Commit a5d81564 authored by Oleg Dzhimiev's avatar Oleg Dzhimiev
Browse files

for Yocto 2.1

parent ee474cb0

src/drivers/Kconfig

0 → 100644
+203 −0
Original line number Diff line number Diff line 
menu "Device Drivers"



source "drivers/amba/Kconfig"



source "drivers/base/Kconfig"



source "drivers/bus/Kconfig"



source "drivers/connector/Kconfig"



source "drivers/mtd/Kconfig"



source "drivers/of/Kconfig"



source "drivers/parport/Kconfig"



source "drivers/pnp/Kconfig"



source "drivers/block/Kconfig"



source "drivers/nvme/Kconfig"



# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4



source "drivers/misc/Kconfig"



source "drivers/ide/Kconfig"



source "drivers/scsi/Kconfig"



source "drivers/ata/Kconfig"



source "drivers/md/Kconfig"



source "drivers/target/Kconfig"



source "drivers/message/fusion/Kconfig"



source "drivers/firewire/Kconfig"



source "drivers/macintosh/Kconfig"



source "drivers/net/Kconfig"



source "drivers/isdn/Kconfig"



source "drivers/lightnvm/Kconfig"



# input before char - char/joystick depends on it. As does USB.



source "drivers/input/Kconfig"



source "drivers/char/Kconfig"



source "drivers/i2c/Kconfig"



source "drivers/spi/Kconfig"



source "drivers/spmi/Kconfig"



source "drivers/hsi/Kconfig"



source "drivers/pps/Kconfig"



source "drivers/ptp/Kconfig"



source "drivers/pinctrl/Kconfig"



source "drivers/gpio/Kconfig"



source "drivers/w1/Kconfig"



source "drivers/power/Kconfig"



source "drivers/hwmon/Kconfig"



source "drivers/thermal/Kconfig"



source "drivers/watchdog/Kconfig"



source "drivers/ssb/Kconfig"



source "drivers/bcma/Kconfig"



source "drivers/mfd/Kconfig"



source "drivers/regulator/Kconfig"



source "drivers/media/Kconfig"



source "drivers/video/Kconfig"



source "sound/Kconfig"



source "drivers/hid/Kconfig"



source "drivers/usb/Kconfig"



source "drivers/uwb/Kconfig"



source "drivers/mmc/Kconfig"



source "drivers/memstick/Kconfig"



source "drivers/leds/Kconfig"



source "drivers/accessibility/Kconfig"



source "drivers/infiniband/Kconfig"



source "drivers/edac/Kconfig"



source "drivers/rtc/Kconfig"



source "drivers/dma/Kconfig"



source "drivers/dca/Kconfig"



source "drivers/auxdisplay/Kconfig"



source "drivers/uio/Kconfig"



source "drivers/vfio/Kconfig"



source "drivers/vlynq/Kconfig"



source "drivers/virt/Kconfig"



source "drivers/virtio/Kconfig"



source "drivers/hv/Kconfig"



source "drivers/xen/Kconfig"



source "drivers/staging/Kconfig"



source "drivers/platform/Kconfig"



source "drivers/clk/Kconfig"



source "drivers/hwspinlock/Kconfig"



source "drivers/clocksource/Kconfig"



source "drivers/mailbox/Kconfig"



source "drivers/iommu/Kconfig"



source "drivers/remoteproc/Kconfig"



source "drivers/rpmsg/Kconfig"



source "drivers/soc/Kconfig"



source "drivers/devfreq/Kconfig"



source "drivers/extcon/Kconfig"



source "drivers/memory/Kconfig"



source "drivers/iio/Kconfig"



source "drivers/ntb/Kconfig"



source "drivers/vme/Kconfig"



source "drivers/pwm/Kconfig"



source "drivers/irqchip/Kconfig"



source "drivers/ipack/Kconfig"



source "drivers/reset/Kconfig"



source "drivers/fmc/Kconfig"



source "drivers/phy/Kconfig"



source "drivers/powercap/Kconfig"



source "drivers/mcb/Kconfig"



source "drivers/perf/Kconfig"



source "drivers/ras/Kconfig"



source "drivers/thunderbolt/Kconfig"



source "drivers/android/Kconfig"



source "drivers/nvdimm/Kconfig"



source "drivers/nvmem/Kconfig"



source "drivers/hwtracing/stm/Kconfig"



source "drivers/hwtracing/intel_th/Kconfig"



source "drivers/fpga/Kconfig"



source "drivers/elphel/Kconfig"



endmenu

src/drivers/Makefile

+15 −6
Original line number Diff line number Diff line
@@ -11,7 +11,7 @@ obj-y += bus/ 
obj-$(CONFIG_GENERIC_PHY)	+= phy/



# GPIO must come after pinctrl as gpios may need to mux pins etc

obj-y				+= pinctrl/

obj-$(CONFIG_PINCTRL)		+= pinctrl/

obj-y				+= gpio/

obj-y				+= pwm/

obj-$(CONFIG_PCI)		+= pci/
@@ -63,19 +63,23 @@ obj-$(CONFIG_FB_I810) += video/fbdev/i810/ 
obj-$(CONFIG_FB_INTEL)          += video/fbdev/intelfb/



obj-$(CONFIG_PARPORT)		+= parport/

obj-$(CONFIG_NVM)		+= lightnvm/

obj-y				+= base/ block/ misc/ mfd/ nfc/

obj-$(CONFIG_LIBNVDIMM)		+= nvdimm/

obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf/

obj-$(CONFIG_NUBUS)		+= nubus/

obj-y				+= macintosh/

obj-$(CONFIG_IDE)		+= ide/

obj-$(CONFIG_SCSI)		+= scsi/

obj-y				+= nvme/

obj-$(CONFIG_ATA)		+= ata/

obj-$(CONFIG_TARGET_CORE)	+= target/

obj-$(CONFIG_MTD)		+= mtd/

obj-$(CONFIG_SPI)		+= spi/

obj-$(CONFIG_SPMI)		+= spmi/

obj-y				+= hsi/



# elphel393: moving net/ to the bottom because of driver order conflicts

#obj-y				+= net/

obj-$(CONFIG_ATM)		+= atm/

obj-$(CONFIG_FUSION)		+= message/

obj-y				+= firewire/
@@ -98,7 +102,6 @@ obj-$(CONFIG_USB_GADGET) += usb/ 
obj-$(CONFIG_SERIO)		+= input/serio/

obj-$(CONFIG_GAMEPORT)		+= input/gameport/

obj-$(CONFIG_INPUT)		+= input/

obj-$(CONFIG_I2O)		+= message/

obj-$(CONFIG_RTC_LIB)		+= rtc/

obj-y				+= i2c/ media/

obj-$(CONFIG_PPS)		+= pps/
@@ -161,11 +164,17 @@ obj-$(CONFIG_NTB) += ntb/ 
obj-$(CONFIG_FMC)		+= fmc/

obj-$(CONFIG_POWERCAP)		+= powercap/

obj-$(CONFIG_MCB)		+= mcb/

obj-$(CONFIG_PERF_EVENTS)	+= perf/

obj-$(CONFIG_RAS)		+= ras/

obj-$(CONFIG_THUNDERBOLT)	+= thunderbolt/

obj-$(CONFIG_CORESIGHT)		+= coresight/

obj-$(CONFIG_CORESIGHT)		+= hwtracing/coresight/

obj-y				+= hwtracing/intel_th/

obj-$(CONFIG_STM)		+= hwtracing/stm/

obj-$(CONFIG_ANDROID)		+= android/

obj-$(CONFIG_NVMEM)		+= nvmem/

obj-$(CONFIG_FPGA)		+= fpga/



# elphel393: extra config parameters

obj-$(CONFIG_ELPHEL393)			+= elphel/

obj-$(CONFIG_ELPHELDRVONMICROZED)	+= elphel/

obj-$(CONFIG_ELPHEL393_EXTERNAL)       	+= elphel/

src/drivers/clk/Kconfig

0 → 100644
+210 −0
Original line number Diff line number Diff line 


config CLKDEV_LOOKUP

	bool

	select HAVE_CLK



config HAVE_CLK_PREPARE

	bool



config HAVE_MACH_CLKDEV

	bool



config COMMON_CLK

	bool

	select HAVE_CLK_PREPARE

	select CLKDEV_LOOKUP

	select SRCU

	select RATIONAL

	---help---

	  The common clock framework is a single definition of struct

	  clk, useful across many platforms, as well as an

	  implementation of the clock API in include/linux/clk.h.

	  Architectures utilizing the common struct clk should select

	  this option.



menu "Common Clock Framework"

	depends on COMMON_CLK



config COMMON_CLK_WM831X

	tristate "Clock driver for WM831x/2x PMICs"

	depends on MFD_WM831X

	---help---

          Supports the clocking subsystem of the WM831x/2x series of

	  PMICs from Wolfson Microelectronics.



source "drivers/clk/versatile/Kconfig"



config COMMON_CLK_MAX_GEN

        bool



config COMMON_CLK_MAX77686

	tristate "Clock driver for Maxim 77686 MFD"

	depends on MFD_MAX77686

	select COMMON_CLK_MAX_GEN

	---help---

	  This driver supports Maxim 77686 crystal oscillator clock. 



config COMMON_CLK_MAX77802

	tristate "Clock driver for Maxim 77802 PMIC"

	depends on MFD_MAX77686

	select COMMON_CLK_MAX_GEN

	---help---

	  This driver supports Maxim 77802 crystal oscillator clock.



config COMMON_CLK_RK808

	tristate "Clock driver for RK808"

	depends on MFD_RK808

	---help---

	  This driver supports RK808 crystal oscillator clock. These

	  multi-function devices have two fixed-rate oscillators,

	  clocked at 32KHz each. Clkout1 is always on, Clkout2 can off

	  by control register.



config COMMON_CLK_SCPI

	tristate "Clock driver controlled via SCPI interface"

	depends on ARM_SCPI_PROTOCOL || COMPILE_TEST

	  ---help---

	  This driver provides support for clocks that are controlled

	  by firmware that implements the SCPI interface.



	  This driver uses SCPI Message Protocol to interact with the

	  firmware providing all the clock controls.



config COMMON_CLK_SI5338

	tristate "Support Silicon Laboratories SI5338 Quad Clock Generator"

	depends on I2C

	select REGMAP_I2C

	select RATIONAL

	help

	 Say Y here if you have a SI5338 Quad Clock Generator IC on the I2C bus.

	 To compile this driver as a module, choose M here: the

	 module will be called si5338.



config COMMON_CLK_SI5351

	tristate "Clock driver for SiLabs 5351A/B/C"

	depends on I2C

	select REGMAP_I2C

	select RATIONAL

	---help---

	  This driver supports Silicon Labs 5351A/B/C programmable clock

	  generators.



config COMMON_CLK_SI514

	tristate "Clock driver for SiLabs 514 devices"

	depends on I2C

	depends on OF

	select REGMAP_I2C

	help

	---help---

	  This driver supports the Silicon Labs 514 programmable clock

	  generator.



config COMMON_CLK_SI570

	tristate "Clock driver for SiLabs 570 and compatible devices"

	depends on I2C

	depends on OF

	select REGMAP_I2C

	help

	---help---

	  This driver supports Silicon Labs 570/571/598/599 programmable

	  clock generators.



config COMMON_CLK_CDCE925

	tristate "Clock driver for TI CDCE925 devices"

	depends on I2C

	depends on OF

	select REGMAP_I2C

	help

	---help---

	  This driver supports the TI CDCE925 programmable clock synthesizer.

	  The chip contains two PLLs with spread-spectrum clocking support and

	  five output dividers. The driver only supports the following setup,

	  and uses a fixed setting for the output muxes.

	  Y1 is derived from the input clock

	  Y2 and Y3 derive from PLL1

	  Y4 and Y5 derive from PLL2

	  Given a target output frequency, the driver will set the PLL and

	  divider to best approximate the desired output.



config COMMON_CLK_S2MPS11

	tristate "Clock driver for S2MPS1X/S5M8767 MFD"

	depends on MFD_SEC_CORE

	---help---

	  This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator

	  clock. These multi-function devices have two (S2MPS14) or three

	  (S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each.



config CLK_TWL6040

	tristate "External McPDM functional clock from twl6040"

	depends on TWL6040_CORE

	---help---

	  Enable the external functional clock support on OMAP4+ platforms for

	  McPDM. McPDM module is using the external bit clock on the McPDM bus

	  as functional clock.



config COMMON_CLK_AXI_CLKGEN

	tristate "AXI clkgen driver"

	depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST

	help

	---help---

	  Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx

	  FPGAs. It is commonly used in Analog Devices' reference designs.



config CLK_QORIQ

	bool "Clock driver for Freescale QorIQ platforms"

	depends on (PPC_E500MC || ARM || ARM64 || COMPILE_TEST) && OF

	---help---

	  This adds the clock driver support for Freescale QorIQ platforms

	  using common clock framework.



config COMMON_CLK_XGENE

	bool "Clock driver for APM XGene SoC"

	default y

	depends on ARM64 || COMPILE_TEST

	---help---

	  Sypport for the APM X-Gene SoC reference, PLL, and device clocks.



config COMMON_CLK_KEYSTONE

	tristate "Clock drivers for Keystone based SOCs"

	depends on (ARCH_KEYSTONE || COMPILE_TEST) && OF

	---help---

          Supports clock drivers for Keystone based SOCs. These SOCs have local

	  a power sleep control module that gate the clock to the IPs and PLLs.



config COMMON_CLK_PALMAS

	tristate "Clock driver for TI Palmas devices"

	depends on MFD_PALMAS

	---help---

	  This driver supports TI Palmas devices 32KHz output KG and KG_AUDIO

	  using common clock framework.



config COMMON_CLK_PWM

	tristate "Clock driver for PWMs used as clock outputs"

	depends on PWM

	---help---

	  Adapter driver so that any PWM output can be (mis)used as clock signal

	  at 50% duty cycle.



config COMMON_CLK_PXA

	def_bool COMMON_CLK && ARCH_PXA

	---help---

	  Sypport for the Marvell PXA SoC.



config COMMON_CLK_CDCE706

	tristate "Clock driver for TI CDCE706 clock synthesizer"

	depends on I2C

	select REGMAP_I2C

	select RATIONAL

	---help---

	  This driver supports TI CDCE706 programmable 3-PLL clock synthesizer.



source "drivers/clk/bcm/Kconfig"

source "drivers/clk/hisilicon/Kconfig"

source "drivers/clk/qcom/Kconfig"



endmenu



source "drivers/clk/mvebu/Kconfig"



source "drivers/clk/samsung/Kconfig"

source "drivers/clk/tegra/Kconfig"

src/drivers/clk/Makefile

0 → 100644
+86 −0
Original line number Diff line number Diff line 
# common clock types

obj-$(CONFIG_HAVE_CLK)		+= clk-devres.o

obj-$(CONFIG_CLKDEV_LOOKUP)	+= clkdev.o

obj-$(CONFIG_COMMON_CLK)	+= clk.o

obj-$(CONFIG_COMMON_CLK)	+= clk-divider.o

obj-$(CONFIG_COMMON_CLK)	+= clk-fixed-factor.o

obj-$(CONFIG_COMMON_CLK)	+= clk-fixed-rate.o

obj-$(CONFIG_COMMON_CLK)	+= clk-gate.o

obj-$(CONFIG_COMMON_CLK)	+= clk-multiplier.o

obj-$(CONFIG_COMMON_CLK)	+= clk-mux.o

obj-$(CONFIG_COMMON_CLK)	+= clk-composite.o

obj-$(CONFIG_COMMON_CLK)	+= clk-fractional-divider.o

obj-$(CONFIG_COMMON_CLK)	+= clk-gpio.o

ifeq ($(CONFIG_OF), y)

obj-$(CONFIG_COMMON_CLK)	+= clk-conf.o

endif



# hardware specific clock types

# please keep this section sorted lexicographically by file/directory path name

obj-$(CONFIG_MACH_ASM9260)		+= clk-asm9260.o

obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN)	+= clk-axi-clkgen.o

obj-$(CONFIG_ARCH_AXXIA)		+= clk-axm5516.o

obj-$(CONFIG_COMMON_CLK_CDCE706)	+= clk-cdce706.o

obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o

obj-$(CONFIG_ARCH_EFM32)		+= clk-efm32gg.o

obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o

obj-$(CONFIG_MACH_LOONGSON32)		+= clk-ls1x.o

obj-$(CONFIG_COMMON_CLK_MAX_GEN)	+= clk-max-gen.o

obj-$(CONFIG_COMMON_CLK_MAX77686)	+= clk-max77686.o

obj-$(CONFIG_COMMON_CLK_MAX77802)	+= clk-max77802.o

obj-$(CONFIG_ARCH_MB86S7X)		+= clk-mb86s7x.o

obj-$(CONFIG_ARCH_MOXART)		+= clk-moxart.o

obj-$(CONFIG_ARCH_NOMADIK)		+= clk-nomadik.o

obj-$(CONFIG_ARCH_NSPIRE)		+= clk-nspire.o

obj-$(CONFIG_COMMON_CLK_PALMAS)		+= clk-palmas.o

obj-$(CONFIG_CLK_QORIQ)			+= clk-qoriq.o

obj-$(CONFIG_COMMON_CLK_RK808)		+= clk-rk808.o

obj-$(CONFIG_COMMON_CLK_S2MPS11)	+= clk-s2mps11.o

obj-$(CONFIG_COMMON_CLK_SCPI)           += clk-scpi.o

# elphel393: si5338 driver

obj-$(CONFIG_COMMON_CLK_SI5338)		+= clk-si5338.o

obj-$(CONFIG_COMMON_CLK_SI5351)		+= clk-si5351.o

obj-$(CONFIG_COMMON_CLK_SI514)		+= clk-si514.o

obj-$(CONFIG_COMMON_CLK_SI570)		+= clk-si570.o

obj-$(CONFIG_COMMON_CLK_CDCE925)	+= clk-cdce925.o

obj-$(CONFIG_ARCH_STM32)		+= clk-stm32f4.o

obj-$(CONFIG_CLK_TWL6040)		+= clk-twl6040.o

obj-$(CONFIG_ARCH_U300)			+= clk-u300.o

obj-$(CONFIG_ARCH_VT8500)		+= clk-vt8500.o

obj-$(CONFIG_COMMON_CLK_WM831X)		+= clk-wm831x.o

obj-$(CONFIG_COMMON_CLK_XGENE)		+= clk-xgene.o

obj-$(CONFIG_COMMON_CLK_PWM)		+= clk-pwm.o

obj-$(CONFIG_COMMON_CLK_AT91)		+= at91/

obj-y					+= bcm/

obj-$(CONFIG_ARCH_BERLIN)		+= berlin/

obj-$(CONFIG_ARCH_HISI)			+= hisilicon/

obj-$(CONFIG_ARCH_MXC)			+= imx/

obj-$(CONFIG_MACH_INGENIC)		+= ingenic/

obj-$(CONFIG_COMMON_CLK_KEYSTONE)	+= keystone/

obj-$(CONFIG_ARCH_MEDIATEK)		+= mediatek/

ifeq ($(CONFIG_COMMON_CLK), y)

obj-$(CONFIG_ARCH_MMP)			+= mmp/

endif

obj-$(CONFIG_PLAT_ORION)		+= mvebu/

obj-$(CONFIG_ARCH_MESON)		+= meson/

obj-$(CONFIG_ARCH_MXS)			+= mxs/

obj-$(CONFIG_ARCH_LPC18XX)		+= nxp/

obj-$(CONFIG_MACH_PISTACHIO)		+= pistachio/

obj-$(CONFIG_COMMON_CLK_PXA)		+= pxa/

obj-$(CONFIG_COMMON_CLK_QCOM)		+= qcom/

obj-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip/

obj-$(CONFIG_COMMON_CLK_SAMSUNG)	+= samsung/

obj-$(CONFIG_ARCH_SHMOBILE_MULTI)	+= shmobile/

obj-$(CONFIG_ARCH_SIRF)			+= sirf/

obj-$(CONFIG_ARCH_SOCFPGA)		+= socfpga/

obj-$(CONFIG_PLAT_SPEAR)		+= spear/

obj-$(CONFIG_ARCH_STI)			+= st/

obj-$(CONFIG_ARCH_SUNXI)		+= sunxi/

obj-$(CONFIG_ARCH_TEGRA)		+= tegra/

obj-$(CONFIG_ARCH_OMAP2PLUS)		+= ti/

obj-$(CONFIG_ARCH_U8500)		+= ux500/

obj-$(CONFIG_COMMON_CLK_VERSATILE)	+= versatile/

obj-$(CONFIG_X86)			+= x86/

obj-$(CONFIG_ARCH_ZX)			+= zte/

obj-$(CONFIG_ARCH_ZYNQ)			+= zynq/

obj-$(CONFIG_H8300)		+= h8300/

src/drivers/misc/Kconfig

0 → 100644
+570 −0

File added.

Preview size limit exceeded, changes collapsed.