Commit d02fb53f authored by Andrey Filippov's avatar Andrey Filippov

set initial SENSOR_PHASE

parent 29734919
...@@ -2447,6 +2447,7 @@ function createDefaultConfig($version, $port, $multisensor = false, $eyesis_mode ...@@ -2447,6 +2447,7 @@ function createDefaultConfig($version, $port, $multisensor = false, $eyesis_mode
$HISTWND_RLEFT = 0x8000; $HISTWND_RLEFT = 0x8000;
$HISTWND_RTOP = 0x8000; $HISTWND_RTOP = 0x8000;
$COLOR = 0; $COLOR = 0;
$SENSOR_PHASE = $multisensor ? 0x55 : 0x15;
switch ($eyesis_mode) { switch ($eyesis_mode) {
case 1 : case 1 :
...@@ -2686,7 +2687,7 @@ DEFAULT_CONFIG ...@@ -2686,7 +2687,7 @@ DEFAULT_CONFIG
// will create $SENSOR_PHASE=...;MULTI_PHASE1=...;MULTI_PHASE3=...;) // will create $SENSOR_PHASE=...;MULTI_PHASE1=...;MULTI_PHASE3=...;)
extract ( calculateDefaultPhases () ); // read sensor phases from memory or calculate from the eeproms for newer devices // extract ( calculateDefaultPhases () ); // read sensor phases from memory or calculate from the eeproms for newer devices
// / Now select window orientations based on eyesis_mode // / Now select window orientations based on eyesis_mode
return <<<DEFAULT_CONFIG return <<<DEFAULT_CONFIG
<?xml version="1.0" standalone="yes"?> <?xml version="1.0" standalone="yes"?>
...@@ -2829,7 +2830,7 @@ DEFAULT_CONFIG ...@@ -2829,7 +2830,7 @@ DEFAULT_CONFIG
<DGAINB>"&quot;Digital gain&quot; for the blue color channel - 17 bit unsigned value. Default value is 0x8000 fro 1.0, so up to 4X gain boost is available before saturation"</DGAINB> <DGAINB>"&quot;Digital gain&quot; for the blue color channel - 17 bit unsigned value. Default value is 0x8000 fro 1.0, so up to 4X gain boost is available before saturation"</DGAINB>
<CORING_PAGE>"Number of coring LUT page number. Current software programs only page 0 (of 8) using CORING_INDEX parameter."</CORING_PAGE> <CORING_PAGE>"Number of coring LUT page number. Current software programs only page 0 (of 8) using CORING_INDEX parameter."</CORING_PAGE>
<TILES>Number of 16x16 (20x20) tiles in a compressed frame (readonly)</TILES> <TILES>Number of 16x16 (20x20) tiles in a compressed frame (readonly)</TILES>
<SENSOR_PHASE>"Sensor phase adjusment, packed, low 16 bit - signed fine phase, bits [18:17] - 90-degrees shift"</SENSOR_PHASE> <SENSOR_PHASE>"Sensor port signals phase coarse: [1:0] - data 90 degree shift, [6,3:2] - HACT 90 degree (two periods), [5:4] - VACT 90 degree shift </SENSOR_PHASE>
<TEMPERATURE_PERIOD>"Period of sensor temperature measurements, ms"</TEMPERATURE_PERIOD> <TEMPERATURE_PERIOD>"Period of sensor temperature measurements, ms"</TEMPERATURE_PERIOD>
<AUTOEXP_ON>"1 - autoexposure enabled when, 0 - autoexpousre disabled. Autoexposure can still be off if the bit responsible for autoexposure daemon in DAEMON_EN is turned off - in the latter case the whole autoexposure daemon will be disabled, including white balancing and hdr mode also."</AUTOEXP_ON> <AUTOEXP_ON>"1 - autoexposure enabled when, 0 - autoexpousre disabled. Autoexposure can still be off if the bit responsible for autoexposure daemon in DAEMON_EN is turned off - in the latter case the whole autoexposure daemon will be disabled, including white balancing and hdr mode also."</AUTOEXP_ON>
<HISTWND_RWIDTH>"Histogram (used for autoexposure, white balancing and just histograms display) window width, relative to the window (WOI) width. It is defined as a fraction of 65536(0x10000), so 0x8000 is 50%"</HISTWND_RWIDTH> <HISTWND_RWIDTH>"Histogram (used for autoexposure, white balancing and just histograms display) window width, relative to the window (WOI) width. It is defined as a fraction of 65536(0x10000), so 0x8000 is 50%"</HISTWND_RWIDTH>
...@@ -3475,8 +3476,8 @@ DEFAULT_CONFIG ...@@ -3475,8 +3476,8 @@ DEFAULT_CONFIG
<MULTI_FLIPV> $MULTI_FLIPV</MULTI_FLIPV> <MULTI_FLIPV> $MULTI_FLIPV</MULTI_FLIPV>
<MULTI_SELECTED>$MULTI_SELECTED</MULTI_SELECTED> <MULTI_SELECTED>$MULTI_SELECTED</MULTI_SELECTED>
<!-- <SENSOR_PHASE>$SENSOR_PHASE</SENSOR_PHASE> <SENSOR_PHASE>$SENSOR_PHASE</SENSOR_PHASE>
<MULTI_PHASE1>$MULTI_PHASE1</MULTI_PHASE1> <!-- <MULTI_PHASE1>$MULTI_PHASE1</MULTI_PHASE1>
<MULTI_PHASE2>$MULTI_PHASE2</MULTI_PHASE2> <MULTI_PHASE2>$MULTI_PHASE2</MULTI_PHASE2>
<MULTI_PHASE3>$MULTI_PHASE3</MULTI_PHASE3> --> <MULTI_PHASE3>$MULTI_PHASE3</MULTI_PHASE3> -->
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment