Skip to content

X
x393
Commit ed9b0982 authored by Andrey Filippov's avatar Andrey Filippov
Browse files
Options

just more code, debugging vdt in parallel

parent 2aa6f1d2
Show whitespace changes
Inline Side-by-side
Showing with 197 additions and 8 deletions
phy/byte_lane.v
View file @ ed9b0982
......@@ -25,7 +25,8 @@ module byte_lane #(
parameter IBUF_LOW_PWR ="TRUE",
parameter IOSTANDARD_DQ = "SSTL15_T_DCI",
parameter IOSTANDARD_DQS = "DIFF_SSTL15_T_DCI",
parameter SLEW = "SLOW",
parameter SLEW_DQ = "SLOW",
parameter SLEW_DQS = "SLOW",
parameter real REFCLK_FREQUENCY = 300.0,
parameter HIGH_PERFORMANCE_MODE = "FALSE"
)(
......@@ -47,7 +48,7 @@ module byte_lane #(
output [31:0] dout, // parallel data received from DDR3 memory, 4 bits per DQ I/O
input [7:0] dly_data, // delay value (3 LSB - fine delay)
input [4:0] dly_addr, // select which delay to program
input ld_delay, // load delay data to selected iodelayl (clk_iv synchronous)
input ld_delay, // load delay data to selected iodelay (clk_div synchronous)
input set // clk_div synchronous set all delays from previously loaded values
);
......@@ -96,7 +97,7 @@ generate
.IODELAY_GRP(IODELAY_GRP),
.IBUF_LOW_PWR(IBUF_LOW_PWR),
.IOSTANDARD(IOSTANDARD_DQ),
.SLEW(SLEW),
.SLEW(SLEW_DQ),
.REFCLK_FREQUENCY(REFCLK_FREQUENCY),
.HIGH_PERFORMANCE_MODE(HIGH_PERFORMANCE_MODE)
) dq_i(
......@@ -123,7 +124,7 @@ dq_single #(
.IODELAY_GRP(IODELAY_GRP),
.IBUF_LOW_PWR(IBUF_LOW_PWR),
.IOSTANDARD(IOSTANDARD_DQ),
.SLEW(SLEW),
.SLEW(SLEW_DQ),
.REFCLK_FREQUENCY(REFCLK_FREQUENCY),
.HIGH_PERFORMANCE_MODE(HIGH_PERFORMANCE_MODE)
) dm_i(
......@@ -148,7 +149,7 @@ dqs_single #(
.IODELAY_GRP(IODELAY_GRP),
.IBUF_LOW_PWR(IBUF_LOW_PWR),
.IOSTANDARD(IOSTANDARD_DQS),
.SLEW(SLEW),
.SLEW(SLEW_DQS),
.REFCLK_FREQUENCY(REFCLK_FREQUENCY),
.HIGH_PERFORMANCE_MODE(HIGH_PERFORMANCE_MODE)
) dqs_i (
......
phy/cmd_addr.v
View file @ ed9b0982
......@@ -26,7 +26,7 @@ module cmd_addr #(
parameter SLEW = "SLOW",
parameter real REFCLK_FREQUENCY = 300.0,
parameter HIGH_PERFORMANCE_MODE = "FALSE",
parameter ADDRESS_NUMBER= 15
parameter integer ADDRESS_NUMBER= 15
)(
output [ADDRESS_NUMBER-1:0] ddr3_a, // output address ports (14:0) for 4Gb device
output [2:0] ddr3_ba, // output bank address ports
......
phy/phy_top.v 0 → 100644
View file @ ed9b0982
/*******************************************************************************
* Module: phy_top
* Date:2014-04-30
* Author: Andrey Filippov
* Description: Top module of the DDR3 phy
*
* Copyright (c) 2014 Elphel, Inc.
* phy_top.v is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* phy_top.v is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
`timescale 1ns/1ps
module phy_top #(
parameter IOSTANDARD_DQ = "SSTL15_T_DCI",
parameter IOSTANDARD_DQS = "DIFF_SSTL15_T_DCI",
parameter IOSTANDARD_CMDA = "SSTL15",
parameter SLEW_DQ = "SLOW",
parameter SLEW_DQS = "SLOW",
parameter SLEW_CMDA = "SLOW",
parameter IBUF_LOW_PWR = "TRUE",
parameter IODELAY_GRP = "IODELAY_MEMORY",
parameter real REFCLK_FREQUENCY = 300.0,
parameter HIGH_PERFORMANCE_MODE = "FALSE",
parameter integer ADDRESS_NUMBER= 15
)(
output [ADDRESS_NUMBER-1:0] ddr3_a, // output address ports (14:0) for 4Gb device
output [2:0]ddr3_ba, // output bank address ports
output ddr3_we, // output WE port
output ddr3_ras, // output RAS port
output ddr3_cas, // output CAS port
output ddr3_cke, // output Clock Enable port
output ddr3_odt, // output ODT port
inout [15:0] dq, // DQ I/O pads
inout dml, // LDM I/O pad (actually only output)
inout dqsl, // LDQS I/O pad
inout ndqsl, // ~LDQS I/O pad
inout dmu, // UDM I/O pad (actually only output)
inout dqsu, // UDQS I/O pad
inout ndqsu, // ~UDQS I/O pad
input clk, // free-running system clock, same frequency as iclk (shared for R/W)
input clk_div, // free-running half clk frequency, front aligned to clk (shared for R/W)
input rst_in, // reset delays/serdes
input [2*ADDRESS_NUMBER-1:0] in_a, // input address, 2 bits per signal (first, second) (29:0) for 4Gb device
input [5:0] in_ba, // input bank address, 2 bits per signal (first, second)
input [1:0] in_we, // input WE, 2 bits (first, second)
input [1:0] in_ras, // input RAS, 2 bits (first, second)
input [1:0] in_cas, // input CAS, 2 bits (first, second)
input [1:0] in_cke, // input CKE, 2 bits (first, second)
input [1:0] in_odt, // input ODT, 2 bits (first, second)
input [1:0] in_tri, // tristate command/address outputs - same timing, but no odelay
input [63:0] din, // parallel data to be sent out (4 bits per DG I/))
input [7:0] din_dm, // parallel data to be sent out over DM
input [7:0] tin_dq, // tristate for data out (sent out earlier than data!) and dm
input [7:0] din_dqs, // parallel data to be sent out over DQS
input [7:0] tin_dqs, // tristate for DQS out (sent out earlier than data!)
output [63:0] dout, // parallel data received from DDR3 memory, 4 bits per DQ I/O
input inv_clk_div, // invert clk_div for R channels (clk_div is shared between R and W)
input dci_disable_dqs, // disable DCI termination during writes and idle for dqs
input dci_disable_dq, // disable DCI termination during writes and idle for dq and dm signals
input [7:0] dly_data, // delay value (3 LSB - fine delay)
input [6:0] dly_addr, // select which delay to program
input ld_delay, // load delay data to selected iodelayl (clk_iv synchronous)
input set // clk_div synchronous set all delays from previously loaded values
);
reg rst=1'b0;
always @(posedge clk or posedge rst_in) begin
if (rst_in) rst <= 1'b1;
else rst <= 1'b0;
end
wire ld_data_l = (dly_addr[6:5] == 2'h0) && ld_delay ;
wire ld_data_h = (dly_addr[6:5] == 2'h1) && ld_delay ;
wire ld_cmda = (dly_addr[6:5] == 2'h2) && ld_delay ;
cmd_addr #(
.IODELAY_GRP(IODELAY_GRP),
.IOSTANDARD(IOSTANDARD_CMDA),
.SLEW(SLEW_CMDA),
.REFCLK_FREQUENCY(REFCLK_FREQUENCY),
.HIGH_PERFORMANCE_MODE(HIGH_PERFORMANCE_MODE),
.ADDRESS_NUMBER(ADDRESS_NUMBER)
) cmd_addr_i(
.ddr3_a (ddr3_a[ADDRESS_NUMBER-1:0]), // output address ports (14:0) for 4Gb device
.ddr3_ba (ddr3_ba[2:0]), // output bank address ports
.ddr3_we (ddr3_we), // output WE port
.ddr3_ras (ddr3_ras), // output RAS port
.ddr3_cas (ddr3_cas), // output CAS port
.ddr3_cke (ddr3_cke), // output Clock Enable port
.ddr3_odt (ddr3_odt), // output ODT port
.clk (clk), // free-running system clock, same frequency as iclk (shared for R/W)
.clk_div (clk_div), // free-running half clk frequency, front aligned to clk (shared for R/W)
.rst (rst), // reset delays/serdes
.in_a (in_a[2*ADDRESS_NUMBER-1:0]), // input address, 2 bits per signal (first, second) (29:0) for 4Gb device
.in_ba (in_ba[5:0]), // input bank address, 2 bits per signal (first, second)
.in_we (in_we[1:0]), // input WE, 2 bits (first, second)
.in_ras (in_ras[1:0]), // input RAS, 2 bits (first, second)
.in_cas (in_cas[1:0]), // input CAS, 2 bits (first, second)
.in_cke (in_cke[1:0]), // input CKE, 2 bits (first, second)
.in_odt (in_odt[1:0]), // input ODT, 2 bits (first, second)
.in_tri (in_tri[1:0]), // tristate command/address outputs - same timing, but no odelay
.dly_data (dly_data[7:0]), // delay value (3 LSB - fine delay)
.dly_addr (dly_addr[4:0]), // select which delay to program
.ld_delay (ld_cmda), // load delay data to selected iodelayl (clk_iv synchronous)
.set (set) // clk_div synchronous set all delays from previously loaded values
);
byte_lane #(
.IODELAY_GRP (IODELAY_GRP),
.IBUF_LOW_PWR (IBUF_LOW_PWR),
.IOSTANDARD_DQ (IOSTANDARD_DQ),
.IOSTANDARD_DQS (IOSTANDARD_DQS),
.SLEW_DQ (SLEW_DQ),
.SLEW_DQS (SLEW_DQS),
.REFCLK_FREQUENCY(REFCLK_FREQUENCY),
.HIGH_PERFORMANCE_MODE(HIGH_PERFORMANCE_MODE)
) byte_lane0_i (
.dq (dq[7:0]), // DQ I/O pads
.dm (dml), // DM I/O pad (actually only output)
.dqs (dqsl), // DQS I/O pad
.ndqs (ndqsl), // ~DQS I/O pad
.clk (clk), // free-running system clock, same frequency as iclk (shared for R/W)
.clk_div (clk_div), // free-running half clk frequency, front aligned to clk (shared for R/W)
.inv_clk_div (inv_clk_div), // invert clk_div for R channels (clk_div is shared between R and W)
.rst (rst),
.dci_disable_dqs (dci_disable_dqs), // disable DCI termination during writes and idle for dqs
.dci_disable_dq (dci_disable_dq), // disable DCI termination during writes and idle for dq and dm signals
.din (din[31:0]), // parallel data to be sent out (4 bits per DG I/))
.din_dm (din_dm[3:0]), // parallel data to be sent out over DM
.tin_dq (tin_dq[3:0]), // tristate for data out (sent out earlier than data!) and dm
.din_dqs (din_dqs[3:0]), // parallel data to be sent out over DQS
.tin_dqs (tin_dqs[3:0]), // tristate for DQS out (sent out earlier than data!)
.dout (dout[31:0]), // parallel data received from DDR3 memory, 4 bits per DQ I/O
.dly_data (dly_data[7:0]), // delay value (3 LSB - fine delay)
.dly_addr (dly_addr[4:0]), // select which delay to program
.ld_delay (ld_data_l), // load delay data to selected iodelayl (clk_iv synchronous)
.set (set) // clk_div synchronous set all delays from previously loaded values
);
byte_lane #(
.IODELAY_GRP (IODELAY_GRP),
.IBUF_LOW_PWR (IBUF_LOW_PWR),
.IOSTANDARD_DQ (IOSTANDARD_DQ),
.IOSTANDARD_DQS (IOSTANDARD_DQS),
.SLEW_DQ (SLEW_DQ),
.SLEW_DQS (SLEW_DQS),
.REFCLK_FREQUENCY(REFCLK_FREQUENCY),
.HIGH_PERFORMANCE_MODE(HIGH_PERFORMANCE_MODE)
) byte_lane1_i (
.dq (dq[15:8]), // DQ I/O pads
.dm (dmu), // DM I/O pad (actually only output)
.dqs (dqsu), // DQS I/O pad
.ndqs (ndqsu), // ~DQS I/O pad
.clk (clk), // free-running system clock, same frequency as iclk (shared for R/W)
.clk_div (clk_div), // free-running half clk frequency, front aligned to clk (shared for R/W)
.inv_clk_div (inv_clk_div), // invert clk_div for R channels (clk_div is shared between R and W)
.rst (rst),
.dci_disable_dqs (dci_disable_dqs), // disable DCI termination during writes and idle for dqs
.dci_disable_dq (dci_disable_dq), // disable DCI termination during writes and idle for dq and dm signals
.din (din[63:32]), // parallel data to be sent out (4 bits per DG I/))
.din_dm (din_dm[7:4]), // parallel data to be sent out over DM
.tin_dq (tin_dq[7:4]), // tristate for data out (sent out earlier than data!) and dm
.din_dqs (din_dqs[7:4]), // parallel data to be sent out over DQS
.tin_dqs (tin_dqs[7:4]), // tristate for DQS out (sent out earlier than data!)
.dout (dout[63:32]), // parallel data received from DDR3 memory, 4 bits per DQ I/O
.dly_data (dly_data[7:0]), // delay value (3 LSB - fine delay)
.dly_addr (dly_addr[4:0]), // select which delay to program
.ld_delay (ld_data_h), // load delay data to selected iodelayl (clk_iv synchronous)
.set (set) // clk_div synchronous set all delays from previously loaded values
);
endmodule
phy/wrap/odelay_fine_pipe.v
View file @ ed9b0982
......@@ -23,7 +23,7 @@
module odelay_fine_pipe
//SuppressWarnings VEditor - IODELAY_GRP used in (* *) construnt
# ( parameter IODELAY_GRP = "IODELAY_MEMORY",
parameter integer DELAY_VALUE = 0,
parameter [7:0] DELAY_VALUE = 0,
parameter real REFCLK_FREQUENCY = 200.0,
parameter HIGH_PERFORMANCE_MODE = "FALSE"
) (
......
phy/wrap/oserdes_mem.v
View file @ ed9b0982
......@@ -33,7 +33,7 @@ module oserdes_mem #(
output tout_dly, // tristate out to be connected to odelay input
output tout_iob // tristate out to be connected directly to the tristate control of the output buffer
);
localparam integer MODE_DDR_BIN=(MODE_DDR=="TRUE")?1:0;
//localparam integer MODE_DDR_BIN=(MODE_DDR=="TRUE")?1:0;
localparam DATA_RATE= (MODE_DDR=="TRUE")?"DDR":"SDR";
localparam integer DATA_WIDTH= (MODE_DDR=="TRUE")?4:2;
localparam integer DDR3_DATA= (MODE_DDR=="TRUE")?1:0;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment