Some fixes. Boost 1.41 update

eeschema/class_libentry.cpp

@@ -847,6 +847,7 @@ bool LIB_COMPONENT::LoadFootprints( FILE* file, char* line,
  *  The unit Unit, and the shape Convert are considered.
  *  If Unit == 0, Unit is not used
  *  if Convert == 0 Convert is non used
+ *  Invisible fields are not take in account
  **/
 /**********************************************************************/
 EDA_Rect LIB_COMPONENT::GetBoundaryBox( int Unit, int Convert )
@@ -862,7 +863,11 @@ EDA_Rect LIB_COMPONENT::GetBoundaryBox( int Unit, int Convert )
             && ( ( Convert > 0 ) && ( Convert != item.m_Convert ) ) )
             continue;
 
-        bBox.Merge( item.GetBoundingBox() );
+        if ( ( item.Type() == COMPONENT_FIELD_DRAW_TYPE )
+            && ( ( ( LIB_TEXT& ) item ).m_Attributs & TEXT_NO_VISIBLE) )
+            continue;
+
+    bBox.Merge( item.GetBoundingBox() );
     }
 
     return bBox;

include/boost/config/compiler/borland.hpp

@@ -17,7 +17,7 @@
 #endif
 
 // last known compiler version:
-#if (__BORLANDC__ > 0x610)
+#if (__BORLANDC__ > 0x613)
 //#  if defined(BOOST_ASSERT_CONFIG)
 #     error "Unknown compiler version - please run the configure tests and report the results"
 //#  else
@@ -107,30 +107,29 @@
 #  endif
 #endif
 
-// Borland C++ Builder 2007 December 2007 Update and below:
-//#if (__BORLANDC__ <= 0x593)
-#if (__BORLANDC__ <= 0x610)  // Beman has asked Alisdair for more info
+#if (__BORLANDC__ <= 0x613)  // Beman has asked Alisdair for more info
    // we shouldn't really need this - but too many things choke
    // without it, this needs more investigation:
 #  define BOOST_NO_LIMITS_COMPILE_TIME_CONSTANTS
 #  define BOOST_NO_IS_ABSTRACT
 #  define BOOST_NO_FUNCTION_TYPE_SPECIALIZATIONS
+#  define BOOST_NO_USING_TEMPLATE
+#  define BOOST_SP_NO_SP_CONVERTIBLE
 
 // Temporary workaround
 #define BOOST_MPL_CFG_NO_PREPROCESSED_HEADERS
 #endif
 
 // Borland C++ Builder 2008 and below:
-#if (__BORLANDC__ <= 0x601)
 #  define BOOST_FUNCTION_SCOPE_USING_DECLARATION_BREAKS_ADL
-#  define BOOST_ILLEGAL_CV_REFERENCES
 #  define BOOST_NO_DEPENDENT_NESTED_DERIVATIONS
 #  define BOOST_NO_MEMBER_TEMPLATE_FRIENDS
 #  define BOOST_NO_TWO_PHASE_NAME_LOOKUP
-#  define BOOST_NO_USING_TEMPLATE
 #  define BOOST_NO_USING_DECLARATION_OVERLOADS_FROM_TYPENAME_BASE
 #  define BOOST_NO_NESTED_FRIENDSHIP
 #  define BOOST_NO_TYPENAME_WITH_CTOR
+#if (__BORLANDC__ < 0x600)
+#  define BOOST_ILLEGAL_CV_REFERENCES
 #endif
 
 //
@@ -169,12 +168,14 @@
 #define BOOST_NO_CONSTEXPR
 #define BOOST_NO_DEFAULTED_FUNCTIONS
 #define BOOST_NO_DELETED_FUNCTIONS
+#define BOOST_NO_FUNCTION_TEMPLATE_DEFAULT_ARGS
 #define BOOST_NO_INITIALIZER_LISTS
 #define BOOST_NO_LAMBDAS
 #define BOOST_NO_NULLPTR
 #define BOOST_NO_RAW_LITERALS
 #define BOOST_NO_RVALUE_REFERENCES
 #define BOOST_NO_SCOPED_ENUMS
+#define BOOST_NO_SFINAE_EXPR
 #define BOOST_NO_TEMPLATE_ALIASES
 #define BOOST_NO_UNICODE_LITERALS    // UTF-8 still not supported
 #define BOOST_NO_VARIADIC_TEMPLATES
@@ -235,7 +236,7 @@
 //
 // ABI fixing headers:
 //
-#if __BORLANDC__ < 0x600 // not implemented for version 6 compiler yet
+#if __BORLANDC__ != 0x600 // not implemented for version 6 compiler yet
 #ifndef BOOST_ABI_PREFIX
 #  define BOOST_ABI_PREFIX "boost/config/abi/borland_prefix.hpp"
 #endif

include/boost/config/compiler/codegear.hpp

@@ -20,7 +20,7 @@
 //
 // versions check:
 // last known and checked version is 0x610
-#if (__CODEGEARC__ > 0x610)
+#if (__CODEGEARC__ > 0x613)
 #  if defined(BOOST_ASSERT_CONFIG)
 #     error "Unknown compiler version - please run the configure tests and report the results"
 #  else
@@ -29,7 +29,7 @@
 #endif
 
 // CodeGear C++ Builder 2009
-#if (__CODEGEARC__ <= 0x610)
+#if (__CODEGEARC__ <= 0x613)
 #  define BOOST_FUNCTION_SCOPE_USING_DECLARATION_BREAKS_ADL
 #  define BOOST_NO_DEPENDENT_NESTED_DERIVATIONS
 #  define BOOST_NO_MEMBER_TEMPLATE_FRIENDS
@@ -42,6 +42,7 @@
 #  define BOOST_NO_LIMITS_COMPILE_TIME_CONSTANTS
 #  define BOOST_NO_TYPENAME_WITH_CTOR    // Cannot use typename keyword when making temporaries of a dependant type
 #  define BOOST_NO_NESTED_FRIENDSHIP     // TC1 gives nested classes access rights as any other member
+#  define BOOST_SP_NO_SP_CONVERTIBLE
 
 // Temporary hack, until specific MPL preprocessed headers are generated
 #  define BOOST_MPL_CFG_NO_PREPROCESSED_HEADERS
@@ -80,11 +81,13 @@
 #define BOOST_NO_DEFAULTED_FUNCTIONS
 #define BOOST_NO_DELETED_FUNCTIONS
 #define BOOST_NO_EXTERN_TEMPLATE
+#define BOOST_NO_FUNCTION_TEMPLATE_DEFAULT_ARGS
 #define BOOST_NO_INITIALIZER_LISTS
 #define BOOST_NO_LAMBDAS
 #define BOOST_NO_NULLPTR
 #define BOOST_NO_RAW_LITERALS
 #define BOOST_NO_RVALUE_REFERENCES
+#define BOOST_NO_SFINAE_EXPR
 #define BOOST_NO_STATIC_ASSERT
 #define BOOST_NO_TEMPLATE_ALIASES
 #define BOOST_NO_UNICODE_LITERALS

include/boost/config/compiler/common_edg.hpp

@@ -75,11 +75,13 @@
 #define BOOST_NO_DELETED_FUNCTIONS
 #define BOOST_NO_EXPLICIT_CONVERSION_OPERATORS
 #define BOOST_NO_EXTERN_TEMPLATE
+#define BOOST_NO_FUNCTION_TEMPLATE_DEFAULT_ARGS
 #define BOOST_NO_LAMBDAS
 #define BOOST_NO_NULLPTR
 #define BOOST_NO_RAW_LITERALS
 #define BOOST_NO_RVALUE_REFERENCES
 #define BOOST_NO_SCOPED_ENUMS
+#define BOOST_NO_SFINAE_EXPR
 #define BOOST_NO_STATIC_ASSERT
 #define BOOST_NO_TEMPLATE_ALIASES
 #define BOOST_NO_UNICODE_LITERALS

include/boost/config/compiler/digitalmars.hpp

@@ -75,6 +75,7 @@
 #define BOOST_NO_RAW_LITERALS
 #define BOOST_NO_RVALUE_REFERENCES
 #define BOOST_NO_SCOPED_ENUMS
+#define BOOST_NO_SFINAE_EXPR
 #define BOOST_NO_STATIC_ASSERT
 #define BOOST_NO_TEMPLATE_ALIASES
 #define BOOST_NO_UNICODE_LITERALS

include/boost/config/compiler/gcc.hpp

@@ -64,6 +64,9 @@
 // All problems to gcc-3.x and earlier here:
 //
 #define BOOST_NO_TWO_PHASE_NAME_LOOKUP
+#  ifdef __OPEN64__
+#     define BOOST_NO_IS_ABSTRACT
+#  endif
 #endif
 
 #ifndef __EXCEPTIONS
@@ -104,15 +107,12 @@
 // C++0x features not implemented in any GCC version
 //
 #define BOOST_NO_CONSTEXPR
-#define BOOST_NO_EXPLICIT_CONVERSION_OPERATORS
 #define BOOST_NO_EXTERN_TEMPLATE
 #define BOOST_NO_LAMBDAS
 #define BOOST_NO_NULLPTR
 #define BOOST_NO_RAW_LITERALS
-// scoped enums have a serious bug in 4.4.0, so define BOOST_NO_SCOPED_ENUMS until it
-// gets fixed. See http://gcc.gnu.org/bugzilla/show_bug.cgi?id=38064
-#define BOOST_NO_SCOPED_ENUMS
 #define BOOST_NO_TEMPLATE_ALIASES
+#define BOOST_NO_UNICODE_LITERALS
 
 // C++0x features in 4.3.n and later
 //
@@ -126,6 +126,7 @@
 #  define BOOST_HAS_VARIADIC_TMPL
 #else
 #  define BOOST_NO_DECLTYPE
+#  define BOOST_NO_FUNCTION_TEMPLATE_DEFAULT_ARGS
 #  define BOOST_NO_RVALUE_REFERENCES
 #  define BOOST_NO_STATIC_ASSERT
 
@@ -149,7 +150,24 @@
 #  define BOOST_NO_DELETED_FUNCTIONS
 #  define BOOST_NO_INITIALIZER_LISTS
 #  define BOOST_NO_SCOPED_ENUMS  
-#  define BOOST_NO_UNICODE_LITERALS
+#endif
+
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 4)
+#  define BOOST_NO_SFINAE_EXPR
+#endif
+
+// C++0x features in 4.4.1 and later
+//
+#if (__GNUC__*10000 + __GNUC_MINOR__*100 + __GNUC_PATCHLEVEL__ < 40401) || !defined(__GXX_EXPERIMENTAL_CXX0X__)
+// scoped enums have a serious bug in 4.4.0, so define BOOST_NO_SCOPED_ENUMS before 4.4.1
+// See http://gcc.gnu.org/bugzilla/show_bug.cgi?id=38064
+#  define BOOST_NO_SCOPED_ENUMS
+#endif
+
+// C++0x features in 4.5.n and later
+//
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 5) || !defined(__GXX_EXPERIMENTAL_CXX0X__)
+#  define BOOST_NO_EXPLICIT_CONVERSION_OPERATORS
 #endif
 
