Commit 78da3183 authored by Andrey Filippov's avatar Andrey Filippov

modifying RX input settings

parent 0e68732d
...@@ -52,87 +52,87 @@ ...@@ -52,87 +52,87 @@
<link> <link>
<name>vivado_logs/VivadoBitstream.log</name> <name>vivado_logs/VivadoBitstream.log</name>
<type>1</type> <type>1</type>
<location>/home/andrey/git/x393_sata/vivado_logs/VivadoBitstream-20160211193930680.log</location> <location>/home/andrey/git/x393_sata/vivado_logs/VivadoBitstream-20160213012011614.log</location>
</link> </link>
<link> <link>
<name>vivado_logs/VivadoOpt.log</name> <name>vivado_logs/VivadoOpt.log</name>
<type>1</type> <type>1</type>
<location>/home/andrey/git/x393_sata/vivado_logs/VivadoOpt-20160211193930680.log</location> <location>/home/andrey/git/x393_sata/vivado_logs/VivadoOpt-20160213012011614.log</location>
</link> </link>
<link> <link>
<name>vivado_logs/VivadoOptPhys.log</name> <name>vivado_logs/VivadoOptPhys.log</name>
<type>1</type> <type>1</type>
<location>/home/andrey/git/x393_sata/vivado_logs/VivadoOptPhys-20160211193930680.log</location> <location>/home/andrey/git/x393_sata/vivado_logs/VivadoOptPhys-20160213012011614.log</location>
</link> </link>
<link> <link>
<name>vivado_logs/VivadoOptPower.log</name> <name>vivado_logs/VivadoOptPower.log</name>
<type>1</type> <type>1</type>
<location>/home/andrey/git/x393_sata/vivado_logs/VivadoOptPower-20160211193930680.log</location> <location>/home/andrey/git/x393_sata/vivado_logs/VivadoOptPower-20160213012011614.log</location>
</link> </link>
<link> <link>
<name>vivado_logs/VivadoPlace.log</name> <name>vivado_logs/VivadoPlace.log</name>
<type>1</type> <type>1</type>
<location>/home/andrey/git/x393_sata/vivado_logs/VivadoPlace-20160211193930680.log</location> <location>/home/andrey/git/x393_sata/vivado_logs/VivadoPlace-20160213012011614.log</location>
</link> </link>
<link> <link>
<name>vivado_logs/VivadoRoute.log</name> <name>vivado_logs/VivadoRoute.log</name>
<type>1</type> <type>1</type>
<location>/home/andrey/git/x393_sata/vivado_logs/VivadoRoute-20160211193930680.log</location> <location>/home/andrey/git/x393_sata/vivado_logs/VivadoRoute-20160213012011614.log</location>
</link> </link>
<link> <link>
<name>vivado_logs/VivadoSynthesis.log</name> <name>vivado_logs/VivadoSynthesis.log</name>
<type>1</type> <type>1</type>
<location>/home/andrey/git/x393_sata/vivado_logs/VivadoSynthesis-20160211193930680.log</location> <location>/home/andrey/git/x393_sata/vivado_logs/VivadoSynthesis-20160213012011614.log</location>
</link> </link>
<link> <link>
<name>vivado_logs/VivadoTimimgSummaryReportImplemented.log</name> <name>vivado_logs/VivadoTimimgSummaryReportImplemented.log</name>
<type>1</type> <type>1</type>
<location>/home/andrey/git/x393_sata/vivado_logs/VivadoTimimgSummaryReportImplemented-20160211193930680.log</location> <location>/home/andrey/git/x393_sata/vivado_logs/VivadoTimimgSummaryReportImplemented-20160213012011614.log</location>
</link> </link>
<link> <link>
<name>vivado_logs/VivadoTimimgSummaryReportSynthesis.log</name> <name>vivado_logs/VivadoTimimgSummaryReportSynthesis.log</name>
<type>1</type> <type>1</type>
<location>/home/andrey/git/x393_sata/vivado_logs/VivadoTimimgSummaryReportSynthesis-20160211193930680.log</location> <location>/home/andrey/git/x393_sata/vivado_logs/VivadoTimimgSummaryReportSynthesis-20160213012011614.log</location>
</link> </link>
<link> <link>
<name>vivado_logs/VivadoTimingReportImplemented.log</name> <name>vivado_logs/VivadoTimingReportImplemented.log</name>
<type>1</type> <type>1</type>
<location>/home/andrey/git/x393_sata/vivado_logs/VivadoTimingReportImplemented-20160211193930680.log</location> <location>/home/andrey/git/x393_sata/vivado_logs/VivadoTimingReportImplemented-20160213012011614.log</location>
</link> </link>
<link> <link>
<name>vivado_logs/VivadoTimingReportSynthesis.log</name> <name>vivado_logs/VivadoTimingReportSynthesis.log</name>
<type>1</type> <type>1</type>
<location>/home/andrey/git/x393_sata/vivado_logs/VivadoTimingReportSynthesis-20160211193930680.log</location> <location>/home/andrey/git/x393_sata/vivado_logs/VivadoTimingReportSynthesis-20160213012011614.log</location>
</link> </link>
<link> <link>
<name>vivado_state/x393_sata-opt-phys.dcp</name> <name>vivado_state/x393_sata-opt-phys.dcp</name>
<type>1</type> <type>1</type>
<location>/home/andrey/git/x393_sata/vivado_state/x393_sata-opt-phys-20160211193930680.dcp</location> <location>/home/andrey/git/x393_sata/vivado_state/x393_sata-opt-phys-20160213012011614.dcp</location>
</link> </link>
<link> <link>
<name>vivado_state/x393_sata-opt-power.dcp</name> <name>vivado_state/x393_sata-opt-power.dcp</name>
<type>1</type> <type>1</type>
<location>/home/andrey/git/x393_sata/vivado_state/x393_sata-opt-power-20160211193930680.dcp</location> <location>/home/andrey/git/x393_sata/vivado_state/x393_sata-opt-power-20160213012011614.dcp</location>
</link> </link>
<link> <link>
<name>vivado_state/x393_sata-opt.dcp</name> <name>vivado_state/x393_sata-opt.dcp</name>
<type>1</type> <type>1</type>
<location>/home/andrey/git/x393_sata/vivado_state/x393_sata-opt-20160211193930680.dcp</location> <location>/home/andrey/git/x393_sata/vivado_state/x393_sata-opt-20160213012011614.dcp</location>
</link> </link>
<link> <link>
<name>vivado_state/x393_sata-place.dcp</name> <name>vivado_state/x393_sata-place.dcp</name>
<type>1</type> <type>1</type>
<location>/home/andrey/git/x393_sata/vivado_state/x393_sata-place-20160211193930680.dcp</location> <location>/home/andrey/git/x393_sata/vivado_state/x393_sata-place-20160213012011614.dcp</location>
</link> </link>
<link> <link>
<name>vivado_state/x393_sata-route.dcp</name> <name>vivado_state/x393_sata-route.dcp</name>
<type>1</type> <type>1</type>
<location>/home/andrey/git/x393_sata/vivado_state/x393_sata-route-20160211193930680.dcp</location> <location>/home/andrey/git/x393_sata/vivado_state/x393_sata-route-20160213012011614.dcp</location>
</link> </link>
<link> <link>
<name>vivado_state/x393_sata-synth.dcp</name> <name>vivado_state/x393_sata-synth.dcp</name>
<type>1</type> <type>1</type>
<location>/home/andrey/git/x393_sata/vivado_state/x393_sata-synth-20160211193930680.dcp</location> <location>/home/andrey/git/x393_sata/vivado_state/x393_sata-synth-20160213012011614.dcp</location>
</link> </link>
</linkedResources> </linkedResources>
</projectDescription> </projectDescription>
...@@ -21,6 +21,11 @@ ...@@ -21,6 +21,11 @@
`timescale 1ns/1ps `timescale 1ns/1ps
module ahci_sata_layers #( module ahci_sata_layers #(
`ifdef USE_DATASCOPE
parameter ADDRESS_BITS = 10, //for datascope
parameter DATASCOPE_START_BIT = 14, // bit of DRP "other_control" to start recording after 0->1 (needs DRP)
parameter DATASCOPE_POST_MEAS = 16, // number of measurements to perform after event
`endif
parameter BITS_TO_START_XMIT = 6, // wait H2D FIFO to have 1 << BITS_TO_START_XMIT to start FIS transmission (or all FIS fits) parameter BITS_TO_START_XMIT = 6, // wait H2D FIFO to have 1 << BITS_TO_START_XMIT to start FIS transmission (or all FIS fits)
parameter DATA_BYTE_WIDTH = 4 parameter DATA_BYTE_WIDTH = 4
)( )(
...@@ -91,6 +96,14 @@ module ahci_sata_layers #( ...@@ -91,6 +96,14 @@ module ahci_sata_layers #(
output wire txn_out, output wire txn_out,
input wire rxp_in, input wire rxp_in,
input wire rxn_in, input wire rxn_in,
`ifdef USE_DATASCOPE
// Datascope interface (write to memory that can be software-read)
output datascope_clk,
output [ADDRESS_BITS-1:0] datascope_waddr,
output datascope_we,
output [31:0] datascope_di,
`endif
`ifdef USE_DRP `ifdef USE_DRP
input drp_rst, input drp_rst,
input drp_clk, input drp_clk,
...@@ -320,6 +333,11 @@ module ahci_sata_layers #( ...@@ -320,6 +333,11 @@ module ahci_sata_layers #(
sata_phy #( sata_phy #(
`ifdef USE_DATASCOPE
.ADDRESS_BITS (ADDRESS_BITS), // for datascope
.DATASCOPE_START_BIT (DATASCOPE_START_BIT),
.DATASCOPE_POST_MEAS (DATASCOPE_POST_MEAS),
`endif
.DATA_BYTE_WIDTH(4) .DATA_BYTE_WIDTH(4)
) phy ( ) phy (
.extrst (exrst), // input wire .extrst (exrst), // input wire
...@@ -351,6 +369,13 @@ module ahci_sata_layers #( ...@@ -351,6 +369,13 @@ module ahci_sata_layers #(
.usrpll_locked_debug(), .usrpll_locked_debug(),
.re_aligned (serr_DS), // output reg .re_aligned (serr_DS), // output reg
`ifdef USE_DATASCOPE
.datascope_clk (datascope_clk), // output
.datascope_waddr (datascope_waddr), // output[9:0]
.datascope_we (datascope_we), // output
.datascope_di (datascope_di), // output[31:0]
.datascope_trig (ll_frame_ackn), // input datascope external trigger
`endif
`ifdef USE_DRP `ifdef USE_DRP
.drp_rst (drp_rst), // input .drp_rst (drp_rst), // input
......
...@@ -182,6 +182,16 @@ module ahci_top#( ...@@ -182,6 +182,16 @@ module ahci_top#(
output irq, // CPU interrupt request output irq, // CPU interrupt request
`ifdef USE_DATASCOPE
// Datascope interface (write to memory that can be software-read)
input datascope1_clk,
input [ADDRESS_BITS-1:0] datascope1_waddr,
input datascope1_we,
input [31:0] datascope1_di,
`endif
`ifdef USE_DRP `ifdef USE_DRP
output drp_en, // @aclk strobes drp_ad output drp_en, // @aclk strobes drp_ad
output drp_we, output drp_we,
...@@ -715,7 +725,9 @@ module ahci_top#( ...@@ -715,7 +725,9 @@ module ahci_top#(
.debug_in0 (debug_dma), // input[31:0] .debug_in0 (debug_dma), // input[31:0]
.debug_in1 (debug_dma1), // debug_in_link), // input[31:0] .debug_in1 (debug_dma1), // debug_in_link), // input[31:0]
.debug_in2 (debug_in_phy), // input[31:0] // debug from phy/link .debug_in2 (debug_in_phy), // input[31:0] // debug from phy/link
.debug_in3 ({22'b0, last_jump_addr[9:0]}) // input[31:0]// Last jump address in the AHDCI sequencer // .debug_in3 ({22'b0, last_jump_addr[9:0]}) // input[31:0]// Last jump address in the AHDCI sequencer
.debug_in3 ({3'b0, debug_in_link[4:0], 14'b0,last_jump_addr[9:0]}) // input[31:0]// Last jump address in the AHDCI sequencer
`ifdef USE_DRP `ifdef USE_DRP
,.drp_en (drp_en), // output reg ,.drp_en (drp_en), // output reg
.drp_we (drp_we), // output reg .drp_we (drp_we), // output reg
...@@ -730,7 +742,12 @@ module ahci_top#( ...@@ -730,7 +742,12 @@ module ahci_top#(
,.datascope_clk (datascope_clk), // input ,.datascope_clk (datascope_clk), // input
.datascope_waddr (datascope_waddr), // input[9:0] .datascope_waddr (datascope_waddr), // input[9:0]
.datascope_we (datascope_we), // input .datascope_we (datascope_we), // input
.datascope_di (datascope_di) // input[31:0] .datascope_di (datascope_di), // input[31:0]
.datascope1_clk (datascope1_clk), // input
.datascope1_waddr (datascope1_waddr),// input[9:0]
.datascope1_we (datascope1_we), // input
.datascope1_di (datascope1_di) // input[31:0]
`endif `endif
/// .debug_in (debug_in[31:0]) /// .debug_in (debug_in[31:0])
); );
......
...@@ -132,7 +132,12 @@ module axi_ahci_regs#( ...@@ -132,7 +132,12 @@ module axi_ahci_regs#(
,input datascope_clk, ,input datascope_clk,
input [ADDRESS_BITS-1:0] datascope_waddr, input [ADDRESS_BITS-1:0] datascope_waddr,
input datascope_we, input datascope_we,
input [31:0] datascope_di input [31:0] datascope_di,
input datascope1_clk,
input [ADDRESS_BITS-1:0] datascope1_waddr,
input datascope1_we,
input [31:0] datascope1_di
`endif `endif
); );
`ifdef USE_DRP `ifdef USE_DRP
...@@ -142,11 +147,15 @@ module axi_ahci_regs#( ...@@ -142,11 +147,15 @@ module axi_ahci_regs#(
reg drp_ready_r; reg drp_ready_r;
`endif `endif
`ifdef USE_DATASCOPE `ifdef USE_DATASCOPE
localparam AXIBRAM_BITS = ADDRESS_BITS + 1; // number of axi address outputs (one more than ADDRESS_BITS when using datascope) // localparam AXIBRAM_BITS = ADDRESS_BITS + 1; // number of axi address outputs (one more than ADDRESS_BITS when using datascope)
localparam AXIBRAM_BITS = ADDRESS_BITS + 2; // number of axi address outputs (one more than ADDRESS_BITS when using datascope)
wire [31:0] datascope_rdata; wire [31:0] datascope_rdata;
reg [1:0] datascope_sel; // read datascope memory instead of the registers reg [1:0] datascope_sel; // read datascope memory instead of the registers
wire [31:0] datascope1_rdata;
reg [1:0] datascope1_sel; // read datascope memory instead of the registers
always @ (posedge aclk) begin always @ (posedge aclk) begin
datascope_sel <= {datascope_sel[0], bram_raddr[ADDRESS_BITS]}; datascope_sel <= {datascope_sel[0], ~bram_raddr[ADDRESS_BITS+1] & bram_raddr[ADDRESS_BITS]};
datascope1_sel <= {datascope1_sel[0], bram_raddr[ADDRESS_BITS+1] & ~bram_raddr[ADDRESS_BITS]};
end end
`else `else
localparam AXIBRAM_BITS = ADDRESS_BITS; // number of axi address outputs (one more than ADDRESS_BITS when using datascope) localparam AXIBRAM_BITS = ADDRESS_BITS; // number of axi address outputs (one more than ADDRESS_BITS when using datascope)
...@@ -433,7 +442,9 @@ sata_phy_rst_out will be released after the sata clock is stable ...@@ -433,7 +442,9 @@ sata_phy_rst_out will be released after the sata clock is stable
.bram_ren (bram_ren[0]), // output .bram_ren (bram_ren[0]), // output
.bram_regen (bram_ren[1]), // output .bram_regen (bram_ren[1]), // output
`ifdef USE_DATASCOPE `ifdef USE_DATASCOPE
.bram_rdata (datascope_sel[1] ? datascope_rdata : bram_rdata_r) // input[31:0] .bram_rdata ((datascope_sel[1] | datascope1_sel[1]) ?
(datascope1_sel[1]? datascope1_rdata : datascope_rdata) :
bram_rdata_r) // input[31:0]
`else `else
.bram_rdata (bram_rdata_r) // input[31:0] .bram_rdata (bram_rdata_r) // input[31:0]
`endif `endif
...@@ -510,6 +521,24 @@ sata_phy_rst_out will be released after the sata clock is stable ...@@ -510,6 +521,24 @@ sata_phy_rst_out will be released after the sata clock is stable
.web (8'hff), // input[7:0] .web (8'hff), // input[7:0]
.data_in (datascope_di) // input[31:0] .data_in (datascope_di) // input[31:0]
); );
ram_var_w_var_r #(
.REGISTERS (0),
.LOG2WIDTH_WR (5),
.LOG2WIDTH_RD (5),
.DUMMY(0)
) datascope1_mem_i (
.rclk (aclk), // input
.raddr (bram_raddr[9:0]), // input[9:0]
.ren (bram_ren[0]), // input
.regen (bram_ren[1]), // input
.data_out (datascope1_rdata), // output[31:0]
.wclk (datascope1_clk), // input
.waddr (datascope1_waddr), // input[9:0]
.we (datascope1_we), // input
.web (8'hff), // input[7:0]
.data_in (datascope1_di) // input[31:0]
);
`endif `endif
fifo_cross_clocks #( fifo_cross_clocks #(
......
...@@ -40,6 +40,11 @@ ...@@ -40,6 +40,11 @@
// parameter READ_REG_LATENCY = 2, // 0 if reg_rdata is available with reg_re/reg_addr, 2 with re/regen // parameter READ_REG_LATENCY = 2, // 0 if reg_rdata is available with reg_re/reg_addr, 2 with re/regen
// parameter READ_CT_LATENCY = 1, // 0 if ct_rdata is available with reg_re/reg_addr, 2 with re/regen // parameter READ_CT_LATENCY = 1, // 0 if ct_rdata is available with reg_re/reg_addr, 2 with re/regen
parameter ADDRESS_BITS = 10, // number of memory address bits - now fixed. Low half - RO/RW/RWC,RW1 (2-cycle write), 2-nd just RW (single-cycle) parameter ADDRESS_BITS = 10, // number of memory address bits - now fixed. Low half - RO/RW/RWC,RW1 (2-cycle write), 2-nd just RW (single-cycle)
`ifdef USE_DATASCOPE
parameter DATASCOPE_START_BIT = 14, // bit of DRP "other_control" to start recording after 0->1 (needs DRP)
parameter DATASCOPE_POST_MEAS = 256, // 16, // number of measurements to perform after event
`endif
parameter HBA_RESET_BITS = 9, // duration of HBA reset in aclk periods (9: ~10usec) parameter HBA_RESET_BITS = 9, // duration of HBA reset in aclk periods (9: ~10usec)
parameter RESET_TO_FIRST_ACCESS = 1 // keep port reset until first R/W any register by software parameter RESET_TO_FIRST_ACCESS = 1 // keep port reset until first R/W any register by software
)( )(
...@@ -223,6 +228,13 @@ ...@@ -223,6 +228,13 @@
reg [2:0] nhrst_r; reg [2:0] nhrst_r;
wire hrst = !nhrst_r[2]; wire hrst = !nhrst_r[2];
`ifdef USE_DATASCOPE
// Datascope interface (write to memory that can be software-read)
wire datascope_clk;
wire [ADDRESS_BITS-1:0] datascope_waddr;
wire datascope_we;
wire [31:0] datascope_di;
`endif
`ifdef USE_DRP `ifdef USE_DRP
wire drp_en; wire drp_en;
...@@ -376,6 +388,14 @@ ...@@ -376,6 +388,14 @@
.sctl_ipm (sctl_ipm), // output[3:0] .sctl_ipm (sctl_ipm), // output[3:0]
.sctl_spd (sctl_spd), // output[3:0] .sctl_spd (sctl_spd), // output[3:0]
.irq (irq), // output .irq (irq), // output
`ifdef USE_DATASCOPE
.datascope1_clk (datascope_clk), // input
.datascope1_waddr (datascope_waddr), // input[9:0]
.datascope1_we (datascope_we), // input
.datascope1_di (datascope_di), // input[31:0]
`endif
`ifdef USE_DRP `ifdef USE_DRP
.drp_en (drp_en), // output reg .drp_en (drp_en), // output reg
.drp_we (drp_we), // output reg .drp_we (drp_we), // output reg
...@@ -389,7 +409,12 @@ ...@@ -389,7 +409,12 @@
); );
ahci_sata_layers #( ahci_sata_layers #(
.BITS_TO_START_XMIT(6), `ifdef USE_DATASCOPE
.ADDRESS_BITS (ADDRESS_BITS), // for datascope
.DATASCOPE_START_BIT (DATASCOPE_START_BIT), // bit of DRP "other_control" to start recording after 0->1 (needs DRP)
.DATASCOPE_POST_MEAS (DATASCOPE_POST_MEAS), // number of measurements to perform after event
`endif
.BITS_TO_START_XMIT (6),
.DATA_BYTE_WIDTH(4) .DATA_BYTE_WIDTH(4)
) ahci_sata_layers_i ( ) ahci_sata_layers_i (
.exrst (exrst), // input .exrst (exrst), // input
...@@ -444,6 +469,12 @@ ...@@ -444,6 +469,12 @@
.txn_out (TXN), // output wire .txn_out (TXN), // output wire
.rxp_in (RXP), // input wire .rxp_in (RXP), // input wire
.rxn_in (RXN), // input wire .rxn_in (RXN), // input wire
`ifdef USE_DATASCOPE
.datascope_clk (datascope_clk), // output
.datascope_waddr (datascope_waddr), // output[9:0]
.datascope_we (datascope_we), // output
.datascope_di (datascope_di), // output[31:0]
`endif
`ifdef USE_DRP `ifdef USE_DRP
.drp_rst (arst), // input .drp_rst (arst), // input
.drp_clk (ACLK), // input .drp_clk (ACLK), // input
......
...@@ -9,7 +9,9 @@ create_clock -name gtrefclk -period 6.666 -waveform {0.000 3.333} [get_nets sata ...@@ -9,7 +9,9 @@ create_clock -name gtrefclk -period 6.666 -waveform {0.000 3.333} [get_nets sata
create_clock -name txoutclk -period 6.666 -waveform {0.000 3.333} [get_nets sata_top/ahci_sata_layers_i/phy/txoutclk] create_clock -name txoutclk -period 6.666 -waveform {0.000 3.333} [get_nets sata_top/ahci_sata_layers_i/phy/txoutclk]
# recovered sata parallel clock # recovered sata parallel clock
create_clock -name xclk -period 6.666 -waveform {0.000 3.333} [get_nets sata_top/ahci_sata_layers_i/phy/gtx_wrap/xclk] ##create_clock -name xclk -period 6.666 -waveform {0.000 3.333} [get_nets sata_top/ahci_sata_layers_i/phy/gtx_wrap/xclk]
create_clock -name xclk -period 6.666 -waveform {0.000 3.333} [get_nets sata_top/ahci_sata_layers_i/phy/gtx_wrap/xclk_gtx]
###sata_top/ahci_sata_layers_i/phy/gtx_wrap/xclk_gtx sata_top/ahci_sata_layers_i/phy/gtx_wrap/gtxe2_channel_wrapper/xclk_gtx
# txoutclk -> userpll, which gives us 2 clocks: userclk (150MHz) and userclk2 (75MHz) . The second one is sata host clk # txoutclk -> userpll, which gives us 2 clocks: userclk (150MHz) and userclk2 (75MHz) . The second one is sata host clk
###create_generated_clock -name usrclk [get_nets sata_top/ahci_sata_layers_i/phy/CLK] ###create_generated_clock -name usrclk [get_nets sata_top/ahci_sata_layers_i/phy/CLK]
......
...@@ -38,6 +38,11 @@ ...@@ -38,6 +38,11 @@
// All computations have been done in assumption of GTX interface being 20 bits wide! // All computations have been done in assumption of GTX interface being 20 bits wide!
//`include "system_defines.v" //`include "system_defines.v"
module gtx_wrap #( module gtx_wrap #(
`ifdef USE_DATASCOPE
parameter ADDRESS_BITS = 10, // for datascope
parameter DATASCOPE_START_BIT = 14, // bit of DRP "other_control" to start recording after 0->1 (needs DRP)
parameter DATASCOPE_POST_MEAS = 16, // number of measurements to perform after event
`endif
parameter DATA_BYTE_WIDTH = 4, parameter DATA_BYTE_WIDTH = 4,
parameter TXPMARESET_TIME = 5'h1, parameter TXPMARESET_TIME = 5'h1,
parameter RXPMARESET_TIME = 5'h11, parameter RXPMARESET_TIME = 5'h11,
...@@ -100,6 +105,15 @@ module gtx_wrap #( ...@@ -100,6 +105,15 @@ module gtx_wrap #(
output wire dbg_rxdlysresetdone, output wire dbg_rxdlysresetdone,
output wire [1:0] txbufstatus output wire [1:0] txbufstatus
`ifdef USE_DATASCOPE
// Datascope interface (write to memory that can be software-read)
,output datascope_clk,
output [ADDRESS_BITS-1:0] datascope_waddr,
output datascope_we,
output reg [31:0] datascope_di,
input datascope_trig // external trigger event for the datascope
`endif
`ifdef USE_DRP `ifdef USE_DRP
,input drp_rst, ,input drp_rst,
input drp_clk, input drp_clk,
...@@ -111,8 +125,11 @@ module gtx_wrap #( ...@@ -111,8 +125,11 @@ module gtx_wrap #(
output [15:0] drp_do output [15:0] drp_do
`endif `endif
); );
wire rxresetdone_gtx; wire rxresetdone_gtx;
wire txresetdone_gtx; wire txresetdone_gtx;
reg wrap_rxreset_; reg wrap_rxreset_;
...@@ -390,7 +407,7 @@ wire RXDLYBYPASS; // 7 (1'b0), // Andrey: p.243: "0: Uses the RX d ...@@ -390,7 +407,7 @@ wire RXDLYBYPASS; // 7 (1'b0), // Andrey: p.243: "0: Uses the RX d
wire RXDLYEN; // 8 (1'b0), wire RXDLYEN; // 8 (1'b0),
wire RXDLYOVRDEN; // 9 (1'b0), wire RXDLYOVRDEN; // 9 (1'b0),
wire RXDDIEN; // 10 (1'b1), // Andrey: p.243: "Set high in RX buffer bypass mode" wire RXDDIEN; // 10 (1'b1), // Andrey: p.243: "Set high in RX buffer bypass mode"
wire RXLPMEN; // 11 (1'b0) 1 - enable LP, 0 - DXE
`ifdef USE_DRP `ifdef USE_DRP
sipo_to_xclk_measure #( sipo_to_xclk_measure #(
...@@ -427,7 +444,7 @@ wire RXDDIEN; // 10 (1'b1), // Andrey: p.243: "Set high in RX ...@@ -427,7 +444,7 @@ wire RXDDIEN; // 10 (1'b1), // Andrey: p.243: "Set high in RX
assign RXDLYEN = other_control[ 8]; // 8 (1'b0), assign RXDLYEN = other_control[ 8]; // 8 (1'b0),
assign RXDLYOVRDEN = other_control[ 9]; // 9 (1'b0), assign RXDLYOVRDEN = other_control[ 9]; // 9 (1'b0),
assign RXDDIEN = other_control[10]; // 10 (1'b1), // Andrey: p.243: "Set high in RX buffer bypass mode" assign RXDDIEN = other_control[10]; // 10 (1'b1), // Andrey: p.243: "Set high in RX buffer bypass mode"
assign RXLPMEN = other_control[11]; // 11 (1'b0) 1 - enable LP, 0 - DXE
`else `else
reg [19:0] rxdata_comma_in_r; reg [19:0] rxdata_comma_in_r;
assign rxdata_comma_in = rxdata_comma_in_r; assign rxdata_comma_in = rxdata_comma_in_r;
...@@ -474,6 +491,7 @@ wire RXDDIEN; // 10 (1'b1), // Andrey: p.243: "Set high in RX ...@@ -474,6 +491,7 @@ wire RXDDIEN; // 10 (1'b1), // Andrey: p.243: "Set high in RX
`else `else
assign RXDDIEN = 1'b0; // 10 (1'b1), // Andrey: p.243: "Set high in RX buffer bypass mode" assign RXDDIEN = 1'b0; // 10 (1'b1), // Andrey: p.243: "Set high in RX buffer bypass mode"
`endif `endif
assign RXLPMEN = 1'b0; // 11 (1'b0) 1 - enable LP, 0 - DXE
`endif `endif
// aligner status generation // aligner status generation
// if we detected comma & there was 1st realign after non-aligned state -> triggered, we wait until the next comma // if we detected comma & there was 1st realign after non-aligned state -> triggered, we wait until the next comma
...@@ -866,7 +884,8 @@ gtxe2_channel_wrapper #( ...@@ -866,7 +884,8 @@ gtxe2_channel_wrapper #(
.PMA_RSV4 (32'h00000000), .PMA_RSV4 (32'h00000000),
.RX_BIAS_CFG (12'b000000000100), .RX_BIAS_CFG (12'b000000000100),
.DMONITOR_CFG (24'h000A00), .DMONITOR_CFG (24'h000A00),
.RX_CM_SEL (2'b11), // .RX_CM_SEL (2'b11),
.RX_CM_SEL (2'b00), // Andrey
.RX_CM_TRIM (3'b010), .RX_CM_TRIM (3'b010),
.RX_DEBUG_CFG (12'b000000000000), .RX_DEBUG_CFG (12'b000000000000),
.RX_OS_CFG (13'b0000010000000), .RX_OS_CFG (13'b0000010000000),
...@@ -1162,7 +1181,7 @@ gtxe2_channel_wrapper( ...@@ -1162,7 +1181,7 @@ gtxe2_channel_wrapper(
.RXOOBRESET (1'b0), .RXOOBRESET (1'b0),
.RXPCSRESET (1'b0), .RXPCSRESET (1'b0),
.RXPMARESET (1'b0),//rxreset), // p78 .RXPMARESET (1'b0),//rxreset), // p78
.RXLPMEN (1'b0), .RXLPMEN (RXLPMEN), // 1'b0),
.RXCOMSASDET (), .RXCOMSASDET (),
.RXCOMWAKEDET (rxcomwakedet_gtx), .RXCOMWAKEDET (rxcomwakedet_gtx),
.RXCOMINITDET (rxcominitdet_gtx), .RXCOMINITDET (rxcominitdet_gtx),
...@@ -1252,6 +1271,57 @@ gtxe2_channel_wrapper( ...@@ -1252,6 +1271,57 @@ gtxe2_channel_wrapper(
.TXQPISENP () .TXQPISENP ()
); );
`ifdef USE_DATASCOPE
reg [ADDRESS_BITS - 1:0 ] datascope_post_cntr;
reg [ADDRESS_BITS - 1:0 ] datascope_waddr_r;
reg [2:0] datascope_start_r;
wire datascope_event;
reg datascope_event_r;
reg datascope_run;
reg datascope_post_run;
wire datascope_start_w = other_control[DATASCOPE_START_BIT]; // datascope requires USE_DRP to be defined
wire datascope_stop = (DATASCOPE_POST_MEAS == 0) ? datascope_event: (datascope_post_cntr == 0);
reg [2:0] datascope_trig_r;
assign datascope_waddr = datascope_waddr_r;
assign datascope_we = datascope_run;
assign datascope_clk = xclk;
assign datascope_event = (|rxnotintable_dec_out) || (|rxdisperr_dec_out) || realign || (datascope_trig_r[1] && !datascope_trig_r[2]) ;
always @ (posedge xclk) begin
datascope_trig_r <= {datascope_trig_r[1:0], datascope_trig};
datascope_start_r <= {datascope_start_r[1:0],datascope_start_w};
datascope_event_r <=datascope_event;
if (!datascope_start_r[1]) datascope_run <= 0;
else if (!datascope_start_r[2]) datascope_run <= 1;
else if (datascope_stop) datascope_run <= 0;
if (!datascope_run) datascope_post_run <= 0;
else if (datascope_event_r) datascope_post_run <= 1;
if (!datascope_post_run) datascope_post_cntr <= DATASCOPE_POST_MEAS;
else datascope_post_cntr <= datascope_post_cntr - 1;
if (!datascope_start_r[1] && datascope_start_r[0]) datascope_waddr_r <= 0; // for simulator
else if (datascope_run) datascope_waddr_r <= datascope_waddr_r + 1;
if (datascope_start_r[1]) datascope_di <= {
6'b0,
realign, // 25
comma, // 24
1'b0, // 23
state_aligned, // 22
rxnotintable_dec_out[1:0], // 21:20
rxdisperr_dec_out[1:0], // 19:18
rxcharisk_dec_out[1:0], // 17:16
rxdata_dec_out[15:0]}; // 15: 0
end
`endif
always @ (posedge gtrefclk) always @ (posedge gtrefclk)
debug <= ~rxelecidle | debug; debug <= ~rxelecidle | debug;
......
...@@ -728,7 +728,7 @@ assign rcvd_dword0[CODE_OKP] = phy_isk_in_r0[0] && !(|phy_isk_in_r0[DATA_BYT ...@@ -728,7 +728,7 @@ assign rcvd_dword0[CODE_OKP] = phy_isk_in_r0[0] && !(|phy_isk_in_r0[DATA_BYT
assign rcvd_dword0[CODE_ERRP] = phy_isk_in_r0[0] && !(|phy_isk_in_r0[DATA_BYTE_WIDTH-1:1]) && (prim_data[CODE_ERRP ] == phy_data_in_r0); assign rcvd_dword0[CODE_ERRP] = phy_isk_in_r0[0] && !(|phy_isk_in_r0[DATA_BYTE_WIDTH-1:1]) && (prim_data[CODE_ERRP ] == phy_data_in_r0);
assign rcvd_dword0[CODE_CONTP] = phy_isk_in_r0[0] && !(|phy_isk_in_r0[DATA_BYTE_WIDTH-1:1]) && (prim_data[CODE_CONTP ] == phy_data_in_r0); assign rcvd_dword0[CODE_CONTP] = phy_isk_in_r0[0] && !(|phy_isk_in_r0[DATA_BYTE_WIDTH-1:1]) && (prim_data[CODE_CONTP ] == phy_data_in_r0);
reg [PRIM_NUM - 1:0] debug_rcvd_dword; // at least oce received after reset reg [PRIM_NUM - 1:0] debug_rcvd_dword; // at least once received after reset
//reg [7:0] debug_alignp_cntr; //reg [7:0] debug_alignp_cntr;
///reg [7:0] debug_unknown_primitives; ///reg [7:0] debug_unknown_primitives;
///reg [7:0] debug_notaligned_primitives; ///reg [7:0] debug_notaligned_primitives;
...@@ -751,7 +751,6 @@ reg [15:0] debug_num_other; // other primitives - not aligh, sync or cont ...@@ -751,7 +751,6 @@ reg [15:0] debug_num_other; // other primitives - not aligh, sync or cont
reg [31:0] debug_unknown_dword; reg [31:0] debug_unknown_dword;
wire debug_is_sync_p_w = phy_isk_in_r0[0] && !(|phy_isk_in_r[DATA_BYTE_WIDTH-1:1]) && (prim_data[CODE_SYNCP ] == phy_data_in_r0); wire debug_is_sync_p_w = phy_isk_in_r0[0] && !(|phy_isk_in_r[DATA_BYTE_WIDTH-1:1]) && (prim_data[CODE_SYNCP ] == phy_data_in_r0);
wire [STATES_COUNT - 1:0] debug_states_concat = { wire [STATES_COUNT - 1:0] debug_states_concat = {
state_idle state_idle
, state_sync_esc , state_sync_esc
...@@ -777,6 +776,8 @@ wire [STATES_COUNT - 1:0] debug_states_concat = { ...@@ -777,6 +776,8 @@ wire [STATES_COUNT - 1:0] debug_states_concat = {
, state_rcvr_goodend , state_rcvr_goodend
, state_rcvr_badend , state_rcvr_badend
}; };
reg [4:0] debug_states_encoded;
reg [STATES_COUNT - 1:0] debug_states_visited; reg [STATES_COUNT - 1:0] debug_states_visited;
always @ (posedge clk) begin always @ (posedge clk) begin
...@@ -825,6 +826,16 @@ always @ (posedge clk) begin ...@@ -825,6 +826,16 @@ always @ (posedge clk) begin
if (rst) debug_states_visited <= 0; if (rst) debug_states_visited <= 0;
else debug_states_visited <= debug_states_visited | debug_states_concat; else debug_states_visited <= debug_states_visited | debug_states_concat;
debug_states_encoded <= { |debug_states_concat[22:16],
|debug_states_concat[15: 8],
(|debug_states_concat[22:20]) | (|debug_states_concat[15:12]) | (|debug_states_concat[7:4]),
debug_states_concat[22] | (|debug_states_concat[19:18]) | (|debug_states_concat[15:14]) |
(|debug_states_concat[11:10]) | (|debug_states_concat[7:6]) | (|debug_states_concat[3:2]),
debug_states_concat[21] | debug_states_concat[19] | debug_states_concat[17] | debug_states_concat[15] |
debug_states_concat[13] | debug_states_concat[11] | debug_states_concat[ 9] | debug_states_concat[7] |
debug_states_concat[ 5] | debug_states_concat[ 3] | debug_states_concat[ 1]};
/* /*
if (rst) debug_rcvd_dword <= 0; if (rst) debug_rcvd_dword <= 0;
debug_alignp_r <= rcvd_dword[CODE_ALIGNP]; debug_alignp_r <= rcvd_dword[CODE_ALIGNP];
...@@ -851,6 +862,35 @@ always @ (posedge clk) begin ...@@ -851,6 +862,35 @@ always @ (posedge clk) begin
else if (debug_state_reset_r == 1) debug_notaligned_primitives <= debug_notaligned_primitives + 1; else if (debug_state_reset_r == 1) debug_notaligned_primitives <= debug_notaligned_primitives + 1;
*/ */
end end
/*wire state_idle;
reg state_sync_esc; // SyncEscape
reg state_nocommerr; // NoComErr
reg state_nocomm; // NoComm
reg state_align; // SendAlign - not used, handled by OOB
reg state_reset; // RESET
// tranmitter branch
reg state_send_rdy; // SendChkRdy
reg state_send_sof; // SendSOF
reg state_send_data; // SendData
reg state_send_rhold; // RcvrHold - hold initiated by current data reciever
reg state_send_shold; // SendHold - hold initiated by current data sender
reg state_send_crc; // SendCVC
reg state_send_eof; // SendEOF
reg state_wait; // Wait
// receiver branch
reg state_rcvr_wait; // RcvWaitFifo
reg state_rcvr_rdy; // RcvChkRdy
reg state_rcvr_data; // RcvData
reg state_rcvr_rhold; // Hold - hold initiated by current data reciever
reg state_rcvr_shold; // RcvHold - hold initiated by current data sender
reg state_rcvr_eof; // RcvEOF
reg state_rcvr_goodcrc; // GoodCRC
reg state_rcvr_goodend; // GoodEnd
reg state_rcvr_badend; // BadEnd
*/
///assign debug_out[19: 0] = debug_to_first_err; ///assign debug_out[19: 0] = debug_to_first_err;
//assign debug_out[23:16] = debug_num_aligns; //assign debug_out[23:16] = debug_num_aligns;
//assign debug_out[31:20] = debug_num_syncs[11:0]; //assign debug_out[31:20] = debug_num_syncs[11:0];
...@@ -858,7 +898,8 @@ end ...@@ -858,7 +898,8 @@ end
///assign debug_out[31:20] = debug_num_other[11:0]; ///assign debug_out[31:20] = debug_num_other[11:0];
///assign debug_out = debug_unknown_dword; // first unknown dword ///assign debug_out = debug_unknown_dword; // first unknown dword
assign debug_out[15: 0] = debug_to_first_err[19:4]; assign debug_out[ 4: 0] = debug_states_encoded;
assign debug_out[15: 5] = debug_to_first_err[14:4];
assign debug_out[31:16] = debug_rcvd_dword; assign debug_out[31:16] = debug_rcvd_dword;
......
...@@ -34,6 +34,11 @@ ...@@ -34,6 +34,11 @@
//`include "oob_ctrl.v" //`include "oob_ctrl.v"
//`include "gtx_wrap.v" //`include "gtx_wrap.v"
module sata_phy #( module sata_phy #(
`ifdef USE_DATASCOPE
parameter ADDRESS_BITS = 10, //for datascope
parameter DATASCOPE_START_BIT = 14, // bit of DRP "other_control" to start recording after 0->1 (needs DRP)
parameter DATASCOPE_POST_MEAS = 16, // number of measurements to perform after event
`endif
parameter DATA_BYTE_WIDTH = 4 parameter DATA_BYTE_WIDTH = 4
) )
( (
...@@ -84,6 +89,16 @@ module sata_phy #( ...@@ -84,6 +89,16 @@ module sata_phy #(
output usrpll_locked_debug, output usrpll_locked_debug,
output re_aligned, // re-aligned after alignment loss output re_aligned, // re-aligned after alignment loss
`ifdef USE_DATASCOPE
// Datascope interface (write to memory that can be software-read)
output datascope_clk,
output [ADDRESS_BITS-1:0] datascope_waddr,
output datascope_we,
output [31:0] datascope_di,
input datascope_trig, // external trigger event for the datascope
`endif
`ifdef USE_DRP `ifdef USE_DRP
input drp_rst, input drp_rst,
input drp_clk, input drp_clk,
...@@ -462,6 +477,11 @@ ext_clock_buf( ...@@ -462,6 +477,11 @@ ext_clock_buf(
); );
gtx_wrap #( gtx_wrap #(
`ifdef USE_DATASCOPE
.ADDRESS_BITS (ADDRESS_BITS), // for datascope
.DATASCOPE_START_BIT (DATASCOPE_START_BIT),
.DATASCOPE_POST_MEAS (DATASCOPE_POST_MEAS),
`endif
.DATA_BYTE_WIDTH (DATA_BYTE_WIDTH), .DATA_BYTE_WIDTH (DATA_BYTE_WIDTH),
.TXPMARESET_TIME (TXPMARESET_TIME), .TXPMARESET_TIME (TXPMARESET_TIME),
.RXPMARESET_TIME (RXPMARESET_TIME), .RXPMARESET_TIME (RXPMARESET_TIME),
...@@ -518,6 +538,14 @@ gtx_wrap ...@@ -518,6 +538,14 @@ gtx_wrap
.dbg_rxcdrlock (dbg_rxcdrlock) , .dbg_rxcdrlock (dbg_rxcdrlock) ,
.dbg_rxdlysresetdone(dbg_rxdlysresetdone), .dbg_rxdlysresetdone(dbg_rxdlysresetdone),
.txbufstatus (txbufstatus[1:0]) .txbufstatus (txbufstatus[1:0])
`ifdef USE_DATASCOPE
,.datascope_clk (datascope_clk), // output
.datascope_waddr (datascope_waddr), // output[9:0]
.datascope_we (datascope_we), // output
.datascope_di (datascope_di), // output[31:0]
.datascope_trig (datascope_trig) // inpuit // external trigger event for the datascope
`endif
`ifdef USE_DRP `ifdef USE_DRP
,.drp_rst (drp_rst), // input ,.drp_rst (drp_rst), // input
.drp_clk (drp_clk), // input .drp_clk (drp_clk), // input
...@@ -594,8 +622,13 @@ reg dbg_clk_align_wait; ...@@ -594,8 +622,13 @@ reg dbg_clk_align_wait;
//reg dbg_rxphaligndone_down; //reg dbg_rxphaligndone_down;
//reg dbg_rxphaligndone_second; //reg dbg_rxphaligndone_second;
reg [11:0] error_count;
always @ (posedge clk) begin always @ (posedge clk) begin
// if (!phy_ready) error_count <= 0;
if (rxelecidle) error_count <= 0;
else if (phy_ready && (|ll_err_out)) error_count <= error_count + 1;
if (rxelecidle || clk_phase_align_ack) dbg_clk_align_wait <= 0; if (rxelecidle || clk_phase_align_ack) dbg_clk_align_wait <= 0;
else if (clk_phase_align_req) dbg_clk_align_wait <= 1; else if (clk_phase_align_req) dbg_clk_align_wait <= 1;
...@@ -636,9 +669,14 @@ assign debug_sata[23:20] = debug_cntr4; ...@@ -636,9 +669,14 @@ assign debug_sata[23:20] = debug_cntr4;
//assign phy_ready = link_state & gtx_ready & rxbyteisaligned; //assign phy_ready = link_state & gtx_ready & rxbyteisaligned;
//assign debug_sata = {debug_cntr6,debug_cntr5}; //assign debug_sata = {debug_cntr6,debug_cntr5};
//assign debug_sata = {8'b0, dbg_clk_align_cntr, 1'b0, dbg_rxdlysresetdone, rxelecidle, dbg_rxcdrlock, rxelsfull, rxelsempty, dbg_rxphaligndone, dbg_rx_clocks_aligned}; //assign debug_sata = {8'b0, dbg_clk_align_cntr, 1'b0, dbg_rxdlysresetdone, rxelecidle, dbg_rxcdrlock, rxelsfull, rxelsempty, dbg_rxphaligndone, dbg_rx_clocks_aligned};
assign debug_sata = {8'b0, dbg_clk_align_cntr, txbufstatus[1:0], rxelecidle, dbg_rxcdrlock, rxelsfull, rxelsempty, dbg_rxphaligndone, dbg_rx_clocks_aligned}; `ifdef USE_DATASCOPE
assign debug_sata = {txbufstatus[1:0], rxelecidle, dbg_rxcdrlock, rxelsfull, rxelsempty, dbg_rxphaligndone, dbg_rx_clocks_aligned,
error_count,
2'b0,
datascope_waddr};
`else
assign debug_sata = {8'b0, dbg_clk_align_cntr, txbufstatus[1:0], rxelecidle, dbg_rxcdrlock, rxelsfull, rxelsempty, dbg_rxphaligndone, dbg_rx_clocks_aligned};
`endif
endmodule endmodule
This diff is collapsed.
[*] [*]
[*] GTKWave Analyzer v3.3.66 (w)1999-2015 BSI [*] GTKWave Analyzer v3.3.66 (w)1999-2015 BSI
[*] Fri Feb 12 00:55:27 2016 [*] Sat Feb 13 07:29:00 2016
[*] [*]
[dumpfile] "/home/andrey/git/x393_sata/simulation/tb_ahci-20160211173556344.fst" [dumpfile] "/home/andrey/git/x393_sata/simulation/tb_ahci-20160211141748402.fst"
[dumpfile_mtime] "Fri Feb 12 00:37:07 2016" [dumpfile_mtime] "Thu Feb 11 21:19:18 2016"
[dumpfile_size] 6893125 [dumpfile_size] 10518459
[savefile] "/home/andrey/git/x393_sata/tb_ahci_01.sav" [savefile] "/home/andrey/git/x393_sata/tb_ahci_01.sav"
[timestart] 852330 [timestart] 51557500
[size] 1823 1180 [size] 1823 1180
[pos] 0 0 [pos] 0 0
*-12.814444 869500 29549854 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 *-16.563877 51888300 29549854 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
[treeopen] tb_ahci. [treeopen] tb_ahci.
[treeopen] tb_ahci.axi_read_addr. [treeopen] tb_ahci.axi_read_addr.
[treeopen] tb_ahci.dev.linkMonitorFIS. [treeopen] tb_ahci.dev.linkMonitorFIS.
...@@ -31,7 +31,6 @@ ...@@ -31,7 +31,6 @@
[treeopen] tb_ahci.dut.sata_top.ahci_sata_layers_i.phy. [treeopen] tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.
[treeopen] tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap. [treeopen] tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.
[treeopen] tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.genblk1. [treeopen] tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.genblk1.
[treeopen] tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtxe2_channel_wrapper.
[treeopen] tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtxe2_channel_wrapper.gtx_gpl. [treeopen] tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtxe2_channel_wrapper.gtx_gpl.
[treeopen] tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtxe2_channel_wrapper.gtx_gpl.channel. [treeopen] tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtxe2_channel_wrapper.gtx_gpl.channel.
[treeopen] tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtxe2_channel_wrapper.gtx_gpl.channel.rx. [treeopen] tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtxe2_channel_wrapper.gtx_gpl.channel.rx.
...@@ -60,8 +59,8 @@ ...@@ -60,8 +59,8 @@
[treeopen] tb_ahci.simul_axi_hp_wr_i.waddr_i. [treeopen] tb_ahci.simul_axi_hp_wr_i.waddr_i.
[treeopen] tb_ahci.simul_axi_hp_wr_i.wdata_i. [treeopen] tb_ahci.simul_axi_hp_wr_i.wdata_i.
[treeopen] tb_ahci.simul_axi_read_i. [treeopen] tb_ahci.simul_axi_read_i.
[sst_width] 417 [sst_width] 296
[signals_width] 409 [signals_width] 313
[sst_expanded] 1 [sst_expanded] 1
[sst_vpaned_height] 573 [sst_vpaned_height] 573
@820 @820
...@@ -966,7 +965,7 @@ tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtxe2_channel_wrapper.gtx_g ...@@ -966,7 +965,7 @@ tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtxe2_channel_wrapper.gtx_g
-drp -drp
@1401200 @1401200
-axi_ahci_regs -axi_ahci_regs
@c00200 @c00201
-ahci_fsm -ahci_fsm
@28 @28
tb_ahci.dut.sata_top.ahci_top_i.ahci_fsm_i.dma_abort_done tb_ahci.dut.sata_top.ahci_top_i.ahci_fsm_i.dma_abort_done
...@@ -1233,7 +1232,7 @@ tb_ahci.dut.sata_top.ahci_top_i.ahci_fsm_i.async_pend_r[1:0] ...@@ -1233,7 +1232,7 @@ tb_ahci.dut.sata_top.ahci_top_i.ahci_fsm_i.async_pend_r[1:0]
@28 @28
tb_ahci.dut.sata_top.ahci_top_i.ahci_fsm_i.async_ackn tb_ahci.dut.sata_top.ahci_top_i.ahci_fsm_i.async_ackn
tb_ahci.dut.sata_top.ahci_top_i.ahci_fsm_i.async_from_st tb_ahci.dut.sata_top.ahci_top_i.ahci_fsm_i.async_from_st
@1401200 @1401201
-ahci_fsm -ahci_fsm
@c00200 @c00200
-ahci_fis_receive -ahci_fis_receive
...@@ -3449,6 +3448,7 @@ tb_ahci.elastic1632_slow_i.add_rclk ...@@ -3449,6 +3448,7 @@ tb_ahci.elastic1632_slow_i.add_rclk
tb_ahci.elastic1632_slow_i.skip_rclk tb_ahci.elastic1632_slow_i.skip_rclk
@8022 @8022
tb_ahci.elastic1632_slow_i.waddr[4:0] tb_ahci.elastic1632_slow_i.waddr[4:0]
tb_ahci.elastic1632_slow_i.raddr_r[4:0]
tb_ahci.elastic1632_slow_i.dbg_diff[4:0] tb_ahci.elastic1632_slow_i.dbg_diff[4:0]
@1401200 @1401200
-elastic_slow -elastic_slow
...@@ -3506,10 +3506,38 @@ tb_ahci.elastic1632_fast_i.correct_r[2:0] ...@@ -3506,10 +3506,38 @@ tb_ahci.elastic1632_fast_i.correct_r[2:0]
-group_end -group_end
@8022 @8022
tb_ahci.elastic1632_fast_i.waddr[4:0] tb_ahci.elastic1632_fast_i.waddr[4:0]
tb_ahci.elastic1632_fast_i.raddr_r[4:0]
tb_ahci.elastic1632_fast_i.dbg_diff[4:0] tb_ahci.elastic1632_fast_i.dbg_diff[4:0]
@1401200 @1401200
-elastic_fast -elastic_fast
@c00200 @c00200
-comma_align
@200
-
@22
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtx_comma_align.aligned_data[19:0]
@28
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtx_comma_align.clk
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtx_comma_align.comma
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtx_comma_align.comma_detected
@22
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtx_comma_align.comma_match[19:0]
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtx_comma_align.comma_match_p[19:0]
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtx_comma_align.comma_match_prev[19:0]
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtx_comma_align.comma_n[19:0]
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtx_comma_align.comma_p[19:0]
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtx_comma_align.indata[19:0]
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtx_comma_align.indata_r[19:0]
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtx_comma_align.outdata[19:0]
@28
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtx_comma_align.realign
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtx_comma_align.rst
@22
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtx_comma_align.shifted_window[19:0]
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.gtx_comma_align.window[38:0]
@1401200
-comma_align
@c00200
-oob_ctrl -oob_ctrl
@28 @28
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.oob_ctrl.gtx_ready tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.oob_ctrl.gtx_ready
...@@ -3644,7 +3672,7 @@ tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.txreset ...@@ -3644,7 +3672,7 @@ tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.txreset
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.rxreset tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.rxreset
@1401200 @1401200
-sipo_meas -sipo_meas
@800200 @c00200
-gtx -gtx
@28 @28
tb_ahci.dut.sata_top.ahci_top_i.axi_ahci_regs_i.drp_we tb_ahci.dut.sata_top.ahci_top_i.axi_ahci_regs_i.drp_we
...@@ -3671,14 +3699,6 @@ tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.rxphaligndone2_r ...@@ -3671,14 +3699,6 @@ tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.rxphaligndone2_r
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.rxphaligndone tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.rxphaligndone
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.rxdlysreset tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.rxdlysreset
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.rxdlysresetdone tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.rxdlysresetdone
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.xclk_gtx_g
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.xclk_gtx
@22
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.other_control[15:0]
@28
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.xclk
@29
tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.rxreset
@800200 @800200
-ttxdata_resynchro -ttxdata_resynchro
@28 @28
...@@ -3766,7 +3786,6 @@ tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.txdata_enc_out[19:0] ...@@ -3766,7 +3786,6 @@ tb_ahci.dut.sata_top.ahci_sata_layers_i.phy.gtx_wrap.txdata_enc_out[19:0]
- -
@1401200 @1401200
-gtx8x10enc -gtx8x10enc
@1000200
-gtx -gtx
@c00200 @c00200
-device -device
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment