- 15 May, 2013 1 commit
-
-
- 14 May, 2013 1 commit
-
-
jean-pierre charras authored
Pcbnew: fix bug 1179877, due a bad default copy constructor, after my changes about CPOLYGONS_LIST class. More about CPOLYGONS_LIST work.
-
- 13 May, 2013 1 commit
-
-
Dick Hollenbeck authored
-
- 10 May, 2013 2 commits
-
-
Wayne Stambaugh authored
-
Wayne Stambaugh authored
-
- 09 May, 2013 1 commit
-
-
jean-pierre charras authored
Pcbnew: fix minor bug about plot line width.
-
- 08 May, 2013 2 commits
-
-
Wayne Stambaugh authored
* Fix a bug when full file name and path are passed to FOOTPRINT_INFO:: ReadFootprintFiles() which I created in bug fix lp:593989. * Fix a wxString debug assertion in EDA_APP::InitEDA_Appl() when the KICAD environment variable is defined as an empty string. * Add error dialog when libraries cannot be found in system search path when loading footprint using the select footprint dialog. * Add footprint library name column to the EDA_LIST_DIALOG when selecting footprints from the list. * Allow reading all columns from the selected row in EDA_LIST_DIALOG. * Remove redundant sort from EDA_LIST_DIALOG constructor * Add library name member variable and accessors to FOOTPRINT_INFO. * Make headers translatable for Eeschema select component from list dialog. * Add some helper methods to FPID for identifying the FPID type and validity. * Remove a bunch of trailing whitespace and add missing license comments.
-
jean-pierre charras authored
-
- 07 May, 2013 2 commits
-
-
jean-pierre charras authored
Eechema: fix bug : when saving the schematic project, the lib cache was saved under the current sheet opened, not the root sheet. Pcbnew: clamp default plot line width between 0.02 and 2 mm. the other bug (saving this parameter in internal units instead of mm is not fixed)
-
Lorenzo Marcantonio authored
(explanation: float is implicitly promoted to double anyway, it's only useful for storage; also a fp variable forces conversion of other int in the expression without needing a cast) Typo fixes in some comments 'floatting' -> 'floating' :D
-
- 06 May, 2013 3 commits
-
-
Wayne Stambaugh authored
-
Lorenzo Marcantonio authored
Mass parameters in gerbers can't use scientific notation (altough some software allow it), so the %g format was not correct.
-
jean-pierre charras authored
-
- 05 May, 2013 3 commits
-
-
Lorenzo Marcantonio authored
-
Lorenzo Marcantonio authored
A specctra layer is not a LAYER_NUM, so that's probably why it was difficult to use.
-
Lorenzo Marcantonio authored
The plan goes like this: - eeschema still uses int in decidegrees - all the other things internally use double in decidegrees (or radians in temporaries) - in pcbnew UI the unit is *still* int in decidegrees The idea is to have better precision everywhere while keeping the user with int i angles. Hopefully, if a fractional angle doesn't come in from the outside, everything should *look* like an integer angle (unless I forgot something and it broke) When the time comes, simply updating the UI for allowing doubles from the user should be enough to get arbitrary angles in pcbnew.
-
- 04 May, 2013 1 commit
-
-
Lorenzo Marcantonio authored
-
- 03 May, 2013 2 commits
-
-
jean-pierre charras authored
This is a starting point of some code enhancements relative to polygons in Pcbew and 3D viewer.
-
Felix Morgner authored
Adds "kicad_pcb" to the list of file-extensions for PCBnew in its Info.plist to make Launch Services recognize the file associations. Change 8 bit string to UTF8 so fancy mew in "um" can be shown.
-
- 02 May, 2013 5 commits
-
-
Lorenzo Marcantonio authored
Note: ArcTangente gives a double but *takes* ints, so it's not good to use for nontrivial things
-
jean-pierre charras authored
-
Lorenzo Marcantonio authored
New conversion routines and sin/cos implementation for angles in decidegrees
-
Dick Hollenbeck authored
-
jean-pierre charras authored
* All items shapes are converted to polygons. * Polygons are merged layer by layer (for calculation time reasons,zones are not merged) * for copper layers, vias and pads holes are substracted from polygons (but, for calculation time reasons, not inside zones areas). * the look is better, mainly when displaying the copper thickness * solder and paste layers are now shown in 3D viewer. * the code was seriously cleaned (but still needs to be enhanced). * Note this is a work in progress which needs refinements.
-
- 01 May, 2013 5 commits
-
-
jean-pierre charras authored
* All items shapes are converted to polygons. * Polygons are merged layer by layer (for calculation time reasons,zones are not merged) * for copper layers, vias and pads holes are substracted from polygons (but, for calculation time reasons, not inside zones areas). * the look is better, mainly when displaying the copper thickness * solder and paste layers are now shown in 3D viewer. * the code was seriously cleaned (but still needs to be enhanced). * Note this is a work in progress which needs refinements.
-
Lorenzo Marcantonio authored
- Removed spurious int casts (these are truncated anyway and will break doubles) - Applied the Distance, GetLineLength, EuclideanNorm, DEG2RAD, RAD2DEG ArcTangente and NORMALIZE* functions where possible - ArcTangente now returns double and handles the 0,0 case like atan2, so it's no longer necessary to check for it before calling - Small functions in trigo moved as inline
-
Dick Hollenbeck authored
-
Dick Hollenbeck authored
-
Dick Hollenbeck authored
-
- 30 Apr, 2013 4 commits
-
-
Dick Hollenbeck authored
-
Dick Hollenbeck authored
-
Dr. Thomas Spindler authored
Interior regions on Edge.Cuts are out as keepouts for specctra DSN file and downstream routers. Point to point matching during polygon assembly can have individual thresholds, one for board edge and another for interior polygons. This is more forgiving for sloppy graphical mousers, or those that work without grid snap on. Currently the threshold for board edge is at zero, meaning the board edge has to be precisely defined as a polygon, just as before. But it is easily tunable for experimentation.
-
Lorenzo Marcantonio authored
-
- 29 Apr, 2013 4 commits
-
-
Wayne Stambaugh authored
* Fixed a bug in PCB_EDIT_FRAME::loadFootprints when no footprint libraries are found when attempting to load footprints. * Add a warning to PCB_EDIT_FRAME::loadFootprints to inform the user when a footprint library file cannot be found in any of the standard library search paths. * Changed FOOTPRINT_INFO::m_padCount to unsigned to prevent signed/unsigned comparison compiler warnings. * Put NestedSpace() function in netlist_reader.cpp inside conditional debug build statement to prevent warning in release builds.
-
Felix Morgner authored
-
Felix Morgner authored
This seems to me like the defacto standard for this menu command. * Added a default filename for save as. Currently it's set to "Unnamed file" using _() so its translatable. * Changed the save dialog in PCBnew to use the path of the "original" file as a base for the new file.
-
Dick Hollenbeck authored
-
- 28 Apr, 2013 3 commits
-
-
Felix Morgner authored
-
Wayne Stambaugh authored
* Fix both legacy and s-expression netlist readers when footprints are assigned in the netlist. * Add some helper functions to NETLIST for detecting when footprints are set or not set and when they have been changed while loading the .cmp file. * Rename a few functions to improve their readability.
-
Lorenzo Marcantonio authored
-