Remove wxUSE_UNICODE definition from CMakeLists.txt, because this define comes from wxWidgets and should not be made inside kicad
Remove KICAD_GOST option because it is  now useless: the 2 GOST options are now selectable at run time and are:
* specific page layouts (now user definable, and the GOST page layouts are available in template folder)
* notation for multiple parts per package (made in eeschema, preference menu)

the spurious warning about stuff that couldn't be seen when changing
colours.
NOTE that the 'net name' layer is present and configurable but non used 
anywhere!

In particular the new mechanism for handling extended color palettes is in place,
included renaming the ini keys and saving the color name instead of its index; this means better forward compatibility with palette changes.

Since ini keys are changed, colors will be reset

added option to allow zooming around the crosshair instead of the center; can be enabled via options or by holding alt while using the mousewheel

eeschema: make new netlist format (S expr netlist format) the default for Pcbnew netlists in dialog netlist.
Also move netlist_control.* to dialogs/dialog_netlist.*, to be consistent with other file dialogs.

  *  serious code cleanup (remove duplicate code)
  *  shows (option in 3D preference menu) the copper items (tracks, zones...)  in 3D, using 35 microns copper thickness.
      However, because there are a lot more3D data to show (roughly 4 times more), this is slower.

If enable in preference menu, allow the pan with drag mouse with middle button down.
both unlimited and limited pan is allowed.

* make 2 bitmaps more visible.
* fix incorrect screen redraw when rotating a component.
* netlist : the pcbnew advanced format can be now stored (persistant option) in project config.

Code cleaning and other minor fixes.

the match between wxString::Format() or wxString::Printf() format strings
with passed arguments, but does this at runtime, not compile time.
Fix some mismatches.  size_t is a 64 bit type on x86_64 whereas int and
unsigned are 32 bit types.  On 32 bit machines they are all 32 bits so
this error is probably not triggered.

* EDA_DRAW_PANEL completely encapsulated.
* Moved OSX m_overlay member from EDA_DRAW_PANEL to EDA_DRAW_FRAME where
  it is used.
* Doxygen comment warning fixes.

* EDA_DRAW_FRAME completely encapsulated.
* Encapsulate the the low hanging fruit in EDA_DRAW_PANEL.

* Enable replace toolbar button and menu entry.
* Improve find replace logging granularity.
* Fix find and replace dialog control hiding and disabling.
* Minor improvements to the SCH_FIND_REPLACE_DATA object.
* Move find collector list iterator into the collector object.
* Add visibility override flag to EDA_ITEM to temporarily show items that
  are hidden during find and replace.

  * Removed Pcb_Frame argument from BOARD() constructor, since it precludes
    having a BOARD being edited by more than one editor, it was a bad design.
    And this meant removing m_PcbFrame from BOARD.
  * removed BOARD::SetWindowFrame(), and BOARD::m_PcbFrame
  * Removed the global BOARD_DESIGN_SETTINGS which was in class_board.cpp
  * added BOARD_DESIGN_SETTINGS to the BOARD class, a full instance
  * a couple dialogs now only change BOARD_DESIGN_SETTINGS when OK is pressed,
    such as dialog_mask_clearance, dialog_drc, etc.
  * Removed common/pcbcommon.cpp's int g_CurrentVersionPCB = 1 and replaced it
    with build_version.h's #define BOARD_FILE_VERSION, although there may be a
    better place for this constant.
  * Made the public functions in PARAM_CFG_ARRAY be type const.
    void SaveParam(..) const and void ReadParam(..) const
  * PARAM_CFG_BASE now has virtual destructor since we have various way of
    destroying the derived class and boost::ptr_vector must be told about this.
  * Pass const PARAM_CFG_ARRAY& instead of PARAM_CFG_ARRAY so that we can use
    an automatic PARAM_CFG_ARRAY which is on the stack.\
  * PCB_EDIT_FRAME::GetProjectFileParameters() may no longer cache the array,
    since it has to access the current BOARD and the BOARD can change.
    Remember BOARD_DESIGN_SETTINGS are now in the BOARD.
  * Made the m_BoundingBox member private, this was a brutally hard task,
    and indicative of the lack of commitment to accessors and object oriented
    design on the part of KiCad developers.  We must do better.
    Added BOARD::GetBoundingBox, SetBoundingBox(), ComputeBoundingBox().
  * Added PCB_BASE_FRAME::GetBoardBoundingBox() which calls BOARD::ComputeBoundingBox()

* Factor test for auto save file into base frame class.
* Added auto save feature to Eeschema for saving schematics, addresses
  launchpad question 173631.
* Add auto save interval control to Eeschema options dialog.
* Fix problem with subsequent auto saves in last commit.

* Add general purpose user write permission test function to base
  window class.
* Check user write permissions before saving project, schematic and
  library files.
* Remove displaying file dialog every time the project file is saved.
* Display absolute paths for non-root sheet file in title bar.
* Remove redundant command table entry from schematic editor.
* Remove unused variables to fix GCC 4.6 warnings.
* The usual Doxygen comment and coding style policy fixes.

* Move code from function ClearProjectDrawList() into SCH_SCREEN object
  Clear() method.
* Delete eeschema/delsheet.cpp as none of the code in it is ever called.
* Move global spice and net list command line variables into SCH_EDIT_FRAME
  object as priviate members and provide access methods.
* Remove unnecessary header includes from eeschema/sheet.cpp.
* Minor coding policy fixes.

Use UTF-8 encoding only in kicad files. Under Linux, this was already the case. Under Windows, texts with  non ascii characters must be corrected.
This ensure compatibility between platforms.

* Remove base screen methods from draw frame object and correct current
  screen methods in derived objects.
* Move restore old wires function code into schematic screen object.
* Make add junction method use current screen position instead of store
  position.
* Move poly line ghosting function into the delete current segment method
  as that was the only place is was being used.
* Add method to base schematic object of testing if object has a label
  that can be incremented.
* Simplified the schematic hierarchy traversing code.
* PCBNew Doxygen warning fixes.

* Move schematic wire and bus break code into schematic screen object.
* Move schematic test for dangling ends into schematic screen object.
* Remove left over debugging output in schematic screen object.
* Remove unused file eeschema/cleanup.cpp.
* Fix bug in schematic line object hit test algorithm.
* Fix a string concatenation compile error added in r2752.
* Rename class WinEDA_BasicFrame to EDA_BASE_FRAME.
* Rename class WinEDA_DrawFrame to EDA_DRAW_FRAME.
* Rename class WinEDA_DrawPanel to EDA_DRAW_PANEL.

* Encapsulate file name member of base screen object.
* Encapsulate associated screen member of schematic sheet object.
* Create add screen method to schematic sheet object to simplify setting
  the associated screen.
* Move the change file name code in the schematic sheet object to the edit
  sheet method in the schematic editor frame object to eliminate message
  dialogs.
* Improve reference counting in schematic screen object.
* Add helper type definitions for changing schematic object storage to C++
  containers.