 // ConceptGCC compiler:
@@ -172,8 +190,8 @@
 #  error "Compiler not configured - please reconfigure"
 #endif
 //
-// last known and checked version is 4.3 (Pre-release):
-#if (__GNUC__ > 4) || ((__GNUC__ == 4) && (__GNUC_MINOR__ > 3))
+// last known and checked version is 4.4 (Pre-release):
+#if (__GNUC__ > 4) || ((__GNUC__ == 4) && (__GNUC_MINOR__ > 4))
 #  if defined(BOOST_ASSERT_CONFIG)
 #     error "Unknown compiler version - please run the configure tests and report the results"
 #  else

include/boost/config/compiler/hp_acc.hpp

@@ -103,12 +103,14 @@
 #define BOOST_NO_DELETED_FUNCTIONS
 #define BOOST_NO_EXPLICIT_CONVERSION_OPERATORS
 #define BOOST_NO_EXTERN_TEMPLATE
+#define BOOST_NO_FUNCTION_TEMPLATE_DEFAULT_ARGS
 #define BOOST_NO_INITIALIZER_LISTS
 #define BOOST_NO_LAMBDAS
 #define BOOST_NO_NULLPTR
 #define BOOST_NO_RAW_LITERALS
 #define BOOST_NO_RVALUE_REFERENCES
 #define BOOST_NO_SCOPED_ENUMS
+#define BOOST_NO_SFINAE_EXPR
 #define BOOST_NO_STATIC_ASSERT
 #define BOOST_NO_TEMPLATE_ALIASES
 #define BOOST_NO_UNICODE_LITERALS

include/boost/config/compiler/intel.hpp

@@ -99,7 +99,7 @@
 #     define BOOST_FUNCTION_SCOPE_USING_DECLARATION_BREAKS_ADL
 #  endif
 #endif
-#if (defined(__GNUC__) && (__GNUC__ < 4)) || defined(_WIN32) || (BOOST_INTEL_CXX_VERSION <= 1100)
+#if (defined(__GNUC__) && (__GNUC__ < 4)) || defined(_WIN32) || (BOOST_INTEL_CXX_VERSION <= 1110)
 // GCC or VC emulation:
 #define BOOST_NO_TWO_PHASE_NAME_LOOKUP
 #endif
@@ -159,7 +159,7 @@ template<> struct assert_intrinsic_wchar_t<unsigned short> {};
 
 //
 // last known and checked version:
-#if (BOOST_INTEL_CXX_VERSION > 1100)
+#if (BOOST_INTEL_CXX_VERSION > 1110)
 #  if defined(BOOST_ASSERT_CONFIG)
 #     error "Unknown compiler version - please run the configure tests and report the results"
 #  elif defined(_MSC_VER)

include/boost/config/compiler/metrowerks.hpp

@@ -103,11 +103,13 @@
 #define BOOST_NO_DELETED_FUNCTIONS
 #define BOOST_NO_EXPLICIT_CONVERSION_OPERATORS
 #define BOOST_NO_EXTERN_TEMPLATE
+#define BOOST_NO_FUNCTION_TEMPLATE_DEFAULT_ARGS
 #define BOOST_NO_INITIALIZER_LISTS
 #define BOOST_NO_LAMBDAS
 #define BOOST_NO_NULLPTR
 #define BOOST_NO_RAW_LITERALS
 #define BOOST_NO_SCOPED_ENUMS
+#define BOOST_NO_SFINAE_EXPR
 #define BOOST_NO_STATIC_ASSERT
 #define BOOST_NO_TEMPLATE_ALIASES
 #define BOOST_NO_UNICODE_LITERALS

include/boost/config/compiler/mpw.hpp

@@ -51,12 +51,14 @@
 #define BOOST_NO_DELETED_FUNCTIONS
 #define BOOST_NO_EXPLICIT_CONVERSION_OPERATORS
 #define BOOST_NO_EXTERN_TEMPLATE
+#define BOOST_NO_FUNCTION_TEMPLATE_DEFAULT_ARGS
 #define BOOST_NO_INITIALIZER_LISTS
 #define BOOST_NO_LAMBDAS
 #define BOOST_NO_NULLPTR
 #define BOOST_NO_RAW_LITERALS
 #define BOOST_NO_RVALUE_REFERENCES
 #define BOOST_NO_SCOPED_ENUMS
+#define BOOST_NO_SFINAE_EXPR
 #define BOOST_NO_STATIC_ASSERT
 #define BOOST_NO_TEMPLATE_ALIASES
 #define BOOST_NO_UNICODE_LITERALS

include/boost/config/compiler/pgi.hpp

@@ -43,12 +43,14 @@
 #define BOOST_NO_DELETED_FUNCTIONS
 #define BOOST_NO_EXPLICIT_CONVERSION_OPERATORS
 #define BOOST_NO_EXTERN_TEMPLATE
+#define BOOST_NO_FUNCTION_TEMPLATE_DEFAULT_ARGS
 #define BOOST_NO_INITIALIZER_LISTS
 #define BOOST_NO_LAMBDAS
 #define BOOST_NO_NULLPTR
 #define BOOST_NO_RAW_LITERALS
 #define BOOST_NO_RVALUE_REFERENCES
 #define BOOST_NO_SCOPED_ENUMS
+#define BOOST_NO_SFINAE_EXPR
 #define BOOST_NO_STATIC_ASSERT
 #define BOOST_NO_TEMPLATE_ALIASES
 #define BOOST_NO_UNICODE_LITERALS

include/boost/config/compiler/sunpro_cc.hpp

@@ -96,12 +96,14 @@
 #define BOOST_NO_DELETED_FUNCTIONS
 #define BOOST_NO_EXPLICIT_CONVERSION_OPERATORS
 #define BOOST_NO_EXTERN_TEMPLATE
+#define BOOST_NO_FUNCTION_TEMPLATE_DEFAULT_ARGS
 #define BOOST_NO_INITIALIZER_LISTS
 #define BOOST_NO_LAMBDAS
 #define BOOST_NO_NULLPTR
 #define BOOST_NO_RAW_LITERALS
 #define BOOST_NO_RVALUE_REFERENCES
 #define BOOST_NO_SCOPED_ENUMS
+#define BOOST_NO_SFINAE_EXPR
 #define BOOST_NO_STATIC_ASSERT
 #define BOOST_NO_TEMPLATE_ALIASES
 #define BOOST_NO_UNICODE_LITERALS

include/boost/config/compiler/vacpp.hpp

@@ -72,11 +72,13 @@
 #define BOOST_NO_DELETED_FUNCTIONS
 #define BOOST_NO_EXPLICIT_CONVERSION_OPERATORS
 #define BOOST_NO_EXTERN_TEMPLATE
+#define BOOST_NO_FUNCTION_TEMPLATE_DEFAULT_ARGS
 #define BOOST_NO_LAMBDAS
 #define BOOST_NO_NULLPTR
 #define BOOST_NO_RAW_LITERALS
 #define BOOST_NO_RVALUE_REFERENCES
 #define BOOST_NO_SCOPED_ENUMS
+#define BOOST_NO_SFINAE_EXPR
 #define BOOST_NO_STATIC_ASSERT
 #define BOOST_NO_TEMPLATE_ALIASES
 #define BOOST_NO_UNICODE_LITERALS

include/boost/config/compiler/visualc.hpp

@@ -14,6 +14,12 @@
 
 #define BOOST_MSVC _MSC_VER
 
+#if _MSC_FULL_VER > 100000000
+#  define BOOST_MSVC_FULL_VER _MSC_FULL_VER
+#else
+#  define BOOST_MSVC_FULL_VER (_MSC_FULL_VER * 10)
+#endif
+
 // turn off the warnings before we #include anything
 #pragma warning( disable : 4503 ) // warning: decorated name length exceeded
 
@@ -168,10 +174,12 @@
 #define BOOST_NO_DELETED_FUNCTIONS
 #define BOOST_NO_EXPLICIT_CONVERSION_OPERATORS
 #define BOOST_NO_EXTERN_TEMPLATE
+#define BOOST_NO_FUNCTION_TEMPLATE_DEFAULT_ARGS
 #define BOOST_NO_INITIALIZER_LISTS
 #define BOOST_NO_NULLPTR
 #define BOOST_NO_RAW_LITERALS
 #define BOOST_NO_SCOPED_ENUMS
+#define BOOST_NO_SFINAE_EXPR
 #define BOOST_NO_TEMPLATE_ALIASES
 #define BOOST_NO_UNICODE_LITERALS
 #define BOOST_NO_VARIADIC_TEMPLATES

include/boost/config/stdlib/dinkumware.hpp

@@ -55,8 +55,10 @@
 #  define BOOST_HAS_MACRO_USE_FACET
 #  ifndef _CPPLIB_VER
       // Updated Dinkum library defines this, and provides
-      // its own min and max definitions.
-#     define BOOST_NO_STD_MIN_MAX
+      // its own min and max definitions, as does MTA version.
+#     ifndef __MTA__ 
+#        define BOOST_NO_STD_MIN_MAX
+#     endif
 #     define BOOST_NO_MS_INT64_NUMERIC_LIMITS
 #  endif
 #endif

include/boost/detail/endian.hpp

@@ -50,7 +50,7 @@
 # define BOOST_BYTE_ORDER 1234
 #elif defined(__sparc) || defined(__sparc__) \
    || defined(_POWER) || defined(__powerpc__) \
-   || defined(__ppc__) || defined(__hpux) \
+   || defined(__ppc__) || defined(__hpux) || defined(__hppa) \
    || defined(_MIPSEB) || defined(_POWER) \
    || defined(__s390__)
 # define BOOST_BIG_ENDIAN

include/boost/detail/is_incrementable.hpp

@@ -69,11 +69,11 @@ namespace is_incrementable_
 #  pragma warning(disable:4913) // Warning about operator,
 # endif 
 
-  // two check_ overloads help us identify which operator++ was picked
-  char (& check_(tag) )[2];
+  // two check overloads help us identify which operator++ was picked
+  char (& check(tag) )[2];
   
   template <class T>
-  char check_(T const&);
+  char check(T const&);
   
 
   template <class T>
@@ -83,7 +83,7 @@ namespace is_incrementable_
 
       BOOST_STATIC_CONSTANT(
           bool
-        , value = sizeof(is_incrementable_::check_(BOOST_comma(++x,0))) == 1
+        , value = sizeof(is_incrementable_::check(BOOST_comma(++x,0))) == 1
       );
   };
 
@@ -94,7 +94,7 @@ namespace is_incrementable_
 
       BOOST_STATIC_CONSTANT(
           bool
-        , value = sizeof(is_incrementable_::check_(BOOST_comma(x++,0))) == 1
+        , value = sizeof(is_incrementable_::check(BOOST_comma(x++,0))) == 1
       );
   };
 

include/boost/ptr_container/detail/static_move_ptr.hpp

@@ -151,7 +151,7 @@ public:
     deleter_const_reference get_deleter() const { return impl_.second(); }
 private:
     template<typename TT, typename DD>
-    void check_(const static_move_ptr<TT, DD>& ptr)
+    void check(const static_move_ptr<TT, DD>& ptr)
         {
             typedef move_ptrs::is_smart_ptr_convertible<TT, T> convertible;
             BOOST_STATIC_ASSERT(convertible::value);

include/boost/ptr_container/ptr_circular_buffer.hpp

@@ -190,7 +190,7 @@ namespace boost
             {
                 for( ; old_size != size; ++old_size )
                     this->push_back( new BOOST_DEDUCED_TYPENAME 
-                                     boost::remove_pointer<value_type>::type ); 
+                                     boost::remove_pointer<value_type>::type() ); 
             }
 
             BOOST_ASSERT( this->size() == size );
@@ -224,7 +224,7 @@ namespace boost
             {
                 for( ; old_size != size; ++old_size )
                     this->push_front( new BOOST_DEDUCED_TYPENAME 
-                                      boost::remove_pointer<value_type>::type ); 
+                                      boost::remove_pointer<value_type>::type() ); 
             }
 
             BOOST_ASSERT( this->size() == size );

include/boost/ptr_container/ptr_sequence_adapter.hpp

@@ -521,7 +521,7 @@ namespace ptr_container_detail
             {
                 for( ; old_size != size; ++old_size )
                     this->push_back( new BOOST_DEDUCED_TYPENAME 
-                                     boost::remove_pointer<value_type>::type ); 
+                                     boost::remove_pointer<value_type>::type() ); 
             }
 
             BOOST_ASSERT( this->size() == size );
@@ -555,7 +555,7 @@ namespace ptr_container_detail
             {
                 for( ; old_size != size; ++old_size )
                     this->push_front( new BOOST_DEDUCED_TYPENAME 
-                                      boost::remove_pointer<value_type>::type ); 
+                                      boost::remove_pointer<value_type>::type() ); 
             }
 
             BOOST_ASSERT( this->size() == size );

include/boost/type_traits/has_new_operator.hpp

@@ -85,7 +85,7 @@ namespace detail {
             BOOST_STATIC_CONSTANT(unsigned, s1 = sizeof(has_new_operator_impl<T>::template check_sig<T>(0)));
             BOOST_STATIC_CONSTANT(unsigned, s2 = sizeof(has_new_operator_impl<T>::template check_sig2<T>(0)));
         #else
-            #if BOOST_WORKAROUND(_MSC_FULL_VER, >= 140050000)
+            #if BOOST_WORKAROUND(BOOST_MSVC_FULL_VER, >= 140050000)
                 #pragma warning(push)
                 #pragma warning(disable:6334)
             #endif
@@ -93,7 +93,7 @@ namespace detail {
             BOOST_STATIC_CONSTANT(unsigned, s1 = sizeof(check_sig<T>(0)));
             BOOST_STATIC_CONSTANT(unsigned, s2 = sizeof(check_sig2<T>(0)));
 
-            #if BOOST_WORKAROUND(_MSC_FULL_VER, >= 140050000)
+            #if BOOST_WORKAROUND(BOOST_MSVC_FULL_VER, >= 140050000)
                 #pragma warning(pop)
             #endif
         #endif

include/boost/type_traits/intrinsics.hpp

@@ -82,7 +82,7 @@
 #   define BOOST_HAS_TYPE_TRAITS_INTRINSICS
 #endif
 
-#if defined(BOOST_MSVC) && defined(_MSC_FULL_VER) && (_MSC_FULL_VER >=140050215)
+#if defined(BOOST_MSVC) && defined(BOOST_MSVC_FULL_VER) && (BOOST_MSVC_FULL_VER >=140050215)
 #   include <boost/type_traits/is_same.hpp>
 
 #   define BOOST_IS_UNION(T) __is_union(T)

include/boost/type_traits/is_abstract.hpp

@@ -94,12 +94,12 @@ struct is_abstract_imp2
 #ifdef __GNUC__
    BOOST_STATIC_CONSTANT(std::size_t, s1 = sizeof(is_abstract_imp2<T>::template check_sig<T>(0)));
 #else
-#if BOOST_WORKAROUND(_MSC_FULL_VER, >= 140050000)
+#if BOOST_WORKAROUND(BOOST_MSVC_FULL_VER, >= 140050000)
 #pragma warning(push)
 #pragma warning(disable:6334)
 #endif
    BOOST_STATIC_CONSTANT(std::size_t, s1 = sizeof(check_sig<T>(0)));
-#if BOOST_WORKAROUND(_MSC_FULL_VER, >= 140050000)
+#if BOOST_WORKAROUND(BOOST_MSVC_FULL_VER, >= 140050000)
 #pragma warning(pop)
 #endif
 #endif

include/boost/type_traits/is_base_and_derived.hpp

@@ -15,10 +15,10 @@
 #include <boost/type_traits/is_same.hpp>
 #include <boost/type_traits/is_convertible.hpp>
 #include <boost/type_traits/detail/ice_and.hpp>
-#include <boost/type_traits/remove_cv.hpp>
 #include <boost/config.hpp>
 #include <boost/static_assert.hpp>
 #endif
+#include <boost/type_traits/remove_cv.hpp>
 
 // should be the last #include
 #include <boost/type_traits/detail/bool_trait_def.hpp>
@@ -133,7 +133,7 @@ struct bd_helper
 template<typename B, typename D>
 struct is_base_and_derived_impl2
 {
-#if BOOST_WORKAROUND(_MSC_FULL_VER, >= 140050000)
+#if BOOST_WORKAROUND(BOOST_MSVC_FULL_VER, >= 140050000)
 #pragma warning(push)
 #pragma warning(disable:6334)
 #endif
@@ -156,7 +156,7 @@ struct is_base_and_derived_impl2
 
     BOOST_STATIC_CONSTANT(bool, value =
         sizeof(bd_helper<B,D>::check_sig(Host(), 0)) == sizeof(type_traits::yes_type));
-#if BOOST_WORKAROUND(_MSC_FULL_VER, >= 140050000)
+#if BOOST_WORKAROUND(BOOST_MSVC_FULL_VER, >= 140050000)
 #pragma warning(pop)
 #endif
 };
@@ -212,7 +212,7 @@ struct is_base_and_derived_impl
     typedef is_base_and_derived_select<
        ::boost::is_class<B>::value,
        ::boost::is_class<D>::value,
-       ::boost::is_same<B,D>::value> selector;
+       ::boost::is_same<ncvB,ncvD>::value> selector;
     typedef typename selector::template rebind<ncvB,ncvD> binder;
     typedef typename binder::type bound_type;
 
@@ -222,7 +222,10 @@ struct is_base_and_derived_impl
 template <typename B, typename D>
 struct is_base_and_derived_impl
 {
-    BOOST_STATIC_CONSTANT(bool, value = BOOST_IS_BASE_OF(B,D));
+    typedef typename remove_cv<B>::type ncvB;
+    typedef typename remove_cv<D>::type ncvD;
+
+    BOOST_STATIC_CONSTANT(bool, value = (BOOST_IS_BASE_OF(B,D) && ! ::boost::is_same<ncvB,ncvD>::value));
 };
 #endif
 } // namespace detail

include/boost/type_traits/is_base_of.hpp

@@ -11,21 +11,32 @@
 
 #include <boost/type_traits/is_base_and_derived.hpp>
 #include <boost/type_traits/is_same.hpp>
+#include <boost/type_traits/is_class.hpp>
 #include <boost/type_traits/detail/ice_or.hpp>
+#include <boost/type_traits/detail/ice_and.hpp>
 
 // should be the last #include
 #include <boost/type_traits/detail/bool_trait_def.hpp>
 
 namespace boost {
 
+   namespace detail{
+      template <class B, class D>
+      struct is_base_of_imp
+      {
+          typedef typename remove_cv<B>::type ncvB;
+          typedef typename remove_cv<D>::type ncvD;
+          BOOST_STATIC_CONSTANT(bool, value = (::boost::type_traits::ice_or<      
+            (::boost::detail::is_base_and_derived_impl<ncvB,ncvD>::value),
+            (::boost::type_traits::ice_and< ::boost::is_same<ncvB,ncvD>::value, ::boost::is_class<ncvB>::value>::value)>::value));
+      };
+   }
+
 BOOST_TT_AUX_BOOL_TRAIT_DEF2(
       is_base_of
     , Base
     , Derived
-    , (::boost::type_traits::ice_or<      
-         (::boost::detail::is_base_and_derived_impl<Base,Derived>::value),
-         (::boost::is_same<Base,Derived>::value)>::value)
-    )
+    , (::boost::detail::is_base_of_imp<Base, Derived>::value))
 
 #ifndef BOOST_NO_TEMPLATE_PARTIAL_SPECIALIZATION
 BOOST_TT_AUX_BOOL_TRAIT_PARTIAL_SPEC2_2(typename Base,typename Derived,is_base_of,Base&,Derived,false)

include/boost/type_traits/is_convertible.hpp

@@ -256,7 +256,7 @@ struct is_convertible_basic_impl
 #ifdef BOOST_MSVC
 #pragma warning(push)
 #pragma warning(disable:4244)
-#if BOOST_WORKAROUND(_MSC_FULL_VER, >= 140050000)
+#if BOOST_WORKAROUND(BOOST_MSVC_FULL_VER, >= 140050000)
 #pragma warning(disable:6334)
 #endif
 #endif

include/boost/type_traits/is_function.hpp

@@ -65,7 +65,7 @@ struct is_function_impl
 template <typename T>
 struct is_function_impl
 {
-#if BOOST_WORKAROUND(_MSC_FULL_VER, >= 140050000)
+#if BOOST_WORKAROUND(BOOST_MSVC_FULL_VER, >= 140050000)
 #pragma warning(push)
 #pragma warning(disable:6334)
 #endif
@@ -74,7 +74,7 @@ struct is_function_impl
         bool, value = sizeof(::boost::type_traits::is_function_ptr_tester(t))
         == sizeof(::boost::type_traits::yes_type)
         );
-#if BOOST_WORKAROUND(_MSC_FULL_VER, >= 140050000)
+#if BOOST_WORKAROUND(BOOST_MSVC_FULL_VER, >= 140050000)
 #pragma warning(pop)
 #endif
 };

include/boost/type_traits/is_member_function_pointer.hpp

@@ -64,7 +64,7 @@ struct is_mem_fun_pointer_select<false>
 {
     template <typename T> struct result_
     {
-#if BOOST_WORKAROUND(_MSC_FULL_VER, >= 140050000)
+#if BOOST_WORKAROUND(BOOST_MSVC_FULL_VER, >= 140050000)
 #pragma warning(push)
 #pragma warning(disable:6334)
 #endif
@@ -75,7 +75,7 @@ struct is_mem_fun_pointer_select<false>
             bool, value = (
                 1 == sizeof(::boost::type_traits::is_mem_fun_pointer_tester(self_type::make_t))
             ));
-#if BOOST_WORKAROUND(_MSC_FULL_VER, >= 140050000)
+#if BOOST_WORKAROUND(BOOST_MSVC_FULL_VER, >= 140050000)
 #pragma warning(pop)
 #endif
     };

include/boost/type_traits/is_member_pointer.hpp

@@ -50,7 +50,7 @@ BOOST_TT_AUX_BOOL_TRAIT_PARTIAL_SPEC1_2(typename T,typename U,is_member_pointer,
 BOOST_TT_AUX_BOOL_TRAIT_DEF1(is_member_pointer,T,::boost::is_member_function_pointer<T>::value)
 BOOST_TT_AUX_BOOL_TRAIT_PARTIAL_SPEC1_2(typename T,typename U,is_member_pointer,U T::*,true)
 
