Skip to content

X
x393
Commit a821207d authored by Andrey Filippov's avatar Andrey Filippov
Browse files
Options

Fixed GCC reported errors, added includes

parent 8c3c3a8a
Show whitespace changes
Inline Side-by-side
Showing with 320 additions and 307 deletions
py393/generated/x393.c
View file @ a821207d
This source diff could not be displayed because it is too large. You can view the blob instead.
py393/generated/x393.h
View file @ a821207d
......@@ -5,6 +5,10 @@
* Description: Constants definitions and functions declarations to access x393 hardware registers
*******************************************************************************/
#include "elphel/types.h"
//#include "elphel/x393_defs.h // alternative variant"
// R/W addresses to set up memory arbiter priorities. For sensors (chn = 8..11), for compressors - 12..15
void set_x393_mcntrl_arbiter_priority (x393_arbite_pri_t d, int chn); // Set memory arbiter priority (currently r/w, may become just wo)
......@@ -158,8 +162,8 @@ x393_status_membridge_t x393_membridge_status (void);
void x393_sens_mode (x393_sens_mode_t d, int sens_num); // Write sensor channel mode
void x393_sensi2c_ctrl (x393_i2c_ctltbl_t d, int sens_num); // Control sensor i2c, write i2c LUT
void set_x393_sensi2c_status (x393_status_ctrl_t d, int sens_num); // Setup sensor i2c status report mode
x393_status_ctrl_t get_x393_sensi2c_status (int sens_num);
void set_x393_sensi2c_status_ctrl (x393_status_ctrl_t d, int sens_num); // Setup sensor i2c status report mode
x393_status_ctrl_t get_x393_sensi2c_status_ctrl (int sens_num);
void x393_sens_sync_mult (x393_sens_sync_mult_t d, int sens_num); // Configure frames combining
void x393_sens_sync_late (x393_sens_sync_late_t d, int sens_num); // Configure frame sync delay
void x393_sensio_ctrl (x393_sensio_ctl_t d, int sens_num); // Configure sensor I/O port
......
py393/generated/x393_defs.h
View file @ a821207d
......@@ -131,7 +131,7 @@
#define X393_SENS_MODE(sens_num) (0x40001000 + 0x100 * (sens_num)) // Write sensor channel mode, sens_num = 0..3, data type: x393_sens_mode_t (wo)
#define X393_SENSI2C_CTRL(sens_num) (0x40001008 + 0x100 * (sens_num)) // Control sensor i2c, write i2c LUT, sens_num = 0..3, data type: x393_i2c_ctltbl_t (wo)
#define X393_SENSI2C_STATUS(sens_num) (0x4000100c + 0x100 * (sens_num)) // Setup sensor i2c status report mode, sens_num = 0..3, data type: x393_status_ctrl_t (rw)
#define X393_SENSI2C_STATUS_CTRL(sens_num) (0x4000100c + 0x100 * (sens_num)) // Setup sensor i2c status report mode, sens_num = 0..3, data type: x393_status_ctrl_t (rw)
#define X393_SENS_SYNC_MULT(sens_num) (0x40001018 + 0x100 * (sens_num)) // Configure frames combining, sens_num = 0..3, data type: x393_sens_sync_mult_t (wo)
#define X393_SENS_SYNC_LATE(sens_num) (0x4000101c + 0x100 * (sens_num)) // Configure frame sync delay, sens_num = 0..3, data type: x393_sens_sync_late_t (wo)
#define X393_SENSIO_CTRL(sens_num) (0x40001020 + 0x100 * (sens_num)) // Configure sensor I/O port, sens_num = 0..3, data type: x393_sensio_ctl_t (wo)
......@@ -158,8 +158,8 @@
// in the table. Slave address is always in byte 2 (bits 23:16), byte1 (high register address) is skipped if
// read address in the table is programmed to be a single-byte one
#define X393_SENSI2C_ABS((sens_num),(offset)) (0x40001040)+ 0x40 * (sens_num)+ 0x1 * (offset)) // Write sensor i2c sequencer, sens_num = 0..3, offset = 0..15, data type: u32 (wo)
#define X393_SENSI2C_REL((sens_num),(offset)) (0x40001080)+ 0x40 * (sens_num)+ 0x1 * (offset)) // Write sensor i2c sequencer, sens_num = 0..3, offset = 0..15, data type: u32 (wo)
#define X393_SENSI2C_ABS(sens_num,offset) (0x40001040)+ 0x40 * (sens_num)+ 0x1 * (offset)) // Write sensor i2c sequencer, sens_num = 0..3, offset = 0..15, data type: u32 (wo)
#define X393_SENSI2C_REL(sens_num,offset) (0x40001080)+ 0x40 * (sens_num)+ 0x1 * (offset)) // Write sensor i2c sequencer, sens_num = 0..3, offset = 0..15, data type: u32 (wo)
// Lens vignetting correction (for each sub-frame separately)
......@@ -357,8 +357,8 @@
// [13:12] - 3 - run seq, 2 - stop seq , 1,0 - no change to run state
// [1:0] - 0: NOP, 1: clear IRQ, 2 - Clear IE, 3: set IE
#define X393_CMDFRAMESEQ_CTRL(sens_chn) (0x40001e7c + 0x80 * (sens_chn)) // CMDFRAMESEQ control register, sens_chn = 0..3, data type: x393_cmdframeseq_mode_t (wo)
#define X393_CMDFRAMESEQ_ABS((sens_chn),(offset)) (0x40001e00)+ 0x20 * (sens_chn)+ 0x1 * (offset)) // CMDFRAMESEQ absolute frame address/command, sens_chn = 0..3, offset = 0..15, data type: u32 (wo)
#define X393_CMDFRAMESEQ_REL((sens_chn),(offset)) (0x40001e40)+ 0x20 * (sens_chn)+ 0x1 * (offset)) // CMDFRAMESEQ relative frame address/command, sens_chn = 0..3, offset = 0..14, data type: u32 (wo)
#define X393_CMDFRAMESEQ_ABS(sens_chn,offset) (0x40001e00)+ 0x20 * (sens_chn)+ 0x1 * (offset)) // CMDFRAMESEQ absolute frame address/command, sens_chn = 0..3, offset = 0..15, data type: u32 (wo)
#define X393_CMDFRAMESEQ_REL(sens_chn,offset) (0x40001e40)+ 0x20 * (sens_chn)+ 0x1 * (offset)) // CMDFRAMESEQ relative frame address/command, sens_chn = 0..3, offset = 0..14, data type: u32 (wo)
// Command sequencer multiplexer, provides current frame number for each sesnor channel and interrupt status/interrupt masks for them.
// Interrupts and interrupt masks are controlled through channel CMDFRAMESEQ module
#define X393_CMDSEQMUX_STATUS_CTRL 0x40001c08 // CMDSEQMUX status control mode (status provides current frame numbers), data type: x393_status_ctrl_t (rw)
......
py393/generated/x393_map.h
View file @ a821207d
......@@ -183,7 +183,7 @@
#define X393_SENS_MODE__0 0x40001000 // Write sensor channel mode, data type: x393_sens_mode_t (wo)
// RESERVED: 0x1 DWORD
#define X393_SENSI2C_CTRL__0 0x40001008 // Control sensor i2c, write i2c LUT, data type: x393_i2c_ctltbl_t (wo)
#define X393_SENSI2C_STATUS__0 0x4000100c // Setup sensor i2c status report mode, data type: x393_status_ctrl_t (rw)
#define X393_SENSI2C_STATUS_CTRL__0 0x4000100c // Setup sensor i2c status report mode, data type: x393_status_ctrl_t (rw)
// RESERVED: 0x2 DWORDs
#define X393_SENS_SYNC_MULT__0 0x40001018 // Configure frames combining, data type: x393_sens_sync_mult_t (wo)
#define X393_SENS_SYNC_LATE__0 0x4000101c // Configure frame sync delay, data type: x393_sens_sync_late_t (wo)
......@@ -246,7 +246,7 @@
#define X393_SENS_MODE__1 0x40001100 // Write sensor channel mode, data type: x393_sens_mode_t (wo)
// RESERVED: 0x1 DWORD
#define X393_SENSI2C_CTRL__1 0x40001108 // Control sensor i2c, write i2c LUT, data type: x393_i2c_ctltbl_t (wo)
#define X393_SENSI2C_STATUS__1 0x4000110c // Setup sensor i2c status report mode, data type: x393_status_ctrl_t (rw)
#define X393_SENSI2C_STATUS_CTRL__1 0x4000110c // Setup sensor i2c status report mode, data type: x393_status_ctrl_t (rw)
// RESERVED: 0x2 DWORDs
#define X393_SENS_SYNC_MULT__1 0x40001118 // Configure frames combining, data type: x393_sens_sync_mult_t (wo)
#define X393_SENS_SYNC_LATE__1 0x4000111c // Configure frame sync delay, data type: x393_sens_sync_late_t (wo)
......@@ -309,7 +309,7 @@
#define X393_SENS_MODE__2 0x40001200 // Write sensor channel mode, data type: x393_sens_mode_t (wo)
// RESERVED: 0x1 DWORD
#define X393_SENSI2C_CTRL__2 0x40001208 // Control sensor i2c, write i2c LUT, data type: x393_i2c_ctltbl_t (wo)
#define X393_SENSI2C_STATUS__2 0x4000120c // Setup sensor i2c status report mode, data type: x393_status_ctrl_t (rw)
#define X393_SENSI2C_STATUS_CTRL__2 0x4000120c // Setup sensor i2c status report mode, data type: x393_status_ctrl_t (rw)
// RESERVED: 0x2 DWORDs
#define X393_SENS_SYNC_MULT__2 0x40001218 // Configure frames combining, data type: x393_sens_sync_mult_t (wo)
#define X393_SENS_SYNC_LATE__2 0x4000121c // Configure frame sync delay, data type: x393_sens_sync_late_t (wo)
......@@ -372,7 +372,7 @@
#define X393_SENS_MODE__3 0x40001300 // Write sensor channel mode, data type: x393_sens_mode_t (wo)
// RESERVED: 0x1 DWORD
#define X393_SENSI2C_CTRL__3 0x40001308 // Control sensor i2c, write i2c LUT, data type: x393_i2c_ctltbl_t (wo)
#define X393_SENSI2C_STATUS__3 0x4000130c // Setup sensor i2c status report mode, data type: x393_status_ctrl_t (rw)
#define X393_SENSI2C_STATUS_CTRL__3 0x4000130c // Setup sensor i2c status report mode, data type: x393_status_ctrl_t (rw)
// RESERVED: 0x2 DWORDs
#define X393_SENS_SYNC_MULT__3 0x40001318 // Configure frames combining, data type: x393_sens_sync_mult_t (wo)
#define X393_SENS_SYNC_LATE__3 0x4000131c // Configure frame sync delay, data type: x393_sens_sync_late_t (wo)
......
py393/x393_export_c.py
View file @ a821207d
......@@ -145,7 +145,9 @@ class X393ExportC(object):
header = self.generated_fileHeader(filename,description)
ld= self.define_macros()
ld+=self.define_other_macros()
txt = ""
# Includes section
txt = '\n#include "elphel/types.h"\n'
txt +='//#include "elphel/x393_defs.h // alternative variant"\n\n'
for d in ld:
fd=self.expand_define_maxi0(d, mode = "func_decl",frmt_spcs = None)
if fd:
......@@ -161,7 +163,10 @@ class X393ExportC(object):
header = self.generated_fileHeader(filename,description)
ld= self.define_macros()
ld+=self.define_other_macros()
txt = ""
# Includes section
txt = '\n#include <linux/io.h>\n'
txt += '#include "x393.h"\n\n'
for d in ld:
fd=self.expand_define_maxi0(d, mode = "func_def",frmt_spcs = None)
if fd:
......@@ -754,7 +759,7 @@ class X393ExportC(object):
(('Write-only control of the sensor channels',)),
(("X393_SENS_MODE", c, vrlg.SENSOR_CTRL_RADDR + ba, ia, z3, "x393_sens_mode", "wo", "Write sensor channel mode")),
(("X393_SENSI2C_CTRL", c, vrlg.SENSI2C_CTRL_RADDR + vrlg.SENSI2C_CTRL + ba, ia, z3, "x393_i2c_ctltbl", "wo", "Control sensor i2c, write i2c LUT")),
(("X393_SENSI2C_STATUS", c, vrlg.SENSI2C_CTRL_RADDR + vrlg.SENSI2C_STATUS + ba, ia, z3, "x393_status_ctrl", "rw", "Setup sensor i2c status report mode")),
(("X393_SENSI2C_STATUS_CTRL", c, vrlg.SENSI2C_CTRL_RADDR + vrlg.SENSI2C_STATUS + ba, ia, z3, "x393_status_ctrl", "rw", "Setup sensor i2c status report mode")),
(("X393_SENS_SYNC_MULT", c, vrlg.SENS_SYNC_RADDR + vrlg.SENS_SYNC_MULT + ba, ia, z3, "x393_sens_sync_mult", "wo", "Configure frames combining")),
(("X393_SENS_SYNC_LATE", c, vrlg.SENS_SYNC_RADDR + vrlg.SENS_SYNC_LATE + ba, ia, z3, "x393_sens_sync_late", "wo", "Configure frame sync delay")),
(("X393_SENSIO_CTRL", c, vrlg.SENSIO_RADDR + vrlg.SENSIO_CTRL + ba, ia, z3, "x393_sensio_ctl", "wo", "Configure sensor I/O port")),
......@@ -1289,7 +1294,7 @@ class X393ExportC(object):
s+='return (%s) readl(0x%08x + 0x%x * %s)'%(data_type, address, address_inc, arg)
else:
s+='return (%s) readl(0x%08x)'%(data_type, address)
s+='};'
s+=';}'
else:
s += ';'
if comment:
......@@ -1339,7 +1344,7 @@ class X393ExportC(object):
s+='writel(0x%08x + 0x%x * %s, (u32) d)'%(address, address_inc, arg)
else:
s+='writel(0x%08x, (u32) d)'%(address)
s+='};'
s+=';}'
else:
s += ';'
if comment:
......@@ -1384,7 +1389,7 @@ class X393ExportC(object):
s+='writel(0x%08x + 0x%x * %s, 0)'%(address, address_inc, arg)
else:
s+='writel(0x%08x, 0)'%(address)
s+='};'
s+=';}'
else:
s += ';'
if comment:
......@@ -1435,17 +1440,17 @@ class X393ExportC(object):
name_len = len(name)
if address_inc:
if multivar:
name_len += 4 + len(var_name[0])
name_len += 2 + len(var_name[0])
for vn in var_name[1:]:
name_len += 3 + len(vn)
name_len += 1 + len(vn)
else:
name_len += 2 + len(var_name)
ins_spaces = max(0,frmt_spcs['macroNameLen'] - name_len)
if address_inc:
if multivar:
vname = "(%s)"%(var_name[0])
vname = "%s"%(var_name[0])
for vn in var_name[1:]:
vname +=",(%s)"%(vn)
vname +=",%s"%(vn)
s = "#define %s(%s) %s(0x%08x)"%(name, vname, ' ' * ins_spaces, address)
for vn, vi in zip(var_name, address_inc):
s += "+ 0x%x * (%s)"%(vi,vn)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment