Skip to content

X
x393
Commit b197095f authored by Andrey Filippov's avatar Andrey Filippov
Browse files
Options

updated settings

parent 2e9bd272
Show whitespace changes
Inline Side-by-side
Showing with 132 additions and 49 deletions
.eclipse_project_setup/.project
View file @ b197095f
...@@ -48,51 +48,4 @@ ...@@ -48,51 +48,4 @@
<nature>com.elphel.vdt.veditor.HdlNature</nature> <nature>com.elphel.vdt.veditor.HdlNature</nature>
<nature>org.python.pydev.pythonNature</nature> <nature>org.python.pydev.pythonNature</nature>
</natures> </natures>
<linkedResources>
<link>
<name>vivado_logs/VivadoBitstream.log</name>
<type>1</type>
<location>/home/andrey/git/x393-neon/vivado_logs/VivadoBitstream-20160713221922665.log</location>
</link>
<link>
<name>vivado_logs/VivadoOpt.log</name>
<type>1</type>
<location>/home/andrey/git/x393-neon/vivado_logs/VivadoOpt-20160713221922665.log</location>
</link>
<link>
<name>vivado_logs/VivadoOptPhys.log</name>
<type>1</type>
<location>/home/andrey/git/x393-neon/vivado_logs/VivadoOptPhys-20160713221922665.log</location>
</link>
<link>
<name>vivado_logs/VivadoOptPower.log</name>
<type>1</type>
<location>/home/andrey/git/x393-neon/vivado_logs/VivadoOptPower-20160713221922665.log</location>
</link>
<link>
<name>vivado_logs/VivadoPlace.log</name>
<type>1</type>
<location>/home/andrey/git/x393-neon/vivado_logs/VivadoPlace-20160713221922665.log</location>
</link>
<link>
<name>vivado_logs/VivadoRoute.log</name>
<type>1</type>
<location>/home/andrey/git/x393-neon/vivado_logs/VivadoRoute-20160713221922665.log</location>
</link>
<link>
<name>vivado_logs/VivadoSynthesis.log</name>
<type>1</type>
<location>/home/andrey/git/x393-neon/vivado_logs/VivadoSynthesis-20160713221027219.log</location>
</link>
<link>
<name>vivado_logs/VivadoTimimgSummaryReportImplemented.log</name>
<type>1</type>
<location>/home/andrey/git/x393-neon/vivado_logs/VivadoTimimgSummaryReportImplemented-20160713221922665.log</location>
</link>
<link>
<name>vivado_state/x393-synth.dcp</name>
<type>1</type>
<location>/home/andrey/git/x393-neon/vivado_state/x393-synth-20160713203728437.dcp</location>
</link>
</linkedResources>
</projectDescription> </projectDescription>
.eclipse_project_setup/.settings/com.elphel.vdt.VivadoBitstream.prefs
View file @ b197095f
VivadoBitstream_@_PreBitstreamTCL=set_property BITSTREAM.STARTUP.MATCH_CYCLE NoWait [current_design]<-@\#\#@-> VivadoBitstream_@_PreBitstreamTCL=set_property BITSTREAM.STARTUP.MATCH_CYCLE NoWait [current_design]<-@\#\#@->
VivadoBitstream_@_force=true VivadoBitstream_@_force=true
VivadoBitstream_@_rawfile=x393_hispi VivadoBitstream_@_rawfile=x393_parallel
com.elphel.store.context.VivadoBitstream=VivadoBitstream_@_rawfile<-@\#\#@->VivadoBitstream_@_force<-@\#\#@->VivadoBitstream_@_PreBitstreamTCL<-@\#\#@-> com.elphel.store.context.VivadoBitstream=VivadoBitstream_@_rawfile<-@\#\#@->VivadoBitstream_@_force<-@\#\#@->VivadoBitstream_@_PreBitstreamTCL<-@\#\#@->
eclipse.preferences.version=1 eclipse.preferences.version=1
.eclipse_project_setup/.settings/com.elphel.vdt.cocotb.prefs
View file @ b197095f
cocotb_@_COCOTB_DEBUG=true cocotb_@_COCOTB_DEBUG=false
cocotb_@_CocotbDutTopFile=cocotb/x393_dut.v cocotb_@_CocotbDutTopFile=cocotb/x393_dut.v
cocotb_@_CocotbExtraFiles=glbl.v<-@\#\#@-> cocotb_@_CocotbExtraFiles=glbl.v<-@\#\#@->
cocotb_@_CocotbIncludeDir=${verilog_project_loc}/includes<-@\#\#@->${verilog_project_loc}/ddr3<-@\#\#@->${verilog_project_loc}/x393_sata<-@\#\#@->${verilog_project_loc}/x393_sata/host<-@\#\#@-> cocotb_@_CocotbIncludeDir=${verilog_project_loc}/includes<-@\#\#@->${verilog_project_loc}/ddr3<-@\#\#@->${verilog_project_loc}/x393_sata<-@\#\#@->${verilog_project_loc}/x393_sata/host<-@\#\#@->
......
.eclipse_project_setup/.settings/org.eclipse.core.resources.prefs
View file @ b197095f
eclipse.preferences.version=1 eclipse.preferences.version=1
encoding//attic/gen_hist_test.py=utf-8
encoding//helpers/convert_data_to_params.py=utf-8 encoding//helpers/convert_data_to_params.py=utf-8
encoding//helpers/convert_pass_init_params.py=utf-8 encoding//helpers/convert_pass_init_params.py=utf-8
encoding//helpers/convert_zigzag_rom.py=utf-8 encoding//helpers/convert_zigzag_rom.py=utf-8
......
py393/x393_jpeg.py
View file @ b197095f
...@@ -2030,6 +2030,135 @@ set_camsync_mode None None None 0 ...@@ -2030,6 +2030,135 @@ set_camsync_mode None None None 0
jpeg_sim_multi 4 jpeg_sim_multi 4
jpeg_sim_multi 8 jpeg_sim_multi 8
################## Simulate Parallel 10 - external trigger ####################
./py393/test_mcntrl.py @py393/cocoargs --simulated=localhost:7777
measure_all "*DI"
setup_all_sensors True None 0xf
set_sensor_io_ctl all None None 1 # Set ARO low - check if it is still needed?
#just testing
set_gpio_ports 1 1 # enable software gpio pins and porta (camsync)
set_gpio_pins 0 1 # pin 0 low, pin 1 - high
set_camsync_period 31 # set bit duration
set_camsync_period 8000 # 80 usec
set_camsync_delay 0 400
set_camsync_delay 1 100
set_camsync_delay 2 200
set_camsync_delay 3 300
#set_camsync_inout <is_out> <bit_number> <active_positive>
set_camsync_inout 1 8 0
#set_camsync_inout 0 7 0
reset_camsync_inout 0 # start with internal trigger
#set_camsync_mode <en=None> <en_snd=None> <en_ts_external=None> <triggered_mode=None> <master_chn=None> <chn_en=None>
set_camsync_mode 1 1 1 1 0 0xf
set_sensor_histogram_window 0 0 4 4 25 21
set_sensor_histogram_window 1 0 4 4 41 21
set_sensor_histogram_window 2 0 4 4 25 41
set_sensor_histogram_window 3 0 4 4 41 41
r
read_control_register 0x430
read_control_register 0x431
write_cmd_frame_sequencer 0 1 2 0x600 0x48 # compressor q page = 1 // too late for frame 2
set_qtables 0 0 80
set_qtables 0 1 70
#irq coming, image not changing - yes
write_cmd_frame_sequencer 0 1 1 0x686 0x280005 #save 4 more lines than sensor has
write_cmd_frame_sequencer 0 1 1 0x680 0x5507 #enable abort
#write_cmd_frame_sequencer 0 1 1 0x6c6 0x300006 #save 4 more lines that compressor has
write_cmd_frame_sequencer 0 1 2 0x600 0x5 #stop compressor `
write_cmd_frame_sequencer 0 1 2 0x680 0x5405 # stop sensor memory (+0) // sensor memory should be controlled first, (9 commands
write_cmd_frame_sequencer 0 1 2 0x6c0 0x5c49 # stop compressor memory (+0)
write_cmd_frame_sequencer 0 1 3 0x686 0x240005 # correct lines
write_cmd_frame_sequencer 0 1 3 0x680 0x5507 # run sensor memory (+1) Can not be 0
write_cmd_frame_sequencer 0 1 4 0x686 0x280005 #save 4 more lines than sensor has
write_cmd_frame_sequencer 0 1 4 0x6c6 0x300006 #save more lines than compressor needs (sensor provides)
write_cmd_frame_sequencer 0 1 4 0x6c0 0x7d4b # run compressor memory (+2)
write_cmd_frame_sequencer 0 1 4 0x600 0x7 # run compressor (+0)
write_cmd_frame_sequencer 0 1 1 0x600 0x48 # compressor q page = 1
write_cmd_frame_sequencer 0 1 4 0x600 0x40 # compressor q page = 0
read_control_register 0x431
read_control_register 0x430
#testing histograms
write_control_register 0x409 0xc0
#sequencer test
#ctrl_cmd_frame_sequencer <num_sensor> <reset=False> <start=False> <stop=False>
ctrl_cmd_frame_sequencer 0 0 1 0
write_cmd_frame_sequencer 0 1 1 0x700 0x6
write_cmd_frame_sequencer 0 1 1 0x700 0x9
write_cmd_frame_sequencer 0 1 1 0x700 0xa0
write_cmd_frame_sequencer 0 1 1 0x700 0x50
#write_cmd_frame_sequencer 0 0 3 0x700 0xa000
write_cmd_frame_sequencer 0 1 0 0x700 0x90
#write_cmd_frame_sequencer 0 0 2 0x700 0xe00
write_cmd_frame_sequencer 0 0 3 0x700 0xa
write_cmd_frame_sequencer 0 0 2 0x700 0x6
write_cmd_frame_sequencer 0 0 2 0x700 0x9
write_cmd_frame_sequencer 0 0 2 0x700 0x60
write_cmd_frame_sequencer 0 0 2 0x700 0x90
#write_cmd_frame_sequencer 0 0 2 0x700 0x600
#write_cmd_frame_sequencer 0 0 2 0x700 0x900
r
read_status 0x21
r
#set_sensor_io_dly_hispi all 0x48 0x68 0x68 0x68 0x68
#set_sensor_io_ctl all None None None None None 1 None # load all delays?
compressor_control all None None None None None 2
compressor_interrupt_control all clr
compressor_interrupt_control all en
compressor_control all 3
r
read_status 0x21
r
jpeg_sim_multi 4
r
read_status 0x21
r
jpeg_sim_multi 3
r
read_status 0x21
r
write_cmd_frame_sequencer 0 1 1 0x686 0x240005 # correct lines
write_cmd_frame_sequencer 0 1 1 0x6c6 0x200006 # correct lines
write_cmd_frame_sequencer 0 1 1 0x680 0x5507 # run sensor memory, update frame#, reset buffers
write_cmd_frame_sequencer 0 1 1 0x6c0 0x7d4b # run compressor memory
write_cmd_frame_sequencer 0 1 1 0x600 0x7 # run compressor
#switch to external (wired) trigger
set_camsync_inout 0 7 0
jpeg_sim_multi 4
###switch to external (wired) trigger
##set_camsync_inout 0 7 0
jpeg_sim_multi 4
#set_camsync_mode <en=None> <en_snd=None> <en_ts_external=None> <triggered_mode=None> <master_chn=None> <chn_en=None>
#keeping external trigger mode (#9 was switching to internal)
#set_camsync_mode None None None 0
jpeg_sim_multi 4
jpeg_sim_multi 8
################## Serial #################### ################## Serial ####################
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment