for Yocto 2.1

src/drivers/Kconfig

+menu "Device Drivers"
+
+source "drivers/amba/Kconfig"
+
+source "drivers/base/Kconfig"
+
+source "drivers/bus/Kconfig"
+
+source "drivers/connector/Kconfig"
+
+source "drivers/mtd/Kconfig"
+
+source "drivers/of/Kconfig"
+
+source "drivers/parport/Kconfig"
+
+source "drivers/pnp/Kconfig"
+
+source "drivers/block/Kconfig"
+
+source "drivers/nvme/Kconfig"
+
+# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4
+
+source "drivers/misc/Kconfig"
+
+source "drivers/ide/Kconfig"
+
+source "drivers/scsi/Kconfig"
+
+source "drivers/ata/Kconfig"
+
+source "drivers/md/Kconfig"
+
+source "drivers/target/Kconfig"
+
+source "drivers/message/fusion/Kconfig"
+
+source "drivers/firewire/Kconfig"
+
+source "drivers/macintosh/Kconfig"
+
+source "drivers/net/Kconfig"
+
+source "drivers/isdn/Kconfig"
+
+source "drivers/lightnvm/Kconfig"
+
+# input before char - char/joystick depends on it. As does USB.
+
+source "drivers/input/Kconfig"
+
+source "drivers/char/Kconfig"
+
+source "drivers/i2c/Kconfig"
+
+source "drivers/spi/Kconfig"
+
+source "drivers/spmi/Kconfig"
+
+source "drivers/hsi/Kconfig"
+
+source "drivers/pps/Kconfig"
+
+source "drivers/ptp/Kconfig"
+
+source "drivers/pinctrl/Kconfig"
+
+source "drivers/gpio/Kconfig"
+
+source "drivers/w1/Kconfig"
+
+source "drivers/power/Kconfig"
+
+source "drivers/hwmon/Kconfig"
+
+source "drivers/thermal/Kconfig"
+
+source "drivers/watchdog/Kconfig"
+
+source "drivers/ssb/Kconfig"
+
+source "drivers/bcma/Kconfig"
+
+source "drivers/mfd/Kconfig"
+
+source "drivers/regulator/Kconfig"
+
+source "drivers/media/Kconfig"
+
+source "drivers/video/Kconfig"
+
+source "sound/Kconfig"
+
+source "drivers/hid/Kconfig"
+
+source "drivers/usb/Kconfig"
+
+source "drivers/uwb/Kconfig"
+
+source "drivers/mmc/Kconfig"
+
+source "drivers/memstick/Kconfig"
+
+source "drivers/leds/Kconfig"
+
+source "drivers/accessibility/Kconfig"
+
+source "drivers/infiniband/Kconfig"
+
+source "drivers/edac/Kconfig"
+
+source "drivers/rtc/Kconfig"
+
+source "drivers/dma/Kconfig"
+
+source "drivers/dca/Kconfig"
+
+source "drivers/auxdisplay/Kconfig"
+
+source "drivers/uio/Kconfig"
+
+source "drivers/vfio/Kconfig"
+
+source "drivers/vlynq/Kconfig"
+
+source "drivers/virt/Kconfig"
+
+source "drivers/virtio/Kconfig"
+
+source "drivers/hv/Kconfig"
+
+source "drivers/xen/Kconfig"
+
+source "drivers/staging/Kconfig"
+
+source "drivers/platform/Kconfig"
+
+source "drivers/clk/Kconfig"
+
+source "drivers/hwspinlock/Kconfig"
+
+source "drivers/clocksource/Kconfig"
+
+source "drivers/mailbox/Kconfig"
+
+source "drivers/iommu/Kconfig"
+
+source "drivers/remoteproc/Kconfig"
+
+source "drivers/rpmsg/Kconfig"
+
+source "drivers/soc/Kconfig"
+
+source "drivers/devfreq/Kconfig"
+
+source "drivers/extcon/Kconfig"
+
+source "drivers/memory/Kconfig"
+
+source "drivers/iio/Kconfig"
+
+source "drivers/ntb/Kconfig"
+
+source "drivers/vme/Kconfig"
+
+source "drivers/pwm/Kconfig"
+
+source "drivers/irqchip/Kconfig"
+
+source "drivers/ipack/Kconfig"
+
+source "drivers/reset/Kconfig"
+
+source "drivers/fmc/Kconfig"
+
+source "drivers/phy/Kconfig"
+
+source "drivers/powercap/Kconfig"
+
+source "drivers/mcb/Kconfig"
+
+source "drivers/perf/Kconfig"
+
+source "drivers/ras/Kconfig"
+
+source "drivers/thunderbolt/Kconfig"
+
+source "drivers/android/Kconfig"
+
+source "drivers/nvdimm/Kconfig"
+
+source "drivers/nvmem/Kconfig"
+
+source "drivers/hwtracing/stm/Kconfig"
+
+source "drivers/hwtracing/intel_th/Kconfig"
+
+source "drivers/fpga/Kconfig"
+
+source "drivers/elphel/Kconfig"
+
+endmenu

src/drivers/Makefile

@@ -11,7 +11,7 @@ obj-y				+= bus/
 obj-$(CONFIG_GENERIC_PHY)	+= phy/
 
 # GPIO must come after pinctrl as gpios may need to mux pins etc
-obj-y				+= pinctrl/
+obj-$(CONFIG_PINCTRL)		+= pinctrl/
 obj-y				+= gpio/
 obj-y				+= pwm/
 obj-$(CONFIG_PCI)		+= pci/
@@ -63,19 +63,23 @@ obj-$(CONFIG_FB_I810)           += video/fbdev/i810/
 obj-$(CONFIG_FB_INTEL)          += video/fbdev/intelfb/
 
 obj-$(CONFIG_PARPORT)		+= parport/
+obj-$(CONFIG_NVM)		+= lightnvm/
 obj-y				+= base/ block/ misc/ mfd/ nfc/
+obj-$(CONFIG_LIBNVDIMM)		+= nvdimm/
 obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf/
 obj-$(CONFIG_NUBUS)		+= nubus/
 obj-y				+= macintosh/
 obj-$(CONFIG_IDE)		+= ide/
 obj-$(CONFIG_SCSI)		+= scsi/
+obj-y				+= nvme/
 obj-$(CONFIG_ATA)		+= ata/
 obj-$(CONFIG_TARGET_CORE)	+= target/
 obj-$(CONFIG_MTD)		+= mtd/
 obj-$(CONFIG_SPI)		+= spi/
 obj-$(CONFIG_SPMI)		+= spmi/
 obj-y				+= hsi/
-
+# elphel393: moving net/ to the bottom because of driver order conflicts
+#obj-y				+= net/
 obj-$(CONFIG_ATM)		+= atm/
 obj-$(CONFIG_FUSION)		+= message/
 obj-y				+= firewire/
@@ -98,7 +102,6 @@ obj-$(CONFIG_USB_GADGET)	+= usb/
 obj-$(CONFIG_SERIO)		+= input/serio/
 obj-$(CONFIG_GAMEPORT)		+= input/gameport/
 obj-$(CONFIG_INPUT)		+= input/
-obj-$(CONFIG_I2O)		+= message/
 obj-$(CONFIG_RTC_LIB)		+= rtc/
 obj-y				+= i2c/ media/
 obj-$(CONFIG_PPS)		+= pps/
@@ -161,13 +164,19 @@ obj-$(CONFIG_NTB)		+= ntb/
 obj-$(CONFIG_FMC)		+= fmc/
 obj-$(CONFIG_POWERCAP)		+= powercap/
 obj-$(CONFIG_MCB)		+= mcb/
+obj-$(CONFIG_PERF_EVENTS)	+= perf/
 obj-$(CONFIG_RAS)		+= ras/
 obj-$(CONFIG_THUNDERBOLT)	+= thunderbolt/
-obj-$(CONFIG_CORESIGHT)		+= coresight/
+obj-$(CONFIG_CORESIGHT)		+= hwtracing/coresight/
+obj-y				+= hwtracing/intel_th/
+obj-$(CONFIG_STM)		+= hwtracing/stm/
 obj-$(CONFIG_ANDROID)		+= android/
+obj-$(CONFIG_NVMEM)		+= nvmem/
+obj-$(CONFIG_FPGA)		+= fpga/
 
-obj-$(CONFIG_ELPHEL393)		+= elphel/
+# elphel393: extra config parameters
+obj-$(CONFIG_ELPHEL393)			+= elphel/
 obj-$(CONFIG_ELPHELDRVONMICROZED)	+= elphel/
-obj-$(CONFIG_ELPHEL393_EXTERNAL)       += elphel/
+obj-$(CONFIG_ELPHEL393_EXTERNAL)       	+= elphel/
 
 obj-y				+= net/

src/drivers/clk/Kconfig

+
+config CLKDEV_LOOKUP
+	bool
+	select HAVE_CLK
+
+config HAVE_CLK_PREPARE
+	bool
+
+config HAVE_MACH_CLKDEV
+	bool
+
+config COMMON_CLK
+	bool
+	select HAVE_CLK_PREPARE
+	select CLKDEV_LOOKUP
+	select SRCU
+	select RATIONAL
+	---help---
+	  The common clock framework is a single definition of struct
+	  clk, useful across many platforms, as well as an
+	  implementation of the clock API in include/linux/clk.h.
+	  Architectures utilizing the common struct clk should select
+	  this option.
+
+menu "Common Clock Framework"
+	depends on COMMON_CLK
+
+config COMMON_CLK_WM831X
+	tristate "Clock driver for WM831x/2x PMICs"
+	depends on MFD_WM831X
+	---help---
+          Supports the clocking subsystem of the WM831x/2x series of
+	  PMICs from Wolfson Microelectronics.
+
+source "drivers/clk/versatile/Kconfig"
+
+config COMMON_CLK_MAX_GEN
+        bool
+
+config COMMON_CLK_MAX77686
+	tristate "Clock driver for Maxim 77686 MFD"
+	depends on MFD_MAX77686
+	select COMMON_CLK_MAX_GEN
+	---help---
+	  This driver supports Maxim 77686 crystal oscillator clock. 
+
+config COMMON_CLK_MAX77802
+	tristate "Clock driver for Maxim 77802 PMIC"
+	depends on MFD_MAX77686
+	select COMMON_CLK_MAX_GEN
+	---help---
+	  This driver supports Maxim 77802 crystal oscillator clock.
+
+config COMMON_CLK_RK808
+	tristate "Clock driver for RK808"
+	depends on MFD_RK808
+	---help---
+	  This driver supports RK808 crystal oscillator clock. These
+	  multi-function devices have two fixed-rate oscillators,
+	  clocked at 32KHz each. Clkout1 is always on, Clkout2 can off
+	  by control register.
+
+config COMMON_CLK_SCPI
+	tristate "Clock driver controlled via SCPI interface"
+	depends on ARM_SCPI_PROTOCOL || COMPILE_TEST
+	  ---help---
+	  This driver provides support for clocks that are controlled
+	  by firmware that implements the SCPI interface.
+
+	  This driver uses SCPI Message Protocol to interact with the
+	  firmware providing all the clock controls.
+
+config COMMON_CLK_SI5338
+	tristate "Support Silicon Laboratories SI5338 Quad Clock Generator"
+	depends on I2C
+	select REGMAP_I2C
+	select RATIONAL
+	help
+	 Say Y here if you have a SI5338 Quad Clock Generator IC on the I2C bus.
+	 To compile this driver as a module, choose M here: the
+	 module will be called si5338.
+
+config COMMON_CLK_SI5351
+	tristate "Clock driver for SiLabs 5351A/B/C"
+	depends on I2C
+	select REGMAP_I2C
+	select RATIONAL
+	---help---
+	  This driver supports Silicon Labs 5351A/B/C programmable clock
+	  generators.
+
+config COMMON_CLK_SI514
+	tristate "Clock driver for SiLabs 514 devices"
+	depends on I2C
+	depends on OF
+	select REGMAP_I2C
+	help
+	---help---
+	  This driver supports the Silicon Labs 514 programmable clock
+	  generator.
+
+config COMMON_CLK_SI570
+	tristate "Clock driver for SiLabs 570 and compatible devices"
+	depends on I2C
+	depends on OF
+	select REGMAP_I2C
+	help
+	---help---
+	  This driver supports Silicon Labs 570/571/598/599 programmable
+	  clock generators.
+
+config COMMON_CLK_CDCE925
+	tristate "Clock driver for TI CDCE925 devices"
+	depends on I2C
+	depends on OF
+	select REGMAP_I2C
+	help
+	---help---
+	  This driver supports the TI CDCE925 programmable clock synthesizer.
+	  The chip contains two PLLs with spread-spectrum clocking support and
+	  five output dividers. The driver only supports the following setup,
+	  and uses a fixed setting for the output muxes.
+	  Y1 is derived from the input clock
+	  Y2 and Y3 derive from PLL1
+	  Y4 and Y5 derive from PLL2
+	  Given a target output frequency, the driver will set the PLL and
+	  divider to best approximate the desired output.
+
+config COMMON_CLK_S2MPS11
+	tristate "Clock driver for S2MPS1X/S5M8767 MFD"
+	depends on MFD_SEC_CORE
+	---help---
+	  This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator
+	  clock. These multi-function devices have two (S2MPS14) or three
+	  (S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each.
+
+config CLK_TWL6040
+	tristate "External McPDM functional clock from twl6040"
+	depends on TWL6040_CORE
+	---help---
+	  Enable the external functional clock support on OMAP4+ platforms for
+	  McPDM. McPDM module is using the external bit clock on the McPDM bus
+	  as functional clock.
+
+config COMMON_CLK_AXI_CLKGEN
+	tristate "AXI clkgen driver"
+	depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST
+	help
+	---help---
+	  Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx
+	  FPGAs. It is commonly used in Analog Devices' reference designs.
+
+config CLK_QORIQ
+	bool "Clock driver for Freescale QorIQ platforms"
+	depends on (PPC_E500MC || ARM || ARM64 || COMPILE_TEST) && OF
+	---help---
+	  This adds the clock driver support for Freescale QorIQ platforms
+	  using common clock framework.
+
+config COMMON_CLK_XGENE
+	bool "Clock driver for APM XGene SoC"
+	default y
+	depends on ARM64 || COMPILE_TEST
+	---help---
+	  Sypport for the APM X-Gene SoC reference, PLL, and device clocks.
+
+config COMMON_CLK_KEYSTONE
+	tristate "Clock drivers for Keystone based SOCs"
+	depends on (ARCH_KEYSTONE || COMPILE_TEST) && OF
+	---help---
+          Supports clock drivers for Keystone based SOCs. These SOCs have local
+	  a power sleep control module that gate the clock to the IPs and PLLs.
+
+config COMMON_CLK_PALMAS
+	tristate "Clock driver for TI Palmas devices"
+	depends on MFD_PALMAS
+	---help---
+	  This driver supports TI Palmas devices 32KHz output KG and KG_AUDIO
+	  using common clock framework.
+
+config COMMON_CLK_PWM
+	tristate "Clock driver for PWMs used as clock outputs"
+	depends on PWM
+	---help---
+	  Adapter driver so that any PWM output can be (mis)used as clock signal
+	  at 50% duty cycle.
+
+config COMMON_CLK_PXA
+	def_bool COMMON_CLK && ARCH_PXA
+	---help---
+	  Sypport for the Marvell PXA SoC.
+
+config COMMON_CLK_CDCE706
+	tristate "Clock driver for TI CDCE706 clock synthesizer"
+	depends on I2C
+	select REGMAP_I2C
+	select RATIONAL
+	---help---
+	  This driver supports TI CDCE706 programmable 3-PLL clock synthesizer.
+
+source "drivers/clk/bcm/Kconfig"
+source "drivers/clk/hisilicon/Kconfig"
+source "drivers/clk/qcom/Kconfig"
+
+endmenu
+
+source "drivers/clk/mvebu/Kconfig"
+
+source "drivers/clk/samsung/Kconfig"
+source "drivers/clk/tegra/Kconfig"

src/drivers/clk/Makefile

+# common clock types
+obj-$(CONFIG_HAVE_CLK)		+= clk-devres.o
+obj-$(CONFIG_CLKDEV_LOOKUP)	+= clkdev.o
+obj-$(CONFIG_COMMON_CLK)	+= clk.o
+obj-$(CONFIG_COMMON_CLK)	+= clk-divider.o
+obj-$(CONFIG_COMMON_CLK)	+= clk-fixed-factor.o
+obj-$(CONFIG_COMMON_CLK)	+= clk-fixed-rate.o
+obj-$(CONFIG_COMMON_CLK)	+= clk-gate.o
+obj-$(CONFIG_COMMON_CLK)	+= clk-multiplier.o
+obj-$(CONFIG_COMMON_CLK)	+= clk-mux.o
+obj-$(CONFIG_COMMON_CLK)	+= clk-composite.o
+obj-$(CONFIG_COMMON_CLK)	+= clk-fractional-divider.o
+obj-$(CONFIG_COMMON_CLK)	+= clk-gpio.o
+ifeq ($(CONFIG_OF), y)
+obj-$(CONFIG_COMMON_CLK)	+= clk-conf.o
+endif
+
+# hardware specific clock types
+# please keep this section sorted lexicographically by file/directory path name
+obj-$(CONFIG_MACH_ASM9260)		+= clk-asm9260.o
+obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN)	+= clk-axi-clkgen.o
+obj-$(CONFIG_ARCH_AXXIA)		+= clk-axm5516.o
+obj-$(CONFIG_COMMON_CLK_CDCE706)	+= clk-cdce706.o
+obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o
+obj-$(CONFIG_ARCH_EFM32)		+= clk-efm32gg.o
+obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o
+obj-$(CONFIG_MACH_LOONGSON32)		+= clk-ls1x.o
+obj-$(CONFIG_COMMON_CLK_MAX_GEN)	+= clk-max-gen.o
+obj-$(CONFIG_COMMON_CLK_MAX77686)	+= clk-max77686.o
+obj-$(CONFIG_COMMON_CLK_MAX77802)	+= clk-max77802.o
+obj-$(CONFIG_ARCH_MB86S7X)		+= clk-mb86s7x.o
+obj-$(CONFIG_ARCH_MOXART)		+= clk-moxart.o
+obj-$(CONFIG_ARCH_NOMADIK)		+= clk-nomadik.o
+obj-$(CONFIG_ARCH_NSPIRE)		+= clk-nspire.o
+obj-$(CONFIG_COMMON_CLK_PALMAS)		+= clk-palmas.o
+obj-$(CONFIG_CLK_QORIQ)			+= clk-qoriq.o
+obj-$(CONFIG_COMMON_CLK_RK808)		+= clk-rk808.o
+obj-$(CONFIG_COMMON_CLK_S2MPS11)	+= clk-s2mps11.o
+obj-$(CONFIG_COMMON_CLK_SCPI)           += clk-scpi.o
+# elphel393: si5338 driver
+obj-$(CONFIG_COMMON_CLK_SI5338)		+= clk-si5338.o
+obj-$(CONFIG_COMMON_CLK_SI5351)		+= clk-si5351.o
+obj-$(CONFIG_COMMON_CLK_SI514)		+= clk-si514.o
+obj-$(CONFIG_COMMON_CLK_SI570)		+= clk-si570.o
+obj-$(CONFIG_COMMON_CLK_CDCE925)	+= clk-cdce925.o
+obj-$(CONFIG_ARCH_STM32)		+= clk-stm32f4.o
+obj-$(CONFIG_CLK_TWL6040)		+= clk-twl6040.o
+obj-$(CONFIG_ARCH_U300)			+= clk-u300.o
+obj-$(CONFIG_ARCH_VT8500)		+= clk-vt8500.o
+obj-$(CONFIG_COMMON_CLK_WM831X)		+= clk-wm831x.o
+obj-$(CONFIG_COMMON_CLK_XGENE)		+= clk-xgene.o
+obj-$(CONFIG_COMMON_CLK_PWM)		+= clk-pwm.o
+obj-$(CONFIG_COMMON_CLK_AT91)		+= at91/
+obj-y					+= bcm/
+obj-$(CONFIG_ARCH_BERLIN)		+= berlin/
+obj-$(CONFIG_ARCH_HISI)			+= hisilicon/
+obj-$(CONFIG_ARCH_MXC)			+= imx/
+obj-$(CONFIG_MACH_INGENIC)		+= ingenic/
+obj-$(CONFIG_COMMON_CLK_KEYSTONE)	+= keystone/
+obj-$(CONFIG_ARCH_MEDIATEK)		+= mediatek/
+ifeq ($(CONFIG_COMMON_CLK), y)
+obj-$(CONFIG_ARCH_MMP)			+= mmp/
+endif
+obj-$(CONFIG_PLAT_ORION)		+= mvebu/
+obj-$(CONFIG_ARCH_MESON)		+= meson/
+obj-$(CONFIG_ARCH_MXS)			+= mxs/
+obj-$(CONFIG_ARCH_LPC18XX)		+= nxp/
+obj-$(CONFIG_MACH_PISTACHIO)		+= pistachio/
+obj-$(CONFIG_COMMON_CLK_PXA)		+= pxa/
+obj-$(CONFIG_COMMON_CLK_QCOM)		+= qcom/
+obj-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip/
+obj-$(CONFIG_COMMON_CLK_SAMSUNG)	+= samsung/
+obj-$(CONFIG_ARCH_SHMOBILE_MULTI)	+= shmobile/
+obj-$(CONFIG_ARCH_SIRF)			+= sirf/
+obj-$(CONFIG_ARCH_SOCFPGA)		+= socfpga/
+obj-$(CONFIG_PLAT_SPEAR)		+= spear/
+obj-$(CONFIG_ARCH_STI)			+= st/
+obj-$(CONFIG_ARCH_SUNXI)		+= sunxi/
+obj-$(CONFIG_ARCH_TEGRA)		+= tegra/
+obj-$(CONFIG_ARCH_OMAP2PLUS)		+= ti/
+obj-$(CONFIG_ARCH_U8500)		+= ux500/
+obj-$(CONFIG_COMMON_CLK_VERSATILE)	+= versatile/
+obj-$(CONFIG_X86)			+= x86/
+obj-$(CONFIG_ARCH_ZX)			+= zte/
+obj-$(CONFIG_ARCH_ZYNQ)			+= zynq/
+obj-$(CONFIG_H8300)		+= h8300/

src/drivers/misc/Makefile

+#
+# Makefile for misc devices that really don't fit anywhere else.
+#
+
+obj-$(CONFIG_IBM_ASM)		+= ibmasm/
+obj-$(CONFIG_AD525X_DPOT)	+= ad525x_dpot.o
+obj-$(CONFIG_AD525X_DPOT_I2C)	+= ad525x_dpot-i2c.o
+obj-$(CONFIG_AD525X_DPOT_SPI)	+= ad525x_dpot-spi.o
+obj-$(CONFIG_INTEL_MID_PTI)	+= pti.o
+obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
+obj-$(CONFIG_ATMEL_TCLIB)	+= atmel_tclib.o
+obj-$(CONFIG_BMP085)		+= bmp085.o
+obj-$(CONFIG_BMP085_I2C)	+= bmp085-i2c.o
+obj-$(CONFIG_BMP085_SPI)	+= bmp085-spi.o
+obj-$(CONFIG_DUMMY_IRQ)		+= dummy-irq.o
+obj-$(CONFIG_ICS932S401)	+= ics932s401.o
+obj-$(CONFIG_LKDTM)		+= lkdtm.o
+obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o
+obj-$(CONFIG_TIFM_7XX1)       	+= tifm_7xx1.o
+obj-$(CONFIG_PHANTOM)		+= phantom.o
+obj-$(CONFIG_QCOM_COINCELL)	+= qcom-coincell.o
+obj-$(CONFIG_SENSORS_BH1780)	+= bh1780gli.o
+obj-$(CONFIG_SENSORS_BH1770)	+= bh1770glc.o
+obj-$(CONFIG_SENSORS_APDS990X)	+= apds990x.o
+obj-$(CONFIG_SGI_IOC4)		+= ioc4.o
+obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
+obj-$(CONFIG_KGDB_TESTS)	+= kgdbts.o
+obj-$(CONFIG_SGI_XP)		+= sgi-xp/
+obj-$(CONFIG_SGI_GRU)		+= sgi-gru/
+obj-$(CONFIG_CS5535_MFGPT)	+= cs5535-mfgpt.o
+obj-$(CONFIG_HP_ILO)		+= hpilo.o
+obj-$(CONFIG_APDS9802ALS)	+= apds9802als.o
+obj-$(CONFIG_ISL29003)		+= isl29003.o
+obj-$(CONFIG_ISL29020)		+= isl29020.o
+obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
+obj-$(CONFIG_DS1682)		+= ds1682.o
+obj-$(CONFIG_TI_DAC7512)	+= ti_dac7512.o
+obj-$(CONFIG_C2PORT)		+= c2port/
+obj-$(CONFIG_HMC6352)		+= hmc6352.o
+obj-y				+= eeprom/
+obj-y				+= cb710/
+obj-$(CONFIG_SPEAR13XX_PCIE_GADGET)	+= spear13xx_pcie_gadget.o
+obj-$(CONFIG_VMWARE_BALLOON)	+= vmw_balloon.o
+obj-$(CONFIG_ARM_CHARLCD)	+= arm-charlcd.o
+obj-$(CONFIG_PCH_PHUB)		+= pch_phub.o
+obj-y				+= ti-st/
+obj-y				+= lis3lv02d/
+obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o
+obj-$(CONFIG_ALTERA_STAPL)	+=altera-stapl/
+obj-$(CONFIG_INTEL_MEI)		+= mei/
+obj-$(CONFIG_VMWARE_VMCI)	+= vmw_vmci/
+obj-$(CONFIG_LATTICE_ECP3_CONFIG)	+= lattice-ecp3-config.o
+obj-$(CONFIG_SRAM)		+= sram.o
+obj-$(CONFIG_XILINX_TRAFGEN)	+= xilinx_trafgen.o
+obj-$(CONFIG_XILINX_JESD204B)	+= jesd204b/
+obj-y				+= mic/
+obj-$(CONFIG_GENWQE)		+= genwqe/
+obj-$(CONFIG_ECHO)		+= echo/
+obj-$(CONFIG_VEXPRESS_SYSCFG)	+= vexpress-syscfg.o
+obj-$(CONFIG_CXL_BASE)		+= cxl/
+obj-$(CONFIG_VSC330X)	        += vsc330x.o
+obj-$(CONFIG_LTC3589)	        += ltc3589.o

src/drivers/misc/ltc3589.c

@@ -6,7 +6,7 @@
  *!
  *!  This program is free software: you can redistribute it and/or modify
  *!  it under the terms of the GNU General Public License as published by
- *!  the Free Software Foundation, either version 2 of the License, or
+ *!  the Free Software Foundation, either version 3 of the License, or
  *!  (at your option) any later version.
  *!
  *!  This program is distributed in the hope that it will be useful,

src/drivers/misc/vsc330x.c

 /*!***************************************************************************
  *! FILE NAME  : vsc330x.c
  *! DESCRIPTION: control of the VSC3304 4x4 crosspoint switch
- *! Copyright (C) 2013-2016 Elphel, Inc.
+ *! Copyright (C) 2013 Elphel, Inc.
  *! -----------------------------------------------------------------------------**
  *!
  *!  This program is free software: you can redistribute it and/or modify
  *!  it under the terms of the GNU General Public License as published by
- *!  the Free Software Foundation, either version 2 of the License, or
+ *!  the Free Software Foundation, either version 3 of the License, or
  *!  (at your option) any later version.
  *!
  *!  This program is distributed in the hope that it will be useful,

src/drivers/mmc/host/sdhci.h

@@ -18,7 +18,7 @@
 #include <linux/types.h>
 #include <linux/io.h>
 
-#include <linux/mmc/sdhci.h>
+#include <linux/mmc/host.h>
 
 /*
  * Controller registers
@@ -310,6 +310,216 @@ struct sdhci_adma2_64_desc {
  */
 #define SDHCI_MAX_SEGS		128
 
+enum sdhci_cookie {
+	COOKIE_UNMAPPED,
+	COOKIE_MAPPED,
+	COOKIE_GIVEN,
+};
+
+struct sdhci_host {
+	/* Data set by hardware interface driver */
+	const char *hw_name;	/* Hardware bus name */
+
+	unsigned int quirks;	/* Deviations from spec. */
+
+/* Controller doesn't honor resets unless we touch the clock register */
+#define SDHCI_QUIRK_CLOCK_BEFORE_RESET			(1<<0)
+/* Controller has bad caps bits, but really supports DMA */
+#define SDHCI_QUIRK_FORCE_DMA				(1<<1)
+/* Controller doesn't like to be reset when there is no card inserted. */
+#define SDHCI_QUIRK_NO_CARD_NO_RESET			(1<<2)
+/* Controller doesn't like clearing the power reg before a change */
+#define SDHCI_QUIRK_SINGLE_POWER_WRITE			(1<<3)
+/* Controller has flaky internal state so reset it on each ios change */
+#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS		(1<<4)
+/* Controller has an unusable DMA engine */
+#define SDHCI_QUIRK_BROKEN_DMA				(1<<5)
+/* Controller has an unusable ADMA engine */
+#define SDHCI_QUIRK_BROKEN_ADMA				(1<<6)
+/* Controller can only DMA from 32-bit aligned addresses */
+#define SDHCI_QUIRK_32BIT_DMA_ADDR			(1<<7)
+/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
+#define SDHCI_QUIRK_32BIT_DMA_SIZE			(1<<8)
+/* Controller can only ADMA chunks that are a multiple of 32 bits */
+#define SDHCI_QUIRK_32BIT_ADMA_SIZE			(1<<9)
+/* Controller needs to be reset after each request to stay stable */
+#define SDHCI_QUIRK_RESET_AFTER_REQUEST			(1<<10)
+/* Controller needs voltage and power writes to happen separately */
+#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER		(1<<11)
+/* Controller provides an incorrect timeout value for transfers */
+#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL			(1<<12)
+/* Controller has an issue with buffer bits for small transfers */
+#define SDHCI_QUIRK_BROKEN_SMALL_PIO			(1<<13)
+/* Controller does not provide transfer-complete interrupt when not busy */
+#define SDHCI_QUIRK_NO_BUSY_IRQ				(1<<14)
+/* Controller has unreliable card detection */
+#define SDHCI_QUIRK_BROKEN_CARD_DETECTION		(1<<15)
+/* Controller reports inverted write-protect state */
+#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT		(1<<16)
+/* Controller does not like fast PIO transfers */
+#define SDHCI_QUIRK_PIO_NEEDS_DELAY			(1<<18)
+/* Controller has to be forced to use block size of 2048 bytes */
+#define SDHCI_QUIRK_FORCE_BLK_SZ_2048			(1<<20)
+/* Controller cannot do multi-block transfers */
+#define SDHCI_QUIRK_NO_MULTIBLOCK			(1<<21)
+/* Controller can only handle 1-bit data transfers */
+#define SDHCI_QUIRK_FORCE_1_BIT_DATA			(1<<22)
+/* Controller needs 10ms delay between applying power and clock */
+#define SDHCI_QUIRK_DELAY_AFTER_POWER			(1<<23)
+/* Controller uses SDCLK instead of TMCLK for data timeouts */
+#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK		(1<<24)
+/* Controller reports wrong base clock capability */
+#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN		(1<<25)
+/* Controller cannot support End Attribute in NOP ADMA descriptor */
+#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC		(1<<26)
+/* Controller is missing device caps. Use caps provided by host */
+#define SDHCI_QUIRK_MISSING_CAPS			(1<<27)
+/* Controller uses Auto CMD12 command to stop the transfer */
+#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12		(1<<28)
+/* Controller doesn't have HISPD bit field in HI-SPEED SD card */
+#define SDHCI_QUIRK_NO_HISPD_BIT			(1<<29)
+/* Controller treats ADMA descriptors with length 0000h incorrectly */
+#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC		(1<<30)
+/* The read-only detection via SDHCI_PRESENT_STATE register is unstable */
+#define SDHCI_QUIRK_UNSTABLE_RO_DETECT			(1<<31)
+
+	unsigned int quirks2;	/* More deviations from spec. */
+
+#define SDHCI_QUIRK2_HOST_OFF_CARD_ON			(1<<0)
+#define SDHCI_QUIRK2_HOST_NO_CMD23			(1<<1)
+/* The system physically doesn't support 1.8v, even if the host does */
+#define SDHCI_QUIRK2_NO_1_8_V				(1<<2)
+#define SDHCI_QUIRK2_PRESET_VALUE_BROKEN		(1<<3)
+#define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON		(1<<4)
+/* Controller has a non-standard host control register */
+#define SDHCI_QUIRK2_BROKEN_HOST_CONTROL		(1<<5)
+/* Controller does not support HS200 */
+#define SDHCI_QUIRK2_BROKEN_HS200			(1<<6)
+/* Controller does not support DDR50 */
+#define SDHCI_QUIRK2_BROKEN_DDR50			(1<<7)
+/* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */
+#define SDHCI_QUIRK2_STOP_WITH_TC			(1<<8)
+/* Controller does not support 64-bit DMA */
+#define SDHCI_QUIRK2_BROKEN_64_BIT_DMA			(1<<9)
+/* need clear transfer mode register before send cmd */
+#define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD	(1<<10)
+/* Capability register bit-63 indicates HS400 support */
+#define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400		(1<<11)
+/* forced tuned clock */
+#define SDHCI_QUIRK2_TUNING_WORK_AROUND			(1<<12)
+/* disable the block count for single block transactions */
+#define SDHCI_QUIRK2_SUPPORT_SINGLE			(1<<13)
+/* Controller broken with using ACMD23 */
+#define SDHCI_QUIRK2_ACMD23_BROKEN			(1<<14)
+/* Broken Clock divider zero in controller */
+#define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN		(1<<15)
+/* Tuning Broken for HS200, SDR50 and SDR104 */
+#define SDHCI_QUIRK2_BROKEN_TUNING			(1<<16)
+/* Broken Clock between 19MHz-25MHz */
+#define SDHCI_QUIRK2_CLOCK_STANDARD_25_BROKEN		(1<<17)
+
+/*
+ * When internal clock is disabled, a delay is needed before modifying the
+ * SD clock frequency or enabling back the internal clock.
+ */
+#define SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST	(1<<16)
+
+	int irq;		/* Device IRQ */
+	void __iomem *ioaddr;	/* Mapped address */
+
+	const struct sdhci_ops *ops;	/* Low level hw interface */
+
+	/* Internal data */
+	struct mmc_host *mmc;	/* MMC structure */
+	u64 dma_mask;		/* custom DMA mask */
+
+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+	struct led_classdev led;	/* LED control */
+	char led_name[32];
+#endif
+
+	spinlock_t lock;	/* Mutex */
+
+	int flags;		/* Host attributes */
+#define SDHCI_USE_SDMA		(1<<0)	/* Host is SDMA capable */
+#define SDHCI_USE_ADMA		(1<<1)	/* Host is ADMA capable */
+#define SDHCI_REQ_USE_DMA	(1<<2)	/* Use DMA for this req. */
+#define SDHCI_DEVICE_DEAD	(1<<3)	/* Device unresponsive */
+#define SDHCI_SDR50_NEEDS_TUNING (1<<4)	/* SDR50 needs tuning */
+#define SDHCI_AUTO_CMD12	(1<<6)	/* Auto CMD12 support */
+#define SDHCI_AUTO_CMD23	(1<<7)	/* Auto CMD23 support */
+#define SDHCI_PV_ENABLED	(1<<8)	/* Preset value enabled */
+#define SDHCI_SDIO_IRQ_ENABLED	(1<<9)	/* SDIO irq enabled */
+#define SDHCI_SDR104_NEEDS_TUNING (1<<10)	/* SDR104/HS200 needs tuning */
+#define SDHCI_USE_64_BIT_DMA	(1<<12)	/* Use 64-bit DMA */
+#define SDHCI_HS400_TUNING	(1<<13)	/* Tuning for HS400 */
+
+	unsigned int version;	/* SDHCI spec. version */
+
+	unsigned int max_clk;	/* Max possible freq (MHz) */
+	unsigned int timeout_clk;	/* Timeout freq (KHz) */
+	unsigned int clk_mul;	/* Clock Muliplier value */
+
+	unsigned int clock;	/* Current clock (MHz) */
+	u8 pwr;			/* Current voltage */
+
+	bool runtime_suspended;	/* Host is runtime suspended */
+	bool bus_on;		/* Bus power prevents runtime suspend */
+	bool preset_enabled;	/* Preset is enabled */
+
+	struct mmc_request *mrq;	/* Current request */
+	struct mmc_command *cmd;	/* Current command */
+	struct mmc_data *data;	/* Current data request */
+	unsigned int data_early:1;	/* Data finished before cmd */
+	unsigned int busy_handle:1;	/* Handling the order of Busy-end */
+
+	struct sg_mapping_iter sg_miter;	/* SG state for PIO */
+	unsigned int blocks;	/* remaining PIO blocks */
+
+	int sg_count;		/* Mapped sg entries */
+
+	void *adma_table;	/* ADMA descriptor table */
+	void *align_buffer;	/* Bounce buffer */
+
+	size_t adma_table_sz;	/* ADMA descriptor table size */
+	size_t align_buffer_sz;	/* Bounce buffer size */
+
+	dma_addr_t adma_addr;	/* Mapped ADMA descr. table */
+	dma_addr_t align_addr;	/* Mapped bounce buffer */
+
+	unsigned int desc_sz;	/* ADMA descriptor size */
+	unsigned int align_sz;	/* ADMA alignment */
+	unsigned int align_mask;	/* ADMA alignment mask */
+
+	struct tasklet_struct finish_tasklet;	/* Tasklet structures */
+
+	struct timer_list timer;	/* Timer for timeouts */
+
+	u32 caps;		/* Alternative CAPABILITY_0 */
+	u32 caps1;		/* Alternative CAPABILITY_1 */
+
+	unsigned int            ocr_avail_sdio;	/* OCR bit masks */
+	unsigned int            ocr_avail_sd;
+	unsigned int            ocr_avail_mmc;
+	u32 ocr_mask;		/* available voltages */
+
+	unsigned		timing;		/* Current timing */
+
+	u32			thread_isr;
+
+	/* cached registers */
+	u32			ier;
+
+	wait_queue_head_t	buf_ready_int;	/* Waitqueue for Buffer Read Ready interrupt */
+	unsigned int		tuning_done;	/* Condition flag set when CMD19 succeeds */
+
+	unsigned int		tuning_count;	/* Timer count for re-tuning */
+	unsigned int		tuning_mode;	/* Re-tuning mode supported by host */
+#define SDHCI_TUNING_MODE_1	0
+
+	unsigned long private[0] ____cacheline_aligned;
+};
+
 struct sdhci_ops {
 #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
 	u32		(*read_l)(struct sdhci_host *host, int reg);
@@ -341,6 +551,11 @@ struct sdhci_ops {
 	void	(*platform_init)(struct sdhci_host *host);
 	void    (*card_event)(struct sdhci_host *host);
 	void	(*voltage_switch)(struct sdhci_host *host);
+	void	(*tune_clk)(struct sdhci_host *host);
+	int	(*select_drive_strength)(struct sdhci_host *host,
+					 struct mmc_card *card,
+					 unsigned int max_dtr, int host_drv,
+					 int card_drv, int *drv_type);
 };
 
 #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS

src/drivers/mtd/nand/pl35x_nand.c

@@ -415,7 +415,8 @@ static int pl35x_nand_read_page_raw(struct mtd_info *mtd,
  */
 static int pl35x_nand_write_page_raw(struct mtd_info *mtd,
 				    struct nand_chip *chip,
-				    const uint8_t *buf, int oob_required)
+				    const uint8_t *buf, int oob_required,
+				    int page)
 {
 	unsigned long data_phase_addr;
 	uint8_t *p;
@@ -450,7 +451,7 @@ static int pl35x_nand_write_page_raw(struct mtd_info *mtd,
  */
 static int pl35x_nand_write_page_hwecc(struct mtd_info *mtd,
 				    struct nand_chip *chip, const uint8_t *buf,
-				    int oob_required)
+				    int oob_required, int page)
 {
 	int i, eccsize = chip->ecc.size;
 	int eccsteps = chip->ecc.steps;
@@ -511,7 +512,7 @@ static int pl35x_nand_write_page_hwecc(struct mtd_info *mtd,
  */
 static int pl35x_nand_write_page_swecc(struct mtd_info *mtd,
 				    struct nand_chip *chip, const uint8_t *buf,
-				    int oob_required)
+				    int oob_required, int page)
 {
 	int i, eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -527,7 +528,7 @@ static int pl35x_nand_write_page_swecc(struct mtd_info *mtd,
 	for (i = 0; i < chip->ecc.total; i++)
 		chip->oob_poi[eccpos[i]] = ecc_calc[i];
 
-	chip->ecc.write_page_raw(mtd, chip, buf, 1);
+	chip->ecc.write_page_raw(mtd, chip, buf, 1, page);
 
 	return 0;
 }
@@ -679,11 +680,6 @@ static void pl35x_nand_select_chip(struct mtd_info *mtd, int chip)
 static void pl35x_nand_cmd_function(struct mtd_info *mtd, unsigned int command,
 				 int column, int page_addr)
 {
-
-	if (command == NAND_CMD_READ0) pr_debug("NAND READ\n");
-	if (command == NAND_CMD_UNLOCK1) pr_debug("NAND UNLOCK1\n");
-	if (command == NAND_CMD_SET_FEATURES) pr_debug("NAND NAND_CMD_SET_FEATURES\n");
-
 	struct nand_chip *chip = mtd->priv;
 	const struct pl35x_nand_command_format *curr_cmd = NULL;
 	struct pl35x_nand_info *xnand =
@@ -855,15 +851,12 @@ static void pl35x_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf,
 	struct nand_chip *chip = mtd->priv;
 	unsigned long *ptr = (unsigned long *)buf;
 
-	pr_debug("pl35x_nand_write_buf: datasize=%d len=%d len>>2=%d\n",sizeof(ptr[0]),len,len>>2);
-
 	len >>= 2;
+
 	for (i = 0; i < len; i++)
 		writel(ptr[i], chip->IO_ADDR_W);
-		//writeb(byte, chip->IO_ADDR_W);
 }
 
-
 /**
  * pl35x_nand_device_ready - Check device ready/busy line
  * @mtd:	Pointer to the mtd_info structure
@@ -879,69 +872,6 @@ static int pl35x_nand_device_ready(struct mtd_info *mtd)
 	return 0;
 }
 
-/**
- * pl35x_nand_onfi_set_features- [REPLACEABLE] set features for ONFI nand
- * @mtd: MTD device structure
- * @chip: nand chip info structure
- * @addr: feature address.
- * @subfeature_param: the subfeature parameters, a four bytes array.
- */
-static int pl35x_nand_onfi_set_features(struct mtd_info *mtd, struct nand_chip *chip,
-			int addr, uint8_t *subfeature_param)
-{
-	int status;
-	int i;
-	uint8_t ondie_ecc_feature;
-
-	if (!chip->onfi_version ||
-	    !(le16_to_cpu(chip->onfi_params.opt_cmd)
-	      & ONFI_OPT_CMD_SET_GET_FEATURES))
-		return -EINVAL;
-
-	if (addr==ONDIE_ECC_FEATURE_ADDR){
-		//keep ondie ecc on;
-		chip->cmdfunc(mtd, NAND_CMD_GET_FEATURES, addr, -1);
-		ondie_ecc_feature = readb(chip->IO_ADDR_R);
-		subfeature_param[0] |= (ondie_ecc_feature&0x08);
-	}
-
-	chip->cmdfunc(mtd, NAND_CMD_SET_FEATURES, addr, -1);
-	for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i)
-		writeb(subfeature_param[i], chip->IO_ADDR_W);
-		//chip->write_byte(mtd, subfeature_param[i]);
-
-	status = chip->waitfunc(mtd, chip);
-	if (status & NAND_STATUS_FAIL)
-		return -EIO;
-	return 0;
-}
-
-/**
- * nand_onfi_get_features- [REPLACEABLE] get features for ONFI nand
- * @mtd: MTD device structure
- * @chip: nand chip info structure
- * @addr: feature address.
- * @subfeature_param: the subfeature parameters, a four bytes array.
- */
-static int pl35x_nand_onfi_get_features(struct mtd_info *mtd, struct nand_chip *chip,
-			int addr, uint8_t *subfeature_param)
-{
-	int i;
-
-	if (!chip->onfi_version ||
-	    !(le16_to_cpu(chip->onfi_params.opt_cmd)
-	      & ONFI_OPT_CMD_SET_GET_FEATURES))
-		return -EINVAL;
-
-	/* clear the sub feature parameters */
-	memset(subfeature_param, 0, ONFI_SUBFEATURE_PARAM_LEN);
-
-	chip->cmdfunc(mtd, NAND_CMD_GET_FEATURES, addr, -1);
-	for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i)
-		*subfeature_param++ = chip->read_byte(mtd);
-	return 0;
-}
-
 /**
  * pl35x_nand_detect_ondie_ecc - Get the flash ondie ecc state
  * @mtd:	Pointer to the mtd_info structure
@@ -1121,9 +1051,6 @@ static int pl35x_nand_probe(struct platform_device *pdev)
 	nand_chip->dev_ready = pl35x_nand_device_ready;
 	nand_chip->select_chip = pl35x_nand_select_chip;
 
-	nand_chip->onfi_set_features = pl35x_nand_onfi_set_features;
-	nand_chip->onfi_get_features = pl35x_nand_onfi_get_features;
-
 	/* If we don't set this delay driver sets 20us by default */
 	nand_chip->chip_delay = 30;
 
@@ -1164,7 +1091,7 @@ static int pl35x_nand_probe(struct platform_device *pdev)
 	//TODO: add Micron chip ID checking
 	mtd->_unlock = nand_unlock;
 	mtd->_lock = nand_lock;
-	
+
 	ppdata.of_node = pdev->dev.of_node;
 
 	mtd_device_parse_register(&xnand->mtd, NULL, &ppdata, NULL, 0);