commands and status for LWIR/VOSPI, exported to C

 * contains all the components and scripts required to completely simulate it

 * with at least one of the Free Software programs.

 */

    // All paremeters should be defined for all defines values - needed to export to C

    parameter MCONTR_WR_MASK =          'h3c00, // AXI write address mask for the 1Kx32 buffers command sequence memory

    parameter MCONTR_RD_MASK =          'h3c00, // AXI read address mask to generate busy

    parameter SENSI2C_IBUF_LOW_PWR=      "TRUE",

    parameter SENSI2C_SLEW =             "SLOW",

//`ifndef HISPI

//`ifdef HISPI

//`elsif LWIR

    parameter VOSPI_EN =                 0,

    parameter VOSPI_EN_BITS =            2,

    parameter VOSPI_SEGM0_OK =           2,

    parameter VOSPI_SEGM0_OK_BITS =      2,

    parameter VOSPI_OUT_EN =             4,

    parameter VOSPI_OUT_EN_BITS =        2,

    parameter VOSPI_OUT_EN_SINGL =       6,

    parameter VOSPI_RESET_CRC =          7,

    parameter VOSPI_MRST =               8,

    parameter VOSPI_MRST_BITS =          2,

    parameter VOSPI_PWDN =              10,

    parameter VOSPI_PWDN_BITS =          2,

    parameter VOSPI_MCLK =              12,

    parameter VOSPI_MCLK_BITS =          2,

    parameter VOSPI_SPI_CLK =           14,

    parameter VOSPI_SPI_CLK_BITS =       2,

    parameter VOSPI_GPIO =              16,

    parameter VOSPI_GPIO_BITS =          8,

    parameter VOSPI_FAKE_OUT =          24, // to keep hardware

    parameter VOSPI_MOSI =              25, // not used

    parameter VOSPI_PACKET_WORDS =      80,

    parameter VOSPI_NO_INVALID =         1, // do not output invalid packets data

    parameter VOSPI_PACKETS_PER_LINE =   2,

    parameter VOSPI_SEGMENT_FIRST =      1,

    parameter VOSPI_SEGMENT_LAST =       4,

    parameter VOSPI_PACKET_FIRST =       0,

    parameter VOSPI_PACKET_LAST =       60,

    parameter VOSPI_PACKET_TTT =        20,  // line number where segment number is provided

    parameter VOSPI_SOF_TO_HACT =        2,  // clock cycles from SOF to HACT

    parameter VOSPI_HACT_TO_HACT_EOF =   2,  // minimal clock cycles from HACT to HACT or to EOF

//`else

    //sensor_fifo parameters

    parameter SENSOR_DATA_WIDTH =      12,

    parameter SENSOR_FIFO_2DEPTH =     4,

        parameter MULTICLK_DIV_XCLK2X =    6, // 200 MHz for compressor (when MULTICLK_DIV_XCLK uses 100 MHz)

`else

        parameter MULTICLK_DIV_XCLK =      5, // 240 MHz for compressor (12 for 100 MHz)

        parameter MULTICLK_DIV_XCLK2X =    6, // unused value

`endif

    parameter MULTICLK_DIV_SYNC =         12, // 100 MHz for inter-camera synchronization and time keeping

// Additional parameters for multi-clock PLL (phases and buffer types)