Commit 001d0838 authored by Andrey Filippov's avatar Andrey Filippov

Created partial kernel with monochrome (LWIR) sensors

parent 0d69b27b
......@@ -208,13 +208,22 @@ public class Aberration_Calibration extends PlugInFrame implements ActionListene
public static EyesisAberrations.OTFFilterParameters OTF_FILTER = new EyesisAberrations.OTFFilterParameters(
0.008, // deconvInvert - when FFT component is less than this fraction of the maximal value, replace 1/z with Z
2.0, // zerofreqSize - used for filtering oversampling artifacts - size of zero freq maximum (if absent on simulated model PS)
2.5, // smoothPS - smooth model PS for rejecting aliases (0 - no smooth, >0 additional Gauss before FFT smaller than normal by this ratio)
0.002, // deconvInvert - when FFT component is less than this fraction of the maximal value, replace 1/z with Z
1.0, // zerofreqSize - used for filtering oversampling artifacts - size of zero freq maximum (if absent on simulated model PS)
1.25, // smoothPS - smooth model PS for rejecting aliases (0 - no smooth, >0 additional Gauss before FFT smaller than normal by this ratio)
0.02, // thresholdHigh -used for filtering oversampling artifacts - relative to max PS value to make filter completely rejecting
0.002 // thresholdLow - used for filtering oversampling artifacts - relative to max PS to make filter completely transmissive
);
public static EyesisAberrations.OTFFilterParameters OTF_FILTER_LWIR = new EyesisAberrations.OTFFilterParameters(
0.01, // deconvInvert - when FFT component is less than this fraction of the maximal value, replace 1/z with Z
1.0, // zerofreqSize - used for filtering oversampling artifacts - size of zero freq maximum (if absent on simulated model PS)
1.25, // smoothPS - smooth model PS for rejecting aliases (0 - no smooth, >0 additional Gauss before FFT smaller than normal by this ratio)
0.2, // thresholdHigh -used for filtering oversampling artifacts - relative to max PS value to make filter completely rejecting
0.05 // thresholdLow - used for filtering oversampling artifacts - relative to max PS to make filter completely transmissive
);
public static MatchSimulatedPattern.PatternDetectParameters PATTERN_DETECT = new MatchSimulatedPattern.PatternDetectParameters (
0.4, // GAUSS_WIDTH= 0.4; //0 - use Hamming window - initWindowFunction()
0.2, // corrGamma - pattern detection: gamma applied to PS
......@@ -1185,7 +1194,7 @@ if (MORE_BUTTONS) {
return;
/* ======================================================================== */
} else if (label.equals("Conf. OTF Filter")) {
showOTFFilterParametersDialog(OTF_FILTER);
showOTFFilterParametersDialog(OTF_FILTER, OTF_FILTER_LWIR); // second may be null
return;
/* ======================================================================== */
} else if (label.equals("Conf. Interpolation")) {
......@@ -9168,7 +9177,8 @@ if (MORE_BUTTONS) {
// FFT_OVERLAP, ////int fft_overlap,
// FFT_SIZE, //int fft_size,
PSF_SUBPIXEL, // //int PSF_subpixel,
OTF_FILTER, // //OTFFilterParameters otfFilterParameters,
OTF_FILTER, // OTFFilterParameters otfFilterParameters,
OTF_FILTER_LWIR, //OTFFilterParameters otfFilterParameters_lwir,
PSF_PARS, //PSFParameters psfParameters,
INVERSE.dSize, //int PSFKernelSize, // size of square used in the new map (should be multiple of map step)
......@@ -15516,6 +15526,7 @@ private double [][] jacobianByJacobian(double [][] jacobian, boolean [] mask) {
boolean select_INVERSE=!select;
boolean select_PSF_PARS=!select;
boolean select_OTF_FILTER=!select;
boolean select_OTF_FILTER_LWIR=!select;
boolean select_PATTERN_DETECT=!select;
boolean select_COMPONENTS=!select;
boolean select_SHOW_RESULTS=!select;
......@@ -15557,6 +15568,7 @@ private double [][] jacobianByJacobian(double [][] jacobian, boolean [] mask) {
gd.addCheckbox("INVERSE",select_INVERSE);
gd.addCheckbox("PSF_PARS",select_PSF_PARS);
gd.addCheckbox("OTF_FILTER",select_OTF_FILTER);
gd.addCheckbox("OTF_FILTER_LWIR",select_OTF_FILTER_LWIR);
gd.addCheckbox("PATTERN_DETECT",select_PATTERN_DETECT);
gd.addCheckbox("COMPONENTS",select_COMPONENTS);
gd.addCheckbox("SHOW_RESULTS",select_SHOW_RESULTS);
......@@ -15599,6 +15611,7 @@ private double [][] jacobianByJacobian(double [][] jacobian, boolean [] mask) {
select_INVERSE=gd.getNextBoolean();
select_PSF_PARS=gd.getNextBoolean();
select_OTF_FILTER=gd.getNextBoolean();
select_OTF_FILTER_LWIR=gd.getNextBoolean();
select_PATTERN_DETECT=gd.getNextBoolean();
select_COMPONENTS=gd.getNextBoolean();
select_SHOW_RESULTS=gd.getNextBoolean();
......@@ -15639,6 +15652,7 @@ private double [][] jacobianByJacobian(double [][] jacobian, boolean [] mask) {
if (select_INVERSE) INVERSE.setProperties( "INVERSE.", properties);
if (select_PSF_PARS) PSF_PARS.setProperties( "PSF_PARS.", properties);
if (select_OTF_FILTER) OTF_FILTER.setProperties( "OTF_FILTER.", properties);
if (select_OTF_FILTER) OTF_FILTER_LWIR.setProperties( "OTF_FILTER_LWIR.", properties);
if (select_PATTERN_DETECT) PATTERN_DETECT.setProperties( "PATTERN_DETECT.", properties);
if (select_COMPONENTS) COMPONENTS.setProperties( "COMPONENTS.", properties);
if (select_SHOW_RESULTS) SHOW_RESULTS.setProperties( "SHOW_RESULTS.", properties);
......@@ -15682,6 +15696,7 @@ private double [][] jacobianByJacobian(double [][] jacobian, boolean [] mask) {
INVERSE.getProperties("INVERSE.", properties);
PSF_PARS.getProperties("PSF_PARS.", properties);
OTF_FILTER.getProperties("OTF_FILTER.", properties);
OTF_FILTER_LWIR.getProperties("OTF_FILTER_LWIR.", properties);
PATTERN_DETECT.getProperties("PATTERN_DETECT.", properties);
COMPONENTS.getProperties("COMPONENTS.", properties);
SHOW_RESULTS.getProperties("SHOW_RESULTS.", properties);
......@@ -20391,13 +20406,29 @@ use the result to create a rejectiobn mask - if the energy was high, (multiplica
/* ======================================================================== */
/* ======================================================================== */
/**TODO: add variable gaussian filter to direct psf */
public boolean showOTFFilterParametersDialog(EyesisAberrations.OTFFilterParameters otfFilterParameters) {
public boolean showOTFFilterParametersDialog(
EyesisAberrations.OTFFilterParameters otfFilterParameters,
EyesisAberrations.OTFFilterParameters otfFilterParameters_lwir) {
GenericDialog gd = new GenericDialog("OTF Filter parameters");
if (otfFilterParameters_lwir!=null) {
gd.addMessage("EO (high-res color) sensors:");
}
gd.addNumericField("Invert deconvolution if less than", otfFilterParameters.deconvInvert, 3);
gd.addNumericField("OTF zero frequency size on power spectrum ", otfFilterParameters.zerofreqSize, 3); //2.0;
gd.addNumericField("OTF smouth PS to generate alias rejection mask (0 - none)", otfFilterParameters.smoothPS, 3); //2.5 - smooth model PS for rejecting aliases (0 - no smouth, >0 additional Gauss )
gd.addNumericField("OTF relative high value of PS for rejection mask ", otfFilterParameters.thresholdHigh, 3); //0.1
gd.addNumericField("OTF relative low value of PS for rejection mask ", otfFilterParameters.thresholdLow, 3); //0.01; // when FFT component is less than this fraction of the maximal value, replace 1/z with Z
if (otfFilterParameters_lwir!=null) {
gd.addMessage("LWIR (low-res mono) sensors:");
gd.addNumericField("Invert deconvolution if less than", otfFilterParameters_lwir.deconvInvert, 3);
gd.addNumericField("OTF zero frequency size on power spectrum ", otfFilterParameters_lwir.zerofreqSize, 3); //2.0;
gd.addNumericField("OTF smouth PS to generate alias rejection mask (0 - none)", otfFilterParameters_lwir.smoothPS, 3); //2.5 - smooth model PS for rejecting aliases (0 - no smouth, >0 additional Gauss )
gd.addNumericField("OTF relative high value of PS for rejection mask ", otfFilterParameters_lwir.thresholdHigh, 3); //0.1
gd.addNumericField("OTF relative low value of PS for rejection mask ", otfFilterParameters_lwir.thresholdLow, 3); //0.01; // when FFT component is less than this fraction of the maximal value, replace 1/z with Z
}
gd.showDialog();
if (gd.wasCanceled()) return false;
otfFilterParameters.deconvInvert= gd.getNextNumber();
......@@ -20405,6 +20436,13 @@ use the result to create a rejectiobn mask - if the energy was high, (multiplica
otfFilterParameters.smoothPS= gd.getNextNumber();
otfFilterParameters.thresholdHigh= gd.getNextNumber();
otfFilterParameters.thresholdLow= gd.getNextNumber();
if (otfFilterParameters_lwir!=null) {
otfFilterParameters_lwir.deconvInvert= gd.getNextNumber();
otfFilterParameters_lwir.zerofreqSize= gd.getNextNumber();
otfFilterParameters_lwir.smoothPS= gd.getNextNumber();
otfFilterParameters_lwir.thresholdHigh= gd.getNextNumber();
otfFilterParameters_lwir.thresholdLow= gd.getNextNumber();
}
return true;
}
/* ======================================================================== */
......@@ -4807,8 +4807,6 @@ public class MatchSimulatedPattern {
}
}
// if (nowDebugCell)correctedPatternCrossLocationAverage4(
double [] centerXY=correctedPatternCrossLocation(
lwirReaderParameters, // LwirReaderParameters lwirReaderParameters, // null is OK
patternGrid[iUV[1]][iUV[0]][0], // initial coordinates of the pattern cross point
......
......@@ -1009,14 +1009,32 @@ Cv=(Cy*x-Cx*y)+(-Cy*Dx+Cx*Dy)
y0);
}
public double [] extractSimulMono ( // TODO: can use twice smaller barray
double [] localbArray,
SimulParameters simulParameters,
int outSubdiv, // subdivide output pixels - now 4
int size, // number of Bayer cells in width of the square selection (half number of pixels)
double x0, // selection center, X (in pixels)
double y0) {
return extractSimulMono ( // TODO: can use twice smaller barray
localbArray,
false, // boolean invert,
simulParameters,
outSubdiv, // subdivide output pixels - now 4
size, // number of Bayer cells in width of the square selection (half number of pixels)
x0, // selection center, X (in pixels)
y0);
}
public double [] extractSimulMono ( // TODO: can use twice smaller barray
double [] localbArray,
boolean invert,
SimulParameters simulParameters,
int outSubdiv, // subdivide output pixels - now 4
int size, // number of Bayer cells in width of the square selection (half number of pixels)
double x0, // selection center, X (in pixels)
double y0) {
double pattern_sign = invert? -1.0 : 1.0;
int sampleWidth=(int) (Math.sqrt(simulParameters.fill)*simulParameters.subdiv);
int sampleN=sampleWidth*sampleWidth;
if (sampleWidth<1) sampleWidth=1;
......@@ -1043,7 +1061,7 @@ Cv=(Cy*x-Cx*y)+(-Cy*Dx+Cx*Dy)
return null;
}
}
simul_pixels[iy*size+ix]= (s-sampleAverage)/sampleAverage;
simul_pixels[iy*size+ix]= pattern_sign * (s - sampleAverage) / sampleAverage;
}
}
if (this.debugLevel>2) {
......@@ -1069,6 +1087,7 @@ Cv=(Cy*x-Cx*y)+(-Cy*Dx+Cx*Dy)
return rslt;
}
// colorComp == -1 = mono, positive, colorComp == -2 - mono, negative
public double[] extractBayerSim (
float [][] spixels, // [0] - regular pixels, [1] - shifted by 1/2 diagonally, for checker greens
int full_width,
......@@ -1106,6 +1125,7 @@ Cv=(Cy*x-Cx*y)+(-Cy*Dx+Cx*Dy)
}
} else { // components 0..3
int ser;
double pattern_sign = (colorComp == -2)? -1.0: 1.0;
if (colorComp < 0) {
ser = 1; // offset by 1/2 pix? should it be so? // FIXME: verify and fix if needed - compare to extractSimulMono()
} else {
......@@ -1125,7 +1145,7 @@ Cv=(Cy*x-Cx*y)+(-Cy*Dx+Cx*Dy)
else if (iy >= full_height) iy = full_height - 1;
if (ix < 0) ix = 0;
else if (ix >= full_width) iy = full_width - 1;
result[index] = spixels[ser][iy * full_width + ix];
result[index] = pattern_sign * spixels[ser][iy * full_width + ix];
}
}
return result;
......
......@@ -171,7 +171,7 @@ public class DoubleGaussianBlur {
if (kRadius > maxRadius) kRadius = maxRadius;
double[][] kernel = new double[2][kRadius];
for (int i=0; i<kRadius; i++) // Gaussian function
kernel[0][i] = (double)(Math.exp(-0.5*i*i/sigma/sigma));
kernel[0][i] = (Math.exp(-0.5*i*i/sigma/sigma));
if (kRadius < maxRadius && kRadius > 3) { // edge correction
double sqrtSlope = Double.MAX_VALUE;
int r = kRadius;
......@@ -184,7 +184,7 @@ public class DoubleGaussianBlur {
break;
}
for (int r1 = r+2; r1 < kRadius; r1++)
kernel[0][r1] = (double)((kRadius-r1)*(kRadius-r1)*sqrtSlope*sqrtSlope);
kernel[0][r1] = (kRadius-r1)*(kRadius-r1)*sqrtSlope*sqrtSlope;
}
double sum; // sum over all kernel elements for normalization
if (kRadius < maxRadius) {
......@@ -197,9 +197,9 @@ public class DoubleGaussianBlur {
double rsum = 0.5 + 0.5*kernel[0][0]/sum;
for (int i=0; i<kRadius; i++) {
double v = (kernel[0][i]/sum);
kernel[0][i] = (double)v;
kernel[0][i] = v;
rsum -= v;
kernel[1][i] = (double)rsum;
kernel[1][i] = rsum;
//IJ.log("k["+i+"]="+(float)v+" sum="+(float)rsum);
}
return kernel;
......@@ -213,6 +213,10 @@ public class DoubleGaussianBlur {
*/
void downscaleLine(double[] pixels, double[] cache, double[] kernel,
int reduceBy, int pixel0, int unscaled0, int length, int pointInc, int newLength) {
if (pixel0 > pixels.length) {
System.out.println("++++++ Error in DoubleGaussianBlur, pixel0="+pixel0+", pixels.length="+(pixels.length));
return;
}
double first = pixels[pixel0];
double last = pixels[pixel0 + pointInc*(length-1)];
int xin = unscaled0 - reduceBy/2;
......@@ -241,13 +245,13 @@ public class DoubleGaussianBlur {
double[] kernel = new double[3*unitLength];
for (int i=0; i<=unitLength/2; i++) {
double x = i/(double)unitLength;
double v = (double)((0.75-x*x)/unitLength);
double v = (0.75-x*x)/unitLength;
kernel[mid-i] = v;
kernel[mid+i] = v;
}
for (int i=unitLength/2+1; i<(unitLength*3+1)/2; i++) {
double x = i/(double)unitLength;
double v = (double)((0.125 + 0.5*(x-1)*(x-2))/unitLength);
double v = (0.125 + 0.5*(x-1)*(x-2))/unitLength;
kernel[mid-i] = v;
kernel[mid+i] = v;
}
......@@ -284,13 +288,13 @@ public class DoubleGaussianBlur {
kernel[0] = 0;
for (int i=0; i<unitLength; i++) {
double x = i/(double)unitLength;
double v = (double)((2./3. -x*x*(1-0.5*x)));
double v = ((2./3. -x*x*(1-0.5*x)));
kernel[mid+i] = v;
kernel[mid-i] = v;
}
for (int i=unitLength; i<2*unitLength; i++) {
double x = i/(double)unitLength;
double v = (double)((2.-x)*(2.-x)*(2.-x)/6.);
double v = (2.-x)*(2.-x)*(2.-x)/6.;
kernel[mid+i] = v;
kernel[mid-i] = v;
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment