Commit 1c50ea54 authored by Andrey Filippov's avatar Andrey Filippov

adding control for lwir sensor

parent 37190574
...@@ -1891,7 +1891,7 @@ class X393ExportC(object): ...@@ -1891,7 +1891,7 @@ class X393ExportC(object):
dw.append(("in_busy", 8, 1,0, "Frame segments are waited for or received to FIFO")) dw.append(("in_busy", 8, 1,0, "Frame segments are waited for or received to FIFO"))
dw.append(("out_busy", 9, 1,0, "received frame is being transferred to video memory")) dw.append(("out_busy", 9, 1,0, "received frame is being transferred to video memory"))
dw.append(("crc_err", 10, 1,0, "At least 1 CRC error happened since reset by command bit")) dw.append(("crc_err", 10, 1,0, "At least 1 CRC error happened since reset by command bit"))
dw.append(("fake in", 11, 1,0, "Just to keep hardware")) dw.append(("fake_in", 11, 1,0, "Just to keep hardware"))
dw.append(("senspgmin", 24, 1,0, "senspgm pin state (0 means non-FPGA SFE is present)")) dw.append(("senspgmin", 24, 1,0, "senspgm pin state (0 means non-FPGA SFE is present)"))
dw.append(("busy", 25, 1,0, "in_busy OR out_busy")) dw.append(("busy", 25, 1,0, "in_busy OR out_busy"))
dw.append(("seq_num", 26, 6,0, "Sequence number")) dw.append(("seq_num", 26, 6,0, "Sequence number"))
......
...@@ -130,11 +130,13 @@ FRAME_START_ADDRESS_INC = 0x80000 ...@@ -130,11 +130,13 @@ FRAME_START_ADDRESS_INC = 0x80000
#SENSOR_INTERFACE_HISPI = "HISPI" #SENSOR_INTERFACE_HISPI = "HISPI"
# for now - single sensor type per interface # for now - single sensor type per interface
SENSOR_INTERFACES={x393_sensor.SENSOR_INTERFACE_PARALLEL: {"mv":2800, "freq":24.0, "iface":"2V5_LVDS"}, SENSOR_INTERFACES={x393_sensor.SENSOR_INTERFACE_PARALLEL: {"mv":2800, "freq":24.0, "iface":"2V5_LVDS"},
x393_sensor.SENSOR_INTERFACE_HISPI: {"mv":1820, "freq":24.444, "iface":"1V8_LVDS"}} x393_sensor.SENSOR_INTERFACE_HISPI: {"mv":1820, "freq":24.444, "iface":"1V8_LVDS"},
x393_sensor.SENSOR_INTERFACE_LWIR: {"mv":2800, "freq":24.0, "iface":"2V5_LVDS"}}
# x393_sensor.SENSOR_INTERFACE_HISPI: {"mv":2500, "freq":24.444, "iface":"1V8_LVDS"}} # x393_sensor.SENSOR_INTERFACE_HISPI: {"mv":2500, "freq":24.444, "iface":"1V8_LVDS"}}
SENSOR_DEFAULTS= {x393_sensor.SENSOR_INTERFACE_PARALLEL: {"width":2592, "height":1944, "top":0, "left":0, "slave":0x48, "i2c_delay":100, "bayer":3}, SENSOR_DEFAULTS= { x393_sensor.SENSOR_INTERFACE_PARALLEL: {"width":2592, "height":1944, "top":0, "left":0, "slave":0x48, "i2c_delay":100, "bayer":3},
x393_sensor.SENSOR_INTERFACE_HISPI: {"width":4384, "height":3288, "top":0, "left":0, "slave":0x10, "i2c_delay":100, "bayer":2}} x393_sensor.SENSOR_INTERFACE_HISPI: {"width":4384, "height":3288, "top":0, "left":0, "slave":0x10, "i2c_delay":100, "bayer":2},
x393_sensor.SENSOR_INTERFACE_LWIR: {"width":160, "height":120, "top":0, "left":0, "slave":0x2a, "i2c_delay":100, "bayer":2}}
#SENSOR_DEFAULTS_SIMULATION= {x393_sensor.SENSOR_INTERFACE_PARALLEL: {"width":2592, "height":1944, "top":0, "left":0, "slave":0x48, "i2c_delay":100, "bayer":3}, #SENSOR_DEFAULTS_SIMULATION= {x393_sensor.SENSOR_INTERFACE_PARALLEL: {"width":2592, "height":1944, "top":0, "left":0, "slave":0x48, "i2c_delay":100, "bayer":3},
# x393_sensor.SENSOR_INTERFACE_HISPI: {"width":4384, "height":3288, "top":0, "left":0, "slave":0x10, "i2c_delay":100, "bayer":2}} # x393_sensor.SENSOR_INTERFACE_HISPI: {"width":4384, "height":3288, "top":0, "left":0, "slave":0x10, "i2c_delay":100, "bayer":2}}
...@@ -173,6 +175,7 @@ class X393SensCmprs(object): ...@@ -173,6 +175,7 @@ class X393SensCmprs(object):
SENSOR_DEFAULTS[x393_sensor.SENSOR_INTERFACE_HISPI]["height"]= vrlg.WOI_HEIGHT + 4 SENSOR_DEFAULTS[x393_sensor.SENSOR_INTERFACE_HISPI]["height"]= vrlg.WOI_HEIGHT + 4
SENSOR_DEFAULTS[x393_sensor.SENSOR_INTERFACE_HISPI]["top"]= 0 SENSOR_DEFAULTS[x393_sensor.SENSOR_INTERFACE_HISPI]["top"]= 0
SENSOR_DEFAULTS[x393_sensor.SENSOR_INTERFACE_HISPI]["left"]= 0 SENSOR_DEFAULTS[x393_sensor.SENSOR_INTERFACE_HISPI]["left"]= 0
# do not update LWIR defaults !!!
if nomargins: if nomargins:
SENSOR_DEFAULTS[x393_sensor.SENSOR_INTERFACE_PARALLEL]["width"]= vrlg.WOI_WIDTH + 0 # 4 SENSOR_DEFAULTS[x393_sensor.SENSOR_INTERFACE_PARALLEL]["width"]= vrlg.WOI_WIDTH + 0 # 4
SENSOR_DEFAULTS[x393_sensor.SENSOR_INTERFACE_PARALLEL]["height"]= vrlg.WOI_HEIGHT + 0 SENSOR_DEFAULTS[x393_sensor.SENSOR_INTERFACE_PARALLEL]["height"]= vrlg.WOI_HEIGHT + 0
...@@ -1540,9 +1543,9 @@ class X393SensCmprs(object): ...@@ -1540,9 +1543,9 @@ class X393SensCmprs(object):
if histogram_top is None: if histogram_top is None:
histogram_top = 0 histogram_top = 0
if histogram_width_m1 is None: if histogram_width_m1 is None:
histogram_width_m1 = window_width - 33 histogram_width_m1 = window_width - 1 # 33
if histogram_height_m1 is None: if histogram_height_m1 is None:
histogram_height_m1 = window_height - 1145 histogram_height_m1 = window_height - 1 # 1145
self.specify_phys_memory(circbuf_chn_size = circbuf_chn_size) self.specify_phys_memory(circbuf_chn_size = circbuf_chn_size)
""" """
......
...@@ -48,6 +48,7 @@ import subprocess ...@@ -48,6 +48,7 @@ import subprocess
#import x393_sens_cmprs #import x393_sens_cmprs
SENSOR_INTERFACE_PARALLEL = "PAR12" SENSOR_INTERFACE_PARALLEL = "PAR12"
SENSOR_INTERFACE_HISPI = "HISPI" SENSOR_INTERFACE_HISPI = "HISPI"
SENSOR_INTERFACE_LWIR = "LWIR"
class X393Sensor(object): class X393Sensor(object):
DRY_MODE= True # True DRY_MODE= True # True
...@@ -74,8 +75,11 @@ class X393Sensor(object): ...@@ -74,8 +75,11 @@ class X393Sensor(object):
@return "PAR12" or "HISPI" @return "PAR12" or "HISPI"
""" """
if self.DRY_MODE is True: if self.DRY_MODE is True:
print ("===== Running in dry mode, using parallel sensor======")
return SENSOR_INTERFACE_PARALLEL return SENSOR_INTERFACE_PARALLEL
return (SENSOR_INTERFACE_PARALLEL, SENSOR_INTERFACE_HISPI)[self.x393_axi_tasks.read_status(address=0xfe)] # "PAR12" , "HISPI" sens_type = (SENSOR_INTERFACE_PARALLEL, SENSOR_INTERFACE_HISPI,SENSOR_INTERFACE_LWIR)[self.x393_axi_tasks.read_status(address=0xfe)] # "PAR12" , "HISPI"
print ("===== Sensor type read from FPGA = >>> %s <<< ======"%(sens_type))
return sens_type
def program_status_sensor_i2c( self, def program_status_sensor_i2c( self,
num_sensor, num_sensor,
...@@ -155,7 +159,7 @@ class X393Sensor(object): ...@@ -155,7 +159,7 @@ class X393Sensor(object):
address=(vrlg.SENSI2C_STATUS_REG_BASE + num_sensor * vrlg.SENSI2C_STATUS_REG_INC + vrlg.SENSIO_STATUS_REG_REL)) address=(vrlg.SENSI2C_STATUS_REG_BASE + num_sensor * vrlg.SENSI2C_STATUS_REG_INC + vrlg.SENSIO_STATUS_REG_REL))
def print_status_sensor_io (self, def print_status_sensor_io (self,
num_sensor="All"): num_sensor="All", sensorType = SENSOR_INTERFACE_PARALLEL):
""" """
Print sensor_io status word (no sync) Print sensor_io status word (no sync)
@param num_sensor - number of the sensor port (0..3) @param num_sensor - number of the sensor port (0..3)
...@@ -164,12 +168,17 @@ class X393Sensor(object): ...@@ -164,12 +168,17 @@ class X393Sensor(object):
if (num_sensor == all) or (num_sensor[0].upper() == "A"): #all is a built-in function if (num_sensor == all) or (num_sensor[0].upper() == "A"): #all is a built-in function
for num_sensor in range(4): for num_sensor in range(4):
print ("\n ==== Sensor %d"%(num_sensor)) print ("\n ==== Sensor %d"%(num_sensor))
self.print_status_sensor_io (num_sensor = num_sensor) self.print_status_sensor_io (num_sensor = num_sensor, sensorType = sensorType)
return return
except: except:
pass pass
status= self.get_status_sensor_io(num_sensor) status= self.get_status_sensor_io(num_sensor)
print ("print_status_sensor_io(%d):"%(num_sensor)) print ("print_status_sensor_io(%d):"%(num_sensor))
if (sensorType == SENSOR_INTERFACE_LWIR):
pass
else:
#last_in_line_1cyc_mclk, dout_valid_1cyc_mclk #last_in_line_1cyc_mclk, dout_valid_1cyc_mclk
""" """
print (" last_in_line_1cyc_mclk = %d"%((status>>23) & 1)) print (" last_in_line_1cyc_mclk = %d"%((status>>23) & 1))
...@@ -194,7 +203,7 @@ class X393Sensor(object): ...@@ -194,7 +203,7 @@ class X393Sensor(object):
print (" vact_alive = %d"%((status>>15) & 1)) print (" vact_alive = %d"%((status>>15) & 1))
print (" hact_ext_alive = %d"%((status>>14) & 1)) print (" hact_ext_alive = %d"%((status>>14) & 1))
# print (" hact_alive = %d"%((status>>13) & 1)) # print (" hact_alive = %d"%((status>>13) & 1))
print (" hact_run = %d"%((status>>13) & 1)) print (" hact_run = %d"%((status>>13) & 1))
print (" locked_pxd_mmcm = %d"%((status>>12) & 1)) print (" locked_pxd_mmcm = %d"%((status>>12) & 1))
print (" clkin_pxd_stopped_mmcm = %d"%((status>>11) & 1)) print (" clkin_pxd_stopped_mmcm = %d"%((status>>11) & 1))
......
...@@ -101,7 +101,10 @@ module status_read#( ...@@ -101,7 +101,10 @@ module status_read#(
initial begin initial begin
ram [DATA_2DEPTH] = FPGA_VERSION; ram [DATA_2DEPTH] = FPGA_VERSION;
`ifdef HISPI `ifdef HISPI
ram [DATA_2DEPTH-1] = 1; //0 - parallel sensor, 1 - HiSPi sensor ram [DATA_2DEPTH-1] = 1; //0 - parallel sensor, 1 - HiSPi sensor, 2 - LWIR 160x120 sensor
`elsif LWIR
ram [DATA_2DEPTH-1] = 2; //0 - parallel sensor, 1 - HiSPi sensor, 2 - LWIR 160x120 sensor
`endif `endif
end end
always @ (posedge axi_clk) begin always @ (posedge axi_clk) begin
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment