Commit 20cada45 authored by Andrey Filippov's avatar Andrey Filippov

added single-clock frame trailer processing (adding metadata), simulating/debugging

parent ca269a20
......@@ -63,7 +63,7 @@ module bit_stuffer_27_32#(
else ds_stage <= {ds_stage[0], ds};
if (rst) flush_stage <= 0;
else flush_stage <= {flush_stage[1:0], ds};
else flush_stage <= {flush_stage[1:0], flush_in};
if (rst || flush_in) early_length <= 0;
else if (ds) early_length <= early_length[4:0] + dlen; // early_length[5] is not used in calculations, it is just carry out
......@@ -91,6 +91,7 @@ module bit_stuffer_27_32#(
2'h3: data2 <= { 6'b0,data1 };
endcase
if (stage[0]) case (dlen1[4:0])
/*
5'h00: dmask2_rom <= 32'hffffffff;
5'h01: dmask2_rom <= 32'hfffffffe;
5'h02: dmask2_rom <= 32'hfffffffc;
......@@ -123,6 +124,39 @@ module bit_stuffer_27_32#(
5'h1d: dmask2_rom <= 32'he0000000;
5'h1e: dmask2_rom <= 32'hc0000000;
5'h1f: dmask2_rom <= 32'h80000000;
*/
5'h00: dmask2_rom <= 32'hffffffff;
5'h01: dmask2_rom <= 32'h7fffffff;
5'h02: dmask2_rom <= 32'h3fffffff;
5'h03: dmask2_rom <= 32'h1fffffff;
5'h04: dmask2_rom <= 32'h0fffffff;
5'h05: dmask2_rom <= 32'h07ffffff;
5'h06: dmask2_rom <= 32'h03ffffff;
5'h07: dmask2_rom <= 32'h01ffffff;
5'h08: dmask2_rom <= 32'h00ffffff;
5'h09: dmask2_rom <= 32'h007fffff;
5'h0a: dmask2_rom <= 32'h003fffff;
5'h0b: dmask2_rom <= 32'h001fffff;
5'h0c: dmask2_rom <= 32'h000fffff;
5'h0d: dmask2_rom <= 32'h0007ffff;
5'h0e: dmask2_rom <= 32'h0003ffff;
5'h0f: dmask2_rom <= 32'h0001ffff;
5'h10: dmask2_rom <= 32'h0000ffff;
5'h11: dmask2_rom <= 32'h00007fff;
5'h12: dmask2_rom <= 32'h00003fff;
5'h13: dmask2_rom <= 32'h00001fff;
5'h14: dmask2_rom <= 32'h00000fff;
5'h15: dmask2_rom <= 32'h000007ff;
5'h16: dmask2_rom <= 32'h000003ff;
5'h17: dmask2_rom <= 32'h000001ff;
5'h18: dmask2_rom <= 32'h000000ff;
5'h19: dmask2_rom <= 32'h0000007f;
5'h1a: dmask2_rom <= 32'h0000003f;
5'h1b: dmask2_rom <= 32'h0000001f;
5'h1c: dmask2_rom <= 32'h0000000f;
5'h1d: dmask2_rom <= 32'h00000007;
5'h1e: dmask2_rom <= 32'h00000003;
5'h1f: dmask2_rom <= 32'h00000001;
endcase
// barrel shifter stage 3 (0/1), combined with output/hold register
if (ds_stage[1]) begin
......@@ -131,7 +165,9 @@ module bit_stuffer_27_32#(
data3[DATA3_LEN-1-32: 0] <= dlen2[0] ? data2[DATA2_LEN-31-1 : 0] : {data2[DATA2_LEN-32-1 : 0], 1'b0};
end
dv <= (ds_stage[1] && dlen2[5]) || (flush_stage[1] && !(|data3[DATA3_LEN-1 -: 32]));
// dv <= (ds_stage[1] && dlen2[5]) || (flush_stage[1] && !(|data3[DATA3_LEN-1 -: 32]));
// dv <= (ds_stage[1] && dlen1[5]) || (flush_stage[1] && !(|data3[DATA3_LEN-1 -: 32]));
dv <= (ds_stage[0] && dlen1[5]) || (flush_stage[1] && !(|data3[DATA3_LEN-1 -: 32]));
if (rst || ds_stage[1]) bytes_out <= 0; // if the dv was caused by 32 bits full - output 4 bytes
else if (flush_stage[1]) bytes_out <= pre_bits_out_w[4:3];
......
......@@ -23,11 +23,11 @@
module bit_stuffer_escape(
input xclk, // pixel clock, sync to incoming data
input rst, // @xclk
// data from external FIFO (35x16 should be OK)
input [31:0] din, // input data, MSB aligned
input [1:0] bytes_in, // number of bytes, valid @ ds (0 means 4)
input flush_in, // end of input data (ignore din/bytes_in)
input in_stb, // input data/bytes_in/flush_in strobe
input in_stb, // input data/bytes_in strobe
input flush_in, // end of input data
output reg [31:0] d_out, // output 32-bit data
output reg [1:0] bytes_out, // valid @dv(only), 0 means 4 bytes
output reg dv, // output data valid
......
/*******************************************************************************
* Module: bit_stuffer_metadata
* Date:2015-10-25
* Author: andrey
* Description:
*
* Copyright (c) 2015 Elphel, Inc .
* bit_stuffer_metadata.v is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* bit_stuffer_metadata.v is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
`timescale 1ns/1ps
module bit_stuffer_metadata(
input mclk,
input mrst, // @posedge mclk, sync reset
input xclk,
input xrst, // @posedge xclk, sync reset
input last_block, // use it to copy timestamp from fifo
// time stamping - will copy time at the end of color_first (later than the first hact after vact in the current frame, but before the next one
// and before the data is needed for output
input ts_pre_stb, // @mclk - 1 cycle before receiving 8 bytes of timestamp data
input [7:0] ts_data, // timestamp data (s0,s1,s2,s3,us0,us1,us2,us3==0)
input color_first, // @fradv_clk only used for timestamp
input [31:0] din, // input data, MSB aligned
input [1:0] bytes_in, // number of bytes, valid @ ds (0 means 4)
input in_stb, // input data/bytes_in strobe
input flush, // end of input data
input abort, // @ any, extracts 0->1 and flushes
// outputs @ negedge clk
output reg [31:0] data_out, // [31:0] output data
output reg data_out_valid,// output data valid
output reg done, // reset by !en, goes high after some delay after flushing
output reg running // from registering timestamp until done
`ifdef DEBUG_RING
, output reg [3:0] dbg_etrax_dma
,output dbg_ts_rstb
,output [7:0] dbg_ts_dout
`endif
);
reg [7:0] time_ram0[0:3]; // 0 - seconds, 1 - microseconds MSB in the output 32-bit word, byt LSB of the sec/usec
reg [7:0] time_ram1[0:3];
reg [7:0] time_ram2[0:3];
reg [7:0] time_ram3[0:3];
reg [3:0] ts_in=8;
reg last_block_d; // last_block delayed by one clock
reg color_first_r;
reg [2:0] abort_r;
reg force_flush;
// reg color_first_r; // registered with the same clock as color_first to extract leading edge
// stb_time[2] - single-cycle pulse after color_first goes low
// reg [19:0] imgsz32; // current image size in multiples of 32-bytes
reg [21:0] imgsz4; // current image size in multiples of 4-bytes
reg last_stb_4; // last stb_in was 4 bytes
reg trailer;
reg meta_out;
reg [1:0] meta_word;
reg zeros_out; // output of 32 bytes (8 words) of zeros
wire trailer_done = (imgsz4[2:0] == 7) && zeros_out;
wire meta_last = (imgsz4[2:0] == 7) && meta_out;
// re-clock enable to this clock
wire ts_rstb= last_block && !last_block_d; // enough time to have timestamp data; // one cycle before getting timestamp data from FIFO
wire [7:0] ts_dout; // timestamp data, byte at a time
wire write_size = (in_stb && (bytes_in != 0)) || (flush && last_stb_4);
wire stb_start = !color_first && color_first_r;
wire stb = in_stb & !trailer && !force_flush;
always @ (posedge xclk) begin
if (xrst ||trailer_done) imgsz4 <= 0;
else if (stb || trailer) imgsz4 <= imgsz4 + 1;
if (stb) last_stb_4 <= (bytes_in == 0);
last_block_d <= last_block;
color_first_r <= color_first;
if (xrst) ts_in <= 8;
else if (ts_rstb) ts_in <= 0;
else if (!ts_in[3]) ts_in <= ts_in + 1;
if ((ts_in[3] && (ts_in[1:0] == 0)) || write_size) time_ram0[ts_in[3:2]] <= ts_in[3]? ({imgsz4[5:0],flush?2'b0:bytes_in}):ts_dout; //ts_in[3:2] == 2'b10 when write_size
if ((ts_in[3] && (ts_in[1:0] == 1)) || write_size) time_ram1[ts_in[3:2]] <= ts_in[3]? (imgsz4[13:6]):ts_dout;
if ((ts_in[3] && (ts_in[1:0] == 2)) || write_size) time_ram2[ts_in[3:2]] <= ts_in[3]? (imgsz4[21:14]):ts_dout;
if ((ts_in[3] && (ts_in[1:0] == 3)) || write_size) time_ram3[ts_in[3:2]] <= ts_in[3]? (8'hff):ts_dout;
if (xrst) trailer <= 0;
else if (flush || force_flush) trailer <= 1;
else if (trailer_done) trailer <= 0;
if (xrst) meta_out <= 0;
else if ((flush || trailer) && (imgsz4[2:0] == 4)) meta_out <= 1;
else if (meta_last) meta_out <= 0;
if (!meta_out) meta_word <= 0;
else meta_word <= meta_word + 1;
if (xrst) zeros_out <= 0;
else if (meta_last) zeros_out <= 1;
else if (trailer_done) zeros_out <= 0;
data_out <= ({32{stb}} & din) | ({32{meta_out}} & {time_ram0[meta_word],time_ram1[meta_word],time_ram2[meta_word],time_ram3[meta_word]});
data_out_valid <= stb || trailer;
if (xrst) running <= 0;
else if (stb_start) running <= 1;
else if (trailer) running <= 0;
done <= trailer_done;
// re-clock abort, extract leading edge
abort_r <= {abort_r[0] & ~abort_r[1], abort_r[0], abort & ~trailer};
if (xrst || trailer) force_flush <= 0;
else if (abort_r) force_flush <= 1;
end
// just for testing
`ifdef DEBUG_RING
assign dbg_ = ts_rstb;
assign dbg_ts_dout = ts_dout;
always @ (posedge xclk) begin
dbg_etrax_dma <= imgsz4[3:0];
end
`endif
//color_first && color_first_r
timestamp_fifo timestamp_fifo_i (
.sclk (mclk), // input
.srst (mrst), // input
.pre_stb (ts_pre_stb), // input
.din (ts_data), // input[7:0]
.aclk (xclk), //fradv_clk), // input
.arst (xrst), //fradv_clk), // input
.advance (stb_start), // triggers at the 0->1
.rclk (xclk), // input
.rrst (xrst), //fradv_clk), // input
.rstb (ts_rstb), // input
.dout (ts_dout) // output[7:0] reg
);
endmodule
......@@ -25,7 +25,6 @@
**
*/
`include "system_defines.vh"
// 01/22/2004 - extended flush until ready (modified stuffer.v too)
module huffman_snglclk (
input xclk, // pixel clock, sync to incoming data
input rst, // @xclk
......@@ -47,15 +46,16 @@ module huffman_snglclk (
output last_block,
output reg test_lbw,
output gotLastBlock, // last block done - flush the rest bits
input clk_flush, // other clock to generate synchronized 1-cycle flush_clk output
output flush_clk, // 1-cycle flush output @ clk_flush
// input clk_flush, // other clock to generate synchronized 1-cycle flush_clk output
// output flush_clk, // 1-cycle flush output @ clk_flush
output fifo_or_full // FIFO output register full - just for debuging
);
// A small input FIFO, only needed for RLL >16 that require several clock cycles to output
reg fifo_re;
reg fifo_re_r;
wire fifo_rdy;
wire fifo_re = fifo_re_r && fifo_rdy;
wire [15:0] fifo_out;
fifo_same_clock #(
.DATA_WIDTH(16),
......@@ -80,8 +80,8 @@ module huffman_snglclk (
wire gotLastWord= !fifo_out[14] && fifo_out[12] && fifo_re; // (AC or RLL) and last bit set
wire gotColor= fifo_out[13];
reg [5:0] rll; // 2 MSBs - counter to send "f0" codes
reg [3:0] rll1; // valid at cycle "1"
reg [3:0] rll2; // valid at cycle "1"
// reg [3:0] rll1; // valid at cycle "1"
wire [3:0] rll_late; // match AC's length timing
reg [2:0] gotAC_r;
reg [2:0] gotDC_r;
reg [2:0] gotEOB_r;
......@@ -109,8 +109,8 @@ module huffman_snglclk (
assign fifo_or_full = fifo_rdy;
always @(posedge xclk) begin
if (rst) fifo_re <= 0;
else fifo_re <= fifo_rdy && !(fifo_re && gotRLL) && !(|rll[5:4]);
if (rst) fifo_re_r <= 0;
else fifo_re_r <= fifo_rdy && !(fifo_re && gotRLL) && !(|rll[5:4]);
if (rst) gotAC_r <= 0;
else gotAC_r <= {gotAC_r[1:0], gotAC && fifo_re};
......@@ -132,8 +132,8 @@ module huffman_snglclk (
if (rst) rll[3:0] <= 0;
else if (fifo_re) rll[3:0] <= gotRLL ? fifo_out[3:0] : 4'b0;
rll1 <= rll[3:0];
rll2 <= rll1;
// rll1 <= rll[3:0];
// rll_late <= rll1;
if (rst) gotF0_r[2:1] <= 0;
else gotF0_r[2:1] <= {gotF0_r[1], (|rll[5:4])};
......@@ -145,7 +145,7 @@ module huffman_snglclk (
htable_addr[7:0] <= ({8{gotEOB_r[2]}} & 8'h0 ) | // generate 00 code (end of block)
({8{gotF0_r[2]}} & 8'hf0 ) | // generate f0 code (16 zeros)
({8{gotDC_r[2]}} & {val_length[3:0], 4'hf}) |
({8{gotAC_r[2]}} & {rll2[3:0], val_length[3:0]});
({8{gotAC_r[2]}} & {rll_late[3:0], val_length[3:0]});
if (rst) htable_re <= 0;
else htable_re <= {htable_re[1:0], gotEOB_r[2] | gotF0_r[2] | gotDC_r[2] | gotAC_r[2]};
......@@ -195,7 +195,7 @@ module huffman_snglclk (
);
ram18_var_w_var_r #(
.REGISTERS(0),
.REGISTERS(1),
.LOG2WIDTH_WR(4),
.LOG2WIDTH_RD(5),
.DUMMY(0)
......@@ -235,6 +235,16 @@ module huffman_snglclk (
.dout (val_length_late) // output[0:0]
);
dly_16 #(
.WIDTH(4)
) dly_16_rll_late_i (
.clk (xclk), // input
.rst (rst), // input
.dly (4'h2), // input[3:0]
.din (rll[3:0]), // input[0:0]
.dout (rll_late) // output[0:0]
);
huffman_merge_code_literal huffman_merge_code_literal_i (
.clk (xclk), // input
.in_valid (htable_re[2]), // input
......@@ -246,7 +256,7 @@ module huffman_snglclk (
.out_bits (do27), // output[26:0] reg
.out_len (dl) // output[4:0] reg
);
/*
pulse_cross_clock flush_clk_i (
.rst (rst),
.src_clk (xclk),
......@@ -255,6 +265,6 @@ module huffman_snglclk (
.out_pulse (flush_clk),
.busy ());
*/
endmodule
/*******************************************************************************
* Module: huffman_stuffer_meta
* Date:2015-10-26
* Author: andrey
* Description: Huffman encoder, bit stuffer, inser meta-data
* "New" part of the JPEG/JP4 comressor that used double frequency clock
*
* Copyright (c) 2015 Elphel, Inc .
