Commit 4340db45 authored by Andrey Filippov's avatar Andrey Filippov

more modules from x393_sata

parent 952b1c1a
/*******************************************************************************
* Module: fifo_sameclock_control
* Date:2016-01-20
* Author: andrey
* Description: BRAM-based fifo control, uses BARM output registers
*
* Copyright (c) 2016 Elphel, Inc .
* fifo_sameclock_control.v is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* fifo_sameclock_control.v is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
`timescale 1ns/1ps
module fifo_sameclock_control#(
parameter WIDTH = 9
)(
input clk,
input rst, // clock-sync reset
input wr, // write to FIFO (also applied directly to memory)
input rd, // read from FIFO, internally masked by nempty
output nempty, // at read side
output [WIDTH:0] fill_in, // valid at write side, latency 1 for read
output reg [WIDTH-1:0] mem_wa,
output reg [WIDTH-1:0] mem_ra,
output mem_re,
output mem_regen,
output reg over,
output reg under
);
reg [WIDTH:0] fill_ram;
reg ramo_full;
reg rreg_full;
assign mem_regen = mem_regen;
assign mem_re = (|fill_ram) && (!ramo_full || !rreg_full || rd);
assign mem_regen = ramo_full && (!rreg_full || rd);
assign nempty = rreg_full;
assign fill_in = fill_ram;
always @ (posedge clk) begin
if (rst) mem_wa <= 0;
else if (wr) mem_wa <= mem_wa + 1;
if (rst) mem_ra <= 0;
else if (mem_re) mem_ra <= mem_ra + 1;
if (rst) fill_ram <= 0;
else if (wr ^ mem_re) fill_ram <= mem_regen ? (fill_ram +1) : (fill_ram - 1);
if (rst) ramo_full <= 0;
else if (mem_re ^ mem_regen) ramo_full <= mem_re;
if (rst) rreg_full <= 0;
else if (mem_regen ^ (rd && rreg_full)) rreg_full <= mem_regen;
if (rst) under <= 0;
else under <= rd && ! rreg_full;
if (rst) over <= 0;
else over <= wr && fill_ram[WIDTH] && !fill_ram[WIDTH-1];
end
endmodule
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment