Commit cbd5dc78 authored by Andrey Filippov's avatar Andrey Filippov

More debugging, fixed file length calculation and embedded timestamp

parent 5641399a
......@@ -62,42 +62,42 @@
<link>
<name>vivado_logs/VivadoBitstream.log</name>
<type>1</type>
<location>/home/andrey/git/x393/vivado_logs/VivadoBitstream-20150919172017385.log</location>
<location>/home/andrey/git/x393/vivado_logs/VivadoBitstream-20150923173658295.log</location>
</link>
<link>
<name>vivado_logs/VivadoOpt.log</name>
<type>1</type>
<location>/home/andrey/git/x393/vivado_logs/VivadoOpt-20150919172017385.log</location>
<location>/home/andrey/git/x393/vivado_logs/VivadoOpt-20150923173658295.log</location>
</link>
<link>
<name>vivado_logs/VivadoOptPhys.log</name>
<type>1</type>
<location>/home/andrey/git/x393/vivado_logs/VivadoOptPhys-20150919172017385.log</location>
<location>/home/andrey/git/x393/vivado_logs/VivadoOptPhys-20150923173658295.log</location>
</link>
<link>
<name>vivado_logs/VivadoOptPower.log</name>
<type>1</type>
<location>/home/andrey/git/x393/vivado_logs/VivadoOptPower-20150919172017385.log</location>
<location>/home/andrey/git/x393/vivado_logs/VivadoOptPower-20150923173658295.log</location>
</link>
<link>
<name>vivado_logs/VivadoPlace.log</name>
<type>1</type>
<location>/home/andrey/git/x393/vivado_logs/VivadoPlace-20150919172017385.log</location>
<location>/home/andrey/git/x393/vivado_logs/VivadoPlace-20150923173658295.log</location>
</link>
<link>
<name>vivado_logs/VivadoRoute.log</name>
<type>1</type>
<location>/home/andrey/git/x393/vivado_logs/VivadoRoute-20150919172017385.log</location>
<location>/home/andrey/git/x393/vivado_logs/VivadoRoute-20150923173658295.log</location>
</link>
<link>
<name>vivado_logs/VivadoSynthesis.log</name>
<type>1</type>
<location>/home/andrey/git/x393/vivado_logs/VivadoSynthesis-20150919164827543.log</location>
<location>/home/andrey/git/x393/vivado_logs/VivadoSynthesis-20150923170916067.log</location>
</link>
<link>
<name>vivado_logs/VivadoTimimgSummaryReportImplemented.log</name>
<type>1</type>
<location>/home/andrey/git/x393/vivado_logs/VivadoTimimgSummaryReportImplemented-20150919172017385.log</location>
<location>/home/andrey/git/x393/vivado_logs/VivadoTimimgSummaryReportImplemented-20150923173658295.log</location>
</link>
<link>
<name>vivado_logs/VivadoTimimgSummaryReportSynthesis.log</name>
......
......@@ -36,6 +36,8 @@ module cmprs_frame_sync#(
input cmprs_en, // @mclk 0 resets immediately
output cmprs_en_extend, // @mclk keep compressor enabled for graceful shutdown
// TODO: delay vsync_late if still compressing previous frame in multi-frame buffer mode
input cmprs_run, // @mclk enable propagation of vsync_late to frame_start_dst in bonded(sync to src) mode
input cmprs_standalone, // @mclk single-cycle: generate a single frame_start_dst in unbonded (not synchronized) mode.
// cmprs_run should be off
......
......@@ -311,7 +311,7 @@ module jp_channel#(
wire [3:0] huff_dl; // output[3:0] reg
wire huff_dv; // output reg
wire flush; // output reg @ negedge xclk2x
wire last_block; // @negedge xxlk2x - used to copy timestamp in stuffer
wire [31:0] cmd_data; // 32-bit data to write to tables and registers(LSB first) - from cmd_deser
......@@ -362,11 +362,15 @@ module jp_channel#(
reg dbg_stuffer_ext_running;
reg dbg_reset_fifo;
wire [3:0] etrax_dma;
wire dbg_ts_rstb; // output
wire [7:0] dbg_ts_dout; //output [7:0]
wire [31:0] dbg_sec;
wire [31:0] dbg_usec;
wire dbg_flushing;
reg dbg_flush_hclk;
reg dbg_en_hclk;
wire dbg_last_block;
reg dbg_en_n2x;
reg dbg_last_block_persist;
wire dbg_test_lbw;
......@@ -383,6 +387,14 @@ module jp_channel#(
wire [2:0] dbg_block_mem_wa;
wire [2:0] dbg_block_mem_wa_save;
timestamp_to_parallel dbg_timestamp_to_parallel_i (
.clk (~xclk2x), // input
.pre_stb (dbg_ts_rstb), // input
.tdata (dbg_ts_dout), // input[7:0]
.sec (dbg_sec), // output[31:0] reg
.usec (dbg_usec), // output[19:0] reg
.done() // output
);
// cmprs_standalone - use to reset flush
......@@ -394,7 +406,7 @@ module jp_channel#(
dbg_en_n2x <= stuffer_en;
if (!dbg_en_n2x) dbg_last_block_persist <= 0;
else if (dbg_last_block) dbg_last_block_persist <= 1;
else if (last_block) dbg_last_block_persist <= 1;
if (!dbg_en_n2x) dbg_gotLastBlock_persist <= 0;
else if (dbg_gotLastBlock) dbg_gotLastBlock_persist <= 1;
......@@ -454,8 +466,8 @@ module jp_channel#(
//frame_start_dst
debug_slave #(
.SHIFT_WIDTH (320),
.READ_WIDTH (320),
.SHIFT_WIDTH (384),
.READ_WIDTH (384),
.WRITE_WIDTH (32),
.DEBUG_CMD_LATENCY (DEBUG_CMD_LATENCY)
) debug_slave_i (
......@@ -465,6 +477,8 @@ module jp_channel#(
.debug_sl (debug_sl), // input
.debug_do (debug_do), // output
.rd_data ({
dbg_usec,
dbg_sec,
26'h0, dbg_block_mem_wa_save[2:0],dbg_block_mem_wa[2:0],
dbg_zds_cntr[15:0],
dbg_stb_cntr[15:0],
......@@ -476,7 +490,7 @@ module jp_channel#(
pages_requested[15:0],
dbg_comp_lastinmbo, dbg_block_mem_ra[2:0], debug_fifo_out[27:0],
debug_fifo_in[31:0],
color_last, dbg_last_block_persist, dbg_gotLastBlock, dbg_test_lbw, dbg_last_block,
color_last, dbg_last_block_persist, dbg_gotLastBlock, dbg_test_lbw, last_block,
dbg_flush_hclk, dbg_flushing, stuffer_rdy, etrax_dma[3:0], dbg_stuffer_ext_running, stuffer_running_mclk, debug_frame_done, reading_frame,
fifo_count[7:0],
2'b0, dbg_fifo_or_full, dbg_gotLastBlock_persist, dbg_lastBlock_sent, dbg_last_DCAC, sigle_frame_buf, suspend,
......@@ -1054,12 +1068,11 @@ module jp_channel#(
.dl (huff_dl[3:0]), // output[3:0] reg
.dv (huff_dv), // output reg
.flush (flush), // output reg
.last_block (last_block), // output reg
`ifdef DEBUG_RING
.last_block (dbg_last_block), // output reg unused does not get out
.test_lbw (dbg_test_lbw), // output reg ??
.gotLastBlock (dbg_gotLastBlock), // output ?? - unused (was for debug)
`else
.last_block (), // output reg unused
.test_lbw (), // output reg ??
.gotLastBlock (), // output ?? - unused (was for debug)
`endif
......@@ -1078,7 +1091,7 @@ module jp_channel#(
.mclk (mclk), // input
.mrst (mrst), // input
.xrst (xrst), // input
.last_block (last_block), // input @negedge xclk2x - use it to copy timestamp from fifo
.ts_pre_stb (ts_pre_stb), // input 1 cycle before timestamp data, @mclk
.ts_data (ts_data), // input[7:0] 8-byte timestamp data (s0,s1,s2,s3,us0,us1,us2,us3==0)
.color_first (color_first), // input valid @xclk - only for sec/usec
......@@ -1102,7 +1115,10 @@ module jp_channel#(
`endif
.running (stuffer_running) // from registering timestamp until done
`ifdef DEBUG_RING
, .dbg_etrax_dma (etrax_dma)
, .dbg_etrax_dma (etrax_dma)
,.dbg_ts_rstb (dbg_ts_rstb) // output
,.dbg_ts_dout (dbg_ts_dout) //output [7:0]
`endif
`ifdef debug_stuffer
,.etrax_dma_r(tst_stuf_etrax[3:0]) // [3:0] just for testing
......@@ -1110,7 +1126,11 @@ module jp_channel#(
,.test_cntr1(test_cntr1[7:0])
`endif
);
/*
,output dbg_ts_rstb
,output [7:0] dbg_ts_dout
*/
pulse_cross_clock stuffer_done_mclk_i (.rst(xrst2xn), .src_clk(~xclk2x), .dst_clk(mclk), .in_pulse(stuffer_done), .out_pulse(stuffer_done_mclk),.busy());
cmprs_out_fifo cmprs_out_fifo_i (
// .rst (rst), // input mostly for simulation
......
......@@ -46,6 +46,8 @@ module stuffer393 (
input mclk,
input mrst, // @posedge mclk, sync reset
input xrst, // @posedge xclk, sync reset
input last_block, // use it to copy timestamp from fifo
// time stamping - will copy time at the end of color_first (later than the first hact after vact in the current frame, but before the next one
// and before the data is needed for output
......@@ -73,14 +75,24 @@ module stuffer393 (
output reg running // from registering timestamp until done
`ifdef DEBUG_RING
, output reg [3:0] dbg_etrax_dma
,output dbg_ts_rstb
,output [7:0] dbg_ts_dout
`endif
`ifdef debug_stuffer
, output reg [3:0] etrax_dma_r // [3:0] just for testing
, output reg [3:0] test_cntr,
output reg [7:0] test_cntr1
`endif
);
`ifdef DEBUG_RING
assign dbg_ts_rstb = ts_rstb;
assign dbg_ts_dout = ts_dout;
`endif
//etrax_dma[3:0]
`ifdef debug_stuffer
reg en_d;
......@@ -120,7 +132,7 @@ module stuffer393 (
reg busy_eob; // flushing and sending length
reg trailer; // sending out data length and 32 bytes for ETRAX
reg was_trailer; // sending out data length and 32 bytes for ETRAX
reg last_block_d; // last_block delayed by one clock
reg [ 3:0] etrax_dma; // count words to make total size multiple of 32 bytes.
// Last 4 bytes of data will have actual length in bytes
// There will always be at least 4 more bytes (0-es) before length - needed for software
......@@ -157,9 +169,10 @@ module stuffer393 (
wire stb_start; // re-clocked color_first
assign ts_rstb = trailer && !was_trailer; // enough time to have timestamp data
// assign ts_rstb = trailer && !was_trailer; // enough time to have timestamp data
assign ts_rstb = last_block && !last_block_d; // enough time to have timestamp data
always @ (negedge clk) begin
// ts_cycles <= {ts_cycles[6:0],ts_rstb};
last_block_d <= last_block;
ts_cycles <= {ts_cycles[5:0],ts_rstb};
if (ts_cycles[0]) sec_r[ 7: 0] <= ts_dout;
else if (start_sizeout) sec_r[ 7: 0] <= size_count[ 7:0];
......
parameter FPGA_VERSION = 32'h03930035;
\ No newline at end of file
parameter FPGA_VERSION = 32'h03930038;
\ No newline at end of file
This source diff could not be displayed because it is too large. You can view the blob instead.
......@@ -109,6 +109,7 @@ class X393CmprsAfi(object):
@param channel - AFI input channel (0..3) - with 2 AFIs - 0..1 only
@return - memory segments (1 or two) with image data, timestamp in numeric and string format
"""
print ("\n------------ channel %d --------------"%(channel))
print ("x393_sens_cmprs.GLBL_WINDOW = ", x393_sens_cmprs.GLBL_WINDOW)
if (self.DRY_MODE):
return None
......@@ -130,10 +131,31 @@ class X393CmprsAfi(object):
print ("Failed to get 0xff marker at offset 0x%08x - length word = 0x%08x)"%(cirbuf_start + last_image_chunk + (0x20 - CCAM_MMAP_META_LENGTH) + 3,len32))
return None
len32 &= 0xffffff
inserted_bytes = (32 - (((len32 % 32) + CCAM_MMAP_META) % 32)) % 32
# inserted_bytes = (32 - (((len32 % 32) + CCAM_MMAP_META) % 32)) % 32
#adjusting to actual...
# ADJUSTMENT = 2
ADJUSTMENT = 4 # ???
inserted_bytes = ((32 - (((len32 % 32) + CCAM_MMAP_META) % 32) - ADJUSTMENT) % 32 ) + ADJUSTMENT
img_start = last_image_chunk + 32 - CCAM_MMAP_META - inserted_bytes - len32
if img_start < 0:
img_start += circbuf_len
if verbose >0:
for a in range ( img_start, img_start + 0x10, 4):
d = self.x393_mem.read_mem(cirbuf_start + a)
if (a % 16) == 0:
print ("\n%08x: "%(a),end ="" )
print("%02x %02x %02x %02x "%(d & 0xff, (d >> 8) & 0xff, (d >> 16) & 0xff, (d >> 24) & 0xff), end = "")
print("\n...",end="")
for a0 in range ( last_image_chunk - 0x10, last_image_chunk + 0x20, 4):
a = a0
if (a < 0):
a -=circbuf_len
d = self.x393_mem.read_mem(cirbuf_start + a)
if (a % 16) == 0:
print ("\n%08x: "%(a),end ="" )
print("%02x %02x %02x %02x "%(d & 0xff, (d >> 8) & 0xff, (d >> 16) & 0xff, (d >> 24) & 0xff), end = "")
print()
sec = self.x393_mem.read_mem(cirbuf_start + last_image_chunk + (0x20 - CCAM_MMAP_META_SEC))
usec = self.x393_mem.read_mem(cirbuf_start + last_image_chunk + (0x20 - CCAM_MMAP_META_USEC))
fsec=sec + usec/1000000.0
......
......@@ -628,29 +628,63 @@ class X393Jpeg(object):
"quantization":qtables["fpga"],
"huffman": self.huff_tables[FPGA_HUFFMAN_TABLE]}
def jpeg_write(self,
file_path = "/www/pages/img.jpeg",
file_path = "img.jpeg",
channel = 0,
y_quality = 100, #80,
c_quality = None,
portrait = False,
color_mode = 0,
byrshift = 0,
server_root = "/www/pages/",
verbose = 1):
"""
Create JPEG image from the latest acquired in the camera
@param file_path - camera file system path
@param file_path - camera file system path (starts with "/") or relative to web server root
@param channel - compressor channel
@param y_quality - 1..100 - quantization quality for Y component
@param c_quality - 1..100 - quantization quality for color components (None - use y_quality)
@param portrait - False - use normal order, True - transpose for portrait mode images
@param color_mode - one of the image formats (jpeg, jp4,)
@param byrshift - Bayer shift
@param server_root - files ystem path to the web server root directory
@param verbose - verbose level
"""
allFiles = False
if file_path[0] == "/":
server_root = "" # just do not add anything
try:
if (channel == all) or (channel[0].upper() == "A"): #all is a built-in function
for channel in range(4):
self.jpeg_write (file_path = file_path.replace(".","_%d."%channel),
allFiles = True
except:
pass
if allFiles:
html_text = """
<html>
<head>
<title></title>
<meta content="">
<style>
table { border-collapse: collapse;}
table td, table th {padding: 0;}
</style>
</head>
<body>
<table>
<tr>"""
html_text_td = """
<td><a href="%s"><img src="%s" style="image-orientation: 270deg; width:100%%; height:auto;" /></a></td>"""
html_text_finish = """
</tr>
</table>
</body>
</html>"""
for channel in (3,2,0,1): #range(4):
file_path_mod = file_path.replace(".","_%d."%channel)
if verbose > 1:
print(html_text_td)
html_text += html_text_td%(file_path_mod,file_path_mod)
self.jpeg_write (file_path = file_path_mod,
channel = channel,
y_quality = y_quality, #80,
c_quality = c_quality,
......@@ -658,9 +692,19 @@ class X393Jpeg(object):
color_mode = color_mode,
byrshift = byrshift,
verbose = verbose)
html_text += html_text_finish
if server_root:
dotpos = file_path.rfind(".")
if dotpos <0:
html_name = file_path + ".html"
else:
html_name = file_path[:dotpos] + ".html"
if verbose > 1:
print ("path = ",server_root+html_name)
print ("text = ",html_text)
with open (server_root+html_name, "w+b") as bf:
bf.write(html_text)
return
except:
pass
jpeg_data = self.jpegheader_create (
y_quality = y_quality,
......@@ -680,7 +724,7 @@ class X393Jpeg(object):
print ("meta = ",meta)
for s in meta["segments"]:
print ("start_address = 0x%x, length = 0x%x"%(s[0],s[1]))
with open (file_path, "w+b") as bf:
with open (server_root+file_path, "w+b") as bf:
bf.write(jpeg_data["header"])
for s in meta["segments"]:
print ("start_address = 0x%x, length = 0x%x"%(s[0],s[1]))
......@@ -885,12 +929,14 @@ compressor_control all 2
#jpeg_write "/www/pages/img2.jpeg" 2
#jpeg_write "/www/pages/img3.jpeg" 3
jpeg_write "img.jpeg" all
jpeg_write "/www/pages/img.jpeg" all
#changing quality (example 85%):
set_qtables all 0 85
compressor_control all 2
jpeg_write "/www/pages/img.jpeg" all 85
jpeg_write "img.jpeg" all 85
-----
......@@ -924,9 +970,12 @@ write_sensor_i2c 3 1 0 0x90350008
write_sensor_i2c 3 1 0 0x902c0008
write_sensor_i2c 3 1 0 0x902d001f
print_debug 0x35 ox66
set_qtables all 0 90
jpeg_write "/www/pages/img.jpeg" all
compressor_control all None 1
compressor_control all None 0
mem_save "/usr/local/verilog/memdump_chn0" 0x27a00000 0x01001000
"""
......@@ -968,7 +968,7 @@ class X393SensCmprs(object):
def print_debug( self,
first = None,
last = None,
num32 = 100):
num32 = 200):
"""
Read and print serial debug ring as a sequence of 32-bit numbers
@parame first - index of the first 32-bit debug word to decode
......@@ -1097,7 +1097,9 @@ class X393SensCmprs(object):
("dbg_zds_cntr", 16),
("dbg_block_mem_wa", 3),
("dbg_block_mem_wa_save",3),
(None, 26)
(None, 26),
("dbg_sec", 32),
("dbg_usec", 32)
),
"cmprs_afi_mux": (("fifo_count0", 8),
(None, 24),
......@@ -1124,7 +1126,13 @@ class X393SensCmprs(object):
flat = flatten_debug(None,"x393")
maximal_name_length = max([len(f[0]) for f in flat if f[0] is not None])
if first == "list":
num_bits=0;
for p in flat:
num_bits += p[1]
num_words = num_bits// 32
if num_bits % 32:
num_words += 1
if (first == list) or (first == "list"):
l=0;
for p in flat:
print (("%03x.%02x: %"+str(maximal_name_length)+"s")%(l // 32, l % 32, p[0]))
......@@ -1156,13 +1164,18 @@ class X393SensCmprs(object):
if (last is None) or (last > (num32-1)):
last = (num32-1)
for i,d in enumerate (status):
if d == 0xffffffff:
if i <= last:
last = i - 1
break
if (last is None) or (last > (num_words-1)):
last = (num_words-1)
# if (num_words)
# for i,d in enumerate (status):
# if d == 0xffffffff:
# if i <= last:
# last = i - 1
# break
# print("first = ",first)
# print ("last = ",last)
# print("total bits: ", l)
# print("total words32: ", l // 32)
l=0;
long_status = 0;
for i,s in enumerate(status):
......
......@@ -2,7 +2,7 @@
`ifndef SYSTEM_DEFINES
`define SYSTEM_DEFINES
`define PRELOAD_BRAMS
// `define DEBUG_RING 1
`define DEBUG_RING 1
`define MEMBRIDGE_DEBUG_WRITE 1
// Enviroment-dependent options
`ifdef IVERILOG
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment