added configuration file

motosat.conf

+motosat_ip=        "192.168.1.250"
+modem_ip =         "192.168.0.1"
+AZ_CPD =              12.74445
+EL_CPD =              75.78567
+SK_CPD =               8.34;
+AZ_0 =                 0.0;    // degrees
+EL_0 =                 0.0;    // degrees
+SK_0 =                55.7554; // degrees
+AZ_CMAX =           4790;
+EL_CMAX =          10979;
+SK_CMAX =            931;
+MODEM_THRESHOLD =     17.0; // consider something if modem strength is above
+OVERSHOOT =            2; // 1; // final steps absolute error
+LATE_STOP_AZ =        30; // steps
+
+;; Rescan azimuth after noticed a satellite during area scan
+AZ_PLAY =             1.0;         // Hysteresis caused by mechanical play (degrees)
+AZ_RESCAN =           8;         // (degrees) around expected center
+AZ_RESCAN_STEP =      0.5; // (degrees)
+
+EL_PLAY =             1.0;         // Hysteresis caused by mechanical play (degrees)
+EL_RESCAN =           8;         // (degrees) around expected center
+EL_RESCAN_STEP =      0.5; // (degrees)
+
+AZ_2D_RANGE =         2.0;     // degrees 2D peaking scan azimuth (full range)
+EL_2D_RANGE =         3.0;     // degrees 2D peaking scan alevation (full range)
+AZ_2D_STEP  =         0.25;    // degrees
+EL_2D_STEP  =         0.4;     // degrees
+ADJUST_2D =           1;       // 1 - adjust 2D, 0 - skip (only separate azimuth and elevation
+USABLE_FRACT =        0.6;  // use ony samples not less than this fraction of maximal
+USABLE_POW =          1.0;  // transform (maxstrengh - strengh) by applying pow - 1.2 ...1.3 may have marginal improvements
+ARGMAX_OURSIDE =      0.2;  // Allow  argmax outside of the measured range by this fraction 
+ARGMAX_OURSIDE_2D =   0.0;  // Allow  argmax outside of the measured range by this fraction during 2D peaking
+;; Modem never allows wrong satellite to have signal strength above 29, and tries to maintain 30 for the correct one when the signal falls below.
+;; So these values can not be used for peaking(maybe only remove 30 if the signal is going down?)
+;;HUGHES_BAD_STRENGTHS = array(29,30);
+HUGHES_BAD_STRENGTHS[0] = 29;
+HUGHES_BAD_STRENGTHS[1] = 30;
+HUGHES_THRESHOLD =   30;  // if less - wrong satellite
+GUARD_AZIMUTH    =    2.0; // (degrees) do not look for satellites closer than this to alerady found
+GUARD_STEP       =    1.0; // (degrees) If will peak on the same satellite, increase guard range on that side
+AZ_TOL           =    0.7; // (degrees) If satellites azimuths differ by less than this - they are the same
+MAX_ARC_TILT     =    0.2; // maximal local satellite arc tilt near a known satellite
+SAT_AZ_STEP      =    0.5; // (degrees) mark found satellites with this resolution
+LOG_PATH =           "/home/eyesis/git/motosat/attic/logs/test07.log";