duplicate file in wrong directory

u-boot-tree/include/configs/ezynq/zynq_microzed.h

-/*
- * (C) Copyright 2012 Xilinx
- *
- * Configuration for Zynq Evaluation and Development Board - ZedBoard
- * See zynq_common.h for Zynq common configs
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_ZYNQ_MICROZED_H
-#define __CONFIG_ZYNQ_MICROZED_H
-
-/*#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024) */
-#define PHYS_SDRAM_1_SIZE (1024 * 1024 * 1024)
-
-#define CONFIG_ZYNQ_SERIAL_UART1
-#if 0
-#define CONFIG_ZYNQ_GEM0
-#define CONFIG_ZYNQ_GEM_PHY_ADDR0	0
-#endif
-
-#define CONFIG_SYS_NO_FLASH
-
-#define CONFIG_ZYNQ_SDHCI0
-//#define CONFIG_ZYNQ_SPI
-
-//#define CONFIG_NAND_ZYNQ
-#undef CONFIG_SYS_TEXT_BASE
-#include <configs/zynq_common.h>
-#include <configs/ezynq/ezynq_MT41K256M16RE125.h>  /* should be before zed_ezynq.h as it overwrites DDR3L with DDR3 */
-#include <configs/ezynq/ezynq_XC7Z010_1CLG400.h>
-#include <configs/ezynq/zed_ezynq.h>
-
-//#define CONFIG_CMD_MEMTEST
-#undef CONFIG_EZYNQ_BOOT_DEBUG 
-
-/* twice slower */
-#undef CONFIG_ZYNQ_SERIAL_CLOCK0
-/*#define CONFIG_ZYNQ_SERIAL_CLOCK0	25000000*/
-#define CONFIG_ZYNQ_SERIAL_CLOCK0	1000000 * (CONFIG_EZYNQ_CLK_UART_MHZ)
-#undef CONFIG_ZYNQ_SERIAL_CLOCK1
-/*#define CONFIG_ZYNQ_SERIAL_CLOCK1	25000000*/
-#define CONFIG_ZYNQ_SERIAL_CLOCK1	1000000 * (CONFIG_EZYNQ_CLK_UART_MHZ)
-
-
-#undef CONFIG_BOOTDELAY
-#undef CONFIG_SYS_PROMPT
-#undef CONFIG_SYS_SDRAM_BASE
-#undef CONFIG_ENV_SIZE
-#undef CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_BOOTDELAY	-1 /* -1 to Disable autoboot */
-#define CONFIG_SYS_PROMPT		"ezynq> "
-
-
-#define CONFIG_SYS_SDRAM_BASE		0x00000000 /* Physical start address of SDRAM. _Must_ be 0 here. */
-#define CONFIG_ENV_SIZE		        1400
-#if 0
-  #define CONFIG_SYS_TEXT_BASE		0x04000000 /*with 0x04000000 - does not get to the low_Level_init? */
-#else
-  #define CONFIG_SYS_TEXT_BASE		0x00000000 //0x04000000 with 0x04000000 - does not get to the low_Level_init?
-#endif
-/*
-#define CONFIG_EZYNQ_SKIP_DDR
-*/
-#define CONFIG_EZYNQ_SKIP_CLK
-
-//undefs
-
-/* undefs */
-/*#undef CONFIG_FS_FAT */
-/* #undef CONFIG_SUPPORT_VFAT */
-/* #undef CONFIG_CMD_FAT */
-/* http://lists.denx.de/pipermail/u-boot/2003-October/002631.html */
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_ZLIB
-#undef CONFIG_GZIP
-/* CONFIG_FS_FAT=y */
-
-
-/* disable PL*/
-#undef CONFIG_FPGA
-#undef CONFIG_FPGA_XILINX
-#undef CONFIG_FPGA_ZYNQPL
-#undef CONFIG_CMD_FPGA
-
-#undef CONFIG_CMD_EXT2
-
-#undef CONFIG_CMD_CACHE
-
-#undef DEBUG
-#undef CONFIG_AUTO_COMPLETE
-#undef CONFIG_SYS_LONGHELP
-
-/* redefine env settings*/
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS	\
-	"ethaddr=00:0a:35:00:01:22\0"	\
-	"kernel_image=uImage\0"	\
-	"ramdisk_image=uramdisk.image.gz\0"	\
-	"devicetree_image=devicetree.dtb\0"	\
-	"bitstream_image=system.bit.bin\0"	\
-	"loadbit_addr=0x100000\0"	\
-	"kernel_size=0x500000\0"	\
-	"devicetree_size=0x20000\0"	\
-	"ramdisk_size=0x5E0000\0"	\
-	"fdt_high=0x20000000\0"	\
-	"initrd_high=0x20000000\0"	\
-	"mmc_loadbit_fat=echo Loading bitstream from SD/MMC/eMMC to RAM.. && " \
-		"mmcinfo && " \
-		"fatload mmc 0 ${loadbit_addr} ${bitstream_image} && " \
-		"fpga load 0 ${loadbit_addr} ${filesize}\0" \
-	"sdboot=echo Copying Linux from SD to RAM... && " \
-		"mmcinfo && " \
-		"fatload mmc 0 0x3000000 ${kernel_image} && " \
-		"fatload mmc 0 0x2A00000 ${devicetree_image} && " \
-		"fatload mmc 0 0x2000000 ${ramdisk_image} && " \
-		"bootm 0x3000000 0x2000000 0x2A00000\0" \
-	"nandboot=echo Copying Linux from NAND flash to RAM... && " \
-		"nand read 0x3000000 0x100000 ${kernel_size} && " \
-		"nand read 0x2A00000 0x600000 ${devicetree_size} && " \
-		"echo Copying ramdisk... && " \
-		"nand read 0x2000000 0x620000 ${ramdisk_size} && " \
-		"bootm 0x3000000 0x2000000 0x2A00000\0"
-/*  */
-#endif /* __CONFIG_ZYNQ_MICROZED_H */