added nedw fields to c-export

includes/x393_parameters.vh

@@ -508,11 +508,6 @@
 //`elsif BOSON
         parameter SENS_CTRL_GP2=         18,  // 20:18 00 - float, 01 - low, 10 - high, 11 - trigger
         parameter SENS_CTRL_GP3=         21,  // 23:21 00 - float, 01 - low, 10 - high, 11 - trigger
-        parameter SENS_UART_EXTIF_EN =    0,  //  1: 0
-        parameter SENS_UART_XMIT_RST =    2,  //  3: 2
-        parameter SENS_UART_RECV_RST =    4,  //  5: 4
-        parameter SENS_UART_XMIT_START =  6,  //  6
-        parameter SENS_UART_RECV_NEXT =   7,  //  7
         parameter SENS_ALT_STATUS =      24,
         parameter SENS_ALT_STATUS_SET =  25,
         parameter SENS_TEST_MODES =      26,
@@ -520,6 +515,12 @@
         parameter SENS_TEST_SET=         29,
         parameter SENS_CTRL_DPR=         30,  // 30:31 DRP command
 
+        parameter SENS_UART_EXTIF_EN =    0,  //  1: 0
+        parameter SENS_UART_XMIT_RST =    2,  //  3: 2
+        parameter SENS_UART_RECV_RST =    4,  //  5: 4
+        parameter SENS_UART_XMIT_START =  6,  //  6
+        parameter SENS_UART_RECV_NEXT =   7,  //  7
+        
         parameter SENS_TEST_WIDTH_BITS = 10,
         parameter SENS_TEST_HEIGHT_BITS= 10,
         parameter SENS_TEST_WIDTH_INC =   3,

py393/x393_export_c.py

@@ -1912,8 +1912,10 @@ class X393ExportC(object):
 
     def _enc_status_sens_io_boson(self):
         dw=[]
-        dw.append(("ps_out",                 0, 8,0,  "Sensor MMCM current phase"))
-        dw.append(("ps_rdy",                 8, 1,0,  "Sensor MMCM phase ready"))
+#        dw.append(("ps_out",                 0, 8,0,  "Sensor MMCM current phase"))
+#        dw.append(("ps_rdy",                 8, 1,0,  "Sensor MMCM phase ready"))
+        dw.append(("drp_odd_bit",            0, 1,0,  "Alternating even/odd bit from the MMCM/PLL DRP controller"))
+        dw.append(("drp_bit",                1, 1,0,  "Read data bit (big-endian) from the MMCM/PLL DRP controller"))
         dw.append(("perr",                   9, 1,0,  "Parity error in video stream"))
         dw.append(("recv_odd_even",         10, 1,0,  "UART receive odd/even output byte (next byte should have it inverted)"))
         dw.append(("clkin_pxd_stopped_mmcm",11, 1,0,  "Sensor MMCM input clock stopped"))
@@ -2207,6 +2209,11 @@ class X393ExportC(object):
         dw.append(("gp2_set",        vrlg.SENS_CTRL_GP2 + 2,      1,   0,  "Set GP2 to 'gp2' value"))
         dw.append(("gp3",            vrlg.SENS_CTRL_GP3,          2,   0 , "GP3 multi-purpose signal to the sensor: 0 - float, 1 - low, 2 - high, 3 - TRIG"))
         dw.append(("gp3_set",        vrlg.SENS_CTRL_GP3 + 2,      1,   0,  "Set GP3 to 'gp3' value"))
+        dw.append(("alt_status",     vrlg.SENS_ALT_STATUS,        1,   0 , "Alternative status map to test serial communication parity"))
+        dw.append(("alt_status_set", vrlg.SENS_ALT_STATUS_SET,    1,   0,  "Set alt_status"))
+        dw.append(("test_modes",     vrlg.SENS_TEST_MODES, vrlg.SENS_TEST_BITS,   0 , "Test pattern modes"))
+        dw.append(("test_modes_set", vrlg.SENS_TEST_SET,          1,   0,  "Set test_modes bits"))
+        dw.append(("drp_cmd",        vrlg.SENS_CTRL_DPR,          2,   0,  "MMCM/PLL DRP control: 0 - nop, 1 - shift 0, 2 - shift 1, 3 - execute"))
         return dw
     
     def _enc_sensio_jtag(self):