Skip to content

X
x393
Commit a06aacce authored by Andrey Filippov's avatar Andrey Filippov
Browse files
Options

added x393_sata project

parent 3dddcdb1
Hide whitespace changes
Inline Side-by-side
Showing with 467 additions and 236 deletions
.gitignore
View file @ a06aacce
......@@ -15,7 +15,7 @@ x393.prj
*.pyc
*.pickle
py393/dbg*
debug
includes/x393_cur_params_sim.vh
includes/x393_cur_params_target_*.vh
py393/exp_gpio.py
......
.settings/com.elphel.vdt.VivadoSynthesis.prefs
View file @ a06aacce
......@@ -6,7 +6,7 @@ VivadoSynthesis_122_ConstraintsFiles=x393_hispi.xdc<-@\#\#@->x393_hispi_timing.x
VivadoSynthesis_122_SkipSnapshotSynth=true
VivadoSynthesis_123_ResetProject=true
VivadoSynthesis_123_SkipSnapshotSynth=true
VivadoSynthesis_124_ConstraintsFiles=x393_hispi.xdc<-@\#\#@->x393_hispi_timing.xdc<-@\#\#@->
VivadoSynthesis_124_ConstraintsFiles=x393_hispi.xdc<-@\#\#@->x393_hispi_timing.xdc<-@\#\#@->x393_sata/ahci_timing.xdc<-@\#\#@->
VivadoSynthesis_127_verbose=true
VivadoSynthesis_81_parser_mode=1
VivadoSynthesis_93_OtherProblems=Netlist 29-345<-@\#\#@->Board 49-26<-@\#\#@->Synth 8-638<-@\#\#@->Synth 8-256<-@\#\#@->
......
.settings/com.elphel.vdt.iverilog.prefs
View file @ a06aacce
......@@ -11,7 +11,7 @@ iverilog_104_ExtraFiles=glbl.v<-@\#\#@->
iverilog_104_IncludeDir=${verilog_project_loc}/ddr3<-@\#\#@->${verilog_project_loc}/includes<-@\#\#@->
iverilog_105_ExtraFiles=glbl.v<-@\#\#@->
iverilog_105_IncludeDir=${verilog_project_loc}/includes<-@\#\#@->${verilog_project_loc}/ddr3<-@\#\#@->
iverilog_106_IncludeDir=${verilog_project_loc}_sata/x393/includes<-@\#\#@->${verilog_project_loc}_sata/x393/ddr3<-@\#\#@->
iverilog_106_IncludeDir=${verilog_project_loc}/x393/includes<-@\#\#@->${verilog_project_loc}/x393/ddr3<-@\#\#@->${verilog_project_loc}/x393_sata/includes<-@\#\#@->
iverilog_109_ShowNoProblem=true
iverilog_110_ShowNoProblem=true
iverilog_110_ShowWarnings=false
......
compressor_jp/compressor393.v
View file @ a06aacce
......@@ -226,6 +226,7 @@ module compressor393 # (
output afi0_wrissuecap1en,
// write address, second channel
output afi1_clk, // same as hclk if the second channel is used
output [31:0] afi1_awaddr,
output afi1_awvalid,
input afi1_awready, // @SuppressThisWarning VEditor unused - used FIF0 level
......@@ -638,6 +639,7 @@ module compressor393 # (
.debug_di (debug_ring[DEBUG_RING_LENGTH]) // input
`endif
);
assign afi1_clk = hclk;
end else begin
cmprs_afi_mux #(
.CMPRS_AFIMUX_ADDR (CMPRS_GROUP_ADDR + CMPRS_AFIMUX_RADDR0),
......@@ -723,6 +725,7 @@ module compressor393 # (
.debug_di (debug_ring[5]) // input
`endif
);
assign afi1_clk = hclk;
assign afi1_awaddr = 0;
assign afi1_awvalid = 0;
assign afi1_awid = 0;
......
system_defines.vh
View file @ a06aacce
......@@ -34,6 +34,17 @@
// This file may be used to define same pre-processor macros to be included into each parsed file
`ifndef SYSTEM_DEFINES
`define SYSTEM_DEFINES
// Parameters from x393_sata project
`define USE_DRP
`define ALIGN_CLOCKS
// `define STRAIGHT_XCLK
`define USE_DATASCOPE
// `define DATASCOPE_INCOMING_RAW
`define PRELOAD_BRAMS
// `define AHCI_SATA 1
// `define DEBUG_ELASTIC
// End of parameters from x393_sata project
`define PRELOAD_BRAMS
`define DISPLAY_COMPRESSED_DATA
// if HISPI is not defined, parallel sensor interface is used for all channels
......
x393.v
View file @ a06aacce
......@@ -146,7 +146,16 @@ module x393 #(
input ffclk0p, // Y12
input ffclk0n, // Y11
input ffclk1p, // W14
input ffclk1n // W13
input ffclk1n, // W13
// SATA data interface
input RXN,
input RXP,
output TXN,
output TXP,
// sata clocking iface
input EXTCLK_P,
input EXTCLK_N
);
`include "fpga_version.vh"
......@@ -513,54 +522,136 @@ module x393 #(
wire [3:0] cmprs_suspend; // output suspend reading data for this channel - waiting for the source data
// Timestamp messages (@mclk) - combine to a single ts_data?
wire [3:0] ts_pre_stb; // input[ 3:0] 4 compressor channels
wire [31:0] ts_data; // input[31:0] 4 compressor channels
wire [3:0] ts_pre_stb; // input[ 3:0] 4 compressor channels
wire [31:0] ts_data; // input[31:0] 4 compressor channels
// Timestamp messages (@mclk) - combine to a single ts_data?
wire ts_pre_logger_stb; // input logger timestamp sync (@logger_clk)
wire [7:0] ts_logegr_data; // input[7:0] loger timestamp data (@logger_clk)
wire ts_pre_logger_stb; // input logger timestamp sync (@logger_clk)
wire [7:0] ts_logegr_data; // input[7:0] loger timestamp data (@logger_clk)
// Compressor signals for interrupts generation
wire [3:0] eof_written_mclk; // output // SuppressThisWarning VEditor - (yet) unused
wire [3:0] stuffer_done_mclk; // output// SuppressThisWarning VEditor - (yet) unused
wire [3:0] eof_written_mclk; // output // SuppressThisWarning VEditor - (yet) unused
wire [3:0] stuffer_done_mclk; // output// SuppressThisWarning VEditor - (yet) unused
wire [3:0] cmprs_irq; // compressor done, data confirmed written to memory)
wire [3:0] cmprs_irq; // compressor done, data confirmed written to memory)
// Compressor frame synchronization
// GPIO internal signals (for camera GPIOs, not Zynq PS GPIO)
wire [GPIO_N-1:0] gpio_rd; // data read from the external GPIO pins
wire [GPIO_N-1:0] gpio_camsync; // data out from the camsync module
wire [GPIO_N-1:0] gpio_camsync_en; // output enable from the camsync module
wire [GPIO_N-1:0] gpio_db; // data out from the port B (unused, Motors in x353)
wire [GPIO_N-1:0] gpio_db_en; // output enable from the port B (unused, Motors in x353)
wire [GPIO_N-1:0] gpio_logger; // data out from the event_logger module
wire [GPIO_N-1:0] gpio_logger_en; // output enable from the event_logger module
assign gpio_db = 0; // unused, Motors in x353
assign gpio_db_en = 0; // unused, Motors in x353
wire [GPIO_N-1:0] gpio_rd; // data read from the external GPIO pins
wire [GPIO_N-1:0] gpio_camsync; // data out from the camsync module
wire [GPIO_N-1:0] gpio_camsync_en; // output enable from the camsync module
wire [GPIO_N-1:0] gpio_db; // data out from the port B (unused, Motors in x353)
wire [GPIO_N-1:0] gpio_db_en; // output enable from the port B (unused, Motors in x353)
wire [GPIO_N-1:0] gpio_logger; // data out from the event_logger module
wire [GPIO_N-1:0] gpio_logger_en; // output enable from the event_logger module
assign gpio_in= {48'h0,frst,tmp_debug}; // these are PS GPIO pins
// Internal signal for toming393 (camsync) modules
wire logger_snap;
wire logger_snap;
// event_logger intermediate signals
wire [15:0] logger_out; // output[15:0]
wire logger_stb; // output
wire [15:0] logger_out; // output[15:0]
wire logger_stb; // output
// event_logger intermediate signals (after mult_saxi_wr_inbuf - converted to 32 bit wide)
wire logger_saxi_en;
wire logger_has_burst;
wire logger_read_burst;
wire [31:0] logger_data32;
wire logger_pre_valid_chn;
wire idelay_ctrl_rdy;// just to keep idelay_ctrl instances
wire logger_saxi_en;
wire logger_has_burst;
wire logger_read_burst;
wire [31:0] logger_data32;
wire logger_pre_valid_chn;
wire idelay_ctrl_rdy;// just to keep idelay_ctrl instances
// Top level signals for SATA
// MAXIGP1 - interface with SATA controller register memory
wire [31:0] maxi1_araddr;
wire maxi1_arvalid;
wire maxi1_arready;
wire [11:0] maxi1_arid;
wire [3:0] maxi1_arlen;
wire [1:0] maxi1_arsize;
wire [1:0] maxi1_arburst;
wire [31:0] maxi1_rdata;
wire maxi1_rvalid;
wire maxi1_rready;
wire [11:0] maxi1_rid;
wire maxi1_rlast;
wire [1:0] maxi1_rresp;
wire [31:0] maxi1_awaddr;
wire maxi1_awvalid;
wire maxi1_awready;
wire [11:0] maxi1_awid;
wire [3:0] maxi1_awlen;
wire [1:0] maxi1_awsize;
wire [1:0] maxi1_awburst;
wire [31:0] maxi1_wdata;
wire maxi1_wvalid;
wire maxi1_wready;
wire [11:0] maxi1_wid;
wire maxi1_wlast;
wire [3:0] maxi1_wstb;
wire maxi1_bvalid;
wire maxi1_bready;
wire [11:0] maxi1_bid;
wire [1:0] maxi1_bresp;
// SAXIGP3 - SATA comntroller DMA interface with system memory
wire [31:0] afi3_awaddr; // output[31:0]
wire afi3_awvalid; // output
wire afi3_awready; // input
wire [ 5:0] afi3_awid; // output[5:0]
wire [ 1:0] afi3_awlock; // output[1:0]
wire [ 3:0] afi3_awcache; // output[3:0]
wire [ 2:0] afi3_awprot; // output[2:0]
wire [ 3:0] afi3_awlen; // output[3:0]
wire [ 1:0] afi3_awsize; // output[2:0]
wire [ 1:0] afi3_awburst; // output[1:0]
wire [ 3:0] afi3_awqos; // output[3:0]
wire [63:0] afi3_wdata; // output[63:0]
wire afi3_wvalid; // output
wire afi3_wready; // input
wire [ 5:0] afi3_wid; // output[5:0]
wire afi3_wlast; // output
wire [ 7:0] afi3_wstrb; // output[7:0]
wire afi3_bvalid; // input
wire afi3_bready; // output
wire [ 5:0] afi3_bid; // input[5:0]
wire [ 1:0] afi3_bresp; // input[1:0]
wire [ 7:0] afi3_wcount; // input[7:0]
wire [ 5:0] afi3_wacount; // input[5:0]
wire afi3_wrissuecap1en;// output
wire [31:0] afi3_araddr; // output[31:0]
wire afi3_arvalid; // output
wire afi3_arready; // input
wire [ 5:0] afi3_arid; // output[5:0]
wire [ 1:0] afi3_arlock; // output[1:0]
wire [ 3:0] afi3_arcache; // output[3:0]
wire [ 2:0] afi3_arprot; // output[2:0]
wire [ 3:0] afi3_arlen; // output[3:0]
wire [ 1:0] afi3_arsize; // output[2:0]
wire [ 1:0] afi3_arburst; // output[1:0]
wire [ 3:0] afi3_arqos; // output[3:0]
wire [63:0] afi3_rdata; // input[63:0]
wire afi3_rvalid; // input
wire afi3_rready; // output
wire [ 5:0] afi3_rid; // input[5:0]
wire afi3_rlast; // input
wire [ 1:0] afi3_rresp; // input[2:0]
wire [ 7:0] afi3_rcount; // input[7:0]
wire [ 2:0] afi3_racount; // input[2:0]
wire afi3_rdissuecap1en;// output
wire sata_irq; // ps7 IRQ
wire sata_clk ; // Just output from SATA subsystem SuppressThisWarning VEditor Not used
assign gpio_db = 0; // unused, Motors in x353
assign gpio_db_en = 0; // unused, Motors in x353
assign gpio_in= {48'h0,frst,tmp_debug}; // these are PS GPIO pins
assign axird_dev_ready = ~axird_dev_busy; //may combine (AND) multiple sources if needed
assign axird_dev_busy = 1'b0; // always for now
assign axird_dev_ready = ~axird_dev_busy; //may combine (AND) multiple sources if needed
assign axird_dev_busy = 1'b0; // always for now
// Use this later
assign axird_rdata= ({32{status_selected_regen}} & status_rdata[31:0]) |
assign axird_rdata= ({32{status_selected_regen}} & status_rdata[31:0]) |
({32{readback_selected_regen}} & readback_rdata[31:0]) |
({32{mcntrl_axird_selected_regen}} & mcntrl_axird_rdata[31:0]);
......@@ -1793,7 +1884,8 @@ assign axi_grst = axi_rst_pre;
wire [ 7:0] afi1_wcount; // input[7:0]
wire [ 5:0] afi1_wacount; // input[5:0]
wire afi1_wrissuecap1en; // output
wire afi1_clk; // same as hclk if the second compressor AXI HP channel is enabled, 1'b0 otherwise
// AFI2 (AXI_HP2) signals - write channels only - used only if CMPRS_NUM_AFI_CHN == 2
wire [31:0] afi2_awaddr; // output[31:0]
wire afi2_awvalid; // output
......@@ -1974,6 +2066,7 @@ assign axi_grst = axi_rst_pre;
.afi0_wcount (afi1_wcount), // input[7:0]
.afi0_wacount (afi1_wacount), // input[5:0]
.afi0_wrissuecap1en (afi1_wrissuecap1en), // output
.afi1_clk (afi1_clk), // output same as hclk if the second channel is used
.afi1_awaddr (afi2_awaddr), // output[31:0]
.afi1_awvalid (afi2_awvalid), // output
......@@ -2454,6 +2547,115 @@ assign axi_grst = axi_rst_pre;
.bram_rdata (axird_rdata ) // input[31:0] == axi_rdata[31:0], so SuppressThisWarning VivadoSynthesis: [Synth 8-3295] tying undriven pin #axibram_read_i:bram_rdata[31:0] to constant 0
);
sata_ahci_top sata_top(
.sata_clk (sata_clk), // output wire
.sata_rst (), // output wire
.arst (hrst), // extrst), // input wire
// reliable clock to source drp and cpll lock det circuits
.reliable_clk (hclk), // input wire// Use 150MHz hclk for MAXIGP1 axi_aclk0),
.hclk (hclk), // input wire
.ACLK (hclk), // input wire// Use 150MHz hclk for MAXIGP1 axi_aclk0),
.ARESETN (1'b0), // input wire not used inside module
// AXI PS Master GP1: Read Address
.ARADDR (maxi1_araddr),
.ARVALID (maxi1_arvalid),
.ARREADY (maxi1_arready),
.ARID (maxi1_arid),
.ARLEN (maxi1_arlen),
.ARSIZE (maxi1_arsize),
.ARBURST (maxi1_arburst),
// AXI PS Master GP1: Read Data
.RDATA (maxi1_rdata),
.RVALID (maxi1_rvalid),
.RREADY (maxi1_rready),
.RID (maxi1_rid),
.RLAST (maxi1_rlast),
.RRESP (maxi1_rresp),
// AXI PS Master GP1: Write Address
.AWADDR (maxi1_awaddr),
.AWVALID (maxi1_awvalid),
.AWREADY (maxi1_awready),
.AWID (maxi1_awid),
.AWLEN (maxi1_awlen),
.AWSIZE (maxi1_awsize),
.AWBURST (maxi1_awburst),
// AXI PS Master GP1: Write Data
.WDATA (maxi1_wdata),
.WVALID (maxi1_wvalid),
.WREADY (maxi1_wready),
.WID (maxi1_wid),
.WLAST (maxi1_wlast),
.WSTRB (maxi1_wstb),
// AXI PS Master GP1: Write response
.BVALID (maxi1_bvalid),
.BREADY (maxi1_bready),
.BID (maxi1_bid),
.BRESP (maxi1_bresp),
// Data interface
.afi_awaddr (afi3_awaddr),
.afi_awvalid (afi3_awvalid),
.afi_awready (afi3_awready),
.afi_awid (afi3_awid),
.afi_awlock (afi3_awlock),
.afi_awcache (afi3_awcache),
.afi_awprot (afi3_awprot),
.afi_awlen (afi3_awlen),
.afi_awsize (afi3_awsize),
.afi_awburst (afi3_awburst),
.afi_awqos (afi3_awqos),
// write data
.afi_wdata (afi3_wdata),
.afi_wvalid (afi3_wvalid),
.afi_wready (afi3_wready),
.afi_wid (afi3_wid),
.afi_wlast (afi3_wlast),
.afi_wstrb (afi3_wstrb),
// write response
.afi_bvalid (afi3_bvalid),
.afi_bready (afi3_bready),
.afi_bid (afi3_bid),
.afi_bresp (afi3_bresp),
// PL extra (non-AXI) signal
.afi_wcount (afi3_wcount),
.afi_wacount (afi3_wacount),
.afi_wrissuecap1en (afi3_wrissuecap1en),
// AXI_HP signals - read channel
// read address
.afi_araddr (afi3_araddr),
.afi_arvalid (afi3_arvalid),
.afi_arready (afi3_arready),
.afi_arid (afi3_arid),
.afi_arlock (afi3_arlock),
.afi_arcache (afi3_arcache),
.afi_arprot (afi3_arprot),
.afi_arlen (afi3_arlen),
.afi_arsize (afi3_arsize),
.afi_arburst (afi3_arburst),
.afi_arqos (afi3_arqos),
// read data
.afi_rdata (afi3_rdata),
.afi_rvalid (afi3_rvalid),
.afi_rready (afi3_rready),
.afi_rid (afi3_rid),
.afi_rlast (afi3_rlast),
.afi_rresp (afi3_rresp),
// PL extra (non-AXI) signal
.afi_rcount (afi3_rcount),
.afi_racount (afi3_racount),
.afi_rdissuecap1en (afi3_rdissuecap1en),
.irq (sata_irq), // output wire
// PHY
.TXN (TXN),
.TXP (TXP),
.RXN (RXN),
.RXP (RXP),
.EXTCLK_P (EXTCLK_P),
.EXTCLK_N (EXTCLK_N)
);
PS7 ps7_i (
// EMIO interface
// CAN interface
......@@ -2685,7 +2887,7 @@ assign axi_grst = axi_rst_pre;
cmprs_irq[3:0], // [15:12] Compressor done interrupts
frseq_irq[3:0], // [11: 8] Frame sync interrupts
7'b0,
1'b0 // Put SATA here
sata_irq // Put AHCI (SATA ) interrupt
}), // Interrupts, OL to PS [19:0], input
.IRQP2F(), // Interrupts, OL to PS [28:0], output
// Event Signals
......@@ -2750,143 +2952,143 @@ assign axi_grst = axi_rst_pre;
.MAXIGP0AWID (maxi0_awid[11:0]), // AXI PS Master GP0 AWID[11:0], output
.MAXIGP0AWLOCK (), // AXI PS Master GP0 AWLOCK[1:0], output
.MAXIGP0AWCACHE (),// AXI PS Master GP0 AWCACHE[3:0], output
.MAXIGP0AWPROT (), // AXI PS Master GP0 AWPROT[2:0], output
.MAXIGP0AWLEN (maxi0_awlen[3:0]), // AXI PS Master GP0 AWLEN[3:0], output
.MAXIGP0AWPROT (), // AXI PS Master GP0 AWPROT[2:0], output
.MAXIGP0AWLEN (maxi0_awlen[3:0]), // AXI PS Master GP0 AWLEN[3:0], output
.MAXIGP0AWSIZE (maxi0_awsize[1:0]), // AXI PS Master GP0 AWSIZE[1:0], output
.MAXIGP0AWBURST (maxi0_awburst[1:0]),// AXI PS Master GP0 AWBURST[1:0], output
.MAXIGP0AWQOS (), // AXI PS Master GP0 AWQOS[3:0], output
.MAXIGP0AWBURST (maxi0_awburst[1:0]), // AXI PS Master GP0 AWBURST[1:0], output
.MAXIGP0AWQOS (), // AXI PS Master GP0 AWQOS[3:0], output
// AXI PS Master GP0: Write Data
.MAXIGP0WDATA (maxi0_wdata[31:0]), // AXI PS Master GP0 WDATA[31:0], output
.MAXIGP0WDATA (maxi0_wdata[31:0]), // AXI PS Master GP0 WDATA[31:0], output
.MAXIGP0WVALID (maxi0_wvalid), // AXI PS Master GP0 WVALID, output
.MAXIGP0WREADY (maxi0_wready), // AXI PS Master GP0 WREADY, input
.MAXIGP0WID (maxi0_wid[11:0]), // AXI PS Master GP0 WID[11:0], output
.MAXIGP0WLAST (maxi0_wlast), // AXI PS Master GP0 WLAST, output
.MAXIGP0WID (maxi0_wid[11:0]), // AXI PS Master GP0 WID[11:0], output
.MAXIGP0WLAST (maxi0_wlast), // AXI PS Master GP0 WLAST, output
.MAXIGP0WSTRB (maxi0_wstb[3:0]), // AXI PS Master GP0 WSTRB[3:0], output
// AXI PS Master GP0: Write response
.MAXIGP0BVALID (maxi0_bvalid), // AXI PS Master GP0 BVALID, input
.MAXIGP0BREADY (maxi0_bready), // AXI PS Master GP0 BREADY, output
.MAXIGP0BID (maxi0_bid[11:0]), // AXI PS Master GP0 BID[11:0], input
.MAXIGP0BRESP (maxi0_bresp[1:0]), // AXI PS Master GP0 BRESP[1:0], input
.MAXIGP0BID (maxi0_bid[11:0]), // AXI PS Master GP0 BID[11:0], input
.MAXIGP0BRESP (maxi0_bresp[1:0]), // AXI PS Master GP0 BRESP[1:0], input
// AXI PS Master GP1
// AXI PS Master GP1: Clock, Reset
.MAXIGP1ACLK(), // AXI PS Master GP1 Clock , input
.MAXIGP1ARESETN(), // AXI PS Master GP1 Reset, output
.MAXIGP1ACLK (hclk), // AXI PS Master GP1 Clock , input
.MAXIGP1ARESETN(), // AXI PS Master GP1 Reset, output
// AXI PS Master GP1: Read Address
.MAXIGP1ARADDR(), // AXI PS Master GP1 ARADDR[31:0], output
.MAXIGP1ARVALID(), // AXI PS Master GP1 ARVALID, output
.MAXIGP1ARREADY(), // AXI PS Master GP1 ARREADY, input
.MAXIGP1ARID(), // AXI PS Master GP1 ARID[11:0], output
.MAXIGP1ARLOCK(), // AXI PS Master GP1 ARLOCK[1:0], output
.MAXIGP1ARCACHE(), // AXI PS Master GP1 ARCACHE[3:0], output
.MAXIGP1ARPROT(), // AXI PS Master GP1 ARPROT[2:0], output
.MAXIGP1ARLEN(), // AXI PS Master GP1 ARLEN[3:0], output
.MAXIGP1ARSIZE(), // AXI PS Master GP1 ARSIZE[1:0], output
.MAXIGP1ARBURST(), // AXI PS Master GP1 ARBURST[1:0], output
.MAXIGP1ARQOS(), // AXI PS Master GP1 ARQOS[3:0], output
.MAXIGP1ARADDR (maxi1_araddr), // AXI PS Master GP1 ARADDR[31:0], output
.MAXIGP1ARVALID (maxi1_arvalid), // AXI PS Master GP1 ARVALID, output
.MAXIGP1ARREADY (maxi1_arready), // AXI PS Master GP1 ARREADY, input
.MAXIGP1ARID (maxi1_arid), // AXI PS Master GP1 ARID[11:0], output
.MAXIGP1ARLOCK (), // AXI PS Master GP1 ARLOCK[1:0], output
.MAXIGP1ARCACHE (), // AXI PS Master GP1 ARCACHE[3:0], output
.MAXIGP1ARPROT (), // AXI PS Master GP1 ARPROT[2:0], output
.MAXIGP1ARLEN (maxi1_arlen), // AXI PS Master GP1 ARLEN[3:0], output
.MAXIGP1ARSIZE (maxi1_arsize), // AXI PS Master GP1 ARSIZE[1:0], output
.MAXIGP1ARBURST (maxi1_arburst), // AXI PS Master GP1 ARBURST[1:0], output
.MAXIGP1ARQOS (), // AXI PS Master GP1 ARQOS[3:0], output
// AXI PS Master GP1: Read Data
.MAXIGP1RDATA(), // AXI PS Master GP1 RDATA[31:0], input
.MAXIGP1RVALID(), // AXI PS Master GP1 RVALID, input
.MAXIGP1RREADY(), // AXI PS Master GP1 RREADY, output
.MAXIGP1RID(), // AXI PS Master GP1 RID[11:0], input
.MAXIGP1RLAST(), // AXI PS Master GP1 RLAST, input
.MAXIGP1RRESP(), // AXI PS Master GP1 RRESP[1:0], input
.MAXIGP1RDATA (maxi1_rdata), // AXI PS Master GP1 RDATA[31:0], input
.MAXIGP1RVALID (maxi1_rvalid), // AXI PS Master GP1 RVALID, input
.MAXIGP1RREADY (maxi1_rready), // AXI PS Master GP1 RREADY, output
.MAXIGP1RID (maxi1_rid), // AXI PS Master GP1 RID[11:0], input
.MAXIGP1RLAST (maxi1_rlast), // AXI PS Master GP1 RLAST, input
.MAXIGP1RRESP (maxi1_rresp), // AXI PS Master GP1 RRESP[1:0], input
// AXI PS Master GP1: Write Address
.MAXIGP1AWADDR(), // AXI PS Master GP1 AWADDR[31:0], output
.MAXIGP1AWVALID(), // AXI PS Master GP1 AWVALID, output
.MAXIGP1AWREADY(), // AXI PS Master GP1 AWREADY, input
.MAXIGP1AWID(), // AXI PS Master GP1 AWID[11:0], output
.MAXIGP1AWLOCK(), // AXI PS Master GP1 AWLOCK[1:0], output
.MAXIGP1AWCACHE(), // AXI PS Master GP1 AWCACHE[3:0], output
.MAXIGP1AWPROT(), // AXI PS Master GP1 AWPROT[2:0], output
.MAXIGP1AWLEN(), // AXI PS Master GP1 AWLEN[3:0], output
.MAXIGP1AWSIZE(), // AXI PS Master GP1 AWSIZE[1:0], output
.MAXIGP1AWBURST(), // AXI PS Master GP1 AWBURST[1:0], output
.MAXIGP1AWQOS(), // AXI PS Master GP1 AWQOS[3:0], output
.MAXIGP1AWADDR (maxi1_awaddr), // AXI PS Master GP1 AWADDR[31:0], output
.MAXIGP1AWVALID (maxi1_awvalid), // AXI PS Master GP1 AWVALID, output
.MAXIGP1AWREADY (maxi1_awready), // AXI PS Master GP1 AWREADY, input
.MAXIGP1AWID (maxi1_awid), // AXI PS Master GP1 AWID[11:0], output
.MAXIGP1AWLOCK (), // AXI PS Master GP1 AWLOCK[1:0], output
.MAXIGP1AWCACHE (), // AXI PS Master GP1 AWCACHE[3:0], output
.MAXIGP1AWPROT (), // AXI PS Master GP1 AWPROT[2:0], output
.MAXIGP1AWLEN (maxi1_awlen), // AXI PS Master GP1 AWLEN[3:0], output
.MAXIGP1AWSIZE (maxi1_awsize), // AXI PS Master GP1 AWSIZE[1:0], output
.MAXIGP1AWBURST (maxi1_awburst), // AXI PS Master GP1 AWBURST[1:0], output
.MAXIGP1AWQOS (), // AXI PS Master GP1 AWQOS[3:0], output
// AXI PS Master GP1: Write Data
.MAXIGP1WDATA(), // AXI PS Master GP1 WDATA[31:0], output
.MAXIGP1WVALID(), // AXI PS Master GP1 WVALID, output
.MAXIGP1WREADY(), // AXI PS Master GP1 WREADY, input
.MAXIGP1WID(), // AXI PS Master GP1 WID[11:0], output
.MAXIGP1WLAST(), // AXI PS Master GP1 WLAST, output
.MAXIGP1WSTRB(), // AXI PS Master GP1 WSTRB[3:0], output
.MAXIGP1WDATA (maxi1_wdata), // AXI PS Master GP1 WDATA[31:0], output
.MAXIGP1WVALID (maxi1_wvalid), // AXI PS Master GP1 WVALID, output
.MAXIGP1WREADY (maxi1_wready), // AXI PS Master GP1 WREADY, input
.MAXIGP1WID (maxi1_wid), // AXI PS Master GP1 WID[11:0], output
.MAXIGP1WLAST (maxi1_wlast), // AXI PS Master GP1 WLAST, output
.MAXIGP1WSTRB (maxi1_wstb), // AXI PS Master GP1 maxi1_wstb[3:0], output
// AXI PS Master GP1: Write response
.MAXIGP1BVALID(), // AXI PS Master GP1 BVALID, input
.MAXIGP1BREADY(), // AXI PS Master GP1 BREADY, output
.MAXIGP1BID(), // AXI PS Master GP1 BID[11:0], input
.MAXIGP1BRESP(), // AXI PS Master GP1 BRESP[1:0], input
.MAXIGP1BVALID (maxi1_bvalid), // AXI PS Master GP1 BVALID, input
.MAXIGP1BREADY (maxi1_bready), // AXI PS Master GP1 BREADY, output
.MAXIGP1BID (maxi1_bid), // AXI PS Master GP1 BID[11:0], input
.MAXIGP1BRESP (maxi1_bresp), // AXI PS Master GP1 BRESP[1:0], input
// AXI PS Slave GP0
// AXI PS Slave GP0: Clock, Reset
.SAXIGP0ACLK (saxi0_aclk), // AXI PS Slave GP0 Clock , input
.SAXIGP0ARESETN(), // AXI PS Slave GP0 Reset, output
.SAXIGP0ACLK (saxi0_aclk), // AXI PS Slave GP0 Clock , input
.SAXIGP0ARESETN(), // AXI PS Slave GP0 Reset, output
// AXI PS Slave GP0: Read Address - Not used
.SAXIGP0ARADDR(), // AXI PS Slave GP0 ARADDR[31:0], input
.SAXIGP0ARVALID(), // AXI PS Slave GP0 ARVALID, input
.SAXIGP0ARREADY(), // AXI PS Slave GP0 ARREADY, output
.SAXIGP0ARID(), // AXI PS Slave GP0 ARID[5:0], input
.SAXIGP0ARLOCK(), // AXI PS Slave GP0 ARLOCK[1:0], input
.SAXIGP0ARCACHE(), // AXI PS Slave GP0 ARCACHE[3:0], input
.SAXIGP0ARPROT(), // AXI PS Slave GP0 ARPROT[2:0], input
.SAXIGP0ARLEN(), // AXI PS Slave GP0 ARLEN[3:0], input
.SAXIGP0ARSIZE(), // AXI PS Slave GP0 ARSIZE[1:0], input
.SAXIGP0ARBURST(), // AXI PS Slave GP0 ARBURST[1:0], input
.SAXIGP0ARQOS(), // AXI PS Slave GP0 ARQOS[3:0], input
.SAXIGP0ARADDR(), // AXI PS Slave GP0 ARADDR[31:0], input
.SAXIGP0ARVALID(), // AXI PS Slave GP0 ARVALID, input
.SAXIGP0ARREADY(), // AXI PS Slave GP0 ARREADY, output
.SAXIGP0ARID(), // AXI PS Slave GP0 ARID[5:0], input
.SAXIGP0ARLOCK(), // AXI PS Slave GP0 ARLOCK[1:0], input
.SAXIGP0ARCACHE(), // AXI PS Slave GP0 ARCACHE[3:0], input
.SAXIGP0ARPROT(), // AXI PS Slave GP0 ARPROT[2:0], input
.SAXIGP0ARLEN(), // AXI PS Slave GP0 ARLEN[3:0], input
.SAXIGP0ARSIZE(), // AXI PS Slave GP0 ARSIZE[1:0], input
.SAXIGP0ARBURST(), // AXI PS Slave GP0 ARBURST[1:0], input
.SAXIGP0ARQOS(), // AXI PS Slave GP0 ARQOS[3:0], input
// AXI PS Slave GP0: Read Data - Not used
.SAXIGP0RDATA(), // AXI PS Slave GP0 RDATA[31:0], output
.SAXIGP0RVALID(), // AXI PS Slave GP0 RVALID, output
.SAXIGP0RREADY(), // AXI PS Slave GP0 RREADY, input
.SAXIGP0RID(), // AXI PS Slave GP0 RID[5:0], output
.SAXIGP0RLAST(), // AXI PS Slave GP0 RLAST, output
.SAXIGP0RRESP(), // AXI PS Slave GP0 RRESP[1:0], output
.SAXIGP0RDATA(), // AXI PS Slave GP0 RDATA[31:0], output
.SAXIGP0RVALID(), // AXI PS Slave GP0 RVALID, output
.SAXIGP0RREADY(), // AXI PS Slave GP0 RREADY, input
.SAXIGP0RID(), // AXI PS Slave GP0 RID[5:0], output
.SAXIGP0RLAST(), // AXI PS Slave GP0 RLAST, output
.SAXIGP0RRESP(), // AXI PS Slave GP0 RRESP[1:0], output
// AXI PS Slave GP0: Write Address
.SAXIGP0AWADDR (saxi0_awaddr), // AXI PS Slave GP0 AWADDR[31:0], input
.SAXIGP0AWVALID (saxi0_awvalid), // AXI PS Slave GP0 AWVALID, input
.SAXIGP0AWREADY (saxi0_awready), // AXI PS Slave GP0 AWREADY, output
.SAXIGP0AWID (saxi0_awid), // AXI PS Slave GP0 AWID[5:0], input
.SAXIGP0AWLOCK (saxi0_awlock), // AXI PS Slave GP0 AWLOCK[1:0], input
.SAXIGP0AWCACHE (saxi0_awcache), // AXI PS Slave GP0 AWCACHE[3:0], input
.SAXIGP0AWPROT (saxi0_awprot), // AXI PS Slave GP0 AWPROT[2:0], input
.SAXIGP0AWLEN (saxi0_awlen), // AXI PS Slave GP0 AWLEN[3:0], input
.SAXIGP0AWSIZE (saxi0_awsize), // AXI PS Slave GP0 AWSIZE[1:0], input
.SAXIGP0AWBURST (saxi0_awburst), // AXI PS Slave GP0 AWBURST[1:0], input
.SAXIGP0AWQOS (saxi0_awqos), // AXI PS Slave GP0 AWQOS[3:0], input
.SAXIGP0AWADDR (saxi0_awaddr), // AXI PS Slave GP0 AWADDR[31:0], input
.SAXIGP0AWVALID (saxi0_awvalid), // AXI PS Slave GP0 AWVALID, input
.SAXIGP0AWREADY (saxi0_awready), // AXI PS Slave GP0 AWREADY, output
.SAXIGP0AWID (saxi0_awid), // AXI PS Slave GP0 AWID[5:0], input
.SAXIGP0AWLOCK (saxi0_awlock), // AXI PS Slave GP0 AWLOCK[1:0], input
.SAXIGP0AWCACHE (saxi0_awcache), // AXI PS Slave GP0 AWCACHE[3:0], input
.SAXIGP0AWPROT (saxi0_awprot), // AXI PS Slave GP0 AWPROT[2:0], input
.SAXIGP0AWLEN (saxi0_awlen), // AXI PS Slave GP0 AWLEN[3:0], input
.SAXIGP0AWSIZE (saxi0_awsize), // AXI PS Slave GP0 AWSIZE[1:0], input
.SAXIGP0AWBURST (saxi0_awburst), // AXI PS Slave GP0 AWBURST[1:0], input
.SAXIGP0AWQOS (saxi0_awqos), // AXI PS Slave GP0 AWQOS[3:0], input
// AXI PS Slave GP0: Write Data
.SAXIGP0WDATA (saxi0_wdata), // AXI PS Slave GP0 WDATA[31:0], input
.SAXIGP0WVALID (saxi0_wvalid), // AXI PS Slave GP0 WVALID, input
.SAXIGP0WREADY (saxi0_wready), // AXI PS Slave GP0 WREADY, output
.SAXIGP0WID (saxi0_wid), // AXI PS Slave GP0 WID[5:0], input
.SAXIGP0WLAST (saxi0_wlast), // AXI PS Slave GP0 WLAST, input
.SAXIGP0WSTRB (saxi0_wstrb), // AXI PS Slave GP0 WSTRB[3:0], input
.SAXIGP0WDATA (saxi0_wdata), // AXI PS Slave GP0 WDATA[31:0], input
.SAXIGP0WVALID (saxi0_wvalid), // AXI PS Slave GP0 WVALID, input
.SAXIGP0WREADY (saxi0_wready), // AXI PS Slave GP0 WREADY, output
.SAXIGP0WID (saxi0_wid), // AXI PS Slave GP0 WID[5:0], input
.SAXIGP0WLAST (saxi0_wlast), // AXI PS Slave GP0 WLAST, input
.SAXIGP0WSTRB (saxi0_wstrb), // AXI PS Slave GP0 WSTRB[3:0], input
// AXI PS Slave GP0: Write response
.SAXIGP0BVALID (saxi0_bvalid), // AXI PS Slave GP0 BVALID, output
.SAXIGP0BREADY (saxi0_bready), // AXI PS Slave GP0 BREADY, input
.SAXIGP0BID (saxi0_bid), // AXI PS Slave GP0 BID[5:0], output //TODO: Update range !!!
.SAXIGP0BRESP (saxi0_bresp), // AXI PS Slave GP0 BRESP[1:0], output
.SAXIGP0BVALID (saxi0_bvalid), // AXI PS Slave GP0 BVALID, output
.SAXIGP0BREADY (saxi0_bready), // AXI PS Slave GP0 BREADY, input
.SAXIGP0BID (saxi0_bid), // AXI PS Slave GP0 BID[5:0], output //TODO: Update range !!!
.SAXIGP0BRESP (saxi0_bresp), // AXI PS Slave GP0 BRESP[1:0], output
// AXI PS Slave GP1
// AXI PS Slave GP1: Clock, Reset
.SAXIGP1ACLK (saxi1_aclk), // AXI PS Slave GP1 Clock , input
.SAXIGP1ARESETN(), // AXI PS Slave GP1 Reset, output
.SAXIGP1ACLK (saxi1_aclk), // AXI PS Slave GP1 Clock , input
.SAXIGP1ARESETN(), // AXI PS Slave GP1 Reset, output
// AXI PS Slave GP1: Read Address
.SAXIGP1ARADDR(), // AXI PS Slave GP1 ARADDR[31:0], input
.SAXIGP1ARVALID(), // AXI PS Slave GP1 ARVALID, input
.SAXIGP1ARREADY(), // AXI PS Slave GP1 ARREADY, output
.SAXIGP1ARID(), // AXI PS Slave GP1 ARID[5:0], input
.SAXIGP1ARLOCK(), // AXI PS Slave GP1 ARLOCK[1:0], input
.SAXIGP1ARCACHE(), // AXI PS Slave GP1 ARCACHE[3:0], input
.SAXIGP1ARPROT(), // AXI PS Slave GP1 ARPROT[2:0], input
.SAXIGP1ARLEN(), // AXI PS Slave GP1 ARLEN[3:0], input
.SAXIGP1ARSIZE(), // AXI PS Slave GP1 ARSIZE[1:0], input
.SAXIGP1ARBURST(), // AXI PS Slave GP1 ARBURST[1:0], input
.SAXIGP1ARQOS(), // AXI PS Slave GP1 ARQOS[3:0], input
.SAXIGP1ARADDR(), // AXI PS Slave GP1 ARADDR[31:0], input
.SAXIGP1ARVALID(), // AXI PS Slave GP1 ARVALID, input
.SAXIGP1ARREADY(), // AXI PS Slave GP1 ARREADY, output
.SAXIGP1ARID(), // AXI PS Slave GP1 ARID[5:0], input
.SAXIGP1ARLOCK(), // AXI PS Slave GP1 ARLOCK[1:0], input
.SAXIGP1ARCACHE(), // AXI PS Slave GP1 ARCACHE[3:0], input
.SAXIGP1ARPROT(), // AXI PS Slave GP1 ARPROT[2:0], input
.SAXIGP1ARLEN(), // AXI PS Slave GP1 ARLEN[3:0], input
.SAXIGP1ARSIZE(), // AXI PS Slave GP1 ARSIZE[1:0], input
.SAXIGP1ARBURST(), // AXI PS Slave GP1 ARBURST[1:0], input
.SAXIGP1ARQOS(), // AXI PS Slave GP1 ARQOS[3:0], input
// AXI PS Slave GP1: Read Data
.SAXIGP1RDATA(), // AXI PS Slave GP1 RDATA[31:0], output
.SAXIGP1RVALID(), // AXI PS Slave GP1 RVALID, output
.SAXIGP1RREADY(), // AXI PS Slave GP1 RREADY, input
.SAXIGP1RID(), // AXI PS Slave GP1 RID[5:0], output
.SAXIGP1RLAST(), // AXI PS Slave GP1 RLAST, output
.SAXIGP1RRESP(), // AXI PS Slave GP1 RRESP[1:0], output
.SAXIGP1RDATA(), // AXI PS Slave GP1 RDATA[31:0], output
.SAXIGP1RVALID(), // AXI PS Slave GP1 RVALID, output
.SAXIGP1RREADY(), // AXI PS Slave GP1 RREADY, input
.SAXIGP1RID(), // AXI PS Slave GP1 RID[5:0], output
.SAXIGP1RLAST(), // AXI PS Slave GP1 RLAST, output
.SAXIGP1RRESP(), // AXI PS Slave GP1 RRESP[1:0], output
// AXI PS Slave GP1: Write Address
.SAXIGP1AWADDR (saxi1_awaddr), // AXI PS Slave GP1 AWADDR[31:0], input
.SAXIGP1AWVALID (saxi1_awvalid), // AXI PS Slave GP1 AWVALID, input
......@@ -2968,30 +3170,30 @@ assign axi_grst = axi_rst_pre;
// AXI PS Slave HP1
// AXI PS Slave 1: Clock, Reset
.SAXIHP1ACLK (hclk), // AXI PS Slave HP1 Clock , input
.SAXIHP1ARESETN(), // AXI PS Slave HP1 Reset, output
.SAXIHP1ACLK (hclk), // AXI PS Slave HP1 Clock , input
.SAXIHP1ARESETN(), // AXI PS Slave HP1 Reset, output
// AXI PS Slave HP1: Read Address - unused
.SAXIHP1ARADDR(), // AXI PS Slave HP1 ARADDR[31:0], input
.SAXIHP1ARVALID(), // AXI PS Slave HP1 ARVALID, input
.SAXIHP1ARREADY(), // AXI PS Slave HP1 ARREADY, output
.SAXIHP1ARID(), // AXI PS Slave HP1 ARID[5:0], input
.SAXIHP1ARLOCK(), // AXI PS Slave HP1 ARLOCK[1:0], input
.SAXIHP1ARCACHE(), // AXI PS Slave HP1 ARCACHE[3:0], input
.SAXIHP1ARPROT(), // AXI PS Slave HP1 ARPROT[2:0], input
.SAXIHP1ARLEN(), // AXI PS Slave HP1 ARLEN[3:0], input
.SAXIHP1ARSIZE(), // AXI PS Slave HP1 ARSIZE[2:0], input
.SAXIHP1ARBURST(), // AXI PS Slave HP1 ARBURST[1:0], input
.SAXIHP1ARQOS(), // AXI PS Slave HP1 ARQOS[3:0], input
.SAXIHP1ARADDR(), // AXI PS Slave HP1 ARADDR[31:0], input
.SAXIHP1ARVALID(), // AXI PS Slave HP1 ARVALID, input
.SAXIHP1ARREADY(), // AXI PS Slave HP1 ARREADY, output
.SAXIHP1ARID(), // AXI PS Slave HP1 ARID[5:0], input
.SAXIHP1ARLOCK(), // AXI PS Slave HP1 ARLOCK[1:0], input
.SAXIHP1ARCACHE(), // AXI PS Slave HP1 ARCACHE[3:0], input
.SAXIHP1ARPROT(), // AXI PS Slave HP1 ARPROT[2:0], input
.SAXIHP1ARLEN(), // AXI PS Slave HP1 ARLEN[3:0], input
.SAXIHP1ARSIZE(), // AXI PS Slave HP1 ARSIZE[2:0], input
.SAXIHP1ARBURST(), // AXI PS Slave HP1 ARBURST[1:0], input
.SAXIHP1ARQOS(), // AXI PS Slave HP1 ARQOS[3:0], input
// AXI PS Slave HP1: Read Data
.SAXIHP1RDATA(), // AXI PS Slave HP1 RDATA[63:0], output
.SAXIHP1RVALID(), // AXI PS Slave HP1 RVALID, output
.SAXIHP1RREADY(), // AXI PS Slave HP1 RREADY, input
.SAXIHP1RID(), // AXI PS Slave HP1 RID[5:0], output
.SAXIHP1RLAST(), // AXI PS Slave HP1 RLAST, output
.SAXIHP1RRESP(), // AXI PS Slave HP1 RRESP[1:0], output
.SAXIHP1RCOUNT(), // AXI PS Slave HP1 RCOUNT[7:0], output
.SAXIHP1RACOUNT(), // AXI PS Slave HP1 RACOUNT[2:0], output
.SAXIHP1RDISSUECAP1EN(), // AXI PS Slave HP1 RDISSUECAP1EN, input
.SAXIHP1RDATA(), // AXI PS Slave HP1 RDATA[63:0], output
.SAXIHP1RVALID(), // AXI PS Slave HP1 RVALID, output
.SAXIHP1RREADY(), // AXI PS Slave HP1 RREADY, input
.SAXIHP1RID(), // AXI PS Slave HP1 RID[5:0], output
.SAXIHP1RLAST(), // AXI PS Slave HP1 RLAST, output
.SAXIHP1RRESP(), // AXI PS Slave HP1 RRESP[1:0], output
.SAXIHP1RCOUNT(), // AXI PS Slave HP1 RCOUNT[7:0], output
.SAXIHP1RACOUNT(), // AXI PS Slave HP1 RACOUNT[2:0], output
.SAXIHP1RDISSUECAP1EN(), // AXI PS Slave HP1 RDISSUECAP1EN, input
// AXI PS Slave HP1: Write Address
.SAXIHP1AWADDR (afi1_awaddr), // AXI PS Slave HP1 AWADDR[31:0], input
.SAXIHP1AWVALID (afi1_awvalid), // AXI PS Slave HP1 AWVALID, input
......@@ -3022,30 +3224,31 @@ assign axi_grst = axi_rst_pre;
// AXI PS Slave HP2
// AXI PS Slave HP2: Clock, Reset
.SAXIHP2ACLK(), // AXI PS Slave HP2 Clock , input
.SAXIHP2ARESETN(), // AXI PS Slave HP2 Reset, output
// TODO: Clock was not connected (currently this port is not used) - make it depend on parameters
.SAXIHP2ACLK (afi1_clk), // AXI PS Slave HP2 Clock , input ==hclk or 1'b0 if not used
.SAXIHP2ARESETN (), // AXI PS Slave HP2 Reset, output
// AXI PS Slave HP2: Read Address - not used
.SAXIHP2ARADDR(), // AXI PS Slave HP2 ARADDR[31:0], input
.SAXIHP2ARVALID(), // AXI PS Slave HP2 ARVALID, input
.SAXIHP2ARREADY(), // AXI PS Slave HP2 ARREADY, output
.SAXIHP2ARID(), // AXI PS Slave HP2 ARID[5:0], input
.SAXIHP2ARLOCK(), // AXI PS Slave HP2 ARLOCK[1:0], input
.SAXIHP2ARCACHE(), // AXI PS Slave HP2 ARCACHE[3:0], input
.SAXIHP2ARPROT(), // AXI PS Slave HP2 ARPROT[2:0], input
.SAXIHP2ARLEN(), // AXI PS Slave HP2 ARLEN[3:0], input
.SAXIHP2ARSIZE(), // AXI PS Slave HP2 ARSIZE[2:0], input
.SAXIHP2ARBURST(), // AXI PS Slave HP2 ARBURST[1:0], input
.SAXIHP2ARQOS(), // AXI PS Slave HP2 ARQOS[3:0], input
.SAXIHP2ARADDR (), // AXI PS Slave HP2 ARADDR[31:0], input
.SAXIHP2ARVALID (), // AXI PS Slave HP2 ARVALID, input
.SAXIHP2ARREADY (), // AXI PS Slave HP2 ARREADY, output
.SAXIHP2ARID (), // AXI PS Slave HP2 ARID[5:0], input
.SAXIHP2ARLOCK (), // AXI PS Slave HP2 ARLOCK[1:0], input
.SAXIHP2ARCACHE (), // AXI PS Slave HP2 ARCACHE[3:0], input
.SAXIHP2ARPROT (), // AXI PS Slave HP2 ARPROT[2:0], input
.SAXIHP2ARLEN (), // AXI PS Slave HP2 ARLEN[3:0], input
.SAXIHP2ARSIZE (), // AXI PS Slave HP2 ARSIZE[2:0], input
.SAXIHP2ARBURST (), // AXI PS Slave HP2 ARBURST[1:0], input
.SAXIHP2ARQOS (), // AXI PS Slave HP2 ARQOS[3:0], input
// AXI PS Slave HP2: Read Data - not used
.SAXIHP2RDATA(), // AXI PS Slave HP2 RDATA[63:0], output
.SAXIHP2RVALID(), // AXI PS Slave HP2 RVALID, output
.SAXIHP2RREADY(), // AXI PS Slave HP2 RREADY, input
.SAXIHP2RID(), // AXI PS Slave HP2 RID[5:0], output
.SAXIHP2RLAST(), // AXI PS Slave HP2 RLAST, output
.SAXIHP2RRESP(), // AXI PS Slave HP2 RRESP[1:0], output
.SAXIHP2RCOUNT(), // AXI PS Slave HP2 RCOUNT[7:0], output
.SAXIHP2RACOUNT(), // AXI PS Slave HP2 RACOUNT[2:0], output
.SAXIHP2RDISSUECAP1EN(), // AXI PS Slave HP2 RDISSUECAP1EN, input
.SAXIHP2RDATA (), // AXI PS Slave HP2 RDATA[63:0], output
.SAXIHP2RVALID (), // AXI PS Slave HP2 RVALID, output
.SAXIHP2RREADY (), // AXI PS Slave HP2 RREADY, input
.SAXIHP2RID (), // AXI PS Slave HP2 RID[5:0], output
.SAXIHP2RLAST (), // AXI PS Slave HP2 RLAST, output
.SAXIHP2RRESP (), // AXI PS Slave HP2 RRESP[1:0], output
.SAXIHP2RCOUNT (), // AXI PS Slave HP2 RCOUNT[7:0], output
.SAXIHP2RACOUNT (), // AXI PS Slave HP2 RACOUNT[2:0], output
.SAXIHP2RDISSUECAP1EN (), // AXI PS Slave HP2 RDISSUECAP1EN, input
// AXI PS Slave HP2: Write Address
.SAXIHP2AWADDR (afi2_awaddr), // AXI PS Slave HP2 AWADDR[31:0], input
.SAXIHP2AWVALID (afi2_awvalid), // AXI PS Slave HP2 AWVALID, input
......@@ -3076,57 +3279,57 @@ assign axi_grst = axi_rst_pre;
// AXI PS Slave HP3
// AXI PS Slave HP3: Clock, Reset
.SAXIHP3ACLK(), // AXI PS Slave HP3 Clock , input
.SAXIHP3ACLK (hclk), // AXI PS Slave HP3 Clock , input
.SAXIHP3ARESETN(), // AXI PS Slave HP3 Reset, output
// AXI PS Slave HP3: Read Address
.SAXIHP3ARADDR(), // AXI PS Slave HP3 ARADDR[31:0], input
.SAXIHP3ARVALID(), // AXI PS Slave HP3 ARVALID, input
.SAXIHP3ARREADY(), // AXI PS Slave HP3 ARREADY, output
.SAXIHP3ARID(), // AXI PS Slave HP3 ARID[5:0], input
.SAXIHP3ARLOCK(), // AXI PS Slave HP3 ARLOCK[1:0], input
.SAXIHP3ARCACHE(), // AXI PS Slave HP3 ARCACHE[3:0], input
.SAXIHP3ARPROT(), // AXI PS Slave HP3 ARPROT[2:0], input
.SAXIHP3ARLEN(), // AXI PS Slave HP3 ARLEN[3:0], input
.SAXIHP3ARSIZE(), // AXI PS Slave HP3 ARSIZE[2:0], input
.SAXIHP3ARBURST(), // AXI PS Slave HP3 ARBURST[1:0], input
.SAXIHP3ARQOS(), // AXI PS Slave HP3 ARQOS[3:0], input
// AXI PS Slave HP3: Read Address
.SAXIHP3ARADDR (afi3_araddr), // AXI PS Slave HP3 ARADDR[31:0], input
.SAXIHP3ARVALID (afi3_arvalid), // AXI PS Slave HP3 ARVALID, input
.SAXIHP3ARREADY (afi3_arready), // AXI PS Slave HP3 ARREADY, output
.SAXIHP3ARID (afi3_arid), // AXI PS Slave HP3 ARID[5:0], input
.SAXIHP3ARLOCK (afi3_arlock), // AXI PS Slave HP3 ARLOCK[1:0], input
.SAXIHP3ARCACHE (afi3_arcache), // AXI PS Slave HP3 ARCACHE[3:0], input
.SAXIHP3ARPROT (afi3_arprot), // AXI PS Slave HP3 ARPROT[2:0], input
.SAXIHP3ARLEN (afi3_arlen), // AXI PS Slave HP3 ARLEN[3:0], input
.SAXIHP3ARSIZE (afi3_arsize), // AXI PS Slave HP3 ARSIZE[2:0], input
.SAXIHP3ARBURST (afi3_arburst), // AXI PS Slave HP3 ARBURST[1:0], input
.SAXIHP3ARQOS (afi3_arqos), // AXI PS Slave HP3 ARQOS[3:0], input
// AXI PS Slave HP3: Read Data
.SAXIHP3RDATA(), // AXI PS Slave HP3 RDATA[63:0], output
.SAXIHP3RVALID(), // AXI PS Slave HP3 RVALID, output
.SAXIHP3RREADY(), // AXI PS Slave HP3 RREADY, input
.SAXIHP3RID(), // AXI PS Slave HP3 RID[5:0], output
.SAXIHP3RLAST(), // AXI PS Slave HP3 RLAST, output
.SAXIHP3RRESP(), // AXI PS Slave HP3 RRESP[1:0], output
.SAXIHP3RCOUNT(), // AXI PS Slave HP3 RCOUNT[7:0], output
.SAXIHP3RACOUNT(), // AXI PS Slave HP3 RACOUNT[2:0], output
.SAXIHP3RDISSUECAP1EN(), // AXI PS Slave HP3 RDISSUECAP1EN, input
// AXI PS Slave HP3: Write Address
.SAXIHP3AWADDR(), // AXI PS Slave HP3 AWADDR[31:0], input
.SAXIHP3AWVALID(), // AXI PS Slave HP3 AWVALID, input
.SAXIHP3AWREADY(), // AXI PS Slave HP3 AWREADY, output
.SAXIHP3AWID(), // AXI PS Slave HP3 AWID[5:0], input
.SAXIHP3AWLOCK(), // AXI PS Slave HP3 AWLOCK[1:0], input
.SAXIHP3AWCACHE(), // AXI PS Slave HP3 AWCACHE[3:0], input
.SAXIHP3AWPROT(), // AXI PS Slave HP3 AWPROT[2:0], input
.SAXIHP3AWLEN(), // AXI PS Slave HP3 AWLEN[3:0], input
.SAXIHP3AWSIZE(), // AXI PS Slave HP3 AWSIZE[1:0], input
.SAXIHP3AWBURST(), // AXI PS Slave HP3 AWBURST[1:0], input
.SAXIHP3AWQOS(), // AXI PS Slave HP3 AWQOS[3:0], input
.SAXIHP3RDATA (afi3_rdata), // AXI PS Slave HP3 RDATA[63:0], output
.SAXIHP3RVALID (afi3_rvalid), // AXI PS Slave HP3 RVALID, output
.SAXIHP3RREADY (afi3_rready), // AXI PS Slave HP3 RREADY, input
.SAXIHP3RID (afi3_rid), // AXI PS Slave HP3 RID[5:0], output
.SAXIHP3RLAST (afi3_rlast), // AXI PS Slave HP3 RLAST, output
.SAXIHP3RRESP (afi3_rresp), // AXI PS Slave HP3 RRESP[1:0], output
.SAXIHP3RCOUNT (afi3_rcount), // AXI PS Slave HP3 RCOUNT[7:0], output
.SAXIHP3RACOUNT (afi3_racount), // AXI PS Slave HP3 RACOUNT[2:0], output
.SAXIHP3RDISSUECAP1EN (afi3_rdissuecap1en), // AXI PS Slave HP3 RDISSUECAP1EN, input
// AXI PS Slave HP3: Write Address
.SAXIHP3AWADDR (afi3_awaddr), // AXI PS Slave HP3 AWADDR[31:0], input
.SAXIHP3AWVALID (afi3_awvalid), // AXI PS Slave HP3 AWVALID, input
.SAXIHP3AWREADY (afi3_awready), // AXI PS Slave HP3 AWREADY, output
.SAXIHP3AWID (afi3_awid), // AXI PS Slave HP3 AWID[5:0], input
.SAXIHP3AWLOCK (afi3_awlock), // AXI PS Slave HP3 AWLOCK[1:0], input
.SAXIHP3AWCACHE (afi3_awcache), // AXI PS Slave HP3 AWCACHE[3:0], input
.SAXIHP3AWPROT (afi3_awprot), // AXI PS Slave HP3 AWPROT[2:0], input
.SAXIHP3AWLEN (afi3_awlen), // AXI PS Slave HP3 AWLEN[3:0], input
.SAXIHP3AWSIZE (afi3_awsize), // AXI PS Slave HP3 AWSIZE[1:0], input
.SAXIHP3AWBURST (afi3_awburst), // AXI PS Slave HP3 AWBURST[1:0], input
.SAXIHP3AWQOS (afi3_awqos), // AXI PS Slave HP3 AWQOS[3:0], input
// AXI PS Slave HP3: Write Data
.SAXIHP3WDATA(), // AXI PS Slave HP3 WDATA[63:0], input
.SAXIHP3WVALID(), // AXI PS Slave HP3 WVALID, input
.SAXIHP3WREADY(), // AXI PS Slave HP3 WREADY, output
.SAXIHP3WID(), // AXI PS Slave HP3 WID[5:0], input
.SAXIHP3WLAST(), // AXI PS Slave HP3 WLAST, input
.SAXIHP3WSTRB(), // AXI PS Slave HP3 WSTRB[7:0], input
.SAXIHP3WCOUNT(), // AXI PS Slave HP3 WCOUNT[7:0], output
.SAXIHP3WACOUNT(), // AXI PS Slave HP3 WACOUNT[5:0], output
.SAXIHP3WRISSUECAP1EN(), // AXI PS Slave HP3 WRISSUECAP1EN, input
.SAXIHP3WDATA (afi3_wdata), // AXI PS Slave HP3 WDATA[63:0], input
.SAXIHP3WVALID (afi3_wvalid), // AXI PS Slave HP3 WVALID, input
.SAXIHP3WREADY (afi3_wready), // AXI PS Slave HP3 WREADY, output
.SAXIHP3WID (afi3_wid), // AXI PS Slave HP3 WID[5:0], input
.SAXIHP3WLAST (afi3_wlast), // AXI PS Slave HP3 WLAST, input
.SAXIHP3WSTRB (afi3_wstrb), // AXI PS Slave HP3 WSTRB[7:0], input
.SAXIHP3WCOUNT (afi3_wcount), // AXI PS Slave HP3 WCOUNT[7:0], output
.SAXIHP3WACOUNT (afi3_wacount), // AXI PS Slave HP3 WACOUNT[5:0], output
.SAXIHP3WRISSUECAP1EN (afi3_wrissuecap1en), // AXI PS Slave HP3 WRISSUECAP1EN, input
// AXI PS Slave HP3: Write response
.SAXIHP3BVALID(), // AXI PS Slave HP3 BVALID, output
.SAXIHP3BREADY(), // AXI PS Slave HP3 BREADY, input
.SAXIHP3BID(), // AXI PS Slave HP3 BID[5:0], output
.SAXIHP3BRESP(), // AXI PS Slave HP3 BRESP[1:0], output
.SAXIHP3BVALID (afi3_bvalid), // AXI PS Slave HP3 BVALID, output
.SAXIHP3BREADY (afi3_bready), // AXI PS Slave HP3 BREADY, input
.SAXIHP3BID (afi3_bid), // AXI PS Slave HP3 BID[5:0], output
.SAXIHP3BRESP (afi3_bresp), // AXI PS Slave HP3 BRESP[1:0], output
// AXI PS Slave ACP
// AXI PS Slave ACP: Clock, Reset
......
x393_hispi.xdc
View file @ a06aacce
......@@ -230,3 +230,17 @@ set_property PACKAGE_PIN AB18 [get_ports {sns4_scl}]
set_property PACKAGE_PIN AB19 [get_ports {sns4_sda}]
set_property PACKAGE_PIN Y17 [get_ports {sns4_ctl}]
set_property PACKAGE_PIN Y18 [get_ports {sns4_pg}]
# ===================== SATA ======================
# bind gtx reference clock
set_property PACKAGE_PIN U6 [get_ports EXTCLK_P]
set_property PACKAGE_PIN U5 [get_ports EXTCLK_N]
# bind sata inputs/outputs
set_property PACKAGE_PIN AA5 [get_ports RXN]
set_property PACKAGE_PIN AA6 [get_ports RXP]
set_property PACKAGE_PIN AB3 [get_ports TXN]
set_property PACKAGE_PIN AB4 [get_ports TXP]
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment