- 05 May, 2013 1 commit
-
-
Lorenzo Marcantonio authored
The plan goes like this: - eeschema still uses int in decidegrees - all the other things internally use double in decidegrees (or radians in temporaries) - in pcbnew UI the unit is *still* int in decidegrees The idea is to have better precision everywhere while keeping the user with int i angles. Hopefully, if a fractional angle doesn't come in from the outside, everything should *look* like an integer angle (unless I forgot something and it broke) When the time comes, simply updating the UI for allowing doubles from the user should be enough to get arbitrary angles in pcbnew.
-
- 01 May, 2013 1 commit
-
-
jean-pierre charras authored
* All items shapes are converted to polygons. * Polygons are merged layer by layer (for calculation time reasons,zones are not merged) * for copper layers, vias and pads holes are substracted from polygons (but, for calculation time reasons, not inside zones areas). * the look is better, mainly when displaying the copper thickness * solder and paste layers are now shown in 3D viewer. * the code was seriously cleaned (but still needs to be enhanced). * Note this is a work in progress which needs refinements.
-
- 09 Apr, 2013 1 commit
-
-
Lorenzo Marcantonio authored
More layer classification cleanup
-
- 31 Mar, 2013 1 commit
-
-
Lorenzo Marcantonio authored
Implemented the LAYER_NUM typedef (LAYER was already taken as a class name...) to represent a layer number.
-
- 12 Jan, 2013 1 commit
-
-
Wayne Stambaugh authored
* Improve MSG_PANEL_ITEM to handle message panel information. * Create containers for passing message panel items between objects and the message panel. * Rename EDA_ITEM::DisplayInfo to EDA_ITEM::GetMsgPanelInfo. * Remove all direct manipulation of EDA_DRAW_FRAME from all objects derived from EDA_ITEM.
-
- 16 Apr, 2012 1 commit
-
-
Wayne Stambaugh authored
* Move all convert from user to internal units into base_units.cpp. * Remove internal units parameters from all moved conversion functions. * Revise all source code that calls the moved conversion functions. * Remove internal units from all dialog text control helper classes.
-
- 13 Apr, 2012 1 commit
-
-
Wayne Stambaugh authored
* Move all convert from internal to user units functions into separate file. * Remove internal units parameter from all moved conversion functions. * Revise all source code that calls the moved conversion functions. * Compile these conversion routines separately for the appropriate pcb or schematic internal units. * Move internal units specific status bar update code into the appropriate application for updating the status bar. * Move millimeter user units rounding function to common.cpp.
-
- 12 Feb, 2012 1 commit
-
-
jean-pierre charras authored
Modedit: add dialog to edit footprint body items. Fix also minor issues about footprint body items edition.
-
- 23 Jan, 2012 1 commit
-
-
Dick Hollenbeck authored
-
- 22 Jan, 2012 1 commit
-
-
Dick Hollenbeck authored
-
- 29 Dec, 2011 1 commit
-
-
Wayne Stambaugh authored
* EDA_DRAW_PANEL completely encapsulated. * Moved OSX m_overlay member from EDA_DRAW_PANEL to EDA_DRAW_FRAME where it is used. * Doxygen comment warning fixes.
-
- 22 Dec, 2011 1 commit
-
-
Wayne Stambaugh authored
* EDA_DRAW_FRAME completely encapsulated. * Encapsulate the the low hanging fruit in EDA_DRAW_PANEL.
-
- 16 Dec, 2011 1 commit
-
-
Wayne Stambaugh authored
* EDA_DRAW_FRAME completely encapsulated except for DrawFrame member. * Moved members specific to Pcbnew from EDA_DRAW_FRAME to PCB_BASE_FRAME or PCB_EDIT_FRAME as appropriate. * Replace EDA_TOOLBAR with wxAuiToolBar as EDA_TOOL bar provided no additional functionality and made code less readable. * Remove EDA_TOOLBAR class definition from wxstruct.h and delete file wineda_toolbar.cpp. * Rename tool bar members to something more descriptive since the horizontal and vertical references wont mean anything once the tool bars are movable. * Lots of dead code removal.
-
- 14 Dec, 2011 1 commit
-
-
Dick Hollenbeck authored
-
- 05 Dec, 2011 1 commit
-
-
Dick Hollenbeck authored
* Removed Pcb_Frame argument from BOARD() constructor, since it precludes having a BOARD being edited by more than one editor, it was a bad design. And this meant removing m_PcbFrame from BOARD. * removed BOARD::SetWindowFrame(), and BOARD::m_PcbFrame * Removed the global BOARD_DESIGN_SETTINGS which was in class_board.cpp * added BOARD_DESIGN_SETTINGS to the BOARD class, a full instance * a couple dialogs now only change BOARD_DESIGN_SETTINGS when OK is pressed, such as dialog_mask_clearance, dialog_drc, etc. * Removed common/pcbcommon.cpp's int g_CurrentVersionPCB = 1 and replaced it with build_version.h's #define BOARD_FILE_VERSION, although there may be a better place for this constant. * Made the public functions in PARAM_CFG_ARRAY be type const. void SaveParam(..) const and void ReadParam(..) const * PARAM_CFG_BASE now has virtual destructor since we have various way of destroying the derived class and boost::ptr_vector must be told about this. * Pass const PARAM_CFG_ARRAY& instead of PARAM_CFG_ARRAY so that we can use an automatic PARAM_CFG_ARRAY which is on the stack.\ * PCB_EDIT_FRAME::GetProjectFileParameters() may no longer cache the array, since it has to access the current BOARD and the BOARD can change. Remember BOARD_DESIGN_SETTINGS are now in the BOARD. * Made the m_BoundingBox member private, this was a brutally hard task, and indicative of the lack of commitment to accessors and object oriented design on the part of KiCad developers. We must do better. Added BOARD::GetBoundingBox, SetBoundingBox(), ComputeBoundingBox(). * Added PCB_BASE_FRAME::GetBoardBoundingBox() which calls BOARD::ComputeBoundingBox()
-
- 18 Oct, 2011 1 commit
-
-
jean-pierre charras authored
-
- 23 Sep, 2011 1 commit
-
-
Wayne Stambaugh authored
* All header files used to create the PCB common library now compile as stand alone code. This prevents the need to define them in a specific order to make source code compile properly. It should also now be possible to relocate the source code to build the common PCB library to a separate folder.
-
- 06 Sep, 2011 1 commit
-
-
Wayne Stambaugh authored
-
- 01 Mar, 2011 1 commit
-
-
Wayne Stambaugh authored
* Fix grid select box update bug on context menu. * Fix via size and track width select box update bugs. * Fix layer pair indicator button update bug. * Fix auto track width tool bar control enable bug. * Fix via size and track width select status bug in context menu. * Fix layer select box and layer control widget select bug when current layer is removed. * Add virtual function to notify objects derived from EDA_DRAW_FRAME that the units setting has changed. * Coding policy class naming fixes.
-
- 11 Feb, 2011 1 commit
-
-
Wayne Stambaugh authored
* Rename all member variables and methods that reference the cross hair code in draw panel object from cursor to cross hair to eliminate confusion between the two concepts. * Rename cursor capture call backs in draw panel object to improve code readability. * Create helper class for turning off the cross hair while drawing. * Remove redundant block clear code. * Remove redundant mouse capture call back reset code when end capture call back is called. * Remove unused function definitions in base draw frame object. * Lots of minor coding policy and doxygen comment fixes.
-
- 05 Jan, 2011 1 commit
-
-
jean-pierre charras authored
Pcbnew: Bug fix: arcs in modules outlines (when flipped) were incorrectly saved and read in .brd files. this was due to incorrect macro NORMALIZE_ANGLE (was the same as NORMALIZE_ANGLE_POS), now modified and renamed NORMALIZE_ANGLE_360
-