Skip to content

E
elphel-apps-autocampars
Commit 0fc43003 authored by Andrey Filippov's avatar Andrey Filippov
Browse files
Options

modifying autocampars.php to work with Eyesis too

parent f8a732f9
Show whitespace changes
Inline Side-by-side
Showing with 378 additions and 101 deletions
src/autocampars.php
View file @ 0fc43003
...@@ -189,7 +189,16 @@ date_default_timezone_set('UTC'); ...@@ -189,7 +189,16 @@ date_default_timezone_set('UTC');
$GLOBALS['VERSION'] = '___VERSION___'; $GLOBALS['VERSION'] = '___VERSION___';
$GLOBALS['SRCREV'] = '___SRCREV___'; $GLOBALS['SRCREV'] = '___SRCREV___';
$GLOBALS['LOG_MAX_ECHO'] = 100; //longest log message to be output to screen, not only logged $GLOBALS['LOG_MAX_ECHO'] = 100; //longest log message to be output to screen, not only logged
$GLOBALS['STATES']=array("BOOT","POWERED", "BITSTREAM", "SENSORS_DETECTED", "SENSORS_SYNCHRONIZED", "SENSORS_CONFIGURED"); $GLOBALS['STOP_AFTER']=array(
'BOOT' => true,
'POWERED' => true,
'BITSTREAM'=> true,
'SENSORS_DETECTED'=> true,
'SENSORS_SYNCHRONIZED'=>true,
'PARAMETERS_PRESET'=> true,
'SEQUENCERS_ADVANCED'=> true,
'INITIALIZED'=> true);
//$p = strpos ( $cvslog, "Revision" ); //$p = strpos ( $cvslog, "Revision" );
//$GLOBALS['version'] = strtok ( substr ( $cvslog, $p + strlen ( "Revision" ), 20 ), " " ); //$GLOBALS['version'] = strtok ( substr ( $cvslog, $p + strlen ( "Revision" ), 20 ), " " );
$GLOBALS['version'] = $GLOBALS['VERSION'];// echo "<pre>"; $GLOBALS['version'] = $GLOBALS['VERSION'];// echo "<pre>";
...@@ -203,11 +212,12 @@ $GLOBALS['sysfs_frame_seq'] = '/sys/devices/soc0/elphel393-framepars@0/this ...@@ -203,11 +212,12 @@ $GLOBALS['sysfs_frame_seq'] = '/sys/devices/soc0/elphel393-framepars@0/this
$GLOBALS['sysfs_chn_en'] = '/sys/devices/soc0/elphel393-framepars@0/chn_en'; //channels enable (o blocks frame sync pulses) $GLOBALS['sysfs_chn_en'] = '/sys/devices/soc0/elphel393-framepars@0/chn_en'; //channels enable (o blocks frame sync pulses)
$GLOBALS['sysfs_i2c_seq'] = '/sys/devices/soc0/elphel393-sensor-i2c@0/i2c_frame'; $GLOBALS['sysfs_i2c_seq'] = '/sys/devices/soc0/elphel393-sensor-i2c@0/i2c_frame';
$GLOBALS ['sensor_port'] = -1; // not specified $GLOBALS ['sensor_port'] = -1; // not specified
$GLOBALS['master_port'] = -1; // Master port is the lowest number of existing ports
if (array_key_exists ( 'sensor_port', $_GET )) { if (array_key_exists ( 'sensor_port', $_GET )) {
$GLOBALS ['sensor_port'] = (intval($_GET ['sensor_port'])) & 3; $GLOBALS ['sensor_port'] = (intval($_GET ['sensor_port'])) & 3;
} }
$GLOBALS ['ports'] = array(); // list of enabled ports $GLOBALS['ports'] = array(); // list of enabled ports
$GLOBALS['configPaths'] = array ("/etc/elphel393/autocampars0.xml", // should be a single line for parsedit.php $GLOBALS['configPaths'] = array ("/etc/elphel393/autocampars0.xml", // should be a single line for parsedit.php
"/etc/elphel393/autocampars1.xml", "/etc/elphel393/autocampars1.xml",
...@@ -248,18 +258,18 @@ log_open(); ...@@ -248,18 +258,18 @@ log_open();
get_application_mode(); // initializes state file (first time slow reading 10389 get_application_mode(); // initializes state file (first time slow reading 10389
$GLOBALS['camera_state'] = $GLOBALS['camera_state_arr']['state']; //$GLOBALS['camera_state'] = $GLOBALS['camera_state_arr']['state'];
if (! in_array ( $camera_state, $GLOBALS['STATES'] )) { if (! in_array ( $GLOBALS['camera_state_arr']['state'], array_keys($GLOBALS['STOP_AFTER']) )) {
log_error ( "Invalid camera state:" . $camera_state . ", valid states are:\n" . print_r ( $GLOBALS['STATES'], 1 )); log_error ( "Invalid camera state:" . $GLOBALS['camera_state_arr']['state'] . ", valid states are:\n" . print_r ( array_keys($GLOBALS['STOP_AFTER']), 1 ));
} }
log_msg("Processing camera state: " . $GLOBALS['camera_state']); log_msg("Processing camera state: " . $GLOBALS['camera_state_arr']['state']);
get_sysfs_sensors(); get_sysfs_sensors();
$GLOBALS['useDefaultPageNumber'] = 15; $GLOBALS['useDefaultPageNumber'] = 15;
$GLOBALS['protectedPage'] = 0; // / change to -1 to enable saving to page 0 $GLOBALS['protectedPage'] = 0; // / change to -1 to enable saving to page 0
///$needDetection = (elphel_get_P_value ( $GLOBALS ['sensor_port'], ELPHEL_SENSOR ) <= 0); // / we need sensor detection to be started before we can read 10359 eeprom and so select default parameters ///$needDetection = (elphel_get_P_value ( $GLOBALS ['sensor_port'], ELPHEL_SENSOR ) <= 0); // / we need sensor detection to be started before we can read 10359 eeprom and so select default parameters
if (($_GET ['load'] != '') && ($GLOBALS['sensor_port'] >=0) && ($GLOBALS['camera_state'] != 'BOOT')) { if (($_GET ['load'] != '') && ($GLOBALS['sensor_port'] >=0) && ($GLOBALS['camera_state_arr']['state'] != 'BOOT')) {
$load_filename = $_GET ['load']; $load_filename = $_GET ['load'];
if (is_file ( $load_filename )) { if (is_file ( $load_filename )) {
// load file // load file
...@@ -299,14 +309,14 @@ if (($_GET ['load'] != '') && ($GLOBALS['sensor_port'] >=0) && ($GLOBALS['camera ...@@ -299,14 +309,14 @@ if (($_GET ['load'] != '') && ($GLOBALS['sensor_port'] >=0) && ($GLOBALS['camera
} }
$init = false; $init = false;
$daemon = false; $daemon = false;
$initPage = $GLOBALS['useDefaultPageNumber']; $initPage = $GLOBALS['useDefaultPageNumber'];
//echo "=== Checking for 'new' or '--new', _SERVER ['argv']=".print_r( $_SERVER ['argv'],1).', $_GET='.print_r($_GET,1)."\n";
// For new - move current config (if any) out of the way
if ((array_key_exists ( 'new', $_GET )) || (in_array ( '--new', $_SERVER ['argv'] ))) { if ((array_key_exists ( 'new', $_GET )) || (in_array ( '--new', $_SERVER ['argv'] ))) {
// log_msg("rotating, _SERVER ['argv']=".print_r( $_SERVER ['argv'],1)); foreach ( $GLOBALS['ports'] as $port ) {
foreach ( $GLOBALS ['ports'] as $port ) {
log_msg ("Rotating configs for port $port"); log_msg ("Rotating configs for port $port");
if (file_exists ($GLOBALS['configPaths'][$port])) { if (file_exists ($GLOBALS['configPaths'][$port])) {
rotateConfig ($port, $GLOBALS['numBackups'] ); rotateConfig ($port, $GLOBALS['numBackups'] );
...@@ -314,38 +324,33 @@ if ((array_key_exists ( 'new', $_GET )) || (in_array ( '--new', $_SERVER ['argv' ...@@ -314,38 +324,33 @@ if ((array_key_exists ( 'new', $_GET )) || (in_array ( '--new', $_SERVER ['argv'
} }
} }
foreach ( $_SERVER ['argv'] as $param ) {
if (substr ( $param, 0, 6 ) == "--init") {
$init = true;
}
}
log_msg("get_eyesis_mode()->".get_eyesis_mode()); log_msg("get_eyesis_mode()->".get_eyesis_mode());
log_msg("get_mt9p006_mode()->".get_mt9p006_mode()); log_msg("get_mt9p006_mode()->".get_mt9p006_mode());
if (get_eyesis_mode()!=0){ if (get_eyesis_mode()!=0){ // sets ($GLOBALS ['eyesis_mode']
log_msg("+++ eyesis"); log_msg("+++ eyesis");
process_eyesis(); detect_eyesis();
} else if (get_mt9p006_mode ()!=0){ } else if (get_mt9p006_mode ()!=0){ // sets ($GLOBALS ['mt9p006_mode']
log_msg("+++ mt9p006"); log_msg("+++ mt9p006");
process_mt9p006(); if ($init) {
reset_mt9p006(); // will only do smth. if stage is already higher that after sensor detection
}
detect_mt9p006();
} }
// Todo: Add a single camera with 10359? // Todo: Add a single camera with 10359?
log_msg("sensors:\n".str_sensors($GLOBALS['sensors']),1); log_msg("sensors:\n".str_sensors($GLOBALS['sensors']),1);
//$GLOBALS ['sensor_port']
///+++++++++++++++++++++++++++++++++++++++++++++ ///+++++++++++++++++++++++++++++++++++++++++++++
if (0) { // nc353
if ($needDetection) { // sensor number is 0
if (! detectSensor ()) {
log_msg("Failed sensor detection");
log_close();
exit ( 1 );
}
$needDetection = false;
} else
$needDetection = true; // / if sensor was initialized before, it will need to be re-initialized in --init command
$eyesis_mode = 0;
$multisensor = file_exists ( $m10359Path );
if ($multisensor) // Create new configs if they do not exist (after sensor ports are detected)
$eyesis_mode = get_application_mode (); // / will create /var/volatile/state/ * foreach ( $GLOBALS['ports'] as $port ) {
}
foreach ( $GLOBALS ['ports'] as $port ) {
if (! file_exists ( $GLOBALS ['configPaths'] [$port] )) { if (! file_exists ( $GLOBALS ['configPaths'] [$port] )) {
$confFile = fopen ( $GLOBALS ['configPaths'] [$port], "w+" ); $confFile = fopen ( $GLOBALS ['configPaths'] [$port], "w+" );
fwrite ( $confFile, createDefaultConfig ( $GLOBALS['version'], $multisensor, $eyesis_mode ) ); // use multisensor defaults if 10359 +sensors present fwrite ( $confFile, createDefaultConfig ( $GLOBALS['version'], $multisensor, $eyesis_mode ) ); // use multisensor defaults if 10359 +sensors present
...@@ -357,6 +362,8 @@ foreach ( $GLOBALS ['ports'] as $port ) { ...@@ -357,6 +362,8 @@ foreach ( $GLOBALS ['ports'] as $port ) {
log_msg ( "autocampars.php parsed configuration file {$GLOBALS ['configPaths'] [$port]}."); log_msg ( "autocampars.php parsed configuration file {$GLOBALS ['configPaths'] [$port]}.");
} }
//
if ($_SERVER ['REQUEST_METHOD'] == "GET") { if ($_SERVER ['REQUEST_METHOD'] == "GET") {
processGet ($GLOBALS['sensor_port']); processGet ($GLOBALS['sensor_port']);
log_close(); log_close();
...@@ -368,17 +375,19 @@ if ($_SERVER ['REQUEST_METHOD'] == "GET") { ...@@ -368,17 +375,19 @@ if ($_SERVER ['REQUEST_METHOD'] == "GET") {
exit ( 0 ); exit ( 0 );
} else { } else {
$old_versions=array(); $old_versions=array();
foreach ( $GLOBALS ['ports'] as $port ) { foreach ( $GLOBALS['ports'] as $port ) {
update_minor_version($port, array_key_exists('--ignore-revision',$_SERVER ['argv'])?1:0); update_minor_version($port, array_key_exists('--ignore-revision',$_SERVER ['argv'])?1:0);
$old_versions[]=$GLOBALS['configs'][$port]['version']; $old_versions[]=$GLOBALS['configs'][$port]['version'];
} }
foreach ( $_SERVER ['argv'] as $param ) { foreach ( $_SERVER ['argv'] as $param ) {
if (substr ( $param, 0, 6 ) == "--init") { if (substr ( $param, 0, 6 ) == "--init") {
/* no support for '--init=page' (can be different for ports)
$param = substr ( $param, 7 ); $param = substr ( $param, 7 );
if (strlen ( $param ) > 0) if (strlen ( $param ) > 0)
$initPage = myval ( $param ); $initPage = myval ( $param );
if (($initPage < 0) || ($initPage > $GLOBALS['useDefaultPageNumber'])) if (($initPage < 0) || ($initPage > $GLOBALS['useDefaultPageNumber']))
$initPage = $GLOBALS['useDefaultPageNumber']; $initPage = $GLOBALS['useDefaultPageNumber'];
*/
$init = true; $init = true;
} else if (substr ( $param, 0, 8 ) == "--daemon") { // should have port? } else if (substr ( $param, 0, 8 ) == "--daemon") { // should have port?
$daemon = true; $daemon = true;
...@@ -386,7 +395,7 @@ if ($_SERVER ['REQUEST_METHOD'] == "GET") { ...@@ -386,7 +395,7 @@ if ($_SERVER ['REQUEST_METHOD'] == "GET") {
$GLOBALS['sensor_port']=intval(substr ( $param, 14, 1 )); $GLOBALS['sensor_port']=intval(substr ( $param, 14, 1 ));
} else if ($param == '--ignore-revision') { } else if ($param == '--ignore-revision') {
//get_port_index($port) //get_port_index($port)
foreach ( $GLOBALS ['ports'] as $port ) { foreach ( $GLOBALS['ports'] as $port ) {
$GLOBALS['configs'][$port]['version'] = $GLOBALS['version']; $GLOBALS['configs'][$port]['version'] = $GLOBALS['version'];
log_msg("processPost($port) --ignore_revision"); log_msg("processPost($port) --ignore_revision");
...@@ -417,7 +426,7 @@ USAGE; ...@@ -417,7 +426,7 @@ USAGE;
foreach ( $GLOBALS ['ports'] as $port ) { foreach ( $GLOBALS['ports'] as $port ) {
$old_version = $old_versions[get_port_index($port)]; $old_version = $old_versions[get_port_index($port)];
if ($GLOBALS['version'] != $old_version) { // issue warning if mismatch, but may continue if ($GLOBALS['version'] != $old_version) { // issue warning if mismatch, but may continue
$severity = ($GLOBALS['version'] != $GLOBALS['configs'][$port]['version'])?"ERROR":"WARNING"; $severity = ($GLOBALS['version'] != $GLOBALS['configs'][$port]['version'])?"ERROR":"WARNING";
...@@ -449,16 +458,29 @@ WARN; ...@@ -449,16 +458,29 @@ WARN;
} }
} }
if ($init) { if ($init) {
$page = processInit ( $initPage, $needDetection ); log_msg ( "GLOBALS['eyesis_mode']= >".$GLOBALS['eyesis_mode']."<");
if ($page < 0) { log_msg ( "GLOBALS['mt9p006_mode']= >".$GLOBALS['mt9p006_mode']."<");
log_msg ( "Sensor failed to initialize, see $logFilePath for detailes" );
if (array_key_exists('eyesis_mode',$GLOBALS)) {
log_msg("+++ eyesis");
init_eyesis();
} else if (array_key_exists('mt9p006_mode',$GLOBALS)){ // sets ($GLOBALS ['mt9p006_mode']
log_msg("+++ mt9p006");
init_mt9p006();
}
if ($GLOBALS['camera_state_arr']['state'] != 'INITIALIZED') {
log_msg ( "Camera failed to initialize, see $logFilePath for detailes" );
log_msg ( "Camera state = ".$GLOBALS['camera_state_arr']['state'] );
log_close (); log_close ();
exit ( 1 ); exit ( 1 );
} else { } else {
$port_list_string = implode ( ", ", $GLOBALS ['ports'] ); $port_list_string = implode ( ", ", $GLOBALS['ports'] );
$page_list_string = implode ( ", ", $page ); // $page_list_string = implode ( ", ", $page );
log_msg ( "Sensors on ports: $port_list_string were successfully initialized from configuration files pages $page_list_string", 1 ); // log_msg ( "Sensors on ports: $port_list_string were successfully initialized from configuration files pages $page_list_string", 1 );
log_msg ( "Sensors on ports: $port_list_string were successfully initialized", 1 );
} }
if ($GLOBALS ['version'] != $GLOBALS ['configs'] [$port] ['version']) { if ($GLOBALS ['version'] != $GLOBALS ['configs'] [$port] ['version']) {
log_close (); log_close ();
exit ( 1 ); exit ( 1 );
...@@ -467,6 +489,7 @@ if ($init) { ...@@ -467,6 +489,7 @@ if ($init) {
log_close (); log_close ();
exit ( 0 ); exit ( 0 );
} }
if ($daemon) { if ($daemon) {
processDaemon ( $GLOBALS ['sensor_port'] ); processDaemon ( $GLOBALS ['sensor_port'] );
log_close (); log_close ();
...@@ -498,12 +521,12 @@ function update_minor_version($port, $silent = 0) { ...@@ -498,12 +521,12 @@ function update_minor_version($port, $silent = 0) {
function get_port_index($port){ function get_port_index($port){
for ($i = 0; $i < count($GLOBALS ['ports']); $i++) if ( $GLOBALS ['ports'][$i] == $port ) return $i; for ($i = 0; $i < count($GLOBALS['ports']); $i++) if ( $GLOBALS['ports'][$i] == $port ) return $i;
return -1; return -1;
} }
function process_eyesis(){ function detect_eyesis(){
log_msg("process_eyesis()"); log_msg("detect_eyesis()");
} }
function str_sensors($sens_arr){ function str_sensors($sens_arr){
...@@ -511,18 +534,76 @@ function str_sensors($sens_arr){ ...@@ -511,18 +534,76 @@ function str_sensors($sens_arr){
foreach ($sens_arr as $port=>$subchn) $sports[]=$port.': '.implode(", ",$subchn); foreach ($sens_arr as $port=>$subchn) $sports[]=$port.': '.implode(", ",$subchn);
return implode("\n",$sports); return implode("\n",$sports);
} }
function process_mt9p006(){
/** Prepare camera to be re-initialized if 'init' mode is set and stage is later than that*/
function reset_mt9p006(){
switch ($GLOBALS['camera_state_arr']['state']){
case "BOOT":
case "POWERED":
case "BITSTREAM":
// Keep these too?
case "SENSORS_DETECTED":
case "SENSORS_SYNCHRONIZED":
case "PARAMETERS_PRESET":
case "SEQUENCERS_ADVANCED":
return; // do nothing just continue
default: // later stage, need resetting
// See if any daemons are running
$waitDaemons = 5.0; // / Wait for daemons to stop (when disabled) before resetting frame number.
// / They should look at thei enable bit periodically and restart if the frame is
// / the frame is not what they were expecting to be
if (elphel_get_frame ( $GLOBALS['master_port'] ) > 16) { // =1 after initialization
log_msg ( "Current frame on master port =" . elphel_get_frame ( $GLOBALS ['master_port'] ) . ", sleeping to give daemons a chance");
elphel_set_P_value ( $GLOBALS ['master_port'], ELPHEL_COMPRESSOR_RUN, 0x00, 0, ELPHEL_CONST_FRAMEPAIR_FORCE_NEWPROC ); // / turn compressor off
foreach ($GLOBALS['ports'] as $port) {
elphel_set_P_value ( $port, ELPHEL_DAEMON_EN, 0x00, 0, ELPHEL_CONST_FRAMEPAIR_FORCE_NEWPROC ); // / turn daemons off
}
usleep ( $waitDaemons * 1000000 );
log_msg("Current frame on master port =" . elphel_get_frame ( $GLOBALS ['master_port'] ) . ", waking up, daemons should be dead already");
}
log_msg("after reset - current frame on master port =" . elphel_get_frame ( $GLOBALS ['master_port'] ));
// Stop compressor if it was running (daemons are already stopped)
if (elphel_get_P_value ( $port, ELPHEL_COMPRESSOR_RUN ) || elphel_get_P_value ( $port, ELPHEL_DAEMON_EN )) {
$frame_to_set += ELPHEL_CONST_FRAME_DEAFAULT_AHEAD;
// Should we stop sequencers?
elphel_set_P_arr ( $port, array (
'COMPRESSOR_RUN' => 0,
'SENSOR_RUN' => 0,
'DAEMON_EN' => 0
), $frame_to_set, ELPHEL_CONST_FRAMEPAIR_FORCE_NEWPROC ); // was -1 ("this frame")
// advance frames, so next settings will be ASAP (sent immediate, not limited to 64?)
for ($i = 0; $i< ELPHEL_CONST_FRAME_DEAFAULT_AHEAD; $i++){
// Single trigger
elphel_set_P_value ( $GLOBALS['master_port'], ELPHEL_TRIG_PERIOD, 1, ELPHEL_CONST_FRAME_IMMED, ELPHEL_CONST_FRAMEPAIR_FORCE_NEWPROC);
usleep ($GLOBALS['camera_state_arr']['max_frame_time']); // > 1 frame, so all channels will get trigger parameters? 3 2 2 1 -> 4 3 3 2
}
}
$GLOBALS['camera_state_arr']['state'] ='BITSTREAM';
write_php_ini ($GLOBALS['camera_state_arr'], $GLOBALS['camera_state_path'] );
log_msg("Reset camera state to ". $GLOBALS['camera_state_arr']['state']);
}
}
// First stage of initialization, includes sensor detection (so only existing ports will be initialized)
// Will do nothing if already detected
// Advances state after successful steps
function detect_mt9p006(){
$max_frame_time = 100000; // usec, should exceed longest initial free frame period $max_frame_time = 100000; // usec, should exceed longest initial free frame period
$GLOBALS['camera_state_arr']['max_frame_time'] = 100000; // usec, should exceed longest initial free frame period $GLOBALS['camera_state_arr']['max_frame_time'] = 100000; // usec, should exceed longest initial free frame period
$GLOBALS['camera_state_arr']['max_latency'] = 5; // frames to manually advance $GLOBALS['camera_state_arr']['max_latency'] = 5; // frames to manually advance
write_php_ini ($GLOBALS['camera_state_arr'], $GLOBALS['camera_state_path'] ); write_php_ini ($GLOBALS['camera_state_arr'], $GLOBALS['camera_state_path'] );
$sensor_code = 52; $sensor_code = 52;
log_msg("process_mt9p006():\n".str_sensors($GLOBALS['sensors']),1); log_msg("detect_mt9p006():\n".str_sensors($GLOBALS['sensors']),1);
$GLOBALS ['ports'] = array(); // list of enabled ports $GLOBALS['ports'] = array(); // list of enabled ports
for ($port=0; $port < 4; $port++) if ($GLOBALS['sensors'][$port][0] == 'mt9p006') $GLOBALS ['ports'][] = $port; for ($port=0; $port < 4; $port++) if ($GLOBALS['sensors'][$port][0] == 'mt9p006') $GLOBALS['ports'][] = $port;
log_msg("ports:". implode(", ",$GLOBALS['ports'])); log_msg("ports:". implode(", ",$GLOBALS['ports']));
switch ($GLOBALS['camera_state']){ switch ($GLOBALS['camera_state_arr']['state']){
/* /*
case "BOOT": case "BOOT":
echo "boot\n"; echo "boot\n";
...@@ -549,7 +630,6 @@ function process_mt9p006(){ ...@@ -549,7 +630,6 @@ function process_mt9p006(){
// correct sysfs sensor data // correct sysfs sensor data
$sensor_mask = get_mt9p006_mode (); $sensor_mask = get_mt9p006_mode ();
$needupdate=0; $needupdate=0;
// for ($port=0; $port < 4; $port++) if (($sensor_mask & (1 << $port)) ==0) {
foreach ($GLOBALS['ports'] as $port) if (($sensor_mask & (1 << $port)) ==0) { foreach ($GLOBALS['ports'] as $port) if (($sensor_mask & (1 << $port)) ==0) {
$GLOBALS['sensors'][$port][0] = 'none'; $GLOBALS['sensors'][$port][0] = 'none';
$needupdate=1; $needupdate=1;
...@@ -562,13 +642,11 @@ function process_mt9p006(){ ...@@ -562,13 +642,11 @@ function process_mt9p006(){
write_php_ini ($GLOBALS['camera_state_arr'], $GLOBALS['camera_state_path'] ); write_php_ini ($GLOBALS['camera_state_arr'], $GLOBALS['camera_state_path'] );
log_msg("COMMAND_OUTPUT for 'autocampars.py localhost py393 hargs-power_par12':\n". log_msg("COMMAND_OUTPUT for 'autocampars.py localhost py393 hargs-power_par12':\n".
print_r($output,1)."\ncommand return value=".$retval."\n"); print_r($output,1)."\ncommand return value=".$retval."\n");
// No break here if ($GLOBALS['STOP_AFTER'][$GLOBALS['camera_state_arr']['state']]) break;
case "BITSTREAM": case "BITSTREAM":
$frame_nums=array(-1,-1,-1,-1); $frame_nums=array(-1,-1,-1,-1);
$GLOBALS['master_port'] =-1; $GLOBALS['master_port'] =-1;
// Open files for only enabled channels // Open files for only enabled channels
// for ($port=0; $port < 4; $port++) if ($GLOBALS['sensors'][$port][0] == 'mt9p006') {
foreach ($GLOBALS['ports'] as $port) { foreach ($GLOBALS['ports'] as $port) {
$f = fopen ( $GLOBALS ['framepars_paths'] [$port], "w+"); $f = fopen ( $GLOBALS ['framepars_paths'] [$port], "w+");
if ($GLOBALS['master_port'] < 0) $GLOBALS['master_port'] = $port; if ($GLOBALS['master_port'] < 0) $GLOBALS['master_port'] = $port;
...@@ -578,7 +656,6 @@ function process_mt9p006(){ ...@@ -578,7 +656,6 @@ function process_mt9p006(){
fclose($f); fclose($f);
} }
$needupdate=0; $needupdate=0;
// for ($port=0; $port < 4; $port++) if ($GLOBALS['sensors'][$port][0] == 'mt9p006') {
foreach ($GLOBALS['ports'] as $port) { foreach ($GLOBALS['ports'] as $port) {
if (elphel_get_P_value ( $port, ELPHEL_SENSOR) != $sensor_code){ if (elphel_get_P_value ( $port, ELPHEL_SENSOR) != $sensor_code){
log_msg("#### Wrong/missing sensor on port ".$port.", code=".elphel_get_P_value ( $port, ELPHEL_SENSOR). log_msg("#### Wrong/missing sensor on port ".$port.", code=".elphel_get_P_value ( $port, ELPHEL_SENSOR).
...@@ -592,9 +669,9 @@ function process_mt9p006(){ ...@@ -592,9 +669,9 @@ function process_mt9p006(){
$GLOBALS['camera_state_arr']['state'] ='SENSORS_DETECTED'; $GLOBALS['camera_state_arr']['state'] ='SENSORS_DETECTED';
write_php_ini ($GLOBALS['camera_state_arr'], $GLOBALS['camera_state_path'] ); write_php_ini ($GLOBALS['camera_state_arr'], $GLOBALS['camera_state_path'] );
log_msg('Reached state: '. $GLOBALS['camera_state_arr']['state']); log_msg('Reached state: '. $GLOBALS['camera_state_arr']['state']);
if ($GLOBALS['STOP_AFTER'][$GLOBALS['camera_state_arr']['state']]) break;
case "SENSORS_DETECTED": case "SENSORS_DETECTED":
// Program trigger modes (inactive), stop and reset command sequencers // Program trigger modes (inactive), stop and reset command sequencers
// for ($port=0; $port < 4; $port++) if ($GLOBALS['sensors'][$port][0] == 'mt9p006') {
foreach ($GLOBALS['ports'] as $port) { foreach ($GLOBALS['ports'] as $port) {
if ($port==$GLOBALS['master_port']){ if ($port==$GLOBALS['master_port']){
elphel_set_P_value ( $port, ELPHEL_TRIG_MASTER, $GLOBALS['master_port'], ELPHEL_CONST_FRAME_IMMED); elphel_set_P_value ( $port, ELPHEL_TRIG_MASTER, $GLOBALS['master_port'], ELPHEL_CONST_FRAME_IMMED);
...@@ -608,7 +685,6 @@ function process_mt9p006(){ ...@@ -608,7 +685,6 @@ function process_mt9p006(){
elphel_set_P_value ( $port, ELPHEL_TRIG_DELAY, 0, ELPHEL_CONST_FRAME_IMMED); elphel_set_P_value ( $port, ELPHEL_TRIG_DELAY, 0, ELPHEL_CONST_FRAME_IMMED);
} }
usleep ($GLOBALS['camera_state_arr']['max_frame_time']); // > 1 frame, so all channels will get trigger parameters? //1 1 0 0 -> 3 2 2 1 usleep ($GLOBALS['camera_state_arr']['max_frame_time']); // > 1 frame, so all channels will get trigger parameters? //1 1 0 0 -> 3 2 2 1
// for ($port=0; $port < 4; $port++) if ($GLOBALS['sensors'][$port][0] == 'mt9p006') {
foreach ($GLOBALS['ports'] as $port) { foreach ($GLOBALS['ports'] as $port) {
elphel_set_P_value ( $port, ELPHEL_TRIG, ELPHEL_CONST_TRIGMODE_SNAPSHOT, ELPHEL_CONST_FRAME_IMMED); elphel_set_P_value ( $port, ELPHEL_TRIG, ELPHEL_CONST_TRIGMODE_SNAPSHOT, ELPHEL_CONST_FRAME_IMMED);
} }
...@@ -620,7 +696,6 @@ function process_mt9p006(){ ...@@ -620,7 +696,6 @@ function process_mt9p006(){
for ($port=0; $port < 4; $port++){ for ($port=0; $port < 4; $port++){
$f = fopen ( $GLOBALS['sysfs_frame_seq'].$port, 'w' ); fwrite($f,'0',1); fclose ( $f ); $f = fopen ( $GLOBALS['sysfs_frame_seq'].$port, 'w' ); fwrite($f,'0',1); fclose ( $f );
$f = fopen ( $GLOBALS['sysfs_i2c_seq'].$port, 'w' ); fwrite($f,'3',1); fclose ( $f ); // reset+run (copy frame number from frame_seq) $f = fopen ( $GLOBALS['sysfs_i2c_seq'].$port, 'w' ); fwrite($f,'3',1); fclose ( $f ); // reset+run (copy frame number from frame_seq)
// if ($GLOBALS['sensors'][$port][0] != 'mt9p006') {
if (!in_array($port, $GLOBALS['ports'])) { if (!in_array($port, $GLOBALS['ports'])) {
log_msg("Disabling sensor port ".$port); log_msg("Disabling sensor port ".$port);
$f = fopen ( $GLOBALS['sysfs_chn_en'].$port, 'w' ); fwrite($f,'0',1); fclose ( $f ); // disable sensor channel $f = fopen ( $GLOBALS['sysfs_chn_en'].$port, 'w' ); fwrite($f,'0',1); fclose ( $f ); // disable sensor channel
...@@ -634,21 +709,159 @@ function process_mt9p006(){ ...@@ -634,21 +709,159 @@ function process_mt9p006(){
write_php_ini ($GLOBALS['camera_state_arr'], $GLOBALS['camera_state_path'] ); write_php_ini ($GLOBALS['camera_state_arr'], $GLOBALS['camera_state_path'] );
log_msg('Frames: '. implode(", ",$frame_nums)); log_msg('Frames: '. implode(", ",$frame_nums));
log_msg('Reached state: '. $GLOBALS['camera_state_arr']['state']); log_msg('Reached state: '. $GLOBALS['camera_state_arr']['state']);
case "SENSORS_SYNCHRONIZED": if ($GLOBALS['STOP_AFTER'][$GLOBALS['camera_state_arr']['state']]) break; // will break anyway
// set most initial parameters in ASAP mode, then sequencer ones, apply certain number of pulses to advance sequencer, then set trigger mode
// (repetitive, free running, ...)
// + Or just apply all parameters through the sequencer and apply certain number of pulses?
break;
default: default:
log_msg("camera_state=".$GLOBALS['camera_state']); log_msg("camera_state=".$GLOBALS['camera_state_arr']['state']);
} }
log_msg("ports:". implode(", ",$GLOBALS['ports'])); log_msg("ports:". implode(", ",$GLOBALS['ports']));
} }
// to re-init daemons should be stopped and other re-init actions performed before calling
// Sensors and compressors, daemons should be stopped
// State should be reset appropriately too
function init_eyesis(){ // $page) { init can only be from default page as page numbers can be different per-port
}
function init_mt9p006(){ // $page) { init can only be from default page as page numbers can be different per-port
log_msg("init_mt9p006($page) start: camera_state=".$GLOBALS['camera_state_arr']['state']);
$mask = 1; // init parameters
$trig_par_names = array('TRIG', 'TRIG_PERIOD', 'TRIG_CONDITION', 'TRIG_MASTER');
$delayed_par_names = array('COMPRESSOR_RUN', 'SENSOR_RUN', 'DAEMON_EN',
'DAEMON_EN_AUTOEXPOSURE', 'DAEMON_EN_STREAMER',
'DAEMON_EN_CCAMFTP','DAEMON_EN_CAMOGM', 'DAEMON_EN_TEMPERATURE');
foreach ($trig_par_names as $trig){
$delayed_par_names[] = $trig;
}
switch ($GLOBALS['camera_state_arr']['state']){
case "SENSORS_SYNCHRONIZED":
case "SEQUENCERS_ADVANCED":
$port_page=array();
foreach ( $GLOBALS['ports'] as $port ) {
$port_page[$port] = $GLOBALS ['configs'] [$port] ['defaultPage'];
}
$all_port_pars = getMaskedPars($port_page, $mask);
}
switch ($GLOBALS['camera_state_arr']['state']){
case "SENSORS_SYNCHRONIZED":
// Set most parameters in immediate mode (to protect from i2c 64-command overflow),
// then others through the sequencers while sesnor is stopped (waiting for manual triggers)
$all_parToSet = filterParsKeepRemove($all_port_pars, $delayed_par_names, false ); // remove listed parameters
addGammas ( $all_parToSet); // collect gamma-related parameters for all ports and program tables (common for all ports)
$all_parLater = filterParsKeepRemove($all_port_pars, $delayed_par_names, true ); // keep listed parameters
foreach ( $GLOBALS['ports'] as $port ) {
if (!isset($all_parLater[$port]['SENSOR_RUN'])) $all_parLater[$port]['SENSOR_RUN'] = 2;
if (!isset($all_parLater[$port]['COMPRESSOR_RUN'])) $all_parLater[$port]['COMPRESSOR_RUN'] = 2;
if (isset ($all_parLater[$port]['DAEMON_EN'] )) { // 'DAEMON_EN' has prfececdence over individual bits
$daemon_en=$all_parLater[$port]['DAEMON_EN'];
$all_parLater[$port]['DAEMON_EN_AUTOEXPOSURE'] = ($daemon_en >> ELPHEL_CONST_DAEMON_BIT_AUTOEXPOSURE) & 1;
$all_parLater[$port]['DAEMON_EN_STREAMER'] = ($daemon_en >> ELPHEL_CONST_DAEMON_BIT_STREAMER) & 1;
$all_parLater[$port]['DAEMON_EN_CCAMFTP'] = ($daemon_en >> ELPHEL_CONST_DAEMON_BIT_CCAMFTP) & 1;
$all_parLater[$port]['DAEMON_EN_CAMOGM'] = ($daemon_en >> ELPHEL_CONST_DAEMON_BIT_CAMOGM) & 1;
$all_parLater[$port]['DAEMON_EN_AUTOCAMPARS'] = ($daemon_en >> ELPHEL_CONST_DAEMON_BIT_AUTOCAMPARS) & 1;
$all_parLater[$port]['DAEMON_EN_TEMPERATURE'] = ($daemon_en >> ELPHEL_CONST_DAEMON_BIT_TEMPERATURE) & 1;
}
if (!isset($all_parLater[$port]['DAEMON_EN_AUTOEXPOSURE'])) $all_parLater[$port]['DAEMON_EN_AUTOEXPOSURE'] = 1;
if (!isset($all_parLater[$port]['DAEMON_EN_STREAMER'])) $all_parLater[$port]['DAEMON_EN_STREAMER'] = 1;
if (!isset($all_parLater[$port]['DAEMON_EN_CCAMFTP'])) $all_parLater[$port]['DAEMON_EN_CCAMFTP'] = 0;
if (!isset($all_parLater[$port]['DAEMON_EN_CAMOGM'])) $all_parLater[$port]['DAEMON_EN_CAMOGM'] = 0;
if (!isset($all_parLater[$port]['DAEMON_EN_AUTOCAMPARS'])) $all_parLater[$port]['DAEMON_EN_AUTOCAMPARS'] = 0;
if (!isset($all_parLater[$port]['DAEMON_EN_TEMPERATURE'])) $all_parLater[$port]['DAEMON_EN_TEMPERATURE'] = 0;
$all_parLater[$port]['DAEMON_EN']=
(($all_parLater[$port]['DAEMON_EN_AUTOEXPOSURE'] & 1) << ELPHEL_CONST_DAEMON_BIT_AUTOEXPOSURE) |
(($all_parLater[$port]['DAEMON_EN_STREAMER'] & 1) << ELPHEL_CONST_DAEMON_BIT_STREAMER) |
(($all_parLater[$port]['DAEMON_EN_CCAMFTP'] & 1) << ELPHEL_CONST_DAEMON_BIT_CCAMFTP) |
(($all_parLater[$port]['DAEMON_EN_CAMOGM'] & 1) << ELPHEL_CONST_DAEMON_BIT_CAMOGM) |
(($all_parLater[$port]['DAEMON_EN_AUTOCAMPARS'] & 1) << ELPHEL_CONST_DAEMON_BIT_AUTOCAMPARS) |
(($all_parLater[$port]['DAEMON_EN_TEMPERATURE'] & 1) << ELPHEL_CONST_DAEMON_BIT_TEMPERATURE);
unset ($all_parLater[$port]['DAEMON_EN_AUTOEXPOSURE']);
unset ($all_parLater[$port]['DAEMON_EN_STREAMER']);
unset ($all_parLater[$port]['DAEMON_EN_CCAMFTP']);
unset ($all_parLater[$port]['DAEMON_EN_CAMOGM']);
unset ($all_parLater[$port]['DAEMON_EN_AUTOCAMPARS']);
unset ($all_parLater[$port]['DAEMON_EN_TEMPERATURE']);
}
$all_sensor_run = filterParsKeepRemove($all_parLater, array('SENSOR_RUN'), true ); // just per-port SENSOR_RUN value
$all_compressor_run = filterParsKeepRemove($all_parLater, array('COMPRESSOR_RUN'), true ); // just per-port COMPRESSOR_RUN value
$all_daemon_en = filterParsKeepRemove($all_parLater, array('DAEMON_EN'), true ); // just per-port DAEMON_EN value
$all_trig = filterParsKeepRemove($all_parLater, $trig_par_names, true ); // just per-port DAEMON_EN value
foreach ( $GLOBALS['ports'] as $port ) {
$frame_to_set = elphel_get_frame ( $GLOBALS ['master_port'] ) + 0; // ELPHEL_CONST_FRAME_DEAFAULT_AHEAD;
log_msg ( "port ".$port. " \$frame_to_set=".$frame_to_set.", now= " . elphel_get_frame ( $GLOBALS ['master_port']));
log_msg ( "port ".$port. " setting @".$frame_to_set.": " .print_r($all_parToSet[$port],1));
// set all in ASAP mode
elphel_set_P_arr ( $port, $all_parToSet[$port], $frame_to_set, ELPHEL_CONST_FRAMEPAIR_FORCE_NEWPROC );
$frame_to_set += 2;
log_msg ( "port ".$port. " setting @".$frame_to_set." SENSOR_RUN= " . $all_sensor_run[$port]['SENSOR_RUN']);
elphel_set_P_arr ( $port,$all_sensor_run[$port], $frame_to_set, ELPHEL_CONST_FRAMEPAIR_FORCE_NEWPROC );
$frame_to_set += 2;
log_msg ( "port ".$port. " setting @".$frame_to_set." COMPRESSOR_RUN= " . $all_compressor_run[$port]['COMPRESSOR_RUN']);
elphel_set_P_arr ( $port, $all_compressor_run[$port], $frame_to_set, ELPHEL_CONST_FRAMEPAIR_FORCE_NEWPROC );
$frame_to_set += 4; // /Adjust? So streamer will have at least 2 good frames in buffer?
log_msg ( "port ".$port. " setting @".$frame_to_set." DAEMON_EN= " . $all_daemon_en[$port]['DAEMON_EN']);
elphel_set_P_arr ( $port, $all_daemon_en[$port], $frame_to_set, ELPHEL_CONST_FRAMEPAIR_FORCE_NEWPROC );
$frame_to_set += 1;
$all_trig[$port]['TRIG_PERIOD'] = 0; // just in case, most likely not needed
log_msg ("port ".$port. " setting @".$frame_to_set." delayed trigger parameters= " . print_r ($all_trig[$port], 1 ) );
elphel_set_P_arr ( $port, $all_trig[$port], $frame_to_set, ELPHEL_CONST_FRAMEPAIR_FORCE_NEWPROC );
// $pages[]=$page;
}
$numSkip=$frame_to_set-elphel_get_frame($GLOBALS['master_port'])+1; // +1 - to be safe?
$GLOBALS['camera_state_arr']['frames_skip'] = $numSkip;
$GLOBALS['camera_state_arr']['state'] ='PARAMETERS_PRESET';
write_php_ini ($GLOBALS['camera_state_arr'], $GLOBALS['camera_state_path'] );
log_msg("will need to skip ".$GLOBALS['camera_state_arr']['frames_skip'].' frames');
log_msg("reached state ".$GLOBALS['camera_state_arr']['state']);
if ($GLOBALS['STOP_AFTER'][$GLOBALS['camera_state_arr']['state']]) break;
case "PARAMETERS_PRESET":
log_msg("Skipping ".$GLOBALS['camera_state_arr']['frames_skip']." frames");
for ($i = 0; $i< $GLOBALS['camera_state_arr']['frames_skip']; $i++){
// Single trigger
elphel_set_P_value ( $GLOBALS['master_port'], ELPHEL_TRIG_PERIOD, 1, ELPHEL_CONST_FRAME_IMMED, ELPHEL_CONST_FRAMEPAIR_FORCE_NEWPROC);
usleep ($GLOBALS['camera_state_arr']['max_frame_time']); // > 1 frame, so all channels will get trigger parameters? 3 2 2 1 -> 4 3 3 2
}
unset($GLOBALS['camera_state_arr']['frames_skip']);
$GLOBALS['camera_state_arr']['state'] ='SEQUENCERS_ADVANCED';
write_php_ini ($GLOBALS['camera_state_arr'], $GLOBALS['camera_state_path'] );
log_msg("reached state ".$GLOBALS['camera_state_arr']['state']);
if ($GLOBALS['STOP_AFTER'][$GLOBALS['camera_state_arr']['state']]) break;
case "SEQUENCERS_ADVANCED": // now set periodic trigger (if needed) in immediate mode - FPGA period will be overwritten
// by single-pulse advances
$port_page=array();
foreach ( $GLOBALS['ports'] as $port ) {
$port_page[$port] = $GLOBALS ['configs'] [$port] ['defaultPage'];
}
$all_port_pars = getMaskedPars($port_page, $mask);
// log_msg("all_port_pars[0]=".print_r($all_port_pars[$GLOBALS['master_port']],1));
if (array_key_exists('TRIG_PERIOD',$all_port_pars[$GLOBALS['master_port']])){
log_msg("Setting frame period to ".($all_port_pars[$GLOBALS['master_port']]['TRIG_PERIOD']/100000000.0)." s");
log_msg("Setting frame period to ".($all_port_pars[$GLOBALS['master_port']]['TRIG_PERIOD'])." x 10ns");
elphel_set_P_value ( $GLOBALS['master_port'],
ELPHEL_TRIG_PERIOD,
$all_port_pars[$GLOBALS['master_port']]['TRIG_PERIOD'],
ELPHEL_CONST_FRAME_IMMED,
ELPHEL_CONST_FRAMEPAIR_FORCE_NEWPROC);
}
$GLOBALS['camera_state_arr']['state'] ='INITIALIZED';
write_php_ini ($GLOBALS['camera_state_arr'], $GLOBALS['camera_state_path'] );
log_msg("reached state ".$GLOBALS['camera_state_arr']['state']);
if ($GLOBALS['STOP_AFTER'][$GLOBALS['camera_state_arr']['state']]) break;
default:
log_msg("init_mt9p006($page): camera_state=".$GLOBALS['camera_state_arr']['state']);
}
}
/** Read sensor types per port, per subchannel from sysfs*/ /** Read sensor types per port, per subchannel from sysfs*/
function get_sysfs_sensors() function get_sysfs_sensors()
{ {
$GLOBALS ['ports'] = array(); // list of enabled ports $GLOBALS['ports'] = array(); // list of enabled ports
$GLOBALS['sensors']=array('none','none','none','none'); $GLOBALS['sensors']=array('none','none','none','none');
for ($port = 0; $port < 4; $port++){ for ($port = 0; $port < 4; $port++){
$GLOBALS['sensors'][$port] = array('none','none','none','none'); $GLOBALS['sensors'][$port] = array('none','none','none','none');
...@@ -657,16 +870,23 @@ function get_sysfs_sensors() ...@@ -657,16 +870,23 @@ function get_sysfs_sensors()
} }
} }
for ($port=0; $port < 4; $port++) if ($GLOBALS['sensors'][$port][0] != 'none') $GLOBALS ['ports'][] = $port; for ($port=0; $port < 4; $port++) if ($GLOBALS['sensors'][$port][0] != 'none') {
$GLOBALS['ports'][] = $port;
}
// Master port is the lowest number of existing ports
for ($port=0; $port < 4; $port++) if ($GLOBALS['sensors'][$port][0] != 'none') {
$GLOBALS['master_port'] = $port;
break;
}
} }
/** Update sensor types per port, per subchannel to sysfs (after detection or 10389 EEPROM mask */ /** Update sensor types per port, per subchannel to sysfs (after detection or 10389 EEPROM mask */
function update_sysfs_sensors() function update_sysfs_sensors()
{ {
$GLOBALS ['ports'] = array(); // list of enabled ports $GLOBALS['ports'] = array(); // list of enabled ports
for ($port=0; $port < 4; $port++){ for ($port=0; $port < 4; $port++){
log_msg('port='.$port.' GLOBALS[sensors][port][0]='.$GLOBALS['sensors'][$port][0]); log_msg('port='.$port.' GLOBALS[sensors][port][0]='.$GLOBALS['sensors'][$port][0]);
if ($GLOBALS['sensors'][$port][0] != 'none') $GLOBALS ['ports'][] = $port; if ($GLOBALS['sensors'][$port][0] != 'none') $GLOBALS['ports'][] = $port;
} }
for ($port=0; $port < 4; $port++){ for ($port=0; $port < 4; $port++){
...@@ -678,11 +898,6 @@ function update_sysfs_sensors() ...@@ -678,11 +898,6 @@ function update_sysfs_sensors()
} }
} }
/*
$GLOBALS['STATES']=array("BOOT","POWERED", "BITSTREAM", "SENSORS_DETECTED", "SENSORS_SYNCHRONIZED", "SENSORS_CONFIGURED");
*/
function log_open(){ function log_open(){
$GLOBALS['logFile'] = fopen ( $GLOBALS['logFilePath'], "a" ); $GLOBALS['logFile'] = fopen ( $GLOBALS['logFilePath'], "a" );
...@@ -846,17 +1061,42 @@ function get_mt9p006_mode() { ...@@ -846,17 +1061,42 @@ function get_mt9p006_mode() {
// var_dump($csa); // var_dump($csa);
if ($csa['application'] == 'MT9P006') { if ($csa['application'] == 'MT9P006') {
$mode = intval($csa['mode']); $mode = intval($csa['mode']);
$GLOBALS ['mt9p006_mode'] = $mode;
$GLOBALS['STOP_AFTER']=array(
'BOOT' => false,
'POWERED' => false,
'BITSTREAM'=> false,
'SENSORS_DETECTED'=> false,
'SENSORS_SYNCHRONIZED'=>false,
'PARAMETERS_PRESET'=> false,
'SEQUENCERS_ADVANCED'=> false,
'INITIALIZED'=> false);
return $mode; return $mode;
} }
unset ($GLOBALS ['mt9p006_mode']);
return 0; return 0;
} }
function get_eyesis_mode() { function get_eyesis_mode() {
$csa=get_application_mode(); $csa=get_application_mode();
// var_dump($csa); // var_dump($csa);
if ($csa['application'] == 'EYESIS') { if ($csa['application'] == 'EYESIS') {
$eyesis_mode = intval($csa['mode']); $eyesis_mode = intval($csa['mode']);
$GLOBALS ['eyesis_mode'] = $eyesis_mode;
$GLOBALS['STOP_AFTER']=array(
'BOOT' => true,
'POWERED' => true,
'BITSTREAM'=> true,
'SENSORS_DETECTED'=> true,
'SENSORS_SYNCHRONIZED'=>true,
'PARAMETERS_PRESET'=> true,
'SEQUENCERS_ADVANCED'=> true,
'INITIALIZED'=> true);
return $eyesis_mode; return $eyesis_mode;
} }
unset ($GLOBALS ['eyesis_mode']);
return 0; return 0;
} }
...@@ -908,26 +1148,13 @@ function processInit($initPage, $needDetection = true) { ...@@ -908,26 +1148,13 @@ function processInit($initPage, $needDetection = true) {
usleep ( $waitDaemons * 1000000 ); usleep ( $waitDaemons * 1000000 );
log_msg("Current frame on master port =" . elphel_get_frame ( $GLOBALS ['master_port'] ) . ", waking up, daemons should be dead already"); log_msg("Current frame on master port =" . elphel_get_frame ( $GLOBALS ['master_port'] ) . ", waking up, daemons should be dead already");
} }
/*
if ($needDetection) {
if (! detectSensor ())
RETURN - 1;
}
*/
log_msg("after reset - current frame on master port =" . elphel_get_frame ( $GLOBALS ['master_port'] )); log_msg("after reset - current frame on master port =" . elphel_get_frame ( $GLOBALS ['master_port'] ));
// $page=setParsFromPage($initPage,0xffffffff,true); /// all parameters, init mode - treat all parameters as new, even when they are the same as current (0)
// $GLOBALS['sensor_port']!!!!!!!!!!! // $GLOBALS['sensor_port']!!!!!!!!!!!
$pages = setParsFromPage (-1, $initPage, 0x1, true ); // /only init parameters? $pages = setParsFromPage (-1, $initPage, 0x1, true ); // /only init parameters?
log_msg("after setParsFromPage - current frame on master port=" . elphel_get_frame ( $GLOBALS ['master_port'] )); log_msg("after setParsFromPage - current frame on master port=" . elphel_get_frame ( $GLOBALS ['master_port'] ));
return $pages; return $pages;
/*
* !
* Strange with autoexposure - for frame #006 it gets zero pixels in the histogram, 7 - 0x3fff
* 8..10 yet unknown)
* frame 11 (0xb) - normal total_pixels=0x4c920
*/
} }
function processDaemon($port) { function processDaemon($port) {
//TODO: Make sure $port >=0 //TODO: Make sure $port >=0
...@@ -1262,9 +1489,17 @@ JAVASCRIPT; ...@@ -1262,9 +1489,17 @@ JAVASCRIPT;
/** /**
* @brief Scan commands for possible changing gamma tables, calculate them in advance * @brief Scan commands for possible changing gamma tables, calculate them in advance
* (driver can only scale gamma, not calculate prototypes) * (driver can only scale gamma, not calculate prototypes)
* $pars can be either array of parameters or array of array of parameters (for multi-port)
*/ */
function addGammas($pars) { // common to all channels function addGammas($mpars) { // common to all channels
foreach ($mpars as $p){
if (!is_array($p)){
$pars=array($pars);
}
break;
}
$gammas = array (); $gammas = array ();
foreach ( $mpars as $pars ) {
if (array_key_exists ( 'GTAB_R', $pars )) if (array_key_exists ( 'GTAB_R', $pars ))
$gammas [$pars ['GTAB_R'] >> 16] = 1; // / duplicates will be eliminated $gammas [$pars ['GTAB_R'] >> 16] = 1; // / duplicates will be eliminated
if (array_key_exists ( 'GTAB_G', $pars )) if (array_key_exists ( 'GTAB_G', $pars ))
...@@ -1273,6 +1508,7 @@ function addGammas($pars) { // common to all channels ...@@ -1273,6 +1508,7 @@ function addGammas($pars) { // common to all channels
$gammas [$pars ['GTAB_GB'] >> 16] = 1; $gammas [$pars ['GTAB_GB'] >> 16] = 1;
if (array_key_exists ( 'GTAB_B', $pars )) if (array_key_exists ( 'GTAB_B', $pars ))
$gammas [$pars ['GTAB_B'] >> 16] = 1; $gammas [$pars ['GTAB_B'] >> 16] = 1;
}
// var_dump($gammas); // var_dump($gammas);
foreach ( $gammas as $gamma_black => $whatever ) { foreach ( $gammas as $gamma_black => $whatever ) {
$black = ($gamma_black >> 8) & 0xff; $black = ($gamma_black >> 8) & 0xff;
...@@ -1281,10 +1517,48 @@ function addGammas($pars) { // common to all channels ...@@ -1281,10 +1517,48 @@ function addGammas($pars) { // common to all channels
} }
} }
/** $all - array (indexed by ports) of arrays of parameters
* keep only parameters listed in $filter - array of parameter names*/
function filterParsKeepRemove($all, ///< array (indexed by ports) of arrays of parameters
$filter, ///< array of parameter names
$keep) ///< true - keep listed in filter, false - remove listed
///< @return array of per-port array of parameters
{
$rslt=array();
foreach ($all as $port=>$port_pars){
$rslt[$port]=array();
foreach ($port_pars as $par=>$value){
if (in_array ( $par, $filter)) {
if ($keep) $rslt[$port][$par]=$value;
} else {
if (!$keep) $rslt[$port][$par]=$value;
}
}
}
return $rslt;
}
/** Get */
function getMaskedPars($port_page, ///< array of parameter pages indexed by ports
$mask) ///< bitmask for parameter groups to use (1 - init)
///< @return array of per-port array of parameters
{
$all_port_pars=array();
foreach ( $port_page as $port=>$page ) {
$all_port_pars[$port] = array();
foreach ( $GLOBALS ['configs'] [$port] ['groups'] as $par => $parMask ) {
if (($mask & $parMask) && array_key_exists ( $par, $GLOBALS ['configs'] [$port] ['paramSets'] [$page] ) &&
(! $GLOBALS ['configs'] [$port] ['parTypes'] [$par])) // / not 'text'
$all_port_pars[$port][$par] = myval ( $GLOBALS ['configs'] [$port] ['paramSets'] [$page] [$par] );
}
}
return $all_port_pars;
}
function setParsFromPage($sensor_port, $page, $mask, $initmode = false) { function setParsFromPage($sensor_port, $page, $mask, $initmode = false) {
// If init_mode - will set all ports, $sensor_port will be ignored // If init_mode - will set all ports, $sensor_port will be ignored
// will return an array of pages, matching $GLOBALS ['ports'] array // will return an array of pages, matching $GLOBALS['ports'] array
// /FIXME: !!! // /FIXME: !!!
// / Prevent too many i2c register writes for the same frame. If it is the case - split parameter groups between several frames // / Prevent too many i2c register writes for the same frame. If it is the case - split parameter groups between several frames
// / AS there is a hardware limit of 64 parameters/frame in the sequencers (64 for the i2c, 64 - for the FPGA registers) // / AS there is a hardware limit of 64 parameters/frame in the sequencers (64 for the i2c, 64 - for the FPGA registers)
...@@ -1296,7 +1570,7 @@ function setParsFromPage($sensor_port, $page, $mask, $initmode = false) { ...@@ -1296,7 +1570,7 @@ function setParsFromPage($sensor_port, $page, $mask, $initmode = false) {
// New way (for nc393) // New way (for nc393)
$delayed_par_names=array("TRIG", "TRIG_PERIOD", "TRIG_CONDITION", "TRIG_MASTER"); $delayed_par_names=array("TRIG", "TRIG_PERIOD", "TRIG_CONDITION", "TRIG_MASTER");
$pages=array(); $pages=array();
foreach ( $GLOBALS ['ports'] as $port ) { foreach ( $GLOBALS['ports'] as $port ) {
if ($page == $GLOBALS ['useDefaultPageNumber']) { if ($page == $GLOBALS ['useDefaultPageNumber']) {
$page = $GLOBALS ['configs'] [$port] ['defaultPage']; $page = $GLOBALS ['configs'] [$port] ['defaultPage'];
} }
...@@ -1305,7 +1579,7 @@ function setParsFromPage($sensor_port, $page, $mask, $initmode = false) { ...@@ -1305,7 +1579,7 @@ function setParsFromPage($sensor_port, $page, $mask, $initmode = false) {
if (($mask & $parMask) && array_key_exists ( $par, $GLOBALS ['configs'] [$port] ['paramSets'] [$page] ) && (! $GLOBALS ['configs'] [$port] ['parTypes'] [$par])) // / not 'text' if (($mask & $parMask) && array_key_exists ( $par, $GLOBALS ['configs'] [$port] ['paramSets'] [$page] ) && (! $GLOBALS ['configs'] [$port] ['parTypes'] [$par])) // / not 'text'
$parToSet [$par] = myval ( $GLOBALS ['configs'] [$port] ['paramSets'] [$page] [$par] ); $parToSet [$par] = myval ( $GLOBALS ['configs'] [$port] ['paramSets'] [$page] [$par] );
} }
// /NOTE: Important ; add gamma tables if parameters modified involve setting/chnaging them // /NOTE: Important ; add gamma tables if parameters modified involve setting/changing them
addGammas ( $parToSet ); addGammas ( $parToSet );
$delayed_params = array (); $delayed_params = array ();
......
src/autocampars.py
View file @ 0fc43003
...@@ -86,7 +86,10 @@ def remote_parallel393(args, host, timeout=0): #fp in sec ...@@ -86,7 +86,10 @@ def remote_parallel393(args, host, timeout=0): #fp in sec
for i in argshosts: for i in argshosts:
i[0]['cmd'] = 'py393' i[0]['cmd'] = 'py393'
urls.append("http://"+i[1]+"/"+WWW_SCRIPT+"?"+urllib.urlencode(i[0])) urls.append("http://"+i[1]+"/"+WWW_SCRIPT+"?"+urllib.urlencode(i[0]))
return remote_parallel_urls(urls=urls, timeout=timeout) rslts = remote_parallel_urls(urls=urls, timeout=timeout)
for num,result in enumerate(results):
print (">>>>> ",num,": ",result);
return rslts
def remote_parallel_urls(urls, timeout=0): #imeout will restart for each next url def remote_parallel_urls(urls, timeout=0): #imeout will restart for each next url
def read_url(index, queue, url): def read_url(index, queue, url):
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment