marked correspondence to Python in Verilog testbench (2adfbae2) · Commits · Elphel / x393

x393_testbench02.tf

+20 −0

Original line number	Original line	Diff line number	Diff line
	@@ -2947,6 +2947,7 @@ task set_gpio_pins;
	end		end
	endtask		endtask

			// x393_sensor.py
	task set_sensor_mode;		task set_sensor_mode;
	input [1:0] num_sensor;		input [1:0] num_sensor;
	input [3:0] hist_en; // [0..3] 1 - enable histogram modules, disable after processing the started frame		input [3:0] hist_en; // [0..3] 1 - enable histogram modules, disable after processing the started frame
	@@ -2961,6 +2962,7 @@ task set_sensor_mode;

	endtask		endtask

			// x393_sensor.py
	task set_sensor_i2c_command;		task set_sensor_i2c_command;
	input [1:0] num_sensor;		input [1:0] num_sensor;
	input rst_cmd; // [14] reset all FIFO (takes 16 clock pulses), also - stops i2c until run command		input rst_cmd; // [14] reset all FIFO (takes 16 clock pulses), also - stops i2c until run command
	@@ -2981,6 +2983,7 @@ task set_sensor_i2c_command;
	endtask		endtask


			// x393_sensor.py
	task write_sensor_i2c;		task write_sensor_i2c;
	input [1:0] num_sensor;		input [1:0] num_sensor;
	input rel_addr; // 0 - absolute, 1 - relative		input rel_addr; // 0 - absolute, 1 - relative
	@@ -2997,6 +3000,7 @@ endtask



			// x393_sensor.py
	task set_sensor_io_ctl;		task set_sensor_io_ctl;
	input [1:0] num_sensor;		input [1:0] num_sensor;
	input [1:0] mrst; // <2: keep MRST, 2 - MRST low (active), 3 - high (inactive)		input [1:0] mrst; // <2: keep MRST, 2 - MRST low (active), 3 - high (inactive)
	@@ -3024,6 +3028,7 @@ task set_sensor_io_ctl;
	end		end
	endtask		endtask

			// x393_sensor.py
	task set_sensor_io_dly;		task set_sensor_io_dly;
	input [1:0] num_sensor;		input [1:0] num_sensor;
	input [127:0] dly; // {mmsm_phase, bpf, vact, hact, pxd11,...,pxd0]		input [127:0] dly; // {mmsm_phase, bpf, vact, hact, pxd11,...,pxd0]
	@@ -3048,6 +3053,7 @@ task set_sensor_io_dly;
	end		end
	endtask		endtask

			// x393_sensor.py
	task set_sensor_io_jtag; // SuppressThisWarning VEditor - may be unused		task set_sensor_io_jtag; // SuppressThisWarning VEditor - may be unused
	input [1:0] num_sensor;		input [1:0] num_sensor;
	input [1:0] pgmen; // <2: keep PGMEN, 2 - PGMEN low (inactive), 3 - high (active) enable JTAG control		input [1:0] pgmen; // <2: keep PGMEN, 2 - PGMEN low (inactive), 3 - high (active) enable JTAG control
	@@ -3069,6 +3075,7 @@ task set_sensor_io_jtag; // SuppressThisWarning VEditor - may be unused
	end		end
	endtask		endtask

			// x393_sensor.py
	task set_sensor_io_width;		task set_sensor_io_width;
	input [1:0] num_sensor;		input [1:0] num_sensor;
	input [15:0] width; // 0 - use HACT, >0 - generate HACT from start to specified width		input [15:0] width; // 0 - use HACT, >0 - generate HACT from start to specified width
	@@ -3081,6 +3088,7 @@ task set_sensor_io_width;

	endtask		endtask

			// x393_sensor.py
	task set_sensor_lens_flat_heights;		task set_sensor_lens_flat_heights;
	input [1:0] num_sensor;		input [1:0] num_sensor;
	input [15:0] height0_m1; // height of the first sub-frame minus 1		input [15:0] height0_m1; // height of the first sub-frame minus 1
	@@ -3095,6 +3103,7 @@ task set_sensor_lens_flat_heights;
	end		end
	endtask		endtask

			// x393_sensor.py
	task set_sensor_lens_flat_parameters;		task set_sensor_lens_flat_parameters;
	input [1:0] num_sensor;		input [1:0] num_sensor;
	input [1:0] num_sub_sensor;		input [1:0] num_sub_sensor;
	@@ -3154,6 +3163,7 @@ task set_sensor_lens_flat_parameters;
	end		end
	endtask		endtask

			// x393_sensor.py
	function [31:0] func_lens_data;		function [31:0] func_lens_data;
	input [1:0] num_sensor;		input [1:0] num_sensor;
	input [7:0] addr;		input [7:0] addr;
	@@ -3163,6 +3173,7 @@ function [31:0] func_lens_data;
	endfunction		endfunction


			// x393_sensor.py
	task program_curves;		task program_curves;
	input [1:0] num_sensor;		input [1:0] num_sensor;
	input [1:0] sub_channel;		input [1:0] sub_channel;
	@@ -3197,6 +3208,7 @@ task program_curves;
	endtask		endtask


			// x393_sensor.py
	task set_sensor_gamma_table_addr;		task set_sensor_gamma_table_addr;
	input [1:0] num_sensor;		input [1:0] num_sensor;
	input [1:0] sub_channel;		input [1:0] sub_channel;
	@@ -3221,6 +3233,7 @@ task set_sensor_gamma_table_addr;

	endtask		endtask

			// x393_sensor.py
	task set_sensor_gamma_table_data; // need 256 for a single color data		task set_sensor_gamma_table_data; // need 256 for a single color data
	input [1:0] num_sensor;		input [1:0] num_sensor;
	input [17:0] data18; // 18-bit table data		input [17:0] data18; // 18-bit table data
	@@ -3234,6 +3247,7 @@ task set_sensor_gamma_table_data; // need 256 for a single color data

	endtask		endtask

			// x393_sensor.py
	task set_sensor_gamma_heights;		task set_sensor_gamma_heights;
	input [1:0] num_sensor;		input [1:0] num_sensor;
	input [15:0] height0_m1; // height of the first sub-frame minus 1		input [15:0] height0_m1; // height of the first sub-frame minus 1
	@@ -3249,6 +3263,7 @@ task set_sensor_gamma_heights;
	end		end
	endtask		endtask

			// x393_sensor.py
	task set_sensor_gamma_ctl;		task set_sensor_gamma_ctl;
	input [1:0] num_sensor; // sensor channel number (0..3)		input [1:0] num_sensor; // sensor channel number (0..3)
	input [1:0] bayer; // bayer shift (0..3)		input [1:0] bayer; // bayer shift (0..3)
	@@ -3273,6 +3288,7 @@ task set_sensor_gamma_ctl;

	endtask		endtask

			// x393_sensor.py
	task set_sensor_histogram_window;		task set_sensor_histogram_window;
	input [1:0] num_sensor; // sensor channel number (0..3)		input [1:0] num_sensor; // sensor channel number (0..3)
	input [1:0] subchannel; // subchannel number (for multiplexed images)		input [1:0] subchannel; // subchannel number (for multiplexed images)
	@@ -3296,6 +3312,7 @@ task set_sensor_histogram_window;
	end		end
	endtask		endtask

			// x393_sensor.py
	task set_sensor_histogram_saxi;		task set_sensor_histogram_saxi;
	input en;		input en;
	input nrst;		input nrst;
	@@ -3312,6 +3329,7 @@ task set_sensor_histogram_saxi;
	end		end
	endtask		endtask

			// x393_sensor.py
	task set_sensor_histogram_saxi_addr;		task set_sensor_histogram_saxi_addr;
	input [1:0] num_sensor; // sensor channel number (0..3)		input [1:0] num_sensor; // sensor channel number (0..3)
	input [1:0] subchannel; // subchannel number (for multiplexed images)		input [1:0] subchannel; // subchannel number (for multiplexed images)
	@@ -3321,6 +3339,7 @@ task set_sensor_histogram_saxi_addr;
	end		end
	endtask		endtask

			// x393_sensor.py
	function [STATUS_DEPTH-1:0] func_status_addr_sensor_i2c;		function [STATUS_DEPTH-1:0] func_status_addr_sensor_i2c;
	input [1:0] num_sensor;		input [1:0] num_sensor;
	begin		begin
	@@ -3328,6 +3347,7 @@ function [STATUS_DEPTH-1:0] func_status_addr_sensor_i2c;
	end		end
	endfunction		endfunction

			// x393_sensor.py
	function [STATUS_DEPTH-1:0] func_status_addr_sensor_io;		function [STATUS_DEPTH-1:0] func_status_addr_sensor_io;
	input [1:0] num_sensor;		input [1:0] num_sensor;
	begin		begin

Admin message