-#if !BOOST_WORKAROUND(__MWERKS__,<=0x3003)
+#if !BOOST_WORKAROUND(__MWERKS__,<=0x3003) && !BOOST_WORKAROUND(__IBMCPP__, <=600)
 BOOST_TT_AUX_BOOL_TRAIT_PARTIAL_SPEC1_2(typename T,typename U,is_member_pointer,U T::*const,true)
 BOOST_TT_AUX_BOOL_TRAIT_PARTIAL_SPEC1_2(typename T,typename U,is_member_pointer,U T::*volatile,true)
 BOOST_TT_AUX_BOOL_TRAIT_PARTIAL_SPEC1_2(typename T,typename U,is_member_pointer,U T::*const volatile,true)

include/boost/type_traits/is_signed.hpp

@@ -30,7 +30,7 @@ template <class T>
 struct is_signed_helper
 {
    typedef typename remove_cv<T>::type no_cv_t;
-   BOOST_STATIC_CONSTANT(bool, value = (static_cast<no_cv_t>(-1) < 0));
+   BOOST_STATIC_CONSTANT(bool, value = (!(static_cast<no_cv_t>(-1) > 0)));
 };
 
 template <bool integral_type>

include/boost/type_traits/is_virtual_base_of.hpp

@@ -42,14 +42,14 @@ struct is_virtual_base_of_impl<Base, Derived, mpl::true_>
        X();
        X(const X&);
        X& operator=(const X&);
-       ~X();
+       ~X()throw();
     };
     struct Y : public virtual Derived 
     {
        Y();
        Y(const Y&);
        Y& operator=(const Y&);
-       ~Y();
+       ~Y()throw();
     };
 #else
     struct X : Derived, virtual Base 
@@ -57,14 +57,14 @@ struct is_virtual_base_of_impl<Base, Derived, mpl::true_>
        X();
        X(const X&);
        X& operator=(const X&);
-       ~X();
+       ~X()throw();
     };
     struct Y : Derived 
     {
        Y();
        Y(const Y&);
        Y& operator=(const Y&);
-       ~Y();
+       ~Y()throw();
     };
 #endif
     BOOST_STATIC_CONSTANT(bool, value = (sizeof(X)==sizeof(Y)));

include/boost/utility/value_init.hpp

@@ -8,6 +8,7 @@
 // 24 Dec 2007 (Refactored and worked around various compiler bugs) Fernando Cacciola, Niels Dekker
 // 23 May 2008 (Fixed operator= const issue, added initialized_value) Niels Dekker, Fernando Cacciola
 // 21 Ago 2008 (Added swap) Niels Dekker, Fernando Cacciola
+// 20 Feb 2009 (Fixed logical const-ness issues) Niels Dekker, Fernando Cacciola
 //
 #ifndef BOOST_UTILITY_VALUE_INIT_21AGO2002_HPP
 #define BOOST_UTILITY_VALUE_INIT_21AGO2002_HPP
@@ -90,7 +91,12 @@ class value_initialized
       wrapper_address()->wrapper::~wrapper();
     }
 
-    T& data() const
+    T const & data() const
+    {
+      return wrapper_address()->data;
+    }
+
+    T& data()
     {
       return wrapper_address()->data;
     }
@@ -100,12 +106,16 @@ class value_initialized
       ::boost::swap( this->data(), arg.data() );
     }
 
-    operator T&() const { return this->data(); }
+    operator T const &() const { return this->data(); }
+
+    operator T&() { return this->data(); }
 
 } ;
 
 
 
+
+
 template<class T>
 T const& get ( value_initialized<T> const& x )
 {

pcbnew/board_items_to_polygon_shape_transform.cpp

@@ -164,6 +164,50 @@ void DRAWSEGMENT::TransformShapeWithClearanceToPolygon(
     }
 }
 
+/** Function EDGE_MODULE::TransformShapeWithClearanceToPolygon
+ * Convert the track shape to a closed polygon
+ * Used in filling zones calculations
+ * Circles and arcs are approximated by segments
+ * @param aCornerBuffer = a buffer to store the polygon
+ * @param aClearanceValue = the clearance around the pad
+ * @param aCircleToSegmentsCount = the number of segments to approximate a circle
+ * @param aCorrectionFactor = the correction to apply to circles radius to keep
+ * clearance when the circle is approxiamted by segment bigger or equal
+ * to the real clearance value (usually near from 1.0)
+ */
+void EDGE_MODULE::TransformShapeWithClearanceToPolygon(
+    std::vector <CPolyPt>& aCornerBuffer,
+    int                    aClearanceValue,
+    int                    aCircleToSegmentsCount,
+    double                 aCorrectionFactor )
+{
+    switch( m_Shape )
+    {
+    case S_CIRCLE:
+        TransformArcToPolygon( aCornerBuffer, m_Start,         // Circle centre
+                              m_End, 3600,
+                              aCircleToSegmentsCount,
+                              m_Width + (2 * aClearanceValue) );
+        break;
+
+    case S_ARC:
+        TransformArcToPolygon( aCornerBuffer, m_Start,
+                              m_End, m_Angle,
+                              aCircleToSegmentsCount,
+                              m_Width + (2 * aClearanceValue) );
+        break;
+
+    case S_SEGMENT:
+        TransformRoundedEndsSegmentToPolygon(
+            aCornerBuffer, m_Start, m_End,
+            aCircleToSegmentsCount, m_Width + (2 * aClearanceValue) );
+        break;
+
+    default:
+        break;
+    }
+}
+
 
 /** Function TRACK::TransformShapeWithClearanceToPolygon
  * Convert the track shape to a closed polygon

pcbnew/class_edge_mod.cpp

@@ -24,10 +24,10 @@
 EDGE_MODULE::EDGE_MODULE( MODULE* parent ) :
     BOARD_ITEM( parent, TYPE_EDGE_MODULE )
 {
-    m_Width     = 0;
-    m_Shape     = S_SEGMENT;
-    m_Angle     = 0;
-    m_Width     = 120;
+    m_Width = 0;
+    m_Shape = S_SEGMENT;
+    m_Angle = 0;
+    m_Width = 120;
 }
 
 
@@ -54,6 +54,78 @@ void EDGE_MODULE::Copy( EDGE_MODULE* source )
 }
 
 
+/**
+ * Function GetBoundingBox
+ * returns the orthogonal, bounding box of this object for display purposes.
+ * This box should be an enclosing perimeter for visible components of this
+ * object, and the units should be in the pcb or schematic coordinate system.
+ * It is OK to overestimate the size by a few counts.
+ */
+EDA_Rect EDGE_MODULE::GetBoundingBox()
+{
+    EDA_Rect bbox;
+
+    bbox.SetOrigin( m_Start );
+
+    switch( m_Shape )
+    {
+    case S_SEGMENT:
+        bbox.SetEnd( m_End );
+        bbox.Inflate( (m_Width / 2) + 1 );
+        break;
+
+    case S_CIRCLE:
+    {
+        int rayon = (int) hypot( (double) (m_End.x - m_Start.x), (double) (m_End.y - m_Start.y) );
+        bbox.Inflate( rayon + 1 );
+    }
+    break;
+
+    case S_ARC:
+    {
+        int rayon = (int) hypot( (double) (m_End.x - m_Start.x), (double) (m_End.y - m_Start.y) );
+        bbox.Inflate( rayon + 1 );
+    }
+    break;
+
+    case S_POLYGON:
+    {
+        // We must compute true coordinates from m_PolyPoints
+        // which are relative to module position, orientation 0
+
+        std::vector<wxPoint> points = m_PolyPoints;
+        wxPoint p_end = m_Start;
+
+        MODULE* Module = (MODULE*) m_Parent;
+        for( unsigned ii = 0; ii < points.size(); ii++ )
+        {
+            wxPoint& pt = points[ii];
+
+            if( Module )
+            {
+                RotatePoint( &pt.x, &pt.y, Module->m_Orient );
+                pt.x += Module->m_Pos.x;
+                pt.y += Module->m_Pos.y;
+            }
+
+            pt.x += m_Start0.x;
+            pt.y += m_Start0.y;
+            bbox.m_Pos.x = MIN( bbox.m_Pos.x, pt.x );
+            bbox.m_Pos.y = MIN( bbox.m_Pos.y, pt.y );
+            p_end.x   = MAX( p_end.x, pt.x );
+            p_end.y   = MAX( p_end.y, pt.y );
+        }
+
+        bbox.SetEnd(p_end);
+        bbox.Inflate( 1 );
+        break;
+    }
+    }
+
+    return bbox;
+}
+
+
 void EDGE_MODULE::SetDrawCoord()
 {
     MODULE* Module = (MODULE*) m_Parent;
@@ -106,8 +178,8 @@ void EDGE_MODULE::Draw( WinEDA_DrawPanel* panel, wxDC* DC,
     ux0 = m_Start.x - offset.x;
     uy0 = m_Start.y - offset.y;
 
-    dx  = m_End.x - offset.x;
-    dy  = m_End.y - offset.y;
+    dx = m_End.x - offset.x;
+    dy = m_End.y - offset.y;
 
     GRSetDrawMode( DC, draw_mode );
     typeaff = frame->m_DisplayModEdge;
@@ -181,6 +253,7 @@ void EDGE_MODULE::Draw( WinEDA_DrawPanel* panel, wxDC* DC,
         break;
 
     case S_POLYGON:
+
         // We must compute true coordinates from m_PolyPoints
         // which are relative to module position, orientation 0
 
@@ -197,8 +270,8 @@ void EDGE_MODULE::Draw( WinEDA_DrawPanel* panel, wxDC* DC,
                 pt.y += Module->m_Pos.y;
             }
 
-            pt.x   += m_Start0.x - offset.x;
-            pt.y   += m_Start0.y - offset.y;
+            pt.x += m_Start0.x - offset.x;
+            pt.y += m_Start0.y - offset.y;
         }
 
         GRPoly( &panel->m_ClipBox, DC, points.size(), &points[0],
@@ -213,7 +286,8 @@ void EDGE_MODULE::DisplayInfo( WinEDA_DrawFrame* frame )
 {
     wxString msg;
 
-    MODULE* module = (MODULE*) m_Parent;
+    MODULE*  module = (MODULE*) m_Parent;
+
     if( !module )
         return;
 
@@ -277,15 +351,17 @@ bool EDGE_MODULE::Save( FILE* aFile ) const
         ret = fprintf( aFile, "DP %d %d %d %d %d %d %d\n",
                        m_Start0.x, m_Start0.y,
                        m_End0.x, m_End0.y,
-                       (int)m_PolyPoints.size(),
+                       (int) m_PolyPoints.size(),
                        m_Width, m_Layer );
 
-        for( unsigned i=0;  i<m_PolyPoints.size();  ++i )
+        for( unsigned i = 0;  i<m_PolyPoints.size();  ++i )
             fprintf( aFile, "Dl %d %d\n", m_PolyPoints[i].x,
                      m_PolyPoints[i].y );
+
         break;
 
     default:
+
         // future: throw an exception here
 #if defined(DEBUG)
         printf( "EDGE_MODULE::Save(): unexpected m_Shape: %d\n", m_Shape );
@@ -293,7 +369,7 @@ bool EDGE_MODULE::Save( FILE* aFile ) const
         break;
     }
 
-    return (ret > 5);
+    return ret > 5;
 }
 
 
@@ -342,7 +418,7 @@ int EDGE_MODULE::ReadDescr( char* Line, FILE* File,
 
     switch( m_Shape )
     {
-    case  S_ARC:
+    case S_ARC:
         sscanf( Line + 3, "%d %d %d %d %d %d %d",
                 &m_Start0.x, &m_Start0.y,
                 &m_End0.x, &m_End0.y,
@@ -381,7 +457,7 @@ int EDGE_MODULE::ReadDescr( char* Line, FILE* File,
                 int y;
                 sscanf( Buf + 3, "%d %d\n", &x, &y );
 
-                m_PolyPoints.push_back( wxPoint(x,y) );
+                m_PolyPoints.push_back( wxPoint( x, y ) );
 
                 (*LineNum)++;
             }
@@ -412,7 +488,7 @@ int EDGE_MODULE::ReadDescr( char* Line, FILE* File,
     // m_Layer must be >= FIRST_NON_COPPER_LAYER, but because microwave footprints
     // can use the copper layers m_Layer < FIRST_NON_COPPER_LAYER is allowed.
     // @todo: changes use of EDGE_MODULE these footprints and allows only m_Layer >= FIRST_NON_COPPER_LAYER
-    if ( (m_Layer < 0) || (m_Layer > LAST_NON_COPPER_LAYER) )
+    if( (m_Layer < 0) || (m_Layer > LAST_NON_COPPER_LAYER) )
         m_Layer = SILKSCREEN_N_CMP;
     return error;
 }
@@ -426,10 +502,10 @@ int EDGE_MODULE::ReadDescr( char* Line, FILE* File,
  */
 bool EDGE_MODULE::HitTest( const wxPoint& ref_pos )
 {
-    int             uxf, uyf;
-    int             rayon, dist;
-    int             dx, dy, spot_cX, spot_cY;
-    int             ux0, uy0;
+    int uxf, uyf;
+    int rayon, dist;
+    int dx, dy, spot_cX, spot_cY;
+    int ux0, uy0;
 
     ux0 = m_Start.x;
     uy0 = m_Start.y;
@@ -445,14 +521,14 @@ bool EDGE_MODULE::HitTest( const wxPoint& ref_pos )
 
         dx = uxf - ux0;
         dy = uyf - uy0;
-        if( DistanceTest( m_Width/2, dx, dy, spot_cX, spot_cY ) )
+        if( DistanceTest( m_Width / 2, dx, dy, spot_cX, spot_cY ) )
             return true;
         break;
 
     case S_CIRCLE:
         rayon = (int) hypot( (double) (uxf - ux0), (double) (uyf - uy0) );
         dist  = (int) hypot( (double) (ref_pos.x - ux0),
-                             (double) (ref_pos.y - uy0) );
+                            (double) (ref_pos.y - uy0) );
         if( abs( rayon - dist ) <= m_Width )
             return true;
         break;
@@ -460,7 +536,7 @@ bool EDGE_MODULE::HitTest( const wxPoint& ref_pos )
     case S_ARC:
         rayon = (int) hypot( (double) (uxf - ux0), (double) (uyf - uy0) );
         dist  = (int) hypot( (double) (ref_pos.x - ux0),
-                             (double) (ref_pos.y - uy0) );
+                            (double) (ref_pos.y - uy0) );
 
         if( abs( rayon - dist ) > m_Width )
             break;
@@ -501,7 +577,7 @@ void EDGE_MODULE::Show( int nestLevel, std::ostream& os )
 
     // for now, make it look like XML:
     NestedSpace( nestLevel, os ) << '<' << GetClass().Lower().mb_str() <<
-        " type=\"" << CONV_TO_UTF8(shape) << "\">";
+    " type=\"" << CONV_TO_UTF8( shape ) << "\">";
 
     os << " <start" << m_Start0 << "/>";
     os << " <end" << m_End0 << "/>";
@@ -509,4 +585,5 @@ void EDGE_MODULE::Show( int nestLevel, std::ostream& os )
     os << " </" << GetClass().Lower().mb_str() << ">\n";
 }
 
+
 #endif

pcbnew/class_edge_mod.h

@@ -70,6 +70,15 @@ public:
     void    DisplayInfo( WinEDA_DrawFrame* frame );
 
 
+    /**
+     * Function GetBoundingBox
+     * returns the orthogonal, bounding box of this object for display purposes.
+     * This box should be an enclosing perimeter for visible components of this
+     * object, and the units should be in the pcb or schematic coordinate system.
+     * It is OK to overestimate the size by a few counts.
+     */
+    virtual EDA_Rect GetBoundingBox();
+
     /**
      * Function HitTest
      * tests if the given wxPoint is within the bounds of this object.
@@ -89,6 +98,23 @@ public:
         // return wxT( "EDGE" );  ?
     }
 
+    /** Function TransformShapeWithClearanceToPolygon
+     * Convert the track shape to a closed polygon
+     * Used in filling zones calculations
+     * Circles and arcs are approximated by segments
+     * @param aCornerBuffer = a buffer to store the polygon
+     * @param aClearanceValue = the clearance around the pad
+     * @param aCircleToSegmentsCount = the number of segments to approximate a circle
+     * @param aCorrectionFactor = the correction to apply to circles radius to keep
+     * clearance when the circle is approxiamted by segment bigger or equal
+     * to the real clearance value (usually near from 1.0)
+     */
+    void         TransformShapeWithClearanceToPolygon(
+        std::vector <CPolyPt>& aCornerBuffer,
+        int                    aClearanceValue,
+        int
+                               aCircleToSegmentsCount,
+        double                 aCorrectionFactor );
 
 #if defined(DEBUG)
     /**

pcbnew/dialog_edit_module_for_BoardEditor_base.cpp

@@ -137,7 +137,7 @@ DIALOG_MODULE_BOARD_EDITOR_BASE::DIALOG_MODULE_BOARD_EDITOR_BASE( wxWindow* pare
 	
 	sbSizerAutoplace->Add( bSizerMoveOpt, 1, wxEXPAND, 5 );
 	
-	m_PropRightSizer->Add( sbSizerAutoplace, 1, wxEXPAND, 5 );
+	m_PropRightSizer->Add( sbSizerAutoplace, 1, wxEXPAND|wxALL, 5 );
 	
 	wxStaticBoxSizer* sbSizerLocalProperties;
 	sbSizerLocalProperties = new wxStaticBoxSizer( new wxStaticBox( m_PanelProperties, wxID_ANY, _("Masks clearances local values:") ), wxVERTICAL );
@@ -146,7 +146,7 @@ DIALOG_MODULE_BOARD_EDITOR_BASE::DIALOG_MODULE_BOARD_EDITOR_BASE( wxWindow* pare
 	m_staticTextInfo->Wrap( -1 );
 	m_staticTextInfo->SetFont( wxFont( wxNORMAL_FONT->GetPointSize(), 70, 90, 92, false, wxEmptyString ) );
 	
-	sbSizerLocalProperties->Add( m_staticTextInfo, 0, wxALL|wxALIGN_RIGHT, 5 );
+	sbSizerLocalProperties->Add( m_staticTextInfo, 0, wxALL, 5 );
 	
 	wxFlexGridSizer* fgSizerClearances;
 	fgSizerClearances = new wxFlexGridSizer( 3, 3, 0, 0 );
@@ -157,14 +157,14 @@ DIALOG_MODULE_BOARD_EDITOR_BASE::DIALOG_MODULE_BOARD_EDITOR_BASE( wxWindow* pare
 	m_staticTextNetClearance->Wrap( -1 );
 	m_staticTextNetClearance->SetToolTip( _("This is the local net clearance for all pad of this footprint\nIf 0, the Netclass values are used\nThis value can be superseded by a pad local value.") );
 	
-	fgSizerClearances->Add( m_staticTextNetClearance, 0, wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
+	fgSizerClearances->Add( m_staticTextNetClearance, 0, wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
 	
 	m_NetClearanceValueCtrl = new wxTextCtrl( m_PanelProperties, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerClearances->Add( m_NetClearanceValueCtrl, 0, wxALL, 5 );
 	
 	m_NetClearanceUnits = new wxStaticText( m_PanelProperties, wxID_ANY, _("Inch"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_NetClearanceUnits->Wrap( -1 );
-	fgSizerClearances->Add( m_NetClearanceUnits, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
+	fgSizerClearances->Add( m_NetClearanceUnits, 0, wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM|wxRIGHT, 5 );
 	
 	m_staticline1 = new wxStaticLine( m_PanelProperties, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxLI_HORIZONTAL );
 	fgSizerClearances->Add( m_staticline1, 0, wxEXPAND | wxALL, 5 );
@@ -179,44 +179,44 @@ DIALOG_MODULE_BOARD_EDITOR_BASE::DIALOG_MODULE_BOARD_EDITOR_BASE( wxWindow* pare
 	m_MaskClearanceTitle->Wrap( -1 );
 	m_MaskClearanceTitle->SetToolTip( _("This is the local clearance between pads and the solder mask\nfor this footprint\nThis value can be superseded by a pad local value.\nIf 0, the global value is used") );
 	
-	fgSizerClearances->Add( m_MaskClearanceTitle, 0, wxALL|wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL, 5 );
+	fgSizerClearances->Add( m_MaskClearanceTitle, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
 	
 	m_SolderMaskMarginCtrl = new wxTextCtrl( m_PanelProperties, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerClearances->Add( m_SolderMaskMarginCtrl, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
 	
 	m_SolderMaskMarginUnits = new wxStaticText( m_PanelProperties, wxID_ANY, _("Inch"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_SolderMaskMarginUnits->Wrap( -1 );
-	fgSizerClearances->Add( m_SolderMaskMarginUnits, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
+	fgSizerClearances->Add( m_SolderMaskMarginUnits, 0, wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM|wxRIGHT, 5 );
 	
 	m_staticTextSolderPaste = new wxStaticText( m_PanelProperties, wxID_ANY, _("Solder paste clearance:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticTextSolderPaste->Wrap( -1 );
 	m_staticTextSolderPaste->SetToolTip( _("This is the local clearance between pads and the solder paste\nfor this footprint.\nThis value can be superseded by a pad local values.\nThe final clearance value is the sum of this value and the clearance value ratio\nA negative value means a smaller mask size than pad size") );
 	
-	fgSizerClearances->Add( m_staticTextSolderPaste, 0, wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL|wxTOP|wxRIGHT|wxLEFT, 5 );
+	fgSizerClearances->Add( m_staticTextSolderPaste, 0, wxALIGN_CENTER_VERTICAL|wxTOP|wxRIGHT|wxLEFT, 5 );
 	
 	m_SolderPasteMarginCtrl = new wxTextCtrl( m_PanelProperties, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerClearances->Add( m_SolderPasteMarginCtrl, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
 	
 	m_SolderPasteMarginUnits = new wxStaticText( m_PanelProperties, wxID_ANY, _("Inch"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_SolderPasteMarginUnits->Wrap( -1 );
-	fgSizerClearances->Add( m_SolderPasteMarginUnits, 0, wxALIGN_CENTER_VERTICAL|wxTOP|wxRIGHT|wxLEFT, 5 );
+	fgSizerClearances->Add( m_SolderPasteMarginUnits, 0, wxALIGN_CENTER_VERTICAL|wxTOP|wxRIGHT, 5 );
 	
 	m_staticTextRatio = new wxStaticText( m_PanelProperties, wxID_ANY, _("Solder mask ratio clearance:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticTextRatio->Wrap( -1 );
-	m_staticTextRatio->SetToolTip( _("This is the local clearance ratio in per cent between pads and the solder paste\nfor this footprint.\nA value of 10 means the clearance value is 10% of the pad size\nThis value can be superseded by a pad local value.\nThe final clearance value is the sum of this value and the clearance value\nA negative value means a smaller mask size than pad size.") );
+	m_staticTextRatio->SetToolTip( _("This is the local clearance ratio in per cent between pads and the solder paste\nfor this footprint.\nA value of 10 means the clearance value is 10 per cent of the pad size\nThis value can be superseded by a pad local value.\nThe final clearance value is the sum of this value and the clearance value\nA negative value means a smaller mask size than pad size.") );
 	
-	fgSizerClearances->Add( m_staticTextRatio, 0, wxALL|wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL, 5 );
+	fgSizerClearances->Add( m_staticTextRatio, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
 	
 	m_SolderPasteMarginRatioCtrl = new wxTextCtrl( m_PanelProperties, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizerClearances->Add( m_SolderPasteMarginRatioCtrl, 0, wxALIGN_CENTER_VERTICAL|wxALL, 5 );
 	
 	m_SolderPasteRatioMarginUnits = new wxStaticText( m_PanelProperties, wxID_ANY, _("%"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_SolderPasteRatioMarginUnits->Wrap( -1 );
-	fgSizerClearances->Add( m_SolderPasteRatioMarginUnits, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
+	fgSizerClearances->Add( m_SolderPasteRatioMarginUnits, 0, wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM|wxRIGHT, 5 );
 	
 	sbSizerLocalProperties->Add( fgSizerClearances, 1, wxEXPAND, 5 );
 	
-	m_PropRightSizer->Add( sbSizerLocalProperties, 0, wxEXPAND, 5 );
+	m_PropRightSizer->Add( sbSizerLocalProperties, 0, wxEXPAND|wxALL, 5 );
 	
 	m_PanelPropertiesBoxSizer->Add( m_PropRightSizer, 0, 0, 5 );
 	

pcbnew/dialog_edit_module_for_BoardEditor_base.h

@@ -115,7 +115,7 @@ class DIALOG_MODULE_BOARD_EDITOR_BASE : public wxDialog
 	
 	public:
 		wxStaticBoxSizer* m_Sizer3DValues;
-		DIALOG_MODULE_BOARD_EDITOR_BASE( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("Module properties"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( 474,583 ), long style = wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER );
+		DIALOG_MODULE_BOARD_EDITOR_BASE( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("Module properties"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( 474,607 ), long style = wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER );
 		~DIALOG_MODULE_BOARD_EDITOR_BASE();
 	
 };

pcbnew/dialog_edit_module_for_Modedit_base.cpp

@@ -108,7 +108,7 @@ DIALOG_MODULE_MODULE_EDITOR_BASE::DIALOG_MODULE_MODULE_EDITOR_BASE( wxWindow* pa
 	
 	sbSizerAutoplace->Add( bSizerRot180, 1, 0, 5 );
 	
-	m_PropRightSizer->Add( sbSizerAutoplace, 1, wxEXPAND, 5 );
+	m_PropRightSizer->Add( sbSizerAutoplace, 1, wxEXPAND|wxALL, 5 );
 	
 	wxStaticBoxSizer* sbSizer8;
 	sbSizer8 = new wxStaticBoxSizer( new wxStaticBox( m_PanelProperties, wxID_ANY, _("Masks clearances local values:") ), wxVERTICAL );
@@ -117,7 +117,7 @@ DIALOG_MODULE_MODULE_EDITOR_BASE::DIALOG_MODULE_MODULE_EDITOR_BASE( wxWindow* pa
 	m_staticTextInfo->Wrap( -1 );
 	m_staticTextInfo->SetFont( wxFont( wxNORMAL_FONT->GetPointSize(), 70, 90, 92, false, wxEmptyString ) );
 	
-	sbSizer8->Add( m_staticTextInfo, 0, wxALL|wxALIGN_RIGHT, 5 );
+	sbSizer8->Add( m_staticTextInfo, 0, wxALL, 5 );
 	
 	wxFlexGridSizer* fgSizer1;
 	fgSizer1 = new wxFlexGridSizer( 3, 3, 0, 0 );
@@ -126,7 +126,7 @@ DIALOG_MODULE_MODULE_EDITOR_BASE::DIALOG_MODULE_MODULE_EDITOR_BASE( wxWindow* pa
 	
 	m_staticTextNetClearance = new wxStaticText( m_PanelProperties, wxID_ANY, _("All pads nets clearance"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticTextNetClearance->Wrap( -1 );
-	fgSizer1->Add( m_staticTextNetClearance, 0, wxLEFT|wxALIGN_CENTER_VERTICAL|wxALIGN_RIGHT, 5 );
+	fgSizer1->Add( m_staticTextNetClearance, 0, wxLEFT|wxALIGN_CENTER_VERTICAL, 5 );
 	
 	m_NetClearanceValueCtrl = new wxTextCtrl( m_PanelProperties, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizer1->Add( m_NetClearanceValueCtrl, 0, wxALL, 5 );
@@ -148,7 +148,7 @@ DIALOG_MODULE_MODULE_EDITOR_BASE::DIALOG_MODULE_MODULE_EDITOR_BASE( wxWindow* pa
 	m_MaskClearanceTitle->Wrap( -1 );
 	m_MaskClearanceTitle->SetToolTip( _("This is the local clearance between pads and the solder mask\nfor this footprint\nThis value can be superseded by a pad local value.\nIf 0, the global value is used") );
 	
-	fgSizer1->Add( m_MaskClearanceTitle, 0, wxALIGN_CENTER_VERTICAL|wxALIGN_RIGHT|wxLEFT, 5 );
+	fgSizer1->Add( m_MaskClearanceTitle, 0, wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
 	
 	m_SolderMaskMarginCtrl = new wxTextCtrl( m_PanelProperties, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizer1->Add( m_SolderMaskMarginCtrl, 0, wxALL, 5 );
@@ -161,7 +161,7 @@ DIALOG_MODULE_MODULE_EDITOR_BASE::DIALOG_MODULE_MODULE_EDITOR_BASE( wxWindow* pa
 	m_staticTextSolderPaste->Wrap( -1 );
 	m_staticTextSolderPaste->SetToolTip( _("This is the local clearance between pads and the solder paste\nfor this footprint.\nThis value can be superseded by a pad local values.\nThe final clearance value is the sum of this value and the clearance value ratio\nA negative value means a smaller mask size than pad size") );
 	
-	fgSizer1->Add( m_staticTextSolderPaste, 0, wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
+	fgSizer1->Add( m_staticTextSolderPaste, 0, wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
 	
 	m_SolderPasteMarginCtrl = new wxTextCtrl( m_PanelProperties, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizer1->Add( m_SolderPasteMarginCtrl, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
@@ -172,9 +172,9 @@ DIALOG_MODULE_MODULE_EDITOR_BASE::DIALOG_MODULE_MODULE_EDITOR_BASE( wxWindow* pa
 	
 	m_staticTextRatio = new wxStaticText( m_PanelProperties, wxID_ANY, _("Solder mask ratio clearance:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticTextRatio->Wrap( -1 );
-	m_staticTextRatio->SetToolTip( _("This is the local clearance ratio in per cent between pads and the solder paste\nfor this footprint.\nA value of 10 means the clearance value is 10% of the pad size\nThis value can be superseded by a pad local value.\nThe final clearance value is the sum of this value and the clearance value\nA negative value means a smaller mask size than pad size.") );
+	m_staticTextRatio->SetToolTip( _("This is the local clearance ratio in per cent between pads and the solder paste\nfor this footprint.\nA value of 10 means the clearance value is 10 per cent of the pad size\nThis value can be superseded by a pad local value.\nThe final clearance value is the sum of this value and the clearance value\nA negative value means a smaller mask size than pad size.") );
 	
-	fgSizer1->Add( m_staticTextRatio, 0, wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
+	fgSizer1->Add( m_staticTextRatio, 0, wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
 	
 	m_SolderPasteMarginRatioCtrl = new wxTextCtrl( m_PanelProperties, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
 	fgSizer1->Add( m_SolderPasteMarginRatioCtrl, 0, wxALL, 5 );
@@ -185,7 +185,7 @@ DIALOG_MODULE_MODULE_EDITOR_BASE::DIALOG_MODULE_MODULE_EDITOR_BASE( wxWindow* pa
 	
 	sbSizer8->Add( fgSizer1, 1, wxEXPAND, 5 );
 	
-	m_PropRightSizer->Add( sbSizer8, 0, wxEXPAND, 5 );
+	m_PropRightSizer->Add( sbSizer8, 0, wxEXPAND|wxALL, 5 );
 	
 	m_PanelPropertiesBoxSizer->Add( m_PropRightSizer, 0, 0, 5 );
 	

pcbnew/dialog_edit_module_for_Modedit_base.fbp

@@ -699,7 +699,7 @@
                                             </object>
                                             <object class="sizeritem" expanded="1">
                                                 <property name="border">5</property>
-                                                <property name="flag">wxEXPAND</property>
+                                                <property name="flag">wxEXPAND|wxALL</property>
                                                 <property name="proportion">1</property>
                                                 <object class="wxStaticBoxSizer" expanded="1">
                                                     <property name="id">wxID_ANY</property>
@@ -981,7 +981,7 @@
                                             </object>
                                             <object class="sizeritem" expanded="1">
                                                 <property name="border">5</property>
-                                                <property name="flag">wxEXPAND</property>
+                                                <property name="flag">wxEXPAND|wxALL</property>
                                                 <property name="proportion">0</property>
                                                 <object class="wxStaticBoxSizer" expanded="1">
                                                     <property name="id">wxID_ANY</property>
@@ -993,7 +993,7 @@
                                                     <event name="OnUpdateUI"></event>
                                                     <object class="sizeritem" expanded="1">
                                                         <property name="border">5</property>
-                                                        <property name="flag">wxALL|wxALIGN_RIGHT</property>
+                                                        <property name="flag">wxALL</property>
                                                         <property name="proportion">0</property>
                                                         <object class="wxStaticText" expanded="1">
                                                             <property name="bg"></property>
@@ -1060,7 +1060,7 @@
                                                             <property name="vgap">0</property>
                                                             <object class="sizeritem" expanded="1">
                                                                 <property name="border">5</property>
-                                                                <property name="flag">wxLEFT|wxALIGN_CENTER_VERTICAL|wxALIGN_RIGHT</property>
+                                                                <property name="flag">wxLEFT|wxALIGN_CENTER_VERTICAL</property>
                                                                 <property name="proportion">0</property>
                                                                 <object class="wxStaticText" expanded="1">
                                                                     <property name="bg"></property>
@@ -1364,7 +1364,7 @@
                                                             </object>
                                                             <object class="sizeritem" expanded="1">
                                                                 <property name="border">5</property>
-                                                                <property name="flag">wxALIGN_CENTER_VERTICAL|wxALIGN_RIGHT|wxLEFT</property>
+                                                                <property name="flag">wxALIGN_CENTER_VERTICAL|wxLEFT</property>
                                                                 <property name="proportion">0</property>
                                                                 <object class="wxStaticText" expanded="1">
                                                                     <property name="bg"></property>
@@ -1521,7 +1521,7 @@
                                                             </object>
                                                             <object class="sizeritem" expanded="1">
                                                                 <property name="border">5</property>
-                                                                <property name="flag">wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL|wxLEFT</property>
+                                                                <property name="flag">wxALIGN_CENTER_VERTICAL|wxLEFT</property>
                                                                 <property name="proportion">0</property>
                                                                 <object class="wxStaticText" expanded="1">
                                                                     <property name="bg"></property>
@@ -1678,7 +1678,7 @@
                                                             </object>
                                                             <object class="sizeritem" expanded="1">
                                                                 <property name="border">5</property>
-                                                                <property name="flag">wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL|wxLEFT</property>
+                                                                <property name="flag">wxALIGN_CENTER_VERTICAL|wxLEFT</property>
                                                                 <property name="proportion">0</property>
                                                                 <object class="wxStaticText" expanded="1">
                                                                     <property name="bg"></property>
@@ -1697,7 +1697,7 @@
                                                                     <property name="size"></property>
                                                                     <property name="style"></property>
                                                                     <property name="subclass"></property>
-                                                                    <property name="tooltip">This is the local clearance ratio in per cent between pads and the solder paste&#x0A;for this footprint.&#x0A;A value of 10 means the clearance value is 10% of the pad size&#x0A;This value can be superseded by a pad local value.&#x0A;The final clearance value is the sum of this value and the clearance value&#x0A;A negative value means a smaller mask size than pad size.</property>
+                                                                    <property name="tooltip">This is the local clearance ratio in per cent between pads and the solder paste&#x0A;for this footprint.&#x0A;A value of 10 means the clearance value is 10 per cent of the pad size&#x0A;This value can be superseded by a pad local value.&#x0A;The final clearance value is the sum of this value and the clearance value&#x0A;A negative value means a smaller mask size than pad size.</property>
                                                                     <property name="window_extra_style"></property>
                                                                     <property name="window_name"></property>
                                                                     <property name="window_style"></property>

pcbnew/dialog_mask_clearance_base.cpp

@@ -41,42 +41,42 @@ DIALOG_PADS_MASK_CLEARANCE_BASE::DIALOG_PADS_MASK_CLEARANCE_BASE( wxWindow* pare
 	
 	m_MaskClearanceTitle = new wxStaticText( this, wxID_ANY, _("Solder mask clearance:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_MaskClearanceTitle->Wrap( -1 );
-	fgGridSolderMaskSizer->Add( m_MaskClearanceTitle, 0, wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL|wxALL, 5 );
+	m_MaskClearanceTitle->SetToolTip( _("This is the global clearance between pads and the solder mask\nThis value can be superseded by local values for a footprint or a pad.") );
 	
-	m_SolderMaskMarginCtrl = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
-	m_SolderMaskMarginCtrl->SetToolTip( _("This is the global clearance between pads and the solder mask\nThis value can be superseded by local values for a footprint or a pad.") );
+	fgGridSolderMaskSizer->Add( m_MaskClearanceTitle, 0, wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM|wxLEFT, 5 );
 	
+	m_SolderMaskMarginCtrl = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
 	fgGridSolderMaskSizer->Add( m_SolderMaskMarginCtrl, 0, wxEXPAND|wxALL, 5 );
 	
 	m_SolderMaskMarginUnits = new wxStaticText( this, wxID_ANY, _("Inch"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_SolderMaskMarginUnits->Wrap( -1 );
-	fgGridSolderMaskSizer->Add( m_SolderMaskMarginUnits, 0, wxALL, 5 );
+	fgGridSolderMaskSizer->Add( m_SolderMaskMarginUnits, 0, wxTOP|wxBOTTOM|wxRIGHT, 5 );
 	
 	m_staticTextSolderPaste = new wxStaticText( this, wxID_ANY, _("Solder paste clearance:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticTextSolderPaste->Wrap( -1 );
-	fgGridSolderMaskSizer->Add( m_staticTextSolderPaste, 0, wxALL|wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL, 5 );
+	m_staticTextSolderPaste->SetToolTip( _("This is the global clearance between pads and the solder paste\nThis value can be superseded by local values for a footprint or a pad.\nThe final clearance value is the sum of this value and the clearance value ratio") );
 	
-	m_SolderPasteMarginCtrl = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
-	m_SolderPasteMarginCtrl->SetToolTip( _("This is the global clearance between pads and the solder paste\nThis value can be superseded by local values for a footprint or a pad.\nThe final clearance value is the sum of this value and the clearance value ratio") );
+	fgGridSolderMaskSizer->Add( m_staticTextSolderPaste, 0, wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM|wxLEFT, 5 );
 	
+	m_SolderPasteMarginCtrl = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
 	fgGridSolderMaskSizer->Add( m_SolderPasteMarginCtrl, 0, wxALL, 5 );
 	
 	m_SolderPasteMarginUnits = new wxStaticText( this, wxID_ANY, _("Inch"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_SolderPasteMarginUnits->Wrap( -1 );
-	fgGridSolderMaskSizer->Add( m_SolderPasteMarginUnits, 0, wxALL, 5 );
+	fgGridSolderMaskSizer->Add( m_SolderPasteMarginUnits, 0, wxTOP|wxBOTTOM|wxRIGHT, 5 );
 	
 	m_staticTextRatio = new wxStaticText( this, wxID_ANY, _("Solder mask ratio clearance:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticTextRatio->Wrap( -1 );
-	fgGridSolderMaskSizer->Add( m_staticTextRatio, 0, wxALL|wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL, 5 );
+	m_staticTextRatio->SetToolTip( _("This is the global clearance ratio in per cent between pads and the solder paste\nA value of 10 means the clearance value is 10 per cent of the pad size\nThis value can be superseded by local values for a footprint or a pad.\nThe final clearance value is the sum of this value and the clearance value") );
 	
-	m_SolderPasteMarginRatioCtrl = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
-	m_SolderPasteMarginRatioCtrl->SetToolTip( _("This is the global clearance ratio in per cent between pads and the solder paste\nA value of 10 means the clearance value is 10% of the pad size\nThis value can be superseded by local values for a footprint or a pad.\nThe final clearance value is the sum of this value and the clearance value") );
+	fgGridSolderMaskSizer->Add( m_staticTextRatio, 0, wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM|wxLEFT, 5 );
 	
+	m_SolderPasteMarginRatioCtrl = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
 	fgGridSolderMaskSizer->Add( m_SolderPasteMarginRatioCtrl, 0, wxALL, 5 );
 	
 	m_SolderPasteRatioMarginUnits = new wxStaticText( this, wxID_ANY, _("%"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_SolderPasteRatioMarginUnits->Wrap( -1 );
-	fgGridSolderMaskSizer->Add( m_SolderPasteRatioMarginUnits, 0, wxALL, 5 );
+	fgGridSolderMaskSizer->Add( m_SolderPasteRatioMarginUnits, 0, wxTOP|wxBOTTOM|wxRIGHT, 5 );
 	
 	sbMiddleRightSizer->Add( fgGridSolderMaskSizer, 1, wxEXPAND, 5 );
 	

pcbnew/dialog_mask_clearance_base.fbp

@@ -214,7 +214,7 @@
                                         <property name="vgap">0</property>
                                         <object class="sizeritem" expanded="1">
                                             <property name="border">5</property>
-                                            <property name="flag">wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL|wxALL</property>
+                                            <property name="flag">wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM|wxLEFT</property>
                                             <property name="proportion">0</property>
                                             <object class="wxStaticText" expanded="1">
                                                 <property name="bg"></property>
@@ -233,7 +233,7 @@
                                                 <property name="size"></property>
                                                 <property name="style"></property>
                                                 <property name="subclass"></property>
-                                                <property name="tooltip"></property>
+                                                <property name="tooltip">This is the global clearance between pads and the solder mask&#x0A;This value can be superseded by local values for a footprint or a pad.</property>
                                                 <property name="window_extra_style"></property>
                                                 <property name="window_name"></property>
                                                 <property name="window_style"></property>
@@ -284,7 +284,7 @@
                                                 <property name="size"></property>
                                                 <property name="style"></property>
                                                 <property name="subclass"></property>
-                                                <property name="tooltip">This is the global clearance between pads and the solder mask&#x0A;This value can be superseded by local values for a footprint or a pad.</property>
+                                                <property name="tooltip"></property>
                                                 <property name="value"></property>
                                                 <property name="window_extra_style"></property>
                                                 <property name="window_name"></property>
@@ -320,7 +320,7 @@
                                         </object>
                                         <object class="sizeritem" expanded="1">
                                             <property name="border">5</property>
-                                            <property name="flag">wxALL</property>
+                                            <property name="flag">wxTOP|wxBOTTOM|wxRIGHT</property>
                                             <property name="proportion">0</property>
                                             <object class="wxStaticText" expanded="1">
                                                 <property name="bg"></property>
@@ -371,7 +371,7 @@
                                         </object>
                                         <object class="sizeritem" expanded="1">
                                             <property name="border">5</property>
-                                            <property name="flag">wxALL|wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL</property>
+                                            <property name="flag">wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM|wxLEFT</property>
                                             <property name="proportion">0</property>
                                             <object class="wxStaticText" expanded="1">
                                                 <property name="bg"></property>
@@ -390,7 +390,7 @@
                                                 <property name="size"></property>
                                                 <property name="style"></property>
                                                 <property name="subclass"></property>
-                                                <property name="tooltip"></property>
+                                                <property name="tooltip">This is the global clearance between pads and the solder paste&#x0A;This value can be superseded by local values for a footprint or a pad.&#x0A;The final clearance value is the sum of this value and the clearance value ratio</property>
                                                 <property name="window_extra_style"></property>
                                                 <property name="window_name"></property>
                                                 <property name="window_style"></property>
@@ -441,7 +441,7 @@
                                                 <property name="size"></property>
                                                 <property name="style"></property>
                                                 <property name="subclass"></property>
-                                                <property name="tooltip">This is the global clearance between pads and the solder paste&#x0A;This value can be superseded by local values for a footprint or a pad.&#x0A;The final clearance value is the sum of this value and the clearance value ratio</property>
+                                                <property name="tooltip"></property>
                                                 <property name="value"></property>
                                                 <property name="window_extra_style"></property>
                                                 <property name="window_name"></property>
@@ -477,7 +477,7 @@
                                         </object>
                                         <object class="sizeritem" expanded="1">
                                             <property name="border">5</property>
-                                            <property name="flag">wxALL</property>
+                                            <property name="flag">wxTOP|wxBOTTOM|wxRIGHT</property>
                                             <property name="proportion">0</property>
                                             <object class="wxStaticText" expanded="1">
                                                 <property name="bg"></property>
@@ -528,7 +528,7 @@
                                         </object>
                                         <object class="sizeritem" expanded="1">
                                             <property name="border">5</property>
-                                            <property name="flag">wxALL|wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL</property>
+                                            <property name="flag">wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM|wxLEFT</property>
                                             <property name="proportion">0</property>
                                             <object class="wxStaticText" expanded="1">
                                                 <property name="bg"></property>
@@ -547,7 +547,7 @@
                                                 <property name="size"></property>
                                                 <property name="style"></property>
                                                 <property name="subclass"></property>
-                                                <property name="tooltip"></property>
+                                                <property name="tooltip">This is the global clearance ratio in per cent between pads and the solder paste&#x0A;A value of 10 means the clearance value is 10 per cent of the pad size&#x0A;This value can be superseded by local values for a footprint or a pad.&#x0A;The final clearance value is the sum of this value and the clearance value</property>
                                                 <property name="window_extra_style"></property>
                                                 <property name="window_name"></property>
                                                 <property name="window_style"></property>
@@ -598,7 +598,7 @@
                                                 <property name="size"></property>
                                                 <property name="style"></property>
                                                 <property name="subclass"></property>
-                                                <property name="tooltip">This is the global clearance ratio in per cent between pads and the solder paste&#x0A;A value of 10 means the clearance value is 10% of the pad size&#x0A;This value can be superseded by local values for a footprint or a pad.&#x0A;The final clearance value is the sum of this value and the clearance value</property>
+                                                <property name="tooltip"></property>
                                                 <property name="value"></property>
                                                 <property name="window_extra_style"></property>
                                                 <property name="window_name"></property>
@@ -634,7 +634,7 @@
                                         </object>
                                         <object class="sizeritem" expanded="1">
                                             <property name="border">5</property>
-                                            <property name="flag">wxALL</property>
+                                            <property name="flag">wxTOP|wxBOTTOM|wxRIGHT</property>
                                             <property name="proportion">0</property>
                                             <object class="wxStaticText" expanded="1">
                                                 <property name="bg"></property>

pcbnew/dialog_pad_properties_base.cpp

@@ -284,7 +284,7 @@ DIALOG_PAD_PROPERTIES_BASE::DIALOG_PAD_PROPERTIES_BASE( wxWindow* parent, wxWind
 	
 	m_staticTextRatio = new wxStaticText( this, wxID_ANY, _("Solder mask ratio clearance:"), wxDefaultPosition, wxDefaultSize, 0 );
 	m_staticTextRatio->Wrap( -1 );
-	m_staticTextRatio->SetToolTip( _("This is the local clearance ratio in per cent between this pad and the solder paste.\nA value of 10 means the clearance value is 10% of the pad size\nIf 0 the footprint value or the global value is used..\nThe final clearance value is the sum of this value and the clearance value\nA negative value means a smaller mask size than pad size.") );
+	m_staticTextRatio->SetToolTip( _("This is the local clearance ratio in per cent between this pad and the solder paste.\nA value of 10 means the clearance value is 10 per cent of the pad size\nIf 0 the footprint value or the global value is used..\nThe final clearance value is the sum of this value and the clearance value\nA negative value means a smaller mask size than pad size.") );
 	
 	fgClearancesGridSizer->Add( m_staticTextRatio, 0, wxLEFT|wxALIGN_CENTER_VERTICAL|wxALIGN_RIGHT, 5 );
 	

pcbnew/dialog_pad_properties_base.fbp

@@ -3231,7 +3231,7 @@
                                                         <property name="size"></property>
                                                         <property name="style"></property>
                                                         <property name="subclass"></property>
-                                                        <property name="tooltip">This is the local clearance ratio in per cent between this pad and the solder paste.&#x0A;A value of 10 means the clearance value is 10% of the pad size&#x0A;If 0 the footprint value or the global value is used..&#x0A;The final clearance value is the sum of this value and the clearance value&#x0A;A negative value means a smaller mask size than pad size.</property>
+                                                        <property name="tooltip">This is the local clearance ratio in per cent between this pad and the solder paste.&#x0A;A value of 10 means the clearance value is 10 per cent of the pad size&#x0A;If 0 the footprint value or the global value is used..&#x0A;The final clearance value is the sum of this value and the clearance value&#x0A;A negative value means a smaller mask size than pad size.</property>
                                                         <property name="window_extra_style"></property>
                                                         <property name="window_name"></property>
                                                         <property name="window_style"></property>

pcbnew/tool_modedit.cpp

@@ -200,7 +200,7 @@ void WinEDA_ModuleEditFrame::ReCreateOptToolbar()
 
     m_OptionsToolBar->AddTool( ID_TB_OPTIONS_SHOW_GRID, wxEmptyString,
                                 wxBitmap( grid_xpm ),
-                               _( "Display Grid OFF" ), wxITEM_CHECK );
+                               _( "Hide grid" ), wxITEM_CHECK );
     m_OptionsToolBar->ToggleTool( ID_TB_OPTIONS_SHOW_GRID, m_Draw_Grid );
 
     m_OptionsToolBar->AddTool( ID_TB_OPTIONS_SHOW_POLAR_COORD, wxEmptyString,
@@ -217,22 +217,22 @@ void WinEDA_ModuleEditFrame::ReCreateOptToolbar()
 
     m_OptionsToolBar->AddTool( ID_TB_OPTIONS_SELECT_CURSOR, wxEmptyString,
                                wxBitmap( cursor_shape_xpm ),
-                               _( "Change Cursor Shape" ) );
+                               _( "Change Cursor Shape" ), wxITEM_CHECK  );
 
     m_OptionsToolBar->AddSeparator();
     m_OptionsToolBar->AddTool( ID_TB_OPTIONS_SHOW_PADS_SKETCH, wxEmptyString,
                                wxBitmap( pad_sketch_xpm ),
-                               _( "Show Pads Sketch" ) );
+                               _( "Show Pads Sketch" ), wxITEM_CHECK  );
 
     m_OptionsToolBar->AddTool( ID_TB_OPTIONS_SHOW_MODULE_TEXT_SKETCH,
                                wxEmptyString,
                                wxBitmap( text_sketch_xpm ),
-                               _( "Show Texts Sketch" ) );
+                               _( "Show Texts Sketch" ), wxITEM_CHECK  );
 
     m_OptionsToolBar->AddTool( ID_TB_OPTIONS_SHOW_MODULE_EDGE_SKETCH,
                                wxEmptyString,
                                wxBitmap( show_mod_edge_xpm ),
-                               _( "Show Edges Sketch" ) );
+                               _( "Show Edges Sketch" ), wxITEM_CHECK  );
 
     m_OptionsToolBar->Realize();
 

pcbnew/tool_pcb.cpp

@@ -296,8 +296,6 @@ void WinEDA_PcbFrame::ReCreateHToolbar()
     // the changes
 
     m_HToolBar->Realize();
-
-    D( printf( "ReCreateHToolbar\n" ); )
     SetToolbars();
 }
 
@@ -400,8 +398,6 @@ void WinEDA_PcbFrame::ReCreateOptToolbar()
 #endif
 
     m_OptionsToolBar->Realize();
-
-    D(printf("ReCreateOptToolbar\n");)
     SetToolbars();
 }
 

pcbnew/zones_convert_brd_items_to_polygons.cpp

@@ -254,6 +254,8 @@ void ZONE_CONTAINER::AddClearanceAreasPolygonsToPolysList( BOARD* aPcb )
         }
     }
 
+    have_poly_to_substract = false;
+
     /* Add holes (i.e. tracks and pads areas as polygons outlines)
      * in GroupB in Bool_Engine
      * Next : Add tracks and vias
@@ -274,15 +276,35 @@ void ZONE_CONTAINER::AddClearanceAreasPolygonsToPolysList( BOARD* aPcb )
         }
     }
 
+    static std::vector <CPolyPt> cornerBuffer;
+    cornerBuffer.clear();
+    /* Add module edge items that are on copper layers
+     * Pcbnew allows these items to be on copper layers in microwvae applictions
+     * This is a bad thing, but must be handle here, until a better way is found
+     */
+    for( MODULE* module = aPcb->m_Modules;  module;  module = module->Next() )
+    {
+        for( BOARD_ITEM* item = module->m_Drawings;  item;  item = item->Next() )
+        {
+            if( !item->IsOnLayer( GetLayer() ) )
+                continue;
+            if( item->Type( ) != TYPE_EDGE_MODULE)
+                continue;
+            item_boundingbox = item->GetBoundingBox();
+            if( item_boundingbox.Intersects( zone_boundingbox ) )
+            {
+                (( EDGE_MODULE* )item)->TransformShapeWithClearanceToPolygon(
+                cornerBuffer, m_ZoneClearance,
+                s_CircleToSegmentsCount, s_Correction );
+            }
+        }
+    }
     // Add graphic items (copper texts) and board edges
     for( BOARD_ITEM* item = aPcb->m_Drawings;  item;  item = item->Next() )
     {
         if( item->GetLayer() != GetLayer() && item->GetLayer() != EDGE_N )
             continue;
 
-        static std::vector <CPolyPt> cornerBuffer;
-        cornerBuffer.clear();
-
         switch( item->Type() )
         {
         case TYPE_DRAWSEGMENT:
@@ -306,40 +328,38 @@ void ZONE_CONTAINER::AddClearanceAreasPolygonsToPolysList( BOARD* aPcb )
             break;
         }
 
-        if( cornerBuffer.size() == 0 )
-            continue;
+    }
 
-        // cornerBuffer can contain more than one polygon,
-        // so read cornerBuffer and verify if there is a end of polygon corner:
-        for( unsigned icnt = 0; icnt < cornerBuffer.size(); )
+    // cornerBuffer contains more than one polygon,
+    // so read cornerBuffer and verify if there is a end of polygon corner:
+    for( unsigned icnt = 0; icnt < cornerBuffer.size(); )
+    {
+        booleng->StartPolygonAdd( GROUP_B );
         {
-            booleng->StartPolygonAdd( GROUP_B );
+            have_poly_to_substract = true;
+            unsigned ii;
+            for( ii = icnt; ii < cornerBuffer.size(); ii++ )
             {
-                have_poly_to_substract = true;
-                unsigned ii;
-                for( ii = icnt; ii < cornerBuffer.size(); ii++ )
-                {
-                    booleng->AddPoint( cornerBuffer[ii].x, cornerBuffer[ii].y );
-                    if( cornerBuffer[ii].end_contour )
-                        break;
-                }
+                booleng->AddPoint( cornerBuffer[ii].x, cornerBuffer[ii].y );
+                if( cornerBuffer[ii].end_contour )
+                    break;
+            }
 
-                booleng->EndPolygonAdd();
+            booleng->EndPolygonAdd();
 
-            #ifdef CREATE_KBOOL_KEY_FILES_FIRST_PASS
-                StartKeyFilePolygon( 1 );
-                for( ii = icnt; ii < cornerBuffer.size(); ii++ )
-                {
-                    AddKeyFilePointXY( cornerBuffer[ii].x, cornerBuffer[ii].y );
-                    if( cornerBuffer[ii].end_contour )
-                        break;
-                }
+        #ifdef CREATE_KBOOL_KEY_FILES_FIRST_PASS
+            StartKeyFilePolygon( 1 );
+            for( ii = icnt; ii < cornerBuffer.size(); ii++ )
+            {
+                AddKeyFilePointXY( cornerBuffer[ii].x, cornerBuffer[ii].y );
+                if( cornerBuffer[ii].end_contour )
+                    break;
+            }
 
-                EndKeyFilePolygon();
-            #endif
+            EndKeyFilePolygon();
+        #endif
 
-                icnt = ii + 1;
-            }
+            icnt = ii + 1;
         }
     }