duplicate file in wrong directory

/*

 * (C) Copyright 2012 Xilinx

 *

 * Configuration for Zynq Evaluation and Development Board - ZedBoard

 * See zynq_common.h for Zynq common configs

 *

 * This program is free software; you can redistribute it and/or

 * modify it under the terms of the GNU General Public License as

 * published by the Free Software Foundation; either version 2 of

 * the License, or (at your option) any later version.

 *

 * You should have received a copy of the GNU General Public License

 * along with this program; if not, write to the Free Software

 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,

 * MA 02111-1307 USA

 */

#ifndef __CONFIG_ZYNQ_MICROZED_H

#define __CONFIG_ZYNQ_MICROZED_H

/*#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024) */

#define PHYS_SDRAM_1_SIZE (1024 * 1024 * 1024)

#define CONFIG_ZYNQ_SERIAL_UART1

#if 0

#define CONFIG_ZYNQ_GEM0

#define CONFIG_ZYNQ_GEM_PHY_ADDR0	0

#endif

#define CONFIG_SYS_NO_FLASH

#define CONFIG_ZYNQ_SDHCI0

//#define CONFIG_ZYNQ_SPI

//#define CONFIG_NAND_ZYNQ

#undef CONFIG_SYS_TEXT_BASE

#include <configs/zynq_common.h>

#include <configs/ezynq/ezynq_MT41K256M16RE125.h>  /* should be before zed_ezynq.h as it overwrites DDR3L with DDR3 */

#include <configs/ezynq/ezynq_XC7Z010_1CLG400.h>

#include <configs/ezynq/zed_ezynq.h>

//#define CONFIG_CMD_MEMTEST

#undef CONFIG_EZYNQ_BOOT_DEBUG 

/* twice slower */

#undef CONFIG_ZYNQ_SERIAL_CLOCK0

/*#define CONFIG_ZYNQ_SERIAL_CLOCK0	25000000*/

#define CONFIG_ZYNQ_SERIAL_CLOCK0	1000000 * (CONFIG_EZYNQ_CLK_UART_MHZ)

#undef CONFIG_ZYNQ_SERIAL_CLOCK1

/*#define CONFIG_ZYNQ_SERIAL_CLOCK1	25000000*/

#define CONFIG_ZYNQ_SERIAL_CLOCK1	1000000 * (CONFIG_EZYNQ_CLK_UART_MHZ)

#undef CONFIG_BOOTDELAY

#undef CONFIG_SYS_PROMPT

#undef CONFIG_SYS_SDRAM_BASE

#undef CONFIG_ENV_SIZE

#undef CONFIG_SYS_TEXT_BASE

#define CONFIG_BOOTDELAY	-1 /* -1 to Disable autoboot */

#define CONFIG_SYS_PROMPT		"ezynq> "

#define CONFIG_SYS_SDRAM_BASE		0x00000000 /* Physical start address of SDRAM. _Must_ be 0 here. */

#define CONFIG_ENV_SIZE		        1400

#if 0

  #define CONFIG_SYS_TEXT_BASE		0x04000000 /*with 0x04000000 - does not get to the low_Level_init? */

#else

  #define CONFIG_SYS_TEXT_BASE		0x00000000 //0x04000000 with 0x04000000 - does not get to the low_Level_init?

#endif

/*

#define CONFIG_EZYNQ_SKIP_DDR

*/

#define CONFIG_EZYNQ_SKIP_CLK

//undefs

/* undefs */

/*#undef CONFIG_FS_FAT */

/* #undef CONFIG_SUPPORT_VFAT */

/* #undef CONFIG_CMD_FAT */

/* http://lists.denx.de/pipermail/u-boot/2003-October/002631.html */

#undef CONFIG_CMD_LOADB

#undef CONFIG_CMD_LOADS

#undef CONFIG_ZLIB

#undef CONFIG_GZIP

/* CONFIG_FS_FAT=y */

/* disable PL*/

#undef CONFIG_FPGA

#undef CONFIG_FPGA_XILINX

#undef CONFIG_FPGA_ZYNQPL

#undef CONFIG_CMD_FPGA

#undef CONFIG_CMD_EXT2

#undef CONFIG_CMD_CACHE

#undef DEBUG

#undef CONFIG_AUTO_COMPLETE

#undef CONFIG_SYS_LONGHELP

/* redefine env settings*/

#undef CONFIG_EXTRA_ENV_SETTINGS

#define CONFIG_EXTRA_ENV_SETTINGS	\

	"ethaddr=00:0a:35:00:01:22\0"	\

	"kernel_image=uImage\0"	\

	"ramdisk_image=uramdisk.image.gz\0"	\

	"devicetree_image=devicetree.dtb\0"	\

	"bitstream_image=system.bit.bin\0"	\

	"loadbit_addr=0x100000\0"	\

	"kernel_size=0x500000\0"	\

	"devicetree_size=0x20000\0"	\

	"ramdisk_size=0x5E0000\0"	\

	"fdt_high=0x20000000\0"	\

	"initrd_high=0x20000000\0"	\

	"mmc_loadbit_fat=echo Loading bitstream from SD/MMC/eMMC to RAM.. && " \

		"mmcinfo && " \

		"fatload mmc 0 ${loadbit_addr} ${bitstream_image} && " \

		"fpga load 0 ${loadbit_addr} ${filesize}\0" \

	"sdboot=echo Copying Linux from SD to RAM... && " \

		"mmcinfo && " \

		"fatload mmc 0 0x3000000 ${kernel_image} && " \

		"fatload mmc 0 0x2A00000 ${devicetree_image} && " \

		"fatload mmc 0 0x2000000 ${ramdisk_image} && " \

		"bootm 0x3000000 0x2000000 0x2A00000\0" \

	"nandboot=echo Copying Linux from NAND flash to RAM... && " \

		"nand read 0x3000000 0x100000 ${kernel_size} && " \

		"nand read 0x2A00000 0x600000 ${devicetree_size} && " \

		"echo Copying ramdisk... && " \

		"nand read 0x2000000 0x620000 ${ramdisk_size} && " \

		"bootm 0x3000000 0x2000000 0x2A00000\0"

/*  */

#endif /* __CONFIG_ZYNQ_MICROZED_H */