trying synthesis

.project

@@ -92,7 +92,7 @@
 		<link>
 			<name>vivado_logs/VivadoSynthesis.log</name>
 			<type>1</type>
-			<location>/home/andrey/git/x393/vivado_logs/VivadoSynthesis-20150718203305908.log</location>
+			<location>/home/andrey/git/x393/vivado_logs/VivadoSynthesis-20150719165235946.log</location>
 		</link>
 		<link>
 			<name>vivado_logs/VivadoTimimgSummaryReportImplemented.log</name>
@@ -102,7 +102,7 @@
 		<link>
 			<name>vivado_logs/VivadoTimimgSummaryReportSynthesis.log</name>
 			<type>1</type>
-			<location>/home/andrey/git/x393/vivado_logs/VivadoTimimgSummaryReportSynthesis-20150718203305908.log</location>
+			<location>/home/andrey/git/x393/vivado_logs/VivadoTimimgSummaryReportSynthesis-20150719165235946.log</location>
 		</link>
 		<link>
 			<name>vivado_logs/VivadoTimingReportImplemented.log</name>
@@ -112,7 +112,7 @@
 		<link>
 			<name>vivado_logs/VivadoTimingReportSynthesis.log</name>
 			<type>1</type>
-			<location>/home/andrey/git/x393/vivado_logs/VivadoTimingReportSynthesis-20150718203305908.log</location>
+			<location>/home/andrey/git/x393/vivado_logs/VivadoTimingReportSynthesis-20150719165235946.log</location>
 		</link>
 		<link>
 			<name>vivado_state/x393-opt-phys.dcp</name>
@@ -132,7 +132,7 @@
 		<link>
 			<name>vivado_state/x393-synth.dcp</name>
 			<type>1</type>
-			<location>/home/andrey/git/x393/vivado_state/x393-synth-20150718203305908.dcp</location>
+			<location>/home/andrey/git/x393/vivado_state/x393-synth-20150719165235946.dcp</location>
 		</link>
 	</linkedResources>
 </projectDescription>

.settings/com.elphel.vdt.VivadoSynthesis.prefs

@@ -4,6 +4,6 @@ VivadoSynthesis_115_flatten_hierarchy=none
 VivadoSynthesis_127_verbose=true
 VivadoSynthesis_81_parser_mode=1
 VivadoSynthesis_93_OtherProblems=Netlist 29-345<-@\#\#@->Board 49-26<-@\#\#@->
-VivadoSynthesis_95_ShowInfo=false
+VivadoSynthesis_95_ShowInfo=true
 com.elphel.store.context.VivadoSynthesis=VivadoSynthesis_102_ConstraintsFiles<-@\#\#@->VivadoSynthesis_95_ShowInfo<-@\#\#@->VivadoSynthesis_115_flatten_hierarchy<-@\#\#@->VivadoSynthesis_101_MaxMsg<-@\#\#@->VivadoSynthesis_127_verbose<-@\#\#@->VivadoSynthesis_93_OtherProblems<-@\#\#@->VivadoSynthesis_81_parser_mode<-@\#\#@->
 eclipse.preferences.version=1

axi/cmprs_afi_mux_status.v

@@ -46,10 +46,10 @@ module  cmprs_afi_mux_status #(
     output reg               [3:0] chunk_ptr_ra, // full pointer address - {eof,wresp,chn[1:0]}
     input [CMPRS_AFIMUX_WIDTH-1:0] chunk_ptr_rd  // pointer data
 );
-    reg [15:0] mode_data_mclk; // some bits unused
+   localparam MODE_IDTH = 15;
+    reg              [MODE_IDTH-1:0] mode_data_mclk; // some bits unused
     wire                             mode_we_hclk;
     reg                        [7:0] mode_hclk;
-
     reg                        [1:0] index;
     reg   [CMPRS_AFIMUX_CYCBITS-1:0] cntr;
     reg     [CMPRS_AFIMUX_WIDTH-1:0] chunk_ptr_hclk;  // pointer data
@@ -67,7 +67,7 @@ module  cmprs_afi_mux_status #(
     
     assign stb_w = en && (cntr==0);
     always @ (posedge mclk) begin
-        if (mode_we) mode_data_mclk <= cmd_data[15:0];
+        if (mode_we) mode_data_mclk <= cmd_data[MODE_IDTH-1:0];
     end
 
     always @ (posedge hclk) begin

compressor_jp/cmprs_buf_average.v

@@ -110,7 +110,8 @@ module  cmprs_buf_average#(
     wire [1:0] pre_accCdone; // need to make sure that pre_accCdone do_r not happen with pre_accYdone
     reg  [3:0] accYrun;
     reg  [1:0] accCrun;
-    reg  [3:0] accYdone; // only bit 0 is used as a start of output
+//    reg  [3:0] accYdone; // only bit 0 is used as a start of output
+    reg        accYdone; // only bit 0 is used as a start of output
     reg        accYdoneAny;
     reg  [1:0] avrY_wa, pre_avrY_wa;
     reg        avrC_wa, pre_avrC_wa;
@@ -199,7 +200,8 @@ module  cmprs_buf_average#(
         accYrun[3:0] <= {4{frame_en}} & ((accYfirst[3:0] & accYen[3:0]) | (accYrun[3:0] & ~pre_accYdone[3:0]));
         accCrun[1:0] <= {2{frame_en}} & ((accCfirst[1:0] & accCen[1:0]) | (accCrun[1:0] & ~pre_accCdone[1:0]));
         
-        accYdone[3:0] <=  pre_accYdone[3:0] & accYrun[3:0];
+//        accYdone[3:0] <=  pre_accYdone[3:0] & accYrun[3:0];
+        accYdone      <=  pre_accYdone[0] & accYrun[0];
         accYdoneAny   <=  |(pre_accYdone[3:0] & accYrun[3:0]);
         avr_we        <=  |(pre_accYdone[3:0] & accYrun[3:0]) || |(pre_accCdone[1:0] & accCrun[1:0]);
         
@@ -284,11 +286,11 @@ module  cmprs_buf_average#(
         case (converter_type_r)
             CMPRS_COLOR18: ccv_out_start <= (yaddrw[7:0]==8'hc4); //TODO: adjust to minimal latency?
             CMPRS_COLOR20: ccv_out_start <= (yaddrw[7:0]==8'hc4); //TODO: adjust to minimal latency?
-            CMPRS_MONO16:  ccv_out_start    <=  accYdone[0];
-            CMPRS_JP4:     ccv_out_start    <=  accYdone[0];
-            CMPRS_JP4DIFF: ccv_out_start    <=  accYdone[0];
-            CMPRS_MONO8:   ccv_out_start    <=  accYdone[0];
-            default:       ccv_out_start    <=  accYdone[0];
+            CMPRS_MONO16:  ccv_out_start    <=  accYdone; //[0];
+            CMPRS_JP4:     ccv_out_start    <=  accYdone; //[0];
+            CMPRS_JP4DIFF: ccv_out_start    <=  accYdone; //[0];
+            CMPRS_MONO8:   ccv_out_start    <=  accYdone; //[0];
+            default:       ccv_out_start    <=  accYdone; //[0];
         endcase
     end    
     

compressor_jp/cmprs_cmd_decode.v

@@ -305,7 +305,7 @@ module  cmprs_cmd_decode#(
     
     always @ (posedge xclk) begin
          if (format_we_xclk)    format_xclk <=    format_mclk;
-         if (color_sat_we_xclk) color_sat_xclk <= color_sat_mclk;
+         if (color_sat_we_xclk) color_sat_xclk <= color_sat_mclk; // SuppressThisWarning VivadoSynthesis
          if (coring_we_xclk)    coring_xclk <=    coring_mclk;
     end
 

compressor_jp/cmprs_macroblock_buf_iface.v

@@ -85,7 +85,8 @@ module  cmprs_macroblock_buf_iface #(
     reg    [ 2:0] next_valid;     // number of next valid page (only 2 LSB are actual page number)
     reg    [ 2:0] next_invalid;   // oldest valid page
     reg    [ 1:0] add_invalid;    // advance next_invalid pointer by this value, send next_page pulses
-    reg    [ 2:0] used_pages;     // number of pages simultaneously used for the last macroblock
+//    reg    [ 2:0] used_pages;    // number of pages simultaneously used for the last macroblock
+    reg    [ 1:0] used_pages;     // number of pages simultaneously used for the last macroblock - [2] was never used
     reg    [ 2:0] needed_page;    // calculate at MB start
     reg           pre_first_mb;   // from frame start to mb_pre_start[2]
 //    reg           first_mb;       // from mb_pre_start[2]  to mb_pre_start[1]
@@ -183,7 +184,8 @@ module  cmprs_macroblock_buf_iface #(
                             pre_advance_tiles[1:0]  <= {1'b0, mbl_x_inc_r[7]}; 
                         end
             endcase
-            used_pages <= needed_page - next_invalid +1;
+//            used_pages <= needed_page - next_invalid +1;
+            used_pages <= needed_page[1:0] - next_invalid[1:0] +1; // nit [2] not used
         end
         if  (mb_pre_start[7]) begin // TODO: apply after delay, regardless last or not
             if (mb_last_in_row) add_invalid <= used_pages[1:0];

compressor_jp/csconvert.v

@@ -268,6 +268,18 @@ module  csconvert#(
 //          pre_color_enable <= 1'b0;
 //          ccv_out_start    <=  accYdone[0];
          end
+    default:begin //color 18 (or try 'X'
+          pre_first_out    <= 'bx; // conv18_pre_first_out;
+          signed_y[8:0]    <= 'bx; // {conv18_signed_y[7],conv18_signed_y[7:0]};
+          ywe              <= 'bx; //conv18_ywe;
+          yaddrw[7:0]      <= 'bx; //{conv18_yaddrw[7],conv18_yaddrw[3],conv18_yaddrw[6:4],conv18_yaddrw[2:0]};
+          signed_c[8:0]    <= 'bx; //{conv18_signed_c[8:0]};
+          cwe              <= 'bx; //conv18_cwe;
+          caddrw[7:0]      <= 'bx; //{1'b0,conv18_caddrw[6:0]};
+          n000             <= 'bx; //conv18_n000;
+          n255             <= 'bx; //conv18_n255;
+         end
+         
   endcase
 
     

compressor_jp/csconvert18a.v

@@ -380,13 +380,13 @@ module csconvert18a(
 // second term is pa1, third - (pd0+pd2)/2
 // else
 // second term is (pa1 + (pd0+pd2)/2)/2, third - (pa0+pa2)/2
-  reg		[7:0] m1;
+//  reg		[7:0] m1; same as pd1_dly
   reg		[7:0] m2;
   reg		[7:0] m3;
   wire	[8:0]	pd02s=   {1'b0,pd_prev[7:0]}+{1'b0,pd_next[7:0]};   // will use pd02s[8:1]
   wire	[8:0]	pa1pd02s={1'b0,pa1[7:0]}+{1'b0,pd02s[8:1]}; // will use pa1pd02s[8:1]
   wire	[8:0]	pa02s=   {1'b0,pa_prev[7:0]}+{1'b0,pa_next[7:0]};   // will use pa02s[8:1]
-  always @ (posedge CLK) m1 <= pd1[7:0];
+//  always @ (posedge CLK) m1 <= pd1[7:0]; // same as pd1_dly
 //  always @ (posedge CLK) m2 <= (odd_pix==odd_line)? pa1[7:0]   : pa1pd02s[8:1];
 //  always @ (posedge CLK) m3 <= (odd_pix==odd_line)? pd02s[8:1] : pa02s[8:1];
   always @ (posedge CLK) m2 <= pix_green? pa1[7:0]   : pa1pd02s[8:1];
@@ -526,16 +526,17 @@ Y[1,1]=(0x96*P[1,1]+   0x1d*((P[1,0]+P[1,2])/2 +                 0x4d*((P[0,1] +
              end
   endcase
 
-  wire [15:0] mm1=m1[7:0]*k1[7:0];
+  wire [15:0] mm1=pd1_dly[7:0] * k1[7:0]; //m1[7:0]*k1[7:0];
   wire [15:0] mm2=m2[7:0]*k2[7:0];
   wire [15:0] mm3=m3[7:0]*k3[7:0];
 
   reg   [7:0] y;
-  reg   [7:0] y0;	// bypass in monochrome mode
+//  reg   [7:0] y0;	// bypass in monochrome mode
+  wire  [7:0] y0 = pdc;
 //  wire   [7:0] y0;	// bypass in monochrome mode
   reg   [15:0] y1,y2,y3; 
   wire	[15:0] y_sum =y1+y2+y3;
-  always @ (posedge CLK) y0 <= m1;
+//  always @ (posedge CLK) y0 <= pd1_dly; // m1; // equivalent
   always @ (posedge CLK) y1 <= mm1;
   always @ (posedge CLK) y2 <= mm2;
   always @ (posedge CLK) y3 <= mm3;

compressor_jp/focus_sharp393.v

@@ -85,7 +85,8 @@ module focus_sharp393(
     reg    [11:0] di_d;
     reg    [11:0] d1; 
     reg     [8:0] start2;
-    reg     [7:0] finish2;
+//    reg     [7:0] finish2;
+    reg     [6:0] finish2; // bit[7] never used
     reg     [5:0] use_k_dly;
     reg    [23:0] acc_blk; // accumulator for the sum ((a[i]*d[i])^2)
     reg    [22:0] sum_blk; // accumulator for the sum ((a[i]*d[i])^2), copied at block end
@@ -141,6 +142,7 @@ module focus_sharp393(
               3'h4: wnd_totalwidth[8:1] <= wnd_reg[11:4] ;
               3'h5: filt_sel0[3:0]      <= wnd_reg[3:0] ;
               3'h6: stren               <= wnd_reg[0] ;
+              default: begin end
             endcase
         end
      end
@@ -193,10 +195,12 @@ module focus_sharp393(
         filt_sel[3:0] <= filt_sel0[3:0];
         if (clksync[2]) d1[11:0]<=di_d[11:0];
         start2[8:0] <= {start2[7:0], start && csync};
-        finish2[7:0]<= {finish2[6:0],use_coef && !next_ac};
+//        finish2[7:0]<= {finish2[6:0],use_coef && !next_ac};
+        finish2[6:0]<= {finish2[5:0],use_coef && !next_ac}; // finish2[7] was never used
         if      (!en || start2[0]) tba[5:0] <= 6'h0;
         else if (!csync && (tba[5:0] != 6'h3f))   tba[5:0] <= tba[5:0] + 1;
-        mult_s[17:0] <= (&mult_p[35:31] || !(&mult_p[35:31]))?mult_p[31:14]:18'h1ffff;
+//        mult_s[17:0] <= (&mult_p[35:31] || !(&mult_p[35:31]))?mult_p[31:14]:18'h1ffff;
+        mult_s[17:0] <= (&mult_p[35:31] || !(|mult_p[35:31]))?mult_p[31:14]:18'h1ffff;
         next_ac <= en && (start2[3] || (next_ac && ((tba[5:0] != 6'h3f) || csync )));
         use_coef <= next_ac && !csync;
         use_k_dly[5:0] <= {use_k_dly[4:0],use_coef};

includes/x393_parameters.vh

@@ -650,18 +650,18 @@
     parameter BUF_CLK1X_PCLK =            "BUFG",
     parameter BUF_CLK1X_PCLK2X =          "BUFG",  
     
-    parameter CLKIN_PERIOD_XCLK =         20, // 24MHz 
+    parameter CLKIN_PERIOD_XCLK =         20, // 50MHz 
     parameter DIVCLK_DIVIDE_XCLK =         1,
-    parameter CLKFBOUT_MULT_XCLK =        50, // 1000 MHz
+    parameter CLKFBOUT_MULT_XCLK =        20, // 50*20=1000 MHz
     parameter CLKOUT_DIV_XCLK =           10, // 100 MHz 
     parameter CLKOUT_DIV_XCLK2X =          5, // 200 MHz
     parameter PHASE_CLK2X_XCLK =           0.000, 
     parameter BUF_CLK1X_XCLK =            "BUFG",
     parameter BUF_CLK1X_XCLK2X =          "BUFG",  
     
-    parameter CLKIN_PERIOD_SYNC =         20, // 24MHz 
+    parameter CLKIN_PERIOD_SYNC =         20, // 50MHz 
     parameter DIVCLK_DIVIDE_SYNC =         1,
-    parameter CLKFBOUT_MULT_SYNC =        50, // 1000 MHz
+    parameter CLKFBOUT_MULT_SYNC =        20, // 50*20=1000 MHz
     parameter CLKOUT_DIV_SYNC =           10, // 100 MHz 
     parameter BUF_CLK1X_SYNC =            "BUFG",
     

sensor/sens_sync.v

@@ -36,7 +36,7 @@ module  sens_sync#(
     input         rst,         // global reset
     input         pclk,        // global clock input, pixel rate (96MHz for MT9P006)
     input         mclk,        // global system clock, synchronizes commands
-    input         en,          // enable channel (0 resets counters)
+    input         en,          // @pclk enable channel (0 resets counters)
     input         sof_in,      // @pclk start of frame input, single-cycle
     input         eof_in,      // @pclk end of frame input, single-cycle (to limit sof_late
     input         hact,        // @pclk (use to count lines for delayed pulse)

sensor/sensor_channel.v

@@ -51,10 +51,11 @@ module  sensor_channel#(
     parameter SENSOR_CTRL_RADDR =     0, //'h00
     parameter SENSOR_CTRL_ADDR_MASK = 'h7ff, //
         // bits of the SENSOR mode register
-        parameter SENSOR_MODE_WIDTH =     9,
-        parameter SENSOR_HIST_EN_BIT =    0, // 0..3 1 - enable histogram modules, disable after processing the started frame
-        parameter SENSOR_HIST_NRST_BIT =  4, // 0 - immediately reset all histogram modules 
-        parameter SENSOR_16BIT_BIT =      8, // 0 - 8 bpp mode, 1 - 16 bpp (bypass gamma). Gamma-processed data is still used for histograms
+        parameter SENSOR_MODE_WIDTH =     10,
+        parameter SENSOR_HIST_EN_BIT =    4,  // 0..3 1 - enable histogram modules, disable after processing the started frame
+        parameter SENSOR_HIST_NRST_BIT =  8,  // 0 - immediately reset all histogram modules 
+        parameter SENSOR_CHN_EN_BIT =     8,  // 1 - this enable channel
+        parameter SENSOR_16BIT_BIT =      9, // 0 - 8 bpp mode, 1 - 16 bpp (bypass gamma). Gamma-processed data is still used for histograms
     
     parameter SENSI2C_CTRL_RADDR =    2, // 'h02..'h03
     parameter SENSI2C_CTRL_MASK =     'h7fe,
@@ -256,6 +257,8 @@ module  sensor_channel#(
     wire         sensor_ctrl_we;
     reg    [SENSOR_MODE_WIDTH-1:0] mode;
     wire   [3:0] hist_en;
+    wire         en_mclk; // enable this channel
+    wire         en_pclk; // enabole in pclk domain   
     wire         hist_nrst;
     wire         bit16; // 16-bit mode, 0 - 8 bit mode
     wire   [3:0] hist_rq;
@@ -291,6 +294,7 @@ module  sensor_channel#(
     assign dav_w =  bit16 ? gamma_hact_in : dav_8bit;
     assign last_in_line = ! ( bit16 ? gamma_hact_in : gamma_hact_out);
      
+    assign en_mclk =   mode[SENSOR_CHN_EN_BIT];
     assign hist_en =   mode[SENSOR_HIST_EN_BIT+:4];
     assign hist_nrst = mode[SENSOR_HIST_NRST_BIT];
     assign bit16 =     mode[SENSOR_16BIT_BIT];
@@ -303,7 +307,7 @@ module  sensor_channel#(
 
     always @ (posedge  rst or posedge mclk) begin
         if      (rst)            mode <= 0;
-        else if (sensor_ctrl_we) mode <= sensor_ctrl_data[8:0];
+        else if (sensor_ctrl_we) mode <= sensor_ctrl_data[SENSOR_MODE_WIDTH-1:0];
     end
     
     always @ (posedge pclk) begin
@@ -319,6 +323,8 @@ module  sensor_channel#(
         eof_out_r <= bit16 ? gamma_eof_in : gamma_eof_out;
     end
 
+    level_cross_clocks  level_cross_clocks_en_pclk_i (.clk(pclk), .d_in(en_mclk), .d_out(en_pclk));
+    
     status_router2 status_router2_sensor_i (
         .rst       (rst),                     // input
         .clk       (mclk),                    // input
@@ -475,7 +481,7 @@ module  sensor_channel#(
         .rst          (rst),           // input
         .pclk         (pclk),          // input
         .mclk         (mclk),          // input
-        .en(), // input
+        .en           (en_pclk),       // input @pclk
         .sof_in       (sof),           // input
         .eof_in       (eof),           // input
         .hact         (hact),          // input
@@ -489,9 +495,6 @@ module  sensor_channel#(
         .cmd_stb      (cmd_stb)        // input
     );
 
-
-
-
     sens_gamma #(
         .SENS_GAMMA_NUM_CHN    (SENS_GAMMA_NUM_CHN),
         .SENS_GAMMA_BUFFER     (SENS_GAMMA_BUFFER),

util_modules/clocks393.v

@@ -42,18 +42,18 @@ module  clocks393#(
         parameter BUF_CLK1X_PCLK =            "BUFG",
         parameter BUF_CLK1X_PCLK2X =          "BUFG",  
         
-        parameter CLKIN_PERIOD_XCLK =         20, // 24MHz 
+        parameter CLKIN_PERIOD_XCLK =         20, // 50MHz 
         parameter DIVCLK_DIVIDE_XCLK =         1,
-        parameter CLKFBOUT_MULT_XCLK =        50, // 1000 MHz
+        parameter CLKFBOUT_MULT_XCLK =        20, // 50*20=1000 MHz
         parameter CLKOUT_DIV_XCLK =           10, // 100 MHz 
         parameter CLKOUT_DIV_XCLK2X =          5, // 200 MHz
         parameter PHASE_CLK2X_XCLK =           0.000, 
         parameter BUF_CLK1X_XCLK =            "BUFG",
         parameter BUF_CLK1X_XCLK2X =          "BUFG",  
         
-        parameter CLKIN_PERIOD_SYNC =         20, // 24MHz 
+        parameter CLKIN_PERIOD_SYNC =         20, // 50MHz 
         parameter DIVCLK_DIVIDE_SYNC =         1,
-        parameter CLKFBOUT_MULT_SYNC =        50, // 1000 MHz
+        parameter CLKFBOUT_MULT_SYNC =        20, // 50*20=1000 MHz
         parameter CLKOUT_DIV_SYNC =           10, // 100 MHz 
         parameter BUF_CLK1X_SYNC =            "BUFG",
         

util_modules/cmd_frame_sequencer.v

@@ -92,7 +92,7 @@ module  cmd_frame_sequencer#(
     reg                         we_fifo_wp;     // enable writing to fifo write pointer memory
     reg                         next_frame_rq;  // request to switch to the new frame page, clear pointer for the one just left
     wire                        pre_wpage_inc;
-    reg         [PNTR_WIDH-1:0] fifo_wr_pointers_ram [0:7];
+    reg         [PNTR_WIDH-1:0] fifo_wr_pointers_ram [0:15];
     wire        [PNTR_WIDH-1:0] fifo_wr_pointers_outw=fifo_wr_pointers_ram[wpage_w];
     wire        [PNTR_WIDH-1:0] fifo_wr_pointers_outr=fifo_wr_pointers_ram[page_r];
     

x393_timing.xdc

@@ -69,16 +69,15 @@ create_clock -name axi_aclk -period 20 [get_nets -hierarchical *axi_aclk]
 ###create_generated_clock -name ddr3_mclk [get_nets */mclk_pre ]
 ###create_generated_clock -name ddr3_clk_ref [get_nets */clk_ref_pre]
 
-create_generated_clock -name ddr3_sdclk [get_nets -hierarchical sdclk_pre ]
-create_generated_clock -name ddr3_clk [get_nets -hierarchical clk_pre ]
-create_generated_clock -name ddr3_clk_div [get_nets -hierarchical clk_div_pre ]
-#create_generated_clock -name ddr3_mclk [get_nets -hierarchical mclk_pre ]
-create_generated_clock -name mcntrl393_i/memctrl16_i/mcontr_sequencer_i/phy_cmd_i/phy_top_i/mclk
-create_generated_clock -name ddr3_clk_ref [get_nets -hierarchical clk_ref_pre ]
+####create_generated_clock -name ddr3_sdclk [get_nets -hierarchical sdclk_pre ]
+####create_generated_clock -name ddr3_clk [get_nets -hierarchical clk_pre ]
+####create_generated_clock -name ddr3_clk_div [get_nets -hierarchical clk_div_pre ]
+####create_generated_clock -name ddr3_mclk [get_nets -hierarchical mclk_pre]
+####create_generated_clock -name ddr3_clk_ref [get_nets -hierarchical clk_ref_pre ]
 
 
 
 # do not check timing between axi_aclk and other clocks. Code should provide correct asynchronous crossing of the clock boundary.
-set_clock_groups -name ps_async_clock -asynchronous -group {axi_aclk}
+####set_clock_groups -name ps_async_clock -asynchronous -group {axi_aclk}
 # do not check timing between clk_axihp_pre and other clocks. Code should provide correct asynchronous crossing of the clock boundary.
-set_clock_groups -name ps_async_clock_axihp -asynchronous -group {clk_axihp_pre}
+####set_clock_groups -name ps_async_clock_axihp -asynchronous -group {clk_axihp_pre}