Updated scripts to work with current yocto/python (0a15e1e3) · Commits · Elphel / x393_sata

py393sata/x393_mem.py

+47 −19

Original line number	Diff line number	Diff line
		@@ -43,6 +43,8 @@ class X393Mem(object):
		MAXI0_BASE=0x40000000
		MAXI1_BASE=0x80000000
		MAXI_BASE = MAXI0_BASE
		USE_NEGATIVE = True # Old versions of Python (2.7.3) required mmap offset to fit into 32 bits, so upper half had to be negative
		# 2.7.11 does not need subtraction(and reports error if negative)

		def __init__(self, debug_mode=1,dry_mode=False, maxi_port=0):
		if maxi_port:
		@@ -65,6 +67,26 @@ class X393Mem(object):
		maxi_port = (0,1)[self.MAXI_BASE == self.MAXI1_BASE]
		print ("MAXI port = %d (0x%08x)"%(maxi_port, self.MAXI_BASE))

		def wrap_mm (self, f, page_addr):
		if page_addr>=0x80000000:
		if (self.USE_NEGATIVE):
		try:
		return mmap.mmap(f.fileno(), self.PAGE_SIZE, offset = page_addr - (1<<32))
		except:
		self.USE_NEGATIVE = False
		print ("Turning OFF use of negative offsets in mmap")
		return mmap.mmap(f.fileno(), self.PAGE_SIZE, offset = page_addr)
		else:
		try:
		return mmap.mmap(f.fileno(), self.PAGE_SIZE, offset = page_addr)
		except:
		print ("Turning ON use of negative offsets in mmap")
		self.USE_NEGATIVE = True
		return mmap.mmap(f.fileno(), self.PAGE_SIZE, offset = page_addr - (1<<32))
		else:
		return mmap.mmap(f.fileno(), self.PAGE_SIZE, offset = page_addr)


		def write_mem (self,addr, data,quiet=1):
		"""
		Write 32-bit word to physical memory
		@@ -78,9 +100,10 @@ class X393Mem(object):
		with open("/dev/mem", "r+b") as f:
		page_addr=addr & (~(self.PAGE_SIZE-1))
		page_offs=addr-page_addr
		if (page_addr>=0x80000000):
		page_addr-= (1<<32)
		mm = mmap.mmap(f.fileno(), self.PAGE_SIZE, offset=page_addr)
		mm = self.wrap_mm(f, page_addr)
		# if (page_addr>=0x80000000):
		# page_addr-= (1<<32)
		# mm = mmap.mmap(f.fileno(), self.PAGE_SIZE, offset=page_addr)
		packedData=struct.pack(self.ENDIAN+"L",data)
		d=struct.unpack(self.ENDIAN+"L",packedData)[0]
		mm[page_offs:page_offs+4]=packedData
		@@ -108,9 +131,10 @@ class X393Mem(object):
		with open("/dev/mem", "r+b") as f:
		page_addr=addr & (~(self.PAGE_SIZE-1))
		page_offs=addr-page_addr
		if (page_addr>=0x80000000):
		page_addr-= (1<<32)
		mm = mmap.mmap(f.fileno(), self.PAGE_SIZE, offset=page_addr)
		mm = self.wrap_mm(f, page_addr)
		# if (page_addr>=0x80000000):
		# page_addr-= (1<<32)
		# mm = mmap.mmap(f.fileno(), self.PAGE_SIZE, offset=page_addr)
		data=struct.unpack(self.ENDIAN+"L",mm[page_offs:page_offs+4])
		d=data[0]
		if quiet < 1:
		@@ -149,9 +173,10 @@ class X393Mem(object):
		for addr in range (start_addr,end_addr+byte_mode,byte_mode):
		page_addr=addr & (~(self.PAGE_SIZE-1))
		page_offs=addr-page_addr
		if (page_addr>=0x80000000):
		page_addr-= (1<<32)
		mm = mmap.mmap(f.fileno(), self.PAGE_SIZE, offset=page_addr)
		mm = self.wrap_mm(f, page_addr)
		# if (page_addr>=0x80000000):
		# page_addr-= (1<<32)
		# mm = mmap.mmap(f.fileno(), self.PAGE_SIZE, offset=page_addr)
		data=struct.unpack_from(self.ENDIAN+frmt_bytes[byte_mode],mm, page_offs)
		rslt.append(data[0])

		@@ -202,9 +227,10 @@ class X393Mem(object):
		if page_num == last_page:
		end_offset = start_addr + length - self.PAGE_SIZE * page_num
		page_addr = page_num * self.PAGE_SIZE
		if (page_addr>=0x80000000):
		page_addr-= (1<<32)
		mm = mmap.mmap(f.fileno(), self.PAGE_SIZE, offset=page_addr)
		mm = self.wrap_mm(f, page_addr)
		# if (page_addr>=0x80000000):
		# page_addr-= (1<<32)
		# mm = mmap.mmap(f.fileno(), self.PAGE_SIZE, offset=page_addr)
		bf.write(mm[start_offset:end_offset])

		def mem_clear (self, start_addr, length, word32):
		@@ -229,9 +255,10 @@ class X393Mem(object):
		if page_num == last_page:
		end_offset = start_addr + length - self.PAGE_SIZE * page_num
		page_addr = page_num * self.PAGE_SIZE
		if (page_addr>=0x80000000):
		page_addr-= (1<<32)
		mm = mmap.mmap(f.fileno(), self.PAGE_SIZE, offset=page_addr)
		mm = self.wrap_mm(f, page_addr)
		# if (page_addr>=0x80000000):
		# page_addr-= (1<<32)
		# mm = mmap.mmap(f.fileno(), self.PAGE_SIZE, offset=page_addr)
		mm[start_offset:end_offset] = patt[start_offset:end_offset]


		@@ -273,9 +300,10 @@ class X393Mem(object):
		data = (start_data + ((addr-start_addr) // byte_mode)*inc_data) & data_mask
		page_addr=addr & (~(self.PAGE_SIZE-1))
		page_offs=addr-page_addr
		if (page_addr>=0x80000000):
		page_addr-= (1<<32)
		mm = mmap.mmap(f.fileno(), self.PAGE_SIZE, offset=page_addr)
		mm = self.wrap_mm(f, page_addr)
		# if (page_addr>=0x80000000):
		# page_addr-= (1<<32)
		# mm = mmap.mmap(f.fileno(), self.PAGE_SIZE, offset=page_addr)
		struct.pack_into(self.ENDIAN+frmt_bytes[byte_mode],mm, page_offs, data)

		'''

py393sata/x393_vsc3304.py

+17 −2

Original line number	Diff line number	Diff line
		@@ -32,9 +32,10 @@ import os
		from x393_mem import X393Mem
		#from time import sleep
		#import shutil
		VSC_DIR="/sys/devices/amba.0/e0004000.ps7-i2c/i2c-0/0-0001"
		VSC_DIR_OLD="/sys/devices/amba.0/e0004000.ps7-i2c/i2c-0/0-0001"
		VSC_DIR_NEW="/sys/devices/soc0/amba@0/e0004000.ps7-i2c/i2c-0/0-0001"
		# 10389 rev "0"

		VSC_DIR = None
		class x393_vsc3304(object):
		DRY_MODE= True # True
		DEBUG_MODE=1
		@@ -88,17 +89,31 @@ class x393_vsc3304(object):
		PCB_REV = "10389"
		current_mode = "ESATA<->SSD"
		def __init__(self, debug_mode=1,dry_mode=False, pcb_rev = "10389"):
		global VSC_DIR
		self.DEBUG_MODE=debug_mode
		if not dry_mode:
		if not os.path.exists("/dev/xdevcfg"):
		dry_mode=True
		print("Program is forced to run in SIMULATED mode as '/dev/xdevcfg' does not exist (not a camera)")
		else:
		if os.path.exists(VSC_DIR_OLD):
		print ('x393_vsc3304: Running on OLD system')
		VSC_DIR = VSC_DIR_OLD
		elif os.path.exists(VSC_DIR_NEW):
		print ('x393_vsc3304: Running on NEW system')
		VSC_DIR = VSC_DIR_NEW
		else:
		print ("Does not seem to be a known system - both %s (old) and %s (new) are not found"%(VSC_DIR_OLD, VSC_DIR_NEW))
		return


		self.DRY_MODE=dry_mode
		self.x393_mem=X393Mem(debug_mode,dry_mode, 1)
		if not pcb_rev in self.PCB_CONNECTIONS:
		print ("Unknown PCB/rev: %s (defined: %s), using %s"%(pcb_rev, str(self.PCB_CONNECTIONS.keys()),self.PCB_REV))
		else:
		self.PCB_REV = pcb_rev

		def echo(self, what, where):
		if self.DRY_MODE:
		print ("'%s' -> '%s'"%(str(what), VSC_DIR+"/"+where))

py393sata/x393sata.py

+280 −1

Original line number	Diff line number	Diff line
		@@ -37,13 +37,58 @@ from x393_vsc3304 import x393_vsc3304
		import create_ahci_registers as registers
		from time import sleep
		import shutil

		PAGE_SIZE = 4096
		#:/sys/devices/soc0/amba@0/e0004000.ps7-i2c/i2c-0
		#Old System
		SI5338_PATH_OLD = '/sys/devices/amba.0/e0004000.ps7-i2c/i2c-0/0-0070'
		MEM_PATH_OLD = '/sys/devices/elphel393-mem.2/'
		#new System
		SI5338_PATH_NEW = '/sys/devices/soc0/amba@0/e0004000.ps7-i2c/i2c-0/0-0070'
		MEM_PATH_NEW = '/sys/devices/soc0/elphel393-mem@0/'

		DEFAULT_BITFILE="/usr/local/verilog/x393_sata.bit"
		SI5338_PATH = '/sys/devices/amba.0/e0004000.ps7-i2c/i2c-0/0-0070'
		BUFFER_ADDRESS_NAME = 'buffer_address'
		BUFFER_PAGES_NAME = 'buffer_pages'
		BUFFER_FLUSH_NAME = 'buffer_flush'
		FPGA_RST_CTRL= 0xf8000240
		FPGA0_THR_CTRL=0xf8000178
		FPGA_LOAD_BITSTREAM="/dev/xdevcfg"
		INT_STS= 0xf800700c
		MAXI1_ADDR = 0x80000000
		DATASCOPE_ADDR = 0x1000 + MAXI1_ADDR
		COMMAND_HEADER0_OFFS = 0x800 # offset of the command header 0 in MAXI1 space
		COMMAND_BUFFER_OFFSET = 0x0 # Just at the beginning of available memory
		COMMAND_BUFFER_SIZE = 0x100 # 256 bytes - 128 before PRDT, 128+ - PRDTs (16 bytes each)
		PRD_OFFSET = 0x80 # Start of the PRD table
		DATAIN_BUFFER_OFFSET = 0x10000
		DATAIN_BUFFER_SIZE = 0x10000
		IDENTIFY_BUF = 0 # Identify receive buffer offset in DATAIN_BUFFER, in bytes


		DATAOUT_BUFFER_OFFSET = 0x20000
		DATAOUT_BUFFER_SIZE = 0x10000
		SI5338_PATH = None
		MEM_PATH = None

		BUFFER_ADDRESS = None # in bytes
		BUFFER_LEN = None # in bytes
		COMMAND_ADDRESS = None # start of the command buffer (to be sent to device)
		DATAIN_ADDRESS = None # start of the the
		DATAOUT_ADDRESS = None # start of the the

		#FIS types
		FIS_H2DR = 0x27
		FIS_D2HR = 0x34
		FIS_DMAA = 0x39
		FIS_DMAS = 0x41
		FIS_DATA = 0x46
		FIS_BIST = 0x58
		FIS_PIOS = 0x5f
		FIS_SDB = 0xa1
		#ATA commands
		ATA_IDFY = 0xEC

		class x393sata(object):
		DRY_MODE= True # True
		DEBUG_MODE=1
		@@ -51,6 +96,8 @@ class x393sata(object):
		vsc3304 = None
		register_defines=None
		def __init__(self, debug_mode=1,dry_mode=False, pcb_rev = "10389"):
		global BUFFER_ADDRESS, BUFFER_LEN, COMMAND_ADDRESS, DATAIN_ADDRESS, DATAOUT_ADDRESS, SI5338_PATH, MEM_PATH

		self.DEBUG_MODE=debug_mode
		if not dry_mode:
		if not os.path.exists("/dev/xdevcfg"):
		@@ -60,6 +107,40 @@ class x393sata(object):
		self.x393_mem=X393Mem(debug_mode,dry_mode, 1)
		self.vsc3304= x393_vsc3304(debug_mode, dry_mode, pcb_rev)
		self.register_defines = registers.process_data(False)['field_defines']
		if dry_mode:
		BUFFER_ADDRESS=0x27900000 # 0x38100000 on new
		BUFFER_LEN= 0x6400000
		print ("Running in simulated mode, using hard-coded addresses:")
		else:
		if os.path.exists(SI5338_PATH_OLD):
		print ('x393sata: Running on OLD system')
		SI5338_PATH = SI5338_PATH_OLD
		MEM_PATH = MEM_PATH_OLD
		elif os.path.exists(SI5338_PATH_NEW):
		print ('x393sata: Running on NEW system')
		SI5338_PATH = SI5338_PATH_NEW
		MEM_PATH = MEM_PATH_NEW
		else:
		print ("Does not seem to be a known system - both %s (old) and %s (new) are not found"%(SI5338_PATH_OLD, SI5338_PATH_NEW))
		return
		try:
		with open(MEM_PATH+BUFFER_ADDRESS_NAME) as sysfile:
		BUFFER_ADDRESS=int(sysfile.read(),0)
		with open(MEM_PATH+BUFFER_PAGES_NAME) as sysfile:
		BUFFER_LEN=PAGE_SIZE*int(sysfile.read(),0)
		except:
		print("Failed to get reserved physical memory range")
		print('BUFFER_ADDRESS=',BUFFER_ADDRESS)
		print('BUFFER_LEN=',BUFFER_LEN)
		return
		COMMAND_ADDRESS = BUFFER_ADDRESS + COMMAND_BUFFER_OFFSET
		DATAIN_ADDRESS = BUFFER_ADDRESS + DATAIN_BUFFER_OFFSET
		DATAOUT_ADDRESS = BUFFER_ADDRESS + DATAOUT_BUFFER_OFFSET
		print('BUFFER_ADDRESS=0x%x'%(BUFFER_ADDRESS))
		print('BUFFER_LEN=0x%x'%(BUFFER_LEN))
		print('COMMAND_ADDRESS=0x%x'%(COMMAND_ADDRESS))
		print('DATAIN_ADDRESS=0x%x'%(DATAIN_ADDRESS))
		print('DATAOUT_ADDRESS=0x%x'%(DATAOUT_ADDRESS))
		def reset_get(self):
		"""
		Get current reset state
		@@ -82,6 +163,15 @@ class x393sata(object):
		else:
		for d in data:
		self.x393_mem.write_mem(FPGA_RST_CTRL,d)

		def flush_mem(self):
		"""
		Flush memory buffer
		"""
		with open (MEM_PATH+BUFFER_FLUSH_NAME,"w") as f:
		print ("1",file=f)


		def bitstream(self,
		bitfile=None,
		quiet=1):
		@@ -346,7 +436,64 @@ class x393sata(object):
		"""
		shutil.copy2(src, dst)

		def setup_pio_read_identify_command(self, prd_irqs = None):
		"""
		@param prd_irqs - None or a tuple/list with per-PRD interrupts
		"""
		# clear system memory for command
		for a in range(64):
		self.x393_mem.write_mem(COMMAND_ADDRESS + 4*a, 0)
		self.x393_mem.write_mem(COMMAND_ADDRESS + 0,
		FIS_H2DR \| # FIS type - H2D register (0x27)
		(0x80 << 8) \| # set C = 1
		(ATA_IDFY << 16) \| # Command = 0xEC (IDFY)
		( 0 << 24)) # features = 0 ?
		# All other 4 DWORDs are 0 for this command
		# Set PRDT (single item) TODO: later check multiple small ones
		self.x393_mem.write_mem(COMMAND_ADDRESS + PRD_OFFSET + (0 << 2), DATAIN_ADDRESS + IDENTIFY_BUF)
		prdt_int = 0
		if prd_irqs:
		prdt_int = (0,1)[prd_irqs[0]]
		self.x393_mem.write_mem(COMMAND_ADDRESS + PRD_OFFSET + (3 << 2), DATAIN_ADDRESS + (prdt_int << 31) \| 511) # 512 bytes in this PRDT)
		# Setup command header
		self.x393_mem.write_mem(MAXI1_ADDR + COMMAND_HEADER0_OFFS + (0 << 2),
		(5 << 0) \| # 'CFL' - number of DWORDs in this CFIS
		(0 << 5) \| # 'A' Not ATAPI
		(0 << 6) \| # 'W' Not write to device
		(1 << 7) \| # 'P' Prefetchable = 1
		(0 << 8) \| # 'R' Not a Reset
		(0 << 9) \| # 'B' Not a BIST
		(1 << 10) \| # 'C' Do clear BSY/CI after transmitting this command
		(1 << 16)) # 'PRDTL' - number of PRDT entries (just one)
		self.x393_mem.write_mem(MAXI1_ADDR + COMMAND_HEADER0_OFFS + (2 << 2),
		(COMMAND_ADDRESS) & 0xffffffc0) # 'CTBA' - Command table base address
		# Make it flush?
		# Write some junk to the higher addresses of the CFIS
		for i in range (10):
		self.x393_mem.write_mem(COMMAND_ADDRESS + 4*(i+1),
		(4 * i + 1) \|
		((4 * i + 2) << 8) \|
		((4 * i + 3) << 16) \|
		((4 * i + 4) << 24))


		for i in range (4066):
		self.x393_mem.write_mem(COMMAND_ADDRESS + 32 * i, self.x393_mem.read_mem(COMMAND_ADDRESS + 32 * i))
		# print("Running flush_mem()")
		# self.flush_mem()
		# Set Command Issued
		#self.x393_mem.write_mem(self.get_reg_address('HBA_PORT__PxCI'), 1)
		print("_=mem.mem_dump (0x%x, 0x20,4)"%(COMMAND_ADDRESS))
		self.x393_mem.mem_dump (COMMAND_ADDRESS, 0x20,4)
		print("_=mem.mem_dump (0x%x, 0x20,4)"%(DATASCOPE_ADDR))
		self.x393_mem.mem_dump (DATASCOPE_ADDR, 0x20,4)
		print("mem.write_mem(sata.get_reg_address('HBA_PORT__PxCI'), 1)")

		"""
		mem.write_mem(0x80000118,0x11) # ST & FRE



		cd /mnt/mmc/local/bin
		python
		from __future__ import print_function
		@@ -356,6 +503,15 @@ import x393_mem
		mem = x393_mem.X393Mem(1,0,1)
		sata = x393sata.x393sata()
		sata.bitstream()
		sata.reg_status()

		mem.write_mem(0x80000118,0x11)
		sata.setup_pio_read_identify_command()
		mem.write_mem(sata.get_reg_address('HBA_PORT__PxCI'), 1)
		_=mem.mem_dump (0x80001000, 0x20,4)



		sata.vsc3304.connection_status()

		sata.reg_status()
		@@ -367,11 +523,134 @@ hex(mem.read_mem(0x8000012c))
		hex(mem.read_mem(0x80000130))
		hex(mem.read_mem(0x80000ff0))

		sata.reset_ie(), sata.reg_status()
		hex(mem.read_mem(0x80000ff0))


		mem.write_mem(0x80000118,0x11)
		sata.setup_pio_read_identify_command()
		mem.write_mem(sata.get_reg_address('HBA_PORT__PxCI'), 1)
		_=mem.mem_dump (0x80001000, 0x20,4)

		mem.maxi_base()
		hex(mem.read_mem(0x80000180))
		mem.mem_dump (0x80000000, 0x200,1)
		_=mem.mem_dump (0x80000000, 0x100,4)


		sata.reset_ie(),sata.reset_device(), sata.reg_status(), hex(mem.read_mem(0x80000ff0))
		sata.reset_ie(), sata.reg_status(), hex(mem.read_mem(0x80000ff0))

		_=mem.mem_dump (0x80001000, 0x10,4)

		_=mem.mem_dump (0x80001000, 0x20,4)
		_=mem.mem_dump (0x27900000, 0x20,4)

		for i in range (1024):
		mem.write_mem(0x27900000 + 32i, mem.read_mem(0x27900000 + 32i))

		0x6b 16d53
		06b: 00104 # CFIS:Xmit: do SET_BSY
		06c: 30060 # do CFIS_XMIT, WAIT DONE ***** Got stuck here?
		06d: 19039 # if X_RDY_COLLISION goto P:Idle
		06e: 150f8 # if SYNCESC_ERR goto ERR:SyncEscapeRecv
		06f: 0a471 # if FIS_OK goto CFIS:Success
		070: 00102 # always goto ERR:Non-Fatal


		sata.reset_ie(),sata.reset_device(), sata.reg_status(), hex(mem.read_mem(0x80000ff0))
		sata.reset_ie(), sata.reg_status(), hex(mem.read_mem(0x80000ff0))
		mem.write_mem(0x80000118,0x11)
		sata.reg_status()
		mem.write_mem(sata.get_reg_address('HBA_PORT__PxCI'), 1)
		_=mem.mem_dump (0x80001000, 0x20,4)

		mem.write_mem(0x80000118,0x10)


		>>> sata.setup_pio_read_identify_command()

		>>> sata.reg_status()
		HBA_PORT__PxIS: 0x00400042 [80000110]
		1 : PRCS (PhyRdy changed Status)
		1 : PCS (Port Connect Change Status)
		1 : PSS (PIO Setup FIS Interrupt - PIO Setup FIS received with 'I' bit set)
		HBA_PORT__PxCMD: 0x00048017 [80000118]
		1 : HPCP (Hot Plug Capable Port)
		1 : CR (Command List Running (section 5.3.2))
		1 : FRE (FIS Receive Enable (enable after FIS memory is set))
		1 : POD (Power On Device (RW with Cold Presence Detection))
		1 : SUD (Spin-Up Device (RW with Staggered Spin-Up Support))
		1 : ST (Start (HBA may process commands). See section 10.3.1)
		HBA_PORT__PxTFD: 0x00000050 [80000120]
		5 : STS.64 (Latest Copy of Task File Status Register: command-specific bits 4..6 )
		HBA_PORT__PxSIG: 0x00000101 [80000124]
		101 : SIG (Data in the first D2H Register FIS)
		HBA_PORT__PxSSTS: 0x00000123 [80000128]
		1 : IPM (Interface Power Management)
		2 : SPD (Interface Speed)
		3 : DET (Device Detection (should be detected if COMINIT is received))
		HBA_PORT__PxSERR: 0x040d0000 [80000130]
		1 : DIAG.X (Exchanged (set on COMINIT), reflected in PxIS.PCS)
		1 : DIAG.B (10B to 8B decode error)
		1 : DIAG.W (COMMWAKE signal was detected)
		1 : DIAG.N (PhyRdy changed. Reflected in PxIS.PRCS bit.)
		HBA_PORT__PxCI: 0x00000000 [80000138]
		>>> hex(mem.read_mem(0x80000ff0))
		'0x3916f53'
		>>> _=mem.mem_dump (0x38110000, 0x100,4)

		0x38110000:3fff0040 0010c837 00000000 0000003f 00000000 33393133 34303535 33353030 20202020 20202020 00000000 58320000 32303331 53613020 69736e44 53446b20
		0x38110040:46313653 32384d31 20204720 20202020 20202020 20202020 20202020 80012020 2f004000 02004000 00070000 00103fff fc10003f 010100fb 0ee7c2b0 00070000
		0x38110080:00780003 00780078 40200078 00000000 00000000 001f0000 0084870e 0040014c 002801f0 7d09346b 34694123 4123bc09 0001207f 00800006 0000fffe 00000000
		0x381100c0:00000000 00000000 0ee7c2b0 00000000 00100000 00004000 b44a5001 2d633bf2 00000000 00000000 00000000 401c0000 0000401c 00000000 00000000 00000000
		0x38110100:00000021 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
		0x38110140:00000000 00000000 00000000 00000000 0001000b 00000000 00000000 00000000 20202020 20202020 20202020 20202020 20202020 20202020 20202020 20202020
		0x38110180:20202020 20202020 20202020 20202020 20202020 20202020 20202020 00000000 40000000 00000000 00000000 00000000 00010000 00000000 00000000 0000103f
		0x381101c0:00000000 00000000 00000000 00000000 00000000 00800001 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 4da50000
		0x38110200:00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
		0x38110240:00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
		0x38110280:00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
		0x381102c0:00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
		0x38110300:00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
		0x38110340:00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
		0x38110380:00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
		0x381103c0:00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000





		0x27900000:00ec8027 04030201 08070605 0c0b0a09 100f0e0d 14131211 18171615 1c1b1a19 201f1e1d 24232221 28272625 00000000 00000000 00000000 00000000 00000000
		0x27900040:00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

		0x80001000:00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
		0x80001040:00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

		0x80001000:00000000 00000000 00000000 00ec8027 04030201 08070605 0c0b0a09 100f0e0d 14131211 18171615 1c1b1a19 201f1e1d 24232221 28272625 00000000 00000000
		0x80001040:00000000 00000000 00000000 00000000 00000014 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

		0x80001000:40000000 40100000 40200000 403c8027 40430201 40570605 406b0a09 407f0e0d 40831211 40971615 40ab1a19 40bf1e1d 40c32221 40d72625 00e00000 00f00000
		0x80001040:01000000 81100000 00000012 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

		0x80001000:40000000 40100000 40200000 403c8027 40430201 40570605 406b0a09 407f0e0d 40831211 40971615 40d32221 00e72625 00f00000 01000000 81100000 0000000f
		0x80001040:00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000





		0x27900000:00ec8027 11111111 22222222 33333333 44444444 55555555 66666666 77777777 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
		0x27900040:00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

		0x80001000:00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0000000e 00000000
		0x80001040:00000000 00000000 00000012 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

		0x80001000:00000000 00000000 00000000 00ec8027 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
		0x80001040:00000000 00000000 00000012 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000



		0x80000000:00240020 80000000 00000000 00000001 00010301 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
		0x80000040:00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
		0x80000080:00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

Admin message