formatting

README.md

-meta-ezynq
-===========
-
+# meta-ezynq
+***
 This layer provides an unofficial support for Xilinx Zynq architecture 
 as well as evaluation boards.
 
-ezynq-u-boot creates bootable image without any extra proprietary tools required.
+*ezynq-u-boot* creates bootable image without any extra proprietary tools required.
 It does not support secure boot functionality and loading the FPGA (PL) part 
 with a bitstream - it is planned to do under the control of the operating system - 
 if needed this feature can be implemented using u-boot...
+***
+## Supported boards/machines
+Boards supported by this layer and sub-layers:
 
-Supported Boards/Machines
-=========================
-
-Boards Supported by this layer and sub-layers:
-	* Avnet/Digilent MicroZed (Zynq)
-
-Dependencies
-============
-
+* **Avnet MicroZed (Zynq)**
+***
+## Dependencies
 This layer depends on:
 
-	URI: git://git.openembedded.org/bitbake
-
-	URI: git://git.openembedded.org/openembedded-core
-	layers: meta
-
-	(for external toolchains only)
-	URI: git://github.com/MentorEmbedded/meta-sourcery.git
-	layers: meta-sourcery
-
-	URI: git://github.com/Xilinx/u-boot-xlnx.git;branch=master-next
+* URI: *git://git.openembedded.org/bitbake*
+* URI: *git://git.openembedded.org/openembedded-core*, layers: meta 
+* URI: *git://github.com/MentorEmbedded/meta-sourcery.git*, layers: meta-sourcery (for external toolchains only)
+* URI: *git://github.com/Xilinx/u-boot-xlnx.git*, branch=master-next
+* URI: *git://git.code.sf.net/p/elphel/ezynq*
+***
+## Sub-layers
 
-	URI: git://git.code.sf.net/p/elphel/ezynq
-
-Sub-Layers
-==========
-
-This repository contains the meta-elphel layer as well as additional board
+This repository contains the meta-ezynq layer as well as additional board
 specific layers. Each of these board specific layers provide additional
 configuration for the associated board. Please refer to the associated README
 in each sub-layer for more details.
 
 Note: sub-layers have no dependency between each other, all sub-layers can be
 used at the same time without conflicts.
-
-Build Instructions
-==================
-
+***
+## Build instructions
 The following instructions require a Poky installation (or equivalent).
 
-Initialize a build using the 'oe-init-build-env' script in Poky. Once
-initialized configure bblayers.conf by adding the 'meta-elphel' layer as
+Initialize a build using the *oe-init-build-env* script in Poky. Once
+initialized configure *bblayers.conf* by adding the *meta-ezynq* layer as
 well as any or all of the sub-layers of this repository, e.g.:
 
 	meta-ezynq \
 	meta-ezynq/meta-microzed \
 
-To build a specific target BSP configure the associated machine in local.conf:
+To build a specific target BSP configure the associated machine in *local.conf*:
 (See associated sub-layers for available machines and additional details)
 
 	MACHINE ?= "microzed"
@@ -66,58 +52,20 @@ Build U-Boot:
 	$ bitbake ezynq-u-boot
 
 Once complete the images for the target machine will be available in the output
-directory 'tmp/deploy/images'.
+directory *tmp/deploy/images*.
 
 Images generated:
-	* boot.bin (fsbl is not required to boot)
 
-Extra Output at 'build/tmp/work/.../ezynq-u-boot/${PV}_${PR}/git/u-boot-xlnx/':
-	* u-boot.html - configuration settings overview
-	* u-boot.map - the bootloader's memory map
-	* u-boot - ELF file
+* **boot.bin** (fsbl is not required to boot)
+
+Extra output at *build/tmp/work/.../ezynq-u-boot/${PV}_${PR}/git/u-boot-xlnx/*:
 
-Booting
-=======
+* **u-boot.html** - configuration settings overview
+* **u-boot.map** - the bootloader's memory map
+* **u-boot** - ELF file
+***
+## Booting
 
 Please see the associated README for the target machine, located in the
 associated sub-layer.
-
-Configuring External Toolchain
-==============================
-
-In order to build with an external toolchain some additional configuration must
-be set in the build environments local.conf. The 'meta-sourcery' layer must also
-be setup in your bblayers.conf
-
-First configure the use of an external toolchain, including the location to the
-toolchain (this example is for a microblazeel toolchain, ensure that you insert
-the relevant information for your target machine and target toolchain):
-
-	TCMODE = "external-csl"
-	CSL_TARGET_SYS_<machine name> = "microblazeel-xilinx-linux-gnu"
-	EXTERNAL_TOOLCHAIN = "<path to toolchain>/microblazeel-xilinx-linux-gnu"
-	EXTERNAL_TOOLCHAIN_SYSROOT = "<path to toolchain>/microblazeel-xilinx-linux-gnu/microblazeel-xilinx-linux-gnu/libc"
-	INSANE_SKIP_external-sourcery-toolchain-dev += "ldflags"
-
-Additionally the preferred provider for various packages must be configured to
-use the external toolchain:
-
-	PREFERRED_PROVIDER_linux-libc-headers = "external-sourcery-toolchain"
-	PREFERRED_PROVIDER_linux-libc-headers-dev = "external-sourcery-toolchain"
-	PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}gcc = "external-sourcery-toolchain"
-	PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}gcc-initial = "external-sourcery-toolchain"
-	PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}gcc-intermediate = "external-sourcery-toolchain"
-	PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}g++ = "external-sourcery-toolchain"
-	PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}binutils = "external-sourcery-toolchain"
-	PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}libc-initial = "external-sourcery-toolchain"
-	PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}libc-for-gcc = "external-sourcery-toolchain"
-	PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}compilerlibs = "external-sourcery-toolchain"
-	PREFERRED_PROVIDER_libgcc = "external-sourcery-toolchain"
-	PREFERRED_PROVIDER_eglibc = "external-sourcery-toolchain"
-	PREFERRED_PROVIDER_virtual/libc = "external-sourcery-toolchain"
-	PREFERRED_PROVIDER_virtual/libintl = "external-sourcery-toolchain"
-	PREFERRED_PROVIDER_virtual/libiconv = "external-sourcery-toolchain"
-	PREFERRED_PROVIDER_glibc-thread-db = "external-sourcery-toolchain"
-	PREFERRED_PROVIDER_virtual/linux-libc-headers = "external-sourcery-toolchain"
-	PREFERRED_PROVIDER_virtual/linux-libc-headers-dev = "external-sourcery-toolchain"
-	PREFERRED_PROVIDER_gdbserver = "external-sourcery-toolchain"
+***
\ No newline at end of file