* huffman_stuffer_meta.v is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* huffman_stuffer_meta.v is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*******************************************************************************/
`timescale 1ns/1ps
module huffman_stuffer_meta(
input mclk, // system clock to write tables
input mrst,
input xclk, // pixel clock, sync to incoming data
input en_huffman, // @xclk
input en_stuffer, // @xclk
input abort_stuffer, // @ any
// Interface to program Huffman tables
input tser_we, // enable write to a table
input tser_a_not_d, // address/not data distributed to submodules
input [ 7:0] tser_d, // byte-wide serialized tables address/data to submodules
// Input data
input [15:0] di, // [15:0] specially RLL prepared 16-bit data (to FIFO) (sync to xclk)
input ds, // di valid strobe (sync to xclk)
// time stamping - will copy time at the end of color_first (later than the first hact after vact in the current frame, but before the next one
// and before the data is needed for output
input ts_pre_stb, // @mclk - 1 cycle before receiving 8 bytes of timestamp data
input [7:0] ts_data, // timestamp data (s0,s1,s2,s3,us0,us1,us2,us3==0)
input color_first, // @fradv_clk only used for timestamp
// outputs @ negedge clk
output [31:0] data_out, // [31:0] output data
output data_out_valid,// output data valid
output done, // reset by !en, goes high after some delay after flushing
output running // from registering timestamp until done
`ifdef DEBUG_RING
,output test_lbw,
output gotLastBlock, // last block done - flush the rest bits
output [3:0] dbg_etrax_dma
,output dbg_ts_rstb
,output [7:0] dbg_ts_dout
`endif
);
wire [26:0] huffman_do27;
wire [4:0] huffman_dl;
wire huffman_dv;
wire huffman_flush;
wire huffman_last_block;
wire [31:0] stuffer_do32;
wire [1:0] stuffer_bytes;
wire stuffer_dv;
wire stuffer_flush_out;
wire [31:0] escape_do32;
wire [1:0] escape_bytes;
wire escape_dv;
wire escape_flush_out;
huffman_snglclk huffman_snglclk_i (
.xclk (xclk), // input
.rst (~en_huffman), // input
.mclk (mclk), // input
.tser_we (tser_we), // input
.tser_a_not_d (tser_a_not_d), // input
.tser_d (tser_d), // input[7:0]
.di (di), // input[15:0]
.ds (ds), // input
.do27 (huffman_do27), // output[26:0]
.dl (huffman_dl), // output[4:0]
.dv (huffman_dv), // output
.flush (huffman_flush), // output
.last_block (huffman_last_block), // output
`ifdef DEBUG_RING
.test_lbw (test_lbw),
.gotLastBlock (gotLastBlock), // last block done - flush the rest bits
`else
.test_lbw (),
.gotLastBlock (), // last block done - flush the rest bits
`endif
// .clk_flush(), // input
// .flush_clk(), // output
.fifo_or_full() // output
);
bit_stuffer_27_32 #(
.DIN_LEN(27)
) bit_stuffer_27_32_i (
.xclk (xclk), // input
.rst (~en_huffman), // input
.din (huffman_do27), // input[26:0]
.dlen (huffman_dl), // input[4:0]
.ds (huffman_dv), // input
.flush_in (huffman_flush), // input
.d_out (stuffer_do32), // output[31:0]
.bytes_out (stuffer_bytes), // output[1:0] reg
.dv (stuffer_dv), // output reg
.flush_out (stuffer_flush_out) // output reg
);
bit_stuffer_escape bit_stuffer_escape_i (
.xclk (xclk), // input
.rst (~en_huffman), // input
.din (stuffer_do32), // input[31:0]
.bytes_in (stuffer_bytes), // input[1:0]
.in_stb (stuffer_dv), // input
.flush_in (stuffer_flush_out), // input
.d_out (escape_do32), // output[31:0] reg
.bytes_out (escape_bytes), // output[1:0] reg
.dv (escape_dv), // output reg
.flush_out (escape_flush_out) // output reg
);
bit_stuffer_metadata bit_stuffer_metadata_i (
.mclk (mclk), // input
.mrst (mrst), // input
.xclk (xclk), // input
.xrst (~en_stuffer), // input
.last_block (huffman_last_block), // input
.ts_pre_stb (ts_pre_stb), // input
.ts_data (ts_data), // input[7:0]
.color_first (color_first), // input
.din (escape_do32), // input[31:0]
.bytes_in (escape_bytes), // input[1:0]
.in_stb (escape_dv), // input
.flush (escape_flush_out), // input
.abort (abort_stuffer), // input
.data_out (data_out), // output[31:0] reg
.data_out_valid (data_out_valid), // output reg
.done (done), // output reg
.running (running) // output reg
);
endmodule
......@@ -1126,6 +1126,44 @@ module jp_channel#(
,.test_cntr1(test_cntr1[7:0])
`endif
);
// Debugging - attaching new compressor module in parallel to the existing one
wire [31:0] alt_stuffer_do; // SuppressThisWarning VEditor Unused
wire alt_stuffer_dv; // SuppressThisWarning VEditor Unused
wire alt_stuffer_done; // SuppressThisWarning VEditor Unused
wire alt_stuffer_running; // SuppressThisWarning VEditor Unused
huffman_stuffer_meta huffman_stuffer_meta_i (
.mclk (mclk), // input
.mrst (mrst), // input
.xclk (xclk), // input
.en_huffman (frame_en), // input
.en_stuffer (stuffer_en), // input
.abort_stuffer (force_flush_long), // input
.tser_we (tser_he), // input
.tser_a_not_d (tser_a_not_d), // input
.tser_d (tser_d), // input[7:0]
.di (enc_do[15:0]), // input[15:0]
.ds (enc_dv), // input
.ts_pre_stb (ts_pre_stb), // input
.ts_data (ts_data), // input[7:0]
.color_first (color_first), // input valid @xclk - only for sec/usec
.data_out (alt_stuffer_do), // output[31:0]
.data_out_valid (alt_stuffer_dv), // output
.done (alt_stuffer_done), // output
.running (alt_stuffer_running) // output
`ifdef DEBUG_RING
,.test_lbw (), // output
.gotLastBlock (), // output // last block done - flush the rest bits
.dbg_etrax_dma (), // output[3:0]
.dbg_ts_rstb (), // output
.dbg_ts_dout () //output[7:0]
`endif
);
/*
,output dbg_ts_rstb
,output [7:0] dbg_ts_dout
......
......@@ -505,6 +505,7 @@ module mcontr_sequencer #(
.rclk (mclk), // input
.raddr (cmd_addr), // input[9:0]
.ren (ren0), // input TODO: verify cmd_busy[0] is correct (was cmd_busy ). TODO: make cleaner ren/regen
// .ren (ren0 && !sequence_done), // input TODO: verify cmd_busy[0] is correct (was cmd_busy ). TODO: make cleaner ren/regen
.regen (ren0), // input
.data_out (phy_cmd0_word), // output[31:0]
.wclk (cmd0_clk), // input
......@@ -513,14 +514,19 @@ module mcontr_sequencer #(
.web (4'hf), // input[3:0]
.data_in (cmd0_data) // input[31:0]
);
// NOTE: Simulation sometimes may show:
// Memory Collision Error on RAMB36E1 : x393_testbench03.x393_i.mcntrl393_i.memctrl16_i.mcontr_sequencer_i.cmd1_buf_i.RAMB36E1_i.genblk1.INT_RAMB_TDP.chk_for_col_msg
// It is OK, as the sequencer reads 2 extra (unused) locations before it stops at the end of block (stop depends on the read memory that has latency)
// Command sequence memory 0 ("manual"):
// Command sequence memory 1
ram_1kx32_1kx32 #(
.REGISTERS (1) // (0) // register output
) cmd1_buf_i (
.rclk (mclk), // input
.raddr (cmd_addr), // input[9:0]
.ren ( ren1), // input ??? TODO: make cleaner ren/regen
// .ren ( ren1 && !sequence_done), // input ??? TODO: make cleaner ren/regen
.regen ( ren1), // input ???
.data_out (phy_cmd1_word), // output[31:0]
.wclk (cmd1_clk), // input
......
[*]
[*] GTKWave Analyzer v3.3.66 (w)1999-2015 BSI
[*] Tue Oct 13 02:08:59 2015
[*] Mon Oct 26 23:54:57 2015
[*]
[dumpfile] "/home/andrey/git/x393/simulation/x393_testbench02-20151012161611192.fst"
[dumpfile_mtime] "Mon Oct 12 22:50:38 2015"
[dumpfile_size] 172697643
[dumpfile] "/home/andrey/git/x393/simulation/x393_testbench02-20151012200650115.fst"
[dumpfile_mtime] "Tue Oct 13 02:42:50 2015"
[dumpfile_size] 166114960
[savefile] "/home/andrey/git/x393/x393_testbench02.sav"
[timestart] 0
[timestart] 136579500
[size] 1823 1180
[pos] 1922 0
*-25.149160 71803197 102872500 116192500 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
*-15.149160 136632388 102872500 116192500 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
[treeopen] x393_testbench02.
[treeopen] x393_testbench02.compressor_control.
[treeopen] x393_testbench02.par12_hispi_psp4l_i.
[treeopen] x393_testbench02.par12_hispi_psp4l_i.cmprs_channel_block[0].
[treeopen] x393_testbench02.simul_axi_hp1_wr_i.
[treeopen] x393_testbench02.simul_axi_hp1_wr_i.waddr_i.
[treeopen] x393_testbench02.simul_clk_mult_i.
[treeopen] x393_testbench02.simul_saxi_gp0_wr_i.waddr_i.
[treeopen] x393_testbench02.simul_sensor12bits_i.
[treeopen] x393_testbench02.x393_i.
[treeopen] x393_testbench02.x393_i.compressor393_i.
[treeopen] x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].
[treeopen] x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.
[treeopen] x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.chn_rd_buf_i.
......@@ -32,9 +28,7 @@
[treeopen] x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_out_fifo_i.
[treeopen] x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.cmprs_pixel_buf_iface_i.
[treeopen] x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.csconvert_i.
[treeopen] x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.i_huffman.
[treeopen] x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.i_huffman.i_huff_fifo.
[treeopen] x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.quantizer393_i.
[treeopen] x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.
[treeopen] x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.table_ad_transmit_i.
[treeopen] x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.table_ad_transmit_i.i_end_burst.
......@@ -56,6 +50,7 @@
[treeopen] x393_testbench02.x393_i.mcntrl393_i.
[treeopen] x393_testbench02.x393_i.mcntrl393_i.cmd_encod_linear_rw_i.cmd_encod_linear_wr_i.
[treeopen] x393_testbench02.x393_i.mcntrl393_i.mcntrl_linear_rw_chn1_i.
[treeopen] x393_testbench02.x393_i.mcntrl393_i.memctrl16_i.
[treeopen] x393_testbench02.x393_i.mcntrl393_i.memctrl16_i.mcontr_sequencer_i.
[treeopen] x393_testbench02.x393_i.mcntrl393_i.memctrl16_i.mcontr_sequencer_i.phy_cmd_i.phy_top_i.
[treeopen] x393_testbench02.x393_i.mcntrl393_i.sens_comp_block[0].mcntrl_linear_wr_sensor_i.
......@@ -106,8 +101,25 @@
[sst_vpaned_height] 611
@820
x393_testbench02.TEST_TITLE[639:0]
@800200
-memcntrl_debug
@29
x393_testbench02.x393_i.mcntrl393_i.memctrl16_i.mcontr_sequencer_i.sequence_done
@22
x393_testbench02.x393_i.mcntrl393_i.memctrl16_i.mcontr_sequencer_i.cmd_addr[9:0]
@28
x393_testbench02.x393_i.mcntrl393_i.memctrl16_i.mcontr_sequencer_i.pause
x393_testbench02.x393_i.mcntrl393_i.memctrl16_i.mcontr_sequencer_i.ren1
@22
x393_testbench02.x393_i.mcntrl393_i.memctrl16_i.mcontr_sequencer_i.cmd1_addr[9:0]
@28
x393_testbench02.x393_i.mcntrl393_i.memctrl16_i.mcontr_sequencer_i.cmd1_we
x393_testbench02.x393_i.mcntrl393_i.memctrl16_i.mcontr_sequencer_i.cmd_sel
x393_testbench02.x393_i.mcntrl393_i.memctrl16_i.mcontr_sequencer_i.cmd_busy[2:0]
@200
-
@1000200
-memcntrl_debug
@c00200
-debug_ring
@200
......@@ -1240,8 +1252,9 @@ x393_testbench02.x393_i.membridge_i.status_generate_i.wd[7:0]
@1401200
-membridge_status
-membridge
@c00200
@800200
-compressor0
@c00200
-func_compressor_control
@22
x393_testbench02.func_compressor_control.bayer[31:0]
......@@ -1581,9 +1594,66 @@ x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.enco
-
@1000200
-encoder_DCAC
@800200
@c00200
-stuffer
@28
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.stb_start
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.ts_rstb
@22
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.ts_dout[7:0]
@800022
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.ts_cycles[6:0]
@28
(0)x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.ts_cycles[6:0]
(1)x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.ts_cycles[6:0]
(2)x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.ts_cycles[6:0]
(3)x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.ts_cycles[6:0]
(4)x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.ts_cycles[6:0]
(5)x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.ts_cycles[6:0]
(6)x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.ts_cycles[6:0]
@1001200
-group_end
@28
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.last_block
@22
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.dl[3:0]
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.d[15:0]
@28
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.stb
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.stb_start
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.abort
@22
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.q[15:0]
@28
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.qv
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.flush
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.flush_now
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.flushing
@22
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.etrax_dma[3:0]
@28
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.inc_imgsz32
@22
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.imgsz32[19:0]
@28
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.start_time_out
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.start_sizeout
@22
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.size_count[23:0]
@28
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.time_out
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.time_size_out
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.size_out[2:0]
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.size_out_over
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.flush_end
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.trailer
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.flush_end_delayed
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.done
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.running
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.flushing
@200
-
@28
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.ts_pre_stb
@22
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer393_i.ts_data[7:0]
......@@ -1690,7 +1760,7 @@ x393_testbench02.x393_i.timing393_i.ts_stb_chn0
x393_testbench02.x393_i.timing393_i.ts_stb[3:0]
@200
-
@1000200
@1401200
-stuffer
@22
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.stuffer_do[15:0]
......@@ -1923,8 +1993,10 @@ x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.yc_n
@28
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.yc_pre_first_out
x393_testbench02.x393_i.compressor393_i.cmprs_channel_block[0].jp_channel_i.ywe
@1401200
@1000200
-compressor0
@200
-
@c00200
-sim_cmprs_output
@22
......@@ -3851,7 +3923,7 @@ x393_testbench02.x393_i.sensors393_i.sensor_channel_block[0].sensor_channel_i.se
x393_testbench02.x393_i.sensors393_i.sensor_channel_block[0].sensor_channel_i.hact_to_fifo
@200
-
@800200
@c00200
-sens_i2c_io
@22
x393_testbench02.x393_i.sensors393_i.sensor_channel_block[0].sensor_channel_i.sensor_i2c_io_i.cmd_ad[7:0]
......@@ -4474,6 +4546,7 @@ x393_testbench02.x393_i.sensors393_i.sensor_channel_block[0].sensor_channel_i.se
x393_testbench02.x393_i.sensors393_i.sensor_channel_block[0].sensor_channel_i.sensor_i2c_io_i.sensor_i2c_i.wpage_wr[3:0]
@1000200
-sens_i2c
@1401200
-sens_i2c_io
@c00200
-sensor_fifo
......
This diff is collapsed.
......@@ -21,6 +21,7 @@
`timescale 1ns/1ps
`include "system_defines.vh"
`define SAME_SENSOR_DATA 1
`define COMPRESS_SINGLE
//`define use200Mhz 1
//`define DEBUG_FIFO 1
`undef WAIT_MRS
......@@ -1230,17 +1231,20 @@ assign #10 gpio_pins[9] = gpio_pins[8];
`endif
`ifdef READBACK_DELAYS
TEST_TITLE = "READBACK";
`ifdef COMPRESS_SINGLE
TEST_TITLE = "COMPRESS_FRAME";
$display("===================== TEST_%s =========================",TEST_TITLE);
axi_get_delays;
`endif
/*
compressor_run (0, 2); // run single
compressor_run (1, 2); // run single
compressor_run (2, 2); // run single
compressor_run (3, 2); // run single
*/
`endif
`ifdef READBACK_DELAYS
TEST_TITLE = "READBACK";
$display("===================== TEST_%s =========================",TEST_TITLE);
axi_get_delays;
`endif
`ifdef TEST_MEMBRIDGE
TEST_TITLE = "MEMBRIDGE_READ # 1";
......@@ -2699,8 +2703,9 @@ task setup_sensor_channel;
1); // disable "need" (yield to sensor channels)
// compressor_run (num_sensor, 3); // run repetitive mode
`ifndef COMPRESS_SINGLE
compressor_run (num_sensor, 3); // run repetitive mode
`endif
TEST_TITLE = "DELAYS_SETUP";
$display("===================== TEST_%s =========================",TEST_TITLE);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment