Skip to content

X
x393
Commit 4bb4f227 authored by Andrey Filippov's avatar Andrey Filippov
Browse files
Options

channels/compressor synchronization

parent 51d9d5ad
Show whitespace changes
Inline Side-by-side
Showing with 643 additions and 84 deletions
cocotb/x393_cocotb_02.sav
View file @ 4bb4f227
[*]
[*] GTKWave Analyzer v3.3.66 (w)1999-2015 BSI
[*] Sun Sep 4 16:43:07 2016
[*] Tue Sep 6 05:52:12 2016
[*]
[dumpfile] "/home/eyesis/git/x393-neon/simulation/x393_dut-20160903141950280.fst"
[dumpfile_mtime] "Sat Sep 3 20:58:57 2016"
[dumpfile_size] 219266337
[dumpfile] "/home/eyesis/git/x393-neon/simulation/x393_dut-20160905230400021.fst"
[dumpfile_mtime] "Tue Sep 6 05:45:49 2016"
[dumpfile_size] 211215977
[savefile] "/home/eyesis/git/x393-neon/cocotb/x393_cocotb_02.sav"
[timestart] 0
[size] 1836 1171
[pos] 1920 23
*-25.534578 177517388 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
*-25.560389 111820833 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
[treeopen] x393_dut.
[treeopen] x393_dut.ddr3_i.ddr3_i.
[treeopen] x393_dut.simul_axi_master_wdata_i.
......@@ -23,6 +23,7 @@
[treeopen] x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_pixel_buf_iface_i.
[treeopen] x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_status_i.
[treeopen] x393_dut.x393_i.compressor393_i.cmprs_channel_block[1].
[treeopen] x393_dut.x393_i.compressor393_i.cmprs_channel_block[1].jp_channel_i.
[treeopen] x393_dut.x393_i.compressor393_i.cmprs_channel_block[1].jp_channel_i.cmprs_pixel_buf_iface_i.
[treeopen] x393_dut.x393_i.compressor393_i.cmprs_channel_block[2].jp_channel_i.
[treeopen] x393_dut.x393_i.compressor393_i.cmprs_channel_block[2].jp_channel_i.cmprs_pixel_buf_iface_i.
......@@ -35,6 +36,7 @@
[treeopen] x393_dut.x393_i.frame_sequencer_block[0].
[treeopen] x393_dut.x393_i.frame_sequencer_block[0].cmd_frame_sequencer_i.
[treeopen] x393_dut.x393_i.mcntrl393_i.
[treeopen] x393_dut.x393_i.mcntrl393_i.memctrl16_i.
[treeopen] x393_dut.x393_i.mcntrl393_i.memctrl16_i.mcontr_sequencer_i.
[treeopen] x393_dut.x393_i.mcntrl393_i.memctrl16_i.mcontr_sequencer_i.phy_cmd_i.
[treeopen] x393_dut.x393_i.mcntrl393_i.memctrl16_i.mcontr_sequencer_i.phy_cmd_i.phy_top_i.
......@@ -42,6 +44,10 @@
[treeopen] x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].
[treeopen] x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.
[treeopen] x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.
[treeopen] x393_dut.x393_i.mcntrl393_i.sens_comp_block[1].
[treeopen] x393_dut.x393_i.mcntrl393_i.sens_comp_block[1].mcntrl_linear_wr_sensor_i.
[treeopen] x393_dut.x393_i.mcntrl393_i.sens_comp_block[2].
[treeopen] x393_dut.x393_i.mcntrl393_i.sens_comp_block[3].
[treeopen] x393_dut.x393_i.sensors393_i.
[treeopen] x393_dut.x393_i.sensors393_i.sensor_channel_block[0].
[treeopen] x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_channel_i.
......@@ -51,8 +57,8 @@
[treeopen] x393_dut.x393_i.sensors393_i.sensor_channel_block[2].
[treeopen] x393_dut.x393_i.sensors393_i.sensor_channel_block[3].
[treeopen] x393_dut.x393_i.timing393_i.
[sst_width] 251
[signals_width] 293
[sst_width] 272
[signals_width] 287
[sst_expanded] 1
[sst_vpaned_height] 641
@820
......@@ -531,6 +537,310 @@ x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_membuf_i.wpage[1:0]
-all_par_hispi
@800200
-compressor_0
-linear
@28
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.set_mode_w
@22
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.mode_reg[12:0]
@28
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.frame_start_late
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.frame_start_pending
@c00022
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.frame_start_pending_long[1:0]
@28
(0)x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.frame_start_pending_long[1:0]
(1)x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.frame_start_pending_long[1:0]
@1401200
-group_end
@28
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.frame_start_delayed
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.frame_start_mod
@8022
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.frame_start_r[4:0]
@28
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.chn_en
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.repeat_frames
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.frame_en
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.frame_run
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.frame_start
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.frame_finished
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.frame_done
@22
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.line_start_addr[21:0]
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.next_frame_start_addr[21:0]
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.start_range_addr[21:0]
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.start_addr[21:0]
@28
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.mclk
@22
x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_channel_i.dout_r[15:0]
@28
x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_channel_i.dout_valid
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.xfer_want
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.xfer_grant
@22
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.start_range_addr[21:0]
@200
-other channels below
@22
x393_dut.x393_i.mcntrl393_i.sens_comp_block[1].mcntrl_linear_wr_sensor_i.start_addr[21:0]
x393_dut.x393_i.mcntrl393_i.sens_comp_block[2].mcntrl_linear_wr_sensor_i.start_addr[21:0]
x393_dut.x393_i.mcntrl393_i.sens_comp_block[3].mcntrl_linear_wr_sensor_i.start_addr[21:0]
x393_dut.x393_i.mcntrl393_i.sens_comp_block[1].mcntrl_linear_wr_sensor_i.start_range_addr[21:0]
x393_dut.x393_i.mcntrl393_i.sens_comp_block[2].mcntrl_linear_wr_sensor_i.start_range_addr[21:0]
x393_dut.x393_i.mcntrl393_i.sens_comp_block[3].mcntrl_linear_wr_sensor_i.start_range_addr[21:0]
@800200
-membuf
@28
x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_membuf_i.frame_run_mclk
x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_membuf_i.frame_run_pclk
@22
x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_membuf_i.px_data[15:0]
@28
x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_membuf_i.px_valid
x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_membuf_i.page_written
x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_membuf_i.rpage_set
x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_membuf_i.rpage_next
x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_membuf_i.buf_rd
@22
x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_membuf_i.buf_dout[63:0]
@200
-channels 3-2-1 below
@28
x393_dut.x393_i.sensors393_i.sensor_channel_block[3].sensor_membuf_i.buf_rd
@22
x393_dut.x393_i.sensors393_i.sensor_channel_block[3].sensor_membuf_i.buf_dout[63:0]
@28
x393_dut.x393_i.sensors393_i.sensor_channel_block[2].sensor_membuf_i.buf_rd
@22
x393_dut.x393_i.sensors393_i.sensor_channel_block[2].sensor_membuf_i.buf_dout[63:0]
@28
x393_dut.x393_i.sensors393_i.sensor_channel_block[1].sensor_membuf_i.buf_rd
@22
x393_dut.x393_i.sensors393_i.sensor_channel_block[1].sensor_membuf_i.buf_dout[63:0]
@200
-channel1 below
@28
x393_dut.x393_i.compressor393_i.cmprs_channel_block[1].jp_channel_i.buf_we
@22
x393_dut.x393_i.compressor393_i.cmprs_channel_block[1].jp_channel_i.buf_din[63:0]
@200
-
@1000200
-membuf
-linear
@200
-
@800200
-tile
@28
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.set_mode_w
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.chn_en
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.repeat_frames
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.frame_en
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.frame_start
@8022
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.frame_start_r[4:0]
@28
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.frame_finished
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.frame_done
@22
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.line_start_addr[21:0]
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.next_frame_start_addr[21:0]
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.start_range_addr[21:0]
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.start_addr[21:0]
@28
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.xfer_page_rst_rd
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.xfer_want
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.xfer_grant
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.xfer_start32_rd
@22
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.xfer_row[14:0]
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.xfer_col[6:0]
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.rowcol_inc[13:0]
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.num_cols_m1[5:0]
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.num_rows_m1[5:0]
@1000200
-tile
@c00200
-sdram
@28
x393_dut.x393_i.mcntrl393_i.memctrl16_i.grant
@22
x393_dut.x393_i.mcntrl393_i.memctrl16_i.grant_chn[3:0]
@28
x393_dut.ddr3_i.SDRAS
x393_dut.ddr3_i.SDCAS
x393_dut.ddr3_i.SDWE
x393_dut.ddr3_i.SDBA[2:0]
@22
x393_dut.ddr3_i.SDA[14:0]
x393_dut.ddr3_i.SDA_D[14:0]
@200
-
@1401200
-sdram
@28
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_en_mclk
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_run_mclk
@200
-
@800200
-cmprs_macroblock
@28
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.cmprs_run_xclk
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.frame_en_r
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.first_mb
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.last_mb
(7)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start[8:0]
@22
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start[8:0]
@28
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.frame_que_cntr[2:0]
@800028
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.frame_finish_r[1:0]
@28
(0)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.frame_finish_r[1:0]
(1)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.frame_finish_r[1:0]
@1001200
-group_end
@28
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.frame_finish_w
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.frames_pending
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_done_w
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start_w
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.frame_go
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.frame_start_xclk_r
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.frame_en
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.frame_pre_run
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.starting
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.frame_pre_start_w
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.frame_pre_start_r
@22
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_rows_left[12:0]
@28
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_last_row
@800022
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start[8:0]
@28
(0)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start[8:0]
(1)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start[8:0]
(2)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start[8:0]
(3)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start[8:0]
(4)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start[8:0]
(5)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start[8:0]
(6)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start[8:0]
(7)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start[8:0]
(8)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start[8:0]
@1001200
-group_end
@28
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.first_mb
@22
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.dct_pipeline_delay_cntr[5:0]
@200
-
@1000200
-cmprs_macroblock
@c00023
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mbl_x_last_r[7:3]
@28
(0)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mbl_x_last_r[7:3]
(1)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mbl_x_last_r[7:3]
(2)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mbl_x_last_r[7:3]
(3)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mbl_x_last_r[7:3]
(4)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mbl_x_last_r[7:3]
@1401201
-group_end
@28
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.reset_page_rd
@22
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.next_valid[2:0]
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.next_invalid[2:0]
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.needed_page[2:0]
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.buf_diff[2:0]
@28
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.buf_ready_w
@c00022
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start[8:0]
@28
(0)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start[8:0]
(1)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start[8:0]
(2)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start[8:0]
(3)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start[8:0]
(4)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start[8:0]
(5)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start[8:0]
(6)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start[8:0]
(7)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start[8:0]
(8)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start[8:0]
@1401200
-group_end
@28
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.mb_pre_start
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_pixel_buf_iface_i.mb_pre_start
@22
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_pixel_buf_iface_i.period_cntr[8:0]
@28
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.mb_pre_end
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.frame_en_r
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_end_in
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start_w
@8022
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_macroblock_buf_iface_i.mb_pre_start[8:0]
@28
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.mb_pre_start
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.first_mb
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.frame_started
x393_dut.x393_i.sensors393_i.sensor_channel_block[0].sensor_channel_i.gamma_bayer[1:0]
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.bayer_phase[1:0]
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.frames_in_sync
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.next_page_chn
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.page_ready_chn
@8028
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.buf_we
@22
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.buf_din[63:0]
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.buf_pxd[7:0]
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.buf_ra[11:0]
@28
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.buf_rd[1:0]
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.fifo_ren
@22
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.fifo_rdata[63:0]
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.line_unfinished[15:0]
@c00022
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.frame_start_dst_r[5:0]
@28
(0)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.frame_start_dst_r[5:0]
(1)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.frame_start_dst_r[5:0]
(2)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.frame_start_dst_r[5:0]
(3)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.frame_start_dst_r[5:0]
(4)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.frame_start_dst_r[5:0]
(5)x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.frame_start_dst_r[5:0]
@1401200
-group_end
@28
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.master_set
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.vsync_late
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.frame_start_pend_r
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.frame_started
@22
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.line_unfinished_src[15:0]
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.line_unfinished[15:0]
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.frame_number_src[15:0]
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.frame_number[15:0]
@28
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.frame_done
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.reading_frame
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.frame_start_dst
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.line_numbers_sync
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.cmprs_en
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.cmprs_run
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.frame_done_src
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.suspend_end
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.suspend
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.frames_numbers_differ
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_frame_sync_i.frames_differ
@22
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.frame_number_src[15:0]
x393_dut.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.frame_number_dst[15:0]
......@@ -636,6 +946,7 @@ x393_dut.simul_axi_hp1_wr_i.sim_wr_valid
-compressor_0
@800200
-follow_master
@c00200
-scanline_linear
@28
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.xfer_page_rst_wr
......@@ -649,15 +960,17 @@ x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.frame_n
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.frame_number[15:0]
@200
-
@1000200
@1401200
-scanline_linear
@800200
-mcntrl_tiled
@28
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.frame_start
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.frame_done
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.frames_in_sync
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.xfer_page_rst_rd
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.buf_reset_pend
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.frame_master_pend
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.frame_start
@22
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.frame_start_r[4:0]
@28
......@@ -701,6 +1014,16 @@ x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.mode
(11)x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.mode_reg[11:0]
@1401200
-group_end
@28
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.chn_en
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.pre_want
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.master_set
@22
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.frame_number[15:0]
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.line_unfinished[15:0]
@28
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.suspend
x393_dut.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_tiled_rd_compressor_i.xfer_want
@200
-
@1000200
......
compressor_jp/cmprs_frame_sync.v
View file @ 4bb4f227
......@@ -76,6 +76,7 @@ module cmprs_frame_sync#(
input [FRAME_HEIGHT_BITS-1:0] line_unfinished, // number of the current (unfinished ) line in this (compressor) channel
input [LAST_FRAME_BITS-1:0] frame_number, // current frame number (for multi-frame ranges) in this (compressor channel
input frames_in_sync, // frame number in destination memory channel is valid for bonded mode
input frame_done, // input - single-cycle pulse when the full frame (window) was transferred to/from DDR3 memory
output reg suspend, // suspend reading data for this channel - waiting for the source data
......@@ -91,11 +92,15 @@ module cmprs_frame_sync#(
a) "broken frame" - attempted to start a new frame before previous one was completely read from the memory
b) turned off enable while frame was being compressed
Abort frame lasts until flush end or timeout expire
TODO: Simplify logic: instead of frame_start_pend_r - copy frame_number_srtc @ vsync_late, and start frame if it is not reading,
in "run" mode, and frame_number_differ (in multi-frame mode)
*/
// wire vsync_late_mclk; // single mclk cycle, reclocked from vsync_late
// wire frame_started_mclk;
reg bonded_mode;
reg [3:0] frame_start_dst_r;
reg [5:0] frame_start_dst_r;
reg frame_start_pend_r; // postpone frame_start_dst if previous frame was still being read during vsync_late
reg frames_differ; // src and dest point to different frames (single-frame buffer mode), disregard line_unfinished_*
reg frames_numbers_differ; // src and dest point to different frames (multi-frame buffer mode), disregard line_unfinished_*
......@@ -108,7 +113,7 @@ module cmprs_frame_sync#(
reg [CMPRS_TIMEOUT_BITS-1:0] timeout;
reg cmprs_en_extend_r=0;
reg cmprs_en_d;
reg suspend_end; // suspend at teh end of the current frame until frame number changes
reg suspend_end; // suspend at the end of the current frame until frame number changes
// reg cmprs_en_xclk;
assign frame_start_dst = frame_start_dst_r[0];
assign cmprs_en_extend = cmprs_en_extend_r;
......@@ -146,19 +151,25 @@ module cmprs_frame_sync#(
if (!cmprs_en || frame_done ) reading_frame_r <= 0;
else if (frame_started_mclk) reading_frame_r <= 1;
if (!cmprs_en) frame_start_pend_r <= 0;
else if (cmprs_run && vsync_late && reading_frame_r) frame_start_pend_r <= 1;
else if (frame_start_dst_r[0]) frame_start_pend_r <= 0;
if (!cmprs_en) suspend_end <= 0;
// if (!cmprs_en || frame_start_dst_r[0]) frame_start_pend_r <= 0;
if (!cmprs_run || frame_start_dst_r[0]) frame_start_pend_r <= 0;
// else if (cmprs_run && vsync_late && reading_frame_r) frame_start_pend_r <= 1;
else if ((cmprs_run && vsync_late && reading_frame_r) ||
(frame_start_dst_r[5] && bonded_mode && frames_numbers_differ)) frame_start_pend_r <= 1;
// else if (frame_start_dst_r[0]) frame_start_pend_r <= 0;
// If started frame differs from tghe source one, needs to comrfess next frame after this is done, without vsync_late
// else if (frame_start_dst_r[5] ) frame_start_pend_r <= bonded_mode && frames_numbers_differ;
// if (!cmprs_en) suspend_end <= 0;
if (!cmprs_run) suspend_end <= 0;
else if (frame_done) suspend_end <= 1;
else if (frame_start_dst_r[3]) suspend_end <= 0;
frame_start_dst_r[0] <= cmprs_en && (cmprs_run ?
((vsync_late && !reading_frame_r) || (frame_start_pend_r && frame_done)):
cmprs_standalone);
if (!cmprs_en) frame_start_dst_r[3:1] <=0;
else frame_start_dst_r[3:1] <= frame_start_dst_r[2:0];
if (!cmprs_en) frame_start_dst_r[5:1] <=0;
else frame_start_dst_r[5:1] <= frame_start_dst_r[4:0];
if (!cmprs_en) bonded_mode <= 0;
else if (cmprs_run) bonded_mode <= 1;
......@@ -171,8 +182,7 @@ module cmprs_frame_sync#(
line_numbers_sync <= (line_unfinished_src > line_unfinished);
suspend <= bonded_mode && !((sigle_frame_buf ? frames_differ : frames_numbers_differ) || line_numbers_sync);
suspend <= bonded_mode && (!frames_in_sync || !((sigle_frame_buf ? frames_differ : frames_numbers_differ) || line_numbers_sync));
end
......
compressor_jp/cmprs_macroblock_buf_iface.v
View file @ 4bb4f227
......@@ -42,11 +42,12 @@
module cmprs_macroblock_buf_iface #(
`ifdef USE_OLD_DCT
parameter DCT_PIPELINE_PAUSE = 0 // No need to delay
parameter DCT_PIPELINE_PAUSE = 0, // No need to delay
`else
parameter DCT_PIPELINE_PAUSE = 48 // TODO: find really required value (minimal), adjust counter bits (now 6)
parameter DCT_PIPELINE_PAUSE = 48, // TODO: find really required value (minimal), adjust counter bits (now 6)
// 48 seems to be OK (may be less)
`endif
parameter FRAME_QUEUE_WIDTH = 2
)(
// input rst,
input xclk, // global clock input, compressor single clock rate
......@@ -64,6 +65,7 @@ module cmprs_macroblock_buf_iface #(
input frame_start_xclk, // frame parameters are valid after this pulse
input frame_go, // start frame: if idle, will start reading data (if available),
// if running - will not restart a new frame if 0.
input cmprs_run_mclk, // 0 - off or stopping, reset frame_pre_run
input [ 4:0] left_marg, // left margin (for not-yet-implemented) mono JPEG (8 lines tile row) can need 7 bits (mod 32 - tile)
input [12:0] n_blocks_in_row_m1, // number of macroblocks in a macroblock row minus 1
input [12:0] n_block_rows_m1, // number of macroblock rows in a frame minus 1
......@@ -125,10 +127,22 @@ module cmprs_macroblock_buf_iface #(
reg frame_pre_run;
// reg [1:0] frame_may_start;
reg frame_start_xclk_r; // next cycle after frame_start_xclk
reg cmprs_run_xclk;
reg [5:0] dct_pipeline_delay_cntr;
reg [FRAME_QUEUE_WIDTH:0] frame_que_cntr; // width+1
reg [1:0] frame_finish_r; // active after last macroblock in a frame
wire mb_done_w;
wire frame_finish_w;
wire frames_pending;
// assign mb_done = mb_pre_start[1] && last_mb; // mb_pre_end_in && last_mb;
assign mb_done_w = mb_pre_start[1] && last_mb; // mb_pre_end_in && last_mb;
// assign mb_done_w = first_mb && (dct_pipeline_delay_cntr == 1);
assign frame_finish_w = frame_finish_r[1] && !frame_finish_r[0];
assign frames_pending = !frame_que_cntr[FRAME_QUEUE_WIDTH] && (|frame_que_cntr[FRAME_QUEUE_WIDTH-1:0]);
`ifdef DEBUG_RING
assign dbg_add_invalid = add_invalid;
assign dbg_mb_release_buf = mb_release_buf;
......@@ -150,8 +164,11 @@ module cmprs_macroblock_buf_iface #(
((frame_may_start==2'b1) && !frame_pre_run && !starting);
assign frame_pre_start_w = frame_may_start[0] && ((mb_pre_end_in && last_mb) || (!frame_pre_run && !frame_may_start[1] && !starting));
*/
// one extra at the end of frame is needed (sequence will be short)
assign mb_pre_start_w = mb_pre_end_in || (frame_start_xclk_r && !frame_pre_run && !starting);
assign frame_pre_start_w = (mb_pre_end_in && last_mb) || (frame_start_xclk_r && !frame_pre_run && !starting);
// assign frame_pre_start_w = (mb_pre_end_in && last_mb) || (frame_start_xclk_r && !frame_pre_run && !starting);
assign frame_pre_start_w = (frames_pending && frame_finish_w) || (frame_start_xclk_r && !frame_pre_run && !starting);
//frame_start_xclk_r
assign start_page = next_invalid[1:0]; // oldest page needed for this macroblock
always @ (posedge xclk) begin
......@@ -173,10 +190,11 @@ module cmprs_macroblock_buf_iface #(
else if (frame_pre_start_r) mb_first_in_row <= 1;
else if (mb_pre_start[0]) mb_first_in_row <= mb_last_in_row;
cmprs_run_xclk <=cmprs_run_mclk;
if (!frame_en) frame_pre_run <= 0;
if (!frame_en || (!frames_pending && frame_finish_w)) frame_pre_run <= 0;
else if (mb_pre_start_w) frame_pre_run <= 1;
else if (mb_pre_end_in && last_mb) frame_pre_run <= 0;
// else if (mb_pre_end_in && last_mb) frame_pre_run <= 0;
if (frame_pre_start_r) mb_rows_left <= n_block_rows_m1;
else if (mb_pre_start[0] && mb_last_in_row) mb_rows_left <= mb_rows_left - 1;
......@@ -184,9 +202,11 @@ module cmprs_macroblock_buf_iface #(
if (frame_pre_start_r || (mb_pre_start[0] && mb_last_in_row)) mb_cols_left <= n_blocks_in_row_m1;
else if (mb_pre_start[0]) mb_cols_left <= mb_cols_left - 1;
if (mb_pre_start[1]) mb_last_row <= (mb_rows_left == 0);
if (frame_pre_start_r) mb_last_row <= 0;
else if (mb_pre_start[1]) mb_last_row <= (mb_rows_left == 0);
if (mb_pre_start[1]) mb_last_in_row <= (mb_cols_left == 0);
if (frame_pre_start_r) mb_last_in_row <= 0;
else if (mb_pre_start[1]) mb_last_in_row <= (mb_cols_left == 0);
if (!frame_en || mb_pre_start[1]) pre_first_mb <= 0;
else if (frame_pre_start_r) pre_first_mb <= 1;
......@@ -203,18 +223,35 @@ module cmprs_macroblock_buf_iface #(
// TODO: Here enforce minimal pause (if not zero for the DCT pipeline to recover
// will wait for buf_ready_w, but not less than DCT_PIPELINE_PAUSE (or no wait at all)
mb_pre_start4_first <=mb_pre_start[3];
if (!frame_en) frame_finish_r[0] <= 0;
else if (mb_done_w) frame_finish_r[0] <= 1;
else if (dct_pipeline_delay_cntr == 0) frame_finish_r[0] <= 0;
frame_finish_r[1] <= frame_finish_r[0];
if (xrst) dct_pipeline_delay_cntr <= 0;
else if (mb_pre_start4_first && !buf_ready_w) dct_pipeline_delay_cntr <= DCT_PIPELINE_PAUSE -1;
else if ((mb_pre_start4_first && !buf_ready_w) ||
mb_done_w) dct_pipeline_delay_cntr <= DCT_PIPELINE_PAUSE -1;
else if (|dct_pipeline_delay_cntr) dct_pipeline_delay_cntr <= dct_pipeline_delay_cntr -1;
if (!frame_en_r) mb_pre_start <= 0;
if (mb_pre_start_w) mb_pre_start <= 1;
// if (!frame_en_r) mb_pre_start <= 0;
// if (!frame_en_r || (mb_pre_start[1] && last_mb)) mb_pre_start <= 0;
if (!frame_en_r || (mb_pre_start[3] && frame_finish_r[0])) mb_pre_start <= 0; // so needed page is updated
else if (mb_pre_start_w) mb_pre_start <= 1;
// if (mb_pre_start_w && ! last_mb) mb_pre_start <= 1;
else if (!mb_pre_start[4] || (buf_ready_w && !(|dct_pipeline_delay_cntr))) mb_pre_start <= mb_pre_start << 1;
if (!cmprs_run_xclk) frame_que_cntr <= 0;
else if ( frame_start_xclk_r && !frame_pre_start_r) frame_que_cntr <= frame_que_cntr + 1;
else if (!frame_start_xclk_r && frame_pre_start_r) frame_que_cntr <= frame_que_cntr - 1;
if (mb_pre_start[1]) mbl_x_r[6:3] <= mb_first_in_row? {2'b0,left_marg[4:3]} : mbl_x_next_r[6:3];
if (mb_pre_start[2]) mbl_x_last_r[7:3] <= {1'b0,mbl_x_r[6:3]} + {2'b0,mb_w_m1[5:3]};
if (mb_pre_start[3]) begin
if (reset_page_rd) needed_page[2:0] <= 0; // together with next_valid, next_invalid
else if (mb_pre_start[3]) begin
case (tile_width)
2'b00: needed_page[2:0] <= next_invalid[2:0]+{1'b0, mbl_x_last_r[5:4]};
2'b01: needed_page[2:0] <= next_invalid[2:0]+{1'b0, mbl_x_last_r[6:5]};
......
compressor_jp/compressor393.v
View file @ 4bb4f227
......@@ -176,6 +176,8 @@ module compressor393 # (
// Used withe a single-frame buffers
input [4*FRAME_HEIGHT_BITS-1:0] line_unfinished_dst,// number of the current (unfinished ) line in this (compressor) channel
input [4*LAST_FRAME_BITS-1:0] frame_number_dst, // current frame number (for multi-frame ranges) in this (compressor channel
input [3:0] frames_in_sync, // frame number in destination memory channel is valid for bonded mode
input [3:0]frame_done_dst, // single-cycle pulse when the full frame (window) was transferred to/from DDR3 memory
// use as 'eot_real' in 353
output [3:0]suspend, // suspend reading data for this channel - waiting for the source data
......@@ -441,6 +443,7 @@ module compressor393 # (
.frame_done_src (frame_done_src[i]), // input
.line_unfinished_dst (line_unfinished_dst[FRAME_HEIGHT_BITS * i +: FRAME_HEIGHT_BITS]), // input[15:0]
.frame_number_dst (frame_number_dst[LAST_FRAME_BITS * i +: LAST_FRAME_BITS]), // input[15:0]
.frames_in_sync (frames_in_sync[i]), //input
.frame_done_dst (frame_done_dst[i]), // input
.suspend (suspend[i]), // output
.frame_number_finished (frame_number_finished[LAST_FRAME_BITS * i +: LAST_FRAME_BITS]), // output reg[15:0]
......
compressor_jp/jp_channel.v
View file @ 4bb4f227
......@@ -163,6 +163,7 @@ module jp_channel#(
input [FRAME_HEIGHT_BITS-1:0] line_unfinished_dst,// number of the current (unfinished ) line in this (compressor) channel
input [LAST_FRAME_BITS-1:0] frame_number_dst, // current frame number (for multi-frame ranges) in this (compressor channel
input frames_in_sync, // frame number in destination memory channel is valid for bonded mode
input frame_done_dst, // single-cycle pulse when the full frame (window) was transferred to/from DDR3 memory
// use as 'eot_real' in 353
output suspend, // suspend reading data for this channel - waiting for the source data
......@@ -802,6 +803,7 @@ module jp_channel#(
// Used withe a single-frame buffers
.line_unfinished (line_unfinished_dst), // input[15:0] - number of the current (unfinished ) line in this (compressor) channel
.frame_number (frame_number_dst), // input[15:0] - current frame number (for multi-frame ranges) in this (compressor channel
.frames_in_sync (frames_in_sync), // frame number in destination memory channel is valid for bonded mode
.frame_done (frame_done_dst), // input - single-cycle pulse when the full frame (window) was transferred to/from DDR3 memory
.suspend (suspend), // output reg - suspend reading data for this channel - waiting for the source data
.stuffer_running (stuffer_running), // input
......@@ -823,6 +825,7 @@ module jp_channel#(
.frame_en (frame_en), // input
.frame_start_xclk (frame_start_xclk), // input@posedge xclk - parameters are copied @ this pulse
.frame_go (frame_go), // input - do not use - assign to frame_en? Running frames can be controlled by other means
.cmprs_run_mclk (cmprs_run_mclk), // input used to reset frame_pre_run (enable vsync_late for the new frame after stop)
.left_marg (left_marg), // input[4:0]
.n_blocks_in_row_m1 (n_blocks_in_row_m1), // input[12:0]
.n_block_rows_m1 (n_block_rows_m1), // input[12:0]
......
fpga_version.vh
View file @ 4bb4f227
......@@ -35,7 +35,12 @@
* contains all the components and scripts required to completely simulate it
* with at least one of the Free Software programs.
*/
parameter FPGA_VERSION = 32'h039300a9; // parallel, added copying maste-t-slave frame number -0.169(8 paths), 80.28%
parameter FPGA_VERSION = 32'h039300ae; // parallel, increasing sesnsor-channels maximal delays to 12 bits
// parameter FPGA_VERSION = 32'h039300ad; // parallel, resetting frame_pre_run. All met, 79.97%
// parameter FPGA_VERSION = 32'h039300ac; // parallel, adding reset needed_page in compressor -0.012 (2), 79.39%
// parameter FPGA_VERSION = 32'h039300ab; // parallel, more on frame sync in compressor All met, 79.04%
// parameter FPGA_VERSION = 32'h039300aa; // parallel, improving frame sync in compressor -0.036ns, 79.60%
// parameter FPGA_VERSION = 32'h039300a9; // parallel, added copying maste-t-slave frame number -0.169(8 paths), 80.28%
// parameter FPGA_VERSION = 32'h039300a8; // parallel, fixing BUG in command sequencer that was missing some commands 79.25%, all met
// parameter FPGA_VERSION = 32'h039300a7; // parallel, changing parameter to reset buffer pages at each frame start. 79.4%, -0.022 (2 paths)
// parameter FPGA_VERSION = 32'h039300a6; // parallel, adding frame sync delays to mcntrl_linear 79.26, mclk and xclk violated
......
includes/x393_parameters.vh
View file @ 4bb4f227
......@@ -299,7 +299,7 @@
parameter MCONTR_LINTILE_SKIP_LATE = 12, // skip actual R/W operation when it is too late, advance pointers
parameter MCONTR_LINTILE_COPY_FRAME = 13, // copy frame number from the master channel (single event, not a persistent mode)
parameter MCNTRL_SCANLINE_DLY_WIDTH = 7, // delay start pulse by 1..64 mclk
parameter MCNTRL_SCANLINE_DLY_WIDTH = 12, // delay start pulse by 1..64 mclk
parameter MCNTRL_SCANLINE_DLY_DEFAULT = 63, // initial delay value for start pulse
// Channel test module parameters
......
memctrl/mcntrl393.v
View file @ 4bb4f227
......@@ -262,7 +262,7 @@ module mcntrl393 #(
parameter MCONTR_LINTILE_DIS_NEED = 11, // disable 'need' request
parameter MCONTR_LINTILE_SKIP_LATE = 12, // skip actual R/W operation when it is too late, advance pointers
parameter MCONTR_LINTILE_COPY_FRAME = 13, // copy frame number from the master channel (single event, not a persistent mode)
parameter MCNTRL_SCANLINE_DLY_WIDTH = 7, // delay start pulse by 1..64 mclk
parameter MCNTRL_SCANLINE_DLY_WIDTH = 12, // delay start pulse by 1..64 mclk
parameter MCNTRL_SCANLINE_DLY_DEFAULT = 63 // initial delay value for start pulse
) (
......@@ -350,6 +350,8 @@ module mcntrl393 #(
// Used withe a single-frame buffers
output [4*FRAME_HEIGHT_BITS-1:0] cmprs_line_unfinished_dst,// number of the current (unfinished ) line in this (compressor) channel
output [4*LAST_FRAME_BITS-1:0] cmprs_frame_number_dst, // current frame number (for multi-frame ranges) in this (compressor channel
output [3:0] cmprs_frames_in_sync, // cmprs_frame_number_dst is valid (in bonded mode)
output [3:0] cmprs_frame_done_dst, // single-cycle pulse when the full frame (window) was transferred to/from DDR3 memory
// use as 'eot_real' in 353
input [3:0] cmprs_suspend, // suspend reading data for this channel - waiting for the source data
......@@ -1205,6 +1207,7 @@ module mcntrl393 #(
.line_unfinished (cmprs_line_unfinished_dst[i * FRAME_HEIGHT_BITS +: FRAME_HEIGHT_BITS]), // output[15:0]
.suspend (cmprs_suspend[i]), // input
.frame_number (cmprs_frame_number_dst[i * LAST_FRAME_BITS +: LAST_FRAME_BITS]), // output[15:0]
.frames_in_sync (cmprs_frames_in_sync[i]), // output
.master_frame (cmprs_frame_number_src[i * LAST_FRAME_BITS +: LAST_FRAME_BITS]), // input[15:0]
.master_set (sens_frame_set[i]), // input
// .master_follow (master_follow[i]), // input
......@@ -1431,6 +1434,7 @@ module mcntrl393 #(
.line_unfinished (line_unfinished_chn2), // output[15:0]
.suspend (suspend_chn2), // input
.frame_number (frame_number_chn2),
.frames_in_sync(), // output
.master_frame (16'b0), // input[15:0]
.master_set (1'b0), // input
// .master_follow (1'b0), // input
......@@ -1502,6 +1506,7 @@ module mcntrl393 #(
.line_unfinished (line_unfinished_chn4), // output[15:0]
.suspend (suspend_chn4), // input
.frame_number (frame_number_chn4), // output [15:0]
.frames_in_sync (), // output
.master_frame (16'b0), // input[15:0]
.master_set (1'b0), // input
// .master_follow (1'b0), // input
......
memctrl/mcntrl_linear_rw.v
View file @ 4bb4f227
......@@ -82,7 +82,7 @@ module mcntrl_linear_rw #(
// TODO NC393: This delay may be too long for serail sensors. Make them always start to fill the
// first buffer page, waiting for the request from mcntrl_linear during that first page. And if it will arrive -
// just continue.
parameter MCNTRL_SCANLINE_DLY_WIDTH = 7, // delay start pulse by 1..64 mclk
parameter MCNTRL_SCANLINE_DLY_WIDTH = 12, // delay start pulse by 1..64 mclk
parameter MCNTRL_SCANLINE_DLY_DEFAULT = 63 // initial delay value for start pulse
)(
input mrst,
......@@ -257,12 +257,12 @@ module mcntrl_linear_rw #(
reg [FRAME_HEIGHT_BITS-1:0] start_y; // (programmed) normally 0, copied to curr_y on frame_start_late
reg xfer_done_d; // xfer_done delayed by 1 cycle (also includes xfer_skipped)
reg [MCNTRL_SCANLINE_DLY_WIDTH-1:0] start_delay; // how much to delay frame start
wire frame_start_late;
reg [MCNTRL_SCANLINE_DLY_WIDTH:0] start_delay_cntr = {MCNTRL_SCANLINE_DLY_WIDTH+1{1'b1}}; // start delay counter
reg frame_start_late;
wire set_start_delay_w;
reg buf_reset_pend; // reset buffer page at next (late)frame sync (compressor should be disabled
// if total number of pages in a frame is not multiple of 4
assign frame_number = frame_number_current;
assign set_mode_w = cmd_we && (cmd_a== MCNTRL_SCANLINE_MODE);
......@@ -290,12 +290,13 @@ module mcntrl_linear_rw #(
else single_frame_r <= single_frame_w;
if (mrst) rst_frame_num_r <= 0;
else rst_frame_num_r <= {rst_frame_num_r[0],
rst_frame_num_w |
else rst_frame_num_r <= {rst_frame_num_r[0], rst_frame_num_w }; // now only at specific command
/*
|
set_start_addr_w |
set_last_frame_w |
set_frame_size_w};
*/
if (mrst) start_range_addr <= 0;
else if (set_start_addr_w) start_range_addr <= cmd_data[NUM_RC_BURST_BITS-1:0];
......@@ -315,13 +316,14 @@ module mcntrl_linear_rw #(
// if (mrst) frame_start_r <= 0;
// else frame_start_r <= {frame_start_r[3:0], frame_start_late & frame_en};
if (mrst) frame_en <= 0;
// if (mrst) frame_en <= 0;
if (!chn_en) frame_en <= 0;
else if (single_frame_r || repeat_frames) frame_en <= 1;
else if (frame_start_late) frame_en <= 0;
// will reset buffer page at next frame start
if (mrst ||frame_start_r[0]) buf_reset_pend <= 0;
else if (rst_frame_num_r) buf_reset_pend <= 1;
else if (rst_frame_num_r[0]) buf_reset_pend <= 1;
if (mrst) frame_number_cntr <= 0;
else if (rst_frame_num_r[0]) frame_number_cntr <= 0;
......@@ -365,6 +367,14 @@ module mcntrl_linear_rw #(
if (mrst) start_delay <= MCNTRL_SCANLINE_DLY_DEFAULT;
else if (set_start_delay_w) start_delay <= cmd_data[MCNTRL_SCANLINE_DLY_WIDTH-1:0];
if (mrst) start_delay_cntr <= {MCNTRL_SCANLINE_DLY_WIDTH+1{1'b1}};
else if (frame_start) start_delay_cntr <= {1'b0, start_delay};
else if (!start_delay_cntr[MCNTRL_SCANLINE_DLY_WIDTH]) start_delay_cntr <= start_delay_cntr - 1;
frame_start_late <= start_delay_cntr == 0;
//
end
assign mul_rslt_w= frame_y8_r * frame_full_width_r; // 5 MSBs will be discarded
assign xfer_num128= xfer_num128_r[NUM_XFER_BITS-1:0];
......@@ -694,17 +704,5 @@ wire start_not_partial= xfer_start_r[0] && !xfer_limited_by_mem_page_r;
.rq (status_rq), // output
.start (status_start) // input
);
dly_var #(
.WIDTH (1),
.DLY_WIDTH (MCNTRL_SCANLINE_DLY_WIDTH)
) frame_start_late_i (
.clk (mclk), // input
.rst (mrst), // input
.dly (start_delay), // input[0:0]
.din (frame_start), // input[0:0]
.dout (frame_start_late) // output[0:0]
);
endmodule
memctrl/mcntrl_tiled_rw.v
View file @ 4bb4f227
......@@ -105,6 +105,7 @@ module mcntrl_tiled_rw#(
output [FRAME_HEIGHT_BITS-1:0] line_unfinished, // number of the current (unfinished ) line, RELATIVE TO FRAME, NOT WINDOW.
input suspend, // suspend transfers (from external line number comparator)
output [LAST_FRAME_BITS-1:0] frame_number, // current frame number (for multi-frame ranges)
output frames_in_sync, // frame number valid for bonded mode
input [LAST_FRAME_BITS-1:0] master_frame, // current frame number of a master channel
input master_set, // master frame number set (1-st cycle when new value is valid)
// input master_follow, // copy master frame number instead of reset @master_set, 0 - ignore master_set
......@@ -272,7 +273,9 @@ module mcntrl_tiled_rw#(
reg set_frame_from_master; // single-clock copy frame counter from the master channel
reg buf_reset_pend; // reset buffer page at next (late)frame sync (compressor should be disabled
// if total number of pages in a frame is not multiple of 4
reg frames_in_sync_r;
assign frames_in_sync = frames_in_sync_r;
assign frame_number = frame_number_current;
assign set_mode_w = cmd_we && (cmd_a== MCNTRL_TILED_MODE);
......@@ -300,11 +303,11 @@ module mcntrl_tiled_rw#(
else single_frame_r <= single_frame_w;
if (mrst) rst_frame_num_r <= 0;
else rst_frame_num_r <= {rst_frame_num_r[0],
rst_frame_num_w |
set_start_addr_w |
set_last_frame_w |
set_frame_size_w};
else rst_frame_num_r <= {rst_frame_num_r[0], rst_frame_num_w}; // resetting only at specific command
//|
// set_start_addr_w |
// set_last_frame_w |
// set_frame_size_w};
if (mrst) start_range_addr <= 0;
else if (set_start_addr_w) start_range_addr <= cmd_data[NUM_RC_BURST_BITS-1:0];
......@@ -325,16 +328,23 @@ module mcntrl_tiled_rw#(
if (mrst) frame_start_r <= 0;
else frame_start_r <= {frame_start_r[3:0], frame_start & frame_en};
if (mrst) frame_en <= 0;
// if (mrst) frame_en <= 0;
if (!chn_en) frame_en <= 0;
else if (single_frame_r || repeat_frames) frame_en <= 1;
else if (frame_start) frame_en <= 0;
if (mrst ||master_set) frame_master_pend <= 0;
else if (set_copy_frame_num_w) frame_master_pend <= 1;
// after channel was disabled frame number reported is incorrect, until updated by master_set
// Without this signal compressor was reading data between the time source frame number was updated and this one.
if (!chn_en) frames_in_sync_r <= 0;
// else if (frame_start_r[2]) frames_in_sync_r <= 1;
else if (frame_start_r[3]) frames_in_sync_r <= 1; // to match line_unfinished
// will reset buffer page at next frame start
if (mrst ||frame_start_r[0]) buf_reset_pend <= 0;
else if (rst_frame_num_r) buf_reset_pend <= 1;
else if (rst_frame_num_r[0]) buf_reset_pend <= 1;
set_frame_from_master <= master_set && frame_master_pend;
......
py393/x393_cmprs.py
View file @ 4bb4f227
......@@ -461,7 +461,7 @@ class X393Cmprs(object):
disable_need = disable_need,
repetitive= True,
single = False,
reset_frame = False,
reset_frame = True, # Now needed to propagate start address False,
byte32 = byte32,
keep_open = False,
extra_pages = extra_pages,
......
py393/x393_export_c.py
View file @ 4bb4f227
......@@ -1654,7 +1654,7 @@ class X393ExportC(object):
dw.append(("extra_pages", vrlg.MCONTR_LINTILE_EXTRAPG, vrlg.MCONTR_LINTILE_EXTRAPG_BITS,0, "2-bit number of extra pages that need to stay (not to be overwritten) in the buffer"))
dw.append(("keep_open", vrlg.MCONTR_LINTILE_KEEP_OPEN,1,0, "for 8 or less rows - do not close page between accesses (not used in scanline mode)"))
dw.append(("byte32", vrlg.MCONTR_LINTILE_BYTE32,1,1, "32-byte columns (0 - 16-byte), not used in scanline mode"))
dw.append(("reset_frame", vrlg.MCONTR_LINTILE_RST_FRAME,1,0, "reset frame number (also resets buffer at next frame start)"))
dw.append(("reset_frame", vrlg.MCONTR_LINTILE_RST_FRAME,1,0, "reset frame number (also resets buffer at next frame start). NEEDED after initial set up to propagate start address!"))
dw.append(("single", vrlg.MCONTR_LINTILE_SINGLE,1,0, "run single frame"))
dw.append(("repetitive", vrlg.MCONTR_LINTILE_REPEAT,1,1, "run repetitive frames"))
dw.append(("disable_need", vrlg.MCONTR_LINTILE_DIS_NEED,1,0, "disable 'need' generation, only 'want' (compressor channels)"))
......
py393/x393_jpeg.py
View file @ 4bb4f227
......@@ -1429,11 +1429,11 @@ write_cmd_frame_sequencer 0 0 2 0x700 0x600
write_cmd_frame_sequencer 0 0 2 0x700 0x900
#stop compressor memory @2, restart @3 and copy frame number # Better to turn off compressor before resetting memory channel
write_cmd_frame_sequencer 0 1 2 0x600 0x5 # stop compressor
#write_cmd_frame_sequencer 0 1 2 0x6c0 0x1c49 # enable off
#write_cmd_frame_sequencer 0 1 3 0x6c0 0x3c4b # enable on, copy frame
#write_cmd_frame_sequencer 0 1 3 0x6c0 0x3d4b # enable on, copy frame, reset buffer
write_cmd_frame_sequencer 0 1 3 0x600 0x7 # run compressor (after memory?)
write_cmd_frame_sequencer 0 1 3 0x600 0x5 # stop compressor
#write_cmd_frame_sequencer 0 1 3 0x6c0 0x1c49 # enable off
#write_cmd_frame_sequencer 0 1 4 0x6c0 0x3c4b # enable on, copy frame
#write_cmd_frame_sequencer 0 1 4 0x6c0 0x3d4b # enable on, copy frame, reset buffer
write_cmd_frame_sequencer 0 1 4 0x600 0x7 # run compressor (after memory?)
#set_sensor_io_dly_hispi all 0x48 0x68 0x68 0x68 0x68
#set_sensor_io_ctl all None None None None None 1 None # load all delays?
......@@ -1443,8 +1443,149 @@ compressor_interrupt_control all en
compressor_control all 3
jpeg_sim_multi 4
jpeg_sim_multi 8
jpeg_sim_multi 8
jpeg_sim_multi 4
################## Simulate Parallel 3 ####################
./py393/test_mcntrl.py @py393/cocoargs --simulated=localhost:7777
measure_all "*DI"
setup_all_sensors True None 0xf
set_sensor_io_ctl all None None 1 # Set ARO low - check if it is still needed?
#just testing
set_gpio_ports 1 # enable software gpio pins - just for testing. Also needed for legacy i2c!
set_gpio_pins 0 1 # pin 0 low, pin 1 - high
#sequencer test
#ctrl_cmd_frame_sequencer <num_sensor> <reset=False> <start=False> <stop=False>
ctrl_cmd_frame_sequencer 0 0 1 0
write_cmd_frame_sequencer 0 1 1 0x700 0x6
write_cmd_frame_sequencer 0 1 1 0x700 0x9
write_cmd_frame_sequencer 0 1 1 0x700 0xa0
write_cmd_frame_sequencer 0 1 1 0x700 0x50
write_cmd_frame_sequencer 0 0 3 0x700 0xa000
write_cmd_frame_sequencer 0 1 0 0x700 0x90
write_cmd_frame_sequencer 0 0 2 0x700 0xe00
write_cmd_frame_sequencer 0 0 3 0x700 0xa
write_cmd_frame_sequencer 0 0 2 0x700 0x6
write_cmd_frame_sequencer 0 0 2 0x700 0x9
write_cmd_frame_sequencer 0 0 2 0x700 0x60
write_cmd_frame_sequencer 0 0 2 0x700 0x90
write_cmd_frame_sequencer 0 0 2 0x700 0x600
write_cmd_frame_sequencer 0 0 2 0x700 0x900
#stop compressor memory @2, restart @3 and copy frame number # Better to turn off compressor before resetting memory channel
#write_cmd_frame_sequencer 0 1 3 0x600 0x5 # stop compressor
write_cmd_frame_sequencer 0 1 2 0x6c0 0x1c49 # enable off
write_cmd_frame_sequencer 0 1 4 0x6c0 0x3c4b # enable on, copy frame
#write_cmd_frame_sequencer 0 1 4 0x6c0 0x3d4b # enable on, copy frame, reset buffer
write_cmd_frame_sequencer 0 1 4 0x600 0x7 # run compressor (after memory?)
#set_sensor_io_dly_hispi all 0x48 0x68 0x68 0x68 0x68
#set_sensor_io_ctl all None None None None None 1 None # load all delays?
compressor_control all None None None None None 2
compressor_interrupt_control all clr
compressor_interrupt_control all en
compressor_control all 3
jpeg_sim_multi 4
jpeg_sim_multi 8
jpeg_sim_multi 8
jpeg_sim_multi 4
################## Simulate Parallel 4 ####################
./py393/test_mcntrl.py @py393/cocoargs --simulated=localhost:7777
measure_all "*DI"
setup_all_sensors True None 0xf
set_sensor_io_ctl all None None 1 # Set ARO low - check if it is still needed?
#just testing
set_gpio_ports 1 # enable software gpio pins - just for testing. Also needed for legacy i2c!
set_gpio_pins 0 1 # pin 0 low, pin 1 - high
#sequencer test
#ctrl_cmd_frame_sequencer <num_sensor> <reset=False> <start=False> <stop=False>
ctrl_cmd_frame_sequencer 0 0 1 0
write_cmd_frame_sequencer 0 1 1 0x700 0x6
write_cmd_frame_sequencer 0 1 1 0x700 0x9
write_cmd_frame_sequencer 0 1 1 0x700 0xa0
write_cmd_frame_sequencer 0 1 1 0x700 0x50
write_cmd_frame_sequencer 0 0 3 0x700 0xa000
write_cmd_frame_sequencer 0 1 0 0x700 0x90
write_cmd_frame_sequencer 0 0 2 0x700 0xe00
write_cmd_frame_sequencer 0 0 3 0x700 0xa
write_cmd_frame_sequencer 0 0 2 0x700 0x6
write_cmd_frame_sequencer 0 0 2 0x700 0x9
write_cmd_frame_sequencer 0 0 2 0x700 0x60
write_cmd_frame_sequencer 0 0 2 0x700 0x90
write_cmd_frame_sequencer 0 0 2 0x700 0x600
write_cmd_frame_sequencer 0 0 2 0x700 0x900
#stop compressor memory @2, restart @3 and copy frame number # Better to turn off compressor before resetting memory channel
#write_cmd_frame_sequencer 0 1 3 0x600 0x5 # stop compressor
write_cmd_frame_sequencer 0 1 2 0x6c0 0x1c49 # enable off
write_cmd_frame_sequencer 0 1 4 0x6c0 0x3c4b # enable on, copy frame
#write_cmd_frame_sequencer 0 1 4 0x6c0 0x3d4b # enable on, copy frame, reset buffer
#### write_cmd_frame_sequencer 0 1 4 0x600 0x7 # run compressor (after memory?)
#set_sensor_io_dly_hispi all 0x48 0x68 0x68 0x68 0x68
#set_sensor_io_ctl all None None None None None 1 None # load all delays?
compressor_control all None None None None None 2
compressor_interrupt_control all clr
compressor_interrupt_control all en
compressor_control all 3
jpeg_sim_multi 4
jpeg_sim_multi 8
jpeg_sim_multi 8
jpeg_sim_multi 4
################## Simulate Parallel 5 ####################
./py393/test_mcntrl.py @py393/cocoargs --simulated=localhost:7777
measure_all "*DI"
setup_all_sensors True None 0xf
set_sensor_io_ctl all None None 1 # Set ARO low - check if it is still needed?
#just testing
set_gpio_ports 1 # enable software gpio pins - just for testing. Also needed for legacy i2c!
set_gpio_pins 0 1 # pin 0 low, pin 1 - high
#irq coming, image not changing - yes
write_cmd_frame_sequencer 0 1 2 0x600 0x5 #stop compressor `
write_cmd_frame_sequencer 0 1 2 0x680 0x1405 # stop sensor memory (+0) // sensor memory should be controlled first, (9 commands
write_cmd_frame_sequencer 0 1 2 0x6c0 0x1c49 # stop compressor memory (+0)
write_cmd_frame_sequencer 0 1 3 0x680 0x1507 # run sensor memory (+1) Can not be 0
write_cmd_frame_sequencer 0 1 4 0x6c0 0x3d4b # run compressor memory (+2)
write_cmd_frame_sequencer 0 1 4 0x600 0x7 # run compressor (+0)
#sequencer test
#ctrl_cmd_frame_sequencer <num_sensor> <reset=False> <start=False> <stop=False>
ctrl_cmd_frame_sequencer 0 0 1 0
write_cmd_frame_sequencer 0 1 1 0x700 0x6
write_cmd_frame_sequencer 0 1 1 0x700 0x9
write_cmd_frame_sequencer 0 1 1 0x700 0xa0
write_cmd_frame_sequencer 0 1 1 0x700 0x50
write_cmd_frame_sequencer 0 0 3 0x700 0xa000
write_cmd_frame_sequencer 0 1 0 0x700 0x90
write_cmd_frame_sequencer 0 0 2 0x700 0xe00
write_cmd_frame_sequencer 0 0 3 0x700 0xa
write_cmd_frame_sequencer 0 0 2 0x700 0x6
write_cmd_frame_sequencer 0 0 2 0x700 0x9
write_cmd_frame_sequencer 0 0 2 0x700 0x60
write_cmd_frame_sequencer 0 0 2 0x700 0x90
write_cmd_frame_sequencer 0 0 2 0x700 0x600
write_cmd_frame_sequencer 0 0 2 0x700 0x900
#set_sensor_io_dly_hispi all 0x48 0x68 0x68 0x68 0x68
#set_sensor_io_ctl all None None None None None 1 None # load all delays?
compressor_control all None None None None None 2
compressor_interrupt_control all clr
compressor_interrupt_control all en
compressor_control all 3
jpeg_sim_multi 4
jpeg_sim_multi 8
jpeg_sim_multi 8
jpeg_sim_multi 4
#write_cmd_frame_sequencer 0 1 4 0x6c0 0x1c49 # stop compressor memory (+0)
#write_cmd_frame_sequencer 0 1 6 0x6c0 0x3d4b # enable run compressor memory (+2)
################## Serial ####################
cd /usr/local/verilog/; test_mcntrl.py @hargs
......
py393/x393_mcntrl_membridge.py
View file @ 4bb4f227
......@@ -309,7 +309,7 @@ class X393McntrlMembridge(object):
disable_need = False,
repetitive= True,
single = False,
reset_frame = False,
reset_frame = True, # Is needed to propagate start addressFalse,
extra_pages = 0,
write_mem = write_ddr3,
enable = True,
......
py393/x393_mcntrl_tests.py
View file @ 4bb4f227
......@@ -294,7 +294,7 @@ class X393McntrlTests(object):
disable_need = False,
repetitive= True,
single = False,
reset_frame = False,
reset_frame = True, # False,
extra_pages = extra_pages,
write_mem = True,
enable = True,
......@@ -447,7 +447,7 @@ class X393McntrlTests(object):
disable_need = False,
repetitive= True,
single = False,
reset_frame = False,
reset_frame = True, # False,
extra_pages = extra_pages,
write_mem = False,
enable = True,
......@@ -562,7 +562,7 @@ class X393McntrlTests(object):
disable_need = False,
repetitive= True,
single = False,
reset_frame = False,
reset_frame = True, # False,
byte32 = byte32,
keep_open = keep_open,
extra_pages = extra_pages,
......@@ -705,7 +705,7 @@ class X393McntrlTests(object):
disable_need = False,
repetitive= True,
single = False,
reset_frame = False,
reset_frame = True, # False,
byte32 = byte32,
keep_open = keep_open,
extra_pages = extra_pages,
......
py393/x393_sens_cmprs.py
View file @ 4bb4f227
......@@ -964,6 +964,13 @@ class X393SensCmprs(object):
for i in range(4):
frames.append (int((status >> (4*i)) & 0xf))
return frames
def get_frame_number(self,
channel=0):
"""
@return frame number of the sequencer for the specified channel (4 bits)
"""
status = self.x393_axi_tasks.read_status(address = vrlg.CMDSEQMUX_STATUS)
return int((status >> (4*channel)) & 0xf)
def get_frame_number_i2c(self,
channel=0):
......@@ -1003,6 +1010,19 @@ class X393SensCmprs(object):
break;
return frameno # Frame number of the last new frame checked
def wait_frame(self,
channel = 0,
frame = 0,
loop_delay = 0.01,
timeout = 2.0):
timeout_time = time.time() + timeout
frameno = -1
while time.time() < timeout_time :
frameno = self.get_frame_number(channel)
if frameno == (frame & 15):
return frameno
return frameno # Frame number of the last new frame checked
def skip_frame_i2c(self,
channel_mask,
loop_delay = 0.01,
......@@ -1828,7 +1848,7 @@ class X393SensCmprs(object):
disable_need = False,
repetitive= True,
single = False,
reset_frame = False,
reset_frame = True, # False, now start address is only copied at reset_frame
extra_pages = 0,
write_mem = write_mem,
enable = True,
......
py393/x393_sensor.py
View file @ 4bb4f227
......@@ -1928,7 +1928,7 @@ input mem mtd4 ram1
stop - stop at the end of the frame (if repetitive),
single - acquire single frame ,
repetitive - repetitive mode
@param reset_frame - reset frame number
@param reset_frame - reset frame number. Needed after changing frame start address (i.e. initial set-up) !
@param vebose - verbose level
"""
try:
......@@ -2005,7 +2005,7 @@ input mem mtd4 ram1
disable_need = False,
repetitive= True,
single = False,
reset_frame = False,
reset_frame = True, # False,
extra_pages = 0,
write_mem = True,
enable = True,
......
x393.v
View file @ 4bb4f227
......@@ -529,6 +529,7 @@ module x393 #(
// Used withe a single-frame buffers
wire [4*FRAME_HEIGHT_BITS-1:0] cmprs_line_unfinished_dst; // input[15:0] number of the current (unfinished ) line in this (compressor) channel
wire [4*LAST_FRAME_BITS-1:0] cmprs_frame_number_dst; // input[15:0] current frame number (for multi-frame ranges) in this (compressor channel
wire [3:0] cmprs_frames_in_sync; // cmprs_frame_number_dst is valid (in bonded mode)
wire [3:0] cmprs_frame_done_dst; // input single-cycle pulse when the full frame (window) was transferred to/from DDR3 memory
// use as 'eot_real' in 353
wire [3:0] cmprs_suspend; // output suspend reading data for this channel - waiting for the source data
......@@ -1354,6 +1355,8 @@ assign axi_grst = axi_rst_pre;
.cmprs_frame_done_src (cmprs_frame_done_src), // output[3:0]
.cmprs_line_unfinished_dst (cmprs_line_unfinished_dst), // output[63:0]
.cmprs_frame_number_dst (cmprs_frame_number_dst), // output[63:0]
.cmprs_frames_in_sync (cmprs_frames_in_sync), // output[3:0]
.cmprs_frame_done_dst (cmprs_frame_done_dst), // output[3:0]
.cmprs_suspend (cmprs_suspend), // input[3:0]
// .master_follow (cmprs_master_follow), // input[3:0]
......@@ -2090,6 +2093,7 @@ assign axi_grst = axi_rst_pre;
.frame_done_src (cmprs_frame_done_src), // input[3:0]
.line_unfinished_dst (cmprs_line_unfinished_dst), // input[63:0]
.frame_number_dst (cmprs_frame_number_dst), // input[63:0]
.frames_in_sync (cmprs_frames_in_sync), // input[3:0]
.frame_done_dst (cmprs_frame_done_dst), // input[3:0]
.suspend (cmprs_suspend), // output[3:0]
......
x393_parallel.bit
View file @ 4bb4f227
No preview for this file type
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment