formatting

README.md

@@ -66,6 +66,16 @@ Extra output at *build/tmp/work/.../ezynq-u-boot/${PV}_${PR}/git/u-boot-xlnx/*:
 
 ## Booting
 
-Please see the associated README for the target machine, located in the
-associated sub-layer.
-***
+### SD Card Boot
+**Note:** This boot flow generates a bootable **boot.bin**.
+
\ No newline at end of file
+1. Copy **boot.bin** onto the SD Card.
+* (might not work) Copy the following to the SD card (ensure to rename the files where appropriate):
+ *  **uImage** - kernel
+ *  **uramdisk.image.gz** (core-image-minimal-<machine name>.ext2.gz.u-boot) - RootFS
+ *  **devicetree.dtb** (uImage-<machine name>.dtb) - Device Tree Blob
+* Insert SD Card, connect UART to Terminal program and boot board (Ensure the
+board is configured for SD Boot).
+* Once in u-boot command line - to boot *uImage* type:
+
+        ezynq> boot

meta-microzed/README

-meta-microzed
-==========
-
-This README file contains information on using the meta-microzed BSP layer.
-
-The Microzed board is an evaluation board by Avnet/Digilent for the Zynq architecture:
-	http://www.microzed.org/
-
-Please refer to the meta-ezynq/README for details regarding patch submission,
-layer dependencies, build process, etc.
-
-Supported Boards/Machines
-=========================
-
-Avnet/Digilent ZedBoard (Zynq) - 'microzed'
-
-Reference files and documents
-=============================
-	http://www.microzed.org/
-
-SD Card Boot
-============
-
-Note: This boot flow generates a working boot.bin.
-
-Copy 'boot.bin' onto the SD Card.
-
-Might not work:
-#Copy the following to the SD card (ensure to rename the files where appropriate):
-#	Kernel: uImage
-#	RootFS: uramdisk.image.gz (core-image-minimal-<machine name>.ext2.gz.u-boot)
-#	DTB:    devicetree.dtb (uImage-<machine name>.dtb)
-
-Insert SD Card, connect UART to Terminal program and boot board (Ensure the
-board is configured for SD Boot).
-
-When in u-boot comand line to boot uImage type:
-u-boot> boot
\ No newline at end of file

meta-microzed/README.md

+# meta-microzed
+***
+This *README* file contains information on using the *meta-microzed* BSP layer.
+
+The [MicroZed board](http://www.microzed.org/) is an evaluation board by Avnet for the Zynq architecture.
+	
+Please refer to the *meta-ezynq/README* for details regarding patch submission,
+layer dependencies, build process, etc.
+
+***
+## Supported Boards/Machines
+* **Avnet MicroZed (Zynq) - "microzed"**
+
+## Reference files and documents
+[http://www.microzed.org](http://www.microzed.org)
+
+## SD Card Boot
+**Note:** This boot flow generates a bootable **boot.bin**.
+
+1. Copy **boot.bin** onto the SD Card.
+* (might not work) Copy the following to the SD card (ensure to rename the files where appropriate):
+ *  **uImage** - kernel
+ *  **uramdisk.image.gz** (core-image-minimal-<machine name>.ext2.gz.u-boot) - RootFS
+ *  **devicetree.dtb** (uImage-<machine name>.dtb) - Device Tree Blob
+* Insert SD Card, connect UART to Terminal program and boot board (Ensure the
+board is configured for SD Boot).
+* Once in u-boot command line - to boot *uImage* type:
+
+        ezynq> boot