Commit c428b27f authored by Andrey Filippov's avatar Andrey Filippov

Fixed IMMEDIATE mode (not propagation for FRAME_PERIOD), typos

parent e0197a92
......@@ -125,7 +125,7 @@
changed default IP back to 192.168.0.9 (temporarily was 192.168.0.7)
Revision 1.4 2008/11/30 05:34:56 elphel
temporary disabled white balance - it need to be updated fro the new gain control
temporary disabled white balance - it need to be updated for the new gain control
Revision 1.3 2008/11/30 05:01:03 elphel
Changing gains/scales behavior
......@@ -589,6 +589,7 @@ function reset_camera(){
'DAEMON_EN' => 0
), $frame_to_set, ELPHEL_CONST_FRAMEPAIR_FORCE_NEWPROC ); // was -1 ("this frame")
elphel_set_P_value ( $port, ELPHEL_TRIG_DECIMATE, 0, ELPHEL_CONST_FRAME_IMMED, ELPHEL_CONST_FRAMEPAIR_FORCE_NEWPROC);
elphel_set_P_value ( $port, ELPHEL_TRIG_DECIMATE, 0);// above does not propagate to the rest of the ring buffer 04.11.2022
}
// advance frames, so next settings will be ASAP (sent immediate, not limited to 64?)
// disable trig period decimation
......@@ -1401,6 +1402,7 @@ function init_cameras(){ // $page) { init can only be from default page as page
if (array_key_exists('TRIG_PERIOD',$GLOBALS['trig_pars']) && ($GLOBALS['trig_pars']['TRIG_PERIOD'] > 255)){
$trig_period = $GLOBALS['trig_pars']['TRIG_PERIOD'];
unset($GLOBALS['trig_pars']['TRIG_PERIOD']);
log_msg ('trig_period = '.$trig_period." unset(GLOBALS['trig_pars']['TRIG_PERIOD'])",0);
}
elphel_set_P_arr ($GLOBALS['master_port'], $GLOBALS['trig_pars']); // set other parameters - they will not take effect immediately
if ($all_trig_decimate) {
......@@ -1418,6 +1420,7 @@ function init_cameras(){ // $page) { init can only be from default page as page
// Set parameter immediately
// log_msg("pre3.Trigger $i:\n".file_get_contents($GLOBALS['sysfs_all_frames']));
elphel_set_P_value ( $GLOBALS['master_port'], ELPHEL_TRIG_PERIOD, $trig_period, ELPHEL_CONST_FRAME_IMMED, ELPHEL_CONST_FRAMEPAIR_FORCE_NEWPROC);
elphel_set_P_value ( $GLOBALS['master_port'], ELPHEL_TRIG_PERIOD, $trig_period); // above does not propagate to the rest of the ring buffer 04.11.2022
elphel_set_P_value ( $GLOBALS['master_port'], ELPHEL_TRIG_CONDITION, $trig_condition);
if ( $GLOBALS['camera_state_arr']['no_async']){ // turn on triggered mode on all ports (they were off)
elphel_set_P_value ( $GLOBALS['master_port'], ELPHEL_TRIG, $trig, ELPHEL_CONST_FRAME_ASAP, 0, $broadcast);
......@@ -1452,6 +1455,8 @@ function init_cameras(){ // $page) { init can only be from default page as page
}
}
elphel_set_P_value ( $GLOBALS['master_port'], ELPHEL_TRIG_CONDITION, $trig_condition, ELPHEL_CONST_FRAME_IMMED, ELPHEL_CONST_FRAMEPAIR_FORCE_NEWPROC);
elphel_set_P_value ( $GLOBALS['master_port'], ELPHEL_TRIG_CONDITION, $trig_condition); // above does not propagate to the rest of the ring buffer 04.11.2022
if ( $GLOBALS['camera_state_arr']['no_async']){ // turn on triggered mode on all ports (they were off)
elphel_skip_frames($GLOBALS['master_port'] , ELPHEL_CONST_FRAME_DEAFAULT_AHEAD); // skip triggered frames
// turn on external triggered mode
......@@ -1507,11 +1512,14 @@ function init_cameras(){ // $page) { init can only be from default page as page
// Now elphel_set_P_arr should work with ELPHEL_CONST_FRAME_IMMED, before it was only implemented for elphel_set_P_value
// elphel_set_P_arr ($GLOBALS['master_port'], array('TRIG_OUT' => $trig_out), ELPHEL_CONST_FRAME_IMMED);
elphel_set_P_value ($GLOBALS['master_port'], ELPHEL_TRIG_OUT, $trig_out, ELPHEL_CONST_FRAME_IMMED);
elphel_set_P_value ($GLOBALS['master_port'], ELPHEL_TRIG_OUT, $trig_out); // above does not propagate to the rest of the ring buffer 04.11.2022
usleep ($GLOBALS['camera_state_arr']['max_frame_time']);
}
if ($trig_period){
elphel_set_P_value ( $GLOBALS['master_port'], ELPHEL_TRIG_PERIOD, $trig_period, ELPHEL_CONST_FRAME_IMMED);
elphel_set_P_value ( $GLOBALS['master_port'], ELPHEL_TRIG_PERIOD, $trig_period); // above does not propagate to the rest of the ring buffer? 04.11.2022
elphel_set_P_arr ( $port, $all_trig_decimate[$port], ELPHEL_CONST_FRAME_IMMED, ELPHEL_CONST_FRAMEPAIR_FORCE_NEWPROC );
elphel_set_P_arr ( $port, $all_trig_decimate[$port]); // above does not propagate to the rest of the ring buffer? 04.11.2022
log_msg("Started camera in periodic mode, period = ".(0.00000001*$trig_period)." s",3);
} else { // manually advance frames
if (!$GLOBALS['camera_state_arr']['frames_skip_more'] > ELPHEL_CONST_FRAME_DEAFAULT_AHEAD){
......@@ -1519,6 +1527,7 @@ function init_cameras(){ // $page) { init can only be from default page as page
}
log_msg("Skipping ".$GLOBALS['camera_state_arr']['frames_skip_more']." more frames");
elphel_set_P_value ( $GLOBALS['master_port'], ELPHEL_TRIG_DECIMATE, 0, ELPHEL_CONST_FRAME_IMMED, ELPHEL_CONST_FRAMEPAIR_FORCE_NEWPROC);
elphel_set_P_value ( $GLOBALS['master_port'], ELPHEL_TRIG_DECIMATE, 0);// above does not propagate to the rest of the ring buffer? 04.11.2022
for ($i = 0; $i<= $GLOBALS['camera_state_arr']['frames_skip_more']; $i++){
elphel_set_P_value ( $GLOBALS['master_port'], ELPHEL_TRIG_PERIOD, 1, ELPHEL_CONST_FRAME_IMMED, ELPHEL_CONST_FRAMEPAIR_FORCE_NEWPROC);
usleep ($GLOBALS['camera_state_arr']['max_frame_time']);
......@@ -1533,6 +1542,7 @@ function init_cameras(){ // $page) { init can only be from default page as page
//elphel_set_P_arr ($GLOBALS['master_port'], $GLOBALS['trig_pars'], $frame_to_set);
//elphel_set_P_value($GLOBALS['master_port'], ELPHEL_TRIG_CONDITION, $trig_condition, $frame_to_set+3);
elphel_set_P_arr ($GLOBALS['master_port'], $GLOBALS['trig_pars'], ELPHEL_CONST_FRAME_IMMED, ELPHEL_CONST_FRAMEPAIR_FORCE_NEWPROC);
elphel_set_P_arr ($GLOBALS['master_port'], $GLOBALS['trig_pars']);// above does not propagate to the rest of the ring buffer? 04.11.2022
elphel_set_P_value($GLOBALS['master_port'], ELPHEL_TRIG_CONDITION, $trig_condition);
log_msg ('Independently started camera (3). If not master camera - it will wait for external triggers');
......@@ -3634,10 +3644,10 @@ DEFAULT_CONFIG
<VIGNET_SHL>"Additional shift left of the vignetting correction multiplied by digital gain. Default 1"</VIGNET_SHL>
<SCALE_ZERO_IN>"Will be subtracted from the 16-bit unsigned scaled sensor data before multiplying by vignetting correction and color balancing scale. It is a 17-bit signed data"</SCALE_ZERO_IN>
<SCALE_ZERO_OUT>"Will be added to the result of multiplication of the 16-bit sennsor data (with optionally subtracted SCALE_ZERO_IN) by color correction coefficient/vignetting correction coefficient"</SCALE_ZERO_OUT>
<DGAINR>"&quot;Digital gain&quot; for the red color channel - 17 bit unsigned value. Default value is 0x8000 fro 1.0, so up to 4X gain boost is available before saturation"</DGAINR>
<DGAING>"&quot;Digital gain&quot; for the green color channel - 17 bit unsigned value. Default value is 0x8000 fro 1.0, so up to 4X gain boost is available before saturation"</DGAING>
<DGAINGB>"&quot;Digital gain&quot; for second green color channel - 17 bit unsigned value. Default value is 0x8000 fro 1.0, so up to 4X gain boost is available before saturation"</DGAINGB>
<DGAINB>"&quot;Digital gain&quot; for the blue color channel - 17 bit unsigned value. Default value is 0x8000 fro 1.0, so up to 4X gain boost is available before saturation"</DGAINB>
<DGAINR>"&quot;Digital gain&quot; for the red color channel - 17 bit unsigned value. Default value is 0x8000 for 1.0, so up to 4X gain boost is available before saturation"</DGAINR>
<DGAING>"&quot;Digital gain&quot; for the green color channel - 17 bit unsigned value. Default value is 0x8000 for 1.0, so up to 4X gain boost is available before saturation"</DGAING>
<DGAINGB>"&quot;Digital gain&quot; for second green color channel - 17 bit unsigned value. Default value is 0x8000 for 1.0, so up to 4X gain boost is available before saturation"</DGAINGB>
<DGAINB>"&quot;Digital gain&quot; for the blue color channel - 17 bit unsigned value. Default value is 0x8000 for 1.0, so up to 4X gain boost is available before saturation"</DGAINB>
<CORING_PAGE>"Number of coring LUT page number. Current software programs only page 0 (of 8) using CORING_INDEX parameter."</CORING_PAGE>
<TILES>Number of 16x16 (20x20) tiles in a compressed frame (readonly)</TILES>
<SENSOR_PHASE>"Sensor port signals phase coarse: [1:0] - data 90 degree shift, [6,3:2] - HACT 90 degree (two periods), [5:4] - VACT 90 degree shift. Typical values for different cable lengths: 0x00, 0x15, 0x2a, 0x7f. Turn off autoexposure and white balance before adjusting. </SENSOR_PHASE>
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment