Skip to content

X
x393
Commit 1a92200f authored by Andrey Filippov's avatar Andrey Filippov
Browse files
Options

added versions of memory wrappers with output/register resets

parent c9b4e3c5
Hide whitespace changes
Inline Side-by-side
Showing with 761 additions and 0 deletions
wrap/ram18pr_var_w_var_r.v 0 → 100644
View file @ 1a92200f
/*!
* <b>Module:</b> ram18pr_var_w_var_r
* @file ram18pr_var_w_var_r.v
* @author Andrey Filippov
*
* @copyright Copyright (c) 2014 Elphel, Inc.
*
* @brief Dual port memory wrapper, with variable width write and variable width read
* using "SDP" or "TDP" mode of RAMB18E1 (half of RAMB18E1)
* Uses parity bits to extend total data width (minimal width should be >=8).
*
* ram18pr_var_w_var_r.v is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* ram18pr_var_w_var_r.v is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
`include "system_defines.vh"
/*
Same as ram18pr_var_w_var_r, but with resets
Address/data widths
Connect unused data to 1b0, unused addresses - to 1'b1
RAMB18E1 in True Dual Port (TDP) Mode - each port individually
+-----------+---------+---------+---------+
|Data Width | Address | Data | Parity |
+-----------+---------+---------+---------+
| 1 | A[13:0] | D[0] | --- |
| 2 | A[13:1] | D[1:0] | --- |
| 4 | A[13:2] | D[3:0[ | --- |
| 9 | A[13:3] | D[7:0] | DP[0] |
| 18 | A[13:4] | D[15:0] | DP[1:0] |
+-----------+---------+---------+---------+
RAMB18E1 in Simple Dual Port (SDP) Mode
one of the ports (r or w) - 32/36 bits, other - variable
+------------+---------+---------+---------+
|Data Widths | Address | Data | Parity |
+------------+---------+---------+---------+
| 32/ 1 | A[13:0] | D[0] | --- |
| 32/ 2 | A[13:1] | D[1:0] | --- |
| 32/ 4 | A[13:2] | D[3:0[ | --- |
| 36/ 9 | A[13:3] | D[7:0] | DP[0] |
| 36/ 18 | A[13:4] | D[15:0] | DP[1:0] |
| 36/ 36 | A[13:5] | D[31:0] | DP[3:0] |
+------------+---------+---------+---------+
RAMB36E1 in True Dual Port (TDP) Mode - each port individually
+-----------+---------+---------+---------+
|Data Width | Address | Data | Parity |
+-----------+---------+---------+---------+
| 1 | A[14:0] | D[0] | --- |
| 2 | A[14:1] | D[1:0] | --- |
| 4 | A[14:2] | D[3:0[ | --- |
| 9 | A[14:3] | D[7:0] | DP[0] |
| 18 | A[14:4] | D[15:0] | DP[1:0] |
| 36 | A[14:5] | D[31:0] | DP[3:0] |
|1(Cascade) | A[15:0] | D[0] | --- |
+-----------+---------+---------+---------+
RAMB36E1 in Simple Dual Port (SDP) Mode
one of the ports (r or w) - 64/72 bits, other - variable
+------------+---------+---------+---------+
|Data Widths | Address | Data | Parity |
+------------+---------+---------+---------+
| 64/ 1 | A[14:0] | D[0] | --- |
| 64/ 2 | A[14:1] | D[1:0] | --- |
| 64/ 4 | A[14:2] | D[3:0[ | --- |
| 64/ 9 | A[14:3] | D[7:0] | DP[0] |
| 64/ 18 | A[14:4] | D[15:0] | DP[1:0] |
| 64/ 36 | A[14:5] | D[31:0] | DP[3:0] |
| 64/ 72 | A[14:6] | D[63:0] | DP[7:0] |
+------------+---------+---------+---------+
*/
module ram18pr_var_w_var_r
#(
parameter integer REGISTERS = 0, // 1 - registered output
parameter integer LOG2WIDTH_WR = 5, // WIDTH= 9 << (LOG2WIDTH - 3)
parameter integer LOG2WIDTH_RD = 5, // WIDTH= 9 << (LOG2WIDTH - 3)
parameter DUMMY = 0
`ifdef PRELOAD_BRAMS
,
`include "includes/ram18_declare_init.vh"
`endif
)
(
input rclk, // clock for read port
// input [ 9:0] raddr, // read address
input [13-LOG2WIDTH_RD:0] raddr, // read address
input ren, // read port enable
input regen, // output register enable
input rrst, // read reset
input regrst, // register reset
output [(9 << (LOG2WIDTH_RD-3))-1:0] data_out, // data out
input wclk, // clock for read port
input [13-LOG2WIDTH_WR:0] waddr, // write address
input we, // write port enable
input [ 3:0] web, // write byte enable
input [(9 << (LOG2WIDTH_WR-3))-1:0] data_in // data out
);
generate
if (DUMMY)
ram18pr_dummy #(
.LOG2WIDTH_RD(LOG2WIDTH_RD)
) ram18pr_dummy_i (
.data_out(data_out)
);
else if ((LOG2WIDTH_WR == 5) && (LOG2WIDTH_RD == 5))
ram18pr_32w_32r #(
.REGISTERS (REGISTERS)
`ifdef PRELOAD_BRAMS
`include "includes/ram18_pass_init.vh"
`endif
) ram_i (
.rclk (rclk), // input
.raddr (raddr), // input[8:0]
.ren (ren), // input
.regen (regen), // input
.rrst (rrst), // input
.regrst (regrst), // input
.data_out (data_out), // output[35:0]
.wclk (wclk), // input
.waddr (waddr), // input[8:0]
.we (we), // input
.web (web), // input[3:0]
.data_in (data_in) // input[35:0]
);
else if ((LOG2WIDTH_WR == 5) && (LOG2WIDTH_RD < 5))
ram18pr_32w_lt32r #(
.REGISTERS (REGISTERS),
.LOG2WIDTH_RD (LOG2WIDTH_RD)
`ifdef PRELOAD_BRAMS
`include "includes/ram18_pass_init.vh"
`endif
) ram_i (
.rclk (rclk), // input
.raddr (raddr), // input[(>8):0]
.ren (ren), // input
.regen (regen), // input
.rrst (rrst), // input
.regrst (regrst), // input
.data_out (data_out), // output[(<35):0]
.wclk (wclk), // input
.waddr (waddr), // input[8:0]
.we (we), // input
.web (web), // input[3:0]
.data_in (data_in) // input[35:0]
);
else if ((LOG2WIDTH_WR < 5) && (LOG2WIDTH_RD == 5))
ram18pr_lt32w_32r #(
.REGISTERS (REGISTERS),
.LOG2WIDTH_WR (LOG2WIDTH_WR)
`ifdef PRELOAD_BRAMS
`include "includes/ram18_pass_init.vh"
`endif
) ram_i (
.rclk (rclk), // input
.raddr (raddr), // input[8:0]
.ren (ren), // input
.regen (regen), // input
.rrst (rrst), // input
.regrst (regrst), // input
.data_out (data_out), // output[35:0]
.wclk (wclk), // input
.waddr (waddr), // input[(>8):0]
.we (we), // input
.web (web), // input[3:0]
.data_in (data_in) // input[(<35):0]
);
else if ((LOG2WIDTH_WR < 5) && (LOG2WIDTH_RD < 5))
ram18pr_lt32w_lt32r #(
.REGISTERS (REGISTERS),
.LOG2WIDTH_WR (LOG2WIDTH_WR),
.LOG2WIDTH_RD (LOG2WIDTH_RD)
`ifdef PRELOAD_BRAMS
`include "includes/ram18_pass_init.vh"
`endif
) ram_i (
.rclk (rclk), // input
.raddr (raddr), // input[(>8):0]
.ren (ren), // input
.regen (regen), // input
.rrst (rrst), // input
.regrst (regrst), // input
.data_out (data_out), // output[(<35):0]
.wclk (wclk), // input
.waddr (waddr), // input[(>8):0]
.we (we), // input
.web (web), // input[7:0]
.data_in (data_in) // input[(<35):0]
);
endgenerate
endmodule
// Both ports with 32 bit widths
module ram18pr_32w_32r
#(
parameter integer REGISTERS = 0 // 1 - registered output
`ifdef PRELOAD_BRAMS
,
`include "includes/ram18_declare_init.vh"
`endif
)
(
input rclk, // clock for read port
input [8:0] raddr, // read address
input ren, // read port enable
input regen, // output register enable
input rrst, // read reset
input regrst, // register reset
output [35:0] data_out, // data out
input wclk, // clock for read port
input [ 8:0] waddr, // write address
input we, // write port enable
input [ 3:0] web, // write byte enable
input [35:0] data_in // data out
);
localparam PWIDTH_WR=36;
localparam PWIDTH_RD=36;
RAMB18E1
#(
.RSTREG_PRIORITY_A ("RSTREG"), // Valid: "RSTREG" or "REGCE"
.RSTREG_PRIORITY_B ("RSTREG"), // Valid: "RSTREG" or "REGCE"
.DOA_REG (REGISTERS), // Valid: 0 (no output registers) and 1 - one output register (in SDP - to lower 18)
.DOB_REG (REGISTERS), // Valid: 0 (no output registers) and 1 - one output register (in SDP - to lower 18)
.READ_WIDTH_A (PWIDTH_RD), // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
.READ_WIDTH_B (0), // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
.WRITE_WIDTH_A (0), // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
.WRITE_WIDTH_B (PWIDTH_WR), // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
.RAM_MODE ("SDP"), // Valid "TDP" (true dual-port) and "SDP" - simple dual-port
.WRITE_MODE_A ("WRITE_FIRST"), // Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE"
.WRITE_MODE_B ("WRITE_FIRST"), // Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE"
.RDADDR_COLLISION_HWCONFIG ("DELAYED_WRITE"),// Valid: "DELAYED_WRITE","PERFORMANCE" (no access to the same page)
.SIM_COLLISION_CHECK ("ALL"), // Valid: "ALL", "GENERATE_X_ONLY", "NONE", and "WARNING_ONLY"
.INIT_FILE ("NONE"), // "NONE" or filename with initialization data
.SIM_DEVICE ("7SERIES") // Simulation device family - "VIRTEX6", "VIRTEX5" and "7_SERIES" // "7SERIES"
`ifdef PRELOAD_BRAMS
`include "includes/ram18_pass_init.vh"
`endif
) RAMB36E1_i
(
// Port A (Read port in SDP mode):
.DOADO (data_out[15:0]), // Port A data/LSB data[15:0], output
.DOPADOP (data_out[17:16]),// Port A parity/LSB parity[2:0], output
.DIADI (data_in[15:0]), // Port A data/LSB data[15:0], input
.DIPADIP (data_in[17:16]), // Port A parity/LSB parity[2:0], input
.ADDRARDADDR ({raddr[8:0],5'b11111}), // Port A (read port in SDP) address [13:0], unused should be high, input
.CLKARDCLK (rclk), // Port A (read port in SDP) clock, input
.ENARDEN (ren), // Port A (read port in SDP) Enable, input
.REGCEAREGCE (regen), // Port A (read port in SDP) register enable, input
.RSTRAMARSTRAM (rrst), // Port A (read port in SDP) set/reset, input
.RSTREGARSTREG (regrst), // Port A (read port in SDP) register set/reset, input
.WEA (2'b0), // Port A (read port in SDP) Write Enable[2:0], input
// Port B
.DOBDO (data_out[33:18]),// Port B data/MSB data[15:0], output
.DOPBDOP (data_out[35:34]),// Port B parity/MSB parity[2:0], output
.DIBDI (data_in[33:18]), // Port B data/MSB data[31:0], input
.DIPBDIP (data_in[35:34]), // Port B parity/MSB parity[1:0], input
.ADDRBWRADDR ({waddr[8:0],5'b11111}), // Port B (write port in SDP) address [13:0], unused should be high, input
.CLKBWRCLK (wclk), // Port B (write port in SDP) clock, input
.ENBWREN (we), // Port B (write port in SDP) Enable, input
.REGCEB (1'b0), // Port B (write port in SDP) register enable, input
.RSTRAMB (1'b0), // Port B (write port in SDP) set/reset, input
.RSTREGB (1'b0), // Port B (write port in SDP) register set/reset, input
.WEBWE (web) // Port B (write port in SDP) Write Enable[7:0], input
);
endmodule
// Both ports with less than 32 bit widths
module ram18pr_lt32w_lt32r
#(
parameter integer REGISTERS = 0, // 1 - registered output
parameter integer LOG2WIDTH_WR = 4, // WIDTH= 1 << LOG2WIDTH
parameter integer LOG2WIDTH_RD = 4 // WIDTH= 1 << LOG2WIDTH
`ifdef PRELOAD_BRAMS
,
`include "includes/ram18_declare_init.vh"
`endif
)
(
input rclk, // clock for read port
input [13-LOG2WIDTH_RD:0] raddr, // read address
input ren, // read port enable
input regen, // output register enable
input rrst, // read reset
input regrst, // register reset
output [(9 << (LOG2WIDTH_RD-3))-1:0] data_out, // data out
input wclk, // clock for read port
input [13-LOG2WIDTH_WR:0] waddr, // write address
input we, // write port enable
input [ 3:0] web, // write byte enable
input [(9 << (LOG2WIDTH_WR-3))-1:0] data_in // data out
);
localparam PWIDTH_WR = (LOG2WIDTH_WR > 2)? (9 << (LOG2WIDTH_WR - 3)): (1 << LOG2WIDTH_WR);
localparam PWIDTH_RD = (LOG2WIDTH_RD > 2)? (9 << (LOG2WIDTH_RD - 3)): (1 << LOG2WIDTH_RD);
localparam WIDTH_WR = 1 << LOG2WIDTH_WR;
localparam WIDTH_WRP = 1 << (LOG2WIDTH_WR-3);
localparam WIDTH_RD = 1 << LOG2WIDTH_RD;
localparam WIDTH_RDP = 1 << (LOG2WIDTH_RD-3);
wire [15:0] data_out16;
wire [ 1:0] datap_out2;
assign data_out={datap_out2[WIDTH_RDP-1:0], data_out16[WIDTH_RD-1:0]};
wire [WIDTH_WR+15:0] data_in_ext = {16'b0,data_in[WIDTH_WR-1:0]};
wire [15:0] data_in16=data_in_ext[15:0];
wire [WIDTH_WRP+1:0] datap_in_ext = {2'b0,data_in[WIDTH_WR+:WIDTH_WRP]};
wire [1:0] datap_in2= datap_in_ext[1:0];
RAMB18E1
#(
.RSTREG_PRIORITY_A ("RSTREG"), // Valid: "RSTREG" or "REGCE"
.RSTREG_PRIORITY_B ("RSTREG"), // Valid: "RSTREG" or "REGCE"
.DOA_REG (REGISTERS), // Valid: 0 (no output registers) and 1 - one output register (in SDP - to lower 18)
.DOB_REG (REGISTERS), // Valid: 0 (no output registers) and 1 - one output register (in SDP - to lower 18)
.READ_WIDTH_A (PWIDTH_RD), // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
.READ_WIDTH_B (0), // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
.WRITE_WIDTH_A (0), // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
.WRITE_WIDTH_B (PWIDTH_WR), // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
.RAM_MODE ("TDP"), // Valid "TDP" (true dual-port) and "SDP" - simple dual-port
.WRITE_MODE_A ("WRITE_FIRST"), // Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE"
.WRITE_MODE_B ("WRITE_FIRST"), // Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE"
.RDADDR_COLLISION_HWCONFIG ("DELAYED_WRITE"),// Valid: "DELAYED_WRITE","PERFORMANCE" (no access to the same page)
.SIM_COLLISION_CHECK ("ALL"), // Valid: "ALL", "GENERATE_X_ONLY", "NONE", and "WARNING_ONLY"
.INIT_FILE ("NONE"), // "NONE" or filename with initialization data
.SIM_DEVICE ("7SERIES") // Simulation device family - "VIRTEX6", "VIRTEX5" and "7_SERIES" // "7SERIES"
`ifdef PRELOAD_BRAMS
`include "includes/ram18_pass_init.vh"
`endif
) RAMB36E1_i
(
// Port A (Read port in SDP mode):
.DOADO (data_out16), // Port A data/LSB data[15:0], output
.DOPADOP (datap_out2), // Port A parity/LSB parity[1:0], output
.DIADI (16'h0), // Port A data/LSB data[15:0], input
.DIPADIP (2'h0), // Port A parity/LSB parity[1:0], input
.ADDRARDADDR ({raddr,{LOG2WIDTH_RD{1'b1}}}), // Port A (read port in SDP) address [13:0], unused should be high, input
.CLKARDCLK (rclk), // Port A (read port in SDP) clock, input
.ENARDEN (ren), // Port A (read port in SDP) Enable, input
.REGCEAREGCE (regen), // Port A (read port in SDP) register enable, input
.RSTRAMARSTRAM (rrst), // Port A (read port in SDP) set/reset, input
.RSTREGARSTREG (regrst), // Port A (read port in SDP) register set/reset, input
.WEA (2'b0), // Port A (read port in SDP) Write Enable[3:0], input
// Port B
.DOBDO (), // Port B data/MSB data[31:0], output
.DOPBDOP (), // Port B parity/MSB parity[3:0], output
.DIBDI (data_in16), // Port B data/MSB data[31:0], input
.DIPBDIP (datap_in2), // Port B parity/MSB parity[3:0], input
.ADDRBWRADDR ({waddr,{LOG2WIDTH_WR{1'b1}}}), // Port B (write port in SDP) address [13:0], unused should be high, input
.CLKBWRCLK (wclk), // Port B (write port in SDP) clock, input
.ENBWREN (we), // Port B (write port in SDP) Enable, input
.REGCEB (1'b0), // Port B (write port in SDP) register enable, input
.RSTRAMB (1'b0), // Port B (write port in SDP) set/reset, input
.RSTREGB (1'b0), // Port B (write port in SDP) register set/reset, input
.WEBWE (web[3:0]) // Port B (write port in SDP) Write Enable[3:0], input
);
endmodule
// Write port less than 32bits, read port 32 bit widths
module ram18pr_lt32w_32r
#(
parameter integer REGISTERS = 0, // 1 - registered output
parameter integer LOG2WIDTH_WR = 4 // WIDTH= 1 << LOG2WIDTH
`ifdef PRELOAD_BRAMS
,
`include "includes/ram18_declare_init.vh"
`endif
)
(
input rclk, // clock for read port
input [8:0] raddr, // read address
input ren, // read port enable
input regen, // output register enable
input rrst, // read reset
input regrst, // register reset
output [35:0] data_out, // data out
input wclk, // clock for read port
input [13-LOG2WIDTH_WR:0] waddr, // write address
input we, // write port enable
input [ 3:0] web, // write byte enable
input [(9 << (LOG2WIDTH_WR-3))-1:0] data_in // data out
);
localparam PWIDTH_WR = (LOG2WIDTH_WR > 2)? (9 << (LOG2WIDTH_WR - 3)): (1 << LOG2WIDTH_WR);
localparam PWIDTH_RD = 36;
localparam WIDTH_WR = 1 << LOG2WIDTH_WR;
localparam WIDTH_WRP = 1 << (LOG2WIDTH_WR-3);
wire [WIDTH_WR+15:0] data_in_ext = {16'b0,data_in[WIDTH_WR-1:0]};
wire [15:0] data_in16=data_in_ext[15:0];
wire [WIDTH_WRP+1:0] datap_in_ext = {2'b0,data_in[WIDTH_WR+:WIDTH_WRP]};
wire [1:0] datap_in2= datap_in_ext[1:0];
RAMB18E1
#(
.RSTREG_PRIORITY_A ("RSTREG"), // Valid: "RSTREG" or "REGCE"
.RSTREG_PRIORITY_B ("RSTREG"), // Valid: "RSTREG" or "REGCE"
.DOA_REG (REGISTERS), // Valid: 0 (no output registers) and 1 - one output register (in SDP - to lower 18)
.DOB_REG (REGISTERS), // Valid: 0 (no output registers) and 1 - one output register (in SDP - to lower 18)
.READ_WIDTH_A (PWIDTH_RD), // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
.READ_WIDTH_B (0), // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
.WRITE_WIDTH_A (0), // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
.WRITE_WIDTH_B (PWIDTH_WR), // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
.RAM_MODE ("SDP"), // Valid "TDP" (true dual-port) and "SDP" - simple dual-port
.WRITE_MODE_A ("WRITE_FIRST"), // Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE"
.WRITE_MODE_B ("WRITE_FIRST"), // Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE"
.RDADDR_COLLISION_HWCONFIG ("DELAYED_WRITE"),// Valid: "DELAYED_WRITE","PERFORMANCE" (no access to the same page)
.SIM_COLLISION_CHECK ("ALL"), // Valid: "ALL", "GENERATE_X_ONLY", "NONE", and "WARNING_ONLY"
.INIT_FILE ("NONE"), // "NONE" or filename with initialization data
.SIM_DEVICE ("7SERIES") // Simulation device family - "VIRTEX6", "VIRTEX5" and "7_SERIES" // "7SERIES"
`ifdef PRELOAD_BRAMS
`include "includes/ram18_pass_init.vh"
`endif
) RAMB36E1_i
(
// Port A (Read port in SDP mode):
.DOADO (data_out[15:0]), // Port A data/LSB data[15:0], output
.DOPADOP (data_out[17:16]),// Port A parity/LSB parity[3:0], output
.DIADI (16'h0), // Port A data/LSB data[31:0], input
.DIPADIP (2'h0), // Port A parity/LSB parity[3:0], input
.ADDRARDADDR ({raddr[8:0],5'b11111}), // Port A (read port in SDP) address [15:0]. used from [14] down, unused should be high, input
.CLKARDCLK (rclk), // Port A (read port in SDP) clock, input
.ENARDEN (ren), // Port A (read port in SDP) Enable, input
.REGCEAREGCE (regen), // Port A (read port in SDP) register enable, input
.RSTRAMARSTRAM (rrst), // Port A (read port in SDP) set/reset, input
.RSTREGARSTREG (regrst), // Port A (read port in SDP) register set/reset, input
.WEA (2'b0), // Port A (read port in SDP) Write Enable[3:0], input
// Port B
.DOBDO (data_out[33:18]),// Port B data/MSB data[31:0], output
.DOPBDOP (data_out[35:34]),// Port B parity/MSB parity[3:0], output
.DIBDI (data_in16), // Port B data/MSB data[31:0], input
.DIPBDIP (datap_in2), // Port B parity/MSB parity[3:0], input
.ADDRBWRADDR ({waddr,{LOG2WIDTH_WR{1'b1}}}), // Port B (write port in SDP) address [15:0]. used from [14] down, unused should be high, input
.CLKBWRCLK (wclk), // Port B (write port in SDP) clock, input
.ENBWREN (we), // Port B (write port in SDP) Enable, input
.REGCEB (1'b0), // Port B (write port in SDP) register enable, input
.RSTRAMB (1'b0), // Port B (write port in SDP) set/reset, input
.RSTREGB (1'b0), // Port B (write port in SDP) register set/reset, input
.WEBWE (web[3:0]) // Port B (write port in SDP) Write Enable[7:0], input
);
endmodule
// Write port 64 bita, read port - less than 64 bits
module ram18pr_32w_lt32r
#(
parameter integer REGISTERS = 0, // 1 - registered output
// parameter integer LOG2WIDTH_WR = 4, // WIDTH= 1 << LOG2WIDTH
parameter integer LOG2WIDTH_RD = 4 // WIDTH= 1 << LOG2WIDTH
`ifdef PRELOAD_BRAMS
,
`include "includes/ram18_declare_init.vh"
`endif
)
(
input rclk, // clock for read port
input [13-LOG2WIDTH_RD:0] raddr, // read address
input ren, // read port enable
input regen, // output register enable
input rrst, // read reset
input regrst, // register reset
output [(9 << (LOG2WIDTH_RD-3))-1:0] data_out, // data out
input wclk, // clock for read port
input [8:0] waddr, // write address
input we, // write port enable
input [ 3:0] web, // write byte enable
input [35:0] data_in // data out
);
localparam PWIDTH_WR = 36;
localparam PWIDTH_RD = (LOG2WIDTH_RD > 2)? (9 << (LOG2WIDTH_RD - 3)): (1 << LOG2WIDTH_RD);
localparam WIDTH_RD = 1 << LOG2WIDTH_RD;
localparam WIDTH_RDP = 1 << (LOG2WIDTH_RD-3);
wire [15:0] data_out16;
wire [ 1:0] datap_out2;
assign data_out={datap_out2[WIDTH_RDP-1:0], data_out16[WIDTH_RD-1:0]};
RAMB18E1
#(
.RSTREG_PRIORITY_A ("RSTREG"), // Valid: "RSTREG" or "REGCE"
.RSTREG_PRIORITY_B ("RSTREG"), // Valid: "RSTREG" or "REGCE"
.DOA_REG (REGISTERS), // Valid: 0 (no output registers) and 1 - one output register (in SDP - to lower 18)
.DOB_REG (REGISTERS), // Valid: 0 (no output registers) and 1 - one output register (in SDP - to lower 18)
.READ_WIDTH_A (PWIDTH_RD), // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
.READ_WIDTH_B (0), // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
.WRITE_WIDTH_A (0), // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
.WRITE_WIDTH_B (PWIDTH_WR), // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
.RAM_MODE ("SDP"), // Valid "TDP" (true dual-port) and "SDP" - simple dual-port
.WRITE_MODE_A ("WRITE_FIRST"), // Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE"
.WRITE_MODE_B ("WRITE_FIRST"), // Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE"
.RDADDR_COLLISION_HWCONFIG ("DELAYED_WRITE"),// Valid: "DELAYED_WRITE","PERFORMANCE" (no access to the same page)
.SIM_COLLISION_CHECK ("ALL"), // Valid: "ALL", "GENERATE_X_ONLY", "NONE", and "WARNING_ONLY"
.INIT_FILE ("NONE"), // "NONE" or filename with initialization data
.SIM_DEVICE ("7SERIES") // Simulation device family - "VIRTEX6", "VIRTEX5" and "7_SERIES" // "7SERIES"
`ifdef PRELOAD_BRAMS
`include "includes/ram18_pass_init.vh"
`endif
) RAMB36E1_i
(
// Port A (Read port in SDP mode):
.DOADO (data_out16), // Port A data/LSB data[15:0], output
.DOPADOP (datap_out2), // Port A parity/LSB parity[1:0], output
.DIADI (data_in[15:0]), // Port A data/LSB data[15:0], input
.DIPADIP (data_in[17:16]), // Port A parity/LSB parity[1:0], input
.ADDRARDADDR ({raddr,{LOG2WIDTH_RD{1'b1}}}), // Port A (read port in SDP) address [13:0], unused should be high, input
.CLKARDCLK (rclk), // Port A (read port in SDP) clock, input
.ENARDEN (ren), // Port A (read port in SDP) Enable, input
.REGCEAREGCE (regen), // Port A (read port in SDP) register enable, input
.RSTRAMARSTRAM (rrst), // Port A (read port in SDP) set/reset, input
.RSTREGARSTREG (regrst), // Port A (read port in SDP) register set/reset, input
.WEA (2'b0), // Port A (read port in SDP) Write Enable[1:0], input
// Port B
.DOBDO (), // Port B data/MSB data[15:0], output
.DOPBDOP (), // Port B parity/MSB parity[1:0], output
.DIBDI (data_in[33:18]), // Port B data/MSB data[15:0], input
.DIPBDIP (data_in[35:34]), // Port B parity/MSB parity[1:0], input
.ADDRBWRADDR({waddr[8:0],5'b11111}), // Port B (write port in SDP) address [13:0], unused should be high, input
.CLKBWRCLK (wclk), // Port B (write port in SDP) clock, input
.ENBWREN (we), // Port B (write port in SDP) Enable, input
.REGCEB (1'b0), // Port B (write port in SDP) register enable, input
.RSTRAMB (1'b0), // Port B (write port in SDP) set/reset, input
.RSTREGB (1'b0), // Port B (write port in SDP) register set/reset, input
.WEBWE (web[3:0]) // Port B (write port in SDP) Write Enable[7:0], input
);
endmodule
module ram18pr_dummy
#(
parameter integer LOG2WIDTH_RD = 4 // WIDTH= 1 << LOG2WIDTH
)
(
output [(9 << (LOG2WIDTH_RD-3))-1:0] data_out // data out
);
assign data_out=0;
endmodule
wrap/ram18tpr_var_w_var_r.v 0 → 100644
View file @ 1a92200f
/*!
* <b>Module:</b>ram18tpr_var_w_var_r
* @file ram18tpr_var_w_var_r.v
* @date 2015-10-21
* @author Andrey Filippov
*
* @brief Dual port memory wrapper, with variable width write and variable
* width read, using "TDP" mode of RAMB18E1. Same R/W widths in each port.
* Uses parity bits to increase total data width. Widths down to 9 are valid.
*
* @copyright Copyright (c) 2015 Elphel, Inc.
*
* <b>License:</b>
*
* ram18tpr_var_w_var_r.v is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* ram18tpr_var_w_var_r.v is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/> .
*
* Additional permission under GNU GPL version 3 section 7:
* If you modify this Program, or any covered work, by linking or combining it
* with independent modules provided by the FPGA vendor only (this permission
* does not extend to any 3-rd party modules, "soft cores" or macros) under
* different license terms solely for the purpose of generating binary "bitstream"
* files and/or simulating the code, the copyright holders of this Program give
* you the right to distribute the covered work without those independent modules
* as long as the source code for them is available from the FPGA vendor free of
* charge, and there is no dependence on any encrypted modules for simulating of
* the combined code. This permission applies to you if the distributed code
* contains all the components and scripts required to completely simulate it
* with at least one of the Free Software programs.
*/
`timescale 1ns/1ps
`include "system_defines.vh"
/*
Address/data widths
Connect unused data to 1b0, unused addresses - to 1'b1
RAMB18E1 in True Dual Port (TDP) Mode - each port individually
+-----------+---------+---------+---------+
|Data Width | Address | Data | Parity |
+-----------+---------+---------+---------+
| 1 | A[13:0] | D[0] | --- |
| 2 | A[13:1] | D[1:0] | --- |
| 4 | A[13:2] | D[3:0[ | --- |
| 9 | A[13:3] | D[7:0] | DP[0] |
| 18 | A[13:4] | D[15:0] | DP[1:0] |
+-----------+---------+---------+---------+
RAMB18E1 in Simple Dual Port (SDP) Mode
one of the ports (r or w) - 32/36 bits, other - variable
+------------+---------+---------+---------+
|Data Widths | Address | Data | Parity |
+------------+---------+---------+---------+
| 32/ 1 | A[13:0] | D[0] | --- |
| 32/ 2 | A[13:1] | D[1:0] | --- |
| 32/ 4 | A[13:2] | D[3:0[ | --- |
| 36/ 9 | A[13:3] | D[7:0] | DP[0] |
| 36/ 18 | A[13:4] | D[15:0] | DP[1:0] |
| 36/ 36 | A[13:5] | D[31:0] | DP[3:0] |
+------------+---------+---------+---------+
RAMB36E1 in True Dual Port (TDP) Mode - each port individually
+-----------+---------+---------+---------+
|Data Width | Address | Data | Parity |
+-----------+---------+---------+---------+
| 1 | A[14:0] | D[0] | --- |
| 2 | A[14:1] | D[1:0] | --- |
| 4 | A[14:2] | D[3:0[ | --- |
| 9 | A[14:3] | D[7:0] | DP[0] |
| 18 | A[14:4] | D[15:0] | DP[1:0] |
| 36 | A[14:5] | D[31:0] | DP[3:0] |
|1(Cascade) | A[15:0] | D[0] | --- |
+-----------+---------+---------+---------+
RAMB36E1 in Simple Dual Port (SDP) Mode
one of the ports (r or w) - 64/72 bits, other - variable
+------------+---------+---------+---------+
|Data Widths | Address | Data | Parity |
+------------+---------+---------+---------+
| 64/ 1 | A[14:0] | D[0] | --- |
| 64/ 2 | A[14:1] | D[1:0] | --- |
| 64/ 4 | A[14:2] | D[3:0[ | --- |
| 64/ 9 | A[14:3] | D[7:0] | DP[0] |
| 64/ 18 | A[14:4] | D[15:0] | DP[1:0] |
| 64/ 36 | A[14:5] | D[31:0] | DP[3:0] |
| 64/ 72 | A[14:6] | D[63:0] | DP[7:0] |
+------------+---------+---------+---------+
*/
module ram18tpr_var_w_var_r
#(
parameter integer REGISTERS_A = 0, // 1 - registered output
parameter integer REGISTERS_B = 0, // 1 - registered output
parameter integer LOG2WIDTH_A = 4, // WIDTH= 9 << (LOG2WIDTH - 3)
parameter integer LOG2WIDTH_B = 4, // WIDTH= 9 << (LOG2WIDTH - 3)
parameter WRITE_MODE_A = "NO_CHANGE", //Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE"
parameter WRITE_MODE_B = "NO_CHANGE" //Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE"
`ifdef PRELOAD_BRAMS
,
`include "includes/ram18_declare_init.vh"
`endif
)(
input clk_a, // clock for port A
input [13-LOG2WIDTH_A:0] addr_a, // address port A
input en_a, // enable port A (read and write)
input regen_a, // output register enable port A
input we_a, // write port enable port A
input rrst_a, // read reset port A
input regrst_a, // register reset port A
output [(9 << (LOG2WIDTH_A-3))-1:0] data_out_a,// data out port A
input [(9 << (LOG2WIDTH_A-3))-1:0] data_in_a, // data in port A
input clk_b, // clock for port BA
input [13-LOG2WIDTH_B:0] addr_b, // address port B
input en_b, // read enable port B
input regen_b, // output register enable port B
input we_b, // write port enable port B
input rrst_b, // read reset port B
input regrst_b, // register reset port B
output [(9 << (LOG2WIDTH_B-3))-1:0] data_out_b,// data out port B
input [(9 << (LOG2WIDTH_B-3))-1:0] data_in_b // data in port B
);
localparam PWIDTH_A = (LOG2WIDTH_A > 2)? (9 << (LOG2WIDTH_A - 3)): (1 << LOG2WIDTH_A);
localparam PWIDTH_B = (LOG2WIDTH_B > 2)? (9 << (LOG2WIDTH_B - 3)): (1 << LOG2WIDTH_B);
localparam WIDTH_A = 1 << LOG2WIDTH_A;
localparam WIDTH_AP = 1 << (LOG2WIDTH_A-3);
localparam WIDTH_B = 1 << LOG2WIDTH_B;
localparam WIDTH_BP = 1 << (LOG2WIDTH_B-3);
wire [15:0] data_out16_a;
wire [ 1:0] datap_out2_a;
assign data_out_a={datap_out2_a[WIDTH_AP-1:0], data_out16_a[WIDTH_A-1:0]};
wire [15:0] data_out16_b;
wire [ 1:0] datap_out2_b;
assign data_out_b={datap_out2_b[WIDTH_BP-1:0], data_out16_b[WIDTH_B-1:0]};
wire [WIDTH_A+15:0] data_in_ext_a = {16'b0,data_in_a[WIDTH_A-1:0]};
wire [15:0] data_in16_a = data_in_ext_a[15:0];
wire [WIDTH_AP+1:0] datap_in_ext_a = {2'b0,data_in_a[WIDTH_A+:WIDTH_AP]};
wire [1:0] datap_in2_a= datap_in_ext_a[1:0];
wire [WIDTH_B+15:0] data_in_ext_b = {16'b0,data_in_b[WIDTH_B-1:0]};
wire [15:0] data_in16_b = data_in_ext_b[15:0];
wire [WIDTH_BP+1:0] datap_in_ext_b = {2'b0,data_in_b[WIDTH_B+:WIDTH_BP]};
wire [1:0] datap_in2_b= datap_in_ext_b[1:0];
RAMB18E1
#(
.RSTREG_PRIORITY_A ("RSTREG"), // Valid: "RSTREG" or "REGCE"
.RSTREG_PRIORITY_B ("RSTREG"), // Valid: "RSTREG" or "REGCE"
.DOA_REG (REGISTERS_A), // Valid: 0 (no output registers) and 1 - one output register (in SDP - to lower 18)
.DOB_REG (REGISTERS_B), // Valid: 0 (no output registers) and 1 - one output register (in SDP - to lower 18)
.READ_WIDTH_A (PWIDTH_A), // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
.READ_WIDTH_B (PWIDTH_B), // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
.WRITE_WIDTH_A (PWIDTH_A), // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
.WRITE_WIDTH_B (PWIDTH_B), // Valid: 0,1,2,4,9,18 and in SDP mode - 36 (should be 0 if port is not used)
.RAM_MODE ("TDP"), // Valid "TDP" (true dual-port) and "SDP" - simple dual-port
.WRITE_MODE_A (WRITE_MODE_A), // Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE"
.WRITE_MODE_B (WRITE_MODE_B), // Valid: "WRITE_FIRST", "READ_FIRST", "NO_CHANGE"
.RDADDR_COLLISION_HWCONFIG ("DELAYED_WRITE"),// Valid: "DELAYED_WRITE","PERFORMANCE" (no access to the same page)
.SIM_COLLISION_CHECK ("ALL"), // Valid: "ALL", "GENERATE_X_ONLY", "NONE", and "WARNING_ONLY"
.INIT_FILE ("NONE"), // "NONE" or filename with initialization data
.SIM_DEVICE ("7SERIES") // Simulation device family - "VIRTEX6", "VIRTEX5" and "7_SERIES" // "7SERIES"
`ifdef PRELOAD_BRAMS
`include "includes/ram18_pass_init.vh"
`endif
) RAMB18E1_i
(
// Port A (Read port in SDP mode):
.DOADO (data_out16_a), // Port A data/LSB data[15:0], output
.DOPADOP (datap_out2_a), // Port A parity/LSB parity[1:0], output
.DIADI (data_in16_a), // Port A data/LSB data[15:0], input
.DIPADIP (datap_in2_a), // Port A parity/LSB parity[1:0], input
.ADDRARDADDR ({addr_a,{LOG2WIDTH_A{1'b1}}}), // Port A (read port in SDP) address [13:0], unused should be high, input
.CLKARDCLK (clk_a), // Port A (read port in SDP) clock, input
.ENARDEN (en_a), // Port A (read port in SDP) Enable, input
.REGCEAREGCE (regen_a), // Port A (read port in SDP) register enable, input
.RSTRAMARSTRAM (rrst_a), // Port A (read port in SDP) set/reset, input
.RSTREGARSTREG (regrst_a), // Port A (read port in SDP) register set/reset, input
.WEA ({2{we_a}}), // Port A (read port in SDP) Write Enable[1:0], input
// Port B
.DOBDO (data_out16_b), // Port B data/MSB data[31:0], output
.DOPBDOP (datap_out2_b), // Port B parity/MSB parity[3:0], output
.DIBDI (data_in16_b), // Port B data/MSB data[31:0], input
.DIPBDIP (datap_in2_b), // Port B parity/MSB parity[3:0], input
.ADDRBWRADDR ({addr_b,{LOG2WIDTH_B{1'b1}}}), // Port B (read port in SDP) address [13:0], unused should be high, input
.CLKBWRCLK (clk_b), // Port B (write port in SDP) clock, input
.ENBWREN (en_b), // Port B (write port in SDP) Enable, input
.REGCEB (regen_b), // Port B (write port in SDP) register enable, input
.RSTRAMB (rrst_b), // Port B (write port in SDP) set/reset, input
.RSTREGB (regrst_b), // Port B (write port in SDP) register set/reset, input
.WEBWE ({4{we_b}}) // Port B (write port in SDP) Write Enable[3:0], input
);
endmodule
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment