Skip to content

X
x393
Commit d78693e5 authored by Andrey Filippov's avatar Andrey Filippov
Browse files
Options

simulating dct_iv8_1d

parent 5a4a62b0
Hide whitespace changes
Inline Side-by-side
Showing with 33 additions and 28 deletions
dsp/dct_iv8_1d.v
View file @ d78693e5
...@@ -43,7 +43,7 @@ ...@@ -43,7 +43,7 @@
module dct_iv8_1d#( module dct_iv8_1d#(
parameter WIDTH = 24, // input data width parameter WIDTH = 24, // input data width
parameter OUT_WIDTH = 16, // output deata width parameter OUT_WIDTH = 24, // 16, // output deata width
parameter OUT_RSHIFT = 3, // overall right shift of the result from input, aligned by MSB (>=3 will never cause saturation) parameter OUT_RSHIFT = 3, // overall right shift of the result from input, aligned by MSB (>=3 will never cause saturation)
parameter B_WIDTH = 18, parameter B_WIDTH = 18,
parameter A_WIDTH = 25, parameter A_WIDTH = 25,
...@@ -70,12 +70,12 @@ module dct_iv8_1d#( ...@@ -70,12 +70,12 @@ module dct_iv8_1d#(
input start, // one cycle before first X6 input input start, // one cycle before first X6 input
output [OUT_WIDTH -1:0] dout, output [OUT_WIDTH -1:0] dout,
output reg pre2_start_out, // 2 clock cycle before Y0 output, full dout sequence output reg pre2_start_out, // 2 clock cycle before Y0 output, full dout sequence
// start_out-x-Y0-x-Y7-x-Y1-x-Y6-x-Y3-x-Y4-x-Y2-x-Y5 // start_out-x-Y0-x-Y7-x-Y4-x-Y3-x-Y1-x-Y6-x-Y2-x-Y5
output reg en_out // valid at the same time slot as pre2_start_out (goes active with pre2_start_out) output reg en_out // valid at the same time slot as pre2_start_out (goes active with pre2_start_out)
); );
localparam RSHIFT1 = 2; // safe right shift for stage 1 localparam RSHIFT1 = 2; // safe right shift for stage 1
localparam STAGE1_RSHIFT = COSINE_SHIFT + (WIDTH - A_WIDTH) + RSHIFT1; // divide by 4 in stage 1 - never saturates localparam STAGE1_RSHIFT = COSINE_SHIFT + (WIDTH - A_WIDTH) + RSHIFT1; // divide by 4 in stage 1 - never saturates
localparam STAGE2_RSHIFT = COSINE_SHIFT + (OUT_WIDTH - WIDTH) +(OUT_RSHIFT-RSHIFT1); // divide by 4 in stage 1 - never saturates localparam STAGE2_RSHIFT = COSINE_SHIFT + (A_WIDTH - OUT_WIDTH) +(OUT_RSHIFT-RSHIFT1); // divide by 4 in stage 1 - never saturates
// STAGE2_RSHIFT should be >0 ( >=1 ) for rounding // STAGE2_RSHIFT should be >0 ( >=1 ) for rounding
// register files on the D-inputs of DSPs // register files on the D-inputs of DSPs
...@@ -99,8 +99,8 @@ module dct_iv8_1d#( ...@@ -99,8 +99,8 @@ module dct_iv8_1d#(
wire signed [A_WIDTH-1:0] dsp_din_1; wire signed [A_WIDTH-1:0] dsp_din_1;
reg dsp_ced_1; reg dsp_ced_1;
reg dsp_sela_1; reg dsp_sela_1;
// reg dsp_en_a_1; // Not used here 0: +/- D, 1: A or A +/- D // reg dsp_en_a_1; // Not used here 0: +/- D, 1: A or A +/- D
// reg dsp_en_d_1; // Not used here 0: A, 1: D or A +/- D // reg dsp_en_d_1; // Not used here 0: A, 1: D or A +/- D
reg dsp_sub_a_1; // reg dsp_sub_a_1; //
reg dsp_neg_m_1; // 1 - negate multiplier result reg dsp_neg_m_1; // 1 - negate multiplier result
reg dsp_accum_1; // 0 - use multiplier result, 1 add to accumulator reg dsp_accum_1; // 0 - use multiplier result, 1 add to accumulator
...@@ -137,7 +137,11 @@ module dct_iv8_1d#( ...@@ -137,7 +137,11 @@ module dct_iv8_1d#(
if (A_WIDTH > WIDTH) assign dsp_ain_1 = {{A_WIDTH-WIDTH{d_in[WIDTH-1]}},d_in}; if (A_WIDTH > WIDTH) assign dsp_ain_1 = {{A_WIDTH-WIDTH{d_in[WIDTH-1]}},d_in};
else assign dsp_ain_1 = d_in; // SuppressThisWarning VEditor (not implemented) else assign dsp_ain_1 = d_in; // SuppressThisWarning VEditor (not implemented)
endgenerate endgenerate
assign dsp_cin_1 = {{P_WIDTH-WIDTH{d_in[WIDTH-1]}},d_in}; // assign dsp_cin_1 = {{P_WIDTH-WIDTH{d_in[WIDTH-1]}},d_in};
// symmetrically lshift by COSINE_SHIFT (match multiplication by 1.0), add 0.5LSB for positive, subtract 0.5LSB for negative
wire din_zero = ~(|d_in);
assign dsp_cin_1 = {{P_WIDTH-WIDTH-COSINE_SHIFT{d_in[WIDTH-1]}},d_in,~d_in[WIDTH-1]^din_zero,{COSINE_SHIFT-1{d_in[WIDTH-1]}}};
//register files //register files
...@@ -163,33 +167,33 @@ module dct_iv8_1d#( ...@@ -163,33 +167,33 @@ module dct_iv8_1d#(
if (rst || (!run_in && !run_out)) phase_cnt <= 0; if (rst || (!run_in && !run_out)) phase_cnt <= 0;
else phase_cnt <= phase_cnt + 1; else phase_cnt <= phase_cnt + 1;
pre2_start_out <= run_out && (phase_cnt == 13); pre2_start_out <= run_out && (phase_cnt == 14);
en_out <= run_out && !phase_cnt[0]; en_out <= run_out && !phase_cnt[0];
// Cosine table, defined to fit into 17 bits for 18-bit signed DSP B-operand // Cosine table, defined to fit into 17 bits for 18-bit signed DSP B-operand
case (phase_cnt) case (phase_cnt)
4'h0: dsp_bin <= COS_07_32; 4'h0: dsp_bin <= COS_09_32;
4'h1: dsp_bin <= COS_09_32; 4'h1: dsp_bin <= COS_04_32;
4'h2: dsp_bin <= COS_04_32; 4'h2: dsp_bin <= COS_08_32;
4'h3: dsp_bin <= COS_08_32; 4'h3: dsp_bin <= COS_03_32;
4'h4: dsp_bin <= COS_05_32; 4'h4: dsp_bin <= COS_13_32;
4'h5: dsp_bin <= COS_11_32; 4'h5: dsp_bin <= COS_12_32;
4'h6: dsp_bin <= COS_12_32; 4'h6: dsp_bin <= 'bx;
4'h7: dsp_bin <= 'bx; 4'h7: dsp_bin <= COS_05_32;
4'h8: dsp_bin <= COS_13_32; 4'h8: dsp_bin <= COS_11_32;
4'h9: dsp_bin <= COS_03_32; 4'h9: dsp_bin <= 'bx;
4'ha: dsp_bin <= 'bx; 4'ha: dsp_bin <= COS_08_32;
4'hb: dsp_bin <= COS_08_32; 4'hb: dsp_bin <= COS_15_32;
4'hc: dsp_bin <= COS_15_32; 4'hc: dsp_bin <= COS_01_32;
4'hd: dsp_bin <= COS_01_32; 4'hd: dsp_bin <= COS_12_32;
4'he: dsp_bin <= COS_12_32; 4'he: dsp_bin <= 'bx;
4'hf: dsp_bin <= 'bx; 4'hf: dsp_bin <= COS_07_32;
endcase endcase
end end
// Control signals for each phase // Control signals for each phase
wire p00 = phase_cnt[3:0] == 0; wire p00 = (phase_cnt[3:0] == 0) && (run_in || run_out);
wire p01 = phase_cnt[3:0] == 1; wire p01 = phase_cnt[3:0] == 1;
wire p02 = phase_cnt[3:0] == 2; wire p02 = phase_cnt[3:0] == 2;
wire p03 = phase_cnt[3:0] == 3; wire p03 = phase_cnt[3:0] == 3;
...@@ -230,7 +234,7 @@ module dct_iv8_1d#( ...@@ -230,7 +234,7 @@ module dct_iv8_1d#(
dsp_cea1_2 <= p02 | p10 ; dsp_cea1_2 <= p02 | p10 ;
dsp_cea2_2 <= p04 | p12 ; dsp_cea2_2 <= p04 | p12 ;
dsp_sela_2 <= p00 | p02 | p04 | p06 | p08 | p10 | p12 | p14 ; //~phase[0] dsp_sela_2 <= p00 | p02 | p04 | p06 | p08 | p10 | p12 | p14 ; //~phase[0]
dsp_sub_a_2 <= p00 | p01 | p02 | p07 | p08 | p09 | p10 | p15 ; dsp_sub_a_2 <= p00 | p01 | p02 | p03 | p04 | p05 | p06 | p15 ;
dsp_ceb1_2 <= p00 | p03 | p08 | p11 ; dsp_ceb1_2 <= p00 | p03 | p08 | p11 ;
dsp_ceb2_2 <= p04 | p07 | p12 | p15 ; dsp_ceb2_2 <= p04 | p07 | p12 | p15 ;
dsp_selb_2 <= p00 | p03 | p05 | p06 | p08 | p11 | p13 | p14 ; dsp_selb_2 <= p00 | p03 | p05 | p06 | p08 | p11 | p13 | p14 ;
...@@ -250,7 +254,7 @@ module dct_iv8_1d#( ...@@ -250,7 +254,7 @@ module dct_iv8_1d#(
.ceb1 (dsp_ceb1_1), // input .ceb1 (dsp_ceb1_1), // input
.ceb2 (dsp_ceb2_1), // input .ceb2 (dsp_ceb2_1), // input
.selb (dsp_selb_1), // input .selb (dsp_selb_1), // input
.ain (dsp_din_1), // input[24:0] signed .ain (dsp_ain_1), // input[24:0] signed
.cea1 (dsp_cea1_1), // input .cea1 (dsp_cea1_1), // input
.cea2 (dsp_cea2_1), // input .cea2 (dsp_cea2_1), // input
.din (dsp_din_1), // input[24:0] signed .din (dsp_din_1), // input[24:0] signed
...@@ -278,7 +282,7 @@ module dct_iv8_1d#( ...@@ -278,7 +282,7 @@ module dct_iv8_1d#(
.ceb1 (dsp_ceb1_2), // input .ceb1 (dsp_ceb1_2), // input
.ceb2 (dsp_ceb2_2), // input .ceb2 (dsp_ceb2_2), // input
.selb (dsp_selb_2), // input .selb (dsp_selb_2), // input
.ain (dsp_din_2), // input[24:0] signed .ain (dsp_ain_2), // input[24:0] signed
.cea1 (dsp_cea1_2), // input .cea1 (dsp_cea1_2), // input
.cea2 (dsp_cea2_2), // input .cea2 (dsp_cea2_2), // input
.din (dsp_din_2), // input[24:0] signed .din (dsp_din_2), // input[24:0] signed
......
dsp/dsp_ma_preadd_c.v
View file @ d78693e5
...@@ -38,7 +38,8 @@ ...@@ -38,7 +38,8 @@
* with at least one of the Free Software programs. * with at least one of the Free Software programs.
*/ */
`timescale 1ns/1ps `timescale 1ns/1ps
//`undef INSTANTIATE_DSP48E1 //`define INSTANTIATE_DSP48E1
`undef INSTANTIATE_DSP48E1
module dsp_ma_preadd_c #( module dsp_ma_preadd_c #(
parameter B_WIDTH = 18, parameter B_WIDTH = 18,
parameter A_WIDTH = 25, parameter A_WIDTH = 25,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment