Skip to content

X
x393
Commit d8a31b5f authored by Andrey Filippov's avatar Andrey Filippov
Browse files
Options

continue on mclt

parent d054697e
Hide whitespace changes
Inline Side-by-side
Showing with 346 additions and 20 deletions
dsp/mclt16x16.v
View file @ d8a31b5f
...@@ -39,34 +39,360 @@ ...@@ -39,34 +39,360 @@
`timescale 1ns/1ps `timescale 1ns/1ps
module mclt16x16#( module mclt16x16#(
parameter SHIFT_WIDTH = 8, // bits in shift (1 bit - integer, 7 bits - fractional parameter SHIFT_WIDTH = 8, // bits in shift (1 bit - integer, 7 bits - fractional
parameter COORD_WIDTH = 10, // bits in full coordinate 10 for 18K RAM parameter COORD_WIDTH = 10, // bits in full coordinate 10 for 18K RAM
parameter PIXEL_WIDTH = 18, // input pixel width (unsigned) parameter PIXEL_WIDTH = 16, // input pixel width (unsigned)
parameter OUT_WIDTH = 18 // bits in window value (positive) parameter WND_WIDTH = 18, // input pixel width (unsigned)
parameter OUT_WIDTH = 24, // bits in dtt output
parameter DTT_IN_WIDTH = 24, // bits in DTT input
parameter TRANSPOSE_WIDTH = 24, // width of the transpose memory (intermediate results)
parameter OUT_RSHIFT = 2, // overall right shift of the result from input, aligned by MSB (>=3 will never cause saturation)
parameter OUT_RSHIFT2 = 0 // overall right shift for the second (vertical) pass
)( )(
input clk, //!< system clock, posedge input clk, //!< system clock, posedge
input rst, //!< sync reset input rst, //!< sync reset
input en, //!< re (both re and ren - just for power) input start, //!< start convertion of the next 256 samples
input start, //!< start convertion of the next 256 samples input [SHIFT_WIDTH-1:0] x_shft, //!< tile pixel X fractional shift (valid @ start)
input [SHIFT_WIDTH-1:0] x_shft, //!< tile pixel X fractional shift (valid @ start) input [SHIFT_WIDTH-1:0] y_shft, //!< tile pixel Y fractional shift (valid @ start)
input [SHIFT_WIDTH-1:0] y_shft, //!< tile pixel Y fractional shift (valid @ start) input [3:0] bayer, // bayer mask (0 bits - skip pixel, valid @ start)
input [3:0] bayer, // bayer mask (0 bits - skip pixel, valid @ start) output [7:0] mpixel_a, //!< pixel address {y,x} of the input tile
output [7:0] mpixel_a, //!< pixel address {y,x} of the input tile input [PIXEL_WIDTH-1:0] mpixel_d, //!< pixel data, latency = 2 from pixel address
input [PIXEL_WIDTH-1:0] mpixel_d, //!< pixel data, latency = 2 from pixel address output pre2_rdy, //!< after next cycle may be start of the next block
output pre2_rdy, //!< after next cycle may be start of the next block output pre_last_in, //!< may increment page
output pre_last_in, //!< may increment page output pre_first_out,//!< next will output first of DCT/DCT coefficients
output pre_first_out,//!< next will output first of DCT/DCT coefficients output pre_last_out, //!< next will be last output of DST/DST coefficients
output pre_last_out, //!< next will be last output of DST/DST coefficients output [7:0] out_addr, //!< address to save coefficients, 2 MSBs - mode (CC,SC,CS,SS), others - down first
output [7:0] out_addr, //!< address to save coefficients, 2 MSBs - mode (CC,SC,CS,SS), others - down first output dv, //!< output data valid
output dv, //!< output data valid output signed [OUT_WIDTH - 1 : 0] dout //!<frequency domain data output
output [OUT_WIDTH - 1 : 0] dout //<frequency domain data output
); );
reg [SHIFT_WIDTH-1:0] x_shft_r; reg [SHIFT_WIDTH-1:0] x_shft_r;
reg [SHIFT_WIDTH-1:0] y_shft_r; reg [SHIFT_WIDTH-1:0] y_shft_r;
reg [SHIFT_WIDTH-1:0] x_shft_r2;
reg [SHIFT_WIDTH-1:0] y_shft_r2;
reg [3:0] bayer_r; reg [3:0] bayer_r;
reg [3:0] bayer_d; // same latency as mpix_a_w
reg [7:0] in_cntr; // input counter
reg [16:0] in_busy;
wire [17:0] fold_rom_out;
wire [ 7:0] mpix_a_w = fold_rom_out[ 7:0];
wire [ 3:0] mpix_sgn_w = fold_rom_out[11:8];
wire [ 3:0] bayer_1hot = { mpix_a_w[4] & mpix_a_w[0],
mpix_a_w[4] & ~mpix_a_w[0],
~mpix_a_w[4] & mpix_a_w[0],
~mpix_a_w[4] & ~mpix_a_w[0]};
wire mpix_use = |(bayer_d & bayer_1hot); //not disabled by bayer, valid with mpix_a_w
wire mpix_use_d; // delayed
reg mpix_use_r; // delayed
wire [ 3:0] mpix_sgn_d;
reg [ 3:0] mpix_sgn_r;
wire [WND_WIDTH-1:0] window_w;
reg [WND_WIDTH-1:0] window_r;
reg [PIXEL_WIDTH-1:0] mpixel_d_r; // registered pixel data (to be absorbed by MPY)
reg [PIXEL_WIDTH + WND_WIDTH - 1:0] pix_wnd_r;
reg [DTT_IN_WIDTH-1:0] pix_wnd_r2; // pixels (positive) multiplied by window(positive), two MSBs == 2'b0 to prevent overflow
// parameter DTT_IN_WIDTH = 24
// wire [DTT_IN_WIDTH-3:0] pix_wnd = pix_wnd_r[PIXEL_WIDTH + WND_WIDTH - 1 -: DTT_IN_WIDTH-2];
reg [DTT_IN_WIDTH-1:0] data_cc_r;
reg [DTT_IN_WIDTH-1:0] data_sc_r;
reg [DTT_IN_WIDTH-1:0] data_cs_r;
reg [DTT_IN_WIDTH-1:0] data_ss_r;
// delay data to appear at different time slots from data_cc_r
wire [DTT_IN_WIDTH-1:0] data_sc_w0; // delayed by 1 cycle
wire [DTT_IN_WIDTH-1:0] data_cs_w1; // delayed by 2 cycles
wire [DTT_IN_WIDTH-1:0] data_ss_w2; // delayed by 3 cycles
reg [DTT_IN_WIDTH-1:0] data_dtt_in; // multiplexed DTT input data
reg [1:0] mode_mux;
reg [7:0] dtt_in_cntr; //
reg dtt_in_page;
wire [8:0] dtt_in_wa = {dtt_in_page, dtt_in_cntr[1:0], dtt_in_cntr[7:2]};
wire dtt_we = in_busy[16];
wire var_first_d; // adding subtracting first variant of 4 folds
reg var_first_r; // adding subtracting first variant of 4 folds
wire var_last; // next cycle the data_xx_r will have data (in_busy[14], ...)
// reading/converting DTT
wire start_dtt = dtt_in_cntr == 196; // fune tune? ~= 3/4 of 256
reg [7:0] dtt_r_cntr; //
reg dtt_r_page;
reg dtt_r_re;
reg dtt_r_regen;
reg dtt_start;
wire [1:0] dtt_mode = {dtt_r_cntr[7], dtt_r_cntr[6]}; // TODO: or reverse?
wire [8:0] dtt_r_ra = {dtt_r_page,dtt_r_cntr};
wire [35:0] dtt_r_data_w; // high bits are not used
wire [DTT_IN_WIDTH-1:0] dtt_r_data = dtt_r_data_w[DTT_IN_WIDTH-1:0];
always @ (posedge clk) begin always @ (posedge clk) begin
if (start) begin
x_shft_r <= x_shft;
y_shft_r <= y_shft;
bayer_r <= bayer;
end
if (in_busy[2]) begin // same latency as mpix_a_w
x_shft_r2 <= x_shft_r;
y_shft_r2 <= y_shft_r;
end
if (in_busy[2]) bayer_d <= bayer_r;
if (rst) in_busy <= 0;
else if (start) in_busy <= 1;
else in_busy <= {in_busy[15:0], in_busy[0] & ~(&in_cntr)};
if (start) in_cntr <= 0;
else if (in_busy[0]) in_cntr[7:0] <= in_cntr[7:0] + 1;
if (in_busy[8]) begin
mpixel_d_r <= mpixel_d;
window_r <= window_w;
end
if (in_busy[9]) pix_wnd_r <= mpixel_d_r * window_r;
if (in_busy[10]) pix_wnd_r2 <= {2'b00,pix_wnd_r[PIXEL_WIDTH + WND_WIDTH - 1 -: DTT_IN_WIDTH - 2]};
if (in_busy[10]) begin
mpix_use_r <= mpix_use_d;
var_first_r <= var_first_d;
mpix_sgn_r <= mpix_sgn_d;
end
if (in_busy[11]) begin
data_cc_r <= (var_first_r ? {DTT_IN_WIDTH{1'b0}} : data_cc_r) + mpix_use_r ? (mpix_sgn_r[0]?(-pix_wnd_r2):pix_wnd_r2): {DTT_IN_WIDTH{1'b0}} ;
data_sc_r <= (var_first_r ? {DTT_IN_WIDTH{1'b0}} : data_sc_r) + mpix_use_r ? (mpix_sgn_r[1]?(-pix_wnd_r2):pix_wnd_r2): {DTT_IN_WIDTH{1'b0}} ;
data_cs_r <= (var_first_r ? {DTT_IN_WIDTH{1'b0}} : data_cs_r) + mpix_use_r ? (mpix_sgn_r[2]?(-pix_wnd_r2):pix_wnd_r2): {DTT_IN_WIDTH{1'b0}} ;
data_ss_r <= (var_first_r ? {DTT_IN_WIDTH{1'b0}} : data_ss_r) + mpix_use_r ? (mpix_sgn_r[3]?(-pix_wnd_r2):pix_wnd_r2): {DTT_IN_WIDTH{1'b0}} ;
end
if (var_last) mode_mux <= 0;
else if (in_busy[15]) mode_mux <= mode_mux + 1;
if (in_busy[15]) case (mode_mux)
2'b00: data_dtt_in <= data_cc_r;
2'b01: data_dtt_in <= data_sc_w0;
2'b10: data_dtt_in <= data_cs_w1;
2'b11: data_dtt_in <= data_ss_w2;
endcase
if (!in_busy[16]) dtt_in_cntr <= 0;
else dtt_in_cntr <= dtt_in_cntr + 1;
if (rst) dtt_in_page <= 0;
else if (&dtt_in_cntr) dtt_in_page <= dtt_in_page + 1;
// reading memory and running DTT
if (start_dtt) dtt_r_page <=dtt_in_page;
if (rst) dtt_r_re <= 1'b0;
else if (start_dtt) dtt_r_re <= 1'b1;
else if (&dtt_r_cntr) dtt_r_re <= 1'b0;
dtt_r_regen <= dtt_r_re;
if (!dtt_r_re) dtt_r_cntr <= 0;
else dtt_r_cntr <= dtt_r_cntr + 1;
dtt_start <= dtt_r_cntr[5:0] == 0;
end end
/*
Calculate ROM for MCLT fold indices:
A0..A1 - variant, folding to the same 8x8 sample
A2..A4 - sample column in folded 8x8 tile
A5..A7 - sample row in folded 8x8 tile
D0..D4 - pixel column in 16x16 tile
D5..D7 - pixel row in 16x16 tile
D8 - negate for mode 0 (CC)
D9 - negate for mode 1 (SC)
D10 - negate for mode 2 (CS)
D11 - negate for mode 3 (SS)
*/
// May serve 2 mclt16x16 channels when using 2 ports
ram18tp_var_w_var_r #(
.REGISTERS_A(1),
.REGISTERS_B(1),
.LOG2WIDTH_A(4),
.LOG2WIDTH_B(4)
`ifdef PRELOAD_BRAMS
`include "mclt_fold_rom.vh"
`endif
) i_mclt_fold_rom (
.clk_a (clk), // input
.addr_a ({2'b0,in_cntr[1:0],in_cntr[7:2]}), // input[9:0]
.en_a (in_busy[1]), // input
.regen_a (in_busy[2]), // input
.we_a (1'b0), // input
.data_out_a(fold_rom_out), // output[17:0]
.data_in_a (18'b0), // input[17:0]
// port B may be used for other mclt16x16
.clk_b (1'b0), // input
.addr_b (10'b0), // input[9:0]
.en_b (1'b0), // input
.regen_b (1'b0), // input
.we_b (1'b0), // input
.data_out_b(), // output[17:0]
.data_in_b (18'b0) // input[17:0]
);
// Latency = 5
mclt_wnd_mul #(
.SHIFT_WIDTH (SHIFT_WIDTH),
.COORD_WIDTH (COORD_WIDTH),
.OUT_WIDTH (WND_WIDTH)
) mclt_wnd_i (
.clk (clk), // input
.en (in_busy[3]), // input
.x_in (mpix_a_w[3:0]), // input[3:0]
.y_in (mpix_a_w[7:4]), // input[3:0]
.x_shft (x_shft_r2), // input[7:0]
.y_shft (y_shft_r2), // input[7:0]
.wnd_out (window_w) // output[17:0] valid with in_busy[8]
);
// Matching window latency with pixel data latency
dly_var #(
.WIDTH(8),
.DLY_WIDTH(4)
) dly_pixel_data_i (
.clk (clk), // input
.rst (rst), // input
.dly (4'h2), // input[3:0] Delay for external memory latency = 2, reduce for higher
.din (mpix_a_w), // input[0:0]
.dout (mpixel_a) // output[0:0]
);
dly_var #(
.WIDTH(1),
.DLY_WIDTH(4)
) dly_var_first_i (
.clk (clk), // input
.rst (rst), // input
.dly (4'h8), // input[3:0]
.din (in_busy[0] && (in_cntr[1:0] == 0)), // input[0:0]
.dout (var_first_d) // output[0:0]
);
dly_var #(
.WIDTH(1),
.DLY_WIDTH(4)
) dly_mpix_use_i (
.clk (clk), // input
.rst (rst), // input
.dly (4'h6), // input[3:0]
.din (mpix_use), // input[0:0]
.dout (mpix_use_d) // output[0:0]
);
dly_var #(
.WIDTH(4),
.DLY_WIDTH(4)
) dly_mpix_sgn_i (
.clk (clk), // input
.rst (rst), // input
.dly (4'h6), // input[3:0]
.din (mpix_sgn_w), // input[0:0]
.dout (mpix_sgn_d) // output[0:0]
);
dly_var #(
.WIDTH(DTT_IN_WIDTH),
.DLY_WIDTH(4)
) dly_data_sc_w0_i (
.clk (clk), // input
.rst (rst), // input
.dly (4'h0), // input[3:0]
.din (data_sc_r), // input[0:0]
.dout (data_sc_w0) // output[0:0]
);
dly_var #(
.WIDTH(DTT_IN_WIDTH),
.DLY_WIDTH(4)
) dly_data_cs_w1_i (
.clk (clk), // input
.rst (rst), // input
.dly (4'h1), // input[3:0]
.din (data_cs_r), // input[0:0]
.dout (data_cs_w1) // output[0:0]
);
dly_var #(
.WIDTH(DTT_IN_WIDTH),
.DLY_WIDTH(4)
) dly_data_ss_w2_i (
.clk (clk), // input
.rst (rst), // input
.dly (4'h2), // input[3:0]
.din (data_ss_r), // input[0:0]
.dout (data_ss_w2) // output[0:0]
);
dly_var #(
.WIDTH(1),
.DLY_WIDTH(4)
) dly_var_last_i (
.clk (clk), // input
.rst (rst), // input
.dly (4'h2), // input[3:0]
.din (var_first_r & in_busy[11]), // input[0:0]
.dout (var_last) // output[0:0]
);
ram18p_var_w_var_r #(
.REGISTERS(1),
.LOG2WIDTH_WR(5),
.LOG2WIDTH_RD(5)
) ram18p_var_w_var_r_dtt_in_i (
.rclk (clk), // input
.raddr (dtt_r_ra), // input[8:0]
.ren (dtt_r_re), // input
.regen (dtt_r_regen), // input
.data_out (dtt_r_data_w), // output[35:0]
.wclk (clk), // input
.waddr (dtt_in_wa), // input[8:0]
.we (dtt_we), // input
.web (4'hf), // input[3:0]
.data_in ({{(36-DTT_IN_WIDTH){1'b0}}, data_dtt_in}) // input[35:0]
);
dtt_iv_8x8 #(
.INPUT_WIDTH (DTT_IN_WIDTH),
.OUT_WIDTH (OUT_WIDTH),
.OUT_RSHIFT1 (OUT_RSHIFT),
.OUT_RSHIFT2 (OUT_RSHIFT2),
.TRANSPOSE_WIDTH (TRANSPOSE_WIDTH),
.DSP_B_WIDTH (18),
.DSP_A_WIDTH (25),
.DSP_P_WIDTH (48)
) dtt_iv_8x8_i (
.clk (clk), // input
.rst (rst), // input
.start (dtt_start), // input
.mode (dtt_mode), // input[1:0]
.xin (dtt_r_data), // input[24:0] signed
.pre_last_in (), // output reg
.pre_first_out (pre_first_out_2d), // output
.dv (dv), // output
.d_out (dout), // output[24:0] signed
.mode_out (mode_out), // output[1:0] reg
.pre_busy (pre_busy_2d) // output reg
);
endmodule endmodule
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment