Skip to content

E
ezynq
Commit 89bb3ac2 authored by Oleg Dzhimiev's avatar Oleg Dzhimiev
Browse files
Options

changed //(invalid) to /* */

parent bbbfb42e
Hide whitespace changes
Inline Side-by-side
Showing with 6 additions and 6 deletions
u-boot-tree/include/configs/ezynq/ezynq_microzed.h
View file @ 89bb3ac2
...@@ -78,10 +78,10 @@ ...@@ -78,10 +78,10 @@
#define CONFIG_EZYNQ_MIO_SDIO_0__PULLUP #define CONFIG_EZYNQ_MIO_SDIO_0__PULLUP
#define CONFIG_EZYNQ_MIO_SDCD_0 46 /* any but 7,8 */ #define CONFIG_EZYNQ_MIO_SDCD_0 46 /* any but 7,8 */
#define CONFIG_EZYNQ_MIO_SDCD_0__PULLUP #define CONFIG_EZYNQ_MIO_SDCD_0__PULLUP
//#define CONFIG_EZYNQ_MIO_SDWP_0 50 /* #any but 7,8 */ /*#define CONFIG_EZYNQ_MIO_SDWP_0 50*/ /* #any but 7,8 */
//#define CONFIG_EZYNQ_MIO_SDWP_0__PULLUP /*#define CONFIG_EZYNQ_MIO_SDWP_0__PULLUP*/
#define CONFIG_EZYNQ_MIO_UART_1 48 /* # 8+4*N */ #define CONFIG_EZYNQ_MIO_UART_1 48 /* # 8+4*N */
//#define CONFIG_EZYNQ_MIO_UART_0 50 /* # 8+4*N */ /*#define CONFIG_EZYNQ_MIO_UART_0 50*/ /* # 8+4*N */
/* LED will be OFF */ /* LED will be OFF */
#define CONFIG_EZYNQ_MIO_INOUT_47 OUT /* Make output, do not set data. Will be set after debug will be over */ #define CONFIG_EZYNQ_MIO_INOUT_47 OUT /* Make output, do not set data. Will be set after debug will be over */
#define CONFIG_EZYNQ_MIO_GPIO_OUT_7 1 /* Set selected GPIO output to 0/1 */ #define CONFIG_EZYNQ_MIO_GPIO_OUT_7 1 /* Set selected GPIO output to 0/1 */
......
u-boot-tree/include/configs/ezynq/ezynq_zed.h
View file @ 89bb3ac2
...@@ -29,7 +29,7 @@ ...@@ -29,7 +29,7 @@
/* Boot debug setup */ /* Boot debug setup */
#define CONFIG_EZYNQ_BOOT_DEBUG Y /* configure UARTx and send register dumps there.*/ #define CONFIG_EZYNQ_BOOT_DEBUG Y /* configure UARTx and send register dumps there.*/
#define CONFIG_EZYNQ_LOCK_SLCR OFF /* Lock SLCR registers when all is done. */ #define CONFIG_EZYNQ_LOCK_SLCR OFF /* Lock SLCR registers when all is done. */
//#define CONFIG_EZYNQ_LED_DEBUG 47 /* toggle LED during boot */ /*#define CONFIG_EZYNQ_LED_DEBUG 47*/ /* toggle LED during boot */
#define CONFIG_EZYNQ_UART_DEBUG_USE_LED N /* turn on/off LED while waiting for transmit FIFO not full */ #define CONFIG_EZYNQ_UART_DEBUG_USE_LED N /* turn on/off LED while waiting for transmit FIFO not full */
#define CONFIG_EZYNQ_DUMP_SLCR_EARLY N /* Dump SLCR registers as soon as UART is initialized (depends on CONFIG_EZYNQ_BOOT_DEBUG) */ #define CONFIG_EZYNQ_DUMP_SLCR_EARLY N /* Dump SLCR registers as soon as UART is initialized (depends on CONFIG_EZYNQ_BOOT_DEBUG) */
...@@ -82,8 +82,8 @@ ...@@ -82,8 +82,8 @@
#define CONFIG_EZYNQ_MIO_SDWP_0__PULLUP #define CONFIG_EZYNQ_MIO_SDWP_0__PULLUP
#define CONFIG_EZYNQ_MIO_UART_1 48 /* # 8+4*N */ #define CONFIG_EZYNQ_MIO_UART_1 48 /* # 8+4*N */
/* LED will be OFF */ /* LED will be OFF */
//#define CONFIG_EZYNQ_MIO_INOUT_47 OUT /* Make output, do not set data. Will be set after debug will be over */ /*#define CONFIG_EZYNQ_MIO_INOUT_47 OUT*/ /* Make output, do not set data. Will be set after debug will be over */
//#define CONFIG_EZYNQ_MIO_GPIO_OUT_7 1 /* Set selected GPIO output to 0/1 */ /*#define CONFIG_EZYNQ_MIO_GPIO_OUT_7 1*/ /* Set selected GPIO output to 0/1 */
#define CONFIG_EZYNQ_UART_DEBUG_CHANNEL 0x1 #define CONFIG_EZYNQ_UART_DEBUG_CHANNEL 0x1
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment