Commit 2409993f authored by Andrey Filippov's avatar Andrey Filippov

Merge branch 'master' of git@git.elphel.com:Elphel/x393.git

parents 722e3aca 1cc2b47a
/*!
* @file x393_cur_params_target.vh
* @date 2015-02-07
* @author Andrey Filippov
* @date 2015-02-07
* @author Andrey Filippov
*
* @brief Memory controller parameters that need adjustment during training
* of the target. This file is individually updated on the target.
......@@ -51,4 +51,3 @@ localparam DLY_LANE1_IDELAY = 72'h186c6c726c746a7173;
localparam DLY_CMDA = 256'hd3d3dad2d1cccad2505050505050505050d4d1d1d2d2dbcad2cad3d4d2cacbd1;
localparam DLY_PHASE = 8'h34;
// localparam DFLT_WBUF_DELAY = 4'h9;
\ No newline at end of file
......@@ -2046,7 +2046,7 @@ input mem mtd4 ram1
self.x393_axi_tasks.write_control_register(base_addr + vrlg.MCNTRL_SCANLINE_MODE, mode)
def test_hispi_phases(self,num_sensor):
def hispi_phases_adjust(self,num_sensor):
"""
Try to adjust phases
@param num_sensor - sensor port number (0..3)
......@@ -2070,7 +2070,7 @@ input mem mtd4 ram1
value = 0
count = 0
for j in range(n):
for i in range(n):
# reset bits
thp_reset_flags(num_sensor)
......@@ -2078,7 +2078,14 @@ input mem mtd4 ram1
barrel = (status>>14)&0xff
barrel = (barrel>>(2*shift))&0x3
print(str(barrel)+" ",end='')
for j in range(4):
v = (status>>14)&0xff
v = (v>>(2*(3-j)))&0x3
print(str(v),end='')
print(".",end='')
#print(str(barrel)+" ",end='')
return barrel
......@@ -2088,16 +2095,19 @@ input mem mtd4 ram1
shift = shift*3
switched = False
start = 0
stop = 0
count = 0
value = 0
i1 = 0
i2 = 0
im = 0
for i in range(16):
if (i==8):
if (i==0):
phase0 += 0x4000
print("| ",end='')
if (i==8):
phase0 -= 0x4000
print("| ",end="")
# set phase
phase = phase0+((i%8)<<shift)
......@@ -2109,28 +2119,36 @@ input mem mtd4 ram1
barrel = thp_read_flags(num_sensor,bitshift)
if i==0:
if ((i==0)or(i==8)):
value = barrel
if i==8:
if not switched:
start = 0
count = 8
if (i<8 and i!=0):
if value!=barrel:
if not switched:
switched = True
else:
if not switched:
count += 1
if i>=8:
if value==barrel:
count += 1
print("")
return [start,count]
switched = False
else:
if (value!=barrel):
if i<8:
if not switched:
switched = True
value = barrel
i1 = i
else:
print("Unexpected phase shift at "+str(i))
else:
if not switched:
switched = True
value = barrel
i2 = i
else:
print("Unexpected phase shift at "+str(i))
i1 = i1&0x7
i2 = i2&0x7
if (abs(i2-i1)<2):
print("Error?")
target_phase = phase0 + (i1<<shift)
thp_set_phase(num_sensor,target_phase)
return target_phase
chn = num_sensor
......@@ -2151,22 +2169,48 @@ input mem mtd4 ram1
phase0 = 0x8000
for i in range(4):
print("")
print("D"+str(i))
res = thp_run(num_sensor,phase0,i,i)
phase = ((res[0]+(res[1]>>1))%8)<<(3*i)
phase0 += phase
phase0 = thp_run(num_sensor,phase0,i,i)
print("Updated phase = 0x"+"{:04x}".format(phase0))
print("i = "+str(res[0])+" count = "+str(res[1]))
if (res[1]<2):
print("ERROR_D"+str(i))
print("Done")
print("Done")
def hispi_test_i2c_write(self,num_sensor):
"""
Test i2c writes
@param num_sensor - sensor port number (0..3)
"""
for i in range(10000000):
if (i%10000==0):
print("iteration: "+str(i))
fname = "/sys/devices/soc0/elphel393-sensor-i2c@0/i2c"+str(num_sensor)
val = str(hex(0x8000+(i&0xfff)))
f = open(fname,'w')
f.write("mt9f002 0 0x31c0 "+val)
f.close()
#time.sleep(0.5)
# initiate read
f = open(fname,'w')
f.write("mt9f002 0 0x31c0")
f.close()
# read
f = open(fname,'r')
res = int(f.read())
f.close()
if (res!=int(val,0)):
print(res+" vs "+val)
break
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment