Commit 9afdf9d6 authored by Andrey Filippov's avatar Andrey Filippov

continue with test fixture

parent 38eedfcf
...@@ -116,8 +116,9 @@ ...@@ -116,8 +116,9 @@
localparam STATUS_MSB_RSHFT= 2; // status bits [25:2] are read through [23:0] localparam STATUS_MSB_RSHFT= 2; // status bits [25:2] are read through [23:0]
localparam STATUS_PSHIFTER_RDY_MASK = 1<<STATUS_2LSB_SHFT; localparam STATUS_PSHIFTER_RDY_MASK = 1<<STATUS_2LSB_SHFT;
localparam FRAME_START_ADDRESS= 'h1000; // RA=80, CA=0, BA=0 22-bit frame start address (3 CA LSBs==0. BA==0) localparam FRAME_START_ADDRESS= 'h1000; // RA=80, CA=0, BA=0 22-bit frame start address (3 CA LSBs==0. BA==0)
localparam FRAME_FULL_WIDTH= 'h0c0; // Padded line length (8-row increment), in 8-bursts (16 bytes) localparam FRAME_START_ADDRESS_INC= 'h 800;
localparam FRAME_FULL_WIDTH= 'h0c0; // Padded line length (8-row increment), in 8-bursts (16 bytes)
// localparam AFI_LO_ADDR64= 'h4000; // start of the system memory range in 64-bit words // localparam AFI_LO_ADDR64= 'h4000; // start of the system memory range in 64-bit words
// localparam AFI_SIZE64= 'h4000; // size of system memory range in 64-bit words // localparam AFI_SIZE64= 'h4000; // size of system memory range in 64-bit words
......
...@@ -216,10 +216,12 @@ ...@@ -216,10 +216,12 @@
parameter MCNTRL_SCANLINE_MODE= 'h0, // set mode register: {extra_pages[1:0],enable,!reset} parameter MCNTRL_SCANLINE_MODE= 'h0, // set mode register: {extra_pages[1:0],enable,!reset}
parameter MCNTRL_SCANLINE_STATUS_CNTRL= 'h1, // control status reporting parameter MCNTRL_SCANLINE_STATUS_CNTRL= 'h1, // control status reporting
parameter MCNTRL_SCANLINE_STARTADDR= 'h2, // 22-bit frame start address (3 CA LSBs==0. BA==0) parameter MCNTRL_SCANLINE_STARTADDR= 'h2, // 22-bit frame start address (3 CA LSBs==0. BA==0)
parameter MCNTRL_SCANLINE_FRAME_FULL_WIDTH= 'h3, // Padded line length (8-row increment), in 8-bursts (16 bytes) parameter MCNTRL_SCANLINE_FRAME_SIZE= 'h3, // 22-bit frame start address increment (3 CA LSBs==0. BA==0)
parameter MCNTRL_SCANLINE_WINDOW_WH= 'h4, // low word - 13-bit window width (0->'h4000), high word - 16-bit frame height (0->'h10000) parameter MCNTRL_SCANLINE_FRAME_LAST= 'h4, // 16-bit last frame number in the buffer
parameter MCNTRL_SCANLINE_WINDOW_X0Y0= 'h5, // low word - 13-bit window left, high word - 16-bit window top parameter MCNTRL_SCANLINE_FRAME_FULL_WIDTH= 'h5, // Padded line length (8-row increment), in 8-bursts (16 bytes)
parameter MCNTRL_SCANLINE_WINDOW_STARTXY= 'h6, // low word - 13-bit start X (relative to window), high word - 16-bit start y parameter MCNTRL_SCANLINE_WINDOW_WH= 'h6, // low word - 13-bit window width (0->'h4000), high word - 16-bit frame height (0->'h10000)
parameter MCNTRL_SCANLINE_WINDOW_X0Y0= 'h7, // low word - 13-bit window left, high word - 16-bit window top
parameter MCNTRL_SCANLINE_WINDOW_STARTXY= 'h8, // low word - 13-bit start X (relative to window), high word - 16-bit start y
// Start XY can be used when read command to start from the middle // Start XY can be used when read command to start from the middle
// TODO: Add number of blocks to R/W? (blocks can be different) - total length? // TODO: Add number of blocks to R/W? (blocks can be different) - total length?
// Read back current address (for debugging)? // Read back current address (for debugging)?
...@@ -239,14 +241,17 @@ ...@@ -239,14 +241,17 @@
parameter MCNTRL_TILED_MODE= 'h0, // set mode register: {extra_pages[1:0],write_mode,enable,!reset} parameter MCNTRL_TILED_MODE= 'h0, // set mode register: {extra_pages[1:0],write_mode,enable,!reset}
parameter MCNTRL_TILED_STATUS_CNTRL= 'h1, // control status reporting parameter MCNTRL_TILED_STATUS_CNTRL= 'h1, // control status reporting
parameter MCNTRL_TILED_STARTADDR= 'h2, // 22-bit frame start address (3 CA LSBs==0. BA==0) parameter MCNTRL_TILED_STARTADDR= 'h2, // 22-bit frame start address (3 CA LSBs==0. BA==0)
parameter MCNTRL_TILED_FRAME_FULL_WIDTH='h3, // Padded line length (8-row increment), in 8-bursts (16 bytes) parameter MCNTRL_TILED_FRAME_SIZE= 'h3, // 22-bit frame start address increment (3 CA LSBs==0. BA==0)
parameter MCNTRL_TILED_WINDOW_WH= 'h4, // low word - 13-bit window width (0->'h4000), high word - 16-bit frame height (0->'h10000) parameter MCNTRL_TILED_FRAME_LAST= 'h4, // 16-bit last frame number in the buffer
parameter MCNTRL_TILED_WINDOW_X0Y0= 'h5, // low word - 13-bit window left, high word - 16-bit window top parameter MCNTRL_TILED_FRAME_FULL_WIDTH='h5, // Padded line length (8-row increment), in 8-bursts (16 bytes)
parameter MCNTRL_TILED_WINDOW_STARTXY= 'h6, // low word - 13-bit start X (relative to window), high word - 16-bit start y parameter MCNTRL_TILED_WINDOW_WH= 'h6, // low word - 13-bit window width (0->'h4000), high word - 16-bit frame height (0->'h10000)
parameter MCNTRL_TILED_WINDOW_X0Y0= 'h7, // low word - 13-bit window left, high word - 16-bit window top
parameter MCNTRL_TILED_WINDOW_STARTXY= 'h8, // low word - 13-bit start X (relative to window), high word - 16-bit start y
// Start XY can be used when read command to start from the middle // Start XY can be used when read command to start from the middle
// TODO: Add number of blocks to R/W? (blocks can be different) - total length? // TODO: Add number of blocks to R/W? (blocks can be different) - total length?
// Read back current address (for debugging)? // Read back current address (for debugging)?
parameter MCNTRL_TILED_TILE_WHS= 'h7, // low word - 6-bit tile width in 8-bursts, high - tile height (0 - > 64) parameter MCNTRL_TILED_TILE_WHS= 'h9, // low byte - 6-bit tile width in 8-bursts, second byte - tile height (0 - > 64),
// 3-rd byte - vertical step (to control tile vertical overlap)
parameter MCNTRL_TILED_STATUS_REG_CHN2_ADDR= 'h5, parameter MCNTRL_TILED_STATUS_REG_CHN2_ADDR= 'h5,
parameter MCNTRL_TILED_STATUS_REG_CHN4_ADDR= 'h7, parameter MCNTRL_TILED_STATUS_REG_CHN4_ADDR= 'h7,
parameter MCNTRL_TILED_PENDING_CNTR_BITS=2, // Number of bits to count pending trasfers, currently 2 is enough, but may increase parameter MCNTRL_TILED_PENDING_CNTR_BITS=2, // Number of bits to count pending trasfers, currently 2 is enough, but may increase
...@@ -282,6 +287,15 @@ ...@@ -282,6 +287,15 @@
parameter MCNTRL_TEST01_STATUS_REG_CHN2_ADDR= 'h3d, // status/readback register for channel 3 parameter MCNTRL_TEST01_STATUS_REG_CHN2_ADDR= 'h3d, // status/readback register for channel 3
parameter MCNTRL_TEST01_STATUS_REG_CHN3_ADDR= 'h3e, // status/readback register for channel 4 parameter MCNTRL_TEST01_STATUS_REG_CHN3_ADDR= 'h3e, // status/readback register for channel 4
parameter MCNTRL_TEST01_STATUS_REG_CHN4_ADDR= 'h3f, // status/readback register for channel 4 parameter MCNTRL_TEST01_STATUS_REG_CHN4_ADDR= 'h3f, // status/readback register for channel 4
parameter MCONTR_SENS_BASE = 'h680, // .. 'h6bf
parameter MCONTR_SENS_INC = 'h10,
parameter MCONTR_CMPRS_BASE = 'h6c0, // .. 'h6ff
parameter MCONTR_CMPRS_INC = 'h10,
parameter MCONTR_SENS_STATUS_BASE = 'h28, // .. 'h2b
parameter MCONTR_SENS_STATUS_INC = 'h1,
parameter MCONTR_CMPRS_STATUS_BASE = 'h2c, // .. 'h2f
parameter MCONTR_CMPRS_STATUS_INC = 'h1,
// membridge module parameters // membridge module parameters
parameter MEMBRIDGE_ADDR= 'h200, parameter MEMBRIDGE_ADDR= 'h200,
...@@ -338,9 +352,9 @@ ...@@ -338,9 +352,9 @@
parameter SENSI2C_CMD_DLY = 8, // [7:0] - duration of quater i2c cycle (if 0, [3:0] control SCL+SDA) parameter SENSI2C_CMD_DLY = 8, // [7:0] - duration of quater i2c cycle (if 0, [3:0] control SCL+SDA)
parameter SENSI2C_CMD_DLY_PBITS = 8, parameter SENSI2C_CMD_DLY_PBITS = 8,
// direct control of SDA/SCL mutually exclusive with DLY control, disabled by running i2c // direct control of SDA/SCL mutually exclusive with DLY control, disabled by running i2c
parameter SENSI2C_CMD_SCL = 0, // [1:0] : 0: NOP, 1: 1'b0->SCL, 2: 1'b1->SCL, 3: 1'bz -> SCL parameter SENSI2C_CMD_SCL = 16, // [17:16] : 0: NOP, 1: 1'b0->SCL, 2: 1'b1->SCL, 3: 1'bz -> SCL
parameter SENSI2C_CMD_SCL_WIDTH = 2, parameter SENSI2C_CMD_SCL_WIDTH = 2,
parameter SENSI2C_CMD_SDA = 2, // [3:2] : 0: NOP, 1: 1'b0->SDA, 2: 1'b1->SDA, 3: 1'bz -> SDA, parameter SENSI2C_CMD_SDA = 18, // [19:18] : 0: NOP, 1: 1'b0->SDA, 2: 1'b1->SDA, 3: 1'bz -> SDA,
parameter SENSI2C_CMD_SDA_WIDTH = 2, parameter SENSI2C_CMD_SDA_WIDTH = 2,
parameter SENSI2C_STATUS = 'h1, parameter SENSI2C_STATUS = 'h1,
...@@ -602,8 +616,8 @@ ...@@ -602,8 +616,8 @@
parameter CAMSYNC_TRIG_DELAY2 = 'h6, // setup input trigger delay parameter CAMSYNC_TRIG_DELAY2 = 'h6, // setup input trigger delay
parameter CAMSYNC_TRIG_DELAY3 = 'h7, // setup input trigger delay parameter CAMSYNC_TRIG_DELAY3 = 'h7, // setup input trigger delay
parameter CAMSYNC_SNDEN_BIT = 'h1, // enable writing ts_snd_en parameter CAMSYNC_SNDEN_BIT = 'h1, // enable writing ts_snd_en
parameter CAMSYNC_EXTERNAL_BIT = 'h3, // enable writing ts_external parameter CAMSYNC_EXTERNAL_BIT = 'h3, // enable writing ts_external (0 - local timestamp in the frame header)
parameter CAMSYNC_TRIGGERED_BIT = 'h5, // enable writing ts_external parameter CAMSYNC_TRIGGERED_BIT = 'h5, // triggered mode ( 0- async)
parameter CAMSYNC_MASTER_BIT = 'h8, // select a 2-bit master channel (master delay may be used as a flash delay) parameter CAMSYNC_MASTER_BIT = 'h8, // select a 2-bit master channel (master delay may be used as a flash delay)
parameter CAMSYNC_CHN_EN_BIT = 'hd, // per-channel enable timestamp generation parameter CAMSYNC_CHN_EN_BIT = 'hd, // per-channel enable timestamp generation
parameter CAMSYNC_PRE_MAGIC = 6'b110100, parameter CAMSYNC_PRE_MAGIC = 6'b110100,
......
...@@ -46,5 +46,14 @@ ...@@ -46,5 +46,14 @@
parameter SENSOR12BITS_TDDO = 2, // some confusion here - let's assume that it is from DCLK to Data out parameter SENSOR12BITS_TDDO = 2, // some confusion here - let's assume that it is from DCLK to Data out
parameter SENSOR12BITS_TDDO1 = 5, // parameter SENSOR12BITS_TDDO1 = 5, //
parameter SENSOR12BITS_TRIGDLY = 8, // delay between trigger input and start of output (VACT) in lines parameter SENSOR12BITS_TRIGDLY = 8, // delay between trigger input and start of output (VACT) in lines
parameter SENSOR12BITS_RAMP = 1, // 1 - ramp, 0 - random (now - sensor.dat) parameter SENSOR12BITS_RAMP = 1, // 1 - ramp, 0 - random (now - sensor.dat)
parameter SENSOR12BITS_NEW_BAYER = 0 // 0 - "old" tiles (16x16, 1 - new - (18x18) parameter SENSOR12BITS_NEW_BAYER = 0, // 0 - "old" tiles (16x16, 1 - new - (18x18)
\ No newline at end of file
parameter HISTOGRAM_LEFT = 0, //2; // left
parameter HISTOGRAM_TOP = 2, // top
parameter HISTOGRAM_WIDTH = 6, // width
parameter HISTOGRAM_HEIGHT = 6, // height
parameter HISTOGRAM_STRAT_PAGE = 20'h12345,
parameter WOI_WIDTH= 64
\ No newline at end of file
...@@ -182,10 +182,12 @@ module mcntrl393 #( ...@@ -182,10 +182,12 @@ module mcntrl393 #(
parameter MCNTRL_SCANLINE_MODE= 'h0, // set mode register: {extra_pages[1:0],enable,!reset} parameter MCNTRL_SCANLINE_MODE= 'h0, // set mode register: {extra_pages[1:0],enable,!reset}
parameter MCNTRL_SCANLINE_STATUS_CNTRL= 'h1, // control status reporting parameter MCNTRL_SCANLINE_STATUS_CNTRL= 'h1, // control status reporting
parameter MCNTRL_SCANLINE_STARTADDR= 'h2, // 22-bit frame start address (3 CA LSBs==0. BA==0) parameter MCNTRL_SCANLINE_STARTADDR= 'h2, // 22-bit frame start address (3 CA LSBs==0. BA==0)
parameter MCNTRL_SCANLINE_FRAME_FULL_WIDTH= 'h3, // Padded line length (8-row increment), in 8-bursts (16 bytes) parameter MCNTRL_SCANLINE_FRAME_SIZE= 'h3, // 22-bit frame start address increment (3 CA LSBs==0. BA==0)
parameter MCNTRL_SCANLINE_WINDOW_WH= 'h4, // low word - 13-bit window width (0->'h4000), high word - 16-bit frame height (0->'h10000) parameter MCNTRL_SCANLINE_FRAME_LAST= 'h4, // 16-bit last frame number in the buffer
parameter MCNTRL_SCANLINE_WINDOW_X0Y0= 'h5, // low word - 13-bit window left, high word - 16-bit window top parameter MCNTRL_SCANLINE_FRAME_FULL_WIDTH= 'h5, // Padded line length (8-row increment), in 8-bursts (16 bytes)
parameter MCNTRL_SCANLINE_WINDOW_STARTXY= 'h6, // low word - 13-bit start X (relative to window), high word - 16-bit start y parameter MCNTRL_SCANLINE_WINDOW_WH= 'h6, // low word - 13-bit window width (0->'h4000), high word - 16-bit frame height (0->'h10000)
parameter MCNTRL_SCANLINE_WINDOW_X0Y0= 'h7, // low word - 13-bit window left, high word - 16-bit window top
parameter MCNTRL_SCANLINE_WINDOW_STARTXY= 'h8, // low word - 13-bit start X (relative to window), high word - 16-bit start y
// Start XY can be used when read command to start from the middle // Start XY can be used when read command to start from the middle
// TODO: Add number of blocks to R/W? (blocks can be different) - total length? // TODO: Add number of blocks to R/W? (blocks can be different) - total length?
// Read back current address (for debugging)? // Read back current address (for debugging)?
...@@ -207,14 +209,17 @@ module mcntrl393 #( ...@@ -207,14 +209,17 @@ module mcntrl393 #(
parameter MCNTRL_TILED_MODE= 'h0, // set mode register: {extra_pages[1:0],write_mode,enable,!reset} parameter MCNTRL_TILED_MODE= 'h0, // set mode register: {extra_pages[1:0],write_mode,enable,!reset}
parameter MCNTRL_TILED_STATUS_CNTRL= 'h1, // control status reporting parameter MCNTRL_TILED_STATUS_CNTRL= 'h1, // control status reporting
parameter MCNTRL_TILED_STARTADDR= 'h2, // 22-bit frame start address (3 CA LSBs==0. BA==0) parameter MCNTRL_TILED_STARTADDR= 'h2, // 22-bit frame start address (3 CA LSBs==0. BA==0)
parameter MCNTRL_TILED_FRAME_FULL_WIDTH='h3, // Padded line length (8-row increment), in 8-bursts (16 bytes) parameter MCNTRL_TILED_FRAME_SIZE= 'h3, // 22-bit frame start address increment (3 CA LSBs==0. BA==0)
parameter MCNTRL_TILED_WINDOW_WH= 'h4, // low word - 13-bit window width (0->'h4000), high word - 16-bit frame height (0->'h10000) parameter MCNTRL_TILED_FRAME_LAST= 'h4, // 16-bit last frame number in the buffer
parameter MCNTRL_TILED_WINDOW_X0Y0= 'h5, // low word - 13-bit window left, high word - 16-bit window top parameter MCNTRL_TILED_FRAME_FULL_WIDTH='h5, // Padded line length (8-row increment), in 8-bursts (16 bytes)
parameter MCNTRL_TILED_WINDOW_STARTXY= 'h6, // low word - 13-bit start X (relative to window), high word - 16-bit start y parameter MCNTRL_TILED_WINDOW_WH= 'h6, // low word - 13-bit window width (0->'h4000), high word - 16-bit frame height (0->'h10000)
parameter MCNTRL_TILED_WINDOW_X0Y0= 'h7, // low word - 13-bit window left, high word - 16-bit window top
parameter MCNTRL_TILED_WINDOW_STARTXY= 'h8, // low word - 13-bit start X (relative to window), high word - 16-bit start y
// Start XY can be used when read command to start from the middle // Start XY can be used when read command to start from the middle
// TODO: Add number of blocks to R/W? (blocks can be different) - total length? // TODO: Add number of blocks to R/W? (blocks can be different) - total length?
// Read back current address (for debugging)? // Read back current address (for debugging)?
parameter MCNTRL_TILED_TILE_WHS= 'h7, // low word - 6-bit tile width in 8-bursts, high - tile height (0 - > 64) parameter MCNTRL_TILED_TILE_WHS= 'h9, // low byte - 6-bit tile width in 8-bursts, second byte - tile height (0 - > 64),
// 3-rd byte - vertical step (to control tile vertical overlap)
parameter MCNTRL_TILED_STATUS_REG_CHN2_ADDR= 'h5, parameter MCNTRL_TILED_STATUS_REG_CHN2_ADDR= 'h5,
parameter MCNTRL_TILED_STATUS_REG_CHN4_ADDR= 'h7, parameter MCNTRL_TILED_STATUS_REG_CHN4_ADDR= 'h7,
parameter MCNTRL_TILED_PENDING_CNTR_BITS=2, // Number of bits to count pending trasfers, currently 2 is enough, but may increase parameter MCNTRL_TILED_PENDING_CNTR_BITS=2, // Number of bits to count pending trasfers, currently 2 is enough, but may increase
...@@ -1036,6 +1041,8 @@ module mcntrl393 #( ...@@ -1036,6 +1041,8 @@ module mcntrl393 #(
.MCNTRL_SCANLINE_MODE (MCNTRL_SCANLINE_MODE), .MCNTRL_SCANLINE_MODE (MCNTRL_SCANLINE_MODE),
.MCNTRL_SCANLINE_STATUS_CNTRL (MCNTRL_SCANLINE_STATUS_CNTRL), .MCNTRL_SCANLINE_STATUS_CNTRL (MCNTRL_SCANLINE_STATUS_CNTRL),
.MCNTRL_SCANLINE_STARTADDR (MCNTRL_SCANLINE_STARTADDR), .MCNTRL_SCANLINE_STARTADDR (MCNTRL_SCANLINE_STARTADDR),
.MCNTRL_SCANLINE_FRAME_SIZE (MCNTRL_SCANLINE_FRAME_SIZE),
.MCNTRL_SCANLINE_FRAME_LAST (MCNTRL_SCANLINE_FRAME_LAST),
.MCNTRL_SCANLINE_FRAME_FULL_WIDTH (MCNTRL_SCANLINE_FRAME_FULL_WIDTH), .MCNTRL_SCANLINE_FRAME_FULL_WIDTH (MCNTRL_SCANLINE_FRAME_FULL_WIDTH),
.MCNTRL_SCANLINE_WINDOW_WH (MCNTRL_SCANLINE_WINDOW_WH), .MCNTRL_SCANLINE_WINDOW_WH (MCNTRL_SCANLINE_WINDOW_WH),
.MCNTRL_SCANLINE_WINDOW_X0Y0 (MCNTRL_SCANLINE_WINDOW_X0Y0), .MCNTRL_SCANLINE_WINDOW_X0Y0 (MCNTRL_SCANLINE_WINDOW_X0Y0),
...@@ -1095,6 +1102,8 @@ module mcntrl393 #( ...@@ -1095,6 +1102,8 @@ module mcntrl393 #(
.MCNTRL_TILED_MODE (MCNTRL_TILED_MODE), .MCNTRL_TILED_MODE (MCNTRL_TILED_MODE),
.MCNTRL_TILED_STATUS_CNTRL (MCNTRL_TILED_STATUS_CNTRL), .MCNTRL_TILED_STATUS_CNTRL (MCNTRL_TILED_STATUS_CNTRL),
.MCNTRL_TILED_STARTADDR (MCNTRL_TILED_STARTADDR), .MCNTRL_TILED_STARTADDR (MCNTRL_TILED_STARTADDR),
.MCNTRL_TILED_FRAME_SIZE (MCNTRL_TILED_FRAME_SIZE),
.MCNTRL_TILED_FRAME_LAST (MCNTRL_TILED_FRAME_LAST),
.MCNTRL_TILED_FRAME_FULL_WIDTH (MCNTRL_TILED_FRAME_FULL_WIDTH), .MCNTRL_TILED_FRAME_FULL_WIDTH (MCNTRL_TILED_FRAME_FULL_WIDTH),
.MCNTRL_TILED_WINDOW_WH (MCNTRL_TILED_WINDOW_WH), .MCNTRL_TILED_WINDOW_WH (MCNTRL_TILED_WINDOW_WH),
.MCNTRL_TILED_WINDOW_X0Y0 (MCNTRL_TILED_WINDOW_X0Y0), .MCNTRL_TILED_WINDOW_X0Y0 (MCNTRL_TILED_WINDOW_X0Y0),
...@@ -1167,6 +1176,8 @@ module mcntrl393 #( ...@@ -1167,6 +1176,8 @@ module mcntrl393 #(
.MCNTRL_SCANLINE_MODE (MCNTRL_SCANLINE_MODE), .MCNTRL_SCANLINE_MODE (MCNTRL_SCANLINE_MODE),
.MCNTRL_SCANLINE_STATUS_CNTRL (MCNTRL_SCANLINE_STATUS_CNTRL), .MCNTRL_SCANLINE_STATUS_CNTRL (MCNTRL_SCANLINE_STATUS_CNTRL),
.MCNTRL_SCANLINE_STARTADDR (MCNTRL_SCANLINE_STARTADDR), .MCNTRL_SCANLINE_STARTADDR (MCNTRL_SCANLINE_STARTADDR),
.MCNTRL_SCANLINE_FRAME_SIZE (MCNTRL_SCANLINE_FRAME_SIZE),
.MCNTRL_SCANLINE_FRAME_LAST (MCNTRL_SCANLINE_FRAME_LAST),
.MCNTRL_SCANLINE_FRAME_FULL_WIDTH (MCNTRL_SCANLINE_FRAME_FULL_WIDTH), .MCNTRL_SCANLINE_FRAME_FULL_WIDTH (MCNTRL_SCANLINE_FRAME_FULL_WIDTH),
.MCNTRL_SCANLINE_WINDOW_WH (MCNTRL_SCANLINE_WINDOW_WH), .MCNTRL_SCANLINE_WINDOW_WH (MCNTRL_SCANLINE_WINDOW_WH),
.MCNTRL_SCANLINE_WINDOW_X0Y0 (MCNTRL_SCANLINE_WINDOW_X0Y0), .MCNTRL_SCANLINE_WINDOW_X0Y0 (MCNTRL_SCANLINE_WINDOW_X0Y0),
...@@ -1225,6 +1236,8 @@ module mcntrl393 #( ...@@ -1225,6 +1236,8 @@ module mcntrl393 #(
.MCNTRL_SCANLINE_MODE (MCNTRL_SCANLINE_MODE), .MCNTRL_SCANLINE_MODE (MCNTRL_SCANLINE_MODE),
.MCNTRL_SCANLINE_STATUS_CNTRL (MCNTRL_SCANLINE_STATUS_CNTRL), .MCNTRL_SCANLINE_STATUS_CNTRL (MCNTRL_SCANLINE_STATUS_CNTRL),
.MCNTRL_SCANLINE_STARTADDR (MCNTRL_SCANLINE_STARTADDR), .MCNTRL_SCANLINE_STARTADDR (MCNTRL_SCANLINE_STARTADDR),
.MCNTRL_SCANLINE_FRAME_SIZE (MCNTRL_SCANLINE_FRAME_SIZE),
.MCNTRL_SCANLINE_FRAME_LAST (MCNTRL_SCANLINE_FRAME_LAST),
.MCNTRL_SCANLINE_FRAME_FULL_WIDTH (MCNTRL_SCANLINE_FRAME_FULL_WIDTH), .MCNTRL_SCANLINE_FRAME_FULL_WIDTH (MCNTRL_SCANLINE_FRAME_FULL_WIDTH),
.MCNTRL_SCANLINE_WINDOW_WH (MCNTRL_SCANLINE_WINDOW_WH), .MCNTRL_SCANLINE_WINDOW_WH (MCNTRL_SCANLINE_WINDOW_WH),
.MCNTRL_SCANLINE_WINDOW_X0Y0 (MCNTRL_SCANLINE_WINDOW_X0Y0), .MCNTRL_SCANLINE_WINDOW_X0Y0 (MCNTRL_SCANLINE_WINDOW_X0Y0),
...@@ -1284,6 +1297,8 @@ module mcntrl393 #( ...@@ -1284,6 +1297,8 @@ module mcntrl393 #(
.MCNTRL_TILED_MODE (MCNTRL_TILED_MODE), .MCNTRL_TILED_MODE (MCNTRL_TILED_MODE),
.MCNTRL_TILED_STATUS_CNTRL (MCNTRL_TILED_STATUS_CNTRL), .MCNTRL_TILED_STATUS_CNTRL (MCNTRL_TILED_STATUS_CNTRL),
.MCNTRL_TILED_STARTADDR (MCNTRL_TILED_STARTADDR), .MCNTRL_TILED_STARTADDR (MCNTRL_TILED_STARTADDR),
.MCNTRL_TILED_FRAME_SIZE (MCNTRL_TILED_FRAME_SIZE),
.MCNTRL_TILED_FRAME_LAST (MCNTRL_TILED_FRAME_LAST),
.MCNTRL_TILED_FRAME_FULL_WIDTH (MCNTRL_TILED_FRAME_FULL_WIDTH), .MCNTRL_TILED_FRAME_FULL_WIDTH (MCNTRL_TILED_FRAME_FULL_WIDTH),
.MCNTRL_TILED_WINDOW_WH (MCNTRL_TILED_WINDOW_WH), .MCNTRL_TILED_WINDOW_WH (MCNTRL_TILED_WINDOW_WH),
.MCNTRL_TILED_WINDOW_X0Y0 (MCNTRL_TILED_WINDOW_X0Y0), .MCNTRL_TILED_WINDOW_X0Y0 (MCNTRL_TILED_WINDOW_X0Y0),
...@@ -1349,6 +1364,8 @@ module mcntrl393 #( ...@@ -1349,6 +1364,8 @@ module mcntrl393 #(
.MCNTRL_TILED_MODE (MCNTRL_TILED_MODE), .MCNTRL_TILED_MODE (MCNTRL_TILED_MODE),
.MCNTRL_TILED_STATUS_CNTRL (MCNTRL_TILED_STATUS_CNTRL), .MCNTRL_TILED_STATUS_CNTRL (MCNTRL_TILED_STATUS_CNTRL),
.MCNTRL_TILED_STARTADDR (MCNTRL_TILED_STARTADDR), .MCNTRL_TILED_STARTADDR (MCNTRL_TILED_STARTADDR),
.MCNTRL_TILED_FRAME_SIZE (MCNTRL_TILED_FRAME_SIZE),
.MCNTRL_TILED_FRAME_LAST (MCNTRL_TILED_FRAME_LAST),
.MCNTRL_TILED_FRAME_FULL_WIDTH (MCNTRL_TILED_FRAME_FULL_WIDTH), .MCNTRL_TILED_FRAME_FULL_WIDTH (MCNTRL_TILED_FRAME_FULL_WIDTH),
.MCNTRL_TILED_WINDOW_WH (MCNTRL_TILED_WINDOW_WH), .MCNTRL_TILED_WINDOW_WH (MCNTRL_TILED_WINDOW_WH),
.MCNTRL_TILED_WINDOW_X0Y0 (MCNTRL_TILED_WINDOW_X0Y0), .MCNTRL_TILED_WINDOW_X0Y0 (MCNTRL_TILED_WINDOW_X0Y0),
......
...@@ -70,9 +70,9 @@ module sensor_channel#( ...@@ -70,9 +70,9 @@ module sensor_channel#(
parameter SENSI2C_CMD_DLY = 8, // [7:0] - duration of quater i2c cycle (if 0, [3:0] control SCL+SDA) parameter SENSI2C_CMD_DLY = 8, // [7:0] - duration of quater i2c cycle (if 0, [3:0] control SCL+SDA)
parameter SENSI2C_CMD_DLY_PBITS = 8, parameter SENSI2C_CMD_DLY_PBITS = 8,
// direct control of SDA/SCL mutually exclusive with DLY control, disabled by running i2c // direct control of SDA/SCL mutually exclusive with DLY control, disabled by running i2c
parameter SENSI2C_CMD_SCL = 0, // [1:0] : 0: NOP, 1: 1'b0->SCL, 2: 1'b1->SCL, 3: 1'bz -> SCL parameter SENSI2C_CMD_SCL = 16, // [17:16] : 0: NOP, 1: 1'b0->SCL, 2: 1'b1->SCL, 3: 1'bz -> SCL
parameter SENSI2C_CMD_SCL_WIDTH = 2, parameter SENSI2C_CMD_SCL_WIDTH = 2,
parameter SENSI2C_CMD_SDA = 2, // [3:2] : 0: NOP, 1: 1'b0->SDA, 2: 1'b1->SDA, 3: 1'bz -> SDA, parameter SENSI2C_CMD_SDA = 18, // [19:18] : 0: NOP, 1: 1'b0->SDA, 2: 1'b1->SDA, 3: 1'bz -> SDA,
parameter SENSI2C_CMD_SDA_WIDTH = 2, parameter SENSI2C_CMD_SDA_WIDTH = 2,
parameter SENSI2C_STATUS = 'h1, parameter SENSI2C_STATUS = 'h1,
......
...@@ -37,10 +37,10 @@ module sensor_i2c#( ...@@ -37,10 +37,10 @@ module sensor_i2c#(
parameter SENSI2C_CMD_BYTES_PBITS = 2, parameter SENSI2C_CMD_BYTES_PBITS = 2,
parameter SENSI2C_CMD_DLY = 8, // [7:0] - duration of quater i2c cycle (if 0, [3:0] control SCL+SDA) parameter SENSI2C_CMD_DLY = 8, // [7:0] - duration of quater i2c cycle (if 0, [3:0] control SCL+SDA)
parameter SENSI2C_CMD_DLY_PBITS = 8, parameter SENSI2C_CMD_DLY_PBITS = 8,
// direct control of SDA/SCL mutually exclusive with DLY control, disabled by running i2c
parameter SENSI2C_CMD_SCL = 0, // [1:0] : 0: NOP, 1: 1'b0->SCL, 2: 1'b1->SCL, 3: 1'bz -> SCL parameter SENSI2C_CMD_SCL = 16, // [17:16] : 0: NOP, 1: 1'b0->SCL, 2: 1'b1->SCL, 3: 1'bz -> SCL
parameter SENSI2C_CMD_SCL_WIDTH = 2, parameter SENSI2C_CMD_SCL_WIDTH = 2,
parameter SENSI2C_CMD_SDA = 2, // [3:2] : 0: NOP, 1: 1'b0->SDA, 2: 1'b1->SDA, 3: 1'bz -> SDA, parameter SENSI2C_CMD_SDA = 18, // [19:18] : 0: NOP, 1: 1'b0->SDA, 2: 1'b1->SDA, 3: 1'bz -> SDA,
parameter SENSI2C_CMD_SDA_WIDTH = 2 parameter SENSI2C_CMD_SDA_WIDTH = 2
)( )(
input mrst, // @ posedge mclk input mrst, // @ posedge mclk
......
...@@ -38,10 +38,10 @@ module sensor_i2c_io#( ...@@ -38,10 +38,10 @@ module sensor_i2c_io#(
parameter SENSI2C_CMD_DLY = 8, // [7:0] - duration of quater i2c cycle (if 0, [3:0] control SCL+SDA) parameter SENSI2C_CMD_DLY = 8, // [7:0] - duration of quater i2c cycle (if 0, [3:0] control SCL+SDA)
parameter SENSI2C_CMD_DLY_PBITS = 8, parameter SENSI2C_CMD_DLY_PBITS = 8,
// direct control of SDA/SCL mutually exclusive with DLY control, disabled by running i2c // direct control of SDA/SCL mutually exclusive with DLY control, disabled by running i2c
parameter SENSI2C_CMD_SCL = 0, // [1:0] : 0: NOP, 1: 1'b0->SCL, 2: 1'b1->SCL, 3: 1'bz -> SCL parameter SENSI2C_CMD_SCL = 16, // [17:16] : 0: NOP, 1: 1'b0->SCL, 2: 1'b1->SCL, 3: 1'bz -> SCL
parameter SENSI2C_CMD_SCL_WIDTH = 2, parameter SENSI2C_CMD_SCL_WIDTH = 2,
parameter SENSI2C_CMD_SDA = 2, // [3:2] : 0: NOP, 1: 1'b0->SDA, 2: 1'b1->SDA, 3: 1'bz -> SDA, parameter SENSI2C_CMD_SDA = 18, // [19:18] : 0: NOP, 1: 1'b0->SDA, 2: 1'b1->SDA, 3: 1'bz -> SDA,
parameter SENSI2C_CMD_SDA_WIDTH = 2, parameter SENSI2C_CMD_SDA_WIDTH = 2,
// I/O parameters // I/O parameters
parameter integer SENSI2C_DRIVE = 12, parameter integer SENSI2C_DRIVE = 12,
parameter SENSI2C_IBUF_LOW_PWR = "TRUE", parameter SENSI2C_IBUF_LOW_PWR = "TRUE",
......
...@@ -61,10 +61,9 @@ module sensors393 #( ...@@ -61,10 +61,9 @@ module sensors393 #(
parameter SENSI2C_CMD_BYTES_PBITS = 2, parameter SENSI2C_CMD_BYTES_PBITS = 2,
parameter SENSI2C_CMD_DLY = 8, // [7:0] - duration of quater i2c cycle (if 0, [3:0] control SCL+SDA) parameter SENSI2C_CMD_DLY = 8, // [7:0] - duration of quater i2c cycle (if 0, [3:0] control SCL+SDA)
parameter SENSI2C_CMD_DLY_PBITS = 8, parameter SENSI2C_CMD_DLY_PBITS = 8,
// direct control of SDA/SCL mutually exclusive with DLY control, disabled by running i2c parameter SENSI2C_CMD_SCL = 16, // [17:16] : 0: NOP, 1: 1'b0->SCL, 2: 1'b1->SCL, 3: 1'bz -> SCL
parameter SENSI2C_CMD_SCL = 0, // [1:0] : 0: NOP, 1: 1'b0->SCL, 2: 1'b1->SCL, 3: 1'bz -> SCL
parameter SENSI2C_CMD_SCL_WIDTH = 2, parameter SENSI2C_CMD_SCL_WIDTH = 2,
parameter SENSI2C_CMD_SDA = 2, // [3:2] : 0: NOP, 1: 1'b0->SDA, 2: 1'b1->SDA, 3: 1'bz -> SDA parameter SENSI2C_CMD_SDA = 18, // [19:18] : 0: NOP, 1: 1'b0->SDA, 2: 1'b1->SDA, 3: 1'bz -> SDA,
parameter SENSI2C_CMD_SDA_WIDTH = 2, parameter SENSI2C_CMD_SDA_WIDTH = 2,
parameter SENSI2C_STATUS = 'h1, parameter SENSI2C_STATUS = 'h1,
......
...@@ -32,9 +32,9 @@ module simul_axi_hp_wr#( ...@@ -32,9 +32,9 @@ module simul_axi_hp_wr#(
input awvalid, input awvalid,
output awready, output awready,
input [ 5:0] awid, input [ 5:0] awid,
input [ 1:0] awlock, // verify the corerct values are here input [ 1:0] awlock, // verify the correct values are here
input [ 3:0] awcache, // verify the corerct values are here input [ 3:0] awcache, // verify the correct values are here
input [ 2:0] awprot, // verify the corerct values are here input [ 2:0] awprot, // verify the correct values are here
input [ 3:0] awlen, input [ 3:0] awlen,
input [ 1:0] awsize, input [ 1:0] awsize,
input [ 1:0] awburst, input [ 1:0] awburst,
......
...@@ -42,8 +42,8 @@ module camsync393 #( ...@@ -42,8 +42,8 @@ module camsync393 #(
parameter CAMSYNC_TRIG_DELAY3 = 'h7, // setup input trigger delay parameter CAMSYNC_TRIG_DELAY3 = 'h7, // setup input trigger delay
parameter CAMSYNC_SNDEN_BIT = 'h1, // enable writing ts_snd_en parameter CAMSYNC_SNDEN_BIT = 'h1, // enable writing ts_snd_en
parameter CAMSYNC_EXTERNAL_BIT = 'h3, // enable writing ts_external parameter CAMSYNC_EXTERNAL_BIT = 'h3, // enable writing ts_external (0 - local timestamp in the frame header)
parameter CAMSYNC_TRIGGERED_BIT = 'h5, // enable writing ts_external parameter CAMSYNC_TRIGGERED_BIT = 'h5, // triggered mode ( 0- async)
parameter CAMSYNC_MASTER_BIT = 'h8, // select a 2-bit master channel (master delay may be used as a flash delay) parameter CAMSYNC_MASTER_BIT = 'h8, // select a 2-bit master channel (master delay may be used as a flash delay)
parameter CAMSYNC_CHN_EN_BIT = 'hd, // per-channel enable timestamp generation parameter CAMSYNC_CHN_EN_BIT = 'hd, // per-channel enable timestamp generation
...@@ -63,7 +63,7 @@ module camsync393 #( ...@@ -63,7 +63,7 @@ module camsync393 #(
// [5:4] +'h20 - reset triggered mode (free running sensor), +'h30 - set sensor triggered mode // [5:4] +'h20 - reset triggered mode (free running sensor), +'h30 - set sensor triggered mode
// [8:6] +'h100 - set master channel (zero delay in internal trigger mode, delay used for flash output) // [8:6] +'h100 - set master channel (zero delay in internal trigger mode, delay used for flash output)
// [13:9] +'h2000 - set which channels to generate timestamp mesages // [13:9] +'h2000 - set which channels to generate timestamp mesages
// UPDATE now di-bit "01" means "keep" (00 - do not use, 01 - keep, 10 set active 0, 11 - set active 1)
// 1 - source of trigger (10 bit pairs, LSB - level to trigger, MSB - use this bit). All 0 - internal trigger // 1 - source of trigger (10 bit pairs, LSB - level to trigger, MSB - use this bit). All 0 - internal trigger
// in internal mode output has variable delay from the internal trigger (relative to sensor trigger) // in internal mode output has variable delay from the internal trigger (relative to sensor trigger)
// 2 - 10 bit pairs: MSB - enable selected line, LSB - level to send when trigger active // 2 - 10 bit pairs: MSB - enable selected line, LSB - level to send when trigger active
...@@ -79,7 +79,7 @@ module camsync393 #( ...@@ -79,7 +79,7 @@ module camsync393 #(
input prst, // @ posedge pclk - sync reset input prst, // @ posedge pclk - sync reset
input [9:0] gpio_in, // 10-bit input from GPIO pins -> 10 bit input [9:0] gpio_in, // 10-bit input from GPIO pins -> 10 bit
output [9:0] gpio_out, // 10-bit output to GPIO pins output [9:0] gpio_out, // 10-bit output to GPIO pins
output reg [9:0] gpio_out_en, // 10-bit output enable to GPIO pins output [9:0] gpio_out_en, // 10-bit output enable to GPIO pins
output triggered_mode, // use triggered mode (0 - sensors are free-running) @mclk output triggered_mode, // use triggered mode (0 - sensors are free-running) @mclk
...@@ -197,6 +197,7 @@ module camsync393 #( ...@@ -197,6 +197,7 @@ module camsync393 #(
reg high_zero; // 24 MSBs are zero reg high_zero; // 24 MSBs are zero
reg [9:0] input_use; // 1 - use this bit reg [9:0] input_use; // 1 - use this bit
reg [9:0] input_pattern; // data to be compared for trigger event to take place reg [9:0] input_pattern; // data to be compared for trigger event to take place
reg [9:0] gpio_out_en_r;
reg pre_input_use_intern;// @(posedge mclk) Use internal trigger generator, 0 - use external trigger (also switches delay from input to output) reg pre_input_use_intern;// @(posedge mclk) Use internal trigger generator, 0 - use external trigger (also switches delay from input to output)
reg input_use_intern;// @(posedge clk) reg input_use_intern;// @(posedge clk)
reg [31:0] input_dly_chn0; // delay value for the trigger reg [31:0] input_dly_chn0; // delay value for the trigger
...@@ -285,6 +286,8 @@ module camsync393 #( ...@@ -285,6 +286,8 @@ module camsync393 #(
wire [3:0] frame_sync; wire [3:0] frame_sync;
reg [3:0] ts_snap_triggered; // make a timestamp pulse single @(posedge pclk) reg [3:0] ts_snap_triggered; // make a timestamp pulse single @(posedge pclk)
wire [3:0] ts_snap_triggered_mclk; // make a timestamp pulse single @(posedge pclk) wire [3:0] ts_snap_triggered_mclk; // make a timestamp pulse single @(posedge pclk)
assign gpio_out_en = gpio_out_en_r;
//! in testmode GPIO[9] and GPIO[8] use internal signals instead of the outsync: //! in testmode GPIO[9] and GPIO[8] use internal signals instead of the outsync:
//! bit 11 - same as TRIGGER output to the sensor (signal to the sensor may be disabled externally) //! bit 11 - same as TRIGGER output to the sensor (signal to the sensor may be disabled externally)
//! then that bit will be still from internall trigger to frame valid //! then that bit will be still from internall trigger to frame valid
...@@ -326,11 +329,27 @@ module camsync393 #( ...@@ -326,11 +329,27 @@ module camsync393 #(
assign set_trig_delay2_w = cmd_we && (cmd_a == CAMSYNC_TRIG_DELAY2); assign set_trig_delay2_w = cmd_we && (cmd_a == CAMSYNC_TRIG_DELAY2);
assign set_trig_delay3_w = cmd_we && (cmd_a == CAMSYNC_TRIG_DELAY3); assign set_trig_delay3_w = cmd_we && (cmd_a == CAMSYNC_TRIG_DELAY3);
assign pre_input_use = {cmd_data[19],cmd_data[17],cmd_data[15],cmd_data[13],cmd_data[11],cmd_data[9],cmd_data[7],cmd_data[5],cmd_data[3],cmd_data[1]}; assign pre_input_use = {cmd_data[19],cmd_data[17],cmd_data[15],cmd_data[13],cmd_data[11],
assign pre_input_pattern = {cmd_data[18],cmd_data[16],cmd_data[14],cmd_data[12],cmd_data[10],cmd_data[8],cmd_data[6],cmd_data[4],cmd_data[2],cmd_data[0]}; cmd_data[9],cmd_data[7],cmd_data[5],cmd_data[3],cmd_data[1]};
assign pre_input_pattern = {cmd_data[18],cmd_data[16],cmd_data[14],cmd_data[12],cmd_data[10],
cmd_data[8],cmd_data[6],cmd_data[4],cmd_data[2],cmd_data[0]};
assign triggered_mode = triggered_mode_r; assign triggered_mode = triggered_mode_r;
assign {ts_snap_mclk_chn3, ts_snap_mclk_chn2, ts_snap_mclk_chn1, ts_snap_mclk_chn0 } = triggered_mode? ts_snap_triggered_mclk: frame_sync; assign {ts_snap_mclk_chn3, ts_snap_mclk_chn2, ts_snap_mclk_chn1, ts_snap_mclk_chn0 } = triggered_mode? ts_snap_triggered_mclk: frame_sync;
// keep previous value if 2'b01
// assign input_use_w = pre_input_use | (~pre_input_use & pre_input_pattern & input_use);
wire [9:0] input_mask = pre_input_pattern | ~pre_input_use;
wire [9:0] input_use_w = ((input_use ^ pre_input_use) & input_mask) ^ input_use;
wire [9:0] input_pattern_w = ((input_pattern ^ pre_input_pattern) & input_mask) ^ input_pattern;
wire [9:0] pre_gpio_out_en = {cmd_data[19],cmd_data[17],cmd_data[15],cmd_data[13],cmd_data[11],
cmd_data[9], cmd_data[7], cmd_data[5], cmd_data[3], cmd_data[1]};
wire [9:0] pre_gpio_active = {cmd_data[18],cmd_data[16],cmd_data[14],cmd_data[12],cmd_data[10],
cmd_data[8], cmd_data[6], cmd_data[4], cmd_data[2], cmd_data[0]};
wire [9:0] output_mask = pre_gpio_out_en | ~pre_gpio_active;
wire [9:0] gpio_out_en_w = ((gpio_out_en_r ^ pre_gpio_out_en) & output_mask) ^ gpio_out_en_r;
wire [9:0] gpio_active_w = ((gpio_active ^ pre_gpio_active) & output_mask) ^ gpio_active;
always @(posedge mclk) begin always @(posedge mclk) begin
if (set_mode_reg_w) begin if (set_mode_reg_w) begin
if (cmd_data[CAMSYNC_SNDEN_BIT]) ts_snd_en <= cmd_data[CAMSYNC_SNDEN_BIT - 1]; if (cmd_data[CAMSYNC_SNDEN_BIT]) ts_snd_en <= cmd_data[CAMSYNC_SNDEN_BIT - 1];
...@@ -339,11 +358,11 @@ module camsync393 #( ...@@ -339,11 +358,11 @@ module camsync393 #(
if (cmd_data[CAMSYNC_MASTER_BIT]) master_chn <= cmd_data[CAMSYNC_MASTER_BIT - 1 -: 2]; if (cmd_data[CAMSYNC_MASTER_BIT]) master_chn <= cmd_data[CAMSYNC_MASTER_BIT - 1 -: 2];
if (cmd_data[CAMSYNC_CHN_EN_BIT]) chn_en <= cmd_data[CAMSYNC_CHN_EN_BIT - 1 -: 4]; if (cmd_data[CAMSYNC_CHN_EN_BIT]) chn_en <= cmd_data[CAMSYNC_CHN_EN_BIT - 1 -: 4];
end end
if (mrst) input_use <= 0;
if (set_trig_src_w) begin else if (set_trig_src_w) begin
input_use <= pre_input_use; input_use <= input_use_w;
input_pattern <= pre_input_pattern; input_pattern <= input_pattern_w;
pre_input_use_intern <= (pre_input_use == 0); // use internal source for triggering pre_input_use_intern <= (input_use_w == 0); // use internal source for triggering
end end
if (set_trig_delay0_w) begin if (set_trig_delay0_w) begin
...@@ -363,8 +382,8 @@ module camsync393 #( ...@@ -363,8 +382,8 @@ module camsync393 #(
end end
if (set_trig_dst_w) begin if (set_trig_dst_w) begin
gpio_out_en[9:0] <= {cmd_data[19],cmd_data[17],cmd_data[15],cmd_data[13],cmd_data[11],cmd_data[9],cmd_data[7],cmd_data[5],cmd_data[3],cmd_data[1]}; gpio_out_en_r[9:0] <= gpio_out_en_w;
gpio_active[9:0] <= {cmd_data[18],cmd_data[16],cmd_data[14],cmd_data[12],cmd_data[10],cmd_data[8],cmd_data[6],cmd_data[4],cmd_data[2],cmd_data[0]}; gpio_active[9:0] <= gpio_active_w;
testmode <= cmd_data[24]; testmode <= cmd_data[24];
end end
......
...@@ -31,7 +31,7 @@ module rtc393 #( ...@@ -31,7 +31,7 @@ module rtc393 #(
parameter RTC_MHZ = 25, // RTC input clock in MHz (should be interger number) parameter RTC_MHZ = 25, // RTC input clock in MHz (should be interger number)
parameter RTC_BITC_PREDIV = 5, // number of bits to generate 2 MHz pulses counting refclk parameter RTC_BITC_PREDIV = 5, // number of bits to generate 2 MHz pulses counting refclk
parameter RTC_SET_USEC = 0, // 20-bit number of microseconds parameter RTC_SET_USEC = 0, // 20-bit number of microseconds
parameter RTC_SET_SEC = 1, // 32-bit full number of seconds (und actually update timer) parameter RTC_SET_SEC = 1, // 32-bit full number of seconds (and actually update timer)
parameter RTC_SET_CORR = 2, // write correction 16-bit signed parameter RTC_SET_CORR = 2, // write correction 16-bit signed
parameter RTC_SET_STATUS = 3 // set status mode, and take a time snapshot (wait response and read time) parameter RTC_SET_STATUS = 3 // set status mode, and take a time snapshot (wait response and read time)
......
...@@ -36,8 +36,8 @@ module timing393 #( ...@@ -36,8 +36,8 @@ module timing393 #(
parameter CAMSYNC_TRIG_DELAY2 = 'h6, // setup input trigger delay parameter CAMSYNC_TRIG_DELAY2 = 'h6, // setup input trigger delay
parameter CAMSYNC_TRIG_DELAY3 = 'h7, // setup input trigger delay parameter CAMSYNC_TRIG_DELAY3 = 'h7, // setup input trigger delay
parameter CAMSYNC_SNDEN_BIT = 'h1, // enable writing ts_snd_en parameter CAMSYNC_SNDEN_BIT = 'h1, // enable writing ts_snd_en
parameter CAMSYNC_EXTERNAL_BIT = 'h3, // enable writing ts_external parameter CAMSYNC_EXTERNAL_BIT = 'h3, // enable writing ts_external (0 - local timestamp in the frame header)
parameter CAMSYNC_TRIGGERED_BIT = 'h5, // enable writing ts_external parameter CAMSYNC_TRIGGERED_BIT = 'h5, // triggered mode ( 0- async)
parameter CAMSYNC_MASTER_BIT = 'h8, // select a 2-bit master channel (master delay may be used as a flash delay) parameter CAMSYNC_MASTER_BIT = 'h8, // select a 2-bit master channel (master delay may be used as a flash delay)
parameter CAMSYNC_CHN_EN_BIT = 'hd, // per-channel enable timestamp generation parameter CAMSYNC_CHN_EN_BIT = 'hd, // per-channel enable timestamp generation
parameter CAMSYNC_PRE_MAGIC = 6'b110100, parameter CAMSYNC_PRE_MAGIC = 6'b110100,
......
...@@ -27,12 +27,6 @@ ...@@ -27,12 +27,6 @@
// It also reduces real-time requirements to the software, as it is possible to // It also reduces real-time requirements to the software, as it is possible to
// program parameters related to the events several frames in the future. // program parameters related to the events several frames in the future.
// //
// Commands related to the particular frames go to one of the 8 FIFO buffers (64 commands deep each),
// each command is 32 bits wide, with 8MSBs being register address, and the remaining 24 bits - data
// to be written.
// That limits data that can be written to the FPGA registers compared to the direct register writes
// (8MSBs are always zero), but all the relevant information can be written with just 24 data bits.
//
// //
// Controller is programmed through 32 locations. Each registers but the control require two writes: // Controller is programmed through 32 locations. Each registers but the control require two writes:
// First write - register address (AXI_WR_ADDR_BITS bits), second - register data (32 bits) // First write - register address (AXI_WR_ADDR_BITS bits), second - register data (32 bits)
...@@ -57,7 +51,6 @@ module cmd_frame_sequencer#( ...@@ -57,7 +51,6 @@ module cmd_frame_sequencer#(
parameter CMDFRAMESEQ_CTRL = 31, parameter CMDFRAMESEQ_CTRL = 31,
parameter CMDFRAMESEQ_RST_BIT = 14, parameter CMDFRAMESEQ_RST_BIT = 14,
parameter CMDFRAMESEQ_RUN_BIT = 13 parameter CMDFRAMESEQ_RUN_BIT = 13
)( )(
input mrst, input mrst,
input mclk, // for command/status input mclk, // for command/status
......
...@@ -916,14 +916,14 @@ assign axi_grst = axi_rst_pre; ...@@ -916,14 +916,14 @@ assign axi_grst = axi_rst_pre;
); );
mcntrl393 #( mcntrl393 #(
.MCONTR_SENS_BASE('h680), .MCONTR_SENS_BASE (MCONTR_SENS_BASE),
.MCONTR_SENS_INC('h10), .MCONTR_SENS_INC (MCONTR_SENS_INC),
.MCONTR_CMPRS_BASE('h6c0), .MCONTR_CMPRS_BASE (MCONTR_CMPRS_BASE),
.MCONTR_CMPRS_INC('h10), .MCONTR_CMPRS_INC (MCONTR_CMPRS_INC),
.MCONTR_SENS_STATUS_BASE('h28), .MCONTR_SENS_STATUS_BASE (MCONTR_SENS_STATUS_BASE),
.MCONTR_SENS_STATUS_INC('h1), .MCONTR_SENS_STATUS_INC (MCONTR_SENS_STATUS_INC),
.MCONTR_CMPRS_STATUS_BASE('h2c), .MCONTR_CMPRS_STATUS_BASE (MCONTR_CMPRS_STATUS_BASE),
.MCONTR_CMPRS_STATUS_INC('h1), .MCONTR_CMPRS_STATUS_INC (MCONTR_CMPRS_STATUS_INC),
.MCONTR_WR_MASK (MCONTR_WR_MASK), .MCONTR_WR_MASK (MCONTR_WR_MASK),
.MCONTR_RD_MASK (MCONTR_RD_MASK), .MCONTR_RD_MASK (MCONTR_RD_MASK),
...@@ -1025,6 +1025,8 @@ assign axi_grst = axi_rst_pre; ...@@ -1025,6 +1025,8 @@ assign axi_grst = axi_rst_pre;
.MCNTRL_SCANLINE_MODE (MCNTRL_SCANLINE_MODE), .MCNTRL_SCANLINE_MODE (MCNTRL_SCANLINE_MODE),
.MCNTRL_SCANLINE_STATUS_CNTRL (MCNTRL_SCANLINE_STATUS_CNTRL), .MCNTRL_SCANLINE_STATUS_CNTRL (MCNTRL_SCANLINE_STATUS_CNTRL),
.MCNTRL_SCANLINE_STARTADDR (MCNTRL_SCANLINE_STARTADDR), .MCNTRL_SCANLINE_STARTADDR (MCNTRL_SCANLINE_STARTADDR),
.MCNTRL_SCANLINE_FRAME_SIZE (MCNTRL_SCANLINE_FRAME_SIZE),
.MCNTRL_SCANLINE_FRAME_LAST (MCNTRL_SCANLINE_FRAME_LAST),
.MCNTRL_SCANLINE_FRAME_FULL_WIDTH (MCNTRL_SCANLINE_FRAME_FULL_WIDTH), .MCNTRL_SCANLINE_FRAME_FULL_WIDTH (MCNTRL_SCANLINE_FRAME_FULL_WIDTH),
.MCNTRL_SCANLINE_WINDOW_WH (MCNTRL_SCANLINE_WINDOW_WH), .MCNTRL_SCANLINE_WINDOW_WH (MCNTRL_SCANLINE_WINDOW_WH),
.MCNTRL_SCANLINE_WINDOW_X0Y0 (MCNTRL_SCANLINE_WINDOW_X0Y0), .MCNTRL_SCANLINE_WINDOW_X0Y0 (MCNTRL_SCANLINE_WINDOW_X0Y0),
...@@ -1041,6 +1043,8 @@ assign axi_grst = axi_rst_pre; ...@@ -1041,6 +1043,8 @@ assign axi_grst = axi_rst_pre;
.MCNTRL_TILED_MODE (MCNTRL_TILED_MODE), .MCNTRL_TILED_MODE (MCNTRL_TILED_MODE),
.MCNTRL_TILED_STATUS_CNTRL (MCNTRL_TILED_STATUS_CNTRL), .MCNTRL_TILED_STATUS_CNTRL (MCNTRL_TILED_STATUS_CNTRL),
.MCNTRL_TILED_STARTADDR (MCNTRL_TILED_STARTADDR), .MCNTRL_TILED_STARTADDR (MCNTRL_TILED_STARTADDR),
.MCNTRL_TILED_FRAME_SIZE (MCNTRL_TILED_FRAME_SIZE),
.MCNTRL_TILED_FRAME_LAST (MCNTRL_TILED_FRAME_LAST),
.MCNTRL_TILED_FRAME_FULL_WIDTH (MCNTRL_TILED_FRAME_FULL_WIDTH), .MCNTRL_TILED_FRAME_FULL_WIDTH (MCNTRL_TILED_FRAME_FULL_WIDTH),
.MCNTRL_TILED_WINDOW_WH (MCNTRL_TILED_WINDOW_WH), .MCNTRL_TILED_WINDOW_WH (MCNTRL_TILED_WINDOW_WH),
.MCNTRL_TILED_WINDOW_X0Y0 (MCNTRL_TILED_WINDOW_X0Y0), .MCNTRL_TILED_WINDOW_X0Y0 (MCNTRL_TILED_WINDOW_X0Y0),
......
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment