Commit 636a8f86 authored by Andrey Filippov's avatar Andrey Filippov

added ioremap and a static pointer for the use of writel() and readl()

parent effa97e5
This source diff could not be displayed because it is too large. You can view the blob instead.
...@@ -9,9 +9,9 @@ ...@@ -9,9 +9,9 @@
typedef union { typedef union {
struct { struct {
u32 :24;
u32 mode: 2; // [ 7: 6] (3) Status report mode: 0 - disable, 1 - single, 2 - auto, keep sequence number, 3 - auto, inc. seq. number
u32 seq_num: 6; // [ 5: 0] (0) 6-bit sequence number to be used with the next status response u32 seq_num: 6; // [ 5: 0] (0) 6-bit sequence number to be used with the next status response
u32 mode: 2; // [ 7: 6] (3) Status report mode: 0 - disable, 1 - single, 2 - auto, keep sequence number, 3 - auto, inc. seq. number
u32 :24;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -22,19 +22,19 @@ typedef union { ...@@ -22,19 +22,19 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :19;
u32 skip_too_late: 1; // [ 12] (0) Skip over missed blocks to preserve frame structure (increment pointers)
u32 disable_need: 1; // [ 11] (0) disable 'need' generation, only 'want' (compressor channels)
u32 repetitive: 1; // [ 10] (1) run repetitive frames
u32 single: 1; // [ 9] (0) run single frame
u32 reset_frame: 1; // [ 8] (0) reset frame number
u32 : 1;
u32 byte32: 1; // [ 6] (1) 32-byte columns (0 - 16-byte), not used in scanline mode
u32 keep_open: 1; // [ 5] (0) for 8 or less rows - do not close page between accesses (not used in scanline mode)
u32 extra_pages: 2; // [ 4: 3] (0) 2-bit number of extra pages that need to stay (not to be overwritten) in the buffer
u32 write_mem: 1; // [ 2] (0) 0 - read from memory, 1 - write to memory
u32 chn_nreset: 1; // [ 1] (1) 0: immediately reset all the internal circuitry
u32 enable: 1; // [ 0] (1) enable requests from this channel ( 0 will let current to finish, but not raise want/need) u32 enable: 1; // [ 0] (1) enable requests from this channel ( 0 will let current to finish, but not raise want/need)
u32 chn_nreset: 1; // [ 1] (1) 0: immediately reset all the internal circuitry
u32 write_mem: 1; // [ 2] (0) 0 - read from memory, 1 - write to memory
u32 extra_pages: 2; // [ 4: 3] (0) 2-bit number of extra pages that need to stay (not to be overwritten) in the buffer
u32 keep_open: 1; // [ 5] (0) for 8 or less rows - do not close page between accesses (not used in scanline mode)
u32 byte32: 1; // [ 6] (1) 32-byte columns (0 - 16-byte), not used in scanline mode
u32 : 1;
u32 reset_frame: 1; // [ 8] (0) reset frame number
u32 single: 1; // [ 9] (0) run single frame
u32 repetitive: 1; // [ 10] (1) run repetitive frames
u32 disable_need: 1; // [ 11] (0) disable 'need' generation, only 'want' (compressor channels)
u32 skip_too_late: 1; // [ 12] (0) Skip over missed blocks to preserve frame structure (increment pointers)
u32 :19;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -45,12 +45,12 @@ typedef union { ...@@ -45,12 +45,12 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 : 8; u32 tile_width: 6; // [ 5: 0] (2) tile width in 8-bursts (16 bytes)
u32 vert_step: 8; // [23:16] (0x10) Tile vertical step to control tile overlap
u32 : 2; u32 : 2;
u32 tile_height: 6; // [13: 8] (0x12) tile height in lines (0 means 64 lines) u32 tile_height: 6; // [13: 8] (0x12) tile height in lines (0 means 64 lines)
u32 : 2; u32 : 2;
u32 tile_width: 6; // [ 5: 0] (2) tile width in 8-bursts (16 bytes) u32 vert_step: 8; // [23:16] (0x10) Tile vertical step to control tile overlap
u32 : 8;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -61,9 +61,9 @@ typedef union { ...@@ -61,9 +61,9 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 height:16; // [31:16] (0) 16-bit window height in scan lines
u32 : 3;
u32 width:13; // [12: 0] (0) 13-bit window width - in 8*16=128 bit bursts u32 width:13; // [12: 0] (0) 13-bit window width - in 8*16=128 bit bursts
u32 : 3;
u32 height:16; // [31:16] (0) 16-bit window height in scan lines
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -74,9 +74,9 @@ typedef union { ...@@ -74,9 +74,9 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 top:16; // [31:16] (0) 16-bit window top margin in scan lines
u32 : 3;
u32 left:13; // [12: 0] (0) 13-bit window left margin in 8-bursts (16 bytes) u32 left:13; // [12: 0] (0) 13-bit window left margin in 8-bursts (16 bytes)
u32 : 3;
u32 top:16; // [31:16] (0) 16-bit window top margin in scan lines
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -87,9 +87,9 @@ typedef union { ...@@ -87,9 +87,9 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 start_y:16; // [31:16] (0) 16-bit window start Y relative to window top margin (debug feature, set = 0)
u32 : 3;
u32 start_x:13; // [12: 0] (0) 13-bit window start X relative to window left margin (debug feature, set = 0) u32 start_x:13; // [12: 0] (0) 13-bit window start X relative to window left margin (debug feature, set = 0)
u32 : 3;
u32 start_y:16; // [31:16] (0) 16-bit window start Y relative to window top margin (debug feature, set = 0)
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -100,8 +100,8 @@ typedef union { ...@@ -100,8 +100,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :19;
u32 full_width:13; // [12: 0] (0) 13-bit Padded line length (8-row increment), in 8-bursts (16 bytes) u32 full_width:13; // [12: 0] (0) 13-bit Padded line length (8-row increment), in 8-bursts (16 bytes)
u32 :19;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -112,8 +112,8 @@ typedef union { ...@@ -112,8 +112,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :16;
u32 last_frame_num:16; // [15: 0] (0) 16-bit number of the last frame in a buffer (1 for a 2-frame ping-pong one) u32 last_frame_num:16; // [15: 0] (0) 16-bit number of the last frame in a buffer (1 for a 2-frame ping-pong one)
u32 :16;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -124,8 +124,8 @@ typedef union { ...@@ -124,8 +124,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :10;
u32 frame_sa_inc:22; // [21: 0] (0) 22-bit frame start address increment (3 CA LSBs==0. BA==0) u32 frame_sa_inc:22; // [21: 0] (0) 22-bit frame start address increment (3 CA LSBs==0. BA==0)
u32 :10;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -136,8 +136,8 @@ typedef union { ...@@ -136,8 +136,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :10;
u32 frame_sa:22; // [21: 0] (0) 22-bit frame start address (3 CA LSBs==0. BA==0) u32 frame_sa:22; // [21: 0] (0) 22-bit frame start address (3 CA LSBs==0. BA==0)
u32 :10;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -148,9 +148,9 @@ typedef union { ...@@ -148,9 +148,9 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :30;
u32 en: 1; // [ 1] (1) Enable PS_PIO channel. Only influences request for arbitration, started transactions will finish if disabled
u32 nrst: 1; // [ 0] (1) Active-low reset for programmed DDR3 memory sequences u32 nrst: 1; // [ 0] (1) Active-low reset for programmed DDR3 memory sequences
u32 en: 1; // [ 1] (1) Enable PS_PIO channel. Only influences request for arbitration, started transactions will finish if disabled
u32 :30;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -161,12 +161,12 @@ typedef union { ...@@ -161,12 +161,12 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :17;
u32 wait_complete: 1; // [ 14] (0) Do not request a new transaction from the scheduler until previous memory transaction is finished
u32 chn: 1; // [ 13] (0) channel buffer to use: 0 - memory read, 1 - memory write
u32 urgent: 1; // [ 12] (0) high priority request (only for competition with other channels, will not pass in this FIFO)
u32 page: 2; // [11:10] (0) Buffer page number
u32 seq_addr:10; // [ 9: 0] (0) Sequence start address u32 seq_addr:10; // [ 9: 0] (0) Sequence start address
u32 page: 2; // [11:10] (0) Buffer page number
u32 urgent: 1; // [ 12] (0) high priority request (only for competition with other channels, will not pass in this FIFO)
u32 chn: 1; // [ 13] (0) channel buffer to use: 0 - memory read, 1 - memory write
u32 wait_complete: 1; // [ 14] (0) Do not request a new transaction from the scheduler until previous memory transaction is finished
u32 :17;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -177,9 +177,9 @@ typedef union { ...@@ -177,9 +177,9 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 seq_num: 6; // [31:26] (0) Sequence number
u32 status2: 2; // [25:24] (0) 2-bit status payload (2 LSB in Verilog)
u32 status24:24; // [23: 0] (0) 24-bit status payload ([25:2] in Verilog u32 status24:24; // [23: 0] (0) 24-bit status payload ([25:2] in Verilog
u32 status2: 2; // [25:24] (0) 2-bit status payload (2 LSB in Verilog)
u32 seq_num: 6; // [31:26] (0) Sequence number
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -190,16 +190,16 @@ typedef union { ...@@ -190,16 +190,16 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 seq_num: 6; // [31:26] (0) Sequence number
u32 locked: 1; // [ 25] (0) Both PLL and MMCM are locked
u32 ps_rdy: 1; // [ 24] (0) Phase change is done
u32 :11;
u32 dly_ready: 1; // [ 12] (0) I/O delays calibration is ready
u32 dci_ready: 1; // [ 11] (0) DCI calibration is ready
u32 locked_mmcm: 1; // [ 10] (0) MMCM is locked
u32 locked_pll: 1; // [ 9] (0) PLL is locked
u32 run_busy: 1; // [ 8] (0) Controller sequence in progress
u32 ps_out: 8; // [ 7: 0] (0) Current MMCM phase shift u32 ps_out: 8; // [ 7: 0] (0) Current MMCM phase shift
u32 run_busy: 1; // [ 8] (0) Controller sequence in progress
u32 locked_pll: 1; // [ 9] (0) PLL is locked
u32 locked_mmcm: 1; // [ 10] (0) MMCM is locked
u32 dci_ready: 1; // [ 11] (0) DCI calibration is ready
u32 dly_ready: 1; // [ 12] (0) I/O delays calibration is ready
u32 :11;
u32 ps_rdy: 1; // [ 24] (0) Phase change is done
u32 locked: 1; // [ 25] (0) Both PLL and MMCM are locked
u32 seq_num: 6; // [31:26] (0) Sequence number
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -210,11 +210,11 @@ typedef union { ...@@ -210,11 +210,11 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 seq_num: 6; // [31:26] (0) Sequence number
u32 need_some: 1; // [ 25] (0) At least one channel requests urgent memory access (high priority)
u32 want_some: 1; // [ 24] (0) At least one channel requests memory access (normal priority)
u32 : 8;
u32 chn_want:16; // [15: 0] (0) Bit mask of the channels that request memory access u32 chn_want:16; // [15: 0] (0) Bit mask of the channels that request memory access
u32 : 8;
u32 want_some: 1; // [ 24] (0) At least one channel requests memory access (normal priority)
u32 need_some: 1; // [ 25] (0) At least one channel requests urgent memory access (high priority)
u32 seq_num: 6; // [31:26] (0) Sequence number
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -225,10 +225,10 @@ typedef union { ...@@ -225,10 +225,10 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 seq_num: 6; // [31:26] (0) Sequence number
u32 cmd_nempty_busy: 1; // [ 25] (0) MCNTRL software access pending commands FIFO is not empty or command is running
u32 cmd_half_full: 1; // [ 24] (0) MCNTRL software access pending commands FIFO is half full
u32 :24; u32 :24;
u32 cmd_half_full: 1; // [ 24] (0) MCNTRL software access pending commands FIFO is half full
u32 cmd_nempty_busy: 1; // [ 25] (0) MCNTRL software access pending commands FIFO is not empty or command is running
u32 seq_num: 6; // [31:26] (0) Sequence number
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -239,10 +239,10 @@ typedef union { ...@@ -239,10 +239,10 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 seq_num: 6; // [31:26] (0) Sequence number
u32 frame_finished: 1; // [ 25] (0) Channel completed all memory accesses
u32 busy: 1; // [ 24] (0) Channel is busy (started and some memory accesses are pending)
u32 :24; u32 :24;
u32 busy: 1; // [ 24] (0) Channel is busy (started and some memory accesses are pending)
u32 frame_finished: 1; // [ 25] (0) Channel completed all memory accesses
u32 seq_num: 6; // [31:26] (0) Sequence number
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -253,12 +253,12 @@ typedef union { ...@@ -253,12 +253,12 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 seq_num: 6; // [31:26] (0) Sequence number
u32 frame_finished: 1; // [ 25] (0) Channel completed all memory accesses
u32 frame_busy: 1; // [ 24] (0) Channel is busy (started and some memory accesses are pending)
u32 : 4;
u32 page: 4; // [19:16] (0) Current page number read/written through a channel (low bits)
u32 line_unfinished:16; // [15: 0] (0) Current unfinished frame line u32 line_unfinished:16; // [15: 0] (0) Current unfinished frame line
u32 page: 4; // [19:16] (0) Current page number read/written through a channel (low bits)
u32 : 4;
u32 frame_busy: 1; // [ 24] (0) Channel is busy (started and some memory accesses are pending)
u32 frame_finished: 1; // [ 25] (0) Channel completed all memory accesses
u32 seq_num: 6; // [31:26] (0) Sequence number
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -269,12 +269,12 @@ typedef union { ...@@ -269,12 +269,12 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 seq_num: 6; // [31:26] (0) Sequence number
u32 done: 1; // [ 25] (0) Membridge operation finished
u32 busy: 1; // [ 24] (0) Membridge operation in progress
u32 : 8;
u32 axi_arw_requested: 8; // [15: 8] (0) Number of 64-bit words to be read/written over axi queued to AR/AW channels (low bits)
u32 wresp_conf: 8; // [ 7: 0] (0) Number of 64-bit words confirmed through axi b channel (low bits) u32 wresp_conf: 8; // [ 7: 0] (0) Number of 64-bit words confirmed through axi b channel (low bits)
u32 axi_arw_requested: 8; // [15: 8] (0) Number of 64-bit words to be read/written over axi queued to AR/AW channels (low bits)
u32 : 8;
u32 busy: 1; // [ 24] (0) Membridge operation in progress
u32 done: 1; // [ 25] (0) Membridge operation finished
u32 seq_num: 6; // [31:26] (0) Sequence number
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -285,19 +285,19 @@ typedef union { ...@@ -285,19 +285,19 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 seq_num: 6; // [31:26] (0) Sequence number
u32 xfpgatdo: 1; // [ 25] (0) Multiplexer FPGA TDO output
u32 senspgmin: 1; // [ 24] (0) senspgm pin state
u32 : 8;
u32 vact_alive: 1; // [ 15] (0) VACT signal from the sensor is toggling (N/A for HiSPI)
u32 hact_ext_alive: 1; // [ 14] (0) HACT signal from the sensor is toggling (N/A for HiSPI)
u32 hact_alive: 1; // [ 13] (0) HACT signal from the sensor (or internal) is toggling (N/A for HiSPI
u32 locked_pxd_mmcm: 1; // [ 12] (0) Sensor MMCM locked
u32 clkin_pxd_stopped_mmcm: 1; // [ 11] (0) Sensor MMCM input clock stopped
u32 clkfb_pxd_stopped_mmcm: 1; // [ 10] (0) Sensor MMCM feedback clock stopped
u32 xfpgadone: 1; // [ 9] (0) Multiplexer FPGA DONE output
u32 ps_rdy: 1; // [ 8] (0) Sensor MMCM phase ready
u32 ps_out: 8; // [ 7: 0] (0) Sensor MMCM current phase u32 ps_out: 8; // [ 7: 0] (0) Sensor MMCM current phase
u32 ps_rdy: 1; // [ 8] (0) Sensor MMCM phase ready
u32 xfpgadone: 1; // [ 9] (0) Multiplexer FPGA DONE output
u32 clkfb_pxd_stopped_mmcm: 1; // [ 10] (0) Sensor MMCM feedback clock stopped
u32 clkin_pxd_stopped_mmcm: 1; // [ 11] (0) Sensor MMCM input clock stopped
u32 locked_pxd_mmcm: 1; // [ 12] (0) Sensor MMCM locked
u32 hact_alive: 1; // [ 13] (0) HACT signal from the sensor (or internal) is toggling (N/A for HiSPI
u32 hact_ext_alive: 1; // [ 14] (0) HACT signal from the sensor is toggling (N/A for HiSPI)
u32 vact_alive: 1; // [ 15] (0) VACT signal from the sensor is toggling (N/A for HiSPI)
u32 : 8;
u32 senspgmin: 1; // [ 24] (0) senspgm pin state
u32 xfpgatdo: 1; // [ 25] (0) Multiplexer FPGA TDO output
u32 seq_num: 6; // [31:26] (0) Sequence number
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -308,18 +308,18 @@ typedef union { ...@@ -308,18 +308,18 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 seq_num: 6; // [31:26] (0) Sequence number
u32 sda_in: 1; // [ 25] (0) SDA pin state
u32 scl_in: 1; // [ 24] (0) SCL pin state
u32 : 6;
u32 reset_on: 1; // [ 17] (0) Reset in progress
u32 req_clr: 1; // [ 16] (0) Request for clearing fifo_wp (delay frame sync if previous is not yet sent out)
u32 frame_num: 4; // [15:12] (0) I2C sequencer frame number
u32 alive_fs: 1; // [ 11] (0) Sensor generated frame sync since last status update
u32 busy: 1; // [ 10] (0) I2C sequencer busy
u32 i2c_fifo_cntrl: 1; // [ 9] (0) I2C FIFO byte counter (odd/even bytes)
u32 i2c_fifo_nempty: 1; // [ 8] (0) I2C read FIFO has data
u32 i2c_fifo_dout: 8; // [ 7: 0] (0) I2c byte read from the device through FIFO u32 i2c_fifo_dout: 8; // [ 7: 0] (0) I2c byte read from the device through FIFO
u32 i2c_fifo_nempty: 1; // [ 8] (0) I2C read FIFO has data
u32 i2c_fifo_cntrl: 1; // [ 9] (0) I2C FIFO byte counter (odd/even bytes)
u32 busy: 1; // [ 10] (0) I2C sequencer busy
u32 alive_fs: 1; // [ 11] (0) Sensor generated frame sync since last status update
u32 frame_num: 4; // [15:12] (0) I2C sequencer frame number
u32 req_clr: 1; // [ 16] (0) Request for clearing fifo_wp (delay frame sync if previous is not yet sent out)
u32 reset_on: 1; // [ 17] (0) Reset in progress
u32 : 6;
u32 scl_in: 1; // [ 24] (0) SCL pin state
u32 sda_in: 1; // [ 25] (0) SDA pin state
u32 seq_num: 6; // [31:26] (0) Sequence number
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -330,10 +330,10 @@ typedef union { ...@@ -330,10 +330,10 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :29;
u32 suspend: 1; // [ 2] (0) Suspend command
u32 next_page: 1; // [ 1] (0) Next page command
u32 frame_start: 1; // [ 0] (0) start frame command u32 frame_start: 1; // [ 0] (0) start frame command
u32 next_page: 1; // [ 1] (0) Next page command
u32 suspend: 1; // [ 2] (0) Suspend command
u32 :29;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -344,9 +344,9 @@ typedef union { ...@@ -344,9 +344,9 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :29;
u32 start_reset: 2; // [ 2: 1] (0) 1 - start (from current address), 3 - start from reset address
u32 enable: 1; // [ 0] (0) enable membridge u32 enable: 1; // [ 0] (0) enable membridge
u32 start_reset: 2; // [ 2: 1] (0) 1 - start (from current address), 3 - start from reset address
u32 :29;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -357,9 +357,9 @@ typedef union { ...@@ -357,9 +357,9 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :27;
u32 debug_cache: 1; // [ 4] (0) 0 - normal operation, 1 debug (replace data)
u32 axi_cache: 4; // [ 3: 0] (3) AXI CACHE value (ignored by Zynq) u32 axi_cache: 4; // [ 3: 0] (3) AXI CACHE value (ignored by Zynq)
u32 debug_cache: 1; // [ 4] (0) 0 - normal operation, 1 debug (replace data)
u32 :27;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -370,8 +370,8 @@ typedef union { ...@@ -370,8 +370,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 : 3;
u32 addr64:29; // [28: 0] (0) Address/length in 64-bit words (<<3 to get byte address u32 addr64:29; // [28: 0] (0) Address/length in 64-bit words (<<3 to get byte address
u32 : 3;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -382,41 +382,41 @@ typedef union { ...@@ -382,41 +382,41 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 : 2;
u32 tbl_mode: 2; // [29:28] (3) Should be 3 to select table address write mode
u32 :20;
u32 tbl_addr: 8; // [ 7: 0] (0) Address/length in 64-bit words (<<3 to get byte address u32 tbl_addr: 8; // [ 7: 0] (0) Address/length in 64-bit words (<<3 to get byte address
u32 :20;
u32 tbl_mode: 2; // [29:28] (3) Should be 3 to select table address write mode
u32 : 2;
}; };
struct { struct {
u32 : 2;
u32 /*tbl_mode*/: 2; // [29:28] (2) Should be 2 to select table data write mode
u32 dly: 8; // [27:20] (0) Bit delay - number of mclk periods in 1/4 of the SCL period
u32 nbwr: 4; // [19:16] (0) Number of bytes to write (1..10)
u32 sa: 7; // [15: 9] (0) Slave address in write mode
u32 rnw: 1; // [ 8] (0) Read/not write i2c register, should be 0 here
u32 rah: 8; // [ 7: 0] (0) High byte of the i2c register address u32 rah: 8; // [ 7: 0] (0) High byte of the i2c register address
u32 rnw: 1; // [ 8] (0) Read/not write i2c register, should be 0 here
u32 sa: 7; // [15: 9] (0) Slave address in write mode
u32 nbwr: 4; // [19:16] (0) Number of bytes to write (1..10)
u32 dly: 8; // [27:20] (0) Bit delay - number of mclk periods in 1/4 of the SCL period
u32 /*tbl_mode*/: 2; // [29:28] (2) Should be 2 to select table data write mode
u32 : 2;
}; };
struct { struct {
u32 : 2;
u32 /*tbl_mode*/: 2; // [29:28] (2) Should be 2 to select table data write mode
u32 /*dly*/: 8; // [27:20] (0) Bit delay - number of mclk periods in 1/4 of the SCL period
u32 nabrd: 1; // [ 19] (0) Number of address bytes for read (0 - one byte, 1 - two bytes)
u32 nbrd: 3; // [18:16] (0) Number of bytes to read (1..18, 0 means '8')
u32 : 7;
u32 /*rnw*/: 1; // [ 8] (0) Read/not write i2c register, should be 1 here
u32 /*rah*/: 8; // [ 7: 0] (0) High byte of the i2c register address u32 /*rah*/: 8; // [ 7: 0] (0) High byte of the i2c register address
u32 /*rnw*/: 1; // [ 8] (0) Read/not write i2c register, should be 1 here
u32 : 7;
u32 nbrd: 3; // [18:16] (0) Number of bytes to read (1..18, 0 means '8')
u32 nabrd: 1; // [ 19] (0) Number of address bytes for read (0 - one byte, 1 - two bytes)
u32 /*dly*/: 8; // [27:20] (0) Bit delay - number of mclk periods in 1/4 of the SCL period
u32 /*tbl_mode*/: 2; // [29:28] (2) Should be 2 to select table data write mode
u32 : 2;
}; };
struct { struct {
u32 : 2;
u32 /*tbl_mode*/: 2; // [29:28] (0) Should be 0 to select controls
u32 :13;
u32 reset: 1; // [ 14] (0) Sequencer reset all FIFO (takes 16 clock pulses), also - stops i2c until run command
u32 cmd_run: 2; // [13:12] (0) Sequencer run/stop control: 0,1 - nop, 2 - stop, 3 - run
u32 : 8;
u32 next_fifo_rd: 1; // [ 3] (0) Advance I2C read FIFO pointer
u32 drive_ctl: 1; // [ 2] (0) 0 - nop, 1 - set sda_release and sda_drive_high
u32 sda_release: 1; // [ 1] (0) Release SDA early if next bit ==1 (valid with drive_ctl)
u32 sda_drive_high: 1; // [ 0] (0) Actively drive SDA high during second half of SCL==1 (valid with drive_ctl) u32 sda_drive_high: 1; // [ 0] (0) Actively drive SDA high during second half of SCL==1 (valid with drive_ctl)
u32 sda_release: 1; // [ 1] (0) Release SDA early if next bit ==1 (valid with drive_ctl)
u32 drive_ctl: 1; // [ 2] (0) 0 - nop, 1 - set sda_release and sda_drive_high
u32 next_fifo_rd: 1; // [ 3] (0) Advance I2C read FIFO pointer
u32 : 8;
u32 cmd_run: 2; // [13:12] (0) Sequencer run/stop control: 0,1 - nop, 2 - stop, 3 - run
u32 reset: 1; // [ 14] (0) Sequencer reset all FIFO (takes 16 clock pulses), also - stops i2c until run command
u32 :13;
u32 /*tbl_mode*/: 2; // [29:28] (0) Should be 0 to select controls
u32 : 2;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -427,11 +427,11 @@ typedef union { ...@@ -427,11 +427,11 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :22;
u32 bit16: 1; // [ 9] (0) 0 - 8 bpp mode, 1 - 16 bpp (bypass gamma). Gamma-processed data is still used for histograms
u32 chn_en: 1; // [ 8] (1) Enable this sensor channel
u32 hist_nrst: 4; // [ 7: 4] (0xf) Reset off for histograms subchannels (may be less than 4)
u32 hist_en: 4; // [ 3: 0] (0xf) Enable subchannel histogram modules (may be less than 4) u32 hist_en: 4; // [ 3: 0] (0xf) Enable subchannel histogram modules (may be less than 4)
u32 hist_nrst: 4; // [ 7: 4] (0xf) Reset off for histograms subchannels (may be less than 4)
u32 chn_en: 1; // [ 8] (1) Enable this sensor channel
u32 bit16: 1; // [ 9] (0) 0 - 8 bpp mode, 1 - 16 bpp (bypass gamma). Gamma-processed data is still used for histograms
u32 :22;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -442,8 +442,8 @@ typedef union { ...@@ -442,8 +442,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :16;
u32 mult_frames:16; // [15: 0] (0) Number of frames to combine into one minus 1 (0 - single,1 - two frames...) u32 mult_frames:16; // [15: 0] (0) Number of frames to combine into one minus 1 (0 - single,1 - two frames...)
u32 :16;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -454,8 +454,8 @@ typedef union { ...@@ -454,8 +454,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :16;
u32 mult_frames:16; // [15: 0] (0) Number of lines to delay late frame sync u32 mult_frames:16; // [15: 0] (0) Number of lines to delay late frame sync
u32 :16;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -466,8 +466,8 @@ typedef union { ...@@ -466,8 +466,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :16;
u32 priority:16; // [15: 0] (0) Channel priority (the larger the higher) u32 priority:16; // [15: 0] (0) Channel priority (the larger the higher)
u32 :16;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -478,8 +478,8 @@ typedef union { ...@@ -478,8 +478,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :16;
u32 chn_en:16; // [15: 0] (0) Enabled memory channels u32 chn_en:16; // [15: 0] (0) Enabled memory channels
u32 :16;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -490,9 +490,9 @@ typedef union { ...@@ -490,9 +490,9 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :16;
u32 dqm_patt: 8; // [15: 8] (0) DQM pattern: 0x0
u32 dqs_patt: 8; // [ 7: 0] (0xaa) DQS pattern: 0xaa/0x55 u32 dqs_patt: 8; // [ 7: 0] (0xaa) DQS pattern: 0xaa/0x55
u32 dqm_patt: 8; // [15: 8] (0) DQM pattern: 0x0
u32 :16;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -503,11 +503,11 @@ typedef union { ...@@ -503,11 +503,11 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :16;
u32 dqs_tri_last: 4; // [15:12] (0xc) DQS tristate end (0xe,0xc,0x8); early, nominal, late
u32 dqs_tri_first: 4; // [11: 8] (1) DQS tristate start (0x1,0x3,0x7); early, nominal, late
u32 dq_tri_last: 4; // [ 7: 4] (0xe) DQ tristate end (0xf,0xe,0xc); early, nominal, late
u32 dq_tri_first: 4; // [ 3: 0] (3) DQ tristate start (0x3,0x7,0xf); early, nominal, late u32 dq_tri_first: 4; // [ 3: 0] (3) DQ tristate start (0x3,0x7,0xf); early, nominal, late
u32 dq_tri_last: 4; // [ 7: 4] (0xe) DQ tristate end (0xf,0xe,0xc); early, nominal, late
u32 dqs_tri_first: 4; // [11: 8] (1) DQS tristate start (0x1,0x3,0x7); early, nominal, late
u32 dqs_tri_last: 4; // [15:12] (0xc) DQS tristate end (0xe,0xc,0x8); early, nominal, late
u32 :16;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -518,8 +518,8 @@ typedef union { ...@@ -518,8 +518,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :24;
u32 dly: 8; // [ 7: 0] (0) 8-bit delay value: 5MSBs(0..31) and 3LSBs(0..4) u32 dly: 8; // [ 7: 0] (0) 8-bit delay value: 5MSBs(0..31) and 3LSBs(0..4)
u32 :24;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -530,8 +530,8 @@ typedef union { ...@@ -530,8 +530,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :28;
u32 wbuf_dly: 4; // [ 3: 0] (9) Extra delay in mclk (fDDR/2) cycles) to data write buffer u32 wbuf_dly: 4; // [ 3: 0] (9) Extra delay in mclk (fDDR/2) cycles) to data write buffer
u32 :28;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -542,12 +542,12 @@ typedef union { ...@@ -542,12 +542,12 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :26;
u32 trig: 1; // [ 5] (0) Single trigger used when repetitive mode is off (self clearing bit)
u32 repet: 1; // [ 4] (1) Repetitive (normal) mode. Set 0 for testing of the single-frame mode
u32 en: 1; // [ 3] (1) Enable module
u32 page: 1; // [ 2] (0) Table page (only available if SENS_GAMMA_BUFFER in Verilog)
u32 bayer: 2; // [ 1: 0] (0) Bayer color shift (pixel to gamma table) u32 bayer: 2; // [ 1: 0] (0) Bayer color shift (pixel to gamma table)
u32 page: 1; // [ 2] (0) Table page (only available if SENS_GAMMA_BUFFER in Verilog)
u32 en: 1; // [ 3] (1) Enable module
u32 repet: 1; // [ 4] (1) Repetitive (normal) mode. Set 0 for testing of the single-frame mode
u32 trig: 1; // [ 5] (0) Single trigger used when repetitive mode is off (self clearing bit)
u32 :26;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -558,18 +558,18 @@ typedef union { ...@@ -558,18 +558,18 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :11;
u32 a_n_d: 1; // [ 20] (1) Address/not data, should be set to 1 here
u32 : 8;
u32 sub_chn: 2; // [11:10] (0) Sensor sub-channel (multiplexed to the same port)
u32 color: 2; // [ 9: 8] (0) Color channel
u32 addr: 8; // [ 7: 0] (0) Start address in a gamma page (normally 0) u32 addr: 8; // [ 7: 0] (0) Start address in a gamma page (normally 0)
u32 color: 2; // [ 9: 8] (0) Color channel
u32 sub_chn: 2; // [11:10] (0) Sensor sub-channel (multiplexed to the same port)
u32 : 8;
u32 a_n_d: 1; // [ 20] (1) Address/not data, should be set to 1 here
u32 :11;
}; };
struct { struct {
u32 :14;
u32 diff_scale: 1; // [ 17] (0) Difference scale: 0 - keep diff, 1- multiply diff by 16
char diff: 7; // [16:10] (0) Difference to next (signed, -64..+63)
u32 base:10; // [ 9: 0] (0) Knee point value (to be interpolated between) u32 base:10; // [ 9: 0] (0) Knee point value (to be interpolated between)
char diff: 7; // [16:10] (0) Difference to next (signed, -64..+63)
u32 diff_scale: 1; // [ 17] (0) Difference scale: 0 - keep diff, 1- multiply diff by 16
u32 :14;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -580,8 +580,8 @@ typedef union { ...@@ -580,8 +580,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 height1m1:16; // [31:16] (0) Height of subchannel 1 frame minus 1
u32 height0m1:16; // [15: 0] (0) Height of subchannel 0 frame minus 1 u32 height0m1:16; // [15: 0] (0) Height of subchannel 0 frame minus 1
u32 height1m1:16; // [31:16] (0) Height of subchannel 1 frame minus 1
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -592,8 +592,8 @@ typedef union { ...@@ -592,8 +592,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :16;
u32 height2m1:16; // [15: 0] (0) Height of subchannel 2 frame minus 1 u32 height2m1:16; // [15: 0] (0) Height of subchannel 2 frame minus 1
u32 :16;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -604,41 +604,41 @@ typedef union { ...@@ -604,41 +604,41 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :11;
u32 quadrants_set: 1; // [ 20] (0) Set 'quadrants' values
u32 : 2;
u32 quadrants: 6; // [17:12] (1) 90-degree shifts for data [1:0], hact [3:2] and vact [5:4]
u32 : 1;
u32 set_dly: 1; // [ 10] (0) Set all pre-programmed delays to the sensor port input delays
u32 ext_clk_set: 1; // [ 9] (0) Set MMCM clock input to 'ext_clk' field
u32 ext_clk: 1; // [ 8] (0) MMCM clock input: 0: clock to the sensor, 1 - clock from the sensor
u32 mmcm_rst_set: 1; // [ 7] (0) MMCM reset set to 'mmcm_rst' field
u32 mmcm_rst: 1; // [ 6] (0) MMCM (for sensor clock) reset signal
u32 aro_set: 1; // [ 5] (0) ARO set to the 'aro' field
u32 aro: 1; // [ 4] (0) ARO signal to the sensor
u32 arst_set: 1; // [ 3] (0) ARST set to the 'arst' field
u32 arst: 1; // [ 2] (0) ARST signal to the sensor
u32 mrst_set: 1; // [ 1] (0) when set to 1, MRST is set to the 'mrst' field value
u32 mrst: 1; // [ 0] (0) MRST signal level to the sensor (0 - low(active), 1 - high (inactive) u32 mrst: 1; // [ 0] (0) MRST signal level to the sensor (0 - low(active), 1 - high (inactive)
u32 mrst_set: 1; // [ 1] (0) when set to 1, MRST is set to the 'mrst' field value
u32 arst: 1; // [ 2] (0) ARST signal to the sensor
u32 arst_set: 1; // [ 3] (0) ARST set to the 'arst' field
u32 aro: 1; // [ 4] (0) ARO signal to the sensor
u32 aro_set: 1; // [ 5] (0) ARO set to the 'aro' field
u32 mmcm_rst: 1; // [ 6] (0) MMCM (for sensor clock) reset signal
u32 mmcm_rst_set: 1; // [ 7] (0) MMCM reset set to 'mmcm_rst' field
u32 ext_clk: 1; // [ 8] (0) MMCM clock input: 0: clock to the sensor, 1 - clock from the sensor
u32 ext_clk_set: 1; // [ 9] (0) Set MMCM clock input to 'ext_clk' field
u32 set_dly: 1; // [ 10] (0) Set all pre-programmed delays to the sensor port input delays
u32 : 1;
u32 quadrants: 6; // [17:12] (1) 90-degree shifts for data [1:0], hact [3:2] and vact [5:4]
u32 : 2;
u32 quadrants_set: 1; // [ 20] (0) Set 'quadrants' values
u32 :11;
}; };
struct { struct {
u32 :16;
u32 gp1_set: 1; // [ 15] (0) Set GP1 to 'gp1' value
u32 gp1: 1; // [ 14] (0) GP1 multipurpose signal to the sensor
u32 gp0_set: 1; // [ 13] (0) Set GP0 to 'gp0' value
u32 gp0: 1; // [ 12] (0) GP0 multipurpose signal to the sensor
u32 : 1;
u32 /*set_dly*/: 1; // [ 10] (0) Set all pre-programmed delays to the sensor port input delays
u32 ign_embed_set: 1; // [ 9] (0) Set mode to 'ign_embed' field
u32 ign_embed: 1; // [ 8] (0) Ignore embedded data (non-image pixel lines
u32 /*mmcm_rst_set*/: 1; // [ 7] (0) MMCM reset set to 'mmcm_rst' field
u32 /*mmcm_rst*/: 1; // [ 6] (0) MMCM (for sensor clock) reset signal
u32 /*aro_set*/: 1; // [ 5] (0) ARO set to the 'aro' field
u32 /*aro*/: 1; // [ 4] (0) ARO signal to the sensor
u32 /*arst_set*/: 1; // [ 3] (0) ARST set to the 'arst' field
u32 /*arst*/: 1; // [ 2] (0) ARST signal to the sensor
u32 /*mrst_set*/: 1; // [ 1] (0) when set to 1, MRST is set to the 'mrst' field value
u32 /*mrst*/: 1; // [ 0] (0) MRST signal level to the sensor (0 - low(active), 1 - high (inactive) u32 /*mrst*/: 1; // [ 0] (0) MRST signal level to the sensor (0 - low(active), 1 - high (inactive)
u32 /*mrst_set*/: 1; // [ 1] (0) when set to 1, MRST is set to the 'mrst' field value
u32 /*arst*/: 1; // [ 2] (0) ARST signal to the sensor
u32 /*arst_set*/: 1; // [ 3] (0) ARST set to the 'arst' field
u32 /*aro*/: 1; // [ 4] (0) ARO signal to the sensor
u32 /*aro_set*/: 1; // [ 5] (0) ARO set to the 'aro' field
u32 /*mmcm_rst*/: 1; // [ 6] (0) MMCM (for sensor clock) reset signal
u32 /*mmcm_rst_set*/: 1; // [ 7] (0) MMCM reset set to 'mmcm_rst' field
u32 ign_embed: 1; // [ 8] (0) Ignore embedded data (non-image pixel lines
u32 ign_embed_set: 1; // [ 9] (0) Set mode to 'ign_embed' field
u32 /*set_dly*/: 1; // [ 10] (0) Set all pre-programmed delays to the sensor port input delays
u32 : 1;
u32 gp0: 1; // [ 12] (0) GP0 multipurpose signal to the sensor
u32 gp0_set: 1; // [ 13] (0) Set GP0 to 'gp0' value
u32 gp1: 1; // [ 14] (0) GP1 multipurpose signal to the sensor
u32 gp1_set: 1; // [ 15] (0) Set GP1 to 'gp1' value
u32 :16;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -649,17 +649,17 @@ typedef union { ...@@ -649,17 +649,17 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :22;
u32 pgmen_set: 1; // [ 9] (0) Sensor port PGMEN set to 'pgmen' field
u32 pgmen: 1; // [ 8] (0) Sensor port PGMEN level
u32 prog_set: 1; // [ 7] (0) Sensor port PROG set to 'prog' field
u32 prog: 1; // [ 6] (0) Sensor port PROG level
u32 tck_set: 1; // [ 5] (0) JTAG TCK set to 'tck' field
u32 tck: 1; // [ 4] (0) JTAG TCK level
u32 tms_set: 1; // [ 3] (0) JTAG TMS set to 'tms' field
u32 tms: 1; // [ 2] (0) JTAG TMS level
u32 tdi_set: 1; // [ 1] (0) JTAG TDI set to 'tdi' field
u32 tdi: 1; // [ 0] (0) JTAG TDI level u32 tdi: 1; // [ 0] (0) JTAG TDI level
u32 tdi_set: 1; // [ 1] (0) JTAG TDI set to 'tdi' field
u32 tms: 1; // [ 2] (0) JTAG TMS level
u32 tms_set: 1; // [ 3] (0) JTAG TMS set to 'tms' field
u32 tck: 1; // [ 4] (0) JTAG TCK level
u32 tck_set: 1; // [ 5] (0) JTAG TCK set to 'tck' field
u32 prog: 1; // [ 6] (0) Sensor port PROG level
u32 prog_set: 1; // [ 7] (0) Sensor port PROG set to 'prog' field
u32 pgmen: 1; // [ 8] (0) Sensor port PGMEN level
u32 pgmen_set: 1; // [ 9] (0) Sensor port PGMEN set to 'pgmen' field
u32 :22;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -670,14 +670,14 @@ typedef union { ...@@ -670,14 +670,14 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 pxd3: 8; // [31:24] (0) PXD3 input delay (3 LSB not used)
u32 pxd2: 8; // [23:16] (0) PXD2 input delay (3 LSB not used)
u32 pxd1: 8; // [15: 8] (0) PXD1 input delay (3 LSB not used)
u32 pxd0: 8; // [ 7: 0] (0) PXD0 input delay (3 LSB not used) u32 pxd0: 8; // [ 7: 0] (0) PXD0 input delay (3 LSB not used)
u32 pxd1: 8; // [15: 8] (0) PXD1 input delay (3 LSB not used)
u32 pxd2: 8; // [23:16] (0) PXD2 input delay (3 LSB not used)
u32 pxd3: 8; // [31:24] (0) PXD3 input delay (3 LSB not used)
}; };
struct { struct {
u32 :28;
u32 fifo_lag: 4; // [ 3: 0] (7) FIFO delay to start output u32 fifo_lag: 4; // [ 3: 0] (7) FIFO delay to start output
u32 :28;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -688,17 +688,17 @@ typedef union { ...@@ -688,17 +688,17 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 pxd7: 8; // [31:24] (0) PXD7 input delay (3 LSB not used)
u32 pxd6: 8; // [23:16] (0) PXD6 input delay (3 LSB not used)
u32 pxd5: 8; // [15: 8] (0) PXD5 input delay (3 LSB not used)
u32 pxd4: 8; // [ 7: 0] (0) PXD4 input delay (3 LSB not used) u32 pxd4: 8; // [ 7: 0] (0) PXD4 input delay (3 LSB not used)
u32 pxd5: 8; // [15: 8] (0) PXD5 input delay (3 LSB not used)
u32 pxd6: 8; // [23:16] (0) PXD6 input delay (3 LSB not used)
u32 pxd7: 8; // [31:24] (0) PXD7 input delay (3 LSB not used)
}; };
struct { struct {
u32 :24;
u32 phys_lane3: 2; // [ 7: 6] (0) Physical lane for logical lane 3
u32 phys_lane2: 2; // [ 5: 4] (3) Physical lane for logical lane 2
u32 phys_lane1: 2; // [ 3: 2] (2) Physical lane for logical lane 1
u32 phys_lane0: 2; // [ 1: 0] (1) Physical lane for logical lane 0 u32 phys_lane0: 2; // [ 1: 0] (1) Physical lane for logical lane 0
u32 phys_lane1: 2; // [ 3: 2] (2) Physical lane for logical lane 1
u32 phys_lane2: 2; // [ 5: 4] (3) Physical lane for logical lane 2
u32 phys_lane3: 2; // [ 7: 6] (0) Physical lane for logical lane 3
u32 :24;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -709,16 +709,16 @@ typedef union { ...@@ -709,16 +709,16 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 pxd11: 8; // [31:24] (0) PXD11 input delay (3 LSB not used)
u32 pxd10: 8; // [23:16] (0) PXD10 input delay (3 LSB not used)
u32 pxd9: 8; // [15: 8] (0) PXD9 input delay (3 LSB not used)
u32 pxd8: 8; // [ 7: 0] (0) PXD8 input delay (3 LSB not used) u32 pxd8: 8; // [ 7: 0] (0) PXD8 input delay (3 LSB not used)
u32 pxd9: 8; // [15: 8] (0) PXD9 input delay (3 LSB not used)
u32 pxd10: 8; // [23:16] (0) PXD10 input delay (3 LSB not used)
u32 pxd11: 8; // [31:24] (0) PXD11 input delay (3 LSB not used)
}; };
struct { struct {
u32 dly_lane3: 8; // [31:24] (0) lane 3 (phys) input delay (3 LSB not used)
u32 dly_lane2: 8; // [23:16] (0) lane 2 (phys) input delay (3 LSB not used)
u32 dly_lane1: 8; // [15: 8] (0) lane 1 (phys) input delay (3 LSB not used)
u32 dly_lane0: 8; // [ 7: 0] (0) lane 0 (phys) input delay (3 LSB not used) u32 dly_lane0: 8; // [ 7: 0] (0) lane 0 (phys) input delay (3 LSB not used)
u32 dly_lane1: 8; // [15: 8] (0) lane 1 (phys) input delay (3 LSB not used)
u32 dly_lane2: 8; // [23:16] (0) lane 2 (phys) input delay (3 LSB not used)
u32 dly_lane3: 8; // [31:24] (0) lane 3 (phys) input delay (3 LSB not used)
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -729,14 +729,14 @@ typedef union { ...@@ -729,14 +729,14 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 phase_p: 8; // [31:24] (0) MMCM phase
u32 bpf: 8; // [23:16] (0) BPF (clock from sensor) input delay (3 LSB not used)
u32 vact: 8; // [15: 8] (0) VACT input delay (3 LSB not used)
u32 hact: 8; // [ 7: 0] (0) HACT input delay (3 LSB not used) u32 hact: 8; // [ 7: 0] (0) HACT input delay (3 LSB not used)
u32 vact: 8; // [15: 8] (0) VACT input delay (3 LSB not used)
u32 bpf: 8; // [23:16] (0) BPF (clock from sensor) input delay (3 LSB not used)
u32 phase_p: 8; // [31:24] (0) MMCM phase
}; };
struct { struct {
u32 :24;
u32 phase_h: 8; // [ 7: 0] (0) MMCM phase u32 phase_h: 8; // [ 7: 0] (0) MMCM phase
u32 :24;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -747,8 +747,8 @@ typedef union { ...@@ -747,8 +747,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :16;
u32 sensor_width:16; // [15: 0] (0) Sensor frame width (0 - use line sync signals from the sensor) u32 sensor_width:16; // [15: 0] (0) Sensor frame width (0 - use line sync signals from the sensor)
u32 :16;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -759,46 +759,46 @@ typedef union { ...@@ -759,46 +759,46 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 : 6;
u32 sub_chn: 2; // [25:24] (0) Sensor subchannel
u32 addr: 8; // [23:16] (0) Lens correction address, should be written first (overlaps with data)
u32 :16; u32 :16;
u32 addr: 8; // [23:16] (0) Lens correction address, should be written first (overlaps with data)
u32 sub_chn: 2; // [25:24] (0) Sensor subchannel
u32 : 6;
}; };
struct { struct {
u32 :13;
u32 ax:19; // [18: 0] (0x20000) Coefficient Ax u32 ax:19; // [18: 0] (0x20000) Coefficient Ax
u32 :13;
}; };
struct { struct {
u32 :13;
u32 ay:19; // [18: 0] (0x20000) Coefficient Ay u32 ay:19; // [18: 0] (0x20000) Coefficient Ay
u32 :13;
}; };
struct { struct {
u32 :11;
u32 bx:21; // [20: 0] (0x180000) Coefficient Bx u32 bx:21; // [20: 0] (0x180000) Coefficient Bx
u32 :11;
}; };
struct { struct {
u32 :11;
u32 by:21; // [20: 0] (0x180000) Coefficient By u32 by:21; // [20: 0] (0x180000) Coefficient By
u32 :11;
}; };
struct { struct {
u32 :13;
u32 c:19; // [18: 0] (0x8000) Coefficient C u32 c:19; // [18: 0] (0x8000) Coefficient C
u32 :13;
}; };
struct { struct {
u32 :15;
u32 scale:17; // [16: 0] (0x8000) Scale (4 per-color values) u32 scale:17; // [16: 0] (0x8000) Scale (4 per-color values)
u32 :15;
}; };
struct { struct {
u32 :16;
u32 fatzero_in:16; // [15: 0] (0) 'Fat zero' on the input (subtract from the input) u32 fatzero_in:16; // [15: 0] (0) 'Fat zero' on the input (subtract from the input)
u32 :16;
}; };
struct { struct {
u32 :16;
u32 fatzero_out:16; // [15: 0] (0) 'Fat zero' on the output (add to the result) u32 fatzero_out:16; // [15: 0] (0) 'Fat zero' on the output (add to the result)
u32 :16;
}; };
struct { struct {
u32 :28;
u32 post_scale: 4; // [ 3: 0] (1) Shift result (bits) u32 post_scale: 4; // [ 3: 0] (1) Shift result (bits)
u32 :28;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -809,8 +809,8 @@ typedef union { ...@@ -809,8 +809,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :16;
u32 height_m1:16; // [15: 0] (0) Height of subframe minus 1 u32 height_m1:16; // [15: 0] (0) Height of subframe minus 1
u32 :16;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -821,8 +821,8 @@ typedef union { ...@@ -821,8 +821,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 top:16; // [31:16] (0) Histogram window top margin
u32 left:16; // [15: 0] (0) Histogram window left margin u32 left:16; // [15: 0] (0) Histogram window left margin
u32 top:16; // [31:16] (0) Histogram window top margin
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -833,8 +833,8 @@ typedef union { ...@@ -833,8 +833,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 height_m1:16; // [31:16] (0) Height of he histogram window minus 1. If 0 - use frame bottom margin (end of VACT)
u32 width_m1:16; // [15: 0] (0) Width of the histogram window minus 1. If 0 - use frame right margin (end of HACT) u32 width_m1:16; // [15: 0] (0) Width of the histogram window minus 1. If 0 - use frame right margin (end of HACT)
u32 height_m1:16; // [31:16] (0) Height of he histogram window minus 1. If 0 - use frame bottom margin (end of VACT)
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -845,12 +845,12 @@ typedef union { ...@@ -845,12 +845,12 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :24;
u32 cache: 4; // [ 7: 4] (3) AXI cache mode (normal - 3), ignored by Zynq?
u32 : 1;
u32 confirm: 1; // [ 2] (1) 1 - wait for confirmation that histogram was written to the system memory
u32 nrst: 1; // [ 1] (1) 0 - reset histograms DMA
u32 en: 1; // [ 0] (1) Enable histograms DMA u32 en: 1; // [ 0] (1) Enable histograms DMA
u32 nrst: 1; // [ 1] (1) 0 - reset histograms DMA
u32 confirm: 1; // [ 2] (1) 1 - wait for confirmation that histogram was written to the system memory
u32 : 1;
u32 cache: 4; // [ 7: 4] (3) AXI cache mode (normal - 3), ignored by Zynq?
u32 :24;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -861,8 +861,8 @@ typedef union { ...@@ -861,8 +861,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :12;
u32 page:20; // [19: 0] (0) Start address of the subchannel histogram (in pages = 4096 bytes u32 page:20; // [19: 0] (0) Start address of the subchannel histogram (in pages = 4096 bytes
u32 :12;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -873,22 +873,22 @@ typedef union { ...@@ -873,22 +873,22 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 : 8;
u32 focus_set: 1; // [ 23] (0) Set 'focus'
u32 focus: 2; // [22:21] (0) Focus mode
u32 bayer_set: 1; // [ 20] (0) Set 'bayer'
u32 bayer: 2; // [19:18] (0) Bayer shift
u32 : 2;
u32 multiframe_set: 1; // [ 15] (0) Set 'multiframe'
u32 multiframe: 1; // [ 14] (0) Multi/single frame mode
u32 cmode_set: 1; // [ 13] (0) Set 'cmode'
u32 cmode: 4; // [12: 9] (0) Color format
u32 dcsub_set: 1; // [ 8] (0) Set 'qbank'
u32 dcsub: 1; // [ 7] (0) Subtract DC enable
u32 qbank_set: 1; // [ 6] (0) Set 'qbank'
u32 qbank: 3; // [ 5: 3] (0) Quantization table bank
u32 run_set: 1; // [ 2] (0) Set 'run'
u32 run: 2; // [ 1: 0] (0) Run mode u32 run: 2; // [ 1: 0] (0) Run mode
u32 run_set: 1; // [ 2] (0) Set 'run'
u32 qbank: 3; // [ 5: 3] (0) Quantization table bank
u32 qbank_set: 1; // [ 6] (0) Set 'qbank'
u32 dcsub: 1; // [ 7] (0) Subtract DC enable
u32 dcsub_set: 1; // [ 8] (0) Set 'qbank'
u32 cmode: 4; // [12: 9] (0) Color format
u32 cmode_set: 1; // [ 13] (0) Set 'cmode'
u32 multiframe: 1; // [ 14] (0) Multi/single frame mode
u32 multiframe_set: 1; // [ 15] (0) Set 'multiframe'
u32 : 2;
u32 bayer: 2; // [19:18] (0) Bayer shift
u32 bayer_set: 1; // [ 20] (0) Set 'bayer'
u32 focus: 2; // [22:21] (0) Focus mode
u32 focus_set: 1; // [ 23] (0) Set 'focus'
u32 : 8;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -899,8 +899,8 @@ typedef union { ...@@ -899,8 +899,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :29;
u32 coring_table: 3; // [ 2: 0] (0) Select coring table pair number u32 coring_table: 3; // [ 2: 0] (0) Select coring table pair number
u32 :29;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -911,10 +911,10 @@ typedef union { ...@@ -911,10 +911,10 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :10;
u32 colorsat_red:10; // [21:12] (0x16c) Color saturation for red (0xb6 - 100%)
u32 : 2;
u32 colorsat_blue:10; // [ 9: 0] (0x120) Color saturation for blue (0x90 - 100%) u32 colorsat_blue:10; // [ 9: 0] (0x120) Color saturation for blue (0x90 - 100%)
u32 : 2;
u32 colorsat_red:10; // [21:12] (0x16c) Color saturation for red (0xb6 - 100%)
u32 :10;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -925,10 +925,10 @@ typedef union { ...@@ -925,10 +925,10 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 : 1;
u32 left_margin: 5; // [30:26] (0) Left margin of the first pixel (0..31) for 32-pixel wide colums in memory access
u32 num_macro_rows_m1:13; // [25:13] (0) Number of macroblock rows minus 1
u32 num_macro_cols_m1:13; // [12: 0] (0) Number of macroblock colums minus 1 u32 num_macro_cols_m1:13; // [12: 0] (0) Number of macroblock colums minus 1
u32 num_macro_rows_m1:13; // [25:13] (0) Number of macroblock rows minus 1
u32 left_margin: 5; // [30:26] (0) Left margin of the first pixel (0..31) for 32-pixel wide colums in memory access
u32 : 1;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -939,8 +939,8 @@ typedef union { ...@@ -939,8 +939,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :30;
u32 interrupt_cmd: 2; // [ 1: 0] (0) 0: nop, 1: clear interrupt status, 2: disable interrupt, 3: enable interrupt u32 interrupt_cmd: 2; // [ 1: 0] (0) 0: nop, 1: clear interrupt status, 2: disable interrupt, 3: enable interrupt
u32 :30;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -951,9 +951,9 @@ typedef union { ...@@ -951,9 +951,9 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 : 6;
u32 type: 2; // [25:24] (0) 0: quantization, 1: coring, 2: focus, 3: huffman
u32 addr32:24; // [23: 0] (0) Table address to start writing to (autoincremented) for DWORDs u32 addr32:24; // [23: 0] (0) Table address to start writing to (autoincremented) for DWORDs
u32 type: 2; // [25:24] (0) 0: quantization, 1: coring, 2: focus, 3: huffman
u32 : 6;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -964,13 +964,13 @@ typedef union { ...@@ -964,13 +964,13 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 seq_num: 6; // [31:26] (0) Status sequence number
u32 :21;
u32 flushing_fifo: 1; // [ 4] (0) Compressor channel is flushing FIFO (debug feature)
u32 stuffer_running: 1; // [ 3] (0) Compressor channel bit stuffer is running (debug feature)
u32 reading_frame: 1; // [ 2] (0) Compressor channel is reading frame from memory (debug feature)
u32 im: 1; // [ 1] (0) Compressor channel interrupt mask
u32 is: 1; // [ 0] (0) Compressor channel interrupt status u32 is: 1; // [ 0] (0) Compressor channel interrupt status
u32 im: 1; // [ 1] (0) Compressor channel interrupt mask
u32 reading_frame: 1; // [ 2] (0) Compressor channel is reading frame from memory (debug feature)
u32 stuffer_running: 1; // [ 3] (0) Compressor channel bit stuffer is running (debug feature)
u32 flushing_fifo: 1; // [ 4] (0) Compressor channel is flushing FIFO (debug feature)
u32 :21;
u32 seq_num: 6; // [31:26] (0) Status sequence number
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -981,8 +981,8 @@ typedef union { ...@@ -981,8 +981,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 : 5;
u32 sa256:27; // [26: 0] (0) System memory buffer start in multiples of 32 bytes (256 bits) u32 sa256:27; // [26: 0] (0) System memory buffer start in multiples of 32 bytes (256 bits)
u32 : 5;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -993,8 +993,8 @@ typedef union { ...@@ -993,8 +993,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 : 5;
u32 len256:27; // [26: 0] (0) System memory buffer length in multiples of 32 bytes (256 bits) u32 len256:27; // [26: 0] (0) System memory buffer length in multiples of 32 bytes (256 bits)
u32 : 5;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -1005,11 +1005,11 @@ typedef union { ...@@ -1005,11 +1005,11 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :28;
u32 rst3: 1; // [ 3] (0) AXI HPx sub-channel0 reset (0 - normal operation, 1 - reset)
u32 rst2: 1; // [ 2] (0) AXI HPx sub-channel0 reset (0 - normal operation, 1 - reset)
u32 rst1: 1; // [ 1] (0) AXI HPx sub-channel0 reset (0 - normal operation, 1 - reset)
u32 rst0: 1; // [ 0] (0) AXI HPx sub-channel0 reset (0 - normal operation, 1 - reset) u32 rst0: 1; // [ 0] (0) AXI HPx sub-channel0 reset (0 - normal operation, 1 - reset)
u32 rst1: 1; // [ 1] (0) AXI HPx sub-channel0 reset (0 - normal operation, 1 - reset)
u32 rst2: 1; // [ 2] (0) AXI HPx sub-channel0 reset (0 - normal operation, 1 - reset)
u32 rst3: 1; // [ 3] (0) AXI HPx sub-channel0 reset (0 - normal operation, 1 - reset)
u32 :28;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -1020,17 +1020,17 @@ typedef union { ...@@ -1020,17 +1020,17 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :22;
u32 en_set: 1; // [ 9] (0) 0 - nop, 1 - set en
u32 en: 1; // [ 8] (0) AXI HPx global enable value to set (0 - pause, 1 - run)
u32 en3_set: 1; // [ 7] (0) 0 - nop, 1 - set en3
u32 en3: 1; // [ 6] (0) AXI HPx sub-channel3 enable value to set (0 - pause, 1 - run)
u32 en2_set: 1; // [ 5] (0) 0 - nop, 1 - set en2
u32 en2: 1; // [ 4] (0) AXI HPx sub-channel2 enable value to set (0 - pause, 1 - run)
u32 en1_set: 1; // [ 3] (0) 0 - nop, 1 - set en1
u32 en1: 1; // [ 2] (0) AXI HPx sub-channel1 enable value to set (0 - pause, 1 - run)
u32 en0_set: 1; // [ 1] (0) 0 - nop, 1 - set en0
u32 en0: 1; // [ 0] (0) AXI HPx sub-channel0 enable value to set (0 - pause, 1 - run) u32 en0: 1; // [ 0] (0) AXI HPx sub-channel0 enable value to set (0 - pause, 1 - run)
u32 en0_set: 1; // [ 1] (0) 0 - nop, 1 - set en0
u32 en1: 1; // [ 2] (0) AXI HPx sub-channel1 enable value to set (0 - pause, 1 - run)
u32 en1_set: 1; // [ 3] (0) 0 - nop, 1 - set en1
u32 en2: 1; // [ 4] (0) AXI HPx sub-channel2 enable value to set (0 - pause, 1 - run)
u32 en2_set: 1; // [ 5] (0) 0 - nop, 1 - set en2
u32 en3: 1; // [ 6] (0) AXI HPx sub-channel3 enable value to set (0 - pause, 1 - run)
u32 en3_set: 1; // [ 7] (0) 0 - nop, 1 - set en3
u32 en: 1; // [ 8] (0) AXI HPx global enable value to set (0 - pause, 1 - run)
u32 en_set: 1; // [ 9] (0) 0 - nop, 1 - set en
u32 :22;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -1041,18 +1041,18 @@ typedef union { ...@@ -1041,18 +1041,18 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :17; u32 mode0: 2; // [ 1: 0] (0) channel0 report mode: 0 - EOF int, 1 - EOF confirmed, 2 - CP (current), 3 - CP confirmed
u32 mode3_set: 1; // [ 14] (0) 0 - nop, 1 - set mode0 u32 mode0_set: 1; // [ 2] (0) 0 - nop, 1 - set mode0
u32 mode3: 2; // [13:12] (0) channel0 report mode: 0 - EOF int, 1 - EOF confirmed, 2 - CP (current), 3 - CP confirmed
u32 : 1;
u32 mode2_set: 1; // [ 10] (0) 0 - nop, 1 - set mode0
u32 mode2: 2; // [ 9: 8] (0) channel0 report mode: 0 - EOF int, 1 - EOF confirmed, 2 - CP (current), 3 - CP confirmed
u32 : 1; u32 : 1;
u32 mode1_set: 1; // [ 6] (0) 0 - nop, 1 - set mode0
u32 mode1: 2; // [ 5: 4] (0) channel0 report mode: 0 - EOF int, 1 - EOF confirmed, 2 - CP (current), 3 - CP confirmed u32 mode1: 2; // [ 5: 4] (0) channel0 report mode: 0 - EOF int, 1 - EOF confirmed, 2 - CP (current), 3 - CP confirmed
u32 mode1_set: 1; // [ 6] (0) 0 - nop, 1 - set mode0
u32 : 1; u32 : 1;
u32 mode0_set: 1; // [ 2] (0) 0 - nop, 1 - set mode0 u32 mode2: 2; // [ 9: 8] (0) channel0 report mode: 0 - EOF int, 1 - EOF confirmed, 2 - CP (current), 3 - CP confirmed
u32 mode0: 2; // [ 1: 0] (0) channel0 report mode: 0 - EOF int, 1 - EOF confirmed, 2 - CP (current), 3 - CP confirmed u32 mode2_set: 1; // [ 10] (0) 0 - nop, 1 - set mode0
u32 : 1;
u32 mode3: 2; // [13:12] (0) channel0 report mode: 0 - EOF int, 1 - EOF confirmed, 2 - CP (current), 3 - CP confirmed
u32 mode3_set: 1; // [ 14] (0) 0 - nop, 1 - set mode0
u32 :17;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -1063,8 +1063,8 @@ typedef union { ...@@ -1063,8 +1063,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 seq_num: 6; // [31:26] (0) Status sequence number
u32 offset256:26; // [25: 0] (0) AFI MUX current/EOF pointer offset in 32-byte blocks u32 offset256:26; // [25: 0] (0) AFI MUX current/EOF pointer offset in 32-byte blocks
u32 seq_num: 6; // [31:26] (0) Status sequence number
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -1075,21 +1075,21 @@ typedef union { ...@@ -1075,21 +1075,21 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 chn_c: 2; // [31:30] (0) Enable C channel (logger): 0,1 - nop, 2 - disab;e, 3 - enable
u32 chn_b: 2; // [29:28] (0) Enable B channel (reserved): 0,1 - nop, 2 - disab;e, 3 - enable
u32 chn_a: 2; // [27:26] (0) Enable A channel (camsync): 0,1 - nop, 2 - disab;e, 3 - enable
u32 soft: 2; // [25:24] (0) Enable pin software control: 0,1 - nop, 2 - disab;e, 3 - enable
u32 : 4;
u32 pin9: 2; // [19:18] (0) Output control for pin 0: 0 - nop, 1 - set low, 2 - set high, 3 - tristate
u32 pin8: 2; // [17:16] (0) Output control for pin 8: 0 - nop, 1 - set low, 2 - set high, 3 - tristate
u32 pin7: 2; // [15:14] (0) Output control for pin 7: 0 - nop, 1 - set low, 2 - set high, 3 - tristate
u32 pin6: 2; // [13:12] (0) Output control for pin 6: 0 - nop, 1 - set low, 2 - set high, 3 - tristate
u32 pin5: 2; // [11:10] (0) Output control for pin 5: 0 - nop, 1 - set low, 2 - set high, 3 - tristate
u32 pin4: 2; // [ 9: 8] (0) Output control for pin 4: 0 - nop, 1 - set low, 2 - set high, 3 - tristate
u32 pin3: 2; // [ 7: 6] (0) Output control for pin 3: 0 - nop, 1 - set low, 2 - set high, 3 - tristate
u32 pin2: 2; // [ 5: 4] (0) Output control for pin 2: 0 - nop, 1 - set low, 2 - set high, 3 - tristate
u32 pin1: 2; // [ 3: 2] (0) Output control for pin 1: 0 - nop, 1 - set low, 2 - set high, 3 - tristate
u32 pin0: 2; // [ 1: 0] (0) Output control for pin 0: 0 - nop, 1 - set low, 2 - set high, 3 - tristate u32 pin0: 2; // [ 1: 0] (0) Output control for pin 0: 0 - nop, 1 - set low, 2 - set high, 3 - tristate
u32 pin1: 2; // [ 3: 2] (0) Output control for pin 1: 0 - nop, 1 - set low, 2 - set high, 3 - tristate
u32 pin2: 2; // [ 5: 4] (0) Output control for pin 2: 0 - nop, 1 - set low, 2 - set high, 3 - tristate
u32 pin3: 2; // [ 7: 6] (0) Output control for pin 3: 0 - nop, 1 - set low, 2 - set high, 3 - tristate
u32 pin4: 2; // [ 9: 8] (0) Output control for pin 4: 0 - nop, 1 - set low, 2 - set high, 3 - tristate
u32 pin5: 2; // [11:10] (0) Output control for pin 5: 0 - nop, 1 - set low, 2 - set high, 3 - tristate
u32 pin6: 2; // [13:12] (0) Output control for pin 6: 0 - nop, 1 - set low, 2 - set high, 3 - tristate
u32 pin7: 2; // [15:14] (0) Output control for pin 7: 0 - nop, 1 - set low, 2 - set high, 3 - tristate
u32 pin8: 2; // [17:16] (0) Output control for pin 8: 0 - nop, 1 - set low, 2 - set high, 3 - tristate
u32 pin9: 2; // [19:18] (0) Output control for pin 0: 0 - nop, 1 - set low, 2 - set high, 3 - tristate
u32 : 4;
u32 soft: 2; // [25:24] (0) Enable pin software control: 0,1 - nop, 2 - disab;e, 3 - enable
u32 chn_a: 2; // [27:26] (0) Enable A channel (camsync): 0,1 - nop, 2 - disab;e, 3 - enable
u32 chn_b: 2; // [29:28] (0) Enable B channel (reserved): 0,1 - nop, 2 - disab;e, 3 - enable
u32 chn_c: 2; // [31:30] (0) Enable C channel (logger): 0,1 - nop, 2 - disab;e, 3 - enable
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -1100,18 +1100,18 @@ typedef union { ...@@ -1100,18 +1100,18 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 seq_num: 6; // [31:26] (0) Status sequence number
u32 :16;
u32 pin9: 1; // [ 9] (0) GPIO pin 0 state
u32 pin8: 1; // [ 8] (0) GPIO pin 0 state
u32 pin7: 1; // [ 7] (0) GPIO pin 0 state
u32 pin6: 1; // [ 6] (0) GPIO pin 0 state
u32 pin5: 1; // [ 5] (0) GPIO pin 0 state
u32 pin4: 1; // [ 4] (0) GPIO pin 0 state
u32 pin3: 1; // [ 3] (0) GPIO pin 0 state
u32 pin2: 1; // [ 2] (0) GPIO pin 0 state
u32 pin1: 1; // [ 1] (0) GPIO pin 0 state
u32 pin0: 1; // [ 0] (0) GPIO pin 0 state u32 pin0: 1; // [ 0] (0) GPIO pin 0 state
u32 pin1: 1; // [ 1] (0) GPIO pin 0 state
u32 pin2: 1; // [ 2] (0) GPIO pin 0 state
u32 pin3: 1; // [ 3] (0) GPIO pin 0 state
u32 pin4: 1; // [ 4] (0) GPIO pin 0 state
u32 pin5: 1; // [ 5] (0) GPIO pin 0 state
u32 pin6: 1; // [ 6] (0) GPIO pin 0 state
u32 pin7: 1; // [ 7] (0) GPIO pin 0 state
u32 pin8: 1; // [ 8] (0) GPIO pin 0 state
u32 pin9: 1; // [ 9] (0) GPIO pin 0 state
u32 :16;
u32 seq_num: 6; // [31:26] (0) Status sequence number
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -1133,8 +1133,8 @@ typedef union { ...@@ -1133,8 +1133,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :12;
u32 usec:20; // [19: 0] (0) RTC microseconds u32 usec:20; // [19: 0] (0) RTC microseconds
u32 :12;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -1145,8 +1145,8 @@ typedef union { ...@@ -1145,8 +1145,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :16;
short corr:16; // [15: 0] (0) RTC correction, +/1 1/256 full scale short corr:16; // [15: 0] (0) RTC correction, +/1 1/256 full scale
u32 :16;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -1157,10 +1157,10 @@ typedef union { ...@@ -1157,10 +1157,10 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 seq_num: 6; // [31:26] (0) Status sequence number
u32 : 1;
u32 alt_snap: 1; // [ 24] (0) alternates 0/1 each time RTC timer makes a snapshot
u32 :24; u32 :24;
u32 alt_snap: 1; // [ 24] (0) alternates 0/1 each time RTC timer makes a snapshot
u32 : 1;
u32 seq_num: 6; // [31:26] (0) Status sequence number
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -1171,17 +1171,17 @@ typedef union { ...@@ -1171,17 +1171,17 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :12;
u32 line9: 2; // [19:18] (1) line 9 mode: 0 - inactive, 1 - keep (nop), 2 - active low, 3 - active high
u32 line8: 2; // [17:16] (1) line 8 mode: 0 - inactive, 1 - keep (nop), 2 - active low, 3 - active high
u32 line7: 2; // [15:14] (1) line 7 mode: 0 - inactive, 1 - keep (nop), 2 - active low, 3 - active high
u32 line6: 2; // [13:12] (1) line 6 mode: 0 - inactive, 1 - keep (nop), 2 - active low, 3 - active high
u32 line5: 2; // [11:10] (1) line 5 mode: 0 - inactive, 1 - keep (nop), 2 - active low, 3 - active high
u32 line4: 2; // [ 9: 8] (1) line 4 mode: 0 - inactive, 1 - keep (nop), 2 - active low, 3 - active high
u32 line3: 2; // [ 7: 6] (1) line 3 mode: 0 - inactive, 1 - keep (nop), 2 - active low, 3 - active high
u32 line2: 2; // [ 5: 4] (1) line 2 mode: 0 - inactive, 1 - keep (nop), 2 - active low, 3 - active high
u32 line1: 2; // [ 3: 2] (1) line 1 mode: 0 - inactive, 1 - keep (nop), 2 - active low, 3 - active high
u32 line0: 2; // [ 1: 0] (1) line 0 mode: 0 - inactive, 1 - keep (nop), 2 - active low, 3 - active high u32 line0: 2; // [ 1: 0] (1) line 0 mode: 0 - inactive, 1 - keep (nop), 2 - active low, 3 - active high
u32 line1: 2; // [ 3: 2] (1) line 1 mode: 0 - inactive, 1 - keep (nop), 2 - active low, 3 - active high
u32 line2: 2; // [ 5: 4] (1) line 2 mode: 0 - inactive, 1 - keep (nop), 2 - active low, 3 - active high
u32 line3: 2; // [ 7: 6] (1) line 3 mode: 0 - inactive, 1 - keep (nop), 2 - active low, 3 - active high
u32 line4: 2; // [ 9: 8] (1) line 4 mode: 0 - inactive, 1 - keep (nop), 2 - active low, 3 - active high
u32 line5: 2; // [11:10] (1) line 5 mode: 0 - inactive, 1 - keep (nop), 2 - active low, 3 - active high
u32 line6: 2; // [13:12] (1) line 6 mode: 0 - inactive, 1 - keep (nop), 2 - active low, 3 - active high
u32 line7: 2; // [15:14] (1) line 7 mode: 0 - inactive, 1 - keep (nop), 2 - active low, 3 - active high
u32 line8: 2; // [17:16] (1) line 8 mode: 0 - inactive, 1 - keep (nop), 2 - active low, 3 - active high
u32 line9: 2; // [19:18] (1) line 9 mode: 0 - inactive, 1 - keep (nop), 2 - active low, 3 - active high
u32 :12;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -1192,18 +1192,18 @@ typedef union { ...@@ -1192,18 +1192,18 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :17;
u32 ts_chns_set: 1; // [ 14] (0) Set 'ts_chns'
u32 ts_chns: 4; // [13:10] (1) Channels to generate timestmp messages (bit mask)
u32 master_chn_set: 1; // [ 9] (0) Set 'master_chn'
u32 master_chn: 2; // [ 8: 7] (0) master sensor channel (zero delay in internal trigger mode, delay used for flash output)
u32 trig_set: 1; // [ 6] (0) Set 'trig'
u32 trig: 1; // [ 5] (1) Sensor triggered mode (0 - free running sensor)
u32 ext_set: 1; // [ 4] (0) Set 'ext'
u32 ext: 1; // [ 3] (1) Use external (received) timestamps, if available. O - use local timestamps
u32 en_snd_set: 1; // [ 2] (0) Set 'en_snd'
u32 en_snd: 1; // [ 1] (1) Enable sending timestamps (valid with 'en_snd_set')
u32 en: 1; // [ 0] (1) Enable CAMSYNC module u32 en: 1; // [ 0] (1) Enable CAMSYNC module
u32 en_snd: 1; // [ 1] (1) Enable sending timestamps (valid with 'en_snd_set')
u32 en_snd_set: 1; // [ 2] (0) Set 'en_snd'
u32 ext: 1; // [ 3] (1) Use external (received) timestamps, if available. O - use local timestamps
u32 ext_set: 1; // [ 4] (0) Set 'ext'
u32 trig: 1; // [ 5] (1) Sensor triggered mode (0 - free running sensor)
u32 trig_set: 1; // [ 6] (0) Set 'trig'
u32 master_chn: 2; // [ 8: 7] (0) master sensor channel (zero delay in internal trigger mode, delay used for flash output)
u32 master_chn_set: 1; // [ 9] (0) Set 'master_chn'
u32 ts_chns: 4; // [13:10] (1) Channels to generate timestmp messages (bit mask)
u32 ts_chns_set: 1; // [ 14] (0) Set 'ts_chns'
u32 :17;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -1214,11 +1214,11 @@ typedef union { ...@@ -1214,11 +1214,11 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :17;
u32 reset: 1; // [ 14] (0) 1 - reset, 0 - normal operation
u32 run_cmd: 2; // [13:12] (0) Run command: 0,1 - nop, 2 - stop, 3 - run
u32 :10;
u32 interrupt_cmd: 2; // [ 1: 0] (0) Interrupt command: 0-nop, 1 - clear is, 2 - disable, 3 - enable u32 interrupt_cmd: 2; // [ 1: 0] (0) Interrupt command: 0-nop, 1 - clear is, 2 - disable, 3 - enable
u32 :10;
u32 run_cmd: 2; // [13:12] (0) Run command: 0,1 - nop, 2 - stop, 3 - run
u32 reset: 1; // [ 14] (0) 1 - reset, 0 - normal operation
u32 :17;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -1229,14 +1229,14 @@ typedef union { ...@@ -1229,14 +1229,14 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 seq_num: 6; // [31:26] (0) Status sequence number
u32 : 2;
u32 im: 4; // [23:20] (0) Interrupt enable: 1 bit per sensor channel
u32 is: 4; // [19:16] (0) Interrupt status: 1 bit per sensor channel
u32 frame_num3: 4; // [15:12] (0) Frame number for sensor 0
u32 frame_num2: 4; // [11: 8] (0) Frame number for sensor 0
u32 frame_num1: 4; // [ 7: 4] (0) Frame number for sensor 0
u32 frame_num0: 4; // [ 3: 0] (0) Frame number for sensor 0 u32 frame_num0: 4; // [ 3: 0] (0) Frame number for sensor 0
u32 frame_num1: 4; // [ 7: 4] (0) Frame number for sensor 0
u32 frame_num2: 4; // [11: 8] (0) Frame number for sensor 0
u32 frame_num3: 4; // [15:12] (0) Frame number for sensor 0
u32 is: 4; // [19:16] (0) Interrupt status: 1 bit per sensor channel
u32 im: 4; // [23:20] (0) Interrupt enable: 1 bit per sensor channel
u32 : 2;
u32 seq_num: 6; // [31:26] (0) Status sequence number
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -1247,9 +1247,9 @@ typedef union { ...@@ -1247,9 +1247,9 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 seq_num: 6; // [31:26] (0) Status sequence number
u32 : 2;
u32 sample:24; // [23: 0] (0) Logger sample number u32 sample:24; // [23: 0] (0) Logger sample number
u32 : 2;
u32 seq_num: 6; // [31:26] (0) Status sequence number
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -1260,9 +1260,9 @@ typedef union { ...@@ -1260,9 +1260,9 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :25;
u32 page: 2; // [ 6: 5] (0) Register page: configuration: 0, IMU: 3, GPS: 1, MSG: 2
u32 addr: 5; // [ 4: 0] (0) Register address (autoincrements in 32 DWORDs (page) range u32 addr: 5; // [ 4: 0] (0) Register address (autoincrements in 32 DWORDs (page) range
u32 page: 2; // [ 6: 5] (0) Register page: configuration: 0, IMU: 3, GPS: 1, MSG: 2
u32 :25;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -1273,18 +1273,18 @@ typedef union { ...@@ -1273,18 +1273,18 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :13;
u32 log_sync_set: 1; // [ 18] (0) Set 'log_sync' fields
u32 log_sync: 4; // [17:14] (0) Log frame sync events (bit per sensor channel)
u32 msg_set: 1; // [ 13] (0) Set 'msg_*' fields
u32 msg_invert: 1; // [ 12] (0) MSG input polarity - 0 - active high, 1 - active low
u32 msg_input: 4; // [11: 8] (0) MSG pin: GPIO pin number to accept external signal (0xf - disable)
u32 gps_set: 1; // [ 7] (0) Set 'gps_*' fields
u32 gps_ext: 1; // [ 6] (0) GPS sync to 1 pps signal (0 - sync to serial message)
u32 gps_invert: 1; // [ 5] (0) GPS inpert 1pps signal
u32 gps_slot: 2; // [ 4: 3] (0) GPS slot
u32 imu_set: 1; // [ 2] (0) Set 'imu_slot'
u32 imu_slot: 2; // [ 1: 0] (0) IMU slot u32 imu_slot: 2; // [ 1: 0] (0) IMU slot
u32 imu_set: 1; // [ 2] (0) Set 'imu_slot'
u32 gps_slot: 2; // [ 4: 3] (0) GPS slot
u32 gps_invert: 1; // [ 5] (0) GPS inpert 1pps signal
u32 gps_ext: 1; // [ 6] (0) GPS sync to 1 pps signal (0 - sync to serial message)
u32 gps_set: 1; // [ 7] (0) Set 'gps_*' fields
u32 msg_input: 4; // [11: 8] (0) MSG pin: GPIO pin number to accept external signal (0xf - disable)
u32 msg_invert: 1; // [ 12] (0) MSG input polarity - 0 - active high, 1 - active low
u32 msg_set: 1; // [ 13] (0) Set 'msg_*' fields
u32 log_sync: 4; // [17:14] (0) Log frame sync events (bit per sensor channel)
u32 log_sync_set: 1; // [ 18] (0) Set 'log_sync' fields
u32 :13;
}; };
struct { struct {
u32 data:32; // [31: 0] (0) Other logger register data (context-dependent) u32 data:32; // [31: 0] (0) Other logger register data (context-dependent)
...@@ -1298,8 +1298,8 @@ typedef union { ...@@ -1298,8 +1298,8 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 : 2;
u32 addr32:30; // [29: 0] (0) SAXI sddress/length in DWORDs u32 addr32:30; // [29: 0] (0) SAXI sddress/length in DWORDs
u32 : 2;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -1310,18 +1310,18 @@ typedef union { ...@@ -1310,18 +1310,18 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 :21;
u32 rst_ffclk1: 1; // [ 10] (0) reset ffclk1 (exteranl in, not yet used) toggle FF
u32 rst_ffclk0: 1; // [ 9] (0) reset ffclk0 (external in for sensors) toggle FF
u32 rst_memclk: 1; // [ 8] (0) reset memclk (external in for memory) toggle FF
u32 pwrdwn_clk3: 1; // [ 7] (0) reserved
u32 pwrdwn_clk2: 1; // [ 6] (0) reserved
u32 pwrdwn_clk1: 1; // [ 5] (0) Power down for pclk (sensors, from ffclk0)
u32 pwrdwnclk0: 1; // [ 4] (0) Power down PLL for xclk(240MHz), hclk(150MHz)
u32 rst_clk3: 1; // [ 3] (0) reserved
u32 rst_clk2: 1; // [ 2] (0) reserved
u32 rst_clk1: 1; // [ 1] (0) Reset PLL for pclk (sensors, from ffclk0)
u32 rst_clk0: 1; // [ 0] (0) Reset PLL for xclk(240MHz), hclk(150MHz) u32 rst_clk0: 1; // [ 0] (0) Reset PLL for xclk(240MHz), hclk(150MHz)
u32 rst_clk1: 1; // [ 1] (0) Reset PLL for pclk (sensors, from ffclk0)
u32 rst_clk2: 1; // [ 2] (0) reserved
u32 rst_clk3: 1; // [ 3] (0) reserved
u32 pwrdwnclk0: 1; // [ 4] (0) Power down PLL for xclk(240MHz), hclk(150MHz)
u32 pwrdwn_clk1: 1; // [ 5] (0) Power down for pclk (sensors, from ffclk0)
u32 pwrdwn_clk2: 1; // [ 6] (0) reserved
u32 pwrdwn_clk3: 1; // [ 7] (0) reserved
u32 rst_memclk: 1; // [ 8] (0) reset memclk (external in for memory) toggle FF
u32 rst_ffclk0: 1; // [ 9] (0) reset ffclk0 (external in for sensors) toggle FF
u32 rst_ffclk1: 1; // [ 10] (0) reset ffclk1 (exteranl in, not yet used) toggle FF
u32 :21;
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -1332,17 +1332,17 @@ typedef union { ...@@ -1332,17 +1332,17 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 seq_num: 6; // [31:26] (0) Status sequence number
u32 : 1;
u32 idelay_rdy: 1; // [ 24] (0) idelay_ctrl_rdy (juct to prevent from optimization)
u32 :17;
u32 tgl_ffclk1: 1; // [ 6] (0) ffclk1 (exteranl in, not yet used) toggle FF
u32 tgl_ffclk0: 1; // [ 5] (0) ffclk0 (external in for sensors) toggle FF
u32 tgl_memclk: 1; // [ 4] (0) memclk (external in for memory) toggle FF
u32 locked3: 1; // [ 3] (0) ==1, reserved
u32 locked2: 1; // [ 2] (0) ==1, reserved
u32 locked1: 1; // [ 1] (0) Locked PLL for pclk (sensors, from ffclk0)
u32 locked0: 1; // [ 0] (0) Locked PLL for xclk(240MHz), hclk(150MHz) u32 locked0: 1; // [ 0] (0) Locked PLL for xclk(240MHz), hclk(150MHz)
u32 locked1: 1; // [ 1] (0) Locked PLL for pclk (sensors, from ffclk0)
u32 locked2: 1; // [ 2] (0) ==1, reserved
u32 locked3: 1; // [ 3] (0) ==1, reserved
u32 tgl_memclk: 1; // [ 4] (0) memclk (external in for memory) toggle FF
u32 tgl_ffclk0: 1; // [ 5] (0) ffclk0 (external in for sensors) toggle FF
u32 tgl_ffclk1: 1; // [ 6] (0) ffclk1 (exteranl in, not yet used) toggle FF
u32 :17;
u32 idelay_rdy: 1; // [ 24] (0) idelay_ctrl_rdy (juct to prevent from optimization)
u32 : 1;
u32 seq_num: 6; // [31:26] (0) Status sequence number
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
...@@ -1353,10 +1353,10 @@ typedef union { ...@@ -1353,10 +1353,10 @@ typedef union {
typedef union { typedef union {
struct { struct {
u32 seq_num: 6; // [31:26] (0) Status sequence number
u32 : 1;
u32 tgl: 1; // [ 24] (0) Toggles for each DWORD received
u32 :24; u32 :24;
u32 tgl: 1; // [ 24] (0) Toggles for each DWORD received
u32 : 1;
u32 seq_num: 6; // [31:26] (0) Status sequence number
}; };
struct { struct {
u32 d32:32; // [31: 0] (0) cast to u32 u32 d32:32; // [31: 0] (0) cast to u32
......
...@@ -37,13 +37,14 @@ import errno ...@@ -37,13 +37,14 @@ import errno
import datetime import datetime
import vrlg import vrlg
class X393ExportC(object): class X393ExportC(object):
DRY_MODE = True # True DRY_MODE = True # True
DEBUG_MODE = 1 DEBUG_MODE = 1
MAXI0_BASE = 0x40000000 MAXI0_BASE = 0x40000000
verbose=1 MAXI0_RANGE = 0x00003000
func_decl=None verbose = 1
func_def= None func_decl = None
typedefs = None func_def = None
typedefs = None
gen_dir = "generated" gen_dir = "generated"
typdefs_file = "x393_types.h" # typdef for hardware registers typdefs_file = "x393_types.h" # typdef for hardware registers
header_file = "x393.h" # constant definitions and function declarations header_file = "x393.h" # constant definitions and function declarations
...@@ -144,6 +145,9 @@ class X393ExportC(object): ...@@ -144,6 +145,9 @@ class X393ExportC(object):
# Includes section # Includes section
txt = '\n#include <linux/io.h>\n' txt = '\n#include <linux/io.h>\n'
txt += '#include "x393.h"\n\n' txt += '#include "x393.h"\n\n'
txt += 'static void __iomem mmio_ptr;\n\n'
txt += '// init_mmio_ptr() should be called once before using any of the other defined functions\n\n'
txt += 'int init_mmio_ptr(void) {mmio_ptr = ioremap(0x%08x, 0x%08x); if (!mmio_ptr) return -1; else return 0;}\n'%(self.MAXI0_BASE,self.MAXI0_RANGE)
for d in ld: for d in ld:
fd=self.expand_define_maxi0(d, mode = "func_def",frmt_spcs = None) fd=self.expand_define_maxi0(d, mode = "func_def",frmt_spcs = None)
...@@ -1278,8 +1282,7 @@ class X393ExportC(object): ...@@ -1278,8 +1282,7 @@ class X393ExportC(object):
else: else:
td='d' td='d'
# s+='{ %s d; %s = readl(0x%08x'%(data_type, td,address) s+='{ %s d; %s = readl(mmio_ptr + '%(data_type, td)
s+='{ %s d; %s = readl((void*) '%(data_type, td)
if address_inc: if address_inc:
s+='(0x%08x'%(address) s+='(0x%08x'%(address)
if multivar: if multivar:
...@@ -1288,10 +1291,8 @@ class X393ExportC(object): ...@@ -1288,10 +1291,8 @@ class X393ExportC(object):
else: else:
s+=' + 0x%x * %s'%(address_inc, arg) s+=' + 0x%x * %s'%(address_inc, arg)
s += ')' s += ')'
# s+='return (%s) readl(0x%08x + 0x%x * %s)'%(data_type, address, address_inc, arg)
else: else:
s+='0x%08x'%(address) s+='0x%08x'%(address)
# s+='return (%s) readl(0x%08x)'%(data_type, address)
s+='); return d; }' s+='); return d; }'
else: else:
s += ';' s += ';'
...@@ -1336,7 +1337,7 @@ class X393ExportC(object): ...@@ -1336,7 +1337,7 @@ class X393ExportC(object):
td = 'd.%s'%(frmt_spcs['data32']) td = 'd.%s'%(frmt_spcs['data32'])
else: else:
td='d' td='d'
s+='{writel(%s, (void *) '%(td) s+='{writel(%s, mmio_ptr + '%(td)
if address_inc: if address_inc:
s+='(0x%08x'%(address) s+='(0x%08x'%(address)
if multivar: if multivar:
...@@ -1382,7 +1383,7 @@ class X393ExportC(object): ...@@ -1382,7 +1383,7 @@ class X393ExportC(object):
s = self.str_tab_stop(s,stops[2]) s = self.str_tab_stop(s,stops[2])
if isDefine: if isDefine:
# s+='{' # s+='{'
s+='{writel(0, (void *) ' s+='{writel(0, mmio_ptr + '
if address_inc: if address_inc:
s+='(0x%08x'%(address) s+='(0x%08x'%(address)
if multivar: if multivar:
...@@ -2379,7 +2380,7 @@ class X393ExportC(object): ...@@ -2379,7 +2380,7 @@ class X393ExportC(object):
members = {} # name:tuple of (start, len) members = {} # name:tuple of (start, len)
for ns,struct in enumerate(data): for ns,struct in enumerate(data):
lines=self.get_pad32(struct, wlen=32, name=name, padLast=frmt_spcs['lastPad']) lines=self.get_pad32(struct, wlen=32, name=name, padLast=frmt_spcs['lastPad'])
lines.reverse() # lines.reverse()
#nameMembers #nameMembers
if isUnion: if isUnion:
s += " struct {\n" s += " struct {\n"
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment