here assuming 1 page per line
if (ii >= TEST_INITIAL_BURST) begin // wait page ready and fill page after first 4 are filled
wait_status_condition (
status_address, //MCNTRL_TEST01_STATUS_REG_CHN3_ADDR,
status_control_address, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_STATUS_CNTRL,
DEFAULT_STATUS_MODE,
(ii-TEST_INITIAL_BURST)<<16, // 4-bit page number
'hf << 16, // mask for the 4-bit page number
1, // not equal to
(ii == TEST_INITIAL_BURST)); // synchronize sequence number - only first time, next just wait fro auto update
xfer_size= ((pages_per_row>1)?
(
(
((ii % pages_per_row) < (pages_per_row-1))?
(1<<NUM_XFER_BITS):
(window_width % (1<<NUM_XFER_BITS))
)
):
({16'b0,window_width}));
$display("########### test_scanline_write block %d: channel=%d, @%t", ii, channel, $time);
startx=window_left + ((ii % pages_per_row)<<NUM_XFER_BITS);
starty=window_top + (ii / pages_per_row);
write_block_scanline_chn(
channel,
(ii & 3),
xfer_size,
startx, // window_left + ((ii % pages_per_row)<<NUM_XFER_BITS), // SCANLINE_CUR_X,
starty); // window_top + (ii / pages_per_row)); // SCANLINE_CUR_Y);
end
write_contol_register(test_mode_address, TEST01_NEXT_PAGE);
end
if (wait_done) begin
wait_status_condition ( // may also be read directly from the same bit of mctrl_linear_rw (address=5) status
status_address, // MCNTRL_TEST01_STATUS_REG_CHN3_ADDR,
status_control_address, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_STATUS_CNTRL,
DEFAULT_STATUS_MODE,
2 << STATUS_2LSB_SHFT, // bit 24 - busy, bit 25 - frame done
2 << STATUS_2LSB_SHFT, // mask for the 4-bit page number
0, // equal to
0); // no need to synchronize sequence number
// enable_memcntrl_en_dis(channel,0); // disable channel
end
end
endtask
task test_scanline_read; // SuppressThisWarning VEditor - may be unused
input [3:0] channel;
input [1:0] extra_pages;
input show_data;
input [15:0] window_width;
input [15:0] window_height;
input [15:0] window_left;
input [15:0] window_top;
reg [29:0] start_addr;
integer mode;
reg [STATUS_DEPTH-1:0] status_address;
reg [29:0] status_control_address;
reg [29:0] test_mode_address;
integer ii;
integer xfer_size;
integer pages_per_row;
reg repetitive;
reg single;
reg reset_frame;
reg disable_need;
begin
disable_need = 1'b0;
repetitive = 1'b1;
single = 1'b0;
reset_frame = 1'b0;
pages_per_row= (window_width>>NUM_XFER_BITS)+((window_width[NUM_XFER_BITS-1:0]==0)?0:1);
$display("====== test_scanline_read: channel=%d, extra_pages=%d, show_data=%d @%t",
channel, extra_pages, show_data, $time);
case (channel)
// 1: begin
// start_addr= MCNTRL_SCANLINE_CHN1_ADDR;
// status_address= MCNTRL_TEST01_STATUS_REG_CHN1_ADDR;
// status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_STATUS_CNTRL;
// test_mode_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_MODE;
// end
3: begin
start_addr= MCNTRL_SCANLINE_CHN3_ADDR;
status_address= MCNTRL_TEST01_STATUS_REG_CHN3_ADDR;
status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_STATUS_CNTRL;
test_mode_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_MODE;
end
default: begin
$display("**** ERROR: Invalid channel, only 3 is valid");
start_addr= MCNTRL_SCANLINE_CHN3_ADDR;
status_address= MCNTRL_TEST01_STATUS_REG_CHN1_ADDR;
status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_STATUS_CNTRL;
test_mode_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN1_MODE;
end
endcase
mode= func_encode_mode_scanline(
disable_need,
repetitive,
single,
reset_frame,
extra_pages,
0, // write_mem,
1, // enable
0); // chn_reset
// program to the
write_contol_register(start_addr + MCNTRL_SCANLINE_STARTADDR, FRAME_START_ADDRESS); // RA=80, CA=0, BA=0 22-bit frame start address (3 CA LSBs==0. BA==0)
write_contol_register(start_addr + MCNTRL_SCANLINE_FRAME_FULL_WIDTH, FRAME_FULL_WIDTH);
write_contol_register(start_addr + MCNTRL_SCANLINE_WINDOW_WH, {window_height,window_width}); //WINDOW_WIDTH + (WINDOW_HEIGHT<<16));
write_contol_register(start_addr + MCNTRL_SCANLINE_WINDOW_X0Y0, {window_top,window_left}); //WINDOW_X0+ (WINDOW_Y0<<16));
write_contol_register(start_addr + MCNTRL_SCANLINE_WINDOW_STARTXY, SCANLINE_STARTX+(SCANLINE_STARTY<<16));
write_contol_register(start_addr + MCNTRL_SCANLINE_MODE, mode);// set mode register: {extra_pages[1:0],enable,!reset}
configure_channel_priority(channel,0); // lowest priority channel 3
enable_memcntrl_en_dis(channel,1);
write_contol_register(test_mode_address, TEST01_START_FRAME);
for (ii=0;ii<(window_height * pages_per_row);ii = ii+1) begin
xfer_size= ((pages_per_row>1)?
(
(
((ii % pages_per_row) < (pages_per_row-1))?
(1<<NUM_XFER_BITS):
(window_width % (1<<NUM_XFER_BITS))
)
):
({16'b0,window_width}));
wait_status_condition (
status_address, //MCNTRL_TEST01_STATUS_REG_CHN2_ADDR,
status_control_address, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_STATUS_CNTRL,
DEFAULT_STATUS_MODE,
(ii) << 16, // -TEST_INITIAL_BURST)<<16, // 4-bit page number
'hf << 16, // mask for the 4-bit page number
1, // not equal to
(ii == 0)); // synchronize sequence number - only first time, next just wait fro auto update
// read block (if needed), for now just sikip
if (show_data) begin
$display("########### test_scanline_read block %d: channel=%d, @%t", ii, channel, $time);
read_block_buf_chn (
channel,
(ii & 3),
xfer_size <<2,
1 ); // chn=0, page=3, number of 32-bit words=256, wait_done
end
write_contol_register(test_mode_address, TEST01_NEXT_PAGE);
end
end
endtask
task test_tiled_write; // SuppressThisWarning VEditor - may be unused
input [3:0] channel;
input byte32;
input keep_open;
input [1:0] extra_pages;
input wait_done;
input [15:0] window_width;
input [15:0] window_height;
input [15:0] window_left;
input [15:0] window_top;
input [ 7:0] tile_width;
input [ 7:0] tile_height;
input [ 7:0] tile_vstep;
reg [29:0] start_addr;
integer mode;
reg [STATUS_DEPTH-1:0] status_address;
reg [29:0] status_control_address;
reg [29:0] test_mode_address;
integer ii;
integer tiles_per_row;
integer tile_rows_per_window;
integer tile_size;
integer startx,starty; // temporary - because of the vdt bug with integer ports
reg repetitive;
reg single;
reg reset_frame;
reg disable_need;
begin
disable_need = 1'b0;
repetitive = 1'b1;
single = 1'b0;
reset_frame = 1'b0;
tiles_per_row= (window_width/tile_width)+ ((window_width % tile_width==0)?0:1);
tile_rows_per_window= ((window_height-1)/tile_vstep) + 1;
tile_size= tile_width*tile_height;
$display("====== test_tiled_write: channel=%d, byte32=%d, keep_open=%d, extra_pages=%d, wait_done=%d @%t",
channel, byte32, keep_open, extra_pages, wait_done, $time);
case (channel)
2: begin
start_addr= MCNTRL_TILED_CHN2_ADDR;
status_address= MCNTRL_TEST01_STATUS_REG_CHN2_ADDR;
status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_STATUS_CNTRL;
test_mode_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_MODE;
end
4: begin
start_addr= MCNTRL_TILED_CHN4_ADDR;
status_address= MCNTRL_TEST01_STATUS_REG_CHN4_ADDR;
status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN4_STATUS_CNTRL;
test_mode_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN4_MODE;
end
default: begin
$display("**** ERROR: Invalid channel, only 2 and 4 are valid");
start_addr= MCNTRL_TILED_CHN2_ADDR;
status_address= MCNTRL_TEST01_STATUS_REG_CHN2_ADDR;
status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_STATUS_CNTRL;
test_mode_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_MODE;
end
endcase
mode= func_encode_mode_tiled(
disable_need,
repetitive,
single,
reset_frame,
byte32,
keep_open,
extra_pages,
1, // write_mem,
1, // enable
0); // chn_reset
write_contol_register(start_addr + MCNTRL_TILED_STARTADDR, FRAME_START_ADDRESS); // RA=80, CA=0, BA=0 22-bit frame start address (3 CA LSBs==0. BA==0)
write_contol_register(start_addr + MCNTRL_TILED_FRAME_FULL_WIDTH, FRAME_FULL_WIDTH);
write_contol_register(start_addr + MCNTRL_TILED_WINDOW_WH, {window_height,window_width}); //WINDOW_WIDTH + (WINDOW_HEIGHT<<16));
write_contol_register(start_addr + MCNTRL_TILED_WINDOW_X0Y0, {window_top,window_left}); //WINDOW_X0+ (WINDOW_Y0<<16));
write_contol_register(start_addr + MCNTRL_TILED_WINDOW_STARTXY, TILED_STARTX+(TILED_STARTY<<16));
write_contol_register(start_addr + MCNTRL_TILED_TILE_WHS, {8'b0,tile_vstep,tile_height,tile_width});//tile_width+(tile_height<<8)+(tile_vstep<<16));
write_contol_register(start_addr + MCNTRL_TILED_MODE, mode);// set mode register: {extra_pages[1:0],enable,!reset}
configure_channel_priority(channel,0); // lowest priority channel 3
enable_memcntrl_en_dis(channel,1);
write_contol_register(test_mode_address, TEST01_START_FRAME);
for (ii=0;ii<TEST_INITIAL_BURST;ii=ii+1) begin
$display("########### test_tiled_write block %d: channel=%d, @%t", ii, channel, $time);
startx = window_left + ((ii % tiles_per_row) * tile_width);
starty = window_top + (ii / tile_rows_per_window); // SCANLINE_CUR_Y);\
write_block_scanline_chn( // TODO: Make a different tile buffer data, matching the order
channel, // channel
(ii & 3),
tile_size,
startx, //window_left + ((ii % tiles_per_row) * tile_width),
starty); //window_top + (ii / tile_rows_per_window)); // SCANLINE_CUR_Y);\
end
for (ii=0;ii<(tiles_per_row * tile_rows_per_window);ii = ii+1) begin
if (ii >= TEST_INITIAL_BURST) begin // wait page ready and fill page after first 4 are filled
wait_status_condition (
status_address, // MCNTRL_TEST01_STATUS_REG_CHN5_ADDR,
status_control_address, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN5_STATUS_CNTRL,
DEFAULT_STATUS_MODE,
(ii-TEST_INITIAL_BURST)<<16, // 4-bit page number
'hf << 16, // mask for the 4-bit page number
1, // not equal to
(ii == TEST_INITIAL_BURST)); // synchronize sequence number - only first time, next just wait fro auto update
$display("########### test_tiled_write block %d: channel=%d, @%t", ii, channel, $time);
startx = window_left + ((ii % tiles_per_row) * tile_width);
starty = window_top + (ii / tile_rows_per_window);
write_block_scanline_chn( // TODO: Make a different tile buffer data, matching the order
channel, // channel
(ii & 3),
tile_size,
startx, // window_left + ((ii % tiles_per_row) * tile_width),
starty); // window_top + (ii / tile_rows_per_window)); // SCANLINE_CUR_Y);\
end
write_contol_register(test_mode_address, TEST01_NEXT_PAGE);
end
if (wait_done) begin
wait_status_condition ( // may also be read directly from the same bit of mctrl_linear_rw (address=5) status
status_address, // MCNTRL_TEST01_STATUS_REG_CHN3_ADDR,
status_control_address, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN3_STATUS_CNTRL,
DEFAULT_STATUS_MODE,
2 << STATUS_2LSB_SHFT, // bit 24 - busy, bit 25 - frame done
2 << STATUS_2LSB_SHFT, // mask for the 4-bit page number
0, // equal to
0); // no need to synchronize sequence number
// enable_memcntrl_en_dis(channel,0); // disable channel
end
end
endtask
task test_tiled_read; // SuppressThisWarning VEditor - may be unused
input [3:0] channel;
input byte32;
input keep_open;
input [1:0] extra_pages;
input show_data;
input [15:0] window_width;
input [15:0] window_height;
input [15:0] window_left;
input [15:0] window_top;
input [ 7:0] tile_width;
input [ 7:0] tile_height;
input [ 7:0] tile_vstep;
reg [29:0] start_addr;
integer mode;
reg [STATUS_DEPTH-1:0] status_address;
reg [29:0] status_control_address;
reg [29:0] test_mode_address;
integer ii;
integer tiles_per_row;
integer tile_rows_per_window;
integer tile_size;
reg repetitive;
reg single;
reg reset_frame;
reg disable_need;
begin
disable_need = 1'b0;
repetitive = 1'b1;
single = 1'b0;
reset_frame = 1'b0;
tiles_per_row= (window_width/tile_width)+ ((window_width % tile_width==0)?0:1);
tile_rows_per_window= ((window_height-1)/tile_vstep) + 1;
tile_size= tile_width*tile_height;
$display("====== test_tiled_read: channel=%d, byte32=%d, keep_open=%d, extra_pages=%d, show_data=%d @%t",
channel, byte32, keep_open, extra_pages, show_data, $time);
case (channel)
2: begin
start_addr= MCNTRL_TILED_CHN2_ADDR;
status_address= MCNTRL_TEST01_STATUS_REG_CHN2_ADDR;
status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_STATUS_CNTRL;
test_mode_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_MODE;
end
4: begin
start_addr= MCNTRL_TILED_CHN4_ADDR;
status_address= MCNTRL_TEST01_STATUS_REG_CHN4_ADDR;
status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN4_STATUS_CNTRL;
test_mode_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN4_MODE;
end
default: begin
$display("**** ERROR: Invalid channel, only 2 and 4 are valid");
start_addr= MCNTRL_TILED_CHN2_ADDR;
status_address= MCNTRL_TEST01_STATUS_REG_CHN2_ADDR;
status_control_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_STATUS_CNTRL;
test_mode_address= MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN2_MODE;
end
endcase
mode= func_encode_mode_tiled(
disable_need,
repetitive,
single,
reset_frame,
byte32,
keep_open,
extra_pages,
0, // write_mem,
1, // enable
0); // chn_reset
write_contol_register(start_addr + MCNTRL_TILED_STARTADDR, FRAME_START_ADDRESS); // RA=80, CA=0, BA=0 22-bit frame start address (3 CA LSBs==0. BA==0)
write_contol_register(start_addr + MCNTRL_TILED_FRAME_FULL_WIDTH, FRAME_FULL_WIDTH);
write_contol_register(start_addr + MCNTRL_TILED_WINDOW_WH, {window_height,window_width}); //WINDOW_WIDTH + (WINDOW_HEIGHT<<16));
write_contol_register(start_addr + MCNTRL_TILED_WINDOW_X0Y0, {window_top,window_left}); //WINDOW_X0+ (WINDOW_Y0<<16));
write_contol_register(start_addr + MCNTRL_TILED_WINDOW_STARTXY, TILED_STARTX+(TILED_STARTY<<16));
write_contol_register(start_addr + MCNTRL_TILED_TILE_WHS, {8'b0,tile_vstep,tile_height,tile_width});//(tile_height<<8)+(tile_vstep<<16));
write_contol_register(start_addr + MCNTRL_TILED_MODE, mode);// set mode register: {extra_pages[1:0],enable,!reset}
configure_channel_priority(channel,0); // lowest priority channel 3
enable_memcntrl_en_dis(channel,1);
write_contol_register(test_mode_address, TEST01_START_FRAME);
for (ii=0;ii<(tiles_per_row * tile_rows_per_window);ii = ii+1) begin
wait_status_condition (
status_address, // MCNTRL_TEST01_STATUS_REG_CHN4_ADDR,
status_control_address, // MCNTRL_TEST01_ADDR + MCNTRL_TEST01_CHN4_STATUS_CNTRL,
DEFAULT_STATUS_MODE,
ii << 16, // -TEST_INITIAL_BURST)<<16, // 4-bit page number
'hf << 16, // mask for the 4-bit page number
1, // not equal to
(ii == 0)); // synchronize sequence number - only first time, next just wait fro auto update
if (show_data) begin
$display("########### test_tiled_read block %d: channel=%d, @%t", ii, channel, $time);
read_block_buf_chn (
channel,
(ii & 3),
tile_size <<2,
1 ); // chn=0, page=3, number of 32-bit words=256, wait_done
end
write_contol_register(test_mode_address, TEST01_NEXT_PAGE);
end
// enable_memcntrl_en_dis(channel,0); // disable channel
end
endtask
includes/x393_cur_params_target.vh 0 → 100644
View file @ e4816b14
/*******************************************************************************
* File: x393_cur_params_target.vh
* Date:2015-02-07
* Author: Andrey Filippov
* Description: Memory controller parameters that need adjustment during training
* Target ,pde
* Copyright (c) 2015 Elphel, Inc.
* x393_cur_params_target.vh is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* x393_cur_params_target.vh is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
localparam DLY_LANE0_ODELAY = 80'hd85c1014141814181218;
localparam DLY_LANE0_IDELAY = 72'h2c7a8380897c807b88;
localparam DLY_LANE1_ODELAY = 80'hd8581812181418181814;
localparam DLY_LANE1_IDELAY = 72'h108078807a887c8280;
localparam DLY_CMDA = 256'hd3d3d3d4dcd1d8cc494949494949494949d4d3ccd3d3dbd4ccd4d2d3d1d2d8cc;
localparam DLY_PHASE = 8'h33;
// localparam DFLT_WBUF_DELAY = 4'h9;
\ No newline at end of file
includes/x393_localparams.vh 0 → 100644
View file @ e4816b14
/*******************************************************************************
* File: x393_localparams.vh
* Date:2015-02-07
* Author: Andrey Filippov
* Description: Local parameters for simulation of the x393
*
* Copyright (c) 2015 Elphel, Inc.
* x393_localparams.vh is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* x393_localparams.vh is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
// S uppressWarnings VEditor
localparam [1:0] DEFAULT_STATUS_MODE = 3; // auto status on change, increase sequence number
localparam LD_DLY_LANE0_ODELAY = DLY_LD+'h00; // 0x1080
localparam LD_DLY_LANE0_IDELAY = DLY_LD+'h10; // 0x1090
localparam LD_DLY_LANE1_ODELAY = DLY_LD+'h20; // 0x10a0
localparam LD_DLY_LANE1_IDELAY = DLY_LD+'h30; // 0x10b0
localparam LD_DLY_CMDA = DLY_LD+'h40; // 0x10c0
localparam LD_DLY_PHASE = DLY_LD+'h60; // 0x10e0
localparam DLY_SET = MCONTR_PHY_0BIT_ADDR + MCONTR_PHY_0BIT_DLY_SET; //0x1020
// different sets of settings for the functional simulation and the actual hardware - should not be needed anymore
localparam T_RFC=50; // t_rfc=50 for tCK=2.5ns
localparam T_REFI=48; // t_refi; # 48/97 for normal, 8 - for simulation (7.8us <85C, 3.9us >85C)
// alternative to set same type delays to the same value
localparam DLY_DQ_IDELAY = ( (DLY_LANE0_IDELAY & 8'hff)+
((DLY_LANE0_IDELAY>> 8) & 8'hff)+
((DLY_LANE0_IDELAY>>16) & 8'hff)+
((DLY_LANE0_IDELAY>>24) & 8'hff)+
((DLY_LANE0_IDELAY>>32) & 8'hff)+
((DLY_LANE0_IDELAY>>40) & 8'hff)+
((DLY_LANE0_IDELAY>>48) & 8'hff)+
((DLY_LANE0_IDELAY>>56) & 8'hff)+
(DLY_LANE1_IDELAY & 8'hff)+
((DLY_LANE1_IDELAY>> 8) & 8'hff)+
((DLY_LANE1_IDELAY>>16) & 8'hff)+
((DLY_LANE1_IDELAY>>24) & 8'hff)+
((DLY_LANE1_IDELAY>>32) & 8'hff)+
((DLY_LANE1_IDELAY>>40) & 8'hff)+
((DLY_LANE1_IDELAY>>48) & 8'hff)+
((DLY_LANE1_IDELAY>>56) & 8'hff)+ 8 ) >> 4;
localparam DLY_DQ_ODELAY = (((DLY_LANE0_ODELAY & 8'hff)+
((DLY_LANE0_ODELAY>> 8) & 8'hff)+
((DLY_LANE0_ODELAY>>16) & 8'hff)+
((DLY_LANE0_ODELAY>>24) & 8'hff)+
((DLY_LANE0_ODELAY>>32) & 8'hff)+
((DLY_LANE0_ODELAY>>40) & 8'hff)+
((DLY_LANE0_ODELAY>>48) & 8'hff)+
((DLY_LANE0_ODELAY>>56) & 8'hff)+
(DLY_LANE1_ODELAY & 8'hff)+
((DLY_LANE1_ODELAY>> 8) & 8'hff)+
((DLY_LANE1_ODELAY>>16) & 8'hff)+
((DLY_LANE1_ODELAY>>24) & 8'hff)+
((DLY_LANE1_ODELAY>>32) & 8'hff)+
((DLY_LANE1_ODELAY>>40) & 8'hff)+
((DLY_LANE1_ODELAY>>48) & 8'hff)+
((DLY_LANE1_ODELAY>>56) & 8'hff)+ 8 ) >> 4);
localparam DLY_DQS_IDELAY = (((DLY_LANE0_IDELAY>>64) & 8'hff)+
((DLY_LANE1_IDELAY>>64) & 8'hff)+ 1 ) >> 1;
localparam DLY_DQS_ODELAY = (((DLY_LANE0_ODELAY>>64) & 8'hff)+
((DLY_LANE1_ODELAY>>64) & 8'hff)+ 1 ) >> 1;
localparam DLY_DM_ODELAY = DLY_DQ_ODELAY;
localparam DLY_CMDA_ODELAY =(((DLY_CMDA>> 0) & 8'hff)+
((DLY_CMDA>> 8) & 8'hff)+
((DLY_CMDA>>'h10) & 8'hff)+
((DLY_CMDA>>'h18) & 8'hff)+
((DLY_CMDA>>'h20) & 8'hff)+
((DLY_CMDA>>'h28) & 8'hff)+
((DLY_CMDA>>'h30) & 8'hff)+
((DLY_CMDA>>'h38) & 8'hff)+
((DLY_CMDA>>'h40) & 8'hff)+
((DLY_CMDA>>'h48) & 8'hff)+
((DLY_CMDA>>'h50) & 8'hff)+
((DLY_CMDA>>'h58) & 8'hff)+
((DLY_CMDA>>'h60) & 8'hff)+
((DLY_CMDA>>'h68) & 8'hff)+
((DLY_CMDA>>'h70) & 8'hff)+
((DLY_CMDA>>'hc0) & 8'hff)+
((DLY_CMDA>>'hc8) & 8'hff)+
((DLY_CMDA>>'hd0) & 8'hff)+
((DLY_CMDA>>'hd8) & 8'hff)+
((DLY_CMDA>>'he0) & 8'hff)+
((DLY_CMDA>>'he8) & 8'hff)+
((DLY_CMDA>>'hf0) & 8'hff)+
((DLY_CMDA>>'hf8) & 8'hff)+ 12 ) / 23;
localparam DLY_LANE0_DQS_WLV_IDELAY = DLY_DQS_IDELAY; // b0; // idelay dqs
localparam DLY_LANE1_DQS_WLV_IDELAY = DLY_DQS_IDELAY; // b0; idelay dqs
localparam DQSTRI_FIRST= 4'h1; // 3; // DQS tri-state control word, first when enabling output
localparam DQSTRI_LAST= 4'hc; // DQS tri-state control word, first after disabling output
localparam DQTRI_FIRST= 4'h3; // 7; // DQ tri-state control word, first when enabling output
localparam DQTRI_LAST= 4'he; // DQ tri-state control word, first after disabling output
localparam WBUF_DLY_DFLT= DFLT_WBUF_DELAY; // 4'h8; // 4'h6; // extra delay (in mclk cycles) to add to write buffer enable (DDR3 read data)
localparam WBUF_DLY_WLV= DFLT_WBUF_DELAY; // 4'h7; // write leveling mode: extra delay (in mclk cycles) to add to write buffer enable (DDR3 read data)
localparam INITIALIZE_OFFSET= 'h00; // moemory initialization start address (in words) ..`h0c
localparam REFRESH_OFFSET= 'h10; // refresh start address (in words) ..`h13
localparam WRITELEV_OFFSET= 'h20; // write leveling start address (in words) ..`h2a
localparam READ_PATTERN_OFFSET='h40; // read pattern to memory block sequence start address (in words) ..'h053 with 8x2*64 bits (variable)
localparam WRITE_BLOCK_OFFSET= 'h100; // write block sequence start address (in words) ..'h14c
localparam READ_BLOCK_OFFSET= 'h180; // read block sequence start address (in words)
localparam STATUS_SEQ_SHFT= 26; // bits [31:26] is the sequence number
localparam STATUS_2LSB_SHFT= 24; // bits [25:24] get the 2 LSB of the status (transmitted with the sequence number in the second byte)
localparam STATUS_MSB_RSHFT= 2; // status bits [25:2] are read through [23:0]
localparam STATUS_PSHIFTER_RDY_MASK = 1<<STATUS_2LSB_SHFT;
localparam FRAME_START_ADDRESS= 'h1000; // RA=80, CA=0, BA=0 22-bit frame start address (3 CA LSBs==0. BA==0)
localparam FRAME_START_ADDRESS_INC= 'h800;
localparam LAST_BUF_FRAME = 1;
localparam CAMSYNC_DELAY = 200;
localparam FRAME_FULL_WIDTH= 'h0c0; // Padded line length (8-row increment), in 8-bursts (16 bytes)
// localparam AFI_LO_ADDR64= 'h4000; // start of the system memory range in 64-bit words
// localparam AFI_SIZE64= 'h4000; // size of system memory range in 64-bit words
// Same as in the actual hardware
localparam AFI_LO_ADDR64= 'h4f20000; // start of the system memory range in 64-bit words
localparam AFI_SIZE64= 'h0c80000; // size of system memory range in 64-bit words
// localparam SCANLINE_WINDOW_WH= `h079000a2; // 2592*1936: low word - 13-bit window width (0->'h4000), high word - 16-bit frame height (0->'h10000)
// localparam SCANLINE_WINDOW_WH= 'h0009000b; // 176*9: low word - 13-bit window width (0->'h4000), high word - 16-bit frame height (0->'h10000)
localparam WINDOW_WIDTH= 'h000b; //'h005b; //'h000b; // 176: 13-bit window width (0->'h4000)
localparam WINDOW_HEIGHT= 'h000a; // 9: 16-bit window height (0->'h10000)
// localparam SCANLINE_X0Y0= 'h00050003; // X0=3*16=48, Y0=5: // low word - 13-bit window left, high word - 16-bit window top
localparam WINDOW_X0= 'h5c; //'h7f; // 'h005c; // 'h7c; // 'h0003; // X0=3*16=48 - 13-bit window left
localparam WINDOW_Y0= 'h0005; // Y0=5: 16-bit window top
// localparam SCANLINE_STARTXY= 'h0; // low word - 13-bit start X (relative to window), high word - 16-bit start y (normally 0)
localparam SCANLINE_STARTX= 'h0; // 13-bit start X (relative to window), high word (normally 0)
localparam SCANLINE_STARTY= 'h0; // 16-bit start y (normally 0)
localparam [1:0] SCANLINE_EXTRA_PAGES= 0; // 0..2 - number of pages in the buffer to keep/not write // SuppressThisWarning VEditor - not used
localparam TILED_STARTX= 'h0; // 13-bit start X (relative to window), high word (normally 0)
localparam TILED_STARTY= 'h0; // 16-bit start y (normally 0)
localparam [1:0] TILED_EXTRA_PAGES= 0; // 0..2 - number of pages in the buffer to keep/not write
localparam TILED_KEEP_OPEN= 1'b1; //1'b1; // 1'b0; // Do not close banks between reads (valid only for tiles <=8 rows, needed if less than 3? rows)
localparam TILE_WIDTH= 'h04; // 6-bit tile width (1..'h40)
localparam TILE_HEIGHT= 'h08; //'h05; // 'h04; //'h06; // 6-bit tile height (1..'h40) // 4 - violation
localparam TILE_VSTEP= 'h04; // 6-bit tile vertical step, with no overlap it is equal to TILE_HEIGHT (1..'h40)
localparam TEST01_START_FRAME= 1;
localparam TEST01_NEXT_PAGE= 2;
localparam TEST01_SUSPEND= 4; // SuppressThisWarning VEditor - not used
localparam TEST_INITIAL_BURST= 4; // 3;
\ No newline at end of file
includes/x393_mcontr_encode_cmd.vh 0 → 100644
View file @ e4816b14
/*******************************************************************************
* File: x393_mcontr_encode_cmd.vh
* Date:2015-02-09
* Author: Andrey Filippov
* Description: Functions used to encode memory controller sequences
*
* Copyright (c) 2015 Elphel, Inc.
* x393_mcontr_encode_cmd.vh is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* x393_mcontr_encode_cmd.vh is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
function [31:0] func_encode_skip;
input [CMD_PAUSE_BITS-1:0] skip; // number of extra cycles to skip (and keep all the other outputs)
input done; // end of sequence
input [2:0] bank; // bank (here OK to be any)
input odt_en; // enable ODT
input cke; // disable CKE
input sel; // first/second half-cycle, other will be nop (cke+odt applicable to both)
input dq_en; // enable (not tristate) DQ lines (internal timing sequencer for 0->1 and 1->0)
input dqs_en; // enable (not tristate) DQS lines (internal timing sequencer for 0->1 and 1->0)
input dqs_toggle; // enable toggle DQS according to the pattern
input dci; // DCI disable, both DQ and DQS lines (internal logic and timing sequencer for 0->1 and 1->0)
input buf_wr; // connect to external buffer (but only if not paused)
input buf_rd; // connect to external buffer (but only if not paused)
input buf_rst; // connect to external buffer (but only if not paused)
begin
func_encode_skip= func_encode_cmd (
{{14-CMD_DONE_BIT{1'b0}}, done, skip[CMD_PAUSE_BITS-1:0]}, // 15-bit row/column address
bank[2:0], // bank (here OK to be any)
3'b0, // RAS/CAS/WE, positive logic
odt_en, // enable ODT
cke, // disable CKE
sel, // first/second half-cycle, other will be nop (cke+odt applicable to both)
dq_en, // enable (not tristate) DQ lines (internal timing sequencer for 0->1 and 1->0)
dqs_en, // enable (not tristate) DQS lines (internal timing sequencer for 0->1 and 1->0)
dqs_toggle, // enable toggle DQS according to the pattern
dci, // DCI disable, both DQ and DQS lines (internal logic and timing sequencer for 0->1 and 1->0)
buf_wr, // connect to external buffer (but only if not paused)
buf_rd, // connect to external buffer (but only if not paused)
1'b0, // nop
buf_rst);
end
endfunction
function [31:0] func_encode_cmd;
input [14:0] addr; // 15-bit row/column address
input [2:0] bank; // bank (here OK to be any)
input [2:0] rcw; // RAS/CAS/WE, positive logic
input odt_en; // enable ODT
input cke; // disable CKE
input sel; // first/second half-cycle, other will be nop (cke+odt applicable to both)
input dq_en; // enable (not tristate) DQ lines (internal timing sequencer for 0->1 and 1->0)
input dqs_en; // enable (not tristate) DQS lines (internal timing sequencer for 0->1 and 1->0)
input dqs_toggle; // enable toggle DQS according to the pattern
input dci; // DCI disable, both DQ and DQS lines (internal logic and timing sequencer for 0->1 and 1->0)
input buf_wr; // connect to external buffer (but only if not paused)
input buf_rd; // connect to external buffer (but only if not paused)
input nop; // add NOP after the current command, keep other data
input buf_rst; // connect to external buffer (but only if not paused)
begin
func_encode_cmd={
addr[14:0], // 15-bit row/column address
bank [2:0], // bank
rcw[2:0], // RAS/CAS/WE
odt_en, // enable ODT
cke, // may be optimized (removed from here)?
sel, // first/second half-cycle, other will be nop (cke+odt applicable to both)
dq_en, // enable (not tristate) DQ lines (internal timing sequencer for 0->1 and 1->0)
dqs_en, // enable (not tristate) DQS lines (internal timing sequencer for 0->1 and 1->0)
dqs_toggle, // enable toggle DQS according to the pattern
dci, // DCI disable, both DQ and DQS lines (internal logic and timing sequencer for 0->1 and 1->0)
buf_wr, // phy_buf_wr, // connect to external buffer (but only if not paused)
buf_rd, // phy_buf_rd, // connect to external buffer (but only if not paused)
nop, // add NOP after the current command, keep other data
buf_rst // Reserved for future use
};
end
endfunction
includes/x393_parameters.vh 0 → 100644
View file @ e4816b14
/*******************************************************************************
* File: x393_parameters.vh
* Date:2015-02-07
* Author: Andrey Filippov
* Description: Parameters for the x393 (simulation and implementation)
*
* Copyright (c) 2015 Elphel, Inc.
* x393_parameters.vh is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* x393_parameters.vh is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
parameter MCONTR_WR_MASK = 'h3c00, // AXI write address mask for the 1Kx32 buffers command sequence memory
parameter MCONTR_RD_MASK = 'h3c00, // AXI read address mask to generate busy
parameter CONTROL_ADDR = 'h0000, // AXI write address of control write registers
parameter CONTROL_ADDR_MASK = 'h3800, // AXI write mask of control registers
parameter CONTROL_RBACK_ADDR = 'h0000, // AXI read address of control registers readback
parameter CONTROL_RBACK_ADDR_MASK = 'h3800, // AXI mask of control registers readback addresses
parameter CONTROL_RBACK_DEPTH= 11, // 10 - 1xbram, 11 - 2xbram
parameter STATUS_ADDR = 'h0800, // AXI read address of status read registers
parameter STATUS_ADDR_MASK = 'h3c00, // AXI write address of status registers
parameter MCONTR_CMD_WR_ADDR = 'h0c00, // AXI write to command sequence memory
parameter MCONTR_BUF0_RD_ADDR = 'h1000, // AXI read address from buffer 0 (PS sequence, memory read) (was 'h400)
parameter MCONTR_BUF0_WR_ADDR = 'h1000, // AXI write address to buffer 0 (PS sequence, memory write) (was 'h400)
// MCONTR_BUF[2-4]_* - temporary, will be removed in the futire
parameter MCONTR_BUF2_RD_ADDR = 'h1400, // AXI read address from buffer 2 (PL sequence, tiles, memory read)
parameter MCONTR_BUF2_WR_ADDR = 'h1400, // AXI write address to buffer 2 (PL sequence, tiles, memory write)
parameter MCONTR_BUF3_RD_ADDR = 'h1800, // AXI read address from buffer 3 (PL sequence, scanline, memory read)
parameter MCONTR_BUF3_WR_ADDR = 'h1800, // AXI write address to buffer 3 (PL sequence, scanline, memory write)
parameter MCONTR_BUF4_RD_ADDR = 'h1c00, // AXI read address from buffer 4 (PL sequence, tiles, memory read)
parameter MCONTR_BUF4_WR_ADDR = 'h1c00, // AXI write address to buffer 4 (PL sequence, tiles, memory write)
parameter AXI_WR_ADDR_BITS = 14,
parameter AXI_RD_ADDR_BITS = 14,
parameter STATUS_DEPTH= 8, // 256 cells, maybe just 16..64 are enough?
//command interface parameters
parameter DLY_LD = 'h080, // address to generate delay load
parameter DLY_LD_MASK = 'h780, // address mask to generate delay load
//0x1000..103f - 0- bit data (set/reset)
parameter MCONTR_PHY_0BIT_ADDR = 'h020, // address to set sequnecer channel and run (4 LSB-s - channel)
parameter MCONTR_PHY_0BIT_ADDR_MASK = 'h7f0, // address mask to generate sequencer channel/run
// 0x1020 - DLY_SET // 0 bits -set pre-programmed delays
// 0x1024..1025 - CMDA_EN // 0 bits - enable/disable command/address outputs
// 0x1026..1027 - SDRST_ACT // 0 bits - enable/disable active-low reset signal to DDR3 memory
// 0x1028..1029 - CKE_EN // 0 bits - enable/disable CKE signal to memory
// 0x102a..102b - DCI_RST // 0 bits - enable/disable CKE signal to memory
// 0x102c..102d - DLY_RST // 0 bits - enable/disable CKE signal to memory
parameter MCONTR_PHY_0BIT_DLY_SET = 'h0, // set pre-programmed delays
parameter MCONTR_PHY_0BIT_CMDA_EN = 'h4, // enable/disable command/address outputs
parameter MCONTR_PHY_0BIT_SDRST_ACT = 'h6, // enable/disable active-low reset signal to DDR3 memory
parameter MCONTR_PHY_0BIT_CKE_EN = 'h8, // enable/disable CKE signal to memory
parameter MCONTR_PHY_0BIT_DCI_RST = 'ha, // enable/disable CKE signal to memory
parameter MCONTR_PHY_0BIT_DLY_RST = 'hc, // enable/disable CKE signal to memory
//0x1030..1037 - 0-bit memory cotroller (set/reset)
parameter MCONTR_TOP_0BIT_ADDR = 'h030, // address to turn on/off memory controller features
parameter MCONTR_TOP_0BIT_ADDR_MASK = 'h7f8, // address mask to generate sequencer channel/run
// 0x1030..1031 - MCONTR_EN // 0 bits, disable/enable memory controller
// 0x1032..1033 - REFRESH_EN // 0 bits, disable/enable memory refresh
// 0x1034..1037 - reserved
parameter MCONTR_TOP_0BIT_MCONTR_EN = 'h0, // set pre-programmed delays
parameter MCONTR_TOP_0BIT_REFRESH_EN = 'h2, // disable/enable command/address outputs
//0x1040..107f - 16-bit data
// 0x1040..104f - RUN_CHN // address to set sequncer channel and run (4 LSB-s - channel) - bits?
// parameter RUN_CHN_REL = 'h040, // address to set sequnecer channel and run (4 LSB-s - channel)
// parameter RUN_CHN_REL_MASK = 'h7f0, // address mask to generate sequencer channel/run
// 0x1050..1057: MCONTR_PHY16
parameter MCONTR_PHY_16BIT_ADDR = 'h050, // address to set sequnecer channel and run (4 LSB-s - channel)
parameter MCONTR_PHY_16BIT_ADDR_MASK = 'h7f8, // address mask to generate sequencer channel/run
// 0x1050 - PATTERNS // 16 bits
// 0x1051 - PATTERNS_TRI // 16-bit address to set DQM and DQS tristate on/off patterns {dqs_off,dqs_on, dq_off,dq_on} - 4 bits each
// 0x1052 - WBUF_DELAY // 4 bits - extra delay (in mclk cycles) to add to write buffer enable (DDR3 read data)
// 0x1053 - EXTRA_REL // 1 bit - set extra parameters (currently just inv_clk_div)
// 0x1054 - STATUS_CNTRL // 8 bits - write to status control
parameter MCONTR_PHY_16BIT_PATTERNS = 'h0, // set DQM and DQS patterns (16'h0055)
parameter MCONTR_PHY_16BIT_PATTERNS_TRI = 'h1, // 16-bit address to set DQM and DQS tristate on/off patterns {dqs_off,dqs_on, dq_off,dq_on} - 4 bits each
parameter MCONTR_PHY_16BIT_WBUF_DELAY = 'h2, // 4? bits - extra delay (in mclk cycles) to add to write buffer enable (DDR3 read data)
parameter MCONTR_PHY_16BIT_EXTRA = 'h3, // ? bits - set extra parameters (currently just inv_clk_div)
parameter MCONTR_PHY_STATUS_CNTRL = 'h4, // write to status control (8-bit)
//0x1060..106f: arbiter priority data
parameter MCONTR_ARBIT_ADDR = 'h060, // Address to set channel priorities
parameter MCONTR_ARBIT_ADDR_MASK = 'h7f0, // Address mask to set channel priorities
//0x1070..1077 - 16-bit top memory controller:
parameter MCONTR_TOP_16BIT_ADDR = 'h070, // address to set mcontr top control registers
parameter MCONTR_TOP_16BIT_ADDR_MASK = 'h7f8, // address mask to set mcontr top control registers
// 0x1070 - MCONTR_CHN_EN // 16 bits per-channel enable (want/need requests)
// 0x1071 - REFRESH_PERIOD // 8-bit refresh period
// 0x1072 - REFRESH_ADDRESS // 10 bits
// 0x1073 - STATUS_CNTRL // 8 bits - write to status control (and debug?)
parameter MCONTR_TOP_16BIT_CHN_EN = 'h0, // 16 bits per-channel enable (want/need requests)
parameter MCONTR_TOP_16BIT_REFRESH_PERIOD = 'h1, // 8-bit refresh period
parameter MCONTR_TOP_16BIT_REFRESH_ADDRESS= 'h2, // 10 bits refresh address in the sequencer (PL) memory
parameter MCONTR_TOP_16BIT_STATUS_CNTRL= 'h3, // 8 bits - write to status control (and debug?)
// Status read address
parameter MCONTR_PHY_STATUS_REG_ADDR= 'h0, // 8 or less bits: status register address to use for memory controller phy
parameter MCONTR_TOP_STATUS_REG_ADDR= 'h1, // 8 or less bits: status register address to use for memory controller
parameter CHNBUF_READ_LATENCY = 2, //1, // external channel buffer extra read latency ( 0 - data available next cycle after re (but prev. data))
parameter DFLT_DQS_PATTERN= 8'haa, // TODO: make work for the simulator too 8'h55,
parameter DFLT_DQM_PATTERN= 8'h00, // 8'h00
parameter DFLT_DQ_TRI_ON_PATTERN= 4'h7, // DQ tri-state control word, first when enabling output
parameter DFLT_DQ_TRI_OFF_PATTERN= 4'he, // DQ tri-state control word, first after disabling output
parameter DFLT_DQS_TRI_ON_PATTERN= 4'h3, // DQS tri-state control word, first when enabling output
parameter DFLT_DQS_TRI_OFF_PATTERN=4'hc, // DQS tri-state control word, first after disabling output
parameter DFLT_WBUF_DELAY= 4'h9, // TODO: Find the reason - simulation needs 8, target - 9
parameter DFLT_INV_CLK_DIV= 1'b0,
parameter DFLT_CHN_EN= 16'h0, // channel mask to be enabled at reset
parameter DFLT_REFRESH_ADDR= 10'h0, // refresh sequence address in command memory
parameter DFLT_REFRESH_PERIOD= 8'h0, // default 8-bit refresh period (scale?)
parameter ADDRESS_NUMBER= 15,
parameter COLADDR_NUMBER= 10,
parameter PHASE_WIDTH = 8,
parameter SLEW_DQ = "SLOW",
parameter SLEW_DQS = "SLOW",
parameter SLEW_CMDA = "SLOW",
parameter SLEW_CLK = "SLOW",
parameter IBUF_LOW_PWR = "TRUE",
`ifdef use200Mhz
parameter real REFCLK_FREQUENCY = 200.0, // 300.0,
parameter HIGH_PERFORMANCE_MODE = "FALSE",
parameter CLKIN_PERIOD = 20, // 10, //ns >1.25, 600<Fvco<1200 // Hardware 150MHz , change to | 6.667
parameter CLKFBOUT_MULT = 16, // 8, // Fvco=Fclkin*CLKFBOUT_MULT_F/DIVCLK_DIVIDE, Fout=Fvco/CLKOUT#_DIVIDE | 16
parameter CLKFBOUT_MULT_REF = 16, // 18, // 9, // Fvco=Fclkin*CLKFBOUT_MULT_F/DIVCLK_DIVIDE, Fout=Fvco/CLKOUT#_DIVIDE | 6
parameter CLKFBOUT_DIV_REF = 4, // 200Mhz 3, // To get 300MHz for the reference clock
`else
parameter real REFCLK_FREQUENCY = 300.0,
parameter HIGH_PERFORMANCE_MODE = "FALSE",
parameter CLKIN_PERIOD = 10, //ns >1.25, 600<Fvco<1200
parameter CLKFBOUT_MULT = 8, // Fvco=Fclkin*CLKFBOUT_MULT_F/DIVCLK_DIVIDE, Fout=Fvco/CLKOUT#_DIVIDE
parameter CLKFBOUT_MULT_REF = 9, // Fvco=Fclkin*CLKFBOUT_MULT_F/DIVCLK_DIVIDE, Fout=Fvco/CLKOUT#_DIVIDE
parameter CLKFBOUT_DIV_REF = 3, // To get 300MHz for the reference clock
`endif
parameter DIVCLK_DIVIDE= 1,
parameter CLKFBOUT_PHASE = 0.000,
parameter SDCLK_PHASE = 0.000,
parameter CLK_PHASE = 0.000,
parameter CLK_DIV_PHASE = 0.000,
parameter MCLK_PHASE = 90.000,
parameter REF_JITTER1 = 0.010,
parameter SS_EN = "FALSE",
parameter SS_MODE = "CENTER_HIGH",
parameter SS_MOD_PERIOD = 10000,
parameter CMD_PAUSE_BITS= 10,
parameter CMD_DONE_BIT= 10,
parameter NUM_CYCLES_LOW_BIT= 'h6, // decode addresses [NUM_CYCLES_LOW_BIT+:4] into command a/d length
// TODO: put actual data
parameter NUM_CYCLES_00 = 2, // 2-cycle 000.003f
parameter NUM_CYCLES_01 = 4, // 4-cycle 040.007f
parameter NUM_CYCLES_02 = 3, // 3-cycle 080.00bf
parameter NUM_CYCLES_03 = 3, // 3-cycle 0c0.00ff
parameter NUM_CYCLES_04 = 6, // 6-cycle 100.013f
parameter NUM_CYCLES_05 = 6, // 6-cycle 140.017f
parameter NUM_CYCLES_06 = 4, // 4-cycle 180.01bf
parameter NUM_CYCLES_07 = 4, // 4-cycle 1c0.01ff
parameter NUM_CYCLES_08 = 6, // 6-cycle 200.023f
parameter NUM_CYCLES_09 = 6, //
parameter NUM_CYCLES_10 = 6, //
parameter NUM_CYCLES_11 = 6, //
parameter NUM_CYCLES_12 = 6, //
parameter NUM_CYCLES_13 = 5, // 5-cycle - not yet used
parameter NUM_CYCLES_14 = 6, // 6-cycle - not yet used
parameter NUM_CYCLES_15 = 9, // single-cycle
parameter NUM_CYCLES_16 = 6, //
parameter NUM_CYCLES_17 = 6, //
parameter NUM_CYCLES_18 = 6, //
parameter NUM_CYCLES_19 = 6, //
parameter NUM_CYCLES_20 = 6, //
parameter NUM_CYCLES_21 = 6, //
parameter NUM_CYCLES_22 = 6, //
parameter NUM_CYCLES_23 = 6, //
parameter NUM_CYCLES_24 = 6, //
parameter NUM_CYCLES_25 = 6, //
parameter NUM_CYCLES_26 = 6, //
parameter NUM_CYCLES_27 = 6, //
parameter NUM_CYCLES_28 = 6, //
parameter NUM_CYCLES_29 = 6, //
parameter NUM_CYCLES_30 = 6, //
parameter NUM_CYCLES_31 = 6, //
// parameter CMD0_ADDR = 'h0800, // AXI write to command sequence memory
// parameter CMD0_ADDR_MASK = 'h1800, // AXI read address mask for the command sequence memory
parameter MCNTRL_PS_ADDR= 'h100,
parameter MCNTRL_PS_MASK= 'h7e0, // both channels 0 and 1
parameter MCNTRL_PS_STATUS_REG_ADDR= 'h2,
parameter MCNTRL_PS_EN_RST= 'h0,
parameter MCNTRL_PS_CMD= 'h1,
parameter MCNTRL_PS_STATUS_CNTRL= 'h2,
parameter NUM_XFER_BITS= 6, // number of bits to specify transfer length
parameter FRAME_WIDTH_BITS= 13, // Maximal frame width - 8-word (16 bytes) bursts
parameter FRAME_HEIGHT_BITS= 16, // Maximal frame height
parameter LAST_FRAME_BITS= 16, // number of bits in frame counter (before rolls over)
parameter MCNTRL_SCANLINE_CHN1_ADDR= 'h120,
parameter MCNTRL_SCANLINE_CHN3_ADDR= 'h130,
parameter MCNTRL_SCANLINE_MASK= 'h7f0, // both channels 0 and 1
parameter MCNTRL_SCANLINE_MODE= 'h0, // set mode register: {extra_pages[1:0],enable,!reset}
parameter MCNTRL_SCANLINE_STATUS_CNTRL= 'h1, // control status reporting
parameter MCNTRL_SCANLINE_STARTADDR= 'h2, // 22-bit frame start address (3 CA LSBs==0. BA==0)
parameter MCNTRL_SCANLINE_FRAME_SIZE= 'h3, // 22-bit frame start address increment (3 CA LSBs==0. BA==0)
parameter MCNTRL_SCANLINE_FRAME_LAST= 'h4, // 16-bit last frame number in the buffer
parameter MCNTRL_SCANLINE_FRAME_FULL_WIDTH= 'h5, // Padded line length (8-row increment), in 8-bursts (16 bytes)
parameter MCNTRL_SCANLINE_WINDOW_WH= 'h6, // low word - 13-bit window width (0->'h4000), high word - 16-bit frame height (0->'h10000)
parameter MCNTRL_SCANLINE_WINDOW_X0Y0= 'h7, // low word - 13-bit window left, high word - 16-bit window top
parameter MCNTRL_SCANLINE_WINDOW_STARTXY= 'h8, // low word - 13-bit start X (relative to window), high word - 16-bit start y
// Start XY can be used when read command to start from the middle
// TODO: Add number of blocks to R/W? (blocks can be different) - total length?
// Read back current address (for debugging)?
parameter MCNTRL_SCANLINE_STATUS_REG_CHN1_ADDR= 'h4,
parameter MCNTRL_SCANLINE_STATUS_REG_CHN3_ADDR= 'h6,
parameter MCNTRL_SCANLINE_PENDING_CNTR_BITS= 2, // Number of bits to count pending trasfers, currently 2 is enough, but may increase
// if memory controller will allow programming several sequences in advance to
// spread long-programming (tiled) over fast-programming (linear) requests.
// But that should not be too big to maintain 2-level priorities
parameter MCNTRL_SCANLINE_FRAME_PAGE_RESET =1'b0, // reset internal page number to zero at the frame start (false - only when hard/soft reset)
parameter MAX_TILE_WIDTH= 6, // number of bits to specify maximal tile (width-1) (6 -> 64)
parameter MAX_TILE_HEIGHT= 6, // number of bits to specify maximal tile (height-1) (6 -> 64)
parameter MCNTRL_TILED_CHN2_ADDR= 'h140,
parameter MCNTRL_TILED_CHN4_ADDR= 'h150,
parameter MCNTRL_TILED_MASK= 'h7f0, // both channels 0 and 1
parameter MCNTRL_TILED_MODE= 'h0, // set mode register: {extra_pages[1:0],write_mode,enable,!reset}
parameter MCNTRL_TILED_STATUS_CNTRL= 'h1, // control status reporting
parameter MCNTRL_TILED_STARTADDR= 'h2, // 22-bit frame start address (3 CA LSBs==0. BA==0)
parameter MCNTRL_TILED_FRAME_SIZE= 'h3, // 22-bit frame start address increment (3 CA LSBs==0. BA==0)
parameter MCNTRL_TILED_FRAME_LAST= 'h4, // 16-bit last frame number in the buffer
parameter MCNTRL_TILED_FRAME_FULL_WIDTH='h5, // Padded line length (8-row increment), in 8-bursts (16 bytes)
parameter MCNTRL_TILED_WINDOW_WH= 'h6, // low word - 13-bit window width (0->'h4000), high word - 16-bit frame height (0->'h10000)
parameter MCNTRL_TILED_WINDOW_X0Y0= 'h7, // low word - 13-bit window left, high word - 16-bit window top
parameter MCNTRL_TILED_WINDOW_STARTXY= 'h8, // low word - 13-bit start X (relative to window), high word - 16-bit start y
// Start XY can be used when read command to start from the middle
// TODO: Add number of blocks to R/W? (blocks can be different) - total length?
// Read back current address (for debugging)?
parameter MCNTRL_TILED_TILE_WHS= 'h9, // low byte - 6-bit tile width in 8-bursts, second byte - tile height (0 - > 64),
// 3-rd byte - vertical step (to control tile vertical overlap)
parameter MCNTRL_TILED_STATUS_REG_CHN2_ADDR= 'h5,
parameter MCNTRL_TILED_STATUS_REG_CHN4_ADDR= 'h7,
parameter MCNTRL_TILED_PENDING_CNTR_BITS=2, // Number of bits to count pending trasfers, currently 2 is enough, but may increase
// if memory controller will allow programming several sequences in advance to
// spread long-programming (tiled) over fast-programming (linear) requests.
// But that should not be too big to maintain 2-level priorities
parameter MCNTRL_TILED_FRAME_PAGE_RESET =1'b0, // reset internal page number to zero at the frame start (false - only when hard/soft reset)
parameter BUFFER_DEPTH32= 10, // Block rum buffer depth on a 32-bit port
// bits in mode control word
parameter MCONTR_LINTILE_NRESET = 0, // reset if 0
parameter MCONTR_LINTILE_EN = 1, // enable requests
parameter MCONTR_LINTILE_WRITE = 2, // write to memory mode
parameter MCONTR_LINTILE_EXTRAPG = 3, // extra pages (over 1) needed by the client simultaneously
parameter MCONTR_LINTILE_EXTRAPG_BITS = 2, // number of bits to use for extra pages
parameter MCONTR_LINTILE_KEEP_OPEN = 5, // keep banks open (will be used only if number of rows <= 8)
parameter MCONTR_LINTILE_BYTE32 = 6, // use 32-byte wide columns in each tile (false - 16-byte)
parameter MCONTR_LINTILE_RST_FRAME = 8, // reset frame number
parameter MCONTR_LINTILE_SINGLE = 9, // read/write a single page
parameter MCONTR_LINTILE_REPEAT = 10, // read/write pages until disabled
parameter MCONTR_LINTILE_DIS_NEED = 11, // disable 'need' request
// Channel test module parameters
parameter MCNTRL_TEST01_ADDR= 'h0f0,
parameter MCNTRL_TEST01_MASK= 'h7f0,
parameter MCNTRL_TEST01_CHN1_MODE= 'h2, // set mode register for channel 5
parameter MCNTRL_TEST01_CHN1_STATUS_CNTRL= 'h3, // control status reporting for channel 5
parameter MCNTRL_TEST01_CHN2_MODE= 'h4, // set mode register for channel 2
parameter MCNTRL_TEST01_CHN2_STATUS_CNTRL= 'h5, // control status reporting for channel 2
parameter MCNTRL_TEST01_CHN3_MODE= 'h6, // set mode register for channel 3
parameter MCNTRL_TEST01_CHN3_STATUS_CNTRL= 'h7, // control status reporting for channel 3
parameter MCNTRL_TEST01_CHN4_MODE= 'h8, // set mode register for channel 4
parameter MCNTRL_TEST01_CHN4_STATUS_CNTRL= 'h9, // control status reporting for channel 4
parameter MCNTRL_TEST01_STATUS_REG_CHN1_ADDR= 'h3c, // status/readback register for channel 2
parameter MCNTRL_TEST01_STATUS_REG_CHN2_ADDR= 'h3d, // status/readback register for channel 3
parameter MCNTRL_TEST01_STATUS_REG_CHN3_ADDR= 'h3e, // status/readback register for channel 4
parameter MCNTRL_TEST01_STATUS_REG_CHN4_ADDR= 'h3f, // status/readback register for channel 4
parameter MCONTR_SENS_BASE = 'h680, // .. 'h6bf
parameter MCONTR_SENS_INC = 'h10,
parameter MCONTR_CMPRS_BASE = 'h6c0, // .. 'h6ff
parameter MCONTR_CMPRS_INC = 'h10,
parameter MCONTR_SENS_STATUS_BASE = 'h28, // .. 'h2b
parameter MCONTR_SENS_STATUS_INC = 'h1,
parameter MCONTR_CMPRS_STATUS_BASE = 'h2c, // .. 'h2f
parameter MCONTR_CMPRS_STATUS_INC = 'h1,
// membridge module parameters
parameter MEMBRIDGE_ADDR= 'h200,
parameter MEMBRIDGE_MASK= 'h7f0,
parameter MEMBRIDGE_CTRL= 'h0, // bit 0 - enable, bits[2:1]: 01 - start, 11 - start and reset address
parameter MEMBRIDGE_STATUS_CNTRL= 'h1,
parameter MEMBRIDGE_LO_ADDR64= 'h2, // low address of the system memory, in 64-bit words (<<3 to get byte address)
parameter MEMBRIDGE_SIZE64= 'h3, // size of the system memory range (access will roll over to lo_addr
parameter MEMBRIDGE_START64= 'h4, // start address relative to lo_addr
parameter MEMBRIDGE_LEN64= 'h5, // full length of transfer in 64-bit words
parameter MEMBRIDGE_WIDTH64= 'h6, // frame width in 64-bit words (partial last page in each line)
parameter MEMBRIDGE_MODE= 'h7, // frame width in 64-bit words (partial last page in each line)
parameter MEMBRIDGE_STATUS_REG= 'h3b,
parameter RSEL= 1'b1, // late/early READ commands (to adjust timing by 1 SDCLK period)
parameter WSEL= 1'b0, // late/early WRITE commands (to adjust timing by 1 SDCLK period)
parameter SENSOR_GROUP_ADDR = 'h400, // sensor registers base address
parameter SENSOR_BASE_INC = 'h040, // increment for sesor channel
parameter HIST_SAXI_ADDR_REL = 'h100, // histograms control addresses (16 locations) relative to SENSOR_GROUP_ADDR
parameter HIST_SAXI_MODE_ADDR_REL = 'h110, // histograms mode address (1 locatios) relative to SENSOR_GROUP_ADDR
parameter SENSI2C_STATUS_REG_BASE = 'h20, // 4 locations" x20, x22, x24, x26
parameter SENSI2C_STATUS_REG_INC = 2, // increment to the next sensor
parameter SENSI2C_STATUS_REG_REL = 0, // 4 locations" 'h20, 'h22, 'h24, 'h26
parameter SENSIO_STATUS_REG_REL = 1, // 4 locations" 'h21, 'h23, 'h25, 'h27
parameter SENSOR_NUM_HISTOGRAM= 3, // number of histogram channels
parameter HISTOGRAM_RAM_MODE = "BUF32", // "NOBUF", // valid: "NOBUF" (32-bits, no buffering), "BUF18", "BUF32"
parameter SENS_NUM_SUBCHN = 3, // number of subchannels for his sensor ports (1..4)
parameter SENS_GAMMA_BUFFER = 0, // 1 - use "shadow" table for clean switching, 0 - single table per channel
// parameters defining address map
parameter SENSOR_CTRL_RADDR = 0, // relative to SENSOR_GROUP_ADDR
parameter SENSOR_CTRL_ADDR_MASK = 'h7ff, //
// bits of the SENSOR mode register
parameter SENSOR_MODE_WIDTH = 10,
parameter SENSOR_HIST_EN_BITS = 0, // 0..3 1 - enable histogram modules, disable after processing the started frame
parameter SENSOR_HIST_NRST_BITS = 4, // 0 - immediately reset all histogram modules
parameter SENSOR_CHN_EN_BIT = 8, // 1 - this enable channel
parameter SENSOR_16BIT_BIT = 9, // 0 - 8 bpp mode, 1 - 16 bpp (bypass gamma). Gamma-processed data is still used for histograms
parameter SENSI2C_CTRL_RADDR = 2, // 302..'h303
parameter SENSI2C_CTRL_MASK = 'h7fe,
// sensor_i2c_io relative control register addresses
parameter SENSI2C_CTRL = 'h0,
// Control register bits
parameter SENSI2C_CMD_RESET = 14, // [14] reset all FIFO (takes 16 clock pulses), also - stops i2c until run command
parameter SENSI2C_CMD_RUN = 13, // [13:12]3 - run i2c, 2 - stop i2c (needed before software i2c), 1,0 - no change to run state
parameter SENSI2C_CMD_RUN_PBITS = 1,
parameter SENSI2C_CMD_BYTES = 11, // if 1, use [10:9] to set command bytes to send after slave address (0..3)
parameter SENSI2C_CMD_BYTES_PBITS = 2,
parameter SENSI2C_CMD_DLY = 8, // [7:0] - duration of quater i2c cycle (if 0, [3:0] control SCL+SDA)
parameter SENSI2C_CMD_DLY_PBITS = 8,
// direct control of SDA/SCL mutually exclusive with DLY control, disabled by running i2c
parameter SENSI2C_CMD_SCL = 16, // [17:16] : 0: NOP, 1: 1'b0->SCL, 2: 1'b1->SCL, 3: 1'bz -> SCL
parameter SENSI2C_CMD_SCL_WIDTH = 2,
parameter SENSI2C_CMD_SDA = 18, // [19:18] : 0: NOP, 1: 1'b0->SDA, 2: 1'b1->SDA, 3: 1'bz -> SDA,
parameter SENSI2C_CMD_SDA_WIDTH = 2,
parameter SENSI2C_STATUS = 'h1,
parameter SENS_SYNC_RADDR = 'h4,
parameter SENS_SYNC_MASK = 'h7fc,
// 2 locations reserved for control/status (if they will be needed)
parameter SENS_SYNC_MULT = 'h2, // relative register address to write number of frames to combine in one (minus 1, '0' - each farme)
parameter SENS_SYNC_LATE = 'h3, // number of lines to delay late frame sync
parameter SENS_GAMMA_RADDR = 'h38, // 'h38..'h3b was 4,
parameter SENS_GAMMA_ADDR_MASK = 'h7fc,
// sens_gamma registers
parameter SENS_GAMMA_CTRL = 'h0,
parameter SENS_GAMMA_ADDR_DATA = 'h1, // bit 20 ==1 - table address, bit 20==0 - table data (18 bits)
parameter SENS_GAMMA_HEIGHT01 = 'h2, // bits [15:0] - height minus 1 of image 0, [31:16] - height-1 of image1
parameter SENS_GAMMA_HEIGHT2 = 'h3, // bits [15:0] - height minus 1 of image 2 ( no need for image 3)
// bits of the SENS_GAMMA_CTRL mode register
parameter SENS_GAMMA_MODE_WIDTH = 5, // does not include trig
parameter SENS_GAMMA_MODE_BAYER = 0,
parameter SENS_GAMMA_MODE_PAGE = 2,
parameter SENS_GAMMA_MODE_EN = 3,
parameter SENS_GAMMA_MODE_REPET = 4,
parameter SENS_GAMMA_MODE_TRIG = 5,
// Vignetting correction / pixel value scaling - controlled via single data word (same as in 252), some of bits [23:16]
// are used to select register, bits 25:24 - select sub-frame
parameter SENS_LENS_RADDR = 'h3c,
parameter SENS_LENS_ADDR_MASK = 'h7fc,
parameter SENS_LENS_COEFF = 'h3, // set vignetting/scale coefficients (
parameter SENS_LENS_AX = 'h00, // 00000...
parameter SENS_LENS_AX_MASK = 'hf8,
parameter SENS_LENS_AY = 'h08, // 00001...
parameter SENS_LENS_AY_MASK = 'hf8,
parameter SENS_LENS_C = 'h10, // 00010...
parameter SENS_LENS_C_MASK = 'hf8,
parameter SENS_LENS_BX = 'h20, // 001.....
parameter SENS_LENS_BX_MASK = 'he0,
parameter SENS_LENS_BY = 'h40, // 010.....
parameter SENS_LENS_BY_MASK = 'he0,
parameter SENS_LENS_SCALES = 'h60, // 01100...
parameter SENS_LENS_SCALES_MASK = 'hf8,
parameter SENS_LENS_FAT0_IN = 'h68, // 01101000
parameter SENS_LENS_FAT0_IN_MASK = 'hff,
parameter SENS_LENS_FAT0_OUT = 'h69, // 01101001
parameter SENS_LENS_FAT0_OUT_MASK = 'hff,
parameter SENS_LENS_POST_SCALE = 'h6a, // 01101010
parameter SENS_LENS_POST_SCALE_MASK = 'hff,
parameter SENSIO_RADDR = 8, //'h408 .. 'h40f
parameter SENSIO_ADDR_MASK = 'h7f8,
// sens_parallel12 registers
parameter SENSIO_CTRL = 'h0,
// SENSIO_CTRL register bits
parameter SENS_CTRL_MRST = 0, // 1: 0
parameter SENS_CTRL_ARST = 2, // 3: 2
parameter SENS_CTRL_ARO = 4, // 5: 4
parameter SENS_CTRL_RST_MMCM = 6, // 7: 6
parameter SENS_CTRL_EXT_CLK = 8, // 9: 8
parameter SENS_CTRL_LD_DLY = 10, // 10
parameter SENS_CTRL_QUADRANTS = 12, // 17:12, enable - 20
parameter SENS_CTRL_QUADRANTS_WIDTH = 6,
parameter SENS_CTRL_QUADRANTS_EN = 20, // 17:12, enable - 20 (2 bits reserved)
parameter SENSIO_STATUS = 'h1,
parameter SENSIO_JTAG = 'h2,
// SENSIO_JTAG register bits
parameter SENS_JTAG_PGMEN = 8,
parameter SENS_JTAG_PROG = 6,
parameter SENS_JTAG_TCK = 4,
parameter SENS_JTAG_TMS = 2,
parameter SENS_JTAG_TDI = 0,
parameter SENSIO_WIDTH = 'h3, // 1.. 2^16, 0 - use HACT
parameter SENSIO_DELAYS = 'h4, // 'h4..'h7
// 4 of 8-bit delays per register
// sensor_i2c_io command/data write registers s (relative to SENSOR_GROUP_ADDR)
parameter SENSI2C_ABS_RADDR = 'h10, // 'h410..'h41f
parameter SENSI2C_REL_RADDR = 'h20, // 'h420..'h42f
parameter SENSI2C_ADDR_MASK = 'h7f0, // both for SENSI2C_ABS_ADDR and SENSI2C_REL_ADDR
// sens_hist registers (relative to SENSOR_GROUP_ADDR)
parameter HISTOGRAM_RADDR0 = 'h30, //
parameter HISTOGRAM_RADDR1 = 'h32, //
parameter HISTOGRAM_RADDR2 = 'h34, //
parameter HISTOGRAM_RADDR3 = 'h36, //
parameter HISTOGRAM_ADDR_MASK = 'h7fe, // for each channel
// sens_hist registers
parameter HISTOGRAM_LEFT_TOP = 'h0,
parameter HISTOGRAM_WIDTH_HEIGHT = 'h1, // 1.. 2^16, 0 - use HACT
//sensor_i2c_io other parameters
parameter integer SENSI2C_DRIVE= 12,
parameter SENSI2C_IBUF_LOW_PWR= "TRUE",
parameter SENSI2C_IOSTANDARD = "LVCMOS25",
parameter SENSI2C_SLEW = "SLOW",
//sensor_fifo parameters
parameter SENSOR_DATA_WIDTH = 12,
parameter SENSOR_FIFO_2DEPTH = 4,
parameter SENSOR_FIFO_DELAY = 4'd5, // 7,
// other parameters for histogram_saxi module
parameter HIST_SAXI_ADDR_MASK = 'h7f0,
parameter HIST_SAXI_MODE_WIDTH = 8,
parameter HIST_SAXI_EN = 0,
parameter HIST_SAXI_NRESET = 1,
parameter HIST_CONFIRM_WRITE = 2, // wait write confirmation for each block
// bit 3 is not used
parameter HIST_SAXI_AWCACHE = 4, // ..7 Write 4'h3 there, cache mode (4 bits, default 4'h3)
parameter HIST_SAXI_MODE_ADDR_MASK = 'h7ff,
parameter NUM_FRAME_BITS = 4, // number of bits use for frame number
// Other parameters
parameter SENS_SYNC_FBITS = 16, // number of bits in a frame counter for linescan mode
parameter SENS_SYNC_LBITS = 16, // number of bits in a line counter for sof_late output (limited by eof)
parameter SENS_SYNC_LATE_DFLT = 15, // number of lines to delay late frame sync
parameter SENS_SYNC_MINBITS = 8, // number of bits to enforce minimal frame period
parameter SENS_SYNC_MINPER = 130, // minimal frame period (in pclk/mclk?)
// sens_parallel12 other parameters
// parameter IODELAY_GRP ="IODELAY_SENSOR", // may need different for different channels?
parameter integer IDELAY_VALUE = 0,
parameter integer PXD_DRIVE = 12,
parameter PXD_IBUF_LOW_PWR = "TRUE",
parameter PXD_IOSTANDARD = "LVCMOS25",
parameter PXD_SLEW = "SLOW",
`ifdef use200Mhz
parameter real SENS_REFCLK_FREQUENCY = 300.0, // same as REFCLK_FREQUENCY
`else
parameter real SENS_REFCLK_FREQUENCY = 200.0,
`endif
parameter SENS_HIGH_PERFORMANCE_MODE = "FALSE",
parameter SENS_PHASE_WIDTH= 8, // number of bits for te phase counter (depends on divisors)
parameter SENS_PCLK_PERIOD = 10.000, // input period in ns, 0..100.000 - MANDATORY, resolution down to 1 ps
parameter SENS_BANDWIDTH = "OPTIMIZED", //"OPTIMIZED", "HIGH","LOW"
parameter CLKFBOUT_MULT_SENSOR = 8, // 100 MHz --> 800 MHz
parameter CLKFBOUT_PHASE_SENSOR = 0.000, // CLOCK FEEDBACK phase in degrees (3 significant digits, -360.000...+360.000)
parameter IPCLK_PHASE = 0.000,
parameter IPCLK2X_PHASE = 0.000,
// parameter BUF_IPCLK = "BUFMR", //G", // "BUFR", // BUFR fails for both clocks for sensors1 and 3
// parameter BUF_IPCLK2X = "BUFMR", //G", // "BUFR",
parameter BUF_IPCLK_SENS0 = "BUFR", //G", // "BUFR", // BUFR fails for both clocks for sensors1 and 3
parameter BUF_IPCLK2X_SENS0 = "BUFR", //G", // "BUFR",
parameter BUF_IPCLK_SENS1 = "BUFG", // "BUFR", // BUFR fails for both clocks for sensors1 and 3
parameter BUF_IPCLK2X_SENS1 = "BUFG", // "BUFR",
parameter BUF_IPCLK_SENS2 = "BUFR", //G", // "BUFR", // BUFR fails for both clocks for sensors1 and 3
parameter BUF_IPCLK2X_SENS2 = "BUFR", //G", // "BUFR",
parameter BUF_IPCLK_SENS3 = "BUFG", // "BUFR", // BUFR fails for both clocks for sensors1 and 3
parameter BUF_IPCLK2X_SENS3 = "BUFG", // "BUFR",
parameter SENS_DIVCLK_DIVIDE = 1, // Integer 1..106. Divides all outputs with respect to CLKIN
parameter SENS_REF_JITTER1 = 0.010, // Expectet jitter on CLKIN1 (0.000..0.999)
parameter SENS_REF_JITTER2 = 0.010,
parameter SENS_SS_EN = "FALSE", // Enables Spread Spectrum mode
parameter SENS_SS_MODE = "CENTER_HIGH",//"CENTER_HIGH","CENTER_LOW","DOWN_HIGH","DOWN_LOW"
parameter SENS_SS_MOD_PERIOD = 10000, // integer 4000-40000 - SS modulation period in ns
parameter CMPRS_NUM_AFI_CHN = 1, // 2, // 1 - multiplex all 4 compressors to a single AXI_HP, 2 - split between to AXI_HP
parameter CMPRS_GROUP_ADDR = 'h600, // total of 'h60
parameter CMPRS_BASE_INC = 'h10,
parameter CMPRS_AFIMUX_RADDR0= 'h40, // relative to CMPRS_NUM_AFI_CHN ( 16 addr)
parameter CMPRS_AFIMUX_RADDR1= 'h50, // relative to CMPRS_NUM_AFI_CHN ( 16 addr)
parameter CMPRS_AFIMUX_MASK= 'h7f0,
parameter CMPRS_STATUS_REG_BASE= 'h10,
parameter CMPRS_HIFREQ_REG_BASE= 'h14,
parameter CMPRS_AFIMUX_REG_ADDR0= 'h18, // Uses 4 locations
parameter CMPRS_AFIMUX_REG_ADDR1= 'h1c, // Uses 4 locations
parameter CMPRS_STATUS_REG_INC= 1,
parameter CMPRS_HIFREQ_REG_INC= 1,
parameter CMPRS_MASK= 'h7f8,
parameter CMPRS_CONTROL_REG= 0,
parameter CMPRS_STATUS_CNTRL= 1,
parameter CMPRS_FORMAT= 2,
parameter CMPRS_COLOR_SATURATION= 3,
parameter CMPRS_CORING_MODE= 4,
parameter CMPRS_TABLES= 6, // 6..7
// Bit-fields in compressor control word
parameter CMPRS_CBIT_RUN = 2, // bit # to control compressor run modes
parameter CMPRS_CBIT_RUN_BITS = 2, // number of bits to control compressor run modes
parameter CMPRS_CBIT_QBANK = 6, // bit # to control quantization table page
parameter CMPRS_CBIT_QBANK_BITS = 3, // number of bits to control quantization table page
parameter CMPRS_CBIT_DCSUB = 8, // bit # to control extracting DC components bypassing DCT
parameter CMPRS_CBIT_DCSUB_BITS = 1, // bit # to control extracting DC components bypassing DCT
parameter CMPRS_CBIT_CMODE = 13, // bit # to control compressor color modes
parameter CMPRS_CBIT_CMODE_BITS = 4, // number of bits to control compressor color modes
parameter CMPRS_CBIT_FRAMES = 15, // bit # to control compressor multi/single frame buffer modes
parameter CMPRS_CBIT_FRAMES_BITS = 1, // number of bits to control compressor multi/single frame buffer modes
parameter CMPRS_CBIT_BAYER = 20, // bit # to control compressor Bayer shift mode
parameter CMPRS_CBIT_BAYER_BITS = 2, // number of bits to control compressor Bayer shift mode
parameter CMPRS_CBIT_FOCUS = 23, // bit # to control compressor focus display mode
parameter CMPRS_CBIT_FOCUS_BITS = 2, // number of bits to control compressor focus display mode
// compressor bit-fields decode
parameter CMPRS_CBIT_RUN_RST = 2'h0, // reset compressor, stop immediately
// parameter CMPRS_CBIT_RUN_DISABLE = 2'h1, // disable compression of the new frames, finish any already started
parameter CMPRS_CBIT_RUN_STANDALONE = 2'h2, // enable compressor, compress single frame from memory (async)
parameter CMPRS_CBIT_RUN_ENABLE = 2'h3, // enable compressor, enable synchronous compression mode
parameter CMPRS_CBIT_CMODE_JPEG18 = 4'h0, // color 4:2:0
parameter CMPRS_CBIT_CMODE_MONO6 = 4'h1, // mono 4:2:0 (6 blocks)
parameter CMPRS_CBIT_CMODE_JP46 = 4'h2, // jp4, 6 blocks, original
parameter CMPRS_CBIT_CMODE_JP46DC = 4'h3, // jp4, 6 blocks, dc -improved
parameter CMPRS_CBIT_CMODE_JPEG20 = 4'h4, // mono, 4 blocks (but still not actual monochrome JPEG as the blocks are scanned in 2x2 macroblocks)
parameter CMPRS_CBIT_CMODE_JP4 = 4'h5, // jp4, 4 blocks, dc-improved
parameter CMPRS_CBIT_CMODE_JP4DC = 4'h6, // jp4, 4 blocks, dc-improved
parameter CMPRS_CBIT_CMODE_JP4DIFF = 4'h7, // jp4, 4 blocks, differential
parameter CMPRS_CBIT_CMODE_JP4DIFFHDR = 4'h8, // jp4, 4 blocks, differential, hdr
parameter CMPRS_CBIT_CMODE_JP4DIFFDIV2 = 4'h9, // jp4, 4 blocks, differential, divide by 2
parameter CMPRS_CBIT_CMODE_JP4DIFFHDRDIV2 = 4'ha, // jp4, 4 blocks, differential, hdr,divide by 2
parameter CMPRS_CBIT_CMODE_MONO1 = 4'hb, // mono JPEG (not yet implemented)
parameter CMPRS_CBIT_CMODE_MONO4 = 4'he, // mono 4 blocks
parameter CMPRS_CBIT_FRAMES_SINGLE = 0, //1, // use a single-frame buffer for images
parameter CMPRS_COLOR18 = 0, // JPEG 4:2:0 with 18x18 overlapping tiles for de-bayer
parameter CMPRS_COLOR20 = 1, // JPEG 4:2:0 with 18x18 overlapping tiles for de-bayer (not implemented)
parameter CMPRS_MONO16 = 2, // JPEG 4:2:0 with 16x16 non-overlapping tiles, color components zeroed
parameter CMPRS_JP4 = 3, // JP4 mode with 16x16 macroblocks
parameter CMPRS_JP4DIFF = 4, // JP4DIFF mode TODO: see if correct
parameter CMPRS_MONO8 = 7, // Regular JPEG monochrome with 8x8 macroblocks (not yet implemented)
parameter CMPRS_FRMT_MBCM1 = 0, // bit # of number of macroblock columns minus 1 field in format word
parameter CMPRS_FRMT_MBCM1_BITS = 13, // number of bits in number of macroblock columns minus 1 field in format word
parameter CMPRS_FRMT_MBRM1 = 13, // bit # of number of macroblock rows minus 1 field in format word
parameter CMPRS_FRMT_MBRM1_BITS = 13, // number of bits in number of macroblock rows minus 1 field in format word
parameter CMPRS_FRMT_LMARG = 26, // bit # of left margin field in format word
parameter CMPRS_FRMT_LMARG_BITS = 5, // number of bits in left margin field in format word
parameter CMPRS_CSAT_CB = 0, // bit # of number of blue scale field in color saturation word
parameter CMPRS_CSAT_CB_BITS = 10, // number of bits in blue scale field in color saturation word
parameter CMPRS_CSAT_CR = 12, // bit # of number of red scale field in color saturation word
parameter CMPRS_CSAT_CR_BITS = 10, // number of bits in red scale field in color saturation word
parameter CMPRS_CORING_BITS = 3, // number of bits in coring mode
parameter CMPRS_TIMEOUT_BITS= 12,
parameter CMPRS_TIMEOUT= 1000, // mclk cycles
parameter CMPRS_AFIMUX_EN= 'h0, // enables (gl;obal and per-channel)
parameter CMPRS_AFIMUX_RST= 'h1, // per-channel resets
parameter CMPRS_AFIMUX_MODE= 'h2, // per-channel select - which register to return as status
parameter CMPRS_AFIMUX_STATUS_CNTRL= 'h4, // .. 'h7
parameter CMPRS_AFIMUX_SA_LEN= 'h8, // .. 'hf
parameter CMPRS_AFIMUX_WIDTH = 26, // maximal for status: currently only works with 26)
parameter CMPRS_AFIMUX_CYCBITS = 3,
parameter AFI_MUX_BUF_LATENCY = 4'd2, // buffers read latency from fifo_ren* to fifo_rdata* valid : 2 if no register layers are used
// GPIO control : 'h700..'h701, status: 'h30
parameter integer GPIO_DRIVE = 12,
parameter GPIO_ADDR = 'h700, // .701
parameter GPIO_MASK = 'h7fe,
parameter GPIO_STATUS_REG_ADDR = 'h30, // address where status can be read out (10 GPIO inputs)
parameter GPIO_IBUF_LOW_PWR = "TRUE",
parameter GPIO_IOSTANDARD = "LVCMOS15", // power is 1.5V
parameter GPIO_SLEW = "SLOW",
parameter GPIO_SET_PINS = 0, // Set GPIO output state, give control for some bits to other modules
parameter GPIO_SET_STATUS = 1, // set status mode
parameter GPIO_N = 10, // number of GPIO bits to control
parameter GPIO_PORTEN = 24, // bit number to control port enables (up from this)
// Timing (rtc+camsync) parameters
parameter RTC_ADDR= 'h704, // 'h707
parameter CAMSYNC_ADDR = 'h708, // 'h70f
parameter RTC_STATUS_REG_ADDR = 'h31, // (1 loc) address where status can be read out (currently just sequence # and alternating bit)
parameter RTC_SEC_USEC_ADDR = 'h32, // ..'h33 address where seconds of the snapshot can be read (microseconds - next address)
parameter RTC_MASK = 'h7fc,
parameter CAMSYNC_MASK = 'h7f8,
parameter CAMSYNC_MODE = 'h0,
parameter CAMSYNC_TRIG_SRC = 'h1, // setup trigger source
parameter CAMSYNC_TRIG_DST = 'h2, // setup trigger destination line(s)
parameter CAMSYNC_TRIG_PERIOD = 'h3, // setup output trigger period
parameter CAMSYNC_TRIG_DELAY0 = 'h4, // setup input trigger delay
parameter CAMSYNC_TRIG_DELAY1 = 'h5, // setup input trigger delay
parameter CAMSYNC_TRIG_DELAY2 = 'h6, // setup input trigger delay
parameter CAMSYNC_TRIG_DELAY3 = 'h7, // setup input trigger delay
parameter CAMSYNC_EN_BIT = 'h0, // enable module (0 - reset)
parameter CAMSYNC_SNDEN_BIT = 'h2, // enable writing ts_snd_en
parameter CAMSYNC_EXTERNAL_BIT = 'h4, // enable writing ts_external (0 - local timestamp in the frame header)
parameter CAMSYNC_TRIGGERED_BIT = 'h6, // triggered mode ( 0- async)
parameter CAMSYNC_MASTER_BIT = 'h9, // select a 2-bit master channel (master delay may be used as a flash delay)
parameter CAMSYNC_CHN_EN_BIT = 'he, // per-channel enable timestamp generation
parameter CAMSYNC_PRE_MAGIC = 6'b110100,
parameter CAMSYNC_POST_MAGIC = 6'b001101,
parameter RTC_MHZ= 25, // RTC input clock in MHz (should be interger number)
parameter RTC_BITC_PREDIV = 5, // number of bits to generate 2 MHz pulses counting refclk
parameter RTC_SET_USEC= 0, // 20-bit number of microseconds
parameter RTC_SET_SEC= 1, // 32-bit full number of seconds (und actually update timer)
parameter RTC_SET_CORR= 2, // write correction 16-bit signed
parameter RTC_SET_STATUS= 3, // generate an output pulse to take a snapshot
// Command sequencers parameters
parameter CMDFRAMESEQ_ADDR_BASE= 'h780,
parameter CMDFRAMESEQ_ADDR_INC= 'h20,
parameter CMDFRAMESEQ_MASK= 'h7e0,
parameter CMDFRAMESEQ_DEPTH = 64, // 32/64/128
parameter CMDFRAMESEQ_ABS = 0,
parameter CMDFRAMESEQ_REL = 16,
parameter CMDFRAMESEQ_CTRL = 31,
parameter CMDFRAMESEQ_RST_BIT = 14,
parameter CMDFRAMESEQ_RUN_BIT = 13,
parameter CMDSEQMUX_ADDR = 'h702, // only status control
parameter CMDSEQMUX_MASK = 'h7ff,
parameter CMDSEQMUX_STATUS = 'h38,
// Logger parameters
parameter LOGGER_ADDR = 'h720, //..'h721
parameter LOGGER_STATUS = 'h722, // .. 'h722
parameter LOGGER_STATUS_REG_ADDR = 'h39, // just 1 location)
parameter LOGGER_MASK = 'h7fe,
parameter LOGGER_STATUS_MASK = 'h7ff,
parameter LOGGER_PAGE_IMU = 0, // 'h00..'h1f - overlaps with period/duration/halfperiod/config?
parameter LOGGER_PAGE_GPS = 1, // 'h20..'h3f
parameter LOGGER_PAGE_MSG = 2, // 'h40..'h5f
parameter LOGGER_PERIOD = 0,
parameter LOGGER_BIT_DURATION = 1,
parameter LOGGER_BIT_HALF_PERIOD = 2, //rs232 half bit period
parameter LOGGER_CONFIG = 3,
parameter LOGGER_CONF_IMU = 2,
parameter LOGGER_CONF_IMU_BITS = 2,
parameter LOGGER_CONF_GPS = 7,
parameter LOGGER_CONF_GPS_BITS = 4,
parameter LOGGER_CONF_MSG = 13,
parameter LOGGER_CONF_MSG_BITS = 5,
parameter LOGGER_CONF_SYN = 18, // 15,
parameter LOGGER_CONF_SYN_BITS = 4, // 1,
parameter LOGGER_CONF_EN = 20, // 17,
parameter LOGGER_CONF_EN_BITS = 1,
parameter LOGGER_CONF_DBG = 25, // 22,
parameter LOGGER_CONF_DBG_BITS = 4,
parameter MULT_SAXI_HALF_BRAM_IN = 1, // 0 - use full 36Kb BRAM for the buffer, 1 - use just half
parameter MULT_SAXI_WLOG = 4, // number of bits for the input data ( 3 - 8 bit, 4 - 16-bit, 5 - 32-bit
parameter MULT_SAXI_ADDR = 'h730, // ..'h737
parameter MULT_SAXI_CNTRL_ADDR = 'h738, // ..'h739
parameter MULT_SAXI_STATUS_REG = 'h34, //..'h37 uses 4 consecutive locations
parameter MULT_SAXI_HALF_BRAM = 1, // 0 - use full 36Kb BRAM for the buffer, 1 - use just half
parameter MULT_SAXI_BSLOG0 = 4, // number of bits to represent burst size (4 - b.s. = 16, 0 - b.s = 1)
parameter MULT_SAXI_BSLOG1 = 4,
parameter MULT_SAXI_BSLOG2 = 4,
parameter MULT_SAXI_BSLOG3 = 4,
parameter MULT_SAXI_MASK = 'h7f8, // 4 address/length pairs. In bytes, but lower bits are set to 0?
parameter MULT_SAXI_CNTRL_MASK = 'h7fe, // mode and status - 2 locations
parameter MULT_SAXI_AWCACHE = 4'h3, //..7 cache mode (4 bits, default 4'h3)
parameter MULT_SAXI_ADV_WR = 4, // number of clock cycles before end of write to genearte adv_wr_done
parameter MULT_SAXI_ADV_RD = 3, // number of clock cycles before end of write to genearte adv_wr_done
// Clock management (input, generation, buffering)
parameter CLK_ADDR = 'h728, // ..'h729
parameter CLK_MASK = 'h7fe, //
parameter CLK_STATUS_REG_ADDR = 'h3a, //
parameter CLK_CNTRL = 0,
parameter CLK_STATUS = 1,
parameter CLKIN_PERIOD_AXIHP = 20, //ns >1.25, 600<Fvco<1200
parameter DIVCLK_DIVIDE_AXIHP = 1,
parameter CLKFBOUT_MULT_AXIHP = 18, // Fvco=Fclkin*CLKFBOUT_MULT_F/DIVCLK_DIVIDE, Fout=Fvco/CLKOUT#_DIVIDE
parameter CLKOUT_DIV_AXIHP = 6, // To get 150MHz for the reference clock
parameter BUF_CLK1X_AXIHP = "BUFG", // "BUFG", "BUFH", "BUFR", "NONE"
parameter CLKIN_PERIOD_PCLK = 42, // 24MHz
parameter DIVCLK_DIVIDE_PCLK = 1,
parameter CLKFBOUT_MULT_PCLK = 40, // 960 MHz
parameter CLKOUT_DIV_PCLK = 10, // 96MHz
parameter CLKOUT_DIV_PCLK2X = 5, // 192 MHz
parameter PHASE_CLK2X_PCLK = 0.000,
parameter BUF_CLK1X_PCLK = "BUFG",
parameter BUF_CLK1X_PCLK2X = "BUFG",
parameter CLKIN_PERIOD_XCLK = 20, // 50MHz
parameter DIVCLK_DIVIDE_XCLK = 1,
parameter CLKFBOUT_MULT_XCLK = 20, // 50*20=1000 MHz
parameter CLKOUT_DIV_XCLK = 10, // 100 MHz
parameter CLKOUT_DIV_XCLK2X = 5, // 200 MHz
parameter PHASE_CLK2X_XCLK = 0.000,
parameter BUF_CLK1X_XCLK = "BUFG",
parameter BUF_CLK1X_XCLK2X = "BUFG",
parameter CLKIN_PERIOD_SYNC = 20, // 50MHz
parameter DIVCLK_DIVIDE_SYNC = 1,
parameter CLKFBOUT_MULT_SYNC = 20, // 50*20=1000 MHz
parameter CLKOUT_DIV_SYNC = 10, // 100 MHz
parameter BUF_CLK1X_SYNC = "BUFG",
parameter MEMCLK_CAPACITANCE = "DONT_CARE",
parameter MEMCLK_IBUF_DELAY_VALUE = "0",
parameter MEMCLK_IBUF_LOW_PWR = "TRUE",
parameter MEMCLK_IFD_DELAY_VALUE = "AUTO",
parameter MEMCLK_IOSTANDARD = "SSTL15",
parameter FFCLK0_CAPACITANCE = "DONT_CARE",
parameter FFCLK0_DIFF_TERM = "FALSE",
parameter FFCLK0_DQS_BIAS = "FALSE",
parameter FFCLK0_IBUF_DELAY_VALUE = "0",
parameter FFCLK0_IBUF_LOW_PWR = "TRUE",
parameter FFCLK0_IFD_DELAY_VALUE = "AUTO",
parameter FFCLK0_IOSTANDARD = "RSDS_25",
parameter FFCLK1_CAPACITANCE = "DONT_CARE",
parameter FFCLK1_DIFF_TERM = "FALSE",
parameter FFCLK1_DQS_BIAS = "FALSE",
parameter FFCLK1_IBUF_DELAY_VALUE = "0",
parameter FFCLK1_IBUF_LOW_PWR = "TRUE",
parameter FFCLK1_IFD_DELAY_VALUE = "AUTO",
parameter FFCLK1_IOSTANDARD = "RSDS_25"
\ No newline at end of file
includes/x393_simulation_parameters.vh 0 → 100644
View file @ e4816b14
/*******************************************************************************
* File: x393_simulation_parameters.vh
* Date:2015-02-07
* Author: Andrey Filippov
* Description: Simulation-specific parameters for the x393
*
* Copyright (c) 2015 Elphel, Inc.
* x393_simulation_parameters.vh is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* x393_simulation_parameters.vh is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
, // to continue previous parameter list
parameter integer AXI_RDADDR_LATENCY= 2, // 2, //2, //2,
parameter integer AXI_WRADDR_LATENCY= 1, // 1, //2, //4,
parameter integer AXI_WRDATA_LATENCY= 2, // 1, //1, //1
parameter integer AXI_TASK_HOLD=1.0,
// parameter [1:0] DEFAULT_STATUS_MODE=3,
parameter SIMUL_AXI_READ_WIDTH=16,
parameter MEMCLK_PERIOD = 5.0,
parameter FCLK0_PERIOD = 41.667, // 10.417, 24MHz
parameter FCLK1_PERIOD = 0.0,
// parameter SENSOR12BITS_LLINE = 192, // 1664;// line duration in clocks
// parameter SENSOR12BITS_NCOLS = 66, //58; //56; // 129; //128; //1288;
// parameter SENSOR12BITS_NROWS = 18, // 16; // 1032;
// parameter SENSOR12BITS_NROWB = 1, // number of "blank rows" from vact to 1-st hact
// parameter SENSOR12BITS_NROWA = 1, // number of "blank rows" from last hact to end of vact
// parameter nAV = 24, //240; // clocks from ARO to VACT (actually from en_dclkd)
// parameter SENSOR12BITS_NBPF = 20, //16; // bpf length
parameter SENSOR12BITS_NGPL = 8, // bpf to hact
parameter SENSOR12BITS_NVLO = 1, // VACT=0 in video mode (clocks)
//parameter tMD = 14; //
//parameter tDDO = 10; // some confusion here - let's assume that it is from DCLK to Data out
parameter SENSOR12BITS_TMD = 4, //
parameter SENSOR12BITS_TDDO = 2, // some confusion here - let's assume that it is from DCLK to Data out
parameter SENSOR12BITS_TDDO1 = 5, //
// parameter SENSOR12BITS_TRIGDLY = 8, // delay between trigger input and start of output (VACT) in lines
// parameter SENSOR12BITS_RAMP = 1, // 1 - ramp, 0 - random (now - sensor.dat)
// parameter SENSOR12BITS_NEW_BAYER = 0, // 0 - "old" tiles (16x16, 1 - new - (18x18)
parameter HISTOGRAM_LEFT = 0, // 2; // left
parameter HISTOGRAM_TOP = 8, // 2, // top
parameter HISTOGRAM_WIDTH = 6, // width
parameter HISTOGRAM_HEIGHT = 6, // height
parameter HISTOGRAM_STRAT_PAGE = 20'h12345,
parameter FRAME_WIDTH_ROUND_BITS = 9, // multiple of 512 pixels (32 16-byte bursts) (11 - ful SDRAM page)
parameter WOI_WIDTH= 64,
parameter QUADRANTS_PXD_HACT_VACT = 6'h01 // 2 bits each: data-0, hact - 1, vact - 2
// 90-degree shifts for data [1:0], hact [3:2] and vact [5:4]
\ No newline at end of file
includes/x393_tasks01.vh 0 → 100644
View file @ e4816b14
/*******************************************************************************
* File: x393_tasks01.vh
* Date:2015-02-07
* Author: Andrey Filippov
* Description: Simulation tasks for the x393 (low level)
*
* Copyright (c) 2015 Elphel, Inc.
* x393_tasks01.vh is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* x393_tasks01.vh is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
// Low-level tasks
// alternative way to check for empty read queue (without a separate counter)
task write_contol_register;
input [29:0] reg_addr;
// input integer reg_addr;
input [31:0] data;
begin
axi_write_single_w(CONTROL_ADDR+reg_addr, data);
end
endtask
task read_contol_register;
input [29:0] reg_addr;
begin
read_and_wait_w(CONTROL_RBACK_ADDR+reg_addr);
end
endtask
task wait_read_queue_empty;
begin
wait (~rvalid && rready && (rid==LAST_ARID)); // nothing left in read queue?
SIMUL_AXI_FULL<=1'b0;
end
endtask
task axi_set_rd_lag;
input [3:0] lag;
begin
@(posedge CLK);
RD_LAG <= lag;
end
endtask
task axi_set_b_lag;
input [3:0] lag;
begin
@(posedge CLK);
B_LAG <= lag;
end
endtask
task read_and_wait_w;
input [29:0] address;
begin
read_and_wait ({address,2'b0});
end
endtask
task read_and_wait;
input [31:0] address;
begin
axi_read_addr(
GLOBAL_READ_ID, // id
address & 32'hfffffffc, // addr
4'h0, // len - single
1 // burst type - increment
);
GLOBAL_READ_ID <= GLOBAL_READ_ID+1;
wait (!CLK && rvalid && rready);
wait (CLK);
registered_rdata <= rdata;
wait (!CLK); // registered_rdata should be valid on exit
end
endtask
task axi_write_single_w; // address in bytes, not words
input [29:0] address;
input [31:0] data;
begin
`ifdef DEBUG_WR_SINGLE
$display("axi_write_single_w %h:%h @ %t",address,data,$time);
`endif
axi_write_single ({address,2'b0},data);
end
endtask
task axi_write_single; // address in bytes, not words
input [31:0] address;
input [31:0] data;
begin
axi_write_addr_data(
GLOBAL_WRITE_ID, // id
// address << 2, // addr
address & 32'hfffffffc, // addr
data,
4'h0, // len - single
1, // burst type - increment
1'b1, // data_en
4'hf, // wstrb
1'b1 // last
);
GLOBAL_WRITE_ID <= GLOBAL_WRITE_ID+1;
#0.1; // without this delay axi_write_addr_data() used old value of GLOBAL_WRITE_ID
end
endtask
task axi_write_addr_data;
input [11:0] id;
input [31:0] addr;
input [31:0] data;
input [ 3:0] len;
input [ 1:0] burst;
input data_en; // if 0 - do not send data, only address
input [ 3:0] wstrb;
input last;
reg data_sent;
// wire data_sent_d;
// assign #(.1) data_sent_d= data_sent;
begin
wait (!CLK && AW_READY);
AWID_IN_r <= id;
AWADDR_IN_r <= addr;
AWLEN_IN_r <= len;
AWSIZE_IN_r <= 3'b010;
AWBURST_IN_r <= burst;
AW_SET_CMD_r <= 1'b1;
if (data_en && W_READY) begin
WID_IN_r <= id;
WDATA_IN_r <= data;
WSTRB_IN_r <= wstrb;
WLAST_IN_r <= last;
W_SET_CMD_r <= 1'b1;
data_sent <= 1'b1;
end else begin
data_sent <= 1'b0;
end
DEBUG1 <=1'b1;
wait (CLK);
DEBUG1 <=1'b0;
AWID_IN_r <= 'hz;
AWADDR_IN_r <= 'hz;
AWLEN_IN_r <= 'hz;
AWSIZE_IN_r <= 'hz;
AWBURST_IN_r <= 'hz;
AW_SET_CMD_r <= 1'b0;
DEBUG2 <=1'b1;
if (data_sent) begin
WID_IN_r <= 'hz;
WDATA_IN_r <= 'hz;
WSTRB_IN_r <= 'hz;
WLAST_IN_r <= 'hz;
W_SET_CMD_r <= 1'b0;
end
// Now sent data if it was not sent simultaneously with the address
if (data_en && !data_sent) begin
DEBUG3 <=1'b1;
wait (!CLK && W_READY);
DEBUG3 <=1'b0;
WID_IN_r <= id;
WDATA_IN_r <= data;
WSTRB_IN_r <= wstrb;
WLAST_IN_r <= last;
W_SET_CMD_r <= 1'b1;
wait (CLK);
DEBUG3 <=1'bx;
WID_IN_r <= 'hz;
WDATA_IN_r <= 'hz;
WSTRB_IN_r <= 'hz;
WLAST_IN_r <= 'hz;
W_SET_CMD_r <= 1'b0;
end
DEBUG2 <=1'b0;
#0.1;
data_sent <= 1'b0;
#0.1;
end
endtask
task axi_write_data;
input [11:0] id;
input [31:0] data;
input [ 3:0] wstrb;
input last;
begin
wait (!CLK && W_READY);
WID_IN_r <= id;
WDATA_IN_r <= data;
WSTRB_IN_r <= wstrb;
WLAST_IN_r <= last;
W_SET_CMD_r <= 1'b1;
wait (CLK);
WID_IN_r <= 12'hz;
WDATA_IN_r <= 'hz;
WSTRB_IN_r <= 4'hz;
WLAST_IN_r <= 1'bz;
W_SET_CMD_r <= 1'b0;
#0.1;
end
endtask
task axi_read_addr;
input [11:0] id;
input [31:0] addr;
input [ 3:0] len;
input [ 1:0] burst;
begin
wait (!CLK && AR_READY);
ARID_IN_r <= id;
ARADDR_IN_r <= addr;
ARLEN_IN_r <= len;
ARSIZE_IN_r <= 3'b010;
ARBURST_IN_r <= burst;
AR_SET_CMD_r <= 1'b1;
wait (CLK);
ARID_IN_r <= 12'hz;
ARADDR_IN_r <= 'hz;
ARLEN_IN_r <= 4'hz;
ARSIZE_IN_r <= 3'hz;
ARBURST_IN_r <= 2'hz;
AR_SET_CMD_r <= 1'b0;
LAST_ARID <= id;
NUM_WORDS_EXPECTED <= NUM_WORDS_EXPECTED+len+1;
end
endtask
includes/x393_tasks_afi.vh 0 → 100644
View file @ e4816b14
/*******************************************************************************
* File: x393_tasks_afi.vh
* Date:2015-02-07
* Author: Andrey Filippov
* Description: Simulation tasks for the AXI_HP (AFI)
*
* Copyright (c) 2015 Elphel, Inc.
* x393_tasks_afi.vh is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* x393_tasks_afi.vh is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
task membridge_setup;
input [28:0] len64; // number of 64-bit words to transfer
input [28:0] width64; // frame width in 64-bit words
input [28:0] start64; // relative start address of the transfer (set to 0 when writing lo_addr64)
input [28:0] lo_addr64; // low address of the system memory range, in 64-bit words
input [28:0] size64; // size of the system memory range in 64-bit words
begin
write_contol_register(MEMBRIDGE_ADDR + MEMBRIDGE_LO_ADDR64, {3'b0,lo_addr64});
write_contol_register(MEMBRIDGE_ADDR + MEMBRIDGE_SIZE64, {3'b0,size64});
write_contol_register(MEMBRIDGE_ADDR + MEMBRIDGE_START64, {3'b0,start64});
write_contol_register(MEMBRIDGE_ADDR + MEMBRIDGE_LEN64, {3'b0,len64});
write_contol_register(MEMBRIDGE_ADDR + MEMBRIDGE_WIDTH64, {3'b0,width64});
end
endtask
task membridge_start;
input continue; // 0 start from start64, 1 - continue from where it was
begin
write_contol_register(MEMBRIDGE_ADDR + MEMBRIDGE_CTRL, {29'b0,continue,2'b11});
end
endtask
task membridge_en; // SuppressThisWarning VEditor - may be unused
input en; // not needed to start, pauses axi if set to 0 whil running, resets "done" status bit
begin
write_contol_register(MEMBRIDGE_ADDR + MEMBRIDGE_CTRL, {31'b0,en});
end
endtask
task afi_setup;
input [1:0] port_num;
begin
afi_write_reg(port_num, 'h0, 0); // AFI_RDCHAN_CTRL
afi_write_reg(port_num, 'h4, 7); // AFI_RDCHAN_ISSUINGCAP
afi_write_reg(port_num, 'h8, 0); // AFI_RDQOS
//afi_write_reg(port_num, 'hc, 0); // AFI_RDDATAFIFO_LEVEL
//afi_write_reg(port_num, 'h10, 0); // AFI_RDDEBUG
afi_write_reg(port_num, 'h14, 'hf00); // AFI_WRCHAN_CTRL
afi_write_reg(port_num, 'h18, 7); // AFI_WRCHAN_ISSUINGCAP
afi_write_reg(port_num, 'h1c, 0); // AFI_WRQOS
//afi_write_reg(port_num, 'h20, 0); // AFI_WRDATAFIFO_LEVEL
//afi_write_reg(port_num, 'h24, 0); // AFI_WRDEBUG
end
endtask
task afi_write_reg;
input [1:0] port_num;
input integer rel_baddr; // relative byte address
input [31:0] data;
begin
ps_write_reg(32'hf8008000+ (port_num << 12) + (rel_baddr & 'hfffffffc), data);
end
endtask
task afi_read_reg; // SuppressThisWarning VEditor - may be unused
input [1:0] port_num;
input integer rel_baddr; // relative byte address
input verbose;
begin
ps_read_reg(32'hf8008000+ (port_num << 12) + (rel_baddr & 'hfffffffc), verbose);
end
endtask
task ps_write_reg;
input [31:0] ps_reg_addr;
input [31:0] ps_reg_data;
begin
@(posedge HCLK);
PS_REG_ADDR <= ps_reg_addr;
PS_REG_DIN <= ps_reg_data;
PS_REG_WR <= 1'b1;
@(posedge HCLK);
PS_REG_ADDR <= 'bx;
PS_REG_DIN <= 'bx;
PS_REG_WR <= 1'b0;
end
endtask
task ps_read_reg;
input [31:0] ps_reg_addr;
input verbose;
begin
@(posedge HCLK);
PS_REG_ADDR <= ps_reg_addr;
PS_REG_RD <= 1'b1;
@(posedge HCLK);
PS_REG_ADDR <= 'bx;
PS_REG_DIN <= 'bx;
PS_REG_WR <= 1'b0;
@(negedge HCLK);
if (verbose) begin
$display("ps_read_reg(%x) -> %x @%t",ps_reg_addr,PS_RDATA,$time);
end
end
endtask
\ No newline at end of file
includes/x393_tasks_mcntrl_buffers.vh 0 → 100644
View file @ e4816b14
/*******************************************************************************
* File: x393_tasks_mcntrl_buffers.vh
* Date:2015-02-07
* Author: Andrey Filippov
* Description: Simulation tasks for software reading/writing (with test patterns)
* of the block buffers.
*
* Copyright (c) 2015 Elphel, Inc.
* x393_tasks_mcntrl_buffers.vh is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* x393_tasks_mcntrl_buffers.vh is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
/*
task write_block_scanline_chn; // S uppressThisWarning VEditor : may be unused
input integer chn; // buffer channel
input [1:0] page;
// input integer num_words; // number of words to write (will be rounded up to multiple of 16)
input [NUM_XFER_BITS:0] num_bursts; // number of 8-bursts to write (will be rounded up to multiple of 16)
input integer startX;
input integer startY;
reg [29:0] start_addr;
begin
$display("====== write_block_scanline_chn:%d page: %x X=0x%x Y=0x%x num=%d @%t", chn, page, startX, startY,num_words, $time);
case (chn)
1: start_addr=MCONTR_BUF0_WR_ADDR + (page << 8);
3: start_addr=MCONTR_BUF3_WR_ADDR + (page << 8);
default: begin
$display("**** ERROR: Invalid channel for write_block_scanline_chn = %d @%t", chn, $time);
start_addr = MCONTR_BUF0_WR_ADDR+ (page << 8);
end
endcase
// write_block_incremtal (start_addr, num_words, (startX<<2) + (startY<<16)); // 1 of startX is 8x16 bit, 16 bytes or 4 32-bit words
write_block_incremtal (start_addr, num_bursts << 2, (startX<<2) + (startY<<16)); // 1 of startX is 8x16 bit, 16 bytes or 4 32-bit words
end
endtask
*/
task write_block_incremtal;
input [29:0] start_word_address;
input integer num_words; // number of words to write (will be rounded up to multiple of 16)
input integer start_value;
integer i, j;
begin
$display("**** write_block_buf @%t", $time);
for (i = 0; i < num_words; i = i + 16) begin
axi_write_addr_data(
i, // id
{start_word_address,2'b0}+( i << 2),
start_value+i,
4'hf, // len
1, // burst type - increment
1'b1, // data_en
4'hf, // wstrb
1'b0 // last
);
// $display("+Write block data (addr:data): 0x%x:0x%08x @%t", i, i | (((i + 7) & 'hff) << 8) | (((i + 23) & 'hff) << 16) | (((i + 31) & 'hff) << 24), $time);
$display("+Write block incremental (addr:data): 0x%x:0x%08x @%t", i, start_value+i, $time);
for (j = 1; j < 16; j = j + 1) begin
axi_write_data(
i, // id
start_value+i+j,
4'hf, // wstrb
(j == 15) ? 1'b1 : 1'b0 // last
);
$display(" Write block incremental (addr:data): 0x%08x:0x%x @%t", (i + j), start_value+i+j, $time);
end
end
end
endtask
task write_block_buf_chn; // S uppressThisWarning VEditor : may be unused
input integer chn; // buffer channel
input [1:0] page;
input integer num_words; // number of words to write (will be rounded up to multiple of 16)
reg [29:0] start_addr;
begin
case (chn)
0: start_addr=MCONTR_BUF0_WR_ADDR + (page << 8);
// 1: start_addr=MCONTR_BUF1_WR_ADDR + (page << 8);
2: start_addr=MCONTR_BUF2_WR_ADDR + (page << 8);
3: start_addr=MCONTR_BUF3_WR_ADDR + (page << 8);
4: start_addr=MCONTR_BUF4_WR_ADDR + (page << 8);
default: begin
$display("**** ERROR: Invalid channel (not 0,2,3,4) for write buffer = %d @%t", chn, $time);
start_addr = MCONTR_BUF0_WR_ADDR+ (page << 8);
end
endcase
write_block_buf (start_addr, num_words);
end
endtask
task write_block_buf;
input [29:0] start_word_address;
input integer num_words; // number of words to write (will be rounded up to multiple of 16)
integer i, j;
begin
$display("**** write_block_buf @%t", $time);
for (i = 0; i < num_words; i = i + 16) begin
axi_write_addr_data(
i, // id
{start_word_address,2'b0}+( i << 2),
// (MCONTR_BUF0_WR_ADDR + (page <<8)+ i) << 2, // addr
i | (((i + 7) & 'hff) << 8) | (((i + 23) & 'hff) << 16) | (((i + 31) & 'hff) << 24),
4'hf, // len
1, // burst type - increment
1'b1, // data_en
4'hf, // wstrb
1'b0 // last
);
$display("+Write block data (addr:data): 0x%x:0x%08x @%t", i, i | (((i + 7) & 'hff) << 8) | (((i + 23) & 'hff) << 16) | (((i + 31) & 'hff) << 24), $time);
for (j = 1; j < 16; j = j + 1) begin
axi_write_data(
i, // id
(i + j) | ((((i + j) + 7) & 'hff) << 8) | ((((i + j) + 23) & 'hff) << 16) | ((((i + j) + 31) & 'hff) << 24),
4'hf, // wstrb
(j == 15) ? 1'b1 : 1'b0 // last
);
$display(" Write block data (addr:data): 0x%08x:0x%x @%t", (i + j),
(i + j) | ((((i + j) + 7) & 'hff) << 8) | ((((i + j) + 23) & 'hff) << 16) | ((((i + j) + 31) & 'hff) << 24), $time);
end
end
end
endtask
// read memory
task read_block_buf_chn; // S uppressThisWarning VEditor : may be unused
// input integer chn; // buffer channel
input [3:0] chn; // buffer channel
input [1:0] page;
input integer num_read; // number of words to read (will be rounded up to multiple of 16)
input wait_done;
reg [29:0] start_addr;
begin
case (chn)
0: start_addr=MCONTR_BUF0_RD_ADDR + (page << 8);
2: start_addr=MCONTR_BUF2_RD_ADDR + (page << 8);
3: start_addr=MCONTR_BUF3_RD_ADDR + (page << 8);
4: start_addr=MCONTR_BUF4_RD_ADDR + (page << 8);
default: begin
$display("**** ERROR: Invalid channel (not 0,2,3,4) for read buffer = %d @%t", chn, $time);
start_addr = 30'b0+ (page << 8);
end
endcase
read_block_buf (start_addr, num_read, wait_done);
end
endtask
task read_block_buf;
input [29:0] start_word_address;
input integer num_read; // number of words to read (will be rounded up to multiple of 16)
input wait_done;
integer i; //,j;
begin
wait (~rstb);
SIMUL_AXI_FULL<=1'b0;
$display("**** read_block_buf @%t", $time);
axi_set_rd_lag(0);
for (i = 0; i < num_read; i = i + 16) begin
wait(arready);
// $display ("read_block_buf (0x%x) @%t",i,$time);
axi_read_addr(
i, // id
{start_word_address,2'b0}+( i << 2), // addr
4'hf, // len
1 // burst type - increment
);
end
if (wait_done) begin
// wait (AXI_RD_EMPTY);
wait_read_queue_empty;
end
end
endtask
includes/x393_tasks_mcntrl_en_dis_priority.vh 0 → 100644
View file @ e4816b14
/*******************************************************************************
* File: x393_tasks_mcntrl_en_dis_priority.vh
* Date:2015-02-07
* Author: Andrey Filippov
* Description: Simulation tasks for software reading/writing (with test patterns)
* of the block buffers.
*
* Copyright (c) 2015 Elphel, Inc.
* x393_tasks_mcntrl_en_dis_priority.vh is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* x393_tasks_mcntrl_en_dis_priority.vh is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
task enable_cmda;
input en;
begin
write_contol_register(MCONTR_PHY_0BIT_ADDR + MCONTR_PHY_0BIT_CMDA_EN + en, 0);
end
endtask
task enable_cke;
input en;
begin
write_contol_register(MCONTR_PHY_0BIT_ADDR + MCONTR_PHY_0BIT_CKE_EN + en, 0);
end
endtask
task activate_sdrst;
input en;
begin
write_contol_register(MCONTR_PHY_0BIT_ADDR + MCONTR_PHY_0BIT_SDRST_ACT + en, 0);
end
endtask
task enable_refresh;
input en;
begin
write_contol_register(MCONTR_TOP_0BIT_ADDR + MCONTR_TOP_0BIT_REFRESH_EN + en, 0);
end
endtask
task enable_memcntrl;
input en;
begin
write_contol_register(MCONTR_TOP_0BIT_ADDR + MCONTR_TOP_0BIT_MCONTR_EN + en, 0);
end
endtask
task enable_memcntrl_channels;
input [15:0] chnen; // bit-per-channel, 1 - enable;
begin
ENABLED_CHANNELS = chnen; // currently enabled memory channels
write_contol_register(MCONTR_TOP_16BIT_ADDR + MCONTR_TOP_16BIT_CHN_EN, {16'b0,chnen});
end
endtask
task enable_memcntrl_en_dis;
input [3:0] chn;
input en;
begin
if (en) begin
ENABLED_CHANNELS = ENABLED_CHANNELS | (1<<chn);
end else begin
ENABLED_CHANNELS = ENABLED_CHANNELS & ~(1<<chn);
end
write_contol_register(MCONTR_TOP_16BIT_ADDR + MCONTR_TOP_16BIT_CHN_EN, {16'b0,ENABLED_CHANNELS});
end
endtask
task configure_channel_priority;
input [ 3:0] chn;
input [15:0] priority; // (higher is more important)
begin
write_contol_register(MCONTR_ARBIT_ADDR + chn, {16'b0,priority});
end
endtask
includes/x393_tasks_mcntrl_timing.vh 0 → 100644
View file @ e4816b14
/*******************************************************************************
* File: x393_tasks_mcntrl_timing.vh
* Date:2015-02-07
* Author: Andrey Filippov
* Description: Simulation tasks for programming I/O delays and other timing
* parameters in the memory controller
*
* Copyright (c) 2015 Elphel, Inc.
* x393_tasks_mcntrl_timing.vh is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* x393_tasks_mcntrl_timing.vh is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
task axi_set_same_delays; //SuppressThisWarning VEditor : may be unused
input [7:0] dq_idelay;
input [7:0] dq_odelay;
input [7:0] dqs_idelay;
input [7:0] dqs_odelay;
input [7:0] dm_odelay;
input [7:0] cmda_odelay;
begin
$display("SET DELAYS(0x%x,0x%x,0x%x,0x%x,0x%x,0x%x) @ %t",
dq_idelay,dq_odelay,dqs_idelay,dqs_odelay,dm_odelay,cmda_odelay,$time);
axi_set_dq_idelay(dq_idelay);
axi_set_dq_odelay(dq_odelay);
axi_set_dqs_idelay(dqs_idelay);
axi_set_dqs_odelay(dqs_odelay);
axi_set_dm_odelay(dm_odelay);
axi_set_cmda_odelay(cmda_odelay);
end
endtask
task axi_set_dqs_odelay_nominal; //SuppressThisWarning VEditor : may be unused
begin
$display("axi_set_dqs_odelay_nominal(0x%x,0x%x) @ %t",
(DLY_LANE0_ODELAY >> (8<<3)) & 32'hff,
(DLY_LANE1_ODELAY >> (8<<3)) & 32'hff,
$time);
// axi_set_dqs_idelay(
write_contol_register(LD_DLY_LANE0_ODELAY + 8, (DLY_LANE0_ODELAY >> (8<<3)) & 32'hff);
write_contol_register(LD_DLY_LANE1_ODELAY + 8, (DLY_LANE1_ODELAY >> (8<<3)) & 32'hff);
write_contol_register(DLY_SET,0);
end
endtask
task axi_set_dqs_idelay_nominal; //SuppressThisWarning VEditor : may be unused
begin
// axi_set_dqs_idelay(
write_contol_register(LD_DLY_LANE0_IDELAY + 8, (DLY_LANE0_IDELAY >> (8<<3)) & 32'hff);
write_contol_register(LD_DLY_LANE1_IDELAY + 8, (DLY_LANE1_IDELAY >> (8<<3)) & 32'hff);
write_contol_register(DLY_SET,0);
end
endtask
task axi_set_dqs_idelay_wlv; //SuppressThisWarning VEditor : may be unused
begin
write_contol_register(LD_DLY_LANE0_IDELAY + 8, DLY_LANE0_DQS_WLV_IDELAY);
write_contol_register(LD_DLY_LANE1_IDELAY + 8, DLY_LANE1_DQS_WLV_IDELAY);
write_contol_register(DLY_SET,0);
end
endtask
task axi_set_delays; // set all individual delays
integer i;
begin
$display("axi_set_delays @ %t",$time);
for (i=0;i<10;i=i+1) begin
write_contol_register(LD_DLY_LANE0_ODELAY + i, (DLY_LANE0_ODELAY >> (i<<3)) & 32'hff);
end
for (i=0;i<9;i=i+1) begin
write_contol_register(LD_DLY_LANE0_IDELAY + i, (DLY_LANE0_IDELAY >> (i<<3)) & 32'hff);
end
for (i=0;i<10;i=i+1) begin
write_contol_register(LD_DLY_LANE1_ODELAY + i, (DLY_LANE1_ODELAY >> (i<<3)) & 32'hff);
end
for (i=0;i<9;i=i+1) begin
write_contol_register(LD_DLY_LANE1_IDELAY + i, (DLY_LANE1_IDELAY >> (i<<3)) & 32'hff);
end
for (i=0;i<32;i=i+1) begin
write_contol_register(LD_DLY_CMDA + i, (DLY_CMDA >> (i<<3)) & 32'hff);
end
// write_contol_register(DLY_SET,0);
axi_set_phase(DLY_PHASE); // also sets all delays
end
endtask
task axi_get_delays; // set all individual delays
integer i;
begin
$display("axi_get_delays @ %t",$time);
for (i=0;i<10;i=i+1) begin
read_contol_register(LD_DLY_LANE0_ODELAY + i);
end
for (i=0;i<9;i=i+1) begin
read_contol_register(LD_DLY_LANE0_IDELAY + i);
end
for (i=0;i<10;i=i+1) begin
read_contol_register(LD_DLY_LANE1_ODELAY + i);
end
for (i=0;i<9;i=i+1) begin
read_contol_register(LD_DLY_LANE1_IDELAY + i);
end
for (i=0;i<32;i=i+1) begin
read_contol_register(LD_DLY_CMDA + i);
end
read_contol_register(LD_DLY_PHASE);
end
endtask
task axi_set_dq_idelay; // sets same delay to all dq idelay
input [7:0] delay;
begin
$display("SET DQ IDELAY=0x%x @ %t",delay,$time);
axi_set_multiple_delays(LD_DLY_LANE0_IDELAY, 8, delay);
axi_set_multiple_delays(LD_DLY_LANE1_IDELAY, 8, delay);
write_contol_register(DLY_SET,0); // set all delays
end
endtask
task axi_set_dq_odelay;
input [7:0] delay;
begin
$display("SET DQ ODELAY=0x%x @ %t",delay,$time);
axi_set_multiple_delays(LD_DLY_LANE0_ODELAY, 8, delay);
axi_set_multiple_delays(LD_DLY_LANE1_ODELAY, 8, delay);
write_contol_register(DLY_SET,0); // set all delays
end
endtask
task axi_set_dqs_idelay;
input [7:0] delay;
begin
$display("SET DQS IDELAY=0x%x @ %t",delay,$time);
axi_set_multiple_delays(LD_DLY_LANE0_IDELAY + 8, 1, delay);
axi_set_multiple_delays(LD_DLY_LANE1_IDELAY + 8, 1, delay);
write_contol_register(DLY_SET,0); // set all delays
end
endtask
task axi_set_dqs_odelay;
input [7:0] delay;
begin
$display("SET DQS ODELAY=0x%x @ %t",delay,$time);
axi_set_multiple_delays(LD_DLY_LANE0_ODELAY + 8, 1, delay);
axi_set_multiple_delays(LD_DLY_LANE1_ODELAY + 8, 1, delay);
write_contol_register(DLY_SET,0); // set all delays
end
endtask
task axi_set_dm_odelay;
input [7:0] delay;
begin
$display("SET DQM IDELAY=0x%x @ %t",delay,$time);
axi_set_multiple_delays(LD_DLY_LANE0_ODELAY + 9, 1, delay);
axi_set_multiple_delays(LD_DLY_LANE1_ODELAY + 9, 1, delay);
write_contol_register(DLY_SET,0); // set all delays
end
endtask
task axi_set_cmda_odelay;
input [7:0] delay;
begin
$display("SET COMMAND and ADDRESS ODELAY=0x%x @ %t",delay,$time);
axi_set_multiple_delays(LD_DLY_CMDA, 32, delay);
write_contol_register(DLY_SET,0); // set all delays
end
endtask
task axi_set_multiple_delays;
input [29:0] reg_addr;
input integer number;
input [7:0] delay;
integer i;
begin
for (i=0;i<number;i=i+1) begin
write_contol_register(reg_addr + i, {24'b0,delay}); // control regiter address
end
end
endtask
task axi_set_phase;
input [PHASE_WIDTH-1:0] phase;
begin
$display("SET CLOCK PHASE to 0x%x @ %t",phase,$time);
write_contol_register(LD_DLY_PHASE, {{(32-PHASE_WIDTH){1'b0}},phase}); // control regiter address
write_contol_register(DLY_SET,0);
target_phase <= phase;
end
endtask
task axi_set_wbuf_delay;
input [3:0] delay;
begin
$display("SET WBUF DELAY to 0x%x @ %t",delay,$time);
write_contol_register(MCONTR_PHY_16BIT_ADDR+MCONTR_PHY_16BIT_WBUF_DELAY, {28'h0, delay});
end
endtask
// set dq /dqs tristate on/off patterns
task axi_set_tristate_patterns;
begin
$display("SET TRISTATE PATTERNS @ %t",$time);
write_contol_register(MCONTR_PHY_16BIT_ADDR +MCONTR_PHY_16BIT_PATTERNS_TRI,
{16'h0, DQSTRI_LAST, DQSTRI_FIRST, DQTRI_LAST, DQTRI_FIRST});
end
endtask
task axi_set_dqs_dqm_patterns;
begin
$display("SET DQS+DQM PATTERNS @ %t",$time);
// set patterns for DM (always 0) and DQS - always the same (may try different for write lev.)
write_contol_register(MCONTR_PHY_16BIT_ADDR + MCONTR_PHY_16BIT_PATTERNS,
32'h0055);
end
endtask
includes/x393_tasks_pio_sequences.vh 0 → 100644
View file @ e4816b14
/*******************************************************************************
* File: x393_tasks_pio_sequences.vh
* Date:2015-02-07
* Author: Andrey Filippov
* Description: Simulation tasks for programming memory transaction
* sequences (controlles by PS)
*
* Copyright (c) 2015 Elphel, Inc.
* x393_tasks_pio_sequences.vh is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* x393_tasks_pio_sequences.vh is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
task enable_reset_ps_pio; // control reset and enable of the PS PIO channel;
input en;
input rst;
begin
write_contol_register(MCNTRL_PS_ADDR + MCNTRL_PS_EN_RST, {30'b0,en,~rst});
end
endtask
task set_read_block;
input [ 2:0] ba;
input [14:0] ra;
input [ 9:0] ca;
input sel;
reg [29:0] cmd_addr;
reg [31:0] data;
integer i;
begin
cmd_addr <= MCONTR_CMD_WR_ADDR + READ_BLOCK_OFFSET;
// activate
// addr bank RCW ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD NOP, B_RST
data <= func_encode_cmd( ra[14:0], ba[2:0], 4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// see if pause is needed . See when buffer read should be started - maybe before WR command
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// first read
// read
// addr bank RCW ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD NOP, B_RST
data <= func_encode_cmd( {5'b0,ca[9:0]}, ba[2:0], 2, 0, 0, sel, 0, 0, 0, 1, 1, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// nop
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 0, 0, ba[2:0], 0, 0, sel, 0, 0, 0, 1, 1, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
//repeat remaining reads
for (i=1;i<64;i=i+1) begin
// read
// addr bank RCW ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD NOP, B_RST
data <= func_encode_cmd({5'b0,ca[9:0]}+(i<<3),ba[2:0],2, 0, 0, 1, 0, 0, 0, 1, 1, 0, 1, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
end
// nop - all 3 below are the same? - just repeat?
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 0, 0, ba[2:0], 0, 0, sel, 0, 0, 0, 1, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// nop
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 0, 0, ba[2:0], 0, 0, sel, 0, 0, 0, 1, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// nop
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 0, 0, ba[2:0], 0, 0, sel, 0, 0, 0, 1, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// tRTP = 4*tCK is already satisfied, no skip here
// precharge, end of a page (B_RST)
// addr bank RCW ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD NOP, B_RST
data <= func_encode_cmd( ra[14:0], ba[2:0], 5, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 2, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// Turn off DCI, set DONE
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
end
endtask
task set_write_block;
input[2:0]ba;
input[14:0]ra;
input[9:0]ca;
input sel;
reg[29:0] cmd_addr;
reg[31:0] data;
integer i;
begin
cmd_addr <= MCONTR_CMD_WR_ADDR + WRITE_BLOCK_OFFSET;
// activate
// addr bank RCW ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD NOP, B_RST
data <= func_encode_cmd( ra[14:0], ba[2:0], 4, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// see if pause is needed . See when buffer read should be started - maybe before WR command
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0); // tRCD - 2 read bufs
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// first write, 3 rd_buf
// write
// addr bank RCW ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD NOP, B_RST
data <= func_encode_cmd( {5'b0,ca[9:0]}, ba[2:0], 3, 1, 0, sel, 0, 0, 0, 0, 0, 1, 0, 0); // B_RD moved 1 cycle earlier
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// nop 4-th rd_buf
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
// data <= func_encode_skip( 0, 0, ba[2:0], 1, 0, 1, 1, 1, 0, 1, 0, 1, 0);
// data <= func_encode_skip( 0, 0, ba[2:0], 1, 0, 0, 1, 1, 0, 0, 0, 1, 0);
data <= func_encode_skip( 0, 0, ba[2:0], 1, 0, 0, 0, 0, 0, 0, 0, 1, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
//repeat remaining writes
for (i = 1; i < 62; i = i + 1) begin
// write
// add bank RCW ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD NOP, B_RST
data <= func_encode_cmd( {5'b0,ca[9:0]}+(i<<3),ba[2:0],3, 1, 0, sel, 1, 1, 1, 0, 0, 1, 1, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
end
// add bank RCW ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD NOP, B_RST
data <= func_encode_cmd( {5'b0,ca[9:0]}+(62<<3),ba[2:0], 3, 1, 0, sel, 1, 1, 1, 0, 0, 1, 0, 0); // write w/o nop
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// nop
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 0, 0, ba[2:0], 1, 0, sel, 1, 1, 1, 0, 0, 0, 0); // nop with buffer read off
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// One last write pair w/o buffer
// add bank RCW ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD NOP, B_RST
data <= func_encode_cmd( {5'b0,ca[9:0]}+(63<<3),ba[2:0], 3, 1, 0, sel, 1, 1, 1, 0, 0, 0, 1, 0); // write with nop
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// nop
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 0, 0, ba[2:0], 1, 0, 0, 1, 1, 1, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// nop
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 0, 0, ba[2:0], 1, 0, 0, 1, 1, 1, 0, 0, 0, 1); // removed B_RD 1 cycle earlier
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// nop
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 0, 0, ba[2:0], 1, 0, 0, 1, 1, 1, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// ODT off, it has latency
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 2, 0, ba[2:0], 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// precharge, ODT off
// addr bank RCW ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD NOP, B_RST
data <= func_encode_cmd( ra[14:0], ba[2:0], 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 2, 0, ba[2:0], 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// Finalize, set DONE
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
end
endtask
// Set MR3, read nrep*8 words, save to buffer (port0). No ACTIVATE/PRECHARGE are needed/allowed
task set_read_pattern;
input integer nrep;
// input [ 2:0] ba;
// input [14:0] ra;
// input [ 9:0] ca;
reg[29:0] cmd_addr;
reg[31:0] data;
reg[17:0] mr3_norm;
reg[17:0] mr3_patt;
integer i;
begin
cmd_addr <= MCONTR_CMD_WR_ADDR + READ_PATTERN_OFFSET;
mr3_norm <= ddr3_mr3(
1'h0, // mpr; // MPR mode: 0 - normal, 1 - dataflow from MPR
2'h0); // [1:0] mpr_rf; // MPR read function: 2'b00: predefined pattern 0101...
mr3_patt <= ddr3_mr3(
1'h1, // mpr; // MPR mode: 0 - normal, 1 - dataflow from MPR
2'h0); // [1:0] mpr_rf; // MPR read function: 2'b00: predefined pattern 0101...
@(posedge CLK);
// Set pattern mode
// addr bank RCW ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD NOP, B_RST
data <= func_encode_cmd(mr3_patt[14:0], mr3_patt[17:15], 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0); // tMOD
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// first read
// read
// addr bank RCW ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD NOP, B_RST
data <= func_encode_cmd( 0, 0, 2, 0, 0, 1, 0, 0, 0, 1, 1, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// nop (combine with previous?)
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 1, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
//repeat remaining reads
for (i = 1; i < nrep; i = i + 1) begin
// addr bank RCW ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD NOP, B_RST
data <= func_encode_cmd( 0, 0, 2, 0, 0, 1, 0, 0, 0, 1, 1, 0, 1, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
end
// nop - all 3 below are the same? - just repeat?
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0); // was BUF WR
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// nop
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// nop
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// nop, no write buffer - next page
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 1);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 1, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// Turn off read pattern mode
// addr bank RCW ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD NOP, B_RST
data <= func_encode_cmd(mr3_norm[14:0], mr3_norm[17:15], 7, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// tMOD (keep DCI enabled)
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 5, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// Turn off DCI
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// Finalize (set DONE)
data <= func_encode_skip( 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
end
endtask
task set_write_lev;
input[CMD_PAUSE_BITS-1:0]nrep;
reg[17:0] mr1_norm;
reg[17:0] mr1_wlev;
reg[29:0] cmd_addr;
reg[31:0] data;
reg[CMD_PAUSE_BITS-1:0] dqs_low_rpt;
reg[CMD_PAUSE_BITS-1:0] nrep_minus_1;
begin
dqs_low_rpt <= 8;
nrep_minus_1 <= nrep - 1;
mr1_norm <= ddr3_mr1(
1'h0, // qoff; // output enable: 0 - DQ, DQS operate in normal mode, 1 - DQ, DQS are disabled
1'h0, // tdqs; // termination data strobe (for x8 devices) 0 - disabled, 1 - enabled
3'h2, // [2:0] rtt; // on-die termination resistance: // 3'b010 - RZQ/2 (120 Ohm)
1'h0, // wlev; // write leveling
2'h0, // ods; // output drive strength: // 2'b00 - RZQ/6 - 40 Ohm
2'h0, // [1:0] al; // additive latency: 2'b00 - disabled (AL=0)
1'b0); // dll; // 0 - DLL enabled (normal), 1 - DLL disabled
mr1_wlev <= ddr3_mr1(
1'h0, // qoff; // output enable: 0 - DQ, DQS operate in normal mode, 1 - DQ, DQS are disabled
1'h0, // tdqs; // termination data strobe (for x8 devices) 0 - disabled, 1 - enabled
3'h2, // [2:0] rtt; // on-die termination resistance: // 3'b010 - RZQ/2 (120 Ohm)
1'h1, // wlev; // write leveling
2'h0, // ods; // output drive strength: // 2'b00 - RZQ/6 - 40 Ohm
2'h0, // [1:0] al; // additive latency: 2'b00 - disabled (AL=0)
1'b0); // dll; // 0 - DLL enabled (normal), 1 - DLL disabled
cmd_addr <= MCONTR_CMD_WR_ADDR + WRITELEV_OFFSET;
// Enter write leveling mode
@(posedge CLK)
// addr bank RCW ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD NOP, B_RST
data <= func_encode_cmd(mr1_wlev[14:0], mr1_wlev[17:15], 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 13, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0); // tWLDQSEN=25tCK
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// enable DQS output, keep it low (15 more tCK for the total of 40 tCK
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip(dqs_low_rpt, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// Toggle DQS as needed for write leveling, write to buffer
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip(nrep_minus_1,0, 0, 1, 0, 0, 0, 1, 1, 1, 1, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// continue toggling (5 times), but disable writing to buffer (used same wbuf latency as for read)
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 4, 0, 0, 1, 0, 0, 0, 1, 1, 1, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// Keep DCI (but not ODT) active ODT should be off befor MRS
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 2, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// exit write leveling mode, ODT off, DCI off
// addr bank RCW ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD NOP, B_RST
data <= func_encode_cmd(mr1_norm[14:0], mr1_norm[17:15], 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0); // tMOD
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// Finalize. See if DONE can be combined with B_RST, if not - insert earlier
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1); // can DONE be combined with B_RST?
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
end
endtask
task set_refresh;
input[9:0]t_rfc; // =50 for tCK=2.5ns
input[7:0]t_refi; // 48/97 for normal, 8 - for simulation
reg[29:0] cmd_addr;
reg[31:0] data;
begin
cmd_addr <= MCONTR_CMD_WR_ADDR + REFRESH_OFFSET;
@(posedge CLK)
// addr bank RCW ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD NOP, B_RST
data <= func_encode_cmd( 0, 0, 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// =50 tREFI=260 ns before next ACTIVATE or REFRESH, @2.5ns clock, @5ns cycle
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( t_rfc, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// Ready for normal operation
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// write_contol_register(DLY_SET,0);
write_contol_register(MCONTR_TOP_16BIT_ADDR + MCONTR_TOP_16BIT_REFRESH_ADDRESS, REFRESH_OFFSET);
write_contol_register(MCONTR_TOP_16BIT_ADDR + MCONTR_TOP_16BIT_REFRESH_PERIOD, {24'h0,t_refi});
// enable refresh - should it be done here?
// write_contol_register(MCONTR_PHY_0BIT_ADDR + MCONTR_TOP_0BIT_REFRESH_EN + 1, 0);
end
endtask
task set_mrs; // will also calibrate ZQ
input reset_dll;
reg[17:0] mr0;
reg[17:0] mr1;
reg[17:0] mr2;
reg[17:0] mr3;
reg[29:0] cmd_addr;
reg[31:0] data;
begin
mr0 <= ddr3_mr0(
1'h0, // pd; // precharge power down 0 - dll off (slow exit), 1 - dll on (fast exit)
3'h2, // [2:0] wr; // write recovery (encode ceil(tWR/tCK)) // 3'b010: 6
reset_dll, // dll_rst; // 1 - dll reset (self clearing bit)
4'h4, // [3:0] cl; // CAS latency: // 0100: 6 (time 15ns)
1'h0, // bt; // read burst type: 0 sequential (nibble), 1 - interleave
2'h0); // [1:0] bl; // burst length: // 2'b00 - fixed BL8
mr1 <= ddr3_mr1(
1'h0, // qoff; // output enable: 0 - DQ, DQS operate in normal mode, 1 - DQ, DQS are disabled
1'h0, // tdqs; // termination data strobe (for x8 devices) 0 - disabled, 1 - enabled
3'h2, // [2:0] rtt; // on-die termination resistance: // 3'b010 - RZQ/2 (120 Ohm)
1'h0, // wlev; // write leveling
2'h0, // ods; // output drive strength: // 2'b00 - RZQ/6 - 40 Ohm
2'h0, // [1:0] al; // additive latency: 2'b00 - disabled (AL=0)
1'b0); // dll; // 0 - DLL enabled (normal), 1 - DLL disabled
mr2 <= ddr3_mr2(
2'h0, // [1:0] rtt_wr; // Dynamic ODT : // 2'b00 - disabled, 2'b01 - RZQ/4 = 60 Ohm, 2'b10 - RZQ/2 = 120 Ohm
1'h0, // srt; // Self-refresh temperature 0 - normal (0-85C), 1 - extended (<=95C)
1'h0, // asr; // Auto self-refresh 0 - disabled (manual), 1 - enabled (auto)
3'h0); // [2:0] cwl; // CAS write latency:3'b000 5CK (tCK >= 2.5ns), 3'b001 6CK (1.875ns <= tCK < 2.5ns)
mr3 <= ddr3_mr3(
1'h0, // mpr; // MPR mode: 0 - normal, 1 - dataflow from MPR
2'h0); // [1:0] mpr_rf; // MPR read function: 2'b00: predefined pattern 0101...
cmd_addr <= MCONTR_CMD_WR_ADDR + INITIALIZE_OFFSET;
@(posedge CLK)
$display("mr0=0x%x", mr0);
$display("mr1=0x%x", mr1);
$display("mr2=0x%x", mr2);
$display("mr3=0x%x", mr3);
// addr bank RCW ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD NOP, B_RST
data <= func_encode_cmd(mr2[14:0], mr2[17:15], 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// addr bank RCW ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD NOP, B_RST
data <= func_encode_cmd(mr3[14:0], mr3[17:15], 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// addr bank RCW ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD NOP, B_RST
data <= func_encode_cmd(mr1[14:0], mr1[17:15], 7, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0); // SEL==1 - just testing?
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// addr bank RCW ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD NOP, B_RST
data <= func_encode_cmd(mr0[14:0], mr0[17:15], 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// encode ZQCL:
// addr bank RCW ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD NOP, B_RST
data <= func_encode_cmd(15'h400, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// 512 clock cycles after ZQCL
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 256, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
// sequence done bit, skip length is ignored
// skip done bank ODT CKE SEL DQEN DQSEN DQSTGL DCI B_WR B_RD B_RST
data <= func_encode_skip( 10, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
@(posedge CLK) axi_write_single_w(cmd_addr, data); cmd_addr <= cmd_addr + 1;
end
endtask
function [ADDRESS_NUMBER+2:0] ddr3_mr0;
input pd; // precharge power down 0 - dll off (slow exit), 1 - dll on (fast exit)
input [2:0] wr; // write recovery:
// 3'b000: 16
// 3'b001: 5
// 3'b010: 6
// 3'b011: 7
// 3'b100: 8
// 3'b101: 10
// 3'b110: 12
// 3'b111: 14
input dll_rst; // 1 - dll reset (self clearing bit)
input [3:0] cl; // CAS latency (>=15ns):
// 0000: reserved
// 0010: 5
// 0100: 6
// 0110: 7
// 1000: 8
// 1010: 9
// 1100: 10
// 1110: 11
// 0001: 12
// 0011: 13
// 0101: 14
input bt; // read burst type: 0 sequential (nibble), 1 - interleaved
input [1:0] bl; // burst length:
// 2'b00 - fixed BL8
// 2'b01 - 4 or 8 on-the-fly by A12
// 2'b10 - fixed BL4 (chop)
// 2'b11 - reserved
begin
ddr3_mr0 = {
3'b0,
{ADDRESS_NUMBER-13{1'b0}},
pd, // MR0.12
wr, // MR0.11_9
dll_rst, // MR0.8
1'b0, // MR0.7
cl[3:1], // MR0.6_4
bt, // MR0.3
cl[0], // MR0.2
bl[1:0]}; // MR0.1_0
end
endfunction
function [ADDRESS_NUMBER+2:0] ddr3_mr1;
input qoff; // output enable: 0 - DQ, DQS operate in normal mode, 1 - DQ, DQS are disabled
input tdqs; // termination data strobe (for x8 devices) 0 - disabled, 1 - enabled
input [2:0] rtt; // on-die termination resistance:
// 3'b000 - disabled
// 3'b001 - RZQ/4 (60 Ohm)
// 3'b010 - RZQ/2 (120 Ohm)
// 3'b011 - RZQ/6 (40 Ohm)
// 3'b100 - RZQ/12(20 Ohm)
// 3'b101 - RZQ/8 (30 Ohm)
// 3'b11x - reserved
input wlev; // write leveling
input [1:0] ods; // output drive strength:
// 2'b00 - RZQ/6 - 40 Ohm
// 2'b01 - RZQ/7 - 34 Ohm
// 2'b1x - reserved
input [1:0] al; // additive latency:
// 2'b00 - disabled (AL=0)
// 2'b01 - AL=CL-1;
// 2'b10 - AL=CL-2
// 2'b11 - reserved
input dll; // 0 - DLL enabled (normal), 1 - DLL disabled
begin
ddr3_mr1 = {
3'h1,
{ADDRESS_NUMBER-13{1'b0}},
qoff, // MR1.12
tdqs, // MR1.11
1'b0, // MR1.10
rtt[2], // MR1.9
1'b0, // MR1.8
wlev, // MR1.7
rtt[1], // MR1.6
ods[1], // MR1.5
al[1:0], // MR1.4_3
rtt[0], // MR1.2
ods[0], // MR1.1
dll}; // MR1.0
end
endfunction
function [ADDRESS_NUMBER+2:0] ddr3_mr2;
input [1:0] rtt_wr; // Dynamic ODT :
// 2'b00 - disabled
// 2'b01 - RZQ/4 = 60 Ohm
// 2'b10 - RZQ/2 = 120 Ohm
// 2'b11 - reserved
input srt; // Self-refresh temperature 0 - normal (0-85C), 1 - extended (<=95C)
input asr; // Auto self-refresh 0 - disabled (manual), 1 - enabled (auto)
input [2:0] cwl; // CAS write latency:
// 3'b000 5CK ( tCK >= 2.5ns)
// 3'b001 6CK (1.875ns <= tCK < 2.5ns)
// 3'b010 7CK (1.5ns <= tCK < 1.875ns)
// 3'b011 8CK (1.25ns <= tCK < 1.5ns)
// 3'b100 9CK (1.071ns <= tCK < 1.25ns)
// 3'b101 10CK (0.938ns <= tCK < 1.071ns)
// 3'b11x reserved
begin
ddr3_mr2 = {
3'h2,
{ADDRESS_NUMBER-11{1'b0}},
rtt_wr[1:0], // MR2.10_9
1'b0, // MR2.8
srt, // MR2.7
asr, // MR2.6
cwl[2:0], // MR2.5_3
3'b0}; // MR2.2_0
end
endfunction
function [ADDRESS_NUMBER+2:0] ddr3_mr3;
input mpr; // MPR mode: 0 - normal, 1 - dataflow from MPR
input [1:0] mpr_rf; // MPR read function:
// 2'b00: predefined pattern 0101...
// 2'b1x, 2'bx1 - reserved
begin
ddr3_mr3 = {
3'h3,
{ADDRESS_NUMBER-3{1'b0}},
mpr, // MR3.2
mpr_rf[1:0]}; // MR3.1_0
end
endfunction
includes/x393_tasks_ps_pio.vh 0 → 100644
View file @ e4816b14
/*******************************************************************************
* File: x393_tasks_ps_pio.vh
* Date:2015-02-07
* Author: Andrey Filippov
* Description: Simulation tasks for mcntrl_ps_pio module (launching software
* - programmed memory transaction sequences)
*
* Copyright (c) 2015 Elphel, Inc.
* x393_tasks_ps_pio.vh is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* x393_tasks_ps_pio.vh is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
task schedule_ps_pio; // schedule software-control memory operation (may need to check FIFO status first)
input [9:0] seq_addr; // sequence start address
input [1:0] page; // buffer page number
input urgent; // high priority request (only for competion wityh other channels, wiil not pass in this FIFO)
input chn; // channel buffer to use: 0 - memory read, 1 - memory write
input wait_complete; // Do not request a newe transaction from the scheduler until previous memory transaction is finished
begin
// wait_ps_pio_ready(DEFAULT_STATUS_MODE); // wait FIFO not half full
write_contol_register(MCNTRL_PS_ADDR + MCNTRL_PS_CMD, {17'b0,wait_complete,chn,urgent,page,seq_addr});
end
endtask
task wait_ps_pio_ready; // wait PS PIO module can accept comamnds (fifo half empty)
input [1:0] mode;
input sync_seq; // synchronize sequences
begin
wait_status_condition (
MCNTRL_PS_STATUS_REG_ADDR,
MCNTRL_PS_ADDR+MCNTRL_PS_STATUS_CNTRL,
mode,
0,
2 << STATUS_2LSB_SHFT,
0,
sync_seq);
end
endtask
task wait_ps_pio_done; // wait PS PIO module has no pending/running memory transaction
input [1:0] mode;
input sync_seq; // synchronize sequences
begin
wait_status_condition (
MCNTRL_PS_STATUS_REG_ADDR,
MCNTRL_PS_ADDR+MCNTRL_PS_STATUS_CNTRL,
mode,
0,
3 << STATUS_2LSB_SHFT,
0,
sync_seq);
end
endtask
includes/x393_tasks_status.vh 0 → 100644
View file @ e4816b14
/*******************************************************************************
* File: x393_status.vh
* Date:2015-02-07
* Author: Andrey Filippov
* Description: Simulation tasks for the x393 related to status
*
* Copyright (c) 2015 Elphel, Inc.
* x393_status.vh is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* x393_status.vh is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
// CVC bug that is supposed to be already fixed
`ifdef CVC
task wait_status_condition;
input [STATUS_DEPTH-1:0] status_address;
input [29:0] status_control_address;
input [1:0] status_mode;
input [25:0] pattern; // bits as in read registers
input [25:0] mask; // which bits to compare
input invert_match; // 0 - wait until match to pattern (all bits), 1 - wait until no match (any of bits differ)
input wait_seq;
reg match;
reg [5:0] seq_num;
reg [31:0] pattern1;
reg [31:0] mask1;
begin
WAITING_STATUS = 1;
pattern1 = {6'h0,pattern};
mask1 = {6'h0,mask};
for (match=0; !match; match = invert_match ^ (((registered_rdata ^ pattern1) & mask1)==0)) begin
read_status(status_address);
if (wait_seq) begin
seq_num = (registered_rdata[STATUS_SEQ_SHFT+:6] ^ 6'h20)&'h30;
write_contol_register(status_control_address, {24'b0,status_mode,seq_num});
read_status(status_address);
while (((registered_rdata[STATUS_SEQ_SHFT+:6] ^ seq_num) & 6'h30)!=0) begin // match just 2 MSBs
read_status(status_address);
end
end
pattern1 = {6'h0,pattern};
mask1 = {6'h0,mask};
end
WAITING_STATUS = 0;
end
endtask
`else
task wait_status_condition;
input [STATUS_DEPTH-1:0] status_address;
input [29:0] status_control_address;
input [1:0] status_mode;
input [25:0] pattern; // bits as in read registers
input [25:0] mask; // which bits to compare
input invert_match; // 0 - wait until match to pattern (all bits), 1 - wait until no match (any of bits differ)
input wait_seq;
reg match;
reg [5:0] seq_num;
begin
WAITING_STATUS = 1;
for (match=0; !match; match = invert_match ^ (((registered_rdata ^ {6'h0,pattern}) & {6'h0,mask})==0)) begin
read_status(status_address);
if (wait_seq) begin
seq_num = (registered_rdata[STATUS_SEQ_SHFT+:6] ^ 6'h20)&'h30;
write_contol_register(status_control_address, {24'b0,status_mode,seq_num});
read_status(status_address);
while (((registered_rdata[STATUS_SEQ_SHFT+:6] ^ seq_num) & 6'h30)!=0) begin // match just 2 MSBs
read_status(status_address);
end
end
end
WAITING_STATUS = 0;
end
endtask
`endif
/*
task wait_status_condition_auto; // assumes status is already updating
input [STATUS_DEPTH-1:0] status_address;
input [29:0] status_control_address;
input [1:0] status_mode;
input [25:0] pattern; // bits as in read registers
input [25:0] mask; // which bits to compare
input invert_match; // 0 - wait until match to pattern (all bits), 1 - wait until no match (any of bits differ)
reg match;
begin
WAITING_STATUS = 1;
for (match=0; !match; match = invert_match ^ (((registered_rdata ^ {6'h0,pattern}) & {6'h0,mask})==0)) begin
read_status(status_address);
end
WAITING_STATUS = 0;
end
endtask
*/
task wait_phase_shifter_ready;
begin
WAITING_STATUS = 1;
read_status(MCONTR_PHY_STATUS_REG_ADDR);
while (((registered_rdata & STATUS_PSHIFTER_RDY_MASK) == 0) || (((registered_rdata ^ {24'h0,target_phase}) & 'hff) != 0)) begin
read_status(MCONTR_PHY_STATUS_REG_ADDR); // exits after negedge CLK
end
WAITING_STATUS = 0;
end
endtask
task read_all_status;
begin
$display (" read_all_status @%t",$time);
read_status (MCONTR_PHY_STATUS_REG_ADDR);
read_status (MCONTR_TOP_STATUS_REG_ADDR);
read_status (MCNTRL_PS_STATUS_REG_ADDR);
read_status (MCNTRL_SCANLINE_STATUS_REG_CHN1_ADDR);
read_status (MCNTRL_SCANLINE_STATUS_REG_CHN3_ADDR);
read_status (MCNTRL_TILED_STATUS_REG_CHN2_ADDR);
read_status (MCNTRL_TILED_STATUS_REG_CHN4_ADDR);
// read_status (MCNTRL_TEST01_STATUS_REG_CHN1_ADDR);
read_status (MCNTRL_TEST01_STATUS_REG_CHN2_ADDR);
read_status (MCNTRL_TEST01_STATUS_REG_CHN3_ADDR);
read_status (MCNTRL_TEST01_STATUS_REG_CHN4_ADDR);
read_status (MEMBRIDGE_STATUS_REG);
end
endtask
task read_status;
input [STATUS_DEPTH-1:0] address;
begin
read_and_wait_w(STATUS_ADDR + address ); // Will set: registered_rdata <= rdata;
end
endtask
task program_status_all;
input [1:0] mode;
input [5:0] seq_num;
begin
program_status (MCONTR_PHY_16BIT_ADDR, MCONTR_PHY_STATUS_CNTRL, mode,seq_num); //MCONTR_PHY_STATUS_REG_ADDR= 'h0,
program_status (MCONTR_TOP_16BIT_ADDR, MCONTR_TOP_16BIT_STATUS_CNTRL, mode,seq_num); //MCONTR_TOP_STATUS_REG_ADDR= 'h1,
program_status (MCNTRL_PS_ADDR, MCNTRL_PS_STATUS_CNTRL, mode,seq_num); //MCNTRL_PS_STATUS_REG_ADDR= 'h2,
program_status (MCNTRL_SCANLINE_CHN1_ADDR, MCNTRL_SCANLINE_STATUS_CNTRL, mode,seq_num); //MCNTRL_SCANLINE_STATUS_REG_CHN2_ADDR='h4,
program_status (MCNTRL_SCANLINE_CHN3_ADDR, MCNTRL_SCANLINE_STATUS_CNTRL, mode,seq_num); //MCNTRL_SCANLINE_STATUS_REG_CHN3_ADDR='h5,
program_status (MCNTRL_TILED_CHN2_ADDR, MCNTRL_TILED_STATUS_CNTRL, mode,seq_num); //MCNTRL_TILED_STATUS_REG_CHN4_ADDR= 'h6,
program_status (MCNTRL_TILED_CHN4_ADDR, MCNTRL_TILED_STATUS_CNTRL, mode,seq_num); //MCNTRL_TILED_STATUS_REG_CHN4_ADDR= 'h6,
// program_status (MCNTRL_TEST01_ADDR, MCNTRL_TEST01_CHN1_STATUS_CNTRL,mode,seq_num); //MCNTRL_TEST01_STATUS_REG_CHN2_ADDR= 'h3c,
program_status (MCNTRL_TEST01_ADDR, MCNTRL_TEST01_CHN2_STATUS_CNTRL,mode,seq_num); //MCNTRL_TEST01_STATUS_REG_CHN2_ADDR= 'h3c,
program_status (MCNTRL_TEST01_ADDR, MCNTRL_TEST01_CHN3_STATUS_CNTRL,mode,seq_num); //MCNTRL_TEST01_STATUS_REG_CHN3_ADDR= 'h3d,
program_status (MCNTRL_TEST01_ADDR, MCNTRL_TEST01_CHN4_STATUS_CNTRL,mode,seq_num); //MCNTRL_TEST01_STATUS_REG_CHN4_ADDR= 'h3e,
program_status (MEMBRIDGE_ADDR , MEMBRIDGE_STATUS_CNTRL, mode,seq_num); //MCNTRL_TEST01_STATUS_REG_CHN4_ADDR= 'h3e,
end
endtask
task program_status;
input [29:0] base_addr;
input [7:0] reg_addr;
input [1:0] mode;
// mode bits:
// 0 disable status generation,
// 1 single status request,
// 2 - auto status, keep specified seq number,
// 3 - auto, inc sequence number
input [5:0] seq_number;
begin
// axi_write_single_w(CONTROL_ADDR+base_addr+reg_addr, {24'b0,mode,seq_number});
write_contol_register(base_addr + reg_addr, {24'b0,mode,seq_number});
end
endtask
system_defines.vh 0 → 100644
View file @ e4816b14
// This file may be used to define same pre-processor macros to be included into each parsed file
`ifndef SYSTEM_DEFINES
`define SYSTEM_DEFINES
`define PRELOAD_BRAMS
// Enviroment-dependent options
`ifdef IVERILOG
`define SIMULATION
`define OPEN_SOURCE_ONLY
`else
`ifdef CVC
`define SIMULATION
`define OPEN_SOURCE_ONLY
`endif // CVC
`endif // IVERILOG
// will not use simultaneous reset in shift registers, just and input data with ~rst
`define SHREG_SEQUENTIAL_RESET 1
// synthesis does to recognize global clock as G input of the primitive latch
`undef INFER_LATCHES
// define when using CDC - it does not support them
`undef IGNORE_ATTR
//`define MEMBRIDGE_DEBUG_READ 1
`define use200Mhz 1
`define USE_CMD_ENCOD_TILED_32_RD 1
// It can be used to check different `ifdef branches
//`define XIL_TIMING //Simprim
`define den4096Mb 1
// `define IVERILOG
// defines for memory channels
// chn 0 is read from memory and write to memory
`define def_enable_mem_chn0
`define def_read_mem_chn0
`define def_write_mem_chn0
`undef def_scanline_chn0
`undef def_tiled_chn0
// chn 1 is scanline r+w
`define def_enable_mem_chn1
`define def_read_mem_chn1
`define def_write_mem_chn1
`define def_scanline_chn1
`undef def_tiled_chn1
// chn 2 is tiled r+w
`define def_enable_mem_chn2
`define def_read_mem_chn2
`define def_write_mem_chn2
`undef def_scanline_chn2
`define def_tiled_chn2
// chn 3 is scanline r+w (reuse later)
`define def_enable_mem_chn3
`define def_read_mem_chn3
`define def_write_mem_chn3
`define def_scanline_chn3
`undef def_tiled_chn3
// chn 4 is tiled r+w (reuse later)
`define def_enable_mem_chn4
`define def_read_mem_chn4
`define def_write_mem_chn4
`undef def_scanline_chn4
`define def_tiled_chn4
// chn 5 is disabled
`undef def_enable_mem_chn5
// chn 6 is disabled
`undef def_enable_mem_chn6
// chn 7 is disabled
`undef def_enable_mem_chn7
// chn 8 is scanline w (sensor channel 0)
`define def_enable_mem_chn8
`undef def_read_mem_chn8
`define def_write_mem_chn8
`define def_scanline_chn8
`undef def_tiled_chn8
// chn 9 is scanline w (sensor channel 1)
`define def_enable_mem_chn9
`undef def_read_mem_chn9
`define def_write_mem_chn9
`define def_scanline_chn9
`undef def_tiled_chn9
// chn 10 is scanline w (sensor channel 2)
`define def_enable_mem_chn10
`undef def_read_mem_chn10
`define def_write_mem_chn10
`define def_scanline_chn10
`undef def_tiled_chn10
// chn 11 is scanline w (sensor channel 3)
`define def_enable_mem_chn11
`undef def_read_mem_chn11
`define def_write_mem_chn11
`define def_scanline_chn11
`undef def_tiled_chn11
// chn 12 is tiled read (compressor channel 0)
`define def_enable_mem_chn12
`define def_read_mem_chn12
`undef def_write_mem_chn12
`undef def_scanline_chn12
`define def_tiled_chn12
// chn 12 is tiled read (compressor channel 1)
`define def_enable_mem_chn13
`define def_read_mem_chn13
`undef def_write_mem_chn13
`undef def_scanline_chn13
`define def_tiled_chn13
// chn 12 is tiled read (compressor channel 2)
`define def_enable_mem_chn14
`define def_read_mem_chn14
`undef def_write_mem_chn14
`undef def_scanline_chn14
`define def_tiled_chn14
// chn 12 is tiled read (compressor channel 3)
`define def_enable_mem_chn15
`define def_read_mem_chn15
`undef def_write_mem_chn15
`undef def_scanline_chn15
`define def_tiled_chn15
`endif
\ No newline at end of file
wrapper/GTXE2_GPL.v
View file @ e4816b14
......@@ -88,7 +88,7 @@ module gtxe2_chnl_cpll(
input wire [4:0] PMARSVDIN,
input wire [4:0] PMARSVDIN2,
input wire [19:0] TSTIN,
output wire TSTOUT,
output wire [9:0] TSTOUT,
// internal
input wire ref_clk,
......@@ -287,7 +287,7 @@ module gtxe2_chnl_clocking(
output wire rx_sipo_clk,
// additional ports to cpll
output TSTOUT,
output [9:0] TSTOUT,
input [15:0] GTRSVD,
input [15:0] PCSRSVDIN,
input [4:0] PCSRSVDIN2,
......@@ -2208,7 +2208,7 @@ module gtxe2_chnl(
output wire rx_serial_clk,
// additional ports to pll
output TSTOUT,
output [9:0] TSTOUT,
input [15:0] GTRSVD,
input [15:0] PCSRSVDIN,
input [4:0] PCSRSVDIN2,
......@@ -2428,7 +2428,7 @@ module GTXE2_GPL(
output CPLLFBCLKLOST,
output CPLLLOCK,
output CPLLREFCLKLOST,
output TSTOUT,
output [9:0] TSTOUT,
input [15:0] GTRSVD,
input [15:0] PCSRSVDIN,
input [4:0] PCSRSVDIN2,
......@@ -2445,7 +2445,7 @@ module GTXE2_GPL(
input TXPMARESET,
output TXRESETDONE,
input TXUSERRDY,
output PCSRSVDOUT,
output [15:0] PCSRSVDOUT,
// RX Reset ports, UG476 p.73
input GTRXRESET,
input RXPMARESET,
......@@ -2651,8 +2651,8 @@ module GTXE2_GPL(
input RXDLYOVRDEN,
input RXDDIEN,
output RXPHALIGNDONE,
output RXPHMONITOR,
output RXPHSLIPMONITOR,
output [4:0] RXPHMONITOR,
output [4:0] RXPHSLIPMONITOR,
output RXDLYSRESETDONE,
// RX Buffer Ports, ug476 p.259
output [2:0] RXBUFSTATUS,
......
wrapper/gtxe2_channel_wrapper.v
View file @ e4816b14
......@@ -18,7 +18,6 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
`define OPEN_SOURCE_ONLY
module gtxe2_channel_wrapper(
// clocking ports, UG476 p.37
input [2:0] CPLLREFCLKSEL,
......@@ -40,7 +39,7 @@ module gtxe2_channel_wrapper(
output CPLLFBCLKLOST,
output CPLLLOCK,
output CPLLREFCLKLOST,
output TSTOUT,
output [9:0] TSTOUT,
input [15:0] GTRSVD,
input [15:0] PCSRSVDIN,
input [4:0] PCSRSVDIN2,
......@@ -57,7 +56,7 @@ module gtxe2_channel_wrapper(
input TXPMARESET,
output TXRESETDONE,
input TXUSERRDY,
output PCSRSVDOUT,
output [15:0] PCSRSVDOUT,
// RX Reset ports, UG476 p.73
input GTRXRESET,
input RXPMARESET,
......@@ -263,8 +262,8 @@ module gtxe2_channel_wrapper(
input RXDLYOVRDEN,
input RXDDIEN,
output RXPHALIGNDONE,
output RXPHMONITOR,
output RXPHSLIPMONITOR,
output [4:0] RXPHMONITOR,
output [4:0] RXPHSLIPMONITOR,
output RXDLYSRESETDONE,
// RX Buffer Ports, ug476 p.259
output [2:0] RXBUFSTATUS,
......@@ -358,10 +357,10 @@ parameter TXPHDLY_CFG = 24'h0;
parameter TXDLY_CFG = 16'h0;
parameter TXDLY_LCFG = 9'h0;
parameter TXDLY_TAP_CFG = 16'h0;
parameter TXSYNC_MULTILANE = 1'b0;
parameter TXSYNC_SKIP_DA = 1'b0;
parameter TXSYNC_OVRD = 1'b1;
parameter LOOPBACK_CFG = 1'b0;
//parameter TXSYNC_MULTILANE = 1'b0;
//parameter TXSYNC_SKIP_DA = 1'b0;
//parameter TXSYNC_OVRD = 1'b1;
//parameter LOOPBACK_CFG = 1'b0;
// TX Pattern Generator, ug476 p.147
parameter RXPRBS_ERR_LOOPBACK = 1'b0;
// TX Fabric Clock Output Control Attributes, ug476 p. 153
......@@ -459,7 +458,7 @@ parameter RX_DATA_WIDTH = 20;
parameter RX_INT_DATAWIDTH = 0;
parameter ES_PMA_CFG = 10'h0;
// Pattern Checker Attributes, ug476 p.226
parameter RX_PRBS_ERR_CNT = 16'h15c;
//parameter RX_PRBS_ERR_CNT = 16'h15c;
// RX Byte and Word Alignment Attributes, ug476 p.235
parameter ALIGN_COMMA_WORD = 1;
parameter ALIGN_COMMA_ENABLE = 10'b1111111111;
......@@ -472,7 +471,7 @@ parameter SHOW_REALIGN_COMMA = "TRUE";
parameter RXSLIDE_MODE = "OFF";
parameter RXSLIDE_AUTO_WAIT = 7;
parameter RX_SIG_VALID_DLY = 10;
parameter COMMA_ALIGN_LATENCY = 9'h14e;
//parameter COMMA_ALIGN_LATENCY = 9'h14e;
// RX 8B/10B Decoder Attributes, ug476 p.242
parameter RX_DISPERR_SEQ_MATCH = "TRUE";
parameter DEC_MCOMMA_DETECT = "TRUE";
......@@ -608,10 +607,10 @@ GTXE2_CHANNEL #(
.TXDLY_CFG (TXDLY_CFG),
.TXDLY_LCFG (TXDLY_LCFG),
.TXDLY_TAP_CFG (TXDLY_TAP_CFG),
.TXSYNC_MULTILANE (TXSYNC_MULTILANE),
/* .TXSYNC_MULTILANE (TXSYNC_MULTILANE),
.TXSYNC_SKIP_DA (TXSYNC_SKIP_DA),
.TXSYNC_OVRD (TXSYNC_OVRD),
.LOOPBACK_CFG (LOOPBACK_CFG),
.LOOPBACK_CFG (LOOPBACK_CFG),*/
// TX Pattern Generator, ug476 p.147
.RXPRBS_ERR_LOOPBACK (RXPRBS_ERR_LOOPBACK),
// TX Fabric Clock Output Control Attributes, ug476 p. 153
......@@ -714,7 +713,7 @@ GTXE2_CHANNEL #(
.RX_INT_DATAWIDTH (RX_INT_DATAWIDTH),
.ES_PMA_CFG (ES_PMA_CFG),
// Pattern Checker Attributes, ug476 p.226
.RX_PRBS_ERR_CNT (RX_PRBS_ERR_CNT),
//.RX_PRBS_ERR_CNT (RX_PRBS_ERR_CNT),
// RX Byte and Word Alignment Attributes, ug476 p.235
.ALIGN_COMMA_WORD (ALIGN_COMMA_WORD),
.ALIGN_COMMA_ENABLE (ALIGN_COMMA_ENABLE),
......@@ -727,7 +726,7 @@ GTXE2_CHANNEL #(
.RXSLIDE_MODE (RXSLIDE_MODE),
.RXSLIDE_AUTO_WAIT (RXSLIDE_AUTO_WAIT),
.RX_SIG_VALID_DLY (RX_SIG_VALID_DLY),
.COMMA_ALIGN_LATENCY (COMMA_ALIGN_LATENCY),
//.COMMA_ALIGN_LATENCY (COMMA_ALIGN_LATENCY),
// RX 8B/10B Decoder Attributes, ug476 p.242
.RX_DISPERR_SEQ_MATCH (RX_DISPERR_SEQ_MATCH),
.DEC_MCOMMA_DETECT (DEC_MCOMMA_DETECT),
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment