fixed a bug caused by a counter-intuitive CLKINSEL in MMCME2_ADV

.project

@@ -92,7 +92,7 @@
 		<link>
 			<name>vivado_logs/VivadoSynthesis.log</name>
 			<type>1</type>
-			<location>/home/andrey/git/x393/vivado_logs/VivadoSynthesis-20150719165235946.log</location>
+			<location>/home/andrey/git/x393/vivado_logs/VivadoSynthesis-20150719200102645.log</location>
 		</link>
 		<link>
 			<name>vivado_logs/VivadoTimimgSummaryReportImplemented.log</name>
@@ -102,7 +102,7 @@
 		<link>
 			<name>vivado_logs/VivadoTimimgSummaryReportSynthesis.log</name>
 			<type>1</type>
-			<location>/home/andrey/git/x393/vivado_logs/VivadoTimimgSummaryReportSynthesis-20150719165235946.log</location>
+			<location>/home/andrey/git/x393/vivado_logs/VivadoTimimgSummaryReportSynthesis-20150719200102645.log</location>
 		</link>
 		<link>
 			<name>vivado_logs/VivadoTimingReportImplemented.log</name>
@@ -112,7 +112,7 @@
 		<link>
 			<name>vivado_logs/VivadoTimingReportSynthesis.log</name>
 			<type>1</type>
-			<location>/home/andrey/git/x393/vivado_logs/VivadoTimingReportSynthesis-20150719165235946.log</location>
+			<location>/home/andrey/git/x393/vivado_logs/VivadoTimingReportSynthesis-20150719200102645.log</location>
 		</link>
 		<link>
 			<name>vivado_state/x393-opt-phys.dcp</name>
@@ -132,7 +132,7 @@
 		<link>
 			<name>vivado_state/x393-synth.dcp</name>
 			<type>1</type>
-			<location>/home/andrey/git/x393/vivado_state/x393-synth-20150719165235946.dcp</location>
+			<location>/home/andrey/git/x393/vivado_state/x393-synth-20150719200102645.dcp</location>
 		</link>
 	</linkedResources>
 </projectDescription>

memctrl/phy/phy_top.v

@@ -335,7 +335,7 @@ BUFG mclk_i (.O(mclk),.I(mclk_pre) );
     ) mmcm_phase_cntr_i (
         .clkin1              (clk_in), // input
         .clkin2              (1'b0), // input
-        .clkinsel            (1'b0), // input
+        .sel_clk2            (1'b0), // input
         .clkfbin             (clk_fb), // input
 //        .rst                 (rst), // input
         .rst                 (rst_in), // input

sensor/sens_parallel12.v

@@ -595,7 +595,7 @@ module  sens_parallel12 #(
     ) mmcm_phase_cntr_i (
         .clkin1              (pclk),            // input
         .clkin2              (ibpf),            // input
-        .clkinsel            (sel_ext_clk),     // input
+        .sel_clk2            (sel_ext_clk),     // input
         .clkfbin             (clk_fb),          // input
         .rst                 (rst_mmcm),        // input
         .pwrdwn              (1'b0),            // input

util_modules/clocks393.v

@@ -121,7 +121,6 @@ module  clocks393#(
     wire memclk_rst = reset_clk[4];
     wire ffclk0_rst = reset_clk[5];
     wire ffclk1_rst = reset_clk[6];
-    
     always @ (posedge mclk or posedge rst) begin
         if (rst)             reset_clk <= 0;
         else if (set_ctrl_w) reset_clk <= {cmd_data[10:8], cmd_data[3:0]};

wrap/mmcm_phase_cntr.v

@@ -73,7 +73,7 @@ module  mmcm_phase_cntr#(
 (
     input clkin1,   // General clock input
     input clkin2,   // Alternative clock input
-    input clkinsel, // Clock input select
+    input sel_clk2, // Clock input select (inverted from MMCME2_ADV !!!)
     input clkfbin,  // Feedback clock input
     input rst,      // asynchronous reset input
     input pwrdwn,   // power down input    
@@ -209,7 +209,7 @@ module  mmcm_phase_cntr#(
         .CLKFBIN        (clkfbin), // input
         .CLKIN1         (clkin1), // input
         .CLKIN2         (clkin2), // input
-        .CLKINSEL       (clkinsel), // input Select CLKIN1
+        .CLKINSEL       (~sel_clk2), // input  0: Select CLKIN2, 1: Select CLKIN1 !!!!!!!!!!!!! 
         .DADDR             (7'b0), // Dynamic reconfiguration address (input[6:0])
         .DCLK              (1'b0), // Dynamic reconfiguration clock input
         .DEN               (1'b0), // Dynamic reconfiguration enable input

x393.xdc

@@ -213,163 +213,6 @@ set_property PACKAGE_PIN T11 [get_ports {DUMMY_TO_KEEP}]
 set_property PACKAGE_PIN M5 [get_ports {memclk}]
 
 
-
-# ================= Sensor port 0 =================
-#        inout                  [7:0] sns1_dp,
-#        inout                  [7:0] sns1_dn,
-set_property PACKAGE_PIN T10  [get_ports {sns1_dp[0]}]
-set_property PACKAGE_PIN T9   [get_ports {sns1_dn[0]}]
-
-set_property PACKAGE_PIN U10  [get_ports {sns1_dp[1]}]
-set_property PACKAGE_PIN V10  [get_ports {sns1_dn[1]}]
-
-set_property PACKAGE_PIN V8   [get_ports {sns1_dp[2]}]
-set_property PACKAGE_PIN W8   [get_ports {sns1_dn[2]}]
-
-set_property PACKAGE_PIN W9   [get_ports {sns1_dp[3]}]
-set_property PACKAGE_PIN Y8   [get_ports {sns1_dn[3]}]
-
-set_property PACKAGE_PIN AB9  [get_ports {sns1_dp[4]}]
-set_property PACKAGE_PIN AB8  [get_ports {sns1_dn[4]}]
-
-set_property PACKAGE_PIN AB13 [get_ports {sns1_dp[5]}]
-set_property PACKAGE_PIN AB12 [get_ports {sns1_dn[5]}]
-
-set_property PACKAGE_PIN AA12 [get_ports {sns1_dp[6]}]
-set_property PACKAGE_PIN AA11 [get_ports {sns1_dn[6]}]
-
-set_property PACKAGE_PIN W11  [get_ports {sns1_dp[7]}]
-set_property PACKAGE_PIN W10  [get_ports {sns1_dn[7]}]
-#    inout                        sns1_clkp,
-#    inout                        sns1_clkn,
-set_property PACKAGE_PIN AA10 [get_ports {sns1_clkp}]
-set_property PACKAGE_PIN AB10 [get_ports {sns1_clkn}]
-#    inout                        sns1_scl,
-#    inout                        sns1_sda,
-set_property PACKAGE_PIN Y9   [get_ports {sns1_scl}]
-set_property PACKAGE_PIN AA9  [get_ports {sns1_sda}]
-#    inout                        sns1_ctl,
-#    inout                        sns1_pg,
-set_property PACKAGE_PIN U9   [get_ports {sns1_ctl}]
-set_property PACKAGE_PIN U8   [get_ports {sns1_pg}]
-
-# ================= Sensor port 1 =================
-#        inout                  [7:0] sns2_dp,
-#        inout                  [7:0] sns2_dn,
-set_property PACKAGE_PIN U15  [get_ports {sns2_dp[0]}]
-set_property PACKAGE_PIN U14   [get_ports {sns2_dn[0]}]
-
-set_property PACKAGE_PIN V15  [get_ports {sns2_dp[1]}]
-set_property PACKAGE_PIN W15  [get_ports {sns2_dn[1]}]
-
-set_property PACKAGE_PIN U13  [get_ports {sns2_dp[2]}]
-set_property PACKAGE_PIN V13  [get_ports {sns2_dn[2]}]
-
-set_property PACKAGE_PIN V12  [get_ports {sns2_dp[3]}]
-set_property PACKAGE_PIN V11  [get_ports {sns2_dn[3]}]
-
-set_property PACKAGE_PIN AA17 [get_ports {sns2_dp[4]}]
-set_property PACKAGE_PIN AB17 [get_ports {sns2_dn[4]}]
-
-set_property PACKAGE_PIN AA15 [get_ports {sns2_dp[5]}]
-set_property PACKAGE_PIN AB15 [get_ports {sns2_dn[5]}]
-
-set_property PACKAGE_PIN AA14 [get_ports {sns2_dp[6]}]
-set_property PACKAGE_PIN AB14 [get_ports {sns2_dn[6]}]
-
-set_property PACKAGE_PIN Y14  [get_ports {sns2_dp[7]}]
-set_property PACKAGE_PIN Y13  [get_ports {sns2_dn[7]}]
-#    inout                        sns2_clkp,
-#    inout                        sns2_clkn,
-set_property PACKAGE_PIN Y16  [get_ports {sns2_clkp}]
-set_property PACKAGE_PIN AA16 [get_ports {sns2_clkn}]
-#    inout                        sns2_scl,
-#    inout                        sns2_sda,
-set_property PACKAGE_PIN T12  [get_ports {sns2_scl}]
-set_property PACKAGE_PIN U12  [get_ports {sns2_sda}]
-#    inout                        sns2_ctl,
-#    inout                        sns2_pg,
-set_property PACKAGE_PIN V16  [get_ports {sns2_ctl}]
-set_property PACKAGE_PIN W16  [get_ports {sns2_pg}]
-
-# ================= Sensor port 2 =================
-#        inout                  [7:0] sns3_dp,
-#        inout                  [7:0] sns3_dn,
-set_property PACKAGE_PIN AA22 [get_ports {sns3_dp[0]}]
-set_property PACKAGE_PIN AB22 [get_ports {sns3_dn[0]}]
-
-set_property PACKAGE_PIN W21  [get_ports {sns3_dp[1]}]
-set_property PACKAGE_PIN Y22  [get_ports {sns3_dn[1]}]
-
-set_property PACKAGE_PIN V21  [get_ports {sns3_dp[2]}]
-set_property PACKAGE_PIN V22  [get_ports {sns3_dn[2]}]
-
-set_property PACKAGE_PIN W19  [get_ports {sns3_dp[3]}]
-set_property PACKAGE_PIN W20  [get_ports {sns3_dn[3]}]
-
-set_property PACKAGE_PIN N21  [get_ports {sns3_dp[4]}]
-set_property PACKAGE_PIN N22  [get_ports {sns3_dn[4]}]
-
-set_property PACKAGE_PIN R22  [get_ports {sns3_dp[5]}]
-set_property PACKAGE_PIN T22  [get_ports {sns3_dn[5]}]
-
-set_property PACKAGE_PIN P21  [get_ports {sns3_dp[6]}]
-set_property PACKAGE_PIN R21  [get_ports {sns3_dn[6]}]
-
-set_property PACKAGE_PIN T20  [get_ports {sns3_dp[7]}]
-set_property PACKAGE_PIN U20  [get_ports {sns3_dn[7]}]
-#    inout                        sns3_clkp,
-#    inout                        sns3_clkn,
-set_property PACKAGE_PIN T21  [get_ports {sns3_clkp}]
-set_property PACKAGE_PIN U22  [get_ports {sns3_clkn}]
-#    inout                        sns3_scl,
-#    inout                        sns3_sda,
-set_property PACKAGE_PIN Y21  [get_ports {sns3_scl}]
-set_property PACKAGE_PIN AA21 [get_ports {sns3_sda}]
-#    inout                        sns3_ctl,
-#    inout                        sns3_pg,
-set_property PACKAGE_PIN AA20 [get_ports {sns3_ctl}]
-set_property PACKAGE_PIN AB20 [get_ports {sns3_pg}]
-
-# ================= Sensor port 3 =================
-#        inout                  [7:0] sns4_dp,
-#        inout                  [7:0] sns4_dn,
-set_property PACKAGE_PIN V17  [get_ports {sns4_dp[0]}]
-set_property PACKAGE_PIN W18  [get_ports {sns4_dn[0]}]
-
-set_property PACKAGE_PIN Y19  [get_ports {sns4_dp[1]}]
-set_property PACKAGE_PIN AA19 [get_ports {sns4_dn[1]}]
-
-set_property PACKAGE_PIN U19  [get_ports {sns4_dp[2]}]
-set_property PACKAGE_PIN V20  [get_ports {sns4_dn[2]}]
-
-set_property PACKAGE_PIN U18  [get_ports {sns4_dp[3]}]
-set_property PACKAGE_PIN V18  [get_ports {sns4_dn[3]}]
-
-set_property PACKAGE_PIN P18  [get_ports {sns4_dp[4]}]
-set_property PACKAGE_PIN P19  [get_ports {sns4_dn[4]}]
-
-set_property PACKAGE_PIN N17  [get_ports {sns4_dp[5]}]
-set_property PACKAGE_PIN N18  [get_ports {sns4_dn[5]}]
-
-set_property PACKAGE_PIN N20  [get_ports {sns4_dp[6]}]
-set_property PACKAGE_PIN P20  [get_ports {sns4_dn[6]}]
-
-set_property PACKAGE_PIN R17  [get_ports {sns4_dp[7]}]
-set_property PACKAGE_PIN R18  [get_ports {sns4_dn[7]}]
-#    inout                        sns4_clkp,
-#    inout                        sns4_clkn,
-set_property PACKAGE_PIN R16  [get_ports {sns4_clkp}]
-set_property PACKAGE_PIN T16  [get_ports {sns4_clkn}]
-#    inout                        sns4_scl,
-#    inout                        sns4_sda,
-set_property PACKAGE_PIN AB18 [get_ports {sns4_scl}]
-set_property PACKAGE_PIN AB19 [get_ports {sns4_sda}]
-#    inout                        sns4_ctl,
-#    inout                        sns4_pg,
-set_property PACKAGE_PIN Y17  [get_ports {sns4_ctl}]
-set_property PACKAGE_PIN Y18  [get_ports {sns4_pg}]
-
 # ======== GPIO pins ===============
 #    inout           [GPIO_N-1:0] gpio_pins,
 set_property PACKAGE_PIN B4   [get_ports {gpio_pins[0]}]

x393_timing.xdc

@@ -69,15 +69,15 @@ create_clock -name axi_aclk -period 20 [get_nets -hierarchical *axi_aclk]
 ###create_generated_clock -name ddr3_mclk [get_nets */mclk_pre ]
 ###create_generated_clock -name ddr3_clk_ref [get_nets */clk_ref_pre]
 
-####create_generated_clock -name ddr3_sdclk [get_nets -hierarchical sdclk_pre ]
-####create_generated_clock -name ddr3_clk [get_nets -hierarchical clk_pre ]
-####create_generated_clock -name ddr3_clk_div [get_nets -hierarchical clk_div_pre ]
-####create_generated_clock -name ddr3_mclk [get_nets -hierarchical mclk_pre]
-####create_generated_clock -name ddr3_clk_ref [get_nets -hierarchical clk_ref_pre ]
+create_generated_clock -name ddr3_sdclk [get_nets -hierarchical sdclk_pre ]
+create_generated_clock -name ddr3_clk [get_nets -hierarchical clk_pre ]
+create_generated_clock -name ddr3_clk_div [get_nets -hierarchical clk_div_pre ]
+create_generated_clock -name ddr3_mclk [get_nets -hierarchical mclk_pre]
+create_generated_clock -name ddr3_clk_ref [get_nets -hierarchical clk_ref_pre ]
 
 
 
 # do not check timing between axi_aclk and other clocks. Code should provide correct asynchronous crossing of the clock boundary.
-####set_clock_groups -name ps_async_clock -asynchronous -group {axi_aclk}
+set_clock_groups -name ps_async_clock -asynchronous -group {axi_aclk}
 # do not check timing between clk_axihp_pre and other clocks. Code should provide correct asynchronous crossing of the clock boundary.
-####set_clock_groups -name ps_async_clock_axihp -asynchronous -group {clk_axihp_pre}
+set_clock_groups -name ps_async_clock_axihp -asynchronous -group {clk_axihp_